ZAXIS 270LC-3 Engine Net Peak Power: 188 hp (140 2,100 rpm Operating Weight: 63,425 lb. ( kg) Backhoe Bucket: 1.74 cu. yd. (1.
|
|
|
- Shavonne Bryant
- 6 years ago
- Views:
Transcription
1 ZAXIS 270LC-3 Engine Net Peak Power: 188 hp (140 2,100 rpm Operating Weight: 63,425 lb. ( kg) Backhoe Bucket: 1.74 cu. yd. (1.34 m 3 ), 42 in. (1065 mm)
2 ZAXIS 270LC-3 SPECIFICATIONS Engine Model...Isuzu AH-4HK1XYSA-03 certified to EPA Tier-3 emissions Type...4-cycle water-cooled, direct injection Aspiration...turbocharged, intercooled No. of Cylinders...4 Net Peak Power (ISO9249)...H/P mode: 188 hp (140 kw) at 2,100 rpm (min -1 ) Piston Displacement cu. in. (5.193 L) Bore and Stroke in. x 4.9 in. (115 mm x 125 mm) Electrical System...24 volt with 50-amp alternator Hydraulic System Main Pumps...two variable-displacement axial-piston Maximum Flow...2 x 62.3 gpm (2 x 236 L/min.) Pilot Pump...one gear Maximum Flow gpm (34 L/min.) Pressure Setting psi (4000 kpa) System Operating Pressure Implement Circuits...4,980 psi ( kpa) Travel Circuits...4,980 psi ( kpa) Swing Circuits...4,700 psi ( kpa) Power Boost...5,260 psi ( kpa) Oil Filtration...one 10-micron full-flow return filter with by-pass / one pilot oil filter Cylinders Bore Rod Diameter Stroke Boom (2) in. (135 mm) 3.7 in. (95 mm) 53.5 in. (1360 mm) Arm (1) in. (150 mm) 4.1 in. (105 mm) 65.3 in. (1659 mm) Bucket (1) in. (135 mm) 3.5 in. (90 mm) 42.1 in. (1070 mm) Swing Mechanism Swing Speed rpm Swing Torque...56,852 lb.-ft. ( Nm) Undercarriage Carrier Rollers (per side)...2 Track Rollers (per side)...8 Shoes, Triple Semi-Grouser (per side)...49 Track Guides...front and center Track Adjustment...hydraulic Travel Speed Low mph (0 3.3 km/h) High mph (0 5.5 km/h) Drawbar Pull...56,074 lb. ( kg) Ground Pressure Data Average Ground Pressure 32-in. (800 mm) Triple Semi-Grouser Shoes (recommended for general/soft terrain) psi (40.3 kpa) SAE Operating Weights With Full Fuel Tank; 175-lb. (79 kg) Operator; 1.75-cu.-yd. (1.34 m 3 ), 42-in. (1065 mm), 2,279-lb. (1034 kg) Bucket; 12-ft. 4-in. (3.75 m) Arm; 13,447-lb. (6100 kg) Counterweight; and 32-in. (800 mm) Triple Semi-Grouser Shoes...63,425 lb. ( kg)
3 Capacities (U.S.) Fuel Tank gal. (500 L) Cooling System qt. (26 L) Engine Lubrication, Including Filter qt. (23 L) Hydraulic Tank...39 gal. (148 L) Hydraulic System gal. (240 L) Propel Gearbox (each)...9 qt. (8.5 L) Swing Drive...8 qt. (7.6 L) Component Weights Undercarriage 32-in. (800 mm) Triple Semi-Grouser Shoes...25,937 lb. ( kg) One-Piece Boom (with arm cylinder)...5,086 lb. (2307 kg) Arm with Bucket Cylinder and Linkage 10 ft. 2 in. (3.11 m)...3,102 lb. (1407 kg) 12 ft. 4 in. (3.75 m)...3,298 lb. (1496 kg) Boom Lift Cylinders (2) Total Weight...1,098 lb. (494 kg) 1.75-cu.-yd. (1.34 m 3 ), 42-in. (1065 mm) Heavy-Duty High-Capacity Bucket...2,279 lb. (1034 kg) Counterweight...13,447 lb. (6100 kg) Lifting Capacities Boldface italic type indicates hydraulic-limited capacities; lightface type indicates stability-limited capacities, in lb. (kg). Ratings at bucket lift hook; machine equipped with 1.75-cu.-yd. (1.34 m 3 ), 42-in. (1065 mm), 2,279-lb. (1034 kg) bucket; 13,447-lb. (6100 kg) counterweight; standard gauge; and situated on firm, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do not exceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine. All lift capacities are based on SAE J1097. Load Point 10 ft. (3.05 m) 15 ft. (4.57 m) 20 ft. (6.10 m) 25 ft. (7.62 m) 30 ft. (9.15 m) Height Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side With 12-ft. 4-in. (3.75 m) arm and 32-in. (800 mm) triple semi-grouser shoes 25 ft. (7.62 m) 8,490 (3851) 8,490 (3851) 20 ft. (6.10 m) 8,629 (3914) 8,629 (3914) 5,984 (2714) 5,984 (2714) 15 ft. (4.57 m) 9,676 (4389) 9,676 (4389) 9,609 (4359) 7,937 (3600) 10 ft. (3.05 