135G/245G LC EXCAVATORS

Transcription

1 135G/245G LC EXCAVATORS kg (31,500 56,830 b.) Operating Weight Courtey of Machine.Market

2 Urban egend. Whether your work i urban renewa, treet repair, or underground utiitie, the 135G and 245G LC deiver egendary performance. Durabe EPA Fina Tier 4 (FT4)/EU Stage IV diee meet rigid emiion reguation, o you can work, everywhere there work without compromiing power, reiabiity, or eae of operation. Key peciication 135G 245G LC Operating weight 75 kw (101 hp) 119 kw (159 hp) Lifting capacity kg (31,500 33,920 b.) kg (56,830 b.) Maximum digging depth 4110 kg (8,910 b.) 7400 kg (15,850 b.) Arm digging force 5.98 m (20 ft. 0 in.) 6.62 m (21 ft. 9 in.) Bucket digging force 61 kn (13,710 b.) 114 kn (25,630 b.) 104 kn (23,380 b.) 158 kn (35,520 b.) Net rated power 2 3 Courtey of Machine.Market

3 Courtey of Machine.Market

4 Eay treet. No need to weat it. Our reduced-tai-wing excavator give your operator everything they need to get the job done. Whether up againt a wa or between a rock and a hard pace, our 135G and 245G LC coe-quarter peciait make it a ook pretty eay. 4 5 Powerwie III hydrauic management ytem perfecty baance engine performance and hydrauic ow for predictabe operation. Three productivity mode et an operator chooe the digging tye that it the job. High-productivity deiver more power and fater hydrauic repone to move more materia. Power deiver a baance of power, peed, and fue economy for norma operation. Economy reduce top peed and hep ave fue. Optiona 135G backi bade add tabiity and eiminate the need for extra equipment. 500-mm (20 in.) optiona rubber crawer pad hep reduce damage to concrete or aphat when working on treet repair or in houing deveopment. 1. When the going get tough, impy pre the power-boot button on the right-hand contro and muce through. It tandard on both excavator. 2. Generou ow, arm force, and wing torque hep peed cyce. So you can do your bet to tay on chedue, or ahead of the weather. 3. For tak that require extra inee, hort-throw ow-effort contro, one-of-a-kind metering, and mooth mutifunction operation provide the preciion you need. Courtey of Machine.Market

5 1 2 3 Courtey of Machine.Market

6 Put more productivity on peed dia. Now it eaier than ever for operator to dia thing up. The 135G and 245G LC reined monitor empoy a rotary contro that make it quick and eay to tap into an abundance of performance and convenience function and feature. New hood deign enure optima viibiity to the ide and rear, even with the increaed under-the-hood pace requirement of FT4/ Stage IV engine component. We ve got your back with a cupted mechanica-upenion high-back eat tandard on the 135G. Seat ide together or independent of the joytick conoe, o it won t cramp an operator tye. Standard air-upenion heated eat in the 245G LC keep operator comfortaby upported and productive. Ergonomicay correct hort-throw piot ever provide mooth, predictabe ingertip contro with e movement or effort. Siding witch aow proportiona peed contro, for efforte ingertip command. With arge ef-ceaning tep and wide entryway, getting in and out of our excavator ha never been eaier. Standard boom/frame ight and iedintaed cab/boom-mounted ight provide iumination to extend your workday beyond norma dayight hour. Operator wi ao appreciate the paciou weappointed cab, virtuay unobtructed a-round viibiity incuding a tandard rearview camera, and numerou other amenitie that provide everything they need to do their bet work. 6 7 Courtey of Machine.Market

7 Siding witch aow proportiona peed contro for tandard auxiiary hydrauic, maximizing veratiity and machine utiization. 1. Muti-anguage LCD monitor and rotary dia provide intuitive acce to a weath of information and function. Jut turn and tap to eect work mode, acce operating info, check maintenance interva, ource diagnotic code, adjut cab temperature, and tune the radio. Pu much more. 2. Automatic, high-veocity bi-eve cimate-contro ytem with automotive-tye adjutabe ouver hep keep the ga cear and the cab comfortabe. 1 2 Courtey of Machine.Market

8 Nothing run ike a Deere, becaue nothing i buit ike one. It not jut their mooth-a-ik operation that eparate our excavator from the ret. Durabiity i unmatched, too. When you know how they re buit, you run a Deere Courtey of Machine.Market

9 1. With arge ider, roer, and trutted ink, the eaed and ubricated undercarriage deiver ong and reiabe performance. 2. Thick-pate inge-heet mainframe, box-ection track frame, and indutry-excuive doube-ea wing bearing deiver rock-oid durabiity. 3. Highy eficient heavy-duty cooing ytem keep thing coo, even in tough environment or high atitude. Coo-on-demand uction-type fan hep reduce materia buidup and maintenance. A John Deere excuive, three weded bukhead within the boom reit toriona tre for unurpaed durabiity. Boom, arm, and mainframe are o tough, they re warranted for three year or 10,000 hour. Unique three-pump 245G LC hydrauic ytem provide even more ow. The third pump uppie additiona hydrauic oi to the wing circuit a demanded, for maximum productivity without depeting oi reerve, owing other function, or acriicing fue economy. Courtey of Machine.Market

