244K/324K kw (64 70 net hp) Courtesy of Machine.Market

Transcription

1 244K/324K kw (64 70 net hp)

2 Productive, compact, and ready for anything. Need a compact oader to get big reut? Step up to the tight-turning, heavy-ifting 244K and 324K. Thee veratie machine combine outtanding maneuverabiity, trave peed, breakout force, reach, and tabiity to tacke tak other machine can t. Ociating tereo teering deiver a mooth turning radiu that up to 17-percent tighter than comparabe oader for fater cyce time and better materia retention over rough terrain. Add paciou cab and extra uptime from eaed eectrica connection, more durabe axe, and extended ervice interva, and you ve got mutipurpoe machine that are ready, abe, and wiing to take on whatever work you ve got. 2 3 Key pecification 244K 324K Net peak power 48 kw (64 hp) 52 kw (70 hp) Fu-turn tipping oad 3712 kg (8,183 b.) 4430 kg (9,766 b.) 3 Bucket capacity range m ( cu. yd.) m3 ( cu. yd.) Bucket breakout force 4895 kg (10,792 b.) 5608 kg (12,364 b.) Operating weight 5470 kg (12,060 b.) 6390 kg (14,087 b.)

3 Unique tereo teering make thee compact oader even more productive, for tight turn and extra agiity in coe quarter. 100-percent front differentia ock i eaiy activated through a puh button on the joytick. Extended ervice interva hep maximize uptime. What other ca option, we ca tandard return to dig, quick-couper, high travepeed range, and bucket from m3 ( cu. yd.) for the 244K and m3 ( cu. yd.) for the 324K. EPA Fina Tier 4 (FT4) emiion-certifed fourcyinder diee engine deiver power without compromie. Our deaer can work with you to add additiona oution to meet the pecifc need of your buine, uch a extended warrantie, cutomized maintenance and repair agreement, fuid amping, and much more.

4 Run in ome pretty tight circe. 4 5 Navigating crowded jobite often in t eay. Whie other machine are frequenty forced into three-point turn (or wore), the ociating tereo teering of the nimbe 244K and 324K Loader aow a tight turning radiu (3.51 m [138 in.] for the 244K and 3.78 m [149 in.] for the 324K) for unurpaed maneuverabiity. Deiver higher tipping oad capacitie, too. What more, the hydrotatic drivetrain infnitey variabe range et you preciey match trave peed to the work at hand. So you can inch ahead whie maintaining fu hydrauic power. Or max out at a quick 30 km/h (19 mph) for the 244K and 28 km/h (17 mph) for the 324K. Move more materia, more quicky, and more effcienty. Without running youref ragged.

5 The 244K and 324K turn tight but articuate e, keeping the center of gravity and baat in ine to counteract oad force for uperior fu-turn tipping-oad capacitie. 2. Ociating rear axe and eatic articuation at the pivot mooth the ride for greater materia retention and reduced operator fatigue. 3. With their ong reach, thee compact eaiy dump to the center of tandem-axe truck for quicker and eaier oading Tire on inge-piece rim deiver the traction and tabiity you need. Boom foat aow eay back dragging for fnih grading and ceaning up jobite. Manua ow-peed differentia ock deiver the traction needed to go deeper into the pie for bigger bucket oad. Unike comparabe-ize machine, return-to-dig i tandard.

6 Eay to get in. Eay to get working. 6 7 Cimb aboard and ee why the 244K or 324K take a back eat to nothing. Sound-uppreed wakthrough cab provide ampe eg- and headroom, exceent a-around viibiity, and one mooth ride. Singe ever with F-N-R witch contro a boom and bucket function, and tandard return-todig i jut a fick-of-the-writ away. Gauge in the forward conoe are ceary viibe, intuitive, and eay to read. Tit teering, muti-adjutabe upenion eat, eectronic monitor, convex mirror inide and out, and many more productivity-booting feature are ao tandard.

7 Boom and bucket contro, F-N-R, and differentia ock are on the ame ow-effort ever for convenient ingehanded contro Eay-to-read monitor track rpm, hour, and more. Warning ight aert operator of any machine iue. 3. Low- and high-peed range provide infnitey variabe trave peed from tandti to bet-in-ca tandard peed 30 km/h (19 mph) for the 244K and 28 km/h (17 mph) for the 324K. 4. Ociating axe/eatic articuation reduce cab tit by a much a 50 percent, for a moother ride that eaier on both operator and machine. 4 Highy effcient HVAC ytem hep make your operator even more productive. Automotive-type ouver hep keep the view cear, the cab comfortabe. Inching/brake peda et you ow trave peed whie keeping engine rpm high for optimum hydrauic repone and contro. Or the operator can empoy tandard hift on the fy.

