Direct-Fired Heating, Ventilation and Pressurization Systems

Size: px

Start display at page:

Download "Direct-Fired Heating, Ventilation and Pressurization Systems"

Shauna Andrews
5 years ago
Views:

1 2000-Series irect-ired Heating, Ventilation and Pressurization Systems imension and Selection uide N: 100% OUTSI IR ONLY

2 2000-Series Selection uide NOT: ll information provided in this table is based on the assumption that the unit is at sea level. = onsult actroy * ased on MU-Style. Other styles may vary. Please consult factory or manual for further information. ** d is measured at 10' (3 m) from unducted discharge. *** Maximum Inlet as Pressure: NSI - ompliant Manifold ( - ) = 14 in wc (34.9 mbar) NSI - ompliant Manifold ( ) = 5 psi (344.7 mbar) M and XL Insurance (formerly-iri) - ompliant Manifold (ll Models) = 5 psi (344.7 mbar) 2 irflow M (m 3 /h) Model Motor HP at Noted xternal Static Pressure (in wc0 d at Noted (in wc)** xternal Static Pressure Heat Input at Maximum Temperature Rise* (tu/h) X 1000 Minimum Inlet as Pressure in wc (mbar)*** Manifold Size in NPT (mm) N LP 1,000 (1,700) (17.5) 0.75 (19) 2,000 (3,400) (17.5) 0.75 (19) 3,000 (5,100) (17.5) 0.75 (19) 4,000 (6,800) (17.5) 0.75 (19) 4,000 (6,800) (17.5) 1.0 (25) 5,000 (8,500) (17.5) 1.0 (25) 6,000 (10,200) (17.5) 1.0 (25) 7,000 (11,900) (17.5) 1.0 (25) 8,000 (13,600) (17.5) 1.0 (25) 9,000 (15,300) (17.5) 1.0 (25) 10,000 (17,000) (17.5) 1.0 (25) 7,000 (11,900) (17.5) 1.25 (32) 8,000 (13,600) (17.5) 1.25 (32) 9,000 (15,300) (17.5) 1.25 (32) 10,000 (17,000) , (17.5) 1.25 (32) 11,000 (18,700) , (17.5) 1.25 (32) 12,000 (20,400) ,296 1,037 7 (17.5) 1.25 (32) 13,000 (22,100) ,404 1,123 7 (17.5) 1.25 (32) 14,000 (23,800) ,512 1,210 7 (17.5) 1.25 (32) 12,000 (20,400) ,296 1,037 9 (22.5) 1.5 (38) 14,000 (23,800) ,512 1,210 9 (22.5) 1.5 (38) 16,000 (27,200) ,728 1,382 9 (22.5) 1.5 (38) 18,000 (30,600) ,944 1,555 9 (22.5) 1.5 (38) 20,000 (34,000) ,160 1,728 9 (22.5) 1.5 (38) 22,000 (37,400) ,376 1,901 9 (22.5) 1.5 (38) 25,000 (42,500) ,700 2,160 9 (22.5) 1.5 (38) 25,000 (42,500) ,700 2, (27.5) (51) 27,500 (46,700) ,970 2, (27.5) (51) 30,000 (51,000) ,240 2, (27.5) (51) 32,500 (55,200) ,510 2, (27.5) (51) 35,000 (59,500) ,780 3, (27.5) (51) 37,500 (63,700) ,050 3, (27.5) (51) 40,000 (68,000) ,320 3, (27.5) (51) 35,000 (59,500) , (38-76) 37,500 (63,700) , (38-76) 40,000 (68,000) , (38-76) N/ 42,500 (72,200) , (38-76) 45,000 (76,500) , (38-76) 47,500 (80,700) , (38-76) onsult 45,000 (76,500) , (38-76) actory 47,500 (80,700) , (38-76) 50,000 (85,000) , (38-76) 52,500 (89,200) ,670 N/ (38-76) 55,000 (93,400) , (38-76) 57,500 (97,700) , (38-76) 60,000 (101,900) , (38-76)