10 Uncover the many way we hep minimize maintenance. Like a of our equipment, the 135G and 245G LC are oaded with feature that make them hae-free to ervice and ow cot to maintain. From grouped ervice point to at-a-gance gauge, maintenance ha been minimized. The FT4/Stage IV engine require no diee particuate iter (DPF). Extended ervice interva hep maximize uptime. And chedued maintenance i eay to track uing JDLink Utimate and the in-cab monitor. Vertica pin-on fue and engine oi iter are poitioned for convenient and impiied ervicing. Large fue tank and 500- and 5,000hour engine and hydrauic oi-ervice interva decreae downtime for routine maintenance. Battery-diconnect witch, eaiy acceibe in the rear door behind the cab, hep extend battery ife Upper-tructure handrai provide three point of contact when acceing the engine compartment. Sip-reitant urface hep improve tabiity. 2. Eay-to-navigate LCD monitor track uid eve and chedued maintenance interva and iue reminder. Shoud a probem arie, it provide diagnotic information to hep decreae downtime. 3. Auto-ide automaticay reduce engine peed when hydrauic aren t in ue. Auto hutdown further preerve preciou fue. Courtey of Machine.Market

11 John Deere WorkSight i an excuive uite of teematic oution that increae uptime whie owering operating cot. At it heart, JDLink Utimate machine monitoring provide rea-time utiization data and aert to hep you maximize productivity and eficiency whie minimizing downtime. Remote diagnotic enabe your deaer to read code, record performance data, and even update oftware without a trip to the jobite. 1 2 Utimate Uptime, featuring John Deere WorkSight, i a cutomizabe upport oution avaiabe excuivey from your Deere deaer. Thi exibe offering maximize equipment avaiabiity with tandard John Deere WorkSight capabiitie that can hep prevent future downtime and peed repair when needed. In addition to the bae John Deere WorkSight feature, our deaer work with you to buid an uptime package that meet the peciic need of your machine, eet, project, and buine, incuding cutomized maintenance and repair agreement, onite part avaiabiity, extended warrantie, uid amping, repone-time guarantee, and more. 3 Courtey of Machine.Market

12 135G Engine Manufacturer and Mode Non-Road Emiion Standard Net Rated Power (ISO 9249) Cyinder Dipacement Off-Leve Capacity Apiration Cooing Direct-drive uction-type fan Powertrain 2-peed prope with automatic hift Maximum Trave Speed Low High Drawbar Pu Hydrauic Open center, oad ening Main Pump Maximum Rated Fow Piot Pump Maximum Rated Fow Preure Setting Sytem Operating Preure Circuit Impement Trave Swing Power Boot Contro Cyinder Boom (2) Arm (1) Bucket (1) Eectrica Number of Batterie (12 vot) Battery Capacity Aternator Rating Work Light Undercarriage Roer (per ide) Carrier Track Shoe (per ide) Track Adjutment Guide Chain Ground Preure Rubber Crawer Pad, 500 mm (20 in.) Tripe Semi-Grouer Shoe 600 mm (24 in.) 700 mm (28 in.) 135G Bae engine for ue in the U.S., U.S. Territorie, and Canada Iuzu 4JJ1 EPA Fina Tier 4/EU Stage IV 75 kw (101 hp) at 2,000 rpm L (182 cu. in.) 70% (35 deg.) Turbocharged, air-to-air charge-air cooer 3.4 km/h (2.1 mph) 5.5 km/h (3.4 mph) kg (24,729 b.) 2 variabe-dipacement axia-piton pump 105 L/m (28 gpm) x 2 1 gear 32.9 L/m (8.7 gpm) 3930 kpa (570 pi) kpa (4,975 pi) kpa (5,047 pi) kpa (4,685 pi) kpa (5,265 pi) Piot ever, hort troke, ow-effort hydrauic piot contro with hutoff ever Bore 105 mm (4.13 in.) 115 mm (4.53 in.) 100 mm (3.94 in.) Rod Diameter 70 mm (2.76 in.) 80 mm (3.15 in.) 70 mm (2.76 in.) Stroke 941 mm (37.05 in.) 1135 mm (44.69 in.) 875 mm (34.45 in.) CCA 50 amp 2 haogen (1 mounted on boom, 1 on frame) Hydrauic Front ider Seaed and ubricated Without Bade 43 kpa (6.24 pi) With Bade 46 kpa (6.67 pi) 37 kpa (5.37 pi) 32 kpa (4.64 pi) 39 kpa (5.66 pi) 34 kpa (4.93 pi) Courtey of Machine.Market