8 Buit to hande the toughet job your. The hardworking 244K and 324K increae uptime with everyday toughne and hep improve your bottom ine with never-ay-die durabiity. They incorporate many of the ame downtime-minimizing feature found on our arger oader, incuding eaed eectrica connector and ef-adjuting wet-dic brake. Hep keep your operator out of harm way, too, with numerou afety feature uch a automatic park brake, bypa-tart protection, ip-reitant tep, and convenient handhod. If it uptime you demand, the 244K and 324K are ready to work wherever and whenever you are. 1. Remote tet port enabe technician to quicky and convenienty troubehoot probem Steering inkage i poitioned where it protected and upported by bracket with eaiy repaceabe wear trip Anged ef-ceaning tep and ergonomicay poitioned grab bar make getting in and out of the cab eaier

9 4. A/C condener tit out and away from the radiator for eaier ceanout. Doen t require draining fuid or diconnecting hoe Wear-reitant hoe are routed where they re protected. Heavyduty articuation joint are trong and durabe. 5 Wet-dic brake in the heavy-duty axe ef-adjut and are eaed from moiture and contaminant for ong, troube-free ife. Proportiona fan run ony a needed to provide optima cooing for reduced wear and tear on cooing component, e noie, and ower fue conumption. Diee engine run quiet and meet EPA Fina Tier 4 (FT4) non-road emiion reguation. So they can work where rigid ound- and air-quaity tandard exit. Acce to the hydrauic oader vave, differentia ock, optiona ride contro, and other component i quick and convenient.

10 If it not one thing, it another Why invet in a bunch of peciaized machine when the highy veratie 244K or 324K can do the job? With a tandard pin-type hydrauic quick-couper, you can go from bucket to fork quicky and eaiy. Or opt for a kid teer Quik-Tatch couper that enabe thee jack-of-a-trade machine to utiize an even wider array of kidteer-compatibe Workite Pro attachment. Operation i eay, with joytick and third- and fourth-function piot contro convenienty ocated at your fngertip. Regarde of how you equip them, the 244K and 324K wi be the mot veratie compact on your workite.

11 1 Unobtructed ine of ight to attachment make witchover quick and eay. Whether you re hutting and or carving through cay, we have the correct bucket for the tak If you change attachment often, you appreciate the optiona puh-buttonactivated kid-teer-tye couper that et you connect and reeae attachment quicky, without too or eaving the eat. 2. Bade, bucket, cod paner, and now bower make thee oader natura for removing whatever Mother Nature put in your way Scrap and bruh-tine grappe et you move a variety of materia from crap bae to branche. 4. The 244K and 324K fee right at home on the farm or the feedot. Equipped with bae pear, fork, or bucket, thee highy maneuverabe compact hande a mutitude of chore.

12 Here the owdown on ow daiy operating cot. We pared no expene to hep keep 244K and 324K operating cot ow. From tranvere-mounted diee engine that provide convenient ground-eve ervice acce, to eay-to-change pin-on fter, thee veratie oader wi require e time and attention, maximizing your uptime. Extended ervice interva, environmentay friendy drain, ight gauge the it of K-Serie feature that hep minimize maintenance goe on and on. And o wi the daiy operating cot aving you enjoy. Locking fue cap and eectrica diconnect witch hep prevent theft or vandaim. Fue-effcient EPA Fina Tier 4 (FT4) emiion-certifed diee run 500 hour between oi change. Hydrauic vave ifter and erpentine bet require itte maintenance. Eay-ift hood and tranvere-mounted engine provide convenient ground-eve acce to daiy checkpoint. Remote ube bank put rear axe zerk within eay reach. Convenient maintenance chart hep enure that nothing get overooked. 1. Hydrauicay driven fan run ony a needed for effcient cooing, reduced noie, and ower fue conumption Eay-acce fue pane accommodate quick check and change Eectronic contro unit et ervice technician eaiy retrieve vita operating information and hep diagnoe probem more quicky

13 4. Hydrauic fuid ight gauge and ee-through cooant reervoir et you check fuid eve at a gance Eay-acce pin-on fter and environmenta drain make fuid change quick and cean Nobody back you better than the 1,200-pu John Deere CWP deaer throughout North America. 6