m) 17,039 (7729) 17,039 (7729) 13,189 (5982) 13,189 (5982) 11,405 (5173) 10,668 (4839) 10,524 (4774) 7,680 (3484) 5 ft. (1.52 m) 24,377 (11 057) 22,290 (10 111) 16,795 (7618) 14,398 (6531) 13,401 (6079) 10,091 (4577) 11,626 (5274) 7,371 (3343) Ground Line 28,866 (13 094) 20,936 (9497) 19,727 (8948) 13,562 (6152) 15,195 (6892) 9,601 (4355) 12,245 (5554) 7,096 (3219) 5 ft. ( 1.52 m) 15,885 (7205) 15,885 (7205) 30,355 (13 769) 20,481 (9290) 21,412 (9712) 13,102 (5943) 16,083 (7295) 9,284 (4211) 12,055 (5468) 6,922 (3140) 10 ft. ( 3.05 m) 22,504 (10 208) 22,504 (10 208) 29,877 (13 552) 20,489 (9294) 21,738 (9860) 12,972 (5884) 15,965 (7242) 9,178 (4163) 10,392 (4714) 6,920 (3139) 15 ft. ( 4.57 m) 30,876 (14 005) 30,876 (14 005) 27,577 (12 509) 20,821 (9444) 20,489 (9294) 13,131 (5956) 15,518 (7039) 9,328 (4231) 20 ft. ( 6.10 m) 30,941 (14 035) 30,941 (14 035) 22,517 (10 214) 21,537 (9769) 16,452 (7463) 13,673 (6202) With 10-ft. 2-in. (3.11 m) arm and 32-in. (800 mm) triple semi-grouser shoes 20 ft. (6.10 m) 10,107 (4585) 10,107 (4585) 15 ft. (4.57 m) 11,760 (5334) 11,760 (5334) 10,993 (4986) 10,981 (4981) 8,349 (3787) 7,778 (3528) 10 ft. (3.05 m) 20,484 (9291) 20,484 (9291) 14,959 (6785) 14,959 (6785) 12,603 (5717) 10,494 (4760) 11,531 (5230) 7,587 (3441) 5 ft. (1.52 m) 27,306 (12 386) 21,575 (9786) 18,319 (8309) 14,121 (6405) 14,426 (6544) 9,976 (4525) 12,445 (5645) 7,332 (3326) Ground Line 28,596 (12 971) 20,733 (9404) 20,773 (9423) 13,441 (6097) 15,959 (7239) 9,564 (4338) 12,256 (5559) 7,117 (3228) 5 ft. ( 1.52 m) 14,458 (6558) 14,458 (6558) 30,272 (13 731) 20,588 (9339) 21,875 (9922) 13,133 (5957) 16,127 (7315) 9,337 (4235) 12,156 (5514) 7,026 (3187) 10 ft. ( 3.05 m) 23,292 (10 565) 23,292 (10 565) 29,066 (13 184) 20,762 (9418) 21,566 (9782) 13,130 (5956) 16,121 (7312) 9,332 (4233) 15 ft. ( 4.57 m) 29,503 (13 382) 29,503 (13 382) 25,803 (11 704) 21,225 (9628) 19,419 (8808) 13,422 (6088)
4 Buckets A full line of buckets is offered to meet a wide variety of applications. Digging forces are with power boost. Tooth selection includes either the John Deere Fanggs, Standard, Tiger, Twin Tiger, Abrasion panel, or Flare tooth, or the ESCO (Vertalok) Standard, Tiger, Twin Tiger, or Flare tooth. Replaceable cutting edges are available through Hitachi parts. Optional side cutters add 6 inches (150 mm) to bucket widths. Bucket Bucket Bucket Arm Dig Force Arm Dig Force Bucket Type Bucket Width Capacity* Weight Dig Force 10 ft. 2 in. (3.11 m) 12 ft. 4 in. (3.75 m) Tip Radius No. Teeth in. mm cu. yd. m 3 lb. kg lb. kn lb. kn lb. kn in. mm Heavy-Duty , , , , Plate Lip , , , , , , , , Heavy-Duty , , , , High Capacity , , , , , , , , , , , , , , , , Severe-Duty , , , , Plate Lip , , , , , , , , Ditching , , , , *All capacities are SAE heaped ratings and with side cutters. Bucket Selection Guide* 5.0 (3.8) 4.5 (3.4) BUCKET SIZE cu. yd. (m 3 ) 4.0 (3.0) 3.5 (2.7) 3.0 (2.3) 2.5 (1.9) 2.0 (1.5) Hitachi 12-ft. 4-in. (3.75 m) Arm Hitachi 10-ft. 2-in. (3.11 m) Arm 1.5 (1.0) 1.0 (0.8) lb./cu. yd. 1,200 1,400 1,600 1,800 2,000 2,200 2,400 2,600 2,800 3,000 3,200 3,400 3,600 kg/m Wet Peat Topsoil Coal Caliche Shale Dry Sand Dry Clay Limestone Wet Earth Wet Clay, Granite Moist Sand Wet Sand Wet Sand, Gravel *Contact your Hitachi dealer for optimum bucket and attachment selections. These recommendations are for general conditions and average use. Does not include optional equipment such as thumbs or couplers. Larger buckets may be possible when using light materials, for flat and level operations, less compacted materials, and volume loading applications such as mass excavation applications in ideal conditions. Smaller buckets are recommended for adverse conditions such as off-level applications, rocks, and uneven surfaces. Bucket capacity indicated is SAE heaped.