13 CENTERLINE OF SWING Swing Mechanim 135G Speed 13.3 rpm Torque Nm (25,000 b.-ft.) Serviceabiity Rei Capacitie Fue Tank 220 L (58 ga.) Cooing Sytem 21 L (22.2 qt.) Engine Oi with Fiter 17 L (18 qt.) Hydrauic Tank 60 L (15.9 ga.) Hydrauic Sytem 155 L (40.9 ga.) Gearbox Swing 3.2 L (3.4 qt.) Prope (each) 4 L (4.2 qt.) Diee Exhaut Fuid (DEF) Tank 12 L (12.7 qt.) Operating Weight With fu fue tank; 79-kg (175 b.) operator; 914-mm (36 in.), 0.62-m3 (0.81 cu. yd.), 448-kg (987 b.) heavy-duty bucket; 3.01-m (9 ft. 11 in.) arm; and 3650-kg (8,047 b.) counterweight Operating Weight Without Bade With Bade Rubber Crawer Pad, 500 mm (20 in.) kg (30,620 b.) kg (32,820 b.) Tripe Semi-Grouer Shoe 600 mm (24 in.) kg (31,060 b.) kg (33,260 b.) 700 mm (28 in.) kg (31,500 b.) kg (33,920 b.) Optiona Component Undercarriage Rubber Crawer Pad, 500 mm (20 in.) 4210 kg (9,270 b.) 5247 kg (11,560 b.) Tripe Semi-Grouer Shoe 600 mm (24 in.) 4436 kg (9,770 b.) 5473 kg (12,060 b.) 700 mm (28 in.) 4628 kg (10,190 b.) 5701 kg (12,560 b.) 1-Piece Boom (with arm cyinder) 995 kg (2,190 b.) Arm with Bucket Cyinder and Linkage 2.52 m (8 ft. 3 in.) 594 kg (1,310 b.) 3.01 m (9 ft. 11 in.) 663 kg (1,460 b.) Boom-Lift Cyinder (2), Tota Weight 232 kg (510 b.) Operating Dimenion Arm Length 2.52 m (8 ft. 3 in.) 3.01 m (9 ft.11 in.) Arm Digging Force E SAE 67 kn (15,060 b.) 60 kn (13,490 b.) ISO 69 kn (15,510 b.) 61 kn (13,710 b.) Bucket Digging Force SAE 91 kn (20,460 b.) 91 kn (20,460 b.) ISO 104 kn (23,380 b.) 104 kn (23,380 b.) A Maximum Reach 8.39 m (27 ft. 6 in.) 8.86 m (29 ft. 2 in.) A Maximum Reach at Ground Leve 8.24 m (26 ft. 8 in.) 8.72 m (28 ft. 4 in.) B Maximum Digging Depth 5.49 m (18 ft. 4 in.) 5.98 m (20 ft. 0 in.) C B Maximum Digging Depth at 2.44-m 5.27 m (17 ft. 6 in.) 5.79 m (19 ft. 2 in.) (8 ft. 0 in.) Fat Bottom D C Maximum Cutting Height 9.29 m (30 ft. 10 in.) 9.69 m (31 ft. 8 in.) D Maximum Dumping Height 6.83 m (22 ft. 6 in.) 7.22 m (23 ft. 4 in.) E Minimum Swing Radiu 2.11 m (6 ft. 8 in.) 2.45 m (8 ft. 4 in.) F Maximum Vertica Wa 4.73 m (15 ft. 10 in.) 5.19 m (16 ft. 8 in) GROUND LINE A B' B A' F Courtey of Machine.Market