14 244K Engine Manufacturer and Mode Non-Road Emiion Standard Cyinder Vave per Cyinder Dipacement Net Peak Power at 2,400 rpm (SAE J1349 / ISO 9249) Gro Rated Power at 2,400 rpm (ISO 14396) Peak Torque at 1,560 rpm Engine Bore and Stroke Lubrication Apiration Air Ceaner Cooing Fan Engine Cooant Rating Engine Radiator Hydrauic Cooer Powertrain Type 2 Trave Speed in Forward and Revere (equipped with 365/70R18 tire) Gear 1 Gear 2 Axe Rear Axe Ociation Veru Front Axe Differentia Maximum Rie and Fa, Singe Whee Steering Steering Whee Turn, Stop to Stop Articuation Ange Fina Drive Brake (SAE J1473 / ISO 3450) Service Brake Parking Brake Hydrauic Main Pump (oader and teering) Standard Tota with High-Fow Option Maximum Preure at Couping Sytem Reief Preure Loader Steering Hydrauic Cyce Time Raie Dump Lower Tota 244K Yanmar 4TNV98C EPA Fina Tier L (203 cu. in.) 48 kw (64 hp) 50 kw (67 hp) 235 Nm (173 b.-ft.) 98 x 110 mm (3.89 x 4.33 in.) Preure ytem with fu-fow pin-on fter Naturay apirated Dua afety eement dry type Hydrauicay driven, proportionay controed 37 deg. C ( 34 deg. F) 10 fn per in., water to air 10 fn per in., oi to air Hydrotatic (HST) with infinitey variabe peed contro over fu range of operating peed; 2 peed range; joytick-mounted F-N-R; acceeration peda; HST inching peda, which aow infinitey reduced trave peed whie maintaining fu engine rpm and hydrauic fow 6.92 km/h (4.3 mph) km/h (18.6 mph) Rear center-pivot axe with 10-deg. rear axe ociation and 10-deg. frame ociation 20 deg. tota, top to top Manua (puh button) 100% ocking front, conventiona rear 254 mm (10 in.) Hydrauic power teering (SAE J1511); 30-deg. articuation eft and right with mechanica-actuated rearwhee-teer teering; 26-deg. rear-whee teering tied mechanicay to articuation; equivaent of 97-deg. conventiona teering ytem articuation 4¼ (2 eft / 2¼ right) 60-deg. arc (30 deg. each direction) Heavy-duty outboard panetary Hydrauicay actuated, ef-adjuting interna wet-dic brake and driveine drum brake Automaticay pring-appied, hydrauicay reeaed, interna wet dic Fixed-dipacement gear pump; open-center ytem 67 L/m (17 gpm) 109 L/m (28 gpm) kpa (3,335 pi) kpa (3,335 pi) kpa (2,611 pi) 4.2 ec. 1.5 ec. 3.0 ec. 8.7 ec

15 Hydrauic (continued) Maximum Lift Capacity Lift at Ground Leve Lift at Maximum Height Turning Radiu Meaured to Centerine of Outide Tire Contro Cyinder Type 244K With 0.8-m3 (1.0 cu. yd.) tockpiing/genera-purpoe bucket with bot-on cutting edge 4491 kg (9,892 b.) 2909 kg (6,407 b.) 3.51 m (11 ft. 6 in.) Piot-operated, 3-function vave with inge-ever contro for boom and bucket, and auxiiary eve for tandard pin diconnect and auxiiary hydrauic, with contro-ever ockout feature; optiona additiona 4-function vave with puh-button contro Heat-treated, chrome-pated, poihed cyinder rod, hardened tee (repaceabe buhing) pivot pin Bore Rod Diameter Stroke 80 mm (3.2 in.) 40 mm (1.6 in.) 510 mm (20.1 in.) 80 mm (3.2 in.) 40 mm (1.6 in.) 450 mm (17.7 in.) Boom Bucket Eectrica Type Eectrica oad center with bade-type muti-fued circuit Votage 12 vot Number of Batterie 1 Battery Capacity 925 CCA Aternator Rating 80 amp Light (SAE 99) Driving/front working ight (2), turn igna, faher, and top- and taiight Tire/Whee Tire on Singe-Piece Rim Tread Width Width Over Tire Change In Vertica Height 365/70R18 (tandard) 1485 mm (58.5 in.) 1890 mm (74.0 in.) 0 mm (0 in.) 400/70R20 (optiona) 1525 mm (60.0 in.) 1930 mm (76.0 in.) 43 mm (1.7 in.) 405/70R18 (optiona) 1525 mm (60.0 in.) 1930 mm (76.0 in.) 22 mm (1.0 in.) Serviceabiity Ref Capacitie Cooing Sytem (engine and radiator) 11 L (11.6 qt.) Differentia and Panetary Axe Front 4 L (4.3 qt.) Rear 4 L (4.3 qt.) Engine Oi with Fiter 10 L (10.8 qt.) Fue Tank 80 L (21.1 ga.) Hydrauic/Hydrotatic (HST) Reervoir with Fiter 55 L (14.5 ga.) HST Motor Gearbox 0.7 L (0.8 qt.) Front/Rear Axe Panetary Hub (each) 0.9 L (1.0 qt.) Operating Weight With tandard equipment, 365/70R18 tire, tandard counterweight, cab, 79-kg (175 b.) operator, and fu fue tank With Quick-Couper and 0.8-m3 (1.0 cu. yd.) Stockpiing/ 5470 kg (12,060 b.) Genera-Purpoe Bucket with Bot-On Cutting Edge With Quick-Couper and 1.1-m3 (1.4 cu. yd.) Stockpiing/ 5590 kg (12,325 b.) Genera-Purpoe Bucket with Bot-On Cutting Edge With Quick-Couper and Fork 5400 kg (11,906 b.) Optiona Component Bucket, Stockpiing/Genera Purpoe, with Bot-On Cutting Edge 0.8 m3 (1.0 cu. yd.) 334 kg (736 b.) 1.1 m3 (1.4 cu. yd.) 429 kg (946 b.)