5 Dimensions A 10-ft. 2-in. (3.11 m) arm...10 ft. 5 in. (3.17 m) 12-ft. 4-in. (3.75 m) arm...11 ft. 0 in. (3.35 m) B 10-ft. 2-in. (3.11 m) arm...33 ft. 11 in. (10.34 m) 12-ft. 4-in. (3.75 m) arm...35 ft. 3 in. (10.74 m) ZAXIS 270LC-3 9 ft. 6 in. (2.89 m) 9 ft. 8 in. (2.94 m) 32 in. (800 mm) 10 ft. 2 in. (3.10 m) 8 ft. 6 in. (2.59 m) 11 ft. 1 in. (3.39 m) 1 ft. 8 in. (510 mm) A B 13 ft. 3 in. (4.05 m) 16 ft. 2 in. (4.94 m) 3 ft. 10 in. (1180 mm) Operating Information Arm Length Arm Length 10 ft. 2 in. (3.11 m) 12 ft. 4 in. (3.75 m) Arm Force with 32-in. (800 mm) Triple Semi-Grouser Shoes*...29,518 lb. (131.3 kn) 25,979 lb. ( kn) Bucket Digging Force with 32-in. (800 mm) Triple Semi-Grouser Shoes*...37,480 lb. (166.7 kn) 37,480 lb. (166.7 kn) Lifting Capacity Over Ground Level 20-ft. (6.1 m) Reach*...20,773 lb. (9423 kg) 19,727 lb. (8948 kg) A Maximum Reach...35 ft. 3 in. (10.74 m) 37 ft. 1 in. (11.30 m) A' Maximum Ground Level...34 ft.7 in. (10.55 m) 36 ft. 6 in. (11.12 m) B Maximum Digging Depth...23 ft. 10 in. (7.26 m) 25 ft. 11 in. (7.91 m) B' Maximum Digging 8-ft. (2.44 m) Flat Bottom...23 ft. 2 in. (7.05 m) 25 ft. 8 in. (7.72 m) C Maximum Cutting Height...32 ft. 10 in. (10.01 m) 34 ft. 4 in. (10.46 m) D Maximum Dumping Height...23 ft. 2 in. (7.07 m) 24 ft. 7 in. (7.49 m) E Minimum Swing Radius...13 ft. 7 in. (4.41 m) 12 ft. 9 in. (3.89 m) F Maximum Vertical Wall...20 ft. 1 in. (6.11 m) 23 ft. 1 in. (7.03 m) G Tail Swing Radius...9 ft. 8 in. (2.94 m) 9 ft. 8 in. (2.94 m) *Digging forces and lift capacities with power boost. C D B B' F GROUND LINE A' A E CENTERLINE OF SWING G
6
ZAXIS 240LC-3 Engine Net Power: Operating Weight: Backhoe Bucket: Vertis QCA th Street, Suite 200 East Moline, IL 61244
ZAXIS 240LC-3 Engine Net Power: 177 hp (132 kw) @ 2,000 rpm Operating Weight: 54,654 lb. (24 791 kg) Backhoe Bucket: 1.38 yd 3 (1.06 m 3 ), 42 in. (1065 mm) ZAXIS 240LC-3 SPECIFICATIONS Engine Model...Isuzu
ZAXIS 650LC-3 Engine Rated Power: Operating Weight: Backhoe Bucket:
ZAXIS 650LC-3 n Engine Rated Power: 463 SAE net hp (345 kw) @ 1,800 rpm n Operating Weight: 152,192 lb. (69 033 kg) n Backhoe Bucket: 4.04 yd 3 (3.09 m 3 ), 54 in. (1370 mm) ZAXIS 650LC-3 SPECIFICATIONS
250G LC. 142 kw (191 hp)
250G LC 142 kw (191 hp) 250G LC Engine 250G LC Base engine for use in U.S., U.S. Territories, and Canada Optional engine for use outside the U.S. and U.S. Territories Optional engine for use outside the
290G LC. 147 kw (197 hp)
290G LC 147 kw (197 hp) 290G LC Engine 290G LC Base engine for use in U.S., U.S. Territories, and Canada Optional engine for use outside the U.S. and U.S. Territories Optional engine for use outside the
ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX180LC kw (121 hp)
ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX180LC-5 90 kw (121 hp) ZX180LC-5 ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS Engine ZX180LC-5 Manufacturer and Model Isuzu 4JJ1 Non-Road Emissions Standards Certified
Hydraulic. Open center, load sensing Main Pumps. 2 variable-displacement axial-piston pumps Maximum Rated Flow 105 L/m (28 gpm) x 2 Pilot Pump
14 Engine Base engine for use in the U.S., U.S. Territories, and Canada Optional engine for use outside the U.S. and U.S. Territories Manufacturer and Model John Deere PowerTech PWX John Deere 4045H Non-Road
ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX210/210LC kw (150 hp)
ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX210/210LC-5 119 kw (150 hp) zx210/210lc-5 ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS Engine ZX210-5 / ZX210LC-5 Manufacturer and Model Isuzu 4HK1 Non-Road Emission Standards
ZAXIS DASH-5 utility-class EXCAVAtORS. ZX250lC kw (188 hp)
ZAXIS DASH-5 utility-class EXCAVAtORS ZX250lC-5 140 kw (188 hp) ZX250lC-5 ZAXIS DASH-5 utility-class EXCAVAtORS Engine ZX250LC-5 Manufacturer and Model Isuzu 4HKIZXSA-01 Non-Road Emissions Standards EPA
ZAXIS. 210/210LC-5 n 119 kw (159 hp)
n 119 kw (159 hp) EnginE Manufacturer and Model... Isuzu 4HK1 Non-Road Emission Standards... certified to IT4 / Stage IIIB emissions Net Rated Power (ISO 9249)... 119 kw (159 hp) @ 1,900 rpm Cylinders...
