DL350 TECHNICAL DATA
|
|
- Randell McLaughlin
- 6 years ago
- Views:
Transcription
1 DL350 TECHNICAL DATA
2 GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL08 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER (GROSS) hp / rpm 232 / 2,000 (SAE J1995) kw / rpm 172 / 2,000 RATED FLYWHEEL POWER (NET) hp / rpm 221 / 2,000 (SAE J1349) kw / rpm 164 / 2,000 ft lb 1,200 rpm MAX. TORQUE (GROSS) (SAE J1995) Nm 1,200 rpm ENGINE in³ 466 PISTON DISPLACEMENT cc 7,640 in 4.3 x 5.8 BORE AND STROKE 108 x 139 V 24 STARTER kw 6 ea. 2 BATTERIES V 12 AH 150 lb 43,358 OPERATING WEIGHT kg 19,667 yd³ 4.8 BUCKET CAPACITY (BOT/BOC SAE HEAPED) m³ 3.7 U.S. gpm 42 / 42 / 11 MAIN PUMPS L/min 160 / 160 / 40 psi 2,845 SYSTEM PRESSURE (WORK) bar 196 psi 3,129 SYSTEM PRESSURE (STEER) bar 216 MPH 3.9 / 7.3 / 13.8 / 21.4 FORWARD (1 / 2 / 3 / 4) km / h 6.2 / 11.7 / 22.2 / 34.5 TRAVEL SPEED MPH 3.9 / 7.1 / 13.3 REVERSE (1 / 2 / 3) km / h 6.2 / 11.5 / 21.4 UP (LOADED) sec. 6.3 ±0.5 BOOM SPEED UP (UNLOADED) sec. 6.1 ±0.5 DOWN sec. 3.9 ±0.5 CROWD (LOADED) sec. 1.4 ±0.5 BUCKET SPEED CROWD (UNLOADED) sec. 1.3 ±0.5 DUMP sec. 2.0 ±0.5 % 51 GRADEABILITY 27 TIRE SIZE PR (L3) BREAKOUT FORCE lbf 37,699 kgf 17,100
3 DL350 ITEMS UNIT STANDARD DUMP HEIGHT AT 45 10'0" 3,041 DUMP REACH AT 45 3'11" 1,189 MAX. DUMP ANGLE (FULLY RAISED) 48 WORKING RANGE MAX. TILT ANGLE (ON GROUND) 42 MAX. TILT ANGLE (FULLY RAISED) 60 MAX. TILT ANGLE (AT CARRY) 48 BUCKET HINGE HEIGHT 13'8" 4,160 DIGGING DEPTH (0 LEVEL) 0'3.9" 100 OVERALL LENGTH 27'2" 8,275 OVERALL WIDTH 9'10" 3,000 TRAVEL DIMENSIONS OVERALL HEIGHT 11'3" 3,426 GROUND CLEARANCE 1'5" 423 WHEEL BASE 10'10" 3,300 TREAD 7'1" 2,150 MAX STEERING ANGLE 40 TURNING RADIUS (TIRE CENTER) 18'5" 5,608 TURNING RADIUS (TIRE EDGE) 19'5" 5,906 TURNING RADIUS (BUCKET EDGE) 21'8" 6,600 SOUND LEVEL IN CABIN (ISO 6396) db(a) 69.2 EXTERNAL SOUND POWER LEVEL (ISO 6395, 2000/14/EC) db(a) FUEL TANK CAPACITY US gal 86.1 Liter 326
4 OPERATIONAL DATA CONFIGURATION UNIT TEETH TEETH TEETH BOLT-ON EDGE CAPACITY HEAPED ISO / yd³ SAE m³ TOOTH TYPE Adapter tooth Adapter tooth Adapter tooth BUCKET WIDTH A 9'10" 9'10" 10'2" 9'10" 3,000 3,000 3,110 3,000 BREAKOUT FORCE lbf 37,699 37,699 37,699 37,699 kgf 17,100 17,100 17,100 17,100 STATIC TIPPING LOAD lb 34,128 34,178 34,112 33,768 (STRAIGHT) kg 15,480 15,503 15,473 15,317 STATIC TIPPING LOAD (AT lb 30,135 30,179 30,122 29,817 FULL TURN) kg 13,669 13,689 13,663 13,525 DUMP HEIGHT (AT 9'7" 9'7" 9'7" 10'0" 45 ) (AT FULLY J RAISED) 2,910 2,910 2,910 3,041 DUMP REACH (AT 4'4" 4'4" 4'4" 3'11" 45 ) (AT FULLY I RAISED) 1,325 1,325 1,325 1,189 DIGGING DEPTH H 0'4" 0'4" 0'4" 0'4" HEIGHT AT BUCKET PIVOT POINT MAX. TILT ANGLE AT CARRY POSITION MAX. TILT ANGLE AT FULLY RAISED MAX. TILT ANGLE ON GROUND EXTERNAL RADIUS AT TIRE SIDE EXTERNAL RADIUS AT BUCKET EDGE WHEEL BASE WIDTH AT TIRES TREAD GROUND CLEARANCE OVERALL LENGTH OVERALL HEIGHT OPERATING