3 IRTIONS: 2040 & 2050 Manifold Selection harts To alculate H: - or N Unit: 1 MH = 1,000 tu/h = 1 H = MH (m 3 /h) - or LP Unit: 1 MH = 1,000 tu/h =.65 H = MH (m 3 /h) Select a point on the chart that represents the intersection of the inlet gas pressure and the unit H. Select the manifold size to the right of this point. Natural as low vs. Pressure rop using the Maxon NP burner for 2040 & 2050 (specific gravity = 0.64) or other models, see page 2 for manifold sizes Required as Manifold Inlet (in wc) " " 2.5" " ubic eet per Hour (H) Natural as low vs. Pressure rop using the Maxon NP burner for 2040 & 2050 (specific gravity = 0.64) or other models, see page 2 for manifold sizes Required as Manifold Inlet (millibars) mm 51 mm 64 mm 76 mm ubic Meters per Hour (m 3 /h) 3

4 Upright Model imensions N Lifting Lug (One ach orner) Q L or R L R M -OH S K ilter ccess ILTR STION (OPTIONL) ilter ccess O STN (OPTIONL) O U N VIW SI VIW INT IMNSIONS Model M K L M N P Q S U W X 1,000-3,000 4,

5 Horizontal Model imensions ilter ccess M O W S T or N PLN VIW -OH X INLT HOO (OPTIONL) ILTR STION (OPTIONL) ilter ccess L T Lifting Lugs (One ach orner) O SI VIW P Q Model STIMT SHIPPIN WIHTS (lb) (kg) ir Handler LN = ottom ischarge = ontrol nclosure = as onnection = nd ischarge L = Left ischarge O = Outside ir R = Return ir (Optional) R = Right ischarge T = Top ischarge OH = Opposite Hand Skid IMPORTNT NOTS: Shipping weights apply to both horizontal and upright models. ll dimensions and weights are subject to change without notice. Outdoor air duct size varies. onsult factory. ontrol enclosure is located on the left side of the air handler when looking downstream into the inlet end. 5

6 2010, 2010, & Upright Model imensions Lifting Lug (One ach orner) P T L or R L R H H J KK Y U V R -OH M R S N ilter ccess ILTR STION (OPTIONL) O ilter ccess O STN (OPTIONL) N VIW INT IMNSIONS SI VIW Model H J M N P Q R S T U V W Y Z 2010/ *Refer to M* in stand chart below * * INT IMNSIONS Model HH KK 2010/ **Refer to ** in stand chart to the right. ** ** N/ N/ STNS Model M* Height ** 2010/

7 2010, 2010, & Horizontal Model imensions -OH -OH H O V U R T or PLN VIW ilter ccess HH H J W Z Y INLT HOO (OPTIONL) ILTR STION (OPTIONL) ilter ccess S T Lifting Lug (One ach orner) O N P SI VIW Support race R R Q T Model 2010/ 2010 STIMT SHIPPIN WIHTS (lb) (kg) (lb) (kg) (lb) (kg) ir Handler , , LN = ottom ischarge = ontrol nclosure = as onnection = nd ischarge L = Left ischarge O = Outside ir R = Return ir (Optional) R = Right ischarge T = Top ischarge OH = Opposite Hand Skid IMPORTNT NOTS: Shipping weights apply to both horizontal and upright models. ll dimensions and weights are subject to change without notice. Outdoor air duct size varies. onsult factory. Support brace required on horizontal units only if both filter section and inlet hood are required. Support brace provided by factory. ontrol enclosure is located on the right side of the air handler when looking downstream into the inlet end. 7

8 2040 & 2050 Upright Model imensions Y JJ L or R L-OH or R-OH L R -OH P R Z R-OH J R O ilter ccess ILTR STION (OPTIONL) LS (OPTIONL) O ilter ccess N VIW SI VIW INT IMNSIONS Model J M P V W X Y Z JJ OTTOM ISHR N/TOP ISHR Model Model STIMT SHIPPIN WIHTS (lb) (kg) (lb) (kg) ir Handler 3, , , ,

9 2040 & 2050 Horizontal Model imensions V X P -OH R or T O W Z Y PLN VIW R-OH -OH or T-OH ilter ccess J INLT HOO (OPTIONL) ILTR STION (OPTIONL) ilter ccess T O JJ M SI VIW R LN = ottom ischarge = ontrol nclosure = as onnection = nd ischarge L = Left ischarge O = Outside ir R = Return ir (Optional) R = Right ischarge T = Top ischarge OH = Opposite Hand IMPORTNT NOTS: Shipping weights apply to both horizontal and upright models. ll dimensions and weights are subject to change without notice. Outdoor air duct size varies. onsult factory. Support brace required on horizontal units only if both filter section and inlet hood are required. Support brace provided by factory. ontrol enclosure is located on the right side of the air handler when looking downstream into the inlet end. 9