7. 5 M E T R I C T O N EXCAVATOR C 7 5 C
7. 5 M E T R I C T O N C EXCAVATOR Specifications Engine Type................................... Isuzu CC-4JG1 naturally aspirated direct-injection diesel; certified to EPA Tier 2 emissions Net Peak Power
ZAXIS 85USB-3 Engine Rated Power: Operating Weight: Backhoe Bucket:
ZAXIS 85USB-3 n Engine Rated Power: 54 hp (40.5 kw) @ 2,000 rpm n Operating Weight: 18,821 lb. (8537 kg) n Backhoe Bucket: 0.40 0.66 cu. yd. (0.31 0.50 m 3 ) ZAXIS 85USB-3 SPECIFICATIONS Engine Manufacturer
ZAXIS 75US-3 Engine Rated Power: Operating Weight: Backhoe Bucket:
ZAXIS 75US-3 n Engine Rated Power: 54 hp (40.5 kw) @ 2,000 rpm n Operating Weight: 17,743 lb. (8048 kg) n Backhoe Bucket: 0.40 0.66 cu. yd. (0.31 0.50 m 3 ) ZAXIS 75US-3 SPECIFICATIONS Engine Manufacturer
Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier 3, Tier 4) 6 8.3(506) 188(252) Direct Injection Turbocharged, air-to-air charge air cooler COOLING Fan Drive
330 EXCAVATOR ENGINE Engine Make/ Engine Model Emission Rating (optional) Cylinders Displacement L (cu. In) Net Power kw (Hp) @2,200 rpm Fuel System Aspiration Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier
ZAXIS PRODUCTION-CLASS EXCAVATORS DASH-6 ZX670LC-6 ZX870LC-6
PRODUCTION-CLASS EXCAVATORS ZAXIS DASH-6 ZX670LC-6 ZX870LC-6 ZX670LC-6/ZX870LC-6 ZAXIS DASH-6 PRODUCTION-CLASS EXCAVATORS PROVEN PERFORMANCE PASSED DOWN. PRODUCTIVITY-BOOSTING ADVANTAGES. At Hitachi, efficiency,
ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC kw (159 hp)
ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC-5 119 kw (159 hp) ZX245LC-5 ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS Engine ZX245LC-5 Manufacturer and Model Isuzu 4HK1 Non-Road Emissions Standard EPA
EXCAVATORS CONSTRUCTION EQUIPMENT MODEL NO. 135C 225C LC RTS. Courtesy of Machine.Market
CONSTRUCTION EQUIPMENT EXCAVATORS MODEL NO. 135C 225C LC RTS Get closer than you ever imagined... The John Deere 135C RTS Excavator has a digging depth of 19 feet, 9 inches, while the 225C LC RTS has a
ZAXIS ULTRASHORT-CLASS EXCAVATORS DASH-5 ZX75US-5 ZX85USB-5
ULTRASHORT-CLASS EXCAVATORS DASH-5 ZAXIS ZX75US-5 ZX85USB-5 ZX75US-5/ZX85USB-5 ZAXIS DASH-5 ULTRASHORT-CLASS EXCAVATORS BY NOT BUILDING EVERYTHING, WE COMPROMISE ON NOTHING. EXCAVATOR EXPERTS. Unlike other
ZAXIS ULTRASHORT-CLASS EXCAVATORS DASH-6 ZX135US-6 ZX245USLC-6. HitachiConstruction.com
ULTRASHORT-CLASS EXCAVATORS DASH-6 ZAXIS ZX135US-6 ZX245USLC-6 HitachiConstruction.com ZX135US-6/ZX245USLC-6 ZAXIS DASH-6 ULTRASHORT-CLASS EXCAVATORS EXCAVATOR DRIVEN. NEVER SIDETRACKED. EXCAVATOR EXPERTS.
Unprecedented precision and ease of operation.
REX130 EXCAVATOR Unprecedented precision and ease of operation. This Rhino excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A
ZX250LC-6 ZX300LC-6 CONSTRUCTION EXCAVATORS
CONSTRUCTION EXCAVATORS EXCAVATOR FOCUSED. NO DISTRAC Packed with productivity-boosting advantages, the and bring efficiency, reliability and durability to your jobsites with a fuel-efficient engine that
ZX250LC-6 ZX300LC-6 CONSTRUCTION EXCAVATORS
ZX250LC-6 CONSTRUCTION EXCAVATORS EXCAVATOR FOCUSED. NO DISTRAC Packed with productivity-boosting advantages, the ZX250LC-6 and bring efficiency, reliability and durability to your jobsites with a fuel-efficient
ZAXIS CONSTRUCTION-CLASS EXCAVATORS DASH-6 ZX350LC-6 ZX380LC-6
CONSTRUCTION-CLASS EXCAVATORS DASH-6 ZAXIS ZX350LC-6 ZX380LC-6 ZX350LC-6 / ZX380LC-6 ZAXIS DASH-6 CONSTRUCTION-CLASS EXCAVATORS BY NOT BUILDING EVERYTHING, WE COMPROMISE ON NOTHING. EXCAVATOR FOCUSED.
ZAXIS CONSTRUCTION-CLASS EXCAVATORS DASH-6 ZX250LC-6 ZX300LC-6
CONSTRUCTION-CLASS EXCAVATORS DASH-6 ZAXIS ZX250LC-6 ZX300LC-6 ZX250LC-6 / ZX300LC-6 ZAXIS DASH-6 CONSTRUCTION-CLASS EXCAVATORS EXCAVATOR FOCUSED. NO DISTRACTIONS. EXCAVATOR EXPERTS. At Hitachi, we don
ConStruCtIon-CLASS EXCAVAtorS ZAXIS DASH-6 ZX250LC-6 ZX300LC-6
Construction-CLASS EXCAVATORS DASH-6 ZAXIS zx250lc-6 ZX300lc-6 zx250lc-6 / zx300lc-6 ZAXIS DASH-6 construction-class EXCAVATORS excavator focused. no distractions. excavator experts. At Hitachi, we don
D EXCAVATORS 240D LC 270D LC
2 4 2 7 M E T R I C T O N S D EXCAVATORS 240D LC 270D LC Armed forces. Bigger, stronger, faster, and quieter. The new 240D LC and 270D LC are armed and ready to take on your world. Both deliver the power,
D EXCAVATORS 120D 160D LC
1 2 1 6 M E T R I C T O N D EXCAVATORS 120D 160D LC Raise your standards. Your customers expect big things from you, so why shouldn t you expect the same from your mid-size excavator? Delivering the power,
D EXCAVATORS 75D 85D
7. 5 8. 5 M E T R I C T O N D EXCAVATORS 75D 85D Regular or swing boom. Steel or rubber tracks. It s nice to have choices. Whether you re landscaping or doing light residential excavating, site development,
D EXCAVATORS 135D 225D LC
1 3. 5 2 2. 5 M E T R I C T O N D EXCAVATORS 135D 225D LC Well armed. Whether it s urban renewal, interstate work, or underground utilities, the 135D and 225D LC will arm you for top productivity. They
ZX210F-3. Road Builder. 122 kw (164 hp) Live Heel Fixed Heel Butt & Top ZX210F
ZAXIS DASH-3 Foresters Road Builder Processor Live Heel Fixed Heel Butt & Top Power Clam Models 122 kw (164 hp) ZX210F ZAXIS DASH-3 Foresters EXTREME Productivity. tough machines for tough jobs. Hitachi
160G LC/180G LC kg (39,024 43,282 lb.) Operating Weight
160G LC/180G LC 17 717 19 650-kg (39,024 43,282 lb.) Operating Weight A longtime favorite because of its load-and-go versatility, the G-Series version of our popular 160 is even more capable. For those
250G LC / 290G LC metric ton
250G LC / 290G LC 25 29 metric ton Accelerate your profitability. 2 3 With more arm force, dig force, and lift capacity making the most of every gallon of fuel, the 250G LC and 290G LC Excavators will
75G/85G EXCAVATORS kg (17,952 19,244 lb.) Operating Weight
75G/85G EXCAVATORS 8143 8729-kg (17,952 19,244 lb.) Operating Weight Fit in more productivity. Neither too big nor too small, these right-size excavators are the perfect solution for a wide variety of
Swing torque 80,800 N m (59,595 lbf ft) Two variable displacement piston pumps L/min ( gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi)
925E EXCAVATOR Tier 4 Final / Stage IV Specifications Operating weight 25,500 kg (56,218 lb) Operating weight includes coolant, lubricants, full fuel tank, cab, standard shoes, boom, arm, bucket and operator
Number of rollers Top, each track 1 Bottom, each track 5 Number of shoes Triple grouser each side 39. Gradeability 70%
CX75 EXCAVATOR TIER III CERTIFIED ENGINE Model Isuzu AU-4LE2X,Tier III certified Type 4-stroke turbocharged Cylinders 4 Bore/Stroke 3.35 in x 3.78 in (85 x 96 mm) Displacement 133 in 3 (2179 cc) Fuel injection
Two variable displacement piston pumps L/min (2 x 79.3 gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi) Travel circuit 34.