WEIGHT K 13'8" 13'8" 13'8" 13'8" 4,160 4,160 4,160 4,160 a b R D G B V C F E '5" 19'5" 19'5" 19'5" 5,906 5,906 5,906 5,906 21'8" 21'8" 21'10" 21'5" 6,600 6,600 6,655 6,518 10'10" 10'10" 10'10" 10'10" 3,300 3,300 3,300 3,300 9'0" 9'0" 9'0" 9'0" 2,750 2,750 2,750 2,750 7'1" 7'1" 7'1" 7'1" 2,150 2,150 2,150 2,150 1'5" 1'5" 1'5" 1'5" '9" 27'9" 27'9" 27'2" 8,467 8,467 8,452 8,275 11'3" 11'3" 11'3" 11'3" 3,426 3,426 3,426 3,426 lb 43,041 42,990 43,056 43,400 kg 19,523 19,500 19,530 19,686
5 DL350 CONFIGURATION UNIT BOLT-ON EDGE BOLT-ON EDGE CAPACITY HEAPED ISO / SAE TOOTH TYPE BUCKET WIDTH A BREAKOUT FORCE STATIC TIPPING LOAD (STRAIGHT) STATIC TIPPING LOAD (AT FULL TURN) DUMP HEIGHT (AT 45 ) (AT FULLY J RAISED) DUMP REACH (AT 45 ) (AT FULLY I RAISED) DIGGING DEPTH H yd³ m³ lbf kgf lb kg lb kg 9'10" 3,000 37,699 17,100 33,810 15,336 29,855 13,542 10'0" 10'2" 3,110 37,699 17,100 33,715 15,293 29,771 13,504 10'0" 3,041 3,041 3'11" 3'11" 1,189 1,189 0'4" '8" 4,160 0'4" '8" 4,160 HEIGHT AT BUCKET PIVOT POINT MAX. TILT ANGLE AT CARRY POSITION MAX. TILT ANGLE AT FULLY RAISED MAX. TILT ANGLE ON GROUND EXTERNAL RADIUS AT TIRE SIDE a b EXTERNAL RADIUS AT BUCKET EDGE D WHEEL BASE G lb kg 19'5" 5,906 21'5" 6,518 10'10" 3,300 9'0" 2,750 7'1" 2,150 1'5" '2" 8,275 11'3" 3,426 43,358 19,667 19'5" 5,906 21'9" 6,617 10'10" 3,300 9'0" 2,750 7'1" 2,150 1'5" '2" 8,275 11'3" 3,426 43,453 19,710 K R WIDTH AT TIRES B TREAD V GROUND CLEARANCE C OVERALL LENGTH F OVERALL HEIGHT E OPERATING WEIGHT b a
6 STANDARD EQUIPMENT ENGINE Doosan DL08; Turbo Charged Air to Air Intercooler Electronically Controlled Coon Rail Direct Injected 466 in³ (7.6 liter), 6 Cylinder 221 SAE Net Flywheel Horsepower (173 2,000 rpm Air Cleaner: Dry Type (Double Stage) Engine Self-diagnostic System Plastic Reversible Fan Driven by Hydraulic Fan Motor HYDRAULIC SYSTEM Triple Tandem Vane Hydraulic Pump with Automatic Wear Compensation 2 Spool Type Control Valve (Pilot Operated) 3rd Valve with Lines and Control Automatic Boom / Lift Kick-out (Adjustable Electromagnetic) Automatic Return-to-Dig Position (Adjustable Electromagnetic) Accumulator for Emergency Pilot System BRAKE SYSTEM Dual Pedal Braking System 4 Wheel Outboard Wet Disk Brakes Fully Hydraulic, 4-Wheel Brakes with Separate Front and Rear Circuits Accumulator for Emergency Stopping Parking Brake: Spring Applied, Dry Disk, Electric-Hydraulic Released STEERING EHPS (Electrohydraulic Power Steering) with Integrated Priority Valve 40 Degree Articulation, Full Hydraulic Power Steering Steering Cylinder Cushion Valve Tilt and Telescopic Steering Wheel CABIN WITH ROPS Air Conditioner Heater and Defroster Double Filtered Air Cabin Combination Lever Accelerator Pedal FNR Lever Manual / Automatic Mode Switch Rear Hinged (Both Sides) and Locking Doors (Emergency Access Right Side) Radio, AM-FM Stereo, with Cassette Switches: Economy Mode Switch Headlight Switch Front