14 Machine Dimenion Arm Length A Overa Length B Overa Height C Rear-End Length/Swing Radiu D Ditance Between Ider/Sprocket Centerine E Undercarriage Length F Counterweight Cearance G Uppertructure Width H Cab Height I Track Width With Rubber Crawer Pad With Tripe-Semi Grouer Shoe J Gauge Width K Ground Cearance L Overa Width Rubber Crawer Pad, 500 mm (20 in.) Tripe Semi-Grouer Shoe 600 mm (24 in.) 700 mm (28 in.) M Bade Lift Height N Bade Cut Beow Grade O Bade Lift Ange Bade Length Height Width Rubber Crawer Pad, 500 mm (20 in.) Tripe Semi-Grouer Shoe 600 mm (24 in.) 700 mm (28 in.) Lift Capacitie 135G 2.52 m (8 ft. 3 in.) 7.37 m (24 ft. 2 in.) 2.79 m (9 ft. 2 in.) 1.49 m (4 ft. 11 in.) 2.88 m (9 ft. 5 in.) 3.58 m (11 ft. 9 in.) 840 mm (33 in.) 2.48 m (8 ft. 2 in.) 2.87 m (9 ft. 5 in.) 3.01 m (9 ft. 11 in.) 7.39 m (24 ft. 3 in.) 2.78 m (9 ft. 1 in.) C F B 500 mm (20 in.) 600 mm (24 in.) / 700 mm (28 in.) 1.99 m (6 ft. 6 in.) 410 mm (16 in.) D E A 2.49 m (8 ft. 2 in.) 2.59 m (8 ft. 6 in.) 2.69 m (8 ft. 10 in.) 460 mm (18 in.) 540 mm (21 in.) 28.5 deg. G H M O 2.51 m (8 ft. 3 in.) 460 mm (18 in.) 2490 mm (8 ft. 2 in.) 2490 mm (8 ft. 2 in.) 2690 mm (8 ft. 10 in.) K J L I N Bodface type indicate hydrauicay imited capacity; ightface type indicate tabiity-imited capacitie, in kg (b.). A ift capacitie are baed on ISO (with power boot). Machine equipped with 414-kg (913 b.) bucket and tandard counterweight; and ituated on irm, eve, uniform upporting urface. Tota oad incude weight of cabe, hook, etc. Figure do not exceed 87 percent of hydrauic capacitie or 75 percent of weight needed to tip machine. HORIZONTAL DISTANCE FROM CENTERLINE OF ROTATION 1.5 m (5 ft.) 3.0 m (10 ft.) 4.5 m (15 ft.) 6.0 m (20 ft.) 7.5 m (25 ft.) LOAD POINT HEIGHT With 2.52-m (8 ft. 3 in.) arm and 500-mm (20 in.) rubber crawer pad, without bade 6.0 m (20 ft.) (7,340) (7,200) 4.5 m (15 ft.) (7,830) (7,830) (7,750) (7,070) (6,490) (4,180) 3.0 m (10 ft.) (13,390) (13,100) (9,470) (6,660) (6,360) (4,050) 1.5 m (5 ft.) (15,850) (11,570) (9,830) (6,150) (6,140) (3,840) Ground Line (13,410) (10,950) (9,430) (5,790) (5,950) (3,670) 1.5 m ( 5 ft.) (9,790) (9,790) (18,950) (10,900) (9,290) (5,660) (5,900) (3,620) 3.0 m ( 10 ft.) (18,630) (18,630) (15,240) (11,140) (9,400) (5,770) With 3.01-m (9 ft. 11 in.) arm and 500-mm (20 in.) rubber crawer pad, bade on ground 6.0 m (20 ft.) (6,170) (6,170) 4.5 m (15 ft.) (6,710) (6,710) (6,410) (4,620) 3.0 m (10 ft.) (10,240) (10,240) (8,490) (7,310) (7,260) (4,450) 1.5 m (5 ft.) (17,310) (12,820) (10,750) (6,740) (8,210) (4,210) (3,700) (2,790) Ground Line (14,570) (11,870) (12,340) (6,300) (8,910) (4,000) 1.5 m ( 5 ft.) (8,490) (8,490) (18,970) (11,650) (12,560) (6,090) (8,850) (3,890) 3.0 m ( 10 ft.) (15,430) (15,430) (16,770) (11,800) (11,050) (6,120) 4.5 m ( 15 ft.) (10,500) (10,500) Courtey of Machine.Market