922E EXCAVATOR Tier 4 Final / Stage IV Specifications Operating weight 22,800 kg (50,265 lb) SWING SYSTEM ELECTRIC SYSTEM Operating weight includes coolant, lubricants, full fuel tank, cab, standard shoes,
160G LC/180G LC metric ton
160G LC/180G LC 16 18 metric ton Seeking big productivity in a mid-size package? 2 3 The enhanced 160G LC and all-new 180G LC will exceed your expectations. With impressive arm force, dig force, and lift
CX135. Variable displacement axial piston design
CX135 EXCAVATOR TIER III CERTIFIED ENGINE Model Type Isuzu AJ-4JJ1X, Tier III certified 4-stroke, turbocharged Cylinders 4 Bore/Stroke Displacement Fuel injection Fuel injection pump Fuel Fuel filter Cooling
ZX345USLC-6 CONSTRUCTION ULTRASHORT EXCAVATORS
CONSTRUCTION ULTRASHORT EXCAVATORS PERFECTLY PACKAGED PRODUCTIO Whether it's road building or work in congested quarters, the packs all the power you need into its reduced-tail-swing design. The largest
HYDRAULICS. Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (22.8 L/min) Relief pressure psi (3.
CX130 Excavator ENGINE Model... Case 4TA-390 Type... 4-stroke, turbocharged and aftercooled Cylinders... 4 Bore/Stroke... 4.02 x 4.72 (102 x 120 mm) Displacement... 239 in 3 (3.9 L) Fuel injection... Direct
HYDRAULICS. Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (21 L/min) Relief pressure psi (3900 kpa)
9020B Excavator ENGINE Model... Case 4TA-390 Type... 4-stroke, turbocharged and aftercooled Cylinders... 4 Bore/Stroke... 4.02 x 4.72 (102 x 120 mm) Displacement... 239 in 3 (3.9 L ) Fuel injection...
HYDRAULICS. Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (20 L/min) Relief pressure psi (3900 kpa)
9010B Excavator ENGINE Model... Case 4TA-390 Type... 4-stroke, turbocharged and aftercooled Cylinders... 4 Bore/Stroke... 4.02 x 4.72 (102 x 120 mm) Displacement... 239 in 3 (3.9 L) Fuel injection... Direct
Standards. Engine. Hydraulic System. Weights. Service Refill Capacities. Drive. Swing Mechanism. Sound Performance. Track
Engine Engine Model Cat T Diesel Engine Flywheel Power kw hp ISO kw hp SAE J kw hp EEC / kw hp Bore mm. in Stroke mm. in Displacement. L in Gross Power kw hp The C/C L meets US Tier and EU Stage II emissions
75G/85G Excavators kw (56.9 hp)
75G/85G Excavators 42.4 kw (56.9 hp) Fit in more productivity. Neither too big nor too small, these right-size excavators are the perfect solution for a wide variety of tasks. Their reduced-tail-swing
Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (21 L/min) Relief pressure psi (3900 kpa)
9020B Excavator ENGINE Model... Case 4TA-390 Type... 4-stroke, turbocharged and aftercooled Cylinders... 4 Bore/Stroke... 4.02 x 4.72 (102 x 120 mm) Displacement... 239 in 3 (3.9 L ) Fuel injection...
CX800B EXCAVATOR. Number of rollers Top, each track 3 Bottom, each track 9 Number of shoes Double grouser each side 51
CX800B EXCAVATOR TIER III CERTIFIED ENGINE Model Type AH-6WG1XYSS, Tier III certified 4-stroke, turbocharged Cylinders 6 Bore/ Displacement Fuel injection Fuel Fuel filter Cooling Horsepower per SAE J1349
TOUGH WORLD. TOUGH EQUIPMENT.