16 Dimenion and Specifcation with Quick-Couper and Bucket 244K L M H G A B I F N C D E J Dimenion with Quick-Couper and Bucket A Height to Top of Cab B Height to Top of Exhaut C Ground Cearance D Length from Centerine to Front Axe E Wheebae F Dump Cearance, 42-deg. Fu Height G Height to Hinge Pin, Fuy Raied H Reach, 42-deg. Dump, Fu Height I Reach, 42-deg. Dump, 2.13-m (7 ft.) Cearance J Maximum Digging Depth K Overa Length, Bucket on Ground L Maximum Roback at Fu Height M Bucket Dump at Fu Height N Maximum Roback at Ground Leve Specifcation with Quick-Couper and Bucket Capacity, Heaped (SAE) Capacity, Struck (SAE) Bucket Width Breakout Force (SAE J732C) Tipping Load, Straight Tipping Load, Fu Turn (SAE) Rated Operating Load, 50% of Fu-Turn Tipping Load (conform to ISO )* Loader Cearance Circe, Bucket Carry Poition *Rated operating capacity baed on Deere attachment ony. K 0.8-m3 (1.0 cu. yd.) tockpiing/genera purpoe with bot-on cutting edge 2.72 m (8 ft. 11 in.) 2.59 m (8 ft. 6 in.) mm (11.6 in.) mm (29.5 in.) 2.15 m (7 ft. 1 in.) 2.55 m (8 ft. 4 in.) 3.20 m (10 ft. 6 in.) mm (32.2 in.) 1.17 m (3 ft. 10 in.) mm (3.1 in.) 5.28 m (17 ft. 4 in.) 52 deg. 42 deg. 39 deg. 1.1-m3 (1.4 cu. yd.) tockpiing/genera purpoe with bot-on cutting edge 2.72 m (8 ft. 11 in.) 2.59 m (8 ft. 6 in.) mm (11.6 in.) mm (29.5 in.) 2.15 m (7 ft. 1 in.) 2.51 m (8 ft. 3 in.) 3.20 m (10 ft. 6 in.) mm (34 in.) 1.19 m (3 ft. 11 in.) mm (3.1 in.) 5.23 m (17 ft. 2 in.) 52 deg. 42 deg. 39 deg. 0.8 m3 (1.0 cu. yd.) 0.66 m3 (0.86 cu. yd.) 1.90 m (6 ft. 3 in.) 4895 kg (10,792 b.) 4065 kg (8,962 b.) 3712 kg (8,183 b.) 1856 kg (4,092 b.) 1.1 m3 (1.4 cu. yd.) 0.90 m3 (1.18 cu. yd.) 2.20 m (7 ft. 3 in.) 4410 kg (9,722 b.) 4042 kg (8,912 b.) 3690 kg (8,137 b.) 1845 kg (4,069 b.) 7.38 m (24 ft. 3 in.) 7.57 m (24 ft. 10 in.) 16 17

17 Dimenion and Specifcation with Quick-Couper and Fork 244K H G J O I A B L K C D N M E F Dimenion with Quick-Couper and Fork A Height to Top of Cab B Height to Top of Exhaut C Ground Cearance D Length from Centerine to Front Axe E Wheebae F Overa Length, Fork on Ground G Height to Hinge Pin, Fuy Raied H Reach, Fuy Raied I Fork Height, Fuy Raied J Maximum Reach, Fork Leve K Fork Height, Maximum Reach L Reach, Ground Leve M Depth Beow Ground N Tine Length O Load Poition, 50% Tine Length Specifcation with Fork Tipping Load, Straight Tipping Load, Fu Turn Rated Operating Load, 50% Fu-Turn Tipping Load (conform to SAE J1197 / ISO )* Rated Operating Load, Rough Terrain, 60% Fu-Turn Tipping Load (conform to EN474-3)* Rated Operating Load, Firm and Leve Ground, 80% Fu-Turn Tipping Load (conform to EN474-3)* *Rated operating capacity baed on Deere attachment ony. Bucket Seection Guide* 1.20-m (47.2 in.) tine ength 2.72 m (8 ft. 11 in.) 2.59 m (8 ft. 6 in.) mm (11.6 in.) mm (29.5 in.) 2.15 m (7 ft. 1 in.) 5.79 m (19 ft. 0 in.) 3.20 m (10 ft. 6 in.) mm (21.7 in.) 3.04 m (10 ft. 0 in.) 1.26 m (4 ft. 2 in.) 1.45 m (4 ft. 9 in.) mm (29 in.) mm (2 in.) 1.20 m (47.2 in.) 600 mm (23.6 in.) A meaured with fork eve, centered on tine 3145 kg (6,933 b.) 2652 kg (5,846 b.) 1326 kg (2,923 b.) 1660 kg (3,660 b.) 2212 kg (4,786 b.) 2.3 (3.0) LOOSE MATERIALS Chip, pupwood Cinder (coa, ahe, cinker) Cay and grave, dry Cay, compact, oid Cay, dry in ump ooe Cay, excavated in water Coa, anthracite, broken, ooe Coa, bituminou, moderatey wet Earth, common oam, dry Earth, mud, packed Granite, broken Gypum Limetone, coare, ized Limetone, mixed ize Limetone, puverized or cruhed Sand, damp Sand, dry Sand, void, fu of water Sandtone, quarried Shae, broken cruhed Sag, furnace granuated Stone or grave, 37.5 to 87.5-mm (1.5 to 3.5") ize Stone or grave, mm (3/4") ize BUCKET SIZE m3 (cu. yd.) 1.9 (2.5) 1.5 (2.0) Co 1.0 (1.5) n er va tiv e Ma No xim rm um a Loa Loa Lo d d ad Deere 1.1-m3 (1.4 cu. yd.) Genera-Purpoe Bucket Deere 0.8-m3 (1.0 cu. yd.) Genera-Purpoe Bucket 0.8 (1.0) b./cu.yd. kg/m3 1,000 1, , , , , , , kg/m3 b./cu. yd ,134 2,700 2,943 1,701 2,160 1,458 1,350 2,052 3,105 2,592 3,834 2,646 2,835 2,295 3,510 2,970 3,510 2,214 2,295 3, ,430 2,700 * Thi guide, repreenting bucket ize not neceariy manufactured by Deere, wi hep you in eecting proper bucket ize for materia denity, oader configuration, and operating condition. Optimum bucket ize i determined after adding or ubtracting a tipping oad change due to optiona equipment. The conervative oad ine on thi guide i recommended when operating in condition uch a oft ground and uneve urface. The maximum oad condition on thi guide i ometime utiized when operating on firm ground and eve urface.

