Electronic Faucet 1500T & 1501T Series

Transcription

1 Electronic Faucet 1500T & 1501T Series Specification: (example) Battery (4 cell) or Hardwire (24 V) infrared electronic handwash system H 2OPTIS technology no external adjustments required hrome plated one piece cast main body with integral sensor and rigid spout djustable sensing range and timeout udible low battery indicator Forged brass solenoid valve (control box No. 0 only) Tempered water supplied to solenoid valve, (except control box options No. 0 and 1) and... with... (specify battery or hardwire) Engineer/rchitect pproval with... (add spout required) with... (add outlet required) Model Specified: with... (add control box required) pproval: with... (transformer - specify separately - See Back Page) Date: 1501T3470 Hardwire Battery Operated DESRIPTION 1500T3 1501T3 PRODUT NO. SPOUT & SENSOR OUTET ONTRO BOX Base Model with Surface Mount Housing* SEE Specification Drawing # Vandal Resistant 1.5 USGPM (5.7 /min.) aminar w/gion ntimicrobial 2 2 For REESSED MOUNTING omponents SSEMBED in 10" Box w/s/s over. * SEE Specification Drawing # (R5) Single Hole Deckmount Gooseneck Spout with Integral Sensor in Base (1) (R5) Deckmount Gooseneck Spout with Integral Sensor in Base and 4" Forged overplate (1) (R5) Deckmount Gooseneck Spout with Integral Sensor in Base and 8" Forged overplate (1) Vandal Resistant USGPM (5.7 /min.) 3 Flow ontrol erator Smooth End, aminar Flow ontrol in Base of Gooseneck Spout 1.1 USGPM (4.2/min.) For REESSED MOUNTING omponents & Mechanical Mixing Valve (2) SSEMBED in 10" Box w/s/s over. SEE Specification Drawing #11 For REESSED MOUNTING omponents & Thermostatic Mixing Valve SSEMBED in 10" Box w/s/s over. SEE Specification Drawing #12 * Mixing Valve supplied by others. Flowrates are at 60 PSI. (1) No Optional Spouts vailable. (2) With Thermostatic imit Stop. Refer to for individual models. Note: Use this page front and back, with specification drawing page referenced above, as product submittal sheets. Page 5..4

2 pprovals: S certified omplies to SME D ompliant and meets Handicapped ccessibility Standard SME of less than 5 lbs. handle operating force. IPMO listed ontrol Box Option 6 Mechanical Mixing Valve S certified ontrol Box Option 8 Thermostatic Mixing Valve S certified and meets SSE 1016 and 1017 (ontact Delta Representative for State and/or ocal pprovals.) U.S. Patent #6, 826, 455. FOW (l/min.) FOWRTE vs PRESSURE No. 2 aminar Flow Outlet FOW (USGPM) ine Pressure (psig) No. 3 erator Outlet Flowrates Spout Outlets No. 7 Flow ontrol OPERTION: Hands free (touchless) operation. Water flows when sensor is activated. Water flow stops upon de-activiation of sensor. uto shut-off feature that is selectable between 15 to 75 seconds. Factory set to 45 seconds. Will reset once obstruction is removed. djustable sensing distance 76 to 381mm (3" to 15") factory set to 229mm (9") (+/ 1.0 ) ow battery audible beep (for battery models only) will activate after faucet shuts off when approximately 1500 cycles remain. NOTE: For optimum performance of this product,we recommend a system pressure between 20 and 80 PSI static. This product will operate up to a maximum of 125 PSI static per NSI and S requirements. However, we do not recommend pressures above 80 PSI. Thermal expansion or leaking pressure reducing valves may require use of expansion tanks or relief valves to ensure your system never exceeds its maximum intended pressure setting. GOOSENEK SPOUT SSEMBIES Spout/Outlet mm in. mm in. mm in. Gooseneck-Standard (R5) for Outlet #2 and Gooseneck-Standard (R5) for Outlet # T3421 Typical Installation Electronic Faucet 1500T & 1501T Series 1500T & 1501T EETRONI FUET OPTION ESSORIES: TRNSFORMERS: to 24V lass II 20V (Up to 5 Electronic Valves) to 24V lass II 40V (Up to 10 Electronic Valves) to 24V lass II 100V (Up to 25 Electronic Valves) ORDS: Integral Sensor 58mm (2.28") 32mm (1.25") Dia. Hole Required Refer to for individual models. Product supplied as shown by solid lines. ll items shown by dotted lines supplied by others GOOSENEK SPOUT #3 355mm (14") max. Flexible, Sensor 257mm (10.13") ontrol Box Inlet - 1/2" opper (Tempered Water By Others) Watertight onnector OUTET D NO. mm in /8" ompression onnection Watertight onnection 36" ong Sensor overplate 38mm (1.5") Max. Deck Thickness Gooseneck Spout SUPPIED: 3/8" MIP Outlet from Box 3/8" ompression Joint at Spout BNE BY OTHERS 305mm (12") Stainless Steel over Plate 77mm (3.0") 102mm (4") 36" able Extension with Outlet #2 and 3 with Outlet #7 62mm (2.46") 59mm (2.31") 38mm (1.5") Max. Deck Thickness D GOOSENEK SPOUT #4 & #5 #4-102mm (4.0") #5-203mm (8.0") 63.5mm (2.50") 78mm (3.08") D 38mm (1.5") Max. Deck Thickness with Outlet #2 and 3 62mm (2.46") 59mm (2.31") Integral Sensor #4-191mm (7.5") #5-282mm (11.1") 32mm (1.25") Dia. 3 Holes Required 3/8" ompression onnection Watertight onnector 36" ong with Outlet #7 63.5mm (2.50") 78mm (3.08") DSP 1500T Rev.