15 Lift Capacitie (continued) 135G Bodface type indicate hydrauicay imited capacity; ightface type indicate tabiity-imited capacitie, in kg (b.). A ift capacitie are baed on ISO (with power boot). Machine equipped with 414-kg (913 b.) bucket and tandard counterweight; and ituated on irm, eve, uniform upporting urface. Tota oad incude weight of cabe, hook, etc. Figure do not exceed 87 percent of hydrauic capacitie or 75 percent of weight needed to tip machine. HORIZONTAL DISTANCE FROM CENTERLINE OF ROTATION 1.5 m (5 ft.) 3.0 m (10 ft.) 4.5 m (15 ft.) 6.0 m (20 ft.) 7.5 m (25 ft.) LOAD POINT HEIGHT With 3.01-m (9 ft. 11 in.) arm and 600-mm (24 in.) tripe emi-grouer hoe, bade on ground 6.0 m (20 ft.) (6,170) (6,170) 4.5 m (15 ft.) (6,710) (6,710) (6,410) (4,540) 3.0 m (10 ft.) (10,240) (10,240) (8,490) (7,200) (7,260) (4,370) 1.5 m (5 ft.) (17,310) (12,630) (10,750) (6,630) (8,210) (4,130) (3,700) (2,740) Ground Line (14,570) (11,690) (12,340) (6,190) (8,910) (3,920) 1.5 m ( 5 ft.) (8,490) (8,490) (18,970) (11,470) (12,560) (5,980) (8,850) (3,820) 3.0 m ( 10 ft.) (15,430) (15,430) (16,770) (11,610) (11,050) (6,010) m ( 15 ft.) 5030 (10,500) (10,500) With 3.01-m (9 ft. 11 in.) arm and 700-mm (28 in.) tripe emi-grouer hoe, bade on ground 6.0 m (20 ft.) (6,170) (6,170) 4.5 m (15 ft.) (6,710) (6,710) (6,410) (4,610) m (10 ft.) 4910 (10,240) (10,240) (8,490) (7,300) (7,260) (4,440) 1.5 m (5 ft.) (17,310) (12,800) (10,750) (6,730) (8,210) (4,200) (3,700) (2,790) Ground Line (14,570) (11,860) (12,340) (6,290) (8,910) (3,990) 1.5 m ( 5 ft.) (8,490) (8,490) (18,970) (11,640) (12,560) (6,080) (8,850) (3,880) 3.0 m ( 10 ft.) (15,430) (15,430) (16,770) (11,780) (11,050) (6,110) 4.5 m ( 15 ft.) (10,500) (10,500) Bucket A fu ine of bucket i offered to meet a wide variety of appication. Digging force are with power boot. Bucket are equipped with John Deere TK-Serie Bucket Teeth tandard. Repaceabe cutting edge and a variety of teeth are avaiabe through John Deere Part. Optiona ide cutter add 150 mm (6 in.) to bucket width. Capacitie are SAE heaped rating. Bucket Type Bucket Width Bucket Capacity Bucket Weight cu. yd. kg b. mm in. m3 Heavy Duty ,065 Ditching ,007 Bucket Seection Guide* BUCKET SIZE m3 (cu. yd.) 1.3 (1.75) 1.2 (1.50) 1.0 (1.25) Deere 2.52-m (8 ft. 3 in.) Arm 0.8 (1.00) Deere 3.01-m (9 ft. 11 in.) Arm 0.6 (0.75) 0.4 (0.50) , , Wet Sand, Grave Moit Sand Wet Cay, Granite 3,200 3, Wet Sand 2, Wet Earth Limetone 1500 Dry Cay Shae 2,600 2, Dry Sand 2, Caiche Coa Topoi Wet Peat b./cu. yd. 1,200 1,400 1,600 1,800 2,000 kg/m * Contact your John Deere deaer for optimum bucket and attachment eection. Thee recommendation are for genera condition and average ue. Doe not incude optiona equipment uch a thumb or couper. Larger bucket may be poibe when uing ight materia, for fat and eve operation, e compacted materia, and voume oading appication uch a ma-excavation appication in idea condition. Smaer bucket are recommended for advere condition uch a off-eve appication, rock, and uneven urface. Bucket capacity indicated i SAE heaped. Courtey of Machine.Market

16 245G LC Engine Manufacturer and Mode Non-Road Emiion Standard Net Rated Power (ISO 9249) Cyinder Dipacement Off-Leve Capacity Apiration Cooing Direct-drive uction-type fan Powertrain 2-peed prope with automatic hift Maximum Trave Speed Low High Drawbar Pu Hydrauic Open center, oad ening Main Pump Maximum Rated Fow Piot Pump Maximum Rated Fow Preure Setting Sytem Operating Preure Circuit Impement Trave Swing Power Boot Contro Cyinder Boom (2) Arm (1) Bucket (1) Eectrica Number of Batterie (12 vot) Battery Capacity Aternator Rating Work Light Undercarriage Roer (each ide) Carrier Track Shoe, Tripe Semi-Grouer (each ide) Track Adjutment Guide Chain 245G LC Bae engine for ue in the U.S., U.S. Territorie, and Canada Iuzu 4HK1 EPA Fina Tier 4/EU Stage IV 119 kw (159 hp) at 2,000 rpm L (317 cu. in.) 70% (35 deg.) Turbocharged, air-to-air charge-air cooer 3.5 km/h (2.2 mph) 5.5 km/h (3.4 mph) kg (45,636 b.) 3 variabe-dipacement axia-piton pump 212 x L/m (56 x gpm) 1 gear 30 L/m (7.9 gpm) 3999 kpa (580 pi) kpa (4,970 pi) kpa (5,150 pi) kpa (4,680 pi) kpa (5,510 pi) Piot ever, hort troke, ow-effort hydrauic piot contro with hutoff ever Bore 120 mm (4.72 in.) 135 mm (5.31 in.) 115 mm (4.53 in.) Rod Diameter 85 mm (3.35 in.) 95 mm (3.74 in.) 80 mm (3.15 in.) Stroke 1260 mm (49.61 in.) 1475 mm (58.07 in.) 1060 mm (41.73 in.) CCA 50 amp 2 haogen (1 mounted on boom, 1 on frame) Hydrauic Center Seaed and ubricated Courtey of Machine.Market