18 324K Engine Manufacturer and Mode Non-Road Emiion Standard Cyinder Vave per Cyinder Dipacement Net Peak Power at 2,400 rpm (SAE J1349 / ISO 9249) Gro Rated Power at 2,400 rpm (ISO 14396) Peak Torque at 1,560 rpm Engine Bore and Stroke Lubrication Apiration Air Ceaner Cooing Fan Engine Cooant Rating Engine Radiator Hydrauic Cooer Powertrain Type 2 Trave Speed in Forward and Revere (equipped with 405/70R20 tire) Gear 1 Gear 2 Axe Rear Axe Ociation Veru Front Axe Differentia Maximum Rie and Fa, Singe Whee Steering Steering Whee Turn, Stop to Stop Articuation Ange Fina Drive Brake (SAE J1473 / ISO 3450) Service Brake Parking Brake Hydrauic Main Pump (oader and teering) Standard Tota with High-Fow Option Maximum Preure at Couping Sytem Reief Preure Loader Steering Hydrauic Cyce Time Raie Dump Lower Tota 324K Yanmar 4TNV98CT EPA Fina Tier L (203 cu. in.) 52 kw (70 hp) 54 kw (72 hp) 279 Nm (206 b.-ft.) 98 x 110 mm (3.89 x 4.33 in.) Preure ytem with fu-fow pin-on fter Turbocharged Dua afety eement dry type Hydrauicay driven, proportionay controed 37 deg. C ( 34 deg. F) 10 fn per in., water to air 10 fn per in., oi to air Hydrotatic (HST) with infinitey variabe peed contro over fu range of operating peed; 2 peed range; joytick-mounted F-N-R; acceeration peda; HST inching peda, which aow infinitey reduced trave peed whie maintaining fu engine rpm and hydrauic fow 6.9 km/h (4.3 mph) 28.0 km/h (17.4 mph) Rear center-pivot axe with 10-deg. rear axe ociation and 10-deg. frame ociation 20 deg. tota, top to top Manua (puh button) 100% ocking front, conventiona rear 290 mm (11 in.) Hydrauic power teering (SAE J1511); 30-deg. articuation eft and right with mechanica-actuated rearwhee-teer teering; 26-deg. rear-whee teering tied mechanicay to articuation; equivaent of 97-deg. conventiona teering ytem articuation 4¼ (2 eft / 2¼ right) 60-deg. arc (30 deg. each direction) Heavy-duty outboard panetary Hydrauicay actuated, ef-adjuting interna wet-dic brake and driveine drum brake Automaticay pring-appied, hydrauicay reeaed, interna wet dic Fixed-dipacement gear pump; open-center ytem 93 L/m (24 gpm) 132 L/m (34 gpm) kpa (3,045 pi) kpa (2,750 pi) kpa (2,611 pi) 5.5 ec. 1.9 ec. 4.2 ec ec