3 Specification Drawing #9 OMPONENTS ONY UNSSEMBED 1500T ND 1501T PRODUT NO. VVE TYPE OVER 1500T 3 0 Deckmount Handwash Hardwire Surface Mounted,Vandal Proof ontrol Housing 1501T 3 0 Deckmount Handwash Battery Surface Mounted,Vandal Proof ontrol Housing onnector and Hardwire onverter 24V to 6VD. 36mm (1.43") VND PROOF SURFE MOUNT ONTRO HOUSING 146mm (5.73") Recommended 381mm (15" max.) to top of counter 139mm (5.47") 1/8" llen Screw Battery Pack 3/8" ompression onnection Outlet 100mm (3.96") Inlet 3/8" NPT or 3/8" ompression daptor (Supplied) Note: Stainless Steel hose connection supplied between Solenoid Valve and Spout 508mm (20") S/S HOSE 89mm (3.5") MX. 3/8" OMPRESSION FITTING BOTH ENDS Page

4 TEMPERED WTER - SSEMBED ONTRO BOX 1500T ND 1501T Specification Drawing #10 PRODUT NO. FUET TYPE MOUNT TYPE OVER *1500T 3 1 Deckmount Handwash Hardwire Recessed Mount 305mm (12") Stainless Steel *1501T 3 1 Deckmount Handwash Battery Recessed Mount 305mm (12") Stainless Steel *This product is supplied with Flexible Sensor on Recessed Mount Installations. onnector and Hardwire onverter 24V to 6VD. 53mm (2.07") 127mm (5.0") Flexible Sensor (Supplied on Recessed Mount Box) 57mm (2.25") 70mm (2.75") Diameter 25mm (1.0") 203mm (8.0") Outlet 3/8" M.I.P. 257mm (10.13") 305mm (12.0") Stainless Steel over Screwdriver Stop 25mm (1.0") luminum ontrol Box 127mm (5.0") Tempered Water (By Others) Inlet: 1/2" opper 102mm (4.0") 254mm (10.0") Note: For wallhung sink installations, sensor conduit rough-in should be directly under basin to minimize sensor cord exposure. DSP 1500T

5 Specification Drawing #11 MEHNI MIXING VVE SSEMBED ONTRO BOX 1500T ND 1501T PRODUT NO. FUET TYPE MOUNT TYPE OVER *1500T 3 6 Deckmount Handwash Hardwire Recessed Mount 305mm (12") Stainless Steel *1501T 3 6 Deckmount Handwash Battery Recessed Mount 305mm (12") Stainless Steel *This product is supplied with Flexible Sensor on Recessed Mount Installations. onnector and Hardwire onverter 24V to 6VD. 35mm (1.38") 53mm (2.07") Outlet: 3/8" M.I.P. 203mm (8.0") Bracket and battery holder not required for hardwire models Flexible Sensor (Supplied on recessed mount box) 70mm (2.75") Diameter Driver board to be located on this bracket Outlet 3/8" M.I.P. Inlets 1/2" opper 257mm (10.13") 305mm (12.0") Stainless Steel over Screwdriver Stop 102mm (4.0") 254mm (10.0") Mechanical Mixing Valve with hecks and Thermostatic imit Stop Note: For wallhung sink installations, sensor conduit rough-in should be directly under basin to minimize sensor cord exposure. Page

6 Specification Drawing #12 THERMOSTTI MIXING VVE SSEMBED ONTRO BOX 1500T ND 1501T PRODUT NO. FUET TYPE MOUNT TYPE OVER *1500T 3 8 Deckmount Handwash Hardwire Recessed Mount 305mm (12") Stainless Steel *1501T 3 8 Deckmount Handwash Battery Recessed Mount 305mm (12") Stainless Steel *This product is supplied with Flexible Sensor on Recessed Mount Installations. onnector and Hardwire onverter 24V to 6VD. 53mm (2.07") 70mm (2.75") Diameter 35mm (1.38") Outlet: 3/8" M.I.P. 203mm (8.0") Bracket and battery holder not required for hardwire models Flexible Sensor (Supplied on recessed mount box) Driver board to be located on this bracket Outlet 3/8" M.I.P. Inlets 1/2" opper 257mm (10.13") 305mm (12.0") Stainless Steel over Screwdriver Stop 102mm (4.0") Thermostatic Mixing Valve with hecks 254mm (10.0") Note: For wallhung sink installations, sensor conduit rough-in should be directly under basin to minimize sensor cord exposure. DSP 1500TB