ZX210F-3. Road Builder. 122 kw (164 hp) Live Heel Fixed Heel Butt & Top ZX210F

Transcription

1 ZAXIS DASH-3 Foresters Road Builder Processor Live Heel Fixed Heel Butt & Top Power Clam Models 122 kw (164 hp) ZX210F

2 ZAXIS DASH-3 Foresters EXTREME Productivity. tough machines for tough jobs. Hitachi has been in the woods helping loggers for decades. And our tough Zaxis Dash-3 Foresters are equipped to stand the test of time. Swing torque. Tractive effort. Horsepower. Hydraulic flow. Next-sizeup components. New stronger structures. Improved machine protection. Seamless integration of attachment and carrier with installation of Waratah processing heads and a variety of makes and models for grapples. Add it all up, and you get efficient, reliable and durable Foresters to take on the wildest of woods. moving ahead, never behind. n Attachments Integration. Purpose-built processing fronts and integrated attachments are delivered straight from the factory. n Ease of Service. Remote-mounted engine and hydraulic oil filters and dynamic test ports. n Robust Booms and Arms. New heavy-duty booms and arms are ready to take on all applications, whether it be building roads or processing or handling trees. n Cooling Package Design. Laid out side by side with swingout fuel cooler and condenser to make servicing the system a breeze. n Debris Management. External screening, sealed cooler compartment, and optional automatic reversing fan help eliminate the downtime associated with cooling system servicing. 2

3 n Improved Component Protection. Three-piece heavy-duty engine enclosure, new under-house protection system, new hydraulic filter guard and muffler protection, and heavier right rear door all work to keep the machine s valuable components safe from damage. n Robust Upper Frame. Strong boom-tower arrangement, thick base plates, after-welding machining in critical areas, and large-diameter swing bearings make these machines extremely durable. n Durable Undercarriage. Robust structures; next-size-up components and drive systems; and heavy-duty track chains deliver on both productivity and durability. n Tier-3-Compliant Isuzu Engines. Provide the horsepower required to get the job done while delivering excellent fuel efficiency. 3

4 ZAXIS DASH-3 Foresters ROAD BUILDER Engine Manufacturer and Model Isuzu AI-4HK1X Non-Road Emissions Standards Certified to EPA Tier-3 emissions Net Rated Power (ISO 9249) 164 kw (122 2,000 rpm Cylinders 4 Displacement 5.1 L (317 cu. in.) Off-Level Capacity 70% (35 deg.) Aspiration Turbocharged, air-to-air charge-air cooler Cooling Direct drive with mechanically reversing option, high efficiency, low noise, suction type Engine Coolant Rating -37 C (-34 F) Powertrain 2-speed propel with automatic shift Maximum Travel Speed Low 3.2 km/h (2.0 mph) High 5.1 km/h (3.2 mph) Controls Pilot levers, low-effort, hydraulic pilot controls with shutoff lever Hydraulics Open center, load sensing Main Pumps 2 variable-displacement axial-piston pumps Maximum Rated Flow 212 L/m (56 gpm) x 2 Pilot Pump One gear Maximum Rated Flow 30 L/m (7.9 gpm) Pressure Setting 3999 kpa (580 psi) System Operating Pressure Circuits Implement Travel Swing Power Boost kpa (5,270 psi) Auxiliary Hydraulic-Flow Adjustable Through Monitor Cylinders Heat-treated, chrome-plated, polished cylinder rods, hardened steel (replaceable bushings) pivot pins Bore Rod Diameter Stroke Boom (2) 120 mm (4.7 in.) 85 mm (3.35 in.) 1260 mm (49.6 in.) Arm (1) 135 mm (5.3 in.) 95 mm (3.74 in.) 1475 mm (58.1 in.) Bucket (1) 115 mm (4.5 in.) 80 mm (3.15 in.) 1060 mm (41.7 in.) Electrical Voltage 24 volt Number of Batteries (12 volt) 2 Battery Capacity 440 minutes Alternator Rating 80 amp Work Lights None Undercarriage Rollers (each side) Carrier 2 Track 8 Shoes (each side) 48 Drawbar Pull kg (49,900 lb.) Track Adjustment Hydraulic Guides Center Chain Sealed and lubricated 4

5 ROAD BUILDER Upperstructure Counterweight, Standard 4000 kg (8,818 lb.) Ground Pressure 700-mm (28 in.) Double-Grouser Shoes 47 kpa (6.85 psi) Swing Mechanism Swing Speed 12.6 rpm Swing Torque Nm (54,857 lb.-ft.) Serviceability Side by side coolers with external debris protection, Centralized Lube Banks, and O Ring Face Seal Connectors on most hydraulic hoses, Diagnostics Machine Information Center (MIC), Computerized In-Cab Monitor Information, and Fluid Sampling Ports. Fluid Change Interval Engine Oil Hydraulic Oil 5,000 hours Filters Vertically mounted (except Return) Engine Oil Filter, Remote Mounted Fuel Filter, Remote Mounted Hydraulic Filter 2,000 hours Return Oil Filter, Filtration 10 microns Sight Gauges: Hydraulic Reservoir, Engine-Oil Sampling Valve Refill Capacities Fuel Tank 1049 L (277 gal.) Cooling System 26 L (6.9 gal.) Engine Oil with Filter 23 L (6 gal.) Hydraulic Tank 136 L (36 gal.) Hydraulic System 244 L (64.5 gal.) Gearbox Swing 6 L (6.5 qt.) Travel (each) 7 L (7.5 qt.) Pump Drive 1 L (1.1 qt.) 5