19 Hydrauic (continued) Maximum Lift Capacity Lift at Ground Leve Lift at Maximum Height Turning Radiu Meaured to Centerine of Outide Tire Contro Cyinder Type 324K With 1.1-m3 (1.4 cu. yd.) tockpiing/genera-purpoe bucket with bot-on cutting edge 5510 kg (12,136 b.) 3572 kg (7,868 b.) 3.78 m (12 ft. 5 in.) Piot-operated, 3-function vave with inge-ever contro for boom and bucket, and auxiiary eve for tandard pin diconnect and auxiiary hydrauic, with contro-ever ockout feature; optiona additiona 4-function vave with puh-button contro Heat-treated, chrome-pated, poihed cyinder rod, hardened tee (repaceabe buhing) pivot pin Bore Rod Diameter Stroke 100 mm (3.9 in.) 50 mm (2.0 in.) 510 mm (20.0 in.) 100 mm (3.9 in.) 50 mm (2.0 in.) 450 mm (17.7 in.) Boom Bucket Eectrica Type Eectrica oad center with bade-type muti-fued circuit Votage 12 vot Number of Batterie 1 Battery Capacity 925 CCA Aternator Rating 80 amp Light (SAE 99) Driving/front working ight (2), turn igna, faher, and top- and taiight Tire/Whee Tire on Singe-Piece Rim Tread Width Width Over Tire Change In Vertica Height 405/70R20 (tandard) 1745 mm (69 in.) 2160 mm (85 in.) 0 mm (0 in.) 405/70R18 (optiona) 1660 mm (65 in.) 2060 mm (81 in.) 25 mm ( 1 in.) 400/70R20 (optiona) 1645 mm (64 in.) 2060 mm (81 in.) 20 mm ( 0.8 in.) Serviceabiity Ref Capacitie Cooing Sytem (engine and radiator) 12 L (12.7 qt.) Differentia and Panetary Axe Front 7.3 L (7.7 qt.) Rear 6.7 L (7.1 qt.) Engine Oi with Fiter 10 L (10.8 qt.) Fue Tank 81 L (21.5 ga.) Hydrauic/Hydrotatic (HST) Reervoir with Fiter 80 L (21.1 ga.) HST Motor Gearbox 0.8 L (0.8 qt.) Front/Rear Axe Panetary Hub (each) 0.9 L (0.9 qt.) Operating Weight With tandard equipment, 405/70R20 tire, tandard counterweight, cab, 79-kg (175 b.) operator, and fu fue tank With Quick-Couper and 1.1-m3 (1.4 cu. yd.) Stockpiing/ 6390 kg (14,087 b.) Genera-Purpoe Bucket with Bot-On Cutting Edge With Quick-Couper and 1.6-m3 (2.0 cu. yd.) Light-Materia 6316 kg (13,925 b.) Bucket with Bot-On Cutting Edge With Quick-Couper and Fork 6233 kg (13,741 b.) Optiona Component Bucket, 1.1-m3 (1.4 cu. yd.), Stockpiing/Genera Purpoe 429 kg (946 b.) with Bot-On Cutting Edge Bucket, 1.6-m3 (2.0 cu. yd.), Light Materia with Bot-On 512 kg (1,129 b.) Cutting Edge

20 Dimenion and Specifcation with Quick-Couper and Bucket 324K L M H G A B I F N C D E J Dimenion with Quick-Couper and Bucket A Height to Top of Cab B Height to Top of Exhaut C Ground Cearance D Length from Centerine to Front Axe E Wheebae F Dump Cearance, 42-deg. Fu Height G Height to Hinge Pin, Fuy Raied H Reach, 42-deg. Dump, Fu Height I Reach, 42-deg. Dump, 2.13-m (7 ft.) Cearance J Maximum Digging Depth K Overa Length, Bucket on Ground L Maximum Roback at Fu Height M Bucket Dump at Fu Height N Maximum Roback at Ground Leve Specifcation with Quick-Couper and Bucket Capacity, Heaped (SAE) Capacity, Struck (SAE) Bucket Width Breakout Force (SAE J732C) Tipping Load, Straight Tipping Load, Fu Turn (SAE) Rated Operating Load, 50% of Fu-Turn Tipping Load (conform to ISO )* Loader Cearance Circe, Bucket Carry Poition *Rated operating capacity baed on Deere attachment ony. K 1.1-m3 (1.4 cu. yd.) tockpiing/genera purpoe with bot-on cutting edge 2.79 m (9 ft. 2 in.) 2.67 m (8 ft. 9 in.) 386 mm (15.2 in.) 749 mm (29.5 in.) 2.30 m (7 ft. 7 in.) 2.67 m (8 ft. 9 in.) 3.35 m (11 ft. 0 in.) 884 mm (34.8 in.) 1.30 m (4 ft. 3 in.) 69 mm (2.7 in.) 5.76 m (18 ft. 11 in.) 56 deg. 42 deg. 40 deg. 1.6-m3 (2.0 cu. yd.) ight materia with bot-on cutting edge 2.79 m (9 ft. 2 in.) 2.67 m (8 ft. 9 in.) 386 mm (15.2 in.) 749 mm (29.5 in.) 2.30 m (7 ft. 7 in.) 2.55 m (8 ft. 4 in.) 3.35 m (11 ft. 0 in.) 937 mm (3 ft. 1 in.) 1.30 m (4 ft. 3 in.) 69 mm (2.7 in.) 5.74 m (18 ft. 10 in.) 56 deg. 42 deg. 40 deg. 1.1 m3 (1.4 cu. yd.) 0.9 m3 (1.2 cu. yd.) 2.20 m (7 ft. 3 in.) 5608 kg (12,364 b.) 4850 kg (10,692 b.) 4430 kg (9,766 b.) 2215 kg (4,883 b.) 1.6 m3 (2.0 cu. yd.) 1.4 m3 (1.8 cu. yd.) 2.40 m (7 ft. 10 in.) 4938 kg (10,887 b.) 4746 kg (10,463 b.) 4317 kg (9,517 b.) 2159 kg (4,759 b.) 8.30 m (27 ft. 3 in.) 8.27 m (27 ft. 1 in.) 20 21