Engine Yanmar 4TNV98 Net Power 44.5 kw (60 hp) Operating Weight 7,500 kg Bucket Capacity 0.32 m³ 908E EXCAVATOR TOUGH WORLD. TOUGH EQUIPMENT. 1 MAXIMIZE YOUR RETURN ON INVESTMENT POWERFUL ENGINE The 908E
Number of rollers Top, each track 3 Bottom, each track 8 Number of shoes Double grouser each side 47. Variable displacement axial piston design
CX700B EXCAVATOR TIER III CERTIFIED ENGINE Model Type AH-6WG1XYSS, Tier III certified 4-stroke, turbocharged Cylinders 6 Bore/Stroke Displacement 5.79 in x 6.07 in (147 x 154 mm) 957 in 3 (15 700 cc) Grade
Lubricant and Coolant Capacity
Engine Isuzu AI-4HK1X Tier 3 turbocharged diesel engine with electronic fuel control, 153 Net HP (114 kw), 5.2 Liter displacement, 4-cylinder, water-cooled, EGR with cooler, air-toair intercooler, 24-volt
320E L. Hydraulic Excavator
320E L Hydraulic Excavator Engine Drive Engine Model Cat C6.6 ACERT Maximum Travel Speed 5.6 km/h 3.5 mph Net Power SAE J1349 114 kw 153 hp Maximum Drawbar Pull 205 kn 46,086 f Gross Power SAE J1995 122
CX245D SHORT RADIUS EXCAVATOR TIER 4 FINAL CERTIFIED
CX245D SHORT RADIUS EXCAVATOR TIER 4 FINAL CERTIFIED ENGINE Model Emissions Certification Fuel Isuzu AR-4HK1X Turbocharged w/cooled intercooler/ SCR System Tier 4 Final Requires ultra low-sulfur fuel B5
EXCAVATOR STANDARD & DOZER BLADE EQUIPPED TIER 3 CERTIFIED
CX225 MSR EXCAVATOR STANDARD & DOZER BLADE EQUIPPED TIER 3 CERTIFIED ENGINE Model Type Isuzu AI-4HK1X, Tier 3 certified 4-stroke, turbocharged Cylinders 4 Displacement Bore/Stroke Fuel injection Fuel filter
CX130C. Swing mechanism. Swing torque 24,400 lb ft (33,000 N m) Length 12 ft 4 in (3.76 m) Track gauge 6 ft 6 in (1.99 m)
CX130C EXCAVATOR LONG UNDERCARRIAGE (LC) TIER 4 INTERIM CERTIFIED engine Model Isuzu AM-4JJ1X, Tier 4 Interim Certified (Cooled EGR) Fuel Type Cylinders Requires ultra low-sulfur fuel B5 biodiesel tolerant
350G LC/380G LC kg (78,550 83,992 lb.) Operating Weight
350G LC/380G LC 35 650 38 100-kg (78,550 83,992 lb.) Operating Weight Put more work within reach. Whether you re loading trucks, digging trenches, demolishing structures, or placing pipe, you ll get more
S pec1 t 1ca t ions [IT (ID[]] LC sk2solc-10 I Engine Type No. of cylinders Bore and stroke Displacement Rated power output Max. torque I Hydraulic System Direct injection, water-cooled, 4-cycle diesel
CX245D SHORT RADIUS EXCAVATOR DOZER BLADE TIER 4 FINAL CERTIFIED
CX245D SHORT RADIUS EXCAVATOR DOZER BLADE TIER 4 FINAL CERTIFIED ENGINE Model Emissions Certification Fuel Isuzu AR-4HK1X Turbocharged w/cooled intercooler/ SCR System Tier 4 Final Requires ultra low-sulfur
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 Specifications R145LCR-9A ENGINE MODEL Type PERKINS 1204E Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged,
CX210C EXCAVATOR. Swing mechanism. Length 14 ft 8 in (4.47 m) Track gauge 7 ft 10 in (2.4 m) Track Grease lubricated / strutted
CX210C EXCAVATOR LONG UNDERCARRIAGE (LC) TIER 4 INTERIM CERTIFIED engine Model Fuel Type Cylinders Isuzu AM-4HK1X Tier 4 Interim Certified (Cooled EGR) Requires ultra low-sulfur fuel B5 biodiesel tolerant
CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side.
SPECIFICATIONS ENGINE Maker / Model Type Rated flywheel horse power SAE DIN Perkins 1204F Water-cooled, 4-cycle diesel, 4-cylinder inline, Direct injection, Turbocharged, Charge and air cooled J1995 (gross)
CX17BCOMPACT EXCAVATOR
CX17BCOMPACT EXCAVATOR ENGINE Model Mitsubishi L3E-W231KBS Cylinders 3 Bore/Stroke Displacement Fuel injection Fuel injection pump Fuel Fuel filter Cooling 2.99 in x 2.76 in (76 x 70 mm) 58.1 in 3 (952
DX420LC TECHNICAL DATA
DX420LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DV11 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 293 / 1,800 (hp PER SAE J1995) GROSS kw
CX80C EXCAVATOR DOZER BLADE TIER 4 FINAL CERTIFIED
CX80C EXCAVATOR DOZER BLADE TIER 4 FINAL CERTIFIED ENGINE Model Emissions Certification Fuel Type Cylinders Isuzu AP-4LE2X Tier 4 Final Requires ultra low-sulfur fuel B5 biodiesel tolerant Water-cooled,
CX55BMTS OPERATING WEIGHT. Cab with 165 lb (75 kg) operator, 247 lb (112 kg) bucket, full fuel and standard equipment: 11,312 lb (5 130 kg)
CX55BMTS COMPACT EXCAVATOR TIER 4 FINAL CERTIFIED ENGINE Model Yanmar 4TNV88-C-PYB Tier 4 Final Certified Cylinders 4 Bore/ 3.46 x 3.54 in (88 x 90 mm) Displacement 133.6 in 3 (2.2 L) Fuel injection Direct