6 ZAXIS DASH-3 Foresters ROAD BUILDER Operating Weights With 840-kg (1818 lb.) Full Fuel Tank; 79-kg (175 lb.) Operator; 4000-kg (8,818 lb.) Counterweight; 2.91-m (9 ft. 7 in. ) Arm; 0.91-m 3 (1.19 cu.-yd.), 1065-mm (42 in.), 830-kg (1,830 lb.) Bucket and 700-mm (28 in.) Double-Grouser Shoes. SAE Operating Weight kg (58,775 lb.) Operating Dimensions Arm Length 2.91 m (9 ft. 7 in.) Arm Digging Force w/ 1065-mm (42 in.) Heavy Duty Bucket w/ Power Boost 102 kn (22,924 lb.) Bucket Digging Force w/ 1065-mm (42 in.) 0.91-m 3 (1.19 cu. yd.) Heavy Duty Bucket w/ Power Boost kn (29,099 lb.) Lifting Capacity Over Front at Ground Level 6.1 m (20 ft.) Reach with Power Boost, with attachment 6469 kg (14,248 lb.) A Maximum Reach 9.87 m (32 ft. 5 in.) A Maximum Reach at Ground Level 9.64 m (31 ft. 8 in.) B Maximum Depth 6.17 m (20 ft. 3 in.) B Maximum Digging Depth at 2.44-m (8 ft.) Flat Bottom 5.97 m (19 ft. 6 in.) C Maximum Height m (33 ft. 11 in.) D Maximum Dumping Height 7.72 m (25 ft. 4 in.) E Minimum Swing Radius 3.04 m (9 ft. 11 in.) F Maximum Vertical Wall 5.36 m (17 ft. 7 in.) E CENTERLINE OF SWING C D B' B F GROUND LINE A A' Machine not exactly as shown. Illustration for dimensioning purposes only. 6

7 ROAD BUILDER Machine Dimensions A Height 2.93 m (9 ft. 7 in.) B Overall Length 9.86 m (32 ft. 4 in.) C Rear-End Length/Swing Radius 3.10 m (10 ft. 2 in.) D Distance Between Idler/Sprocket Centerline 3.66 m (12 ft.) E Undercarriage Length 4.45 m (14 ft. 7 in.) F Counterweight Clearance 1.33 m (4 ft. 4 in.) G Maximum Shipping Width 3.36 m (11 ft.); 3.49 m (11 ft. 6 in.) H Cab Height 3.68 m (12 ft. 1 in.) I Track Width w/ Double-Grouser Shoes 700 mm (28 in.) J Gauge Width 2.62 m (8 ft. 7 in.); 2.79 m (9 ft. 2 in.) K Ground Clearance 0.66 m (2 ft. 2 in.) L Undercarriage Width 3.33 m (10 ft. 11 in.) G C H A F K I J L B D E Lift Charts Boldface type indicates hydraulically limited capacity; lightface type indicates stability-limited capacities, in kg (lb.). Ratings at bucket lift hook; machine equipped with standard gauge and situated on firm, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do not exceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine. All lift capacities are based on ISO (with power boost). Load Point Height 1.5 m (5 ft.) 3.1 m (10 ft.) 4.6 m (15 ft.) 6.1 m (20 ft.) 7.6 m (25 ft.) 9.1 m (30 ft.) Horizontal Distance from Centerline of Rotation Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side 6.1 m (20 ft.) 3651 (8,048) 3651 (8,048) 4.6 m (15 ft.) 4069 (8,970) 4069 (8,970) 3889 (8,574) 3306 (7,288) 3.1 m ( 10 ft.) 6281 (13,847) 6281 (13,847) 4879 (10,757) 4636 (10,221) 4232 (9,329) 3199 (7,052) 1.5 m (5 ft.) 8214 (18,108) 6713 (14,799) 5791 (12,766) 4366 (9,625) 4676 (10,309) 3067 (6,762) Ground Line 9212 (20,308) 6386 (14,079) 6463 (14,248) 4163 (9,178) 4805 (10,593) 2957 (6,519) 1.5 m ( 5 ft.) 6543 (14,425) 6543 (14,425) 9259 (20,412) 6297 (13,883) 6691 (14,751) 4064 (8,960) 4742 (10,455) 2900 (6,393) 3.1 m ( 10 ft.) (23,940) 4.6 m ( 15 ft.) 9500 (20,943) (23,940) 9500 (20,943) 8605 (18,971) 7089 (15,628) 6340 (13,978) 6502 (14,334) 6363 (14,028) 5102 (11,249) 4067 (8,966) 4193 (9,244) 4679 (10,316) 2926 (6,451) 7

8 ZAXIS DASH-3 Foresters PROCESSOR Engine Manufacturer and Model Isuzu AI-4HK1X Non-Road Emissions Standards Certified to EPA Tier-3 emissions Net Rated Power (ISO 9249) 164 kw (122 2,000 rpm Cylinders 4 Displacement 5.1 L (317 cu. in.) Off-Level Capacity 70% (35 deg.) Aspiration Turbocharged, air-to-air charge-air cooler Cooling Direct drive with mechanically reversing option, high efficiency, low noise, suction type Engine Coolant Rating -37 C (-34 F) Powertrain 2-speed propel with automatic shift Maximum Travel Speed Low 3.2 km/h (2.0 mph) High 5.1 km/h (3.2 mph) Controls Pilot levers, low-effort, hydraulic pilot controls with shutoff lever Hydraulics Open center, load sensing Main Pumps 2 variable-displacement axial-piston pumps Maximum Rated Flow 212 L/m (56 gpm) x 2 Pilot Pump One gear Maximum Rated Flow 30 L/m (7.9 gpm) Pressure Setting 3999 kpa (580 psi) System Operating Pressure Circuits Implement Travel Swing Power Boost kpa (5,270 psi) Auxiliary Hydraulic-Flow Adjustable Through Monitor Cylinders Heat treated, chrome-plated, polished cylinder rods, hardened steel (replaceable bushings) pivot pins Bore Rod Diameter Stroke Boom (2) 120 mm (4.7 in.) 85 mm (3.35 in.) 1260 mm (49.6 in.) Arm (1) 135 mm (5.3 in.) 95 mm (3.74 in.) 1475 mm (58.1 in.) Electrical Voltage 24 volt Number of Batteries (12 volt) 2 Battery Capacity 440 minutes Alternator Rating 80 amp Work Lights None Undercarriage Rollers (each side) Carrier 2 Track 8 Shoes (each side) 48 Drawbar Pull kg (49,900 lb.) Track Adjustment Hydraulic Guides Center Chain Sealed and lubricated 8