17 CENTERLINE OF SWING Ground Preure 245G LC Tripe Semi-Grouer Shoe 700 mm (28 in.) 45 kpa (6.53 pi) 800 mm (32 in.) 40 kpa (5.80 pi) Swing Mechanim Speed 11.8 rpm Torque Nm (50,000 b.-ft.) Serviceabiity Rei Capacitie Fue Tank 380 L (100.4 ga.) Cooing Sytem 28 L (29.6 qt.) Engine Oi with Fiter 23 L (24.3 qt.) Hydrauic Tank 130 L (34.3 ga.) Hydrauic Sytem 240 L (63.4 ga.) Gearbox Swing 6.2 L (6.6 qt.) Prope (each) 6.8 L (7.2 qt.) Swing Bearing Greae Bath 17 L (18 qt.) Diee Exhaut Fuid (DEF) Tank 16 L (16.9 qt.) Operating Weight With fu fue tank; 79-kg (175 b.) operator; 1219-mm (48 in.), 1.09-m3 (1.43 cu. yd.), 871-kg (1,921 b.) heavy-duty bucket; 2.91-m (9 ft. 7 in.) arm; and 7280-kg (16,050 b.) counterweight Operating Weight with Tripe Semi-Grouer Shoe 700 mm (28 in.) kg (56,170 b.) 800 mm (32 in.) kg (56,830 b.) Optiona Component Undercarriage with Tripe Semi-Grouer Shoe 700 mm (28 in.) 8002 kg (17,630 b.) 800 mm (32 in.) 8278 kg (18,230 b.) 1-Piece Boom (with arm cyinder) 1760 kg (3,880 b.) 2.91-m (9 ft. 7 in.) Arm with Bucket Cyinder 918 kg (2,020 b.) and Linkage Boom-Lift Cyinder (2), Tota Weight 340 kg (750 b.) Operating Dimenion Arm Length 2.91 m (9 ft. 7 in.) Arm Digging Force E SAE 110 kn (24,730 b.) ISO 114 kn (25,630 b.) Bucket Digging Force SAE 141 kn (31,700 b.) ISO 158 kn (35,520 b.) A Maximum Reach m (33 ft. 2 in.) A Maximum Reach at Ground Leve 9.90 m (32 ft. 6 in.) C B Maximum Digging Depth 6.62 m (21 ft. 9 in.) B Maximum Digging Depth at 2.44-m 6.41 m (21 ft. 0 in.) D (8 ft. 0 in.) Fat Bottom C Maximum Cutting Height m (36 ft. 10 in.) D Maximum Dumping Height 8.92 m (29 ft. 3 in.) E Minimum Swing Radiu 2.38 m (7 ft. 10 in.) F Maximum Vertica Wa 5.81 m (19 ft. 1 in.) GROUND LINE A B' B A' F Courtey of Machine.Market

18 Machine Dimenion 245G LC Arm Length 2.91 m (9 ft. 7 in.) A Overa Length 9.11 m (29 ft. 11 in.) B Overa Height 2.98 m (9 ft. 9 in.) C Rear-End Length/Swing Radiu 1.68 m (5 ft. 6 in.) D Ditance Between Ider/Sprocket Centerine 3.66 m (12 ft. 0 in.) E Undercarriage Length 4.46 m (14 ft. 8 in.) F Counterweight Cearance 980 mm (3 ft. 3 in.) G Uppertructure Width 2.97 m (9 ft. 9 in.) H Cab Height 3.03 m (9 ft. 11 in.) I Track Width with Tripe Semi-Grouer Shoe 700 mm (28 in.) / 800 mm (32 in.) J Gauge Width 2.39 m (7 ft. 10 in.) K Ground Cearance 450 mm (18 in.) L Overa Width with Tripe Semi-Grouer Shoe 700 mm (28 in.) 3.09 m (10 ft. 2 in.) 800 mm (32 in.) 3.19 m (10 ft. 6 in.) G C F B H K J L D E I A Lift Capacitie Bodface type indicate hydrauicay imited capacity; ightface type indicate tabiity-imited capacitie, in kg (b.). A ift capacitie are baed on ISO (with power boot).machine equipped with 666-kg (1,468 b.) bucket and tandard counterweight; and ituated on irm, eve, uniform upporting urface. Tota oad incude weight of cabe, hook, etc. Figure do not exceed 87 percent of hydrauic capacitie or 75 percent of weight needed to tip machine. HORIZONTAL DISTANCE FROM CENTERLINE OF ROTATION 1.5 m (5 ft.) 3.0 m (10 ft.) 4.5 m (15 ft.) 6.0 m (20 ft.) 7.5 m (25 ft.) LOAD POINT HEIGHT With 2.91-m (9 ft. 7 in.) arm and 700-mm (28 in.) tripe emi-grouer hoe 7.5 m (25 ft.) (10,200) (10,200) (10,300) (10,300) 6.0 m (20 ft.) (11,200) (11,200) (10,600) (10,600) 4.5 m (15 ft.) (19,900) (19,900) (14,300) (14,300) (11,900) (10,350) (10,750) (7,000) 3.0 m (10 ft.) (18,700) (15,400) (13,850) (9,800) (11,500) (6,750) 1.5 m (5 ft.) (22,250) (14,300) (15,650) (9,250) (11,250) (6,500) Ground Line (9,150) (9,150) (23,500) (13,800) (15,650) (8,950) (11,050) (6,300) 1.5 m ( 5 ft.) (11,950) (11,950) (19,100) (19,100) (22,700) (13,700) (15,500) (8,800) (11,000) (6,300) 3.0 m ( 10 ft.) (21,900) (21,900) (28,250) (27,850) (19,950) (13,900) (14,350) (8,900) 4.5 m ( 15 ft.) (19,650) (19,650) (13,950) (13,950) Courtey of Machine.Market