10 ilter Sections ILTR STION Inlet 2010/2010 ILTR STION ilter ccess oor Inlet H ilter access through side access door. Inlet ilter SI VIW PLN VIW / ILTR STION 2040/2050 ILTR STION Hinged ilter ccess oor irflow UPRIHT Inlet Inlet HORIZONTL SI VIW Hinged ilter ccess oor PLN VIW H irflow Model ilter Section imensions Permanent luminum Mesh ilters isposable Polyester H Size Qty Size Qty lbs kg N/ N/ N/ N/ N/ 20 x 25 x x 63.5 x x 50 x x 127 x / x 20 x x 50.8 x x 40 x x x x 25 x x 63.5 x x 50 x x 127 x x 20 x 1 & 20 x 25 x 1 16 & x 50.8 x 2.5 & 50.8 x 63.5 x & 8 20 x 60 x x x /2050 UPRIHT N/ N/ N/ N/ N/ 20 x 20 x x 50.8 x x 140 x x x /2050 HORIZONTL N/ N/ N/ N/ N/ 20 x 20 x x 50.8 x x 140 x x x

11 Inlet Hoods K INLT HOO 2040/2050 INLT HOO H J O K PLN VIW O O J SI VIW INLT HOO K PLN VIW H O O Model J Screen Mesh Location (Optional) Screen Mesh Location (Optional) ilter Rail Moisture Limiter Rail (Optional) PLN VIW SI VIW Inlet Hood imensions K ilter Rail Moisture Limiter Rail (Optional) O SI VIW Inlet Variations (See Notes) Permanent luminum Mesh ilters Size Qty Moisture Limiter H J K lbs kg Size Qty lbs kg x 25 x x 63.5 x N/ N/ N/ N/ 2010/ x 20 x x 60 x x 50.8 x x x x 25 x x 63.5 x x 96 x x x x 25 x 1 & x 50.8 x x 96 x 5.5 & 50.8 x x x 14.0 x 2.5 & 5 20 x 20 x 1 & / N/ N/ N/ N/ N/ N/ N/ 24 x 24 x x 61.0 x 5.1 IMPORTNT NOTS: Inlet hood is also available with screen mesh, no filters. Inlet variation of screen mesh without filters has equal weight as inlet hoods with filters, with the exception of 2040 and 2050 (less 120 lbs/54 kg to filtered variation) x 96 x x x

12 ischarge Heads - THR-WY ISHR H 2040/2050 ON-WY ISHR H THR-WY ISHR H IMNSIONS Model 2010/ lbs kg ON-WY ISHR H IMNSIONS Model IMPORTNT NOTS: lbs kg ischarge head must be field supported by others. ischarge head has manually adjustable horizontal blades. 12

13 Splash Plates - SPLSH PLT ir Handler O H 2040/2050 SPLSH PLT Splash Plate H Models - Models 2040/2050 1/2" x 13 Threaded rod and nuts (Provided by Others) 1" (2.5 cm) uctliner (Provided) Nuts and Washers (Provided by Others) Nuts and Washers (Provided by Others) 1" (2.5 cm) uctliner (Provided) SPLSH PLT IMNSIONS Model 2010/ / (min) (max) H lbs kg N/ N/ N/ N/ IMPORTNT NOTS: - require four threaded rods and 2050 require six threaded rods. 13

14 Legs - LS INLT INLT H INLT INLT VIW RIHT SI VIW our Support Legs Required L IMNSIONS Model H (See Note) 2010/ (each leg) lbs kg Leg Height 14 SI VIW 2040/2050 LS 2040/2050 L IMNSIONS our Support Legs Required PLN VIW Leg Height IMPORTNT NOTS: (each leg) lbs kg control enclosure is located on the left side of the air handler when looking downstream of the inlet end. 24" (61 cm) and 36" (91.4 cm) leg heights are not available for upright units. 48" (121.9 cm) minimum leg height without filter section for " (152.4 cm) minimum leg height without filter section for " (182.9 cm) minimum leg height with a filter section for " (243.8 cm) minimum leg height with a filter section for 2050.