9 PROCESSOR Upperstructure Counterweight, Standard 4000 kg (8,818 lb.) Ground Pressure 700-mm (28 in.) Double-Grouser Shoes 49 kpa (7.16 psi) Swing Mechanism Swing Speed 12.6 rpm Swing Torque Nm (54,857 lb.-ft.) Serviceability Side by side coolers with external debris protection, Centralized Lube Banks, and O Ring Face Seal Connectors on most hydraulic hoses, Diagnostics Machine Information Center (MIC), Computerized In-Cab Monitor Information, and Fluid Sampling Ports. Fluid Change Interval Engine Oil Hydraulic Oil 5,000 hours Filters Vertically mounted (except Return) Engine Oil Filter, Remote Mounted Fuel Filter, Remote Mounted Hydraulic Filter 2,000 hours Return Oil Filter, Filtration 10 microns Sight Gauges: Hydraulic Reservoir, Engine-Oil Sampling Valve Refill Capacities Fuel Tank 1049 L (277 gal.) Cooling System 26 L (6.9 gal.) Engine Oil with Filter 23 L (6 gal.) Hydraulic Tank 136 L (36 gal.) Hydraulic System 244 L (64.5 gal.) Gearbox Swing 6 L (6.5 qt.) Travel (each) 7 L (7.5 qt.) Pump Drive 1 L (1.1 qt.) 9

10 ZAXIS DASH-3 Foresters PROCESSOR Operating Weights With 840-kg (1818 lb.) Full Fuel Tank; 79-kg (175 lb.) Operator; 4000-kg (8,818 lb.) Counterweight; 2120-kg (4,673 lb.) Processor and 700-mm (28 in.) Double-Grouser Shoes SAE Operating Weight kg (61,430 lb.) Operating Dimensions Lifting Capacity Over Front at Ground Level 6.1 m (20 ft.) Reach with Power Boost, with attachment 5806 kg (12,800 lb.) A Maximum Reach 8.76 m (28 ft. 9 in.) A Maximum Reach at Ground Level 8.51 m (27 ft. 11 in.) B Maximum Depth 4.80 m (15 ft. 9 in.) C Maximum Height 9.64 m (31 ft. 7 in.) D Maximum Level Log Height 7.36 m (24 ft. 2 in.) E Minimum Swing Radius 3.10 m (10 ft. 2 in.) CENTERLINE OF SWING C D GROUND LINE B E A' A 10

11 PROCESSOR Machine Dimensions A Height 3.61 m (11 ft. 10 in.) B Overall Length 9.88 m (32 ft. 5 in.) C Rear-End Length/Swing Radius 3.10 m (10 ft. 2 in.) D Distance Between Idler/Sprocket Centerline 3.66 m (12 ft.) E Undercarriage Length 4.45 m (14 ft. 7 in.) F Counterweight Clearance 1.33 m (4 ft. 4 in.) G Maximum Shipping Width 3.36 m (11 ft.); 3.49 m (11 ft. 6 in.) H Cab Height 3.68 m (12 ft. 1 in.) I Track Width w/ Double-Grouser Shoes 700 mm (28 in.) J Gauge Width 2.62 m (8 ft. 7 in.); 2.79 m (9 ft. 2 in.) K Ground Clearance 0.66 m (2 ft. 2 in.) L Undercarriage Width 3.33 m (10 ft. 11 in.) G C H A F K I L F J B D E Lift Charts Boldface type indicates hydraulically limited capacity; lightface type indicates stability-limited capacities, in kg (lb.). Ratings at bucket lift hook; machine equipped with standard gauge and situated on firm, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do not exceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine. All lift capacities are based on ISO (with power boost). Load Point Height 1.5 m (5 ft.) 3.1 m (10 ft.) 4.6 m (15 ft.) 6.1 m (20 ft.) 7.6 m (25 ft.) 9.1 m (30 ft.) Horizontal Distance from Centerline of Rotation Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side 9.2 m (30 ft.) 3221 (7,100) 3221 (7,100) 7.6 m (25 ft.) 2948 (6,500) 2948 (6,500) 6.1 m (20 ft.) 3175 (7,000) 3175 (7,000) 3084 (6,800) 3084 (6,800) 2223 (4,900) 2223 (4,900) 4.6 m (15 ft.) 6078 (13,400) 6078 (13,400) 4445 (9,800) 4445 (9,800) 3629 (8,000) 3629 (8,000) 3221 (7,100) 3221 (7,100) 3.1 m ( 10 ft.) (24,400) (24,400) 6260 (13,800) 6260 (13,800) 4491 (9,900) 4491 (9,900) 3583 (7,900) 3357 (7,400) 1.5 m (5 ft.) (31,600) (31,600) 7847 (17,300) 7847 (17,300) 5307 (11,700) 4944 (10,900) 3992 (8,800) 3221 (7,100) Ground Line (31,900) (31,900) 8664 (19,100) 7893 (17,400) 5806 (12,800) 4763 (10,500) 4218 (9,300) 3130 (6,900) 1.5 m ( 5 ft.) (52,800) (52,800) (29,800) (29,800) 8573 (18,900) 3.1 m ( 10 ft.) (25,700) (25,700) (16,900) 4.6 m ( 15 ft.) 5534 (12,200) 7802 (17,200) 7666 (16,900) 5534 (12,200) 5851 (12,900) 5216 (11,500) 4672 (10,300) 4717 (10,400) 4128 (9,100) 3084 (6,800) 11

12 ZAXIS DASH-3 Foresters LIVE HEEL Engine Manufacturer and Model Isuzu AI-4HK1X Non-Road Emissions Standards Certified to EPA Tier-3 emissions Net Rated Power (ISO 9249) 164 kw (122 2,000 rpm Cylinders 4 Displacement 5.1 L (317 cu. in.) Off-Level Capacity 70% (35 deg.) Aspiration Turbocharged, air-to-air charge-air cooler Cooling Direct drive with mechanically reversing option, high efficiency, low noise, suction type Engine Coolant Rating -37 C (-34 F) Powertrain 2-speed propel with automatic shift Maximum Travel Speed Low 3.2 km/h (2.0 mph) High 5.1 km/h (3.2 mph) Controls Pilot levers, low-effort, hydraulic pilot controls with shutoff lever Hydraulics Open center, load sensing Main Pumps 2 variable-displacement axial-piston pumps Maximum Rated Flow 212 L/m (56 gpm) x 2 Pilot Pump One gear Maximum Rated Flow 30 L/m (7.9 gpm) Pressure Setting 3999 kpa (580 psi) System Operating Pressure Circuits Implement Travel Swing Power Boost kpa (5,270 psi) Auxiliary Hydraulic-Flow Adjustable Through Monitor Cylinders Heat treated, chrome-plated, polished cylinder rods, hardened steel (replaceable bushings) pivot pins Bore Rod Diameter Stroke Boom (2) 135 mm (5.3 in.) 95 mm (3.7 in.) 1160 mm (45.7 in.) Arm (1) 145 mm (5.7 in.) 100 mm (3.9 in.) 1555 mm (61.2 in.) Heel (1) 115 mm (4.5 in.) 80 mm (3.2 in.) 1060 mm (41.7 in.) Electrical Voltage 24 volt Number of Batteries (12 volt) 2 Battery Capacity 440 minutes Alternator Rating 80 amp Work Lights None Undercarriage Rollers (each side) Carrier 2 Track 8 Shoes (each side) 48 Drawbar Pull kg (49,900 lb.) Track Adjustment Hydraulic Guides Center Chain Sealed and lubricated 12