19 Lift Capacitie (continued) 245G LC Bodface type indicate hydrauicay imited capacity; ightface type indicate tabiity-imited capacitie, in kg (b.). A ift capacitie are baed on ISO (with power boot). Machine equipped with 666-kg (1,468 b.) bucket and tandard counterweight; and ituated on irm, eve, uniform upporting urface. Tota oad incude weight of cabe, hook, etc. Figure do not exceed 87 percent of hydrauic capacitie or 75 percent of weight needed to tip machine. HORIZONTAL DISTANCE FROM CENTERLINE OF ROTATION 1.5 m (5 ft.) 3.0 m (10 ft.) 4.5 m (15 ft.) 6.0 m (20 ft.) 7.5 m (25 ft.) LOAD POINT HEIGHT With 2.91-m (9 ft. 7 in.) arm and 800-mm (32 in.) tripe emi-grouer hoe 7.5 m (25 ft.) (10,200) (10,200) (10,300) (10,300) 6.0 m (20 ft.) (11,200) (11,200) (10,600) (10,600) 4.5 m (15 ft.) (19,900) (19,900) (14,300) (14,300) (11,900) (10,450) (10,750) (7,100) 3.0 m (10 ft.) (18,700) (15,600) (13,850) (9,900) (11,550) (6,850) 1.5 m (5 ft.) (22,250) (14,500) (15,650) (9,400) (11,400) (6,600) Ground Line (9,150) (9,150) (23,500) (14,000) (15,850) (9,050) (11,200) (6,400) 1.5 m ( 5 ft.) (11,950) (11,950) (19,100) (19,100) (22,700) (13,900) (15,750) (8,950) (11,150) (6,400) 3.0 m ( 10 ft.) (21,900) (21,900) (28,250) (28,200) (19,950) (14,100) (14,350) (9,050) 4.5 m ( 15 ft.) (19,650) (19,650) (13,950) (13,950) Bucket A fu ine of bucket i offered to meet a wide variety of appication. Digging force are with power boot. Bucket are equipped with John Deere TK-Serie Bucket Teeth tandard. Repaceabe cutting edge and a variety of teeth are avaiabe through John Deere Part. Optiona ide cutter add 150 mm (6 in.) to bucket width. Capacitie are SAE heaped rating. Bucket Type Bucket Width Bucket Capacity Bucket Weight mm in. m3 cu. yd. kg b. Heavy Duty , , , ,453 Ditching ,204 Bucket Seection Guide* BUCKET SIZE m3 (cu. yd.) 2.7 (3.5) 2.3 (3.0) 1.9 (2.5) 1.5 (2.0) Deere 2.91-m (9 ft. 7 in.) Arm 1.0 (1.5) 0.8 (1.0) , , Wet Sand, Grave Moit Sand Wet Cay, Granite 3,200 3, Wet Sand 2, Wet Earth Limetone 1500 Dry Cay Shae 2,600 2, Dry Sand 2, Caiche Coa Topoi Wet Peat b./cu. yd. 1,200 1,400 1,600 1,800 2,000 kg/m *Contact your John Deere deaer for optimum bucket and attachment eection. Thee recommendation are for genera condition and average ue. Doe not incude optiona equipment uch a thumb or couper. Larger bucket may be poibe when uing ight materia, for fat and eve operation, e compacted materia, and voume oading appication uch a ma-excavation appication in idea condition. Smaer bucket are recommended for advere condition uch a off-eve appication, rock, and uneven urface. Bucket capacity indicated i SAE heaped. Courtey of Machine.Market