15 Stands 30" UPRIHT STN RONT VIW SI VIW PLN VIW 30" UPRIHT STN IMNSIONS Model lbs kg "/72" UPRIHT STN RONT VIW SI VIW PLN VIW 53"/72" UPRIHT STN IMNSIONS Model 2010/ (53") / (72") lbs kg IMPORTNT NOTS: 1/4" angle iron construction. 15

16 Suspension Kits SUSPNSION KIT 1/2" x 13 Threaded rod and nuts (Provided by Others) Suspension nd Suspension nd 1/2" x 13 Threaded rod and nuts (Provided by Others) 2010/2010 SUSPNSION KIT Suspension nd Suspension Sides asket Tape (Provided by Others) Suspension nd Single Nut (Provided by Others) (enter Line) Nuts and olts (Provided) ouble Nuts (Provided by Others) 16 SUSPNSION KIT IMNSIONS Model 2010/ lbs kg N/ N/ N/

17 Roof urbs ROO UR N & URNR STION 19" (50 cm) Seam aulk required for outside perimeter of roof curb at bolted joints. 1.5" (3.8 cm) 3" (7.6 cm) Top Mounting lange nd piece top flange is flush with side top flange. nd Panel (Inlet or discharge) Side Panel rackets mount to the outside of the panels. ROO UR IMNSIONS Model 2010/ /2050 IMPORTNT NOTS: urb is shipped unassembled. ll dimensions are from the outside. urb material is 16 gauge galvanized steel for - and 14 gauge galvanized steel for 2040 and Nuts and bolts (3/8" x 1") are furnished. aulk all joints before assembling. (aulk provided by others) have seam in roof curb. When measuring dimensions and, include the top mounting flange width on both sides. lbs kg N/ N/

18 Inlet ampers MOTORIZ INLT MPR irflow / MOTORIZ INLT MPR irflow Upper amper irflow Lower amper Model amper lbs * kg UPPR LOWR UPPR LOWR MOTORIZ INLT MPR IMNSIONS Model 2010/ *Refer to chart above for and weights lbs kg N/ N/ * * N/ N/ * *

19 - MOTORIZ ISHR MPR ischarge ampers irflow MOTORIZ ISHR MPR IMNSIONS Model lbs kg / IMPORTNT NOTS: Number of louvers will vary by model. Inlet dampers are mounted upstream of the air handler, directly to the air handler. Inlet dampers also available to ship loose. Inlet dampers for MU style use both the upper and lower dampers for and. Inlet dampers for R, M and VV styles only use the upper damper for and. ischarge dampers do not mount directly to the air handler; they mount downstream of the air handler in ductwork. 19

20 Service Platform 2040/2050 SRVI PLTORM ir Handler Legs (Optional) Ladder (Provided by Others) SRVI PLTORM IMNSIONS Model 2040/ lbs kg Installation ode and nnual Inspections: ll installation and service of RPI equipment must be performed by a contractor qualified in the installation and service of equipment sold and supplied by Rapid ngineering LL and conform to all requirements set forth in the Rapid ngineering LL manuals and all applicable governmental authorities pertaining to the installation, service and operation of the equipment. To help facilitate optimum performance and safety, Rapid ngineering LL recommends that a qualified contractor conduct, at a minimum, annual inspections your RPI equipment and perform service where necessary, using only replacement parts sold and supplied by Rapid ngineering LL. urther Information: pplications, engineering and detailed guidance on systems design, installation and equipment performance is available through RPI representatives. Please contact us for any further information you may require, including the Installation, Operation and Service Manual. These products are not for residential use. This document is intended to assist licensed professionals in the exercise of their professional judgment. Rapid ngineering LL 1100 Seven Mile Road NW omstock Park, MI Telephone: Toll ree: ax: Rapid ngineering LL ll rights reserved. No part of this work covered by the copyrights herein may be reproduced or copied in any form or by any means graphic, electronic, or mechanical, including photocopying, recording, taping, or information storage and retrieval systems without written permission of Rapid ngineering LL. Printed in U.S.. RP2SN 1M 0411 Rev

Direct-Fired Heating, Ventilation and Pressurization Systems

Direct-Fired Heating, Ventilation and Pressurization Systems 2000-Series irect-ired Heating, Ventilation and Pressurization Systems imension and Selection uide 1.800.536.3461 www.rapidengineering.com N: 100% Outside ir Only 2000-Series Selection uide M (m 3 /h)