13 LIVE HEEL Upperstructure Counterweight, Standard 5203 kg (11,490 lb.) Ground Pressure 700-mm (28 in.) Double-Grouser Shoes 54 kpa (7.77 psi) Swing Mechanism Swing Speed 12.6 rpm Swing Torque Nm (54,857 lb.-ft.) Serviceability Side by side coolers with external debris protection, Centralized Lube Banks, and O Ring Face Seal Connectors on most hydraulic hoses, Diagnostics Machine Information Center (MIC), Computerized In-Cab Monitor Information, and Fluid Sampling Ports. Fluid Change Interval Engine Oil Hydraulic Oil 5,000 hours Filters Vertically mounted (except Return) Engine Oil Filter, Remote Mounted Fuel Filter, Remote Mounted Hydraulic Filter 2,000 hours Return Oil Filter, Filtration 10 microns Sight Gauges: Hydraulic Reservoir, Engine-Oil Sampling Valve Refill Capacities Fuel Tank 1049 L (277 gal.) Cooling System 26 L (6.9 gal.) Engine Oil with Filter 23 L (6 gal.) Hydraulic Tank 136 L (36 gal.) Hydraulic System 257 L (68 gal.) Gearbox Swing 6 L (6.5 qt.) Travel (each) 7 L (7.5 qt.) Pump Drive 1 L (1.1 qt.) 13

14 ZAXIS DASH-3 Foresters LIVE HEEL Operating Weights With 840-kg (1818 lb.) Full Fuel Tank; 79-kg (175 lb.) Operator; 5203-kg (11,490 lb.) Counterweight; 816-kg (1,800 lb.) Grapple and 700-mm (28 in.) Double-Grouser Shoes SAE Operating Weight kg (66,690 lb.) Operating Dimensions Lifting Capacity Over Front at Ground Level 6.1 m (20 ft.) Reach with Power Boost, with attachment 8822 kg (19,450 lb.) A Maximum Reach m (36 ft.) A Maximum Reach at Ground Level m (35 ft. 4 in.) B Maximum Depth 4.32 m (14 ft. 2 in.) C Maximum Height m (41 ft. 6 in.) D Maximum Level Log Height 8.12 m (26 ft. 8 in.) E Minimum Swing Radius 4.23 m (13 ft. 11 in.) CENTERLINE OF SWING C D GROUND LINE B A' A E 14

15 LIVE HEEL Machine Dimensions B Overall Length m (44 ft. 4 in.) C Rear-End Length/Swing Radius 3.10 m (10 ft. 2 in.) D Distance Between Idler/Sprocket Centerline 3.66 m (12 ft.) E Undercarriage Length 4.45 m (14 ft. 7 in.) F Counterweight Clearance 1.38 m (4 ft. 6 in.) G Maximum Shipping Width / with 48 in. Side Entry Cab 3.50 m (11 ft. 6 in.) Maximum Shipping Width / with 48 in. Rear Entry Cab 3.54 m (11 ft. 7 in.) H Cab Height (Transport) / with 48 in. Side Entry Cab 3.33 m (10 ft. 11 in.) Cab Height (Transport) / with 48 in. Rear Entry Cab 3.43 m (11 ft. 3 in.) I Track Width w/ Double-Grouser Shoes 0.70 m (28 in.) J Gauge Width 2.62 m (8 ft. 7 in.); 2.79 m (9 ft. 2 in.) K Ground Clearance 0.71 m (2 ft. 4 in.) L Undercarriage Width 3.33 m (10 ft. 11 in.); 3.49 m (11 ft. 6 in.) G C H F K I J D E L B Lift Charts Boldface type indicates hydraulically limited capacity; lightface type indicates stability-limited capacities, in kg (lb.). Ratings at bucket lift hook; machine equipped with standard gauge and situated on firm, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do not exceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine. All lift capacities are based on ISO (with power boost). Load Point Height 4.6 m (15 ft.) 6.1 m (20 ft.) 7.6 m (25 ft.) 9.1 m (30 ft.) 10.7 m (35 ft.) 11.7 m (36 ft.) Horizontal Distance from Centerline of Rotation Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side 10.7 m (35 ft.) 8260 (18,210) 8260 (18,210) 7362 (16,230) 7135 (15,730) 9.1 m (30 ft.) 6486 (14,300) 6486 (14,300) 5924 (13,060) 4867 (10,730) 7.6 m (25 ft.) 6355 (14,010) 6355 (14,010) 5684 (12,530) 5103 (11,250) 4885 (10,770) 3642 (8,030) 6.1 m (20 ft.) 6641 (14,640) 6641 (14,640) 5783 (12,750) 5144 (11,340) 4912 (10,830) 3665 (8,080) 4.6 m (15 ft.) 7616 (16,790) 7616 (16,790) 7262 (16,010) 7262 (16,010) 6078 (13,400) 5067 (11,170) 4740 (10,450) 3502 (7,720) 3543 (7,810) 2554 (5,630) 3.1 m ( 10 ft.) 9816 (21,640) 9816 (21,640) 8051 (17,750) 7362 (16,230) 6423 (14,160) 4926 (10,860) 4731 (10,430) 3497 (7,710) 3529 (7,780) 2545 (5,610) 1.5 m (5 ft.) (25,400) Ground Line (27,140) 1.5 m ( 5 ft.) (25,320) 3.1 m ( 10 ft.) 9662 (21,300) (24,770) (23,340) (22,850) 9662 (21,300) 8700 (19,180) 8822 (19,450) 8206 (18,090) 6568 (14,480) 6994 (15,420) 6691 (14,750) 6486 (14,300) 6437 (14,190) 6387 (14,080) 6237 (13,750) 6078 (13,400) 4785 (10,550) 4749 (10,470) 4609 (10,160) 4482 (9,880) 4450 (9,810) 4658 (10,270) 4550 (10,030) 4318 (9,520) 2808 (6,190) 3429 (7,560) 3325 (7,330) 3257 (7,180) 2808 (6,190) 3488 (7,690) 3230 (7,120) 2504 (5,520) 2477 (5,460) 3307 (7,290) 2359 (5,200) 15