20 Additiona equipment Key: Standard Optiona or pecia 135G 245G Engine Auto-ide ytem Automatic bet-tenion device Batterie (2 12 vot) Cooant recovery tank Dua-eement dry-type air iter Eectronic engine contro Encoed fan guard (conform to SAE J1308) Engine cooant to 37 deg. C ( 34 deg. F) Fue iter with water eparator Fu-ow oi iter Turbocharger with charge air cooer 500-hour engine-oi-change interva 70% (35 deg.) off-eve capabiity Programmabe auto hutdown Engine-oi-amping vave Severe-duty fue iter Hydrauic Sytem Reduced-drift vave for boom down, arm in Auxiiary hydrauic vave ection Spring-appied, hydrauicay reeaed automatic wing brake Auxiiary hydrauic-ow adjutment through monitor Auto power ift 5,000-hour hydrauic-oi-change interva Hydrauic-oi-amping vave Auxiiary hydrauic ine with handcontroed proportiona contro Load-owering contro device Singe-peda prope contro Contro pattern-change vave Undercarriage Panetary drive with axia piton motor Prope motor hied Spring-appied, hydrauicay reeaed automatic prope brake Track guide, front ider Track guide, front ider and center 2-peed prope with automatic hift Upper carrier roer (1) Upper carrier roer (2) Seaed and ubricated track chain Tripe emi-grouer hoe, 600 mm (24 in.) Tripe emi-grouer hoe, 700 mm (28 in.) Tripe emi-grouer hoe, 800 mm (32 in.) Rubber crawer pad, 500 mm (20 in.) Undercarriage with bade 135G 245G Uppertructure Right-hand, eft-hand, and counterweight mirror Vanda ock with ignition key: Cab door / Service door / Toobox Debri creening Remote-mounted engine oi and fue iter Front Attachment Centraized ubrication ytem Dirt ea on a bucket pin Oi-impregnated buhing Reinforced rein thrut pate Tungten carbide therma coating on arm-to-bucket joint Arm, 2.52 m (8 ft. 3 in.) Arm, 2.91 m (9 ft. 7 in.) Arm, 3.01 m (9 ft. 11 in.) Attachment quick-couper Bucket: Ditching / Heavy duty / Heavy-duty high capacity / Side cutter and teeth Materia camp Operator Station Meet ISO for ROPS Adjutabe independent-contro poition (ever-to-eat, eat-to-peda) AM/FM radio Auto cimate contro/air conditioner/ heater/preurizer Buit-in Operator Manua torage compartment and manua Ce-phone power outet, 12 vot, 60 watt, 5 amp Coat hook Deuxe mechanica-upenion coth eat with 100-mm (4 in.) adjutabe armret Deuxe air-upenion heated coth eat with 100-mm (4 in.) adjutabe armret Foor mat Front windhied wiper with intermittent peed Gauge (iuminated): Diee Exhaut Fuid (DEF) / Engine cooant / Fue Horn, eectric Hour meter, eectric Hydrauic hutoff ever, a contro Hydrauic warm-up contro See your John Deere deaer for further information. 135G 245G Operator Station (continued) Interior ight Large cup hoder Machine Information Center (MIC) Mode eector (iuminated): Power mode (3) / Trave mode (2 with automatic hift) / Work mode (1) Mutifunction, coor LCD monitor with: Diagnotic capabiity / Mutipeanguage capabiitie / Maintenance tracking / Cock / Sytem monitoring with aarm feature: Auto-ide indicator, engine air ceaner retriction indicator ight, engine check, engine cooant temperature indicator ight with audibe aarm, engine oi preure indicator ight with audibe aarm, ow-aternator charge indicator ight, ow-fue indicator ight, ow DEF indication with audibe aarm, faut code aert indicator, fue-rate dipay, wiper-mode indicator, work-ight-on indicator, and workmode indicator Motion aarm with cance witch (conform to SAE J994) Power-boot witch on right conoe ever SAE 2-ever contro pattern Seat bet, 51 mm (2 in.), retractabe Tinted ga Tranparent tinted overhead hatch Hot/cod beverage compartment Hydrauic oi iter retriction indicator ight Protection creen for cab front, rear, and ide Seat bet, 76 mm (3 in.), non-retractabe Window vanda-protection cover Eectrica 50-amp aternator Bade-type muti-fued circuit Poitive-termina battery cover JDLink wiree communication ytem (avaiabe in peciic countrie; ee your deaer for detai) Rearview camera Light Work ight: Haogen / 1 mounted on boom / 1 mounted on frame 2 ight mounted on cab / 1 mounted on right ide of boom Net engine power i with tandard equipment incuding air ceaner, exhaut ytem, aternator, and cooing fan, at tet condition peciied per ISO No derating i required up to 3050-m (10,000 ft.) atitude. Speciication and deign ubject to change without notice. Wherever appicabe, peciication are in accordance with SAE tandard. Except where otherwie noted, thee peciication are baed on unit with fu fue tank and 79-kg (175 b.) operator; a 135G unit with 914-mm (36 in.), 0.62-m3 (0.81 cu. yd.), 448-kg (987 b.) heavy-duty bucket; 3.01-m (9 ft. 11 in.) arm; 3650-kg (8,047 b.) counterweight; and 700-mm (28 in.) tripe-emi grouer hoe; and a 245G LC unit with 1219-mm (48 in.), 1.09-m3 (1.43 cu. yd.), 871-kg (1,921 b.) heavy-duty bucket; 2.91-m (9 ft. 7 in.) arm; 7280-kg (16,050 b.) counterweight; and 800-mm (32 in.) tripe emi-grouer hoe. JohnDeere.com Courtey of Machine.Market Powered by TCPDF (