Specif ications R125LCR-9A
Specif ications R125LCR-9A ENGINE MODEL PERKINS 1204E Water cooled, 4 cycle Diesel, 4-cylinders Type in line, direct injection, turbocharged, charged air cooled and low emission Rated flywheel horse power
Lubricant and Coolant Capacity
Operating Weight: 105,600 lbs (47,900 kg) SAE Net Horsepower: with fan pump 329 HP (245 kw) without fan pump 362 HP (270 kw) Range: 1.58-4.05 yd 3 (1.21-3.10 m 3 ) Engine Isuzu AH-6UZ1XYSS Tier 3 turbocharged
EXCAVATORS 180C W 210C W WHEELED
1 8 2 1 M E T R I C T O N C EXCAVATORS 180C W 210C W WHEELED The wheel deal. Word on the street has it the 180C W and 210C W Wheeled Excavators are perfect for any kind of work. Combining the exceptionally
210G/210G LC. 21 metric ton
210G/210G LC 21 metric ton Cover all the angles. 2 3 Heavier and stronger than their popular predecessors, the 210G and 210G LC are also more productive. So, whether you use them to excavate footings,
CX130C OPERATOR ENVIRONMENT. Sound level ISO6395 inside cab 70 dba Electrical outlet Cab interior light (1) Rear-view camera (1) Air-suspension
CX130C EXCAVATOR LONG UNDERCARRIAGE (LC) TIER 4 INTERIM CERTIFIED ENGINE Model Emissions Certification Fuel Isuzu AM-4JJ1X, Cooled EGR Tier 4 Interim Requires ultra low-sulfur fuel B5 biodiesel tolerant
Lubricant and Coolant Capacity
Operating Weight: 28,440 (12,900 kg) SAE Net Horsepower: 95 HP (71 kw) Bucket Range:.42 -.98 yd 3 (.32 -.75 m 3 ) Engine Isuzu AJ-4JJ1X Tier 3 turbocharged diesel engine with electronic fuel control, 4-cylinder,
CX80C OPERATOR ENVIRONMENT
CX80C EXCAVATOR SWING BOOM TIER 4 FINAL CERTIFIED PRELIMINARY ENGINE Model Type Cylinders Isuzu AP-4LE2X, Tier 4 Final Certified Water-cooled, 4-cycle. Turbo-charged w/ air-cooled intercooler w/ DOC 4-cylinder
470G LC. 47 metric ton
470G LC 47 metric ton Next-cavator. 2 3 Looking to give productivity a boost? We ve got your number 470G LC. Like its highly popular predecessors, this enhanced excavator gets work done with smooth, one-of-akind
CRAWLER EXCAVATORS EH160 LC. Specifications.
CRAWLER EXCAVATORS Specifications EH160 LC www.newhollandconstruction.com EH160 LC MACHINE DIMENSIONS A M C E I F L G H D K J B Standard Arm Optional Arm Arm Length 10 2 (3.10 m) 8 6 (2.60 m) A. Overall
Engine 310SK 310SK TC John Deere PowerTech E 4045HT063 turbocharged,
SK/SK TC Engine SK SK TC Manufacturer and Model John Deere PowerTech TM E HT7 turbocharged, standard John Deere PowerTech E HT6 turbocharged, standard Non-Road Emissions Standard EPA Interim Tier /EU Stage
CX250C CAB AND CONTROLS. Sound level inside cab ISO dba Electrical outlet Cab interior light. Air-suspension
CX250C EXCAVATOR LONG UNDERCARRIAGE (LC) TIER 4 INTERIM CERTIFIED ENGINE Model Emissions Certification Fuel Isuzu AM-4HK1X Cooled EGR Tier 4 Interim Requires ultra-low sulfur fuel B5 biodiesel tolerant
DX140LC TECHNICAL DATA
DX140LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 98.6 / 1,850 (hp PER SAE J1995) GROSS
EC220E. VOLVO EXCAVATORS t / 45,350-55,360 lb 173 hp
EC220E VOLVO EXCAVATORS 20.6-25.1 t / 45,350-55,360 lb 173 hp Volvo EC220E in detail. Engine The latest generation, Volvo engine Tier 4f / Stage IV emissions compliant diesel engine fully meets the demands
Lubricant and Coolant Capacity
Operating Weight: 105,600 lbs (47,900 kg) SAE Net Horsepower: with fan pump 329 HP (245 kw) without fan pump 362 HP (270 kw) Range: 1.58-4.05 yd 3 (1.21-3.10 m 3 ) Engine Isuzu AH-6UZ1XYSS Tier 3 turbocharged
EC140B LC VOLVO EXCAVATOR
VOLVO EXCAVATOR EC140B LC Engine power, gross: 73 kw 98 hp Operating weight: 13.4 ~ 15.2 t 29,529 ~ 33,450 lb Buckets (SAE): 600 ~ 975 l 0.78 ~ 1.28 yd 3 Turbocharged Volvo diesel engine with direct injection
6908 EXCAVATOR FEATURES. 131-SAE-net-hp (98 kw) turbocharged John Deere diesel. 21-ft. (6.40 m) digging. 3Q-ft. (9.14 m) reach at ground
"-- 6908 EXCAVATOR ASTEk' '. ENGNE PERFORMANCE FEATURES ' '" Nm b-ft 1 380 TOROUE- 488 :360 461 340 " 434 320 f- ::J 401 3001 W 380 280 hp kw g/kwh ib/ hph HORSEPOWER -- 140 104 120 89...J 274 0.4 100
22 Tonne Excavator.
22 Tonne Excavator www.premiairhire.com.au CAB COMFORT & VISABILITY All-around visibility and an excellent operator environment are at the centre of Volvo s cab design. The EC220D features new Volvo styling.