16 ZAXIS DASH-3 Foresters FIXED HEEL Engine Manufacturer and Model Isuzu AI-4HK1X Non-Road Emissions Standards Certified to EPA Tier-3 emissions Net Rated Power (ISO 9249) 164 kw (122 2,000 rpm Cylinders 4 Displacement 5.1 L (317 cu. in.) Off-Level Capacity 70% (35 deg.) Aspiration Turbocharged, air-to-air charge-air cooler Cooling Direct drive with mechanically reversing option, high efficiency, low noise, suction type Engine Coolant Rating -37 C (-34 F) Powertrain 2-speed propel with automatic shift Maximum Travel Speed Low 3.2 km/h (2.0 mph) High 5.1 km/h (3.2 mph) Controls Pilot levers, low-effort, hydraulic pilot controls with shutoff lever Hydraulics Open center, load sensing Main Pumps 2 variable-displacement axial-piston pumps Maximum Rated Flow 212 L/m (56 gpm) x 2 Pilot Pump One gear Maximum Rated Flow 30 L/m (7.9 gpm) Pressure Setting 3999 kpa (580 psi) System Operating Pressure Circuits Implement Travel Swing Power Boost kpa (5,270 psi) Auxiliary Hydraulic-Flow Adjustable Through Monitor Cylinders Heat treated, chrome-plated, polished cylinder rods, hardened steel (replaceable bushings) pivot pins Bore Rod Diameter Stroke Boom (2) 135 mm (5.3 in.) 95 mm (3.7 in.) 1160 mm (45.7 in.) Arm (1) 145 mm (5.7 in.) 100 mm (3.9 in.) 1555 mm (61.2 in.) Electrical Voltage 24 volt Number of Batteries (12 volt) 2 Battery Capacity 440 minutes Alternator Rating 80 amp Work Lights None Undercarriage Rollers (each side) Carrier 2 Track 8 Shoes (each side) 48 Drawbar Pull kg (49,900 lb.) Track Adjustment Hydraulic Guides Center Chain Sealed and lubricated 16

17 FIXED HEEL Upperstructure Counterweight, Standard 5203 kg (11,490 lb.) Ground Pressure 700-mm (28 in.) Double-Grouser Shoes 52 kpa (7.61 psi) Swing Mechanism Swing Speed 12.6 rpm Swing Torque Nm (54,857 lb.-ft.) Serviceability Side by side coolers with external debris protection, Centralized Lube Banks, and O Ring Face Seal Connectors on most hydraulic hoses, Diagnostics Machine Information Center (MIC), Computerized In-Cab Monitor Information, and Fluid Sampling Ports. Fluid Change Interval Engine Oil Hydraulic Oil 5,000 hours Filters Vertically mounted (except Return) Engine Oil Filter, Remote Mounted Fuel Filter, Remote Mounted Hydraulic Filter 2,000 hours Return Oil Filter, Filtration 10 microns Sight Gauges: Hydraulic Reservoir, Engine-Oil Sampling Valve Refill Capacities Fuel Tank 1049 L (277 gal.) Cooling System 26 L (6.9 gal.) Engine Oil with Filter 23 L (6 gal.) Hydraulic Tank 136 L (36 gal.) Hydraulic System 248 L (65.5 gal.) Gearbox Swing 6 L (6.5 qt.) Travel (each) 7 L (7.5 qt.) Pump Drive 1 L (1.1 qt.) 17

18 ZAXIS DASH-3 Foresters FIXED HEEL Operating Weights With 840-kg (1818 lb.) Full Fuel Tank; 79-kg (175 lb.) Operator; 5203-kg (11,490 lb.) Counterweight; 703-kg (1,550 lb.) Grapple and 700-mm (28 in.) Double-Grouser Shoes SAE Operating Weight kg (65,342 lb.) Operating Dimensions Lifting Capacity Over Front at Ground Level 6.1 m (20 ft.) Reach with Power Boost, with attachment 8977 kg (19,790 lb.) A Maximum Reach m (33 ft. 10 in.) A Maximum Reach at Ground Level m (33 ft. 2 in.) B Maximum Depth 3.82 m (12 ft. 6 in.) C Maximum Height m (38 ft. 9 in.) D Maximum Level Log Height 7.74 m (25 ft. 5 in.) E Minimum Swing Radius 4.88 m (16 ft.) CENTERLINE OF SWING C D GROUND LINE B A' A E 18

19 FIXED HEEL Machine Dimensions A Height 4.71 m (15 ft. 5 in.) B Overall Length m (42 ft. 7 in.) C Rear-End Length/Swing Radius 3.10 m (10 ft. 2 in.) D Distance Between Idler/Sprocket Centerline 3.66 m (12 ft.) E Undercarriage Length 4.45 m (14 ft. 7 in.) F Counterweight Clearance 1.33 m (4 ft. 4 in.) G Maximum Shipping Width / with 48 in. Side Entry Cab 3.41 m (11 ft. 2 in.) Maximum Shipping Width / with 48 in. Rear Entry Cab 3.45 m (11 ft. 4 in.) H Cab Height (Transport) / with 48 in. Side Entry Cab 3.29 m (10 ft. 9 in.) Cab Height (Transport) / with 48 in. Rear Entry Cab 3.38 m (11 ft. 1 in.) I Track Width w/ Double-Grouser Shoes 0.70 m (28 in.) J Gauge Width 2.62 m (8 ft. 7 in.); 2.79 m (9 ft. 2 in.) K Ground Clearance 0.66 m (2 ft. 2 in.) L Undercarriage Width 3.33 m (10 ft. 11 in.); 3.49 m (11 ft. 6 in.) G C A H F K I J L B D E Lift Charts Boldface type indicates hydraulically limited capacity; lightface type indicates stability-limited capacities, in kg (lb.). Ratings at bucket lift hook; machine equipped with standard gauge and situated on firm, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do not exceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine. All lift capacities are based on ISO (with power boost). Load Point Height 3.1 m (10 ft.) 4.6 m (15 ft.) 6.1 m (20 ft.) 7.6 m (25 ft.) 9.1 m (30 ft.) 10.3 m (33.8 ft.) Horizontal Distance from Centerline of Rotation Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side 10.7 m (35 ft.) 7602 (16,760) 7602 (16,760) 9.1 m (30 ft.) 7013 (15,460) 7013 (15,460) 7.6 m (25 ft.) 6763 (14,910) 6763 (14,910) 6128 (13,510) 5039 (11,110) 6.1 m (20 ft.) 6963 (15,350) 6963 (15,350) 6155 (13,570) 5012 (11,050) 5049 (11,130) 3524 (7,770) 4.6 m (15 ft.) 9086 (20,030) 9086 (20,030) 7525 (16,590) 7226 (15,930) 6391 (14,090) 4894 (10,790) 5008 (11,040) 3484 (7,680) 3.1 m ( 10 ft.) (23,790) (23,790) 8274 (18,240) 6877 (15,160) 6700 (14,770) 4713 (10,390) 4917 (10,840) 3402 (7,500) 1.5 m (5 ft.) (27,030) Ground Line (27,760) 1.5 m ( 5 ft.) (25,290) 3.1 m ( 10 ft.) 8959 (19,750) (22,710) 9702 (21,390) 9417 (20,760) 8959 (19,750) 8886 (19,590) 8977 (19,790) 8269 (18,230) 6554 (14,450) 6500 (14,330) 6192 (13,650) 6015 (13,260) 5978 (13,180) 6518 (14,370) 6341 (13,980) 6065 (13,370) 4500 (9,920) 4518 (9,960) 4355 (9,600) 4255 (9,380) 4250 (9,370) 4813 (10,610) 4731 (10,430) 4101 (9,040) 3302 (7,280) 3225 (7,110) 3193 (7,040) 3928 (8,660) 2658 (5,860) 19