21 Dimenion and Specifcation with Quick-Couper and Fork 324K H G J O I A B L K C D N M E F Dimenion with Quick-Couper and Fork 1.20-m (47.2 in.) tine ength A Height to Top of Cab 2.79 m (9 ft. 2 in.) B Height to Top of Exhaut 2.67 m (8 ft. 9 in.) C Ground Cearance 386 mm (15.2 in.) D Length from Centerine to Front Axe 749 mm (29.5 in.) E Wheebae 2.30 m (7 ft. 7 in.) F Overa Length, Fork on Ground 6.14 m (20 ft. 2 in.) G Height to Hinge Pin, Fuy Raied 3.35 m (11 ft. 0 in.) H Reach, Fuy Raied 569 mm (22.4 in.) I Fork Height, Fuy Raied 3.19 m (10 ft. 6 in.) J Maximum Reach, Fork Leve 1.52 m (5 ft. 0 in.) K Fork Height, Maximum Reach 1.36 m (4 ft. 6 in.) L Reach, Ground Leve 749 mm (29.5 in.) M Depth Beow Ground 36 mm (1.4 in.) N Tine Length 1.20 m (47.2 in.) O Load Poition, 50% Tine Length 600 mm (23.6 in.) Specifcation with Fork A meaured with fork eve, centered on tine Tipping Load, Straight 3573 kg (7,877 b.) Tipping Load, Fu Turn 3250 kg (7,165 b.) Rated Operating Load, 50% Fu-Turn Tipping Load (conform 1625 kg (3,582 b.) to SAE J1197 / ISO )* Rated Operating Load, Rough Terrain, 60% Fu-Turn Tipping 2040 kg (4,497 b.) Load (conform to EN474-3)* Rated Operating Load, Firm and Leve Ground, 80% Fu-Turn 2500 kg (5,511 b.) Tipping Load (conform to EN474-3)* *Rated operating capacity baed on Deere attachment ony. Payoad on fork i imited by tit cyinder 2,500-kg (5,511 b.) maximum oad capacity for the fork carrier. Bucket Seection Guide* 2.3 (3.0) LOOSE MATERIALS Chip, pupwood Cinder (coa, ahe, cinker) Cay and grave, dry Cay, compact, oid Cay, dry in ump ooe Cay, excavated in water Coa, anthracite, broken, ooe Coa, bituminou, moderatey wet Earth, common oam, dry Earth, mud, packed Granite, broken Gypum Limetone, coare, ized Limetone, mixed ize Limetone, puverized or cruhed Sand, damp Sand, dry Sand, void, fu of water Sandtone, quarried Shae, broken cruhed Sag, furnace granuated Stone or grave, 37.5 to 87.5-mm (1.5 to 3.5") ize Stone or grave, mm (3/4") ize BUCKET SIZE m3 (cu. yd.) 1.9 (2.5) 1.5 (2.0) Deere 1.6-m3 (2.0 cu. yd.) Light-Materia Bucket 1.0 (1.5) Co n er v ati ve Ma No xim rm um a L Loa oad d L oa d Deere 1.1-m3 (1.4 cu. yd.) Genera-Purpoe Bucket 0.8 (1.0) b./cu.yd. kg/m3 1,000 1, , , , , , , kg/m3 b./cu. yd ,134 2,700 2,943 1,701 2,160 1,458 1,350 2,052 3,105 2,592 3,834 2,646 2,835 2,295 3,510 2,970 3,510 2,214 2,295 3, ,430 2,700 * Thi guide, repreenting bucket ize not neceariy manufactured by Deere, wi hep you in eecting proper bucket ize for materia denity, oader configuration, and operating condition. Optimum bucket ize i determined after adding or ubtracting a tipping oad change due to optiona equipment. The conervative oad ine on thi guide i recommended when operating in condition uch a oft ground and uneve urface. The maximum oad condition on thi guide i ometime utiized when operating on firm ground and eve urface.