EH70 EH80 MIDI EXCAVATORS
EH70 EH80 MIDI EXCAVATORS Work easily in cramped spaces 3 work mode selections Excellent visibility Easy routine maintenance www.newhollandconstruction.com DIGGING POWER THAT FITS WHERE OTHER MACHINES
CX160C OPERATOR ENVIRONMENT. Sound level inside cab ISO dba Electrical outlet Cab interior light
CX160C EXCAVATOR LONG UNDERCARRIAGE (LC) TIER 4 INTERIM CERTIFIED ENGINE Model Emissions Certification Fuel Type Cylinders Isuzu AM-4JJ1X Cooled EGR Tier 4 Interim Requires ultra low-sulfur fuel B5 biodiesel
HYDRAULIC EXCAVATOR PC308USLC-3 308US. NET HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 70,383 73,146 lb
NET HORSEPOWER 134 kw 179 HP @ 2050 rpm OPERATING WEIGHT 31925 33178 kg 70,383 73,146 lb PC308USLC-3 BUCKET CAPACITY 0.74 1.87 m 3 0.97 2.45 yd 3 PC 308US LC Photo may include optional equipment. HYDRAULIC
350G LC. 35 metric ton
350G LC 35 metric ton Put more work within reach. Stronger and faster, this new G-Series Excavator is our most productive 350 ever. So whether you re loading trucks, digging trenches, or placing pipe,
CX300C EXCAVATOR CAB AND CONTROLS. Sound level inside cab ISO6395 Electrical outlet Cab interior light. 20 ft 2 in (6 150 mm)
CX300C EXCAVATOR TIER 4 INTERIM CERTIFIED ENGINE Model Emissions Certification Fuel Isuzu AM-6HK1X Cooled EGR Tier 4 Interim Requires ultra low-sulfur fuel B5 biodiesel tolerant Type Water-cooled, 4-cycle,
TXC 225LC-1 HYDRAULIC EXCAVATOR TXC 225LC-1. Hydraulic Excavator
Hydraulic Excavator OPERATING WEIGHT NET ENGINE POWER MAX DIG DEPTH MAX REACH 47,400 lbs (21,500 kg) 148 hp (110 kw) @ 1,950 rpm 21' 9" (6,630 mm) 32' 6" (9,910 mm) HYDRAULIC EXCAVATOR FEATURES Powerful,
335F L. Hydraulic Excavator 2017
335F L Hydraulic Excavator 2017 Engine Drive Engine Model Cat C7.1 ACERT Maximum Travel Speed 4.2/2.6 km/h 2.6/1.6 mph Gross Power SAE J1995 152 kw 204 hp Maximum Drawbar Pull 295 kn 66,319 lbf Net Power
Specifications R220LC-9A / R220NLC-9A
Specifications R220LC9A / R220NLC9A ENGINE MODEL Type CUMMINS QSB6.7 Water cooled, 4 cycle Diesel, 6Cylinders in line, direct injection, turbocharged, charged air cooled and low emission Rated flywheel
210G/210G LC. 21 metric ton
210G/210G LC 21 metric ton Cover all the angles. 2 3 Heavier and stronger than their popular predecessors, the 210G and 210G LC are also more productive. So, whether you use them to excavate footings,
STATE OF MINNESOTA PRICING PAGES (Typed responses required)
Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: RDO Equipment Company / Nortrax Jesse Miller 12500 Dupont Avenue South Burnsville,
15,432 lbs. (7 000 kg) Operating Weight
15,432 lbs. (7 000 kg) Operating Weight 1600 Quantum Specifications ENGINE Isuzu 4JB1direct injected, water cooled, 4-cycle diesel, 4 cylinder, 169.1 CID (2 771 cc), 3.66" (93 mm) bore x 4.02" (102 mm)
CX75C OPERATOR ENVIRONMENT
CX75C MSR EXCAVATOR STANDARD & OFFSET BOOM TIER 4 FINAL CERTIFIED PRELIMINARY ENGINE Model Emissions Certification Fuel Type Cylinders Isuzu AP-4LE2X Tier 4 Final Requires ultra low-sulfur fuel B5 biodiesel
ZX35U-5 ZX50U-5 ZX60USB-5
ZX35U-5 ZX50U-5 ZX60USB-5 COMPACT EXCAVATORS SMALL MACHINES. BIG IMPACT Small and compact, the ZX35U-5, ZX50U-5 and ZX60USB-5 make a big impact on all kinds of jobs. You get a spacious cab with wider,
FORESTRY MACHINE PC200LL-7. Purpose Built Forestry Machine Road Builder, Log Loader Heel Type, Processor/Delimber Carrier
NET HORSEPOWER 107 kw 143 HP @ 1950 rpm OPERATING WEIGHT 28610 kg 63,074 lb Purpose Built Forestry Machine Road Builder, Log Loader Heel Type, Processor/Delimber Carrier PC 200 LL FORESTRY MACHINE Local
With Tier 4 Interim Engine installed. hyundai heavy industries
With Tier 4 Interim Engine installed hyundai heavy industries 1 Pride at Work Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,
EC380EHR, EC480EHR VOLVO EXCAVATORS
, VOLVO EXCAVATORS Volvo, E480EHR in detail. Engine The latest generation, Volvo engine Tier 4f (Stage IV) emissions compliant diesel engine fully meets the demands of the latest, emsissions regulations.
EC380EHR, EC480EHR, EC750EHR. Volvo Excavators
EC380EHR, EC480EHR, EC750EHR Volvo Excavators Volvo EC380EHR, E480EHR, EC750EHR in detail Engine The latest generation, Volvo engine Stage V emissions certified diesel engine fully meets the demands of
From World First to World Leader
HYDRAULIC EXCAVATOR TB235-2 From World First to World Leader Product Features & Specifications ENGINE - U.S. EPA Final Tier 4 - Automatic Fuel Bleed System - Dual Element Air Filter - Automatic Idle ELECTRICAL
SUPER LONG FRONTS. n Zaxis 200LC-3, Zaxis 240LC-3, Zaxis 270LC-3, and Zaxis 350LC-3
SUPER LONG FRONTS n Zaxis 200LC-3, Zaxis 240LC-3, Zaxis 270LC-3, and Zaxis 350LC-3 SUPER LONG FRONTS 200LC-3, 240LC-3, 270LC-3 SPECIFICATIONS Operating Information 200LC-3 240LC-3 270LC-3 Arm Length...20
308E. Mini Hydraulic Excavator
308E Mini Hydraulic Excavator Engine Weights Engine Model Cat C3.3 DI Turbo Operating Weight Standard Stick 7160 kg Net Power @ 2,400 rpm 46.8 kw Operating Weight Long Stick 7190 kg Gross Power @ 2,000
9035EZTS COMPACT EXCAVATOR
9035EZTS COMPACT EXCAVATOR Engine Yanmar 3TNV88F-ESLY Tier 4 Final Gross Power 24.4 Hp (18.2 kw) Operating Weight with Canopy 8,510 (3,860 ) Bucket Capacity 0.14 yd3 (0.11 m3) T O U G H W O R L D. T O