20 ZAXIS DASH-3 Foresters BUTT & TOP Engine Manufacturer and Model Isuzu AI-4HK1X Non-Road Emissions Standards Certified to EPA Tier-3 emissions Net Rated Power (ISO 9249) 164 kw (122 2,000 rpm Cylinders 4 Displacement 5.1 L (317 cu. in.) Off-Level Capacity 70% (35 deg.) Aspiration Turbocharged, air-to-air charge-air cooler Cooling Direct drive with mechanically reversing option, high efficiency, low noise, suction type Engine Coolant Rating -37 C (-34 F) Powertrain 2-speed propel with automatic shift Maximum Travel Speed Low 3.2 km/h (2.0 mph) High 5.1 km/h (3.2 mph) Controls Pilot levers, low-effort, hydraulic pilot controls with shutoff lever Hydraulics Open center, load sensing Main Pumps 2 variable-displacement axial-piston pumps Maximum Rated Flow 212 L/m (56 gpm) x 2 Pilot Pump One gear Maximum Rated Flow 30 L/m (7.9 gpm) Pressure Setting 3999 kpa (580 psi) System Operating Pressure Circuits Implement Travel Swing Power Boost kpa (5,270 psi) Auxiliary Hydraulic-Flow Adjustable Through Monitor Cylinders Heat treated, chrome-plated, polished cylinder rods, hardened steel (replaceable bushings) pivot pins Bore Rod Diameter Stroke Boom (2) 135 mm (5.3 in.) 95 mm (3.7 in.) 1160 mm (45.7 in.) Arm (1) 145 mm (5.7 in.) 100 mm (3.9 in.) 1555 mm (61.2 in.) Tool (1) 115 mm (4.5 in.) 80 mm (3.2 in.) 1060 mm (41.7 in.) Electrical Voltage 24 volt Number of Batteries (12 volt) 2 Battery Capacity 440 minutes Alternator Rating 80 amp Work Lights None Undercarriage Rollers (each side) Carrier 2 Track 8 Shoes (each side) 48 Drawbar Pull kg (49,900 lb.) Track Adjustment Hydraulic Guides Center Chain Sealed and lubricated 20

21 BUTT & TOP Upperstructure Counterweight, Standard 5203 kg (11,490 lb.) Ground Pressure 700-mm (28 in.) Double-Grouser Shoes 54 kpa (7.89 psi) Swing Mechanism Swing Speed 12.6 rpm Swing Torque Nm (54,857 lb.-ft.) Serviceability Side by side coolers with external debris protection, Centralized Lube Banks, and O Ring Face Seal Connectors on most hydraulic hoses, Diagnostics Machine Information Center (MIC), Computerized In-Cab Monitor Information, and Fluid Sampling Ports. Fluid Change Interval Engine Oil Hydraulic Oil 5,000 hours Filters Vertically mounted (except Return) Engine Oil Filter, Remote Mounted Fuel Filter, Remote Mounted Hydraulic Filter 2,000 hours Return Oil Filter, Filtration 10 microns Sight Gauges: Hydraulic Reservoir, Engine-Oil Sampling Valve Refill Capacities Fuel Tank 1049 L (277 gal.) Cooling System 26 L (6.9 gal.) Engine Oil with Filter 23 L (6 gal.) Hydraulic Tank 136 L (36 gal.) Hydraulic System 257 L (68 gal.) Gearbox Swing 6 L (6.5 qt.) Travel (each) 7 L (7.5 qt.) Pump Drive 1 L (1.1 qt.) 21

22 ZAXIS DASH-3 Foresters BUTT & TOP Operating Weights With 840-kg (1818 lb.) Full Fuel Tank; 79-kg (175 lb.) Operator; 5203-kg (11,490 lb.) Counterweight; 1996-kg (4,400 lb.) Grapple and 700-mm (28 in.) Double-Grouser Shoes SAE Operating Weight kg (67,755 lb.) Operating Dimensions Lifting Capacity Over Front at Ground Level 6.1 m (20 ft.) Reach with Power Boost, with attachment 8001 kg (17,640 lb.) A Maximum Reach 9.94 m (32 ft. 7 in.) A Maximum Reach at Ground Level 9.71 m (31 ft. 10 in.) B Maximum Depth 3.30 m (10 ft. 10 in.) C Maximum Height m (38 ft.) D Maximum Level Log Height 8.23 m (27 ft.) E Minimum Swing Radius 4.57 m (15 ft.) CENTERLINE OF SWING C D GROUND LINE B E A A' 22