22 Additiona equipment Key: Standard Optiona or pecia 244K 324K Engine Meet EPA Fina Tier 4 Antifreeze, 37 deg. C ( 34 deg. F) Cooant recovery tank Fan afety guard Fan, uction type, hydrauicay driven, proportiona peed Exhaut aftertreatment, under hood, with curved end exhaut tack Environmentay friendy engine oi drain Spin-on engine oi and fue fter Engine oi cooer Quick-reeae fue fter and water eparator Under-hood dua-eement air ceaner with retriction indicator with dutevacuator vave Above-hood precreened air intake Engine cooant heater, 400 watt, 110 vot Specia appication: Trah creen, etc.* Eectrica Starter witch with eectric fue cutoff 12-vot ytem Eectrica oad center with bade-type fue Standard 925-CCA battery Mater eectrica diconnect witch Aternator, 80 amp Horn (conform to SAE J994 and J1446) Light (conform to SAE 99): Driving / Front working (2) / Turn igna / Faher / Stop / Taiight Rear work ight Revere warning aarm (conform to SAE J994 and J1446) Mutifunction monitor with audibe and viua warning: Low engine oi preure / Engine cooant temperature / Hydrotatic (HST) tranmiion oi temperature / Parking brake indicator / Gauge and indicator: Engine cooant temperature, fue eve, peedometer, and hour meter Indicator ight: Engine air fter / Faten eat bet / Parking brake actuated / Forward/revere trave / 1t- or 2nd-peed range / Turn igna and hazard ight / High-beam indicator / Battery votage Radio-ready cab, fued 12-vot radio eectrica ead and peaker, power port Pre-wired for roof beacon Seaed externa eectrica connector 244K 324K Powertrain/Brake HST tranmiion: Eectric hift contro / Singe-ever joytick F-N-R / HST oi cooer / Inching peda / 2 peed forward and revere / Infnitey variabe peed contro Service brake, hydrauicay actuated, ef-adjuting interna wet-dic brake and driveine drum brake Parking brake, pring appied, hydrau icay reeaed, witch operated Axe, manua ocking front and conven tiona rear differentia, heavy-duty outboard panetarie Hydrauic Sytem Hydrauic ytem oi cooer Automatic bucket return-to-dig contro Boom-foat function Reervoir ight gauge for hydrauic/ HST oi 10-micron hydrauic fter, vertica mounting Hydrauic piot circuit ockout Piot-operated 3-function vave with inge joytick ever contro for boom and bucket, and auxiiary ever for tandard pin diconnect and auxiiary hydrauic 109-L/m (28 gpm) high-fow option 132-L/m (34 gpm) high-fow option 4-function hydrauic vave with piot joytick contro and piot auxiiary ever for 3rd function, and puh button for 4th function Quick-couper diagnotic port: Priority preure / Hydrauic pump preure / Contro vave preure / HST preure Operator Station Cab (conform to SAE J1040, SAE J231, ISO 3471, and ISO 3449): ROPS/FOPS / Heater/defroter / Rubber-pane ioation mounted for noie/vibration reduction / Intermittent front and rear windhied wiper and waher / Tinted afety ga / Fu-width adjutabe un vior / Pre-wired for radio peaker / Deuxe coth eat with mechanica upenion and 51-mm (2 in.) retractabe eat bet / Left and right door *See your John Deere deaer for further information. 244K 324K Operator Station (continued) AM/FM/weather-band radio AM/FM/weather-band radio with caette payer AM/FM/weather-band radio with CD payer Air conditioning Storage compartment Rubber foor mat Tit teering coumn Rearview mirror, outide (2) and inide (1) (conform to SAE J985) Handhod and tep, ergonomicay ocated and ip reitant (conform to SAE J185) 76-mm (3 in.) retractabe eat bet Loader Linkage Z-bar oader inkage Loader boom ervice ocking bar (conform to SAE J38) Bucket and Attachment Fu ine of bucket with eection of bot-on cutting edge ISO quick-couper Quik-Tatch pin-on couper Paet fork Workite Pro kid-teer-tye couper Fu ine of contruction utiity fork, paet fork, extendabe boom with hook, and other attachment* Tire 365/70R18 on inge-piece rim 400/70R20 on inge-piece rim 405/70R18 on inge-piece rim 405/70R20 on inge-piece rim Other Fender, front and rear Articuation ocking bar (conform to SAE J276) Vanda protection, incude ockabe engine encoure and fue f Counterweight, fu Rear bottom guard Drawbar, with ocking pin Materia-weighing ytem* Ride contro JDLink wiree communication ytem (avaiabe in pecifc countrie)* Net engine power i with tandard equipment incuding air ceaner, exhaut ytem, aternator, and cooing fan, at tandard condition per SAE J1349 and DIN , uing No. 2-D fue at 35 API gravity. No derating i required up to 1500-m (5,000 ft.) atitude. Gro power i without cooing fan. Specification and deign ubject to change without notice. Wherever appicabe, pecification are in accordance with SAE tandard. Except where otherwie noted, thee pecification are baed on a unit with a tandard equipment, ROPS cab, fu fue tank, and 79-kg (175 b.) operator; a 244K unit with 365/70R18 tire; and a 324K unit with 405/70R20 tire. JohnDeere.com DKAK Litho in U.S.A. (15-08) Powered by TCPDF (