23 BUTT & TOP Machine Dimensions A Height 4.76 m (15 ft. 7 in.) B Overall Length m (44 ft. 11 in.) C Rear-End Length/Swing Radius 3.10 m (10 ft. 2 in.) D Distance Between Idler/Sprocket Centerline 3.66 m (12 ft.) E Undercarriage Length 4.45 m (14 ft. 7 in.) F Counterweight Clearance 1.38 m (4 ft. 6 in.) G Maximum Shipping Width / with 48 in. Side Entry Cab 3.50 m (11 ft. 6 in.) Maximum Shipping Width / with 48 in. Rear Entry Cab 3.54 m (11 ft. 7 in.) H Cab Height (Transport) / with 48 in. Side Entry Cab 3.39 m (11 ft. 1 in.) Cab Height (Transport) / with 48 in. Rear Entry Cab 3.43 m (11 ft. 3 in.) I Track Width w/ Double-Grouser Shoes 0.70 m (28 in.) J Gauge Width 2.62 m (8 ft. 7 in.); 2.79 m (9 ft. 2 in.) K Ground Clearance 0.71 m (2 ft. 4 in.) L Undercarriage Width 3.33 m (10 ft. 11 in.); 3.49 m (11 ft. 6 in.) G C H A F K I J D E L B Lift Charts Boldface type indicates hydraulically limited capacity; lightface type indicates stability-limited capacities, in kg (lb.). Ratings at bucket lift hook; machine equipped with standard gauge and situated on firm, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do not exceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine. All lift capacities are based on ISO (with power boost). Load Point Height 3.1 m (10 ft.) 4.6 m (15 ft.) 6.1 m (20 ft.) 7.6 m (25 ft.) 9.1 m (30 ft.) 9.9 m (32.5 ft.) Horizontal Distance from Centerline of Rotation Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side 10.7 m (35 ft.) 9008 (19,860) 9008 (19,860) 9.1 m (30 ft.) 7620 (16,800) 7620 (16,800) 6595 (14,540) 6595 (14,540) 7.6 m (25 ft.) 7285 (16,060) 7285 (16,060) 6278 (13,840) 6278 (13,840) 5520 (12,170) 4527 (9,980) 6.1 m (20 ft.) 7711 (17,000) 7711 (17,000) 6459 (14,240) 6459 (14,240) 5498 (12,120) 4531 (9,990) 4.6 m (15 ft.) 8886 (19,590) 8886 (19,590) 6990 (15,410) 6881 (15,170) 5693 (12,550) 4427 (9,760) 4173 (9,200) 2944 (6,490) 3.1 m ( 10 ft.) 7666 (16,900) 6559 (14,460) 5897 (13,000) 4268 (9,410) 4105 (9,050) 2880 (6,350) 1.5 m (5 ft.) 8128 (17,920) Ground Line (25,510) (21,670) (17,640) 1.5 m ( 5 ft.) (31,630) (31,630) (22,030) (21,230) (15,450) 3.1 m ( 10 ft.) (15,500) (15,500) (10,850) 6214 (13,700) 5956 (13,130) 5824 (12,840) 4922 (10,850) 5715 (12,600) 5575 (12,290) 4795 (10,570) 4096 (9,030) 3964 (8,740) 3896 (8,590) 4023 (8,870) 3847 (8,480) 2422 (5,340) 2803 (6,180) 2749 (6,060) 2422 (5,340) 3420 (7,540) 2336 (5,150) 23

24 ZAXIS DASH-3 Foresters POWER CLAM Engine Manufacturer and Model Isuzu AI-4HK1X Non-Road Emissions Standards Certified to EPA Tier-3 emissions Net Rated Power (ISO 9249) 164 kw (122 2,000 rpm Cylinders 4 Displacement 5.1 L (317 cu. in.) Off-Level Capacity 70% (35 deg.) Aspiration Turbocharged, air-to-air charge-air cooler Cooling Direct drive with mechanically reversing option, high efficiency, low noise, suction type Engine Coolant Rating -37 C (-34 F) Powertrain 2-speed propel with automatic shift Maximum Travel Speed Low 3.2 km/h (2.0 mph) High 5.1 km/h (3.2 mph) Controls Pilot levers, low-effort, hydraulic pilot controls with shutoff lever Hydraulics Open center, load sensing Main Pumps 2 variable-displacement axial-piston pumps Maximum Rated Flow 212 L/m (56 gpm) x 2 Pilot Pump One gear Maximum Rated Flow 30 L/m (7.9 gpm) Pressure Setting 3999 kpa (580 psi) System Operating Pressure Circuits Implement Travel Swing Power Boost kpa (5,270 psi) Auxiliary Hydraulic-Flow Adjustable Through Monitor Cylinders Heat treated, chrome-plated, polished cylinder rods, hardened steel (replaceable bushings) pivot pins Bore Rod Diameter Stroke Boom (2) 135 mm (5.3 in.) 95 mm (3.7 in.) 1160 mm (45.7 in.) Arm (1) 145 mm (5.7 in.) 100 mm (3.9 in.) 1555 mm (61.2 in.) Tool (1) 115 mm (4.5 in.) 80 mm (3.2 in.) 1060 mm (41.7 in.) Electrical Voltage 24 volt Number of Batteries (12 volt) 2 Battery Capacity 440 minutes Alternator Rating 80 amp Work Lights None Undercarriage Rollers (each side) Carrier 2 Track 8 Shoes (each side) 48 Drawbar Pull kg (49,900 lb.) Track Adjustment Hydraulic Guides Center Chain Sealed and lubricated 24

25 POWER CLAM Upperstructure Counterweight, Standard 5203 kg (11,490 lb.) Ground Pressure 700-mm (28 in.) Double-Grouser Shoes 54 kpa (7.89 psi) Swing Mechanism Swing Speed 12.6 rpm Swing Torque Nm (54,857 lb.-ft.) Serviceability Side by side coolers with external debris protection, Centralized Lube Banks, and O Ring Face Seal Connectors on most hydraulic hoses, Diagnostics Machine Information Center (MIC), Computerized In-Cab Monitor Information, and Fluid Sampling Ports. Fluid Change Interval Engine Oil Hydraulic Oil 5,000 hours Filters Vertically mounted (except Return) Engine Oil Filter, Remote Mounted Fuel Filter, Remote Mounted Hydraulic Filter 2,000 hours Return Oil Filter, Filtration 10 microns Sight Gauges: Hydraulic Reservoir, Engine-Oil Sampling Valve Refill Capacities Fuel Tank 1049 L (277 gal.) Cooling System 26 L (6.9 gal.) Engine Oil with Filter 23 L (6 gal.) Hydraulic Tank 136 L (36 gal.) Hydraulic System 257 L (68 gal.) Gearbox Swing 6 L (6.5 qt.) Travel (each) 7 L (7.5 qt.) Pump Drive 1 L (1.1 qt.) 25

26 ZAXIS DASH-3 Foresters POWER CLAM Operating Weights With 840-kg (1818 lb.) Full Fuel Tank; 79-kg (175 lb.) Operator; 5203-kg (11,490 lb.) Counterweight; 1996-kg (4,400 lb.) Grapple and 700-mm (28 in.) Double-Grouser Shoes SAE Operating Weight kg (67,755 lb.) Operating Dimensions Lifting Capacity Over Front at Ground Level 6.1 m (20 ft.) Reach with Power Boost, with attachment 8001 kg (17,640 lb.) A Maximum Reach 9.94 m (32 ft. 7 in.) A Maximum Reach at Ground Level 9.71 m (31 ft. 10 in.) B Maximum Depth 3.30 m (10 ft. 10 in.) C Maximum Height m (38 ft.) D Maximum Level Log Height 8.23 m (26 ft.) E Minimum Swing Radius 4.27 m (14 ft.) CENTERLINE OF SWING C D GROUND LINE B E A A' 26

27 POWER CLAM Machine Dimensions A Height 4.76 m (15 ft. 7 in.) B Overall Length m (45 ft. 2 in.) C Rear-End Length/Swing Radius 3.10 m (10 ft. 2 in.) D Distance Between Idler/Sprocket Centerline 3.66 m (12 ft.) E Undercarriage Length 4.45 m (14 ft. 7 in.) F Counterweight Clearance 1.38 m (4 ft. 6 in.) G Maximum Shipping Width / with 48 in. Side Entry Cab 3.50 m (11 ft. 6 in.) Maximum Shipping Width / with 48 in. Rear Entry Cab 3.54 m (11 ft. 7 in.) H Cab Height (Transport) / with 48 in. Side Entry Cab 3.45 m (11 ft. 4 in.) Cab Height (Transport) / with 48 in. Rear Entry Cab 3.45 m (11 ft. 4 in.) I Track Width w/ Double-Grouser Shoes 0.70 m (28 in.) J Gauge Width 2.62 m (8 ft. 7 in.); 2.79 m (9 ft. 2 in.) K Ground Clearance 0.71 m (2 ft. 4 in.) L Undercarriage Width 3.33 m (10 ft. 11 in.); 3.49 m (11 ft. 6 in.) G C H A F K I J D E L B Lift Charts Boldface type indicates hydraulically limited capacity; lightface type indicates stability-limited capacities, in kg (lb.). Ratings at bucket lift hook; machine equipped with standard gauge and situated on firm, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do not exceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine. All lift capacities are based on ISO (with power boost). Load Point Height 3.1 m (10 ft.) 4.6 m (15 ft.) 6.1 m (20 ft.) 7.6 m (25 ft.) 9.1 m (30 ft.) 9.9 m (32.5 ft.) Horizontal Distance from Centerline of Rotation Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side 10.7 m (35 ft.) 9008 (19,860) 9008 (19,860) 9.1 m (30 ft.) 7620 (16,800) 7620 (16,800) 6595 (14,540) 6595 (14,540) 7.6 m (25 ft.) 7285 (16,060) 7285 (16,060) 6278 (13,840) 6278 (13,840) 5520 (12,170) 4527 (9,980) 6.1 m (20 ft.) 7711 (17,000) 7711 (17,000) 6459 (14,240) 6459 (14,240) 5498 (12,120) 4531 (9,990) 4.6 m (15 ft.) 8886 (19,590) 8886 (19,590) 6990 (15,410) 6881 (15,170) 5693 (12,550) 4427 (9,760) 4173 (9,200) 2944 (6,490) 3.1 m ( 10 ft.) 7666 (16,900) 6559 (14,460) 5897 (13,000) 4268 (9,410) 4105 (9,050) 2880 (6,350) 1.5 m (5 ft.) 8128 (17,920) Ground Line (25,510) (21,670) (17,640) 1.5 m ( 5 ft.) (31,630) (31,630) (22,030) (21,230) (15,450) 3.1 m ( 10 ft.) (15,500) (15,500) (10,850) 6214 (13,700) 5956 (13,130) 5824 (12,840) 4922 (10,850) 5715 (12,600) 5575 (12,290) 4795 (10,570) 4096 (9,030) 3964 (8,740) 3896 (8,590) 4023 (8,870) 3847 (8,480) 2422 (5,340) 2803 (6,180) 2749 (6,060) 2422 (5,340) 3420 (7,540) 2336 (5,150) 27

28 hitachiconstruction.com Control Owning and Operating Costs Customer Personal Service (CPS) is part of Hitachi s proactive, fixbefore-fail strategy on machine maintenance that will help control costs, increase profits and reduce stress. Included in this comprehensive lineup of ongoing programs and services are: Fluid analysis program tells you what s going on inside all of your machine s major components so you ll know if there s a problem before you see a decline in performance. Fluid analysis is included in most extended coverage and preventive-maintenance agreements. Component life-cycle data gives you vital information on the projected life span of components and lets you make informed decisions on machine maintenance by telling you approximately how many hours of use you can expect from an engine, transmission or hydraulic pump. This information can be used to preempt catastrophic downtime by servicing major components at about 80 percent of their life cycle. Preventive Maintenance (PM) agreements give you a fixed cost for maintaining a machine for a given period of time. They also help you avoid downtime by ensuring that critical maintenance work gets done right and on schedule. On-site preventive maintenance service performed where and when you need it helps protect you from the expense of catastrophic failures and lets you avoid waste-disposal hassles. Extended coverage gives you a fixed cost for machine repairs for a given period of time so you can effectively manage costs. Whether you work in a severe-service setting or just want to spread the risk of doing business, this is a great way to custom-fit coverage for your operation. And an extended coverage contract also travels well because it s backed by Hitachi and is honored by all Hitachi construction dealers. Customer Support Advisors (CSAs) Hitachi believes the CSA program lends a personal quality to Customer Personal Service (CPS). Certified CSAs have the knowledge and skills for helping make important decisions on machine maintenance and repair. Their mission is to help you implement a plan that s right for your business and take the burden of machine maintenance off your shoulders. DKAF210HT Litho in U.S.A. (14-12) Hitachi Construction and Mining Products th Avenue Moline, IL 61265