Work Light Switch Rear Work Light Switch Rear Wiper Switch Pilot Cutoff Switch Parking Brake Switch Transmission Cutoff Switch Mirror Heater Switch Reverse Fan Switch Engine Diagnostic Switch Rearview Mirrors with Heat Wire Safety Glass, Tinted Fully Adjustable Air Suspension Seat Seat Belt (2 Wide) Sliding Door Windows (Left Side) Sound Suppression Sun Visor Windshield Wipers and Washers Front and Rear Digital Clock Wrist Rest 12 Volt Power Supply TRANSMISSION / AXLES Fully Automatic Power Shift 4 Forward and 3 Reverse Speeds Differentials Limited Slip Front and Rear Self Adjusting Brake Disk Clearance Torque Converter, Single Stage, 3-Phase, 3-Element Electrical T/M Clutch Disconnect with Service Brake T/M Down Shift on Shift Control and Joy Stick Control Transmission Oil Level Gauge
7 DL350 ELECTRICAL Alternator, 60 amp, 24 Volt Batteries, (2) 12 Volt, 150 amp Hrs. 950 CCA Starter, 24 Volt 6.0 kw Horn Hour Meter Lights: (2) Front Headlights with High / Low Beams (2) Stoplights, Taillights and Directional Indicators (2) Front and Rear Floodlights Alarm Buzzer for: Transmission Overheat Engine Oil Pressure Coolant Temperature Electronic Monitoring and Display for: Fuel Level Gauge Speedometer Tachometer Engine Coolant Temperature Gauge Transmission Oil Temperature Gauge Transmission Display Preheat Indicator Light Air Cleaner Clogging Warning Light Battery Warning Light Left Turn and Hazard Warning Light Right Turn and Hazard Warning Light High Beam Indicator Light Work Light Indicator Light Reverse Fan Indicator Light Mirror Heater Indicator Light Parking Brake Indicator Light F/R (Forward/Reverse) Selector Indicator Light Brake Pilot Pressure Warning Light Engine Warning Light Backup Alarm Hazard Warning Light Switch TIRES Bias Kumho Hankook OTHER STANDARD EQUIPMENT Single Lever Control with FNR Control Buttons Air Cleaner with Precleaner Sealed Pins, Boom and Bucket Linkages Engine Side Covers Boom / Raise Kick-out Boom / Float Drawbar and Pin Neutral Safety Start System Muffler Fenders, Front and Rear Ladders and Service Platforms Tool Box Manuals, Parts and Operator's GPS with 1 Year Subscription
8 OPTIONAL EQUIPMENT TIRES AND RIMS FACTORY INSTALLED 23.5R25 L3 Radial Triangle Or Bridgestone DOOSAN BUCKETS FACTORY INSTALLED 4.8 yd³ (3.67 m³) General Purpose Pin on 118" (2,997 ) Width w/3-piece Cutting Edge ADDITIONAL OPTIONS FACTORY INSTALLED Additional Counterweight 551 lb (250 kg) Emergency Steering Kit Load Isolation / Ride Control Full Fender Finger Tip Lever Front Controls Rear View Camera ACS BUCKETS DEALER INSTALLED 4.5 yd³ (3.44 m³) General Purpose Pin On Bucket 120" (3,048 ) w/bolt On Cutting Edge 4.5 yd³ (3.44 m³) General Purpose Coupler Mounted Bucket 120" (3,048 ) w/bolt On Cutting Edge 3.5 yd³ (2.68 m³) Multiple Purpose Pin On Bucket 120" (3,048 ) w/bolt On Cutting Edge 3.5 yd³ (2.68 m³) Multiple Purpose Coupler Mounted Bucket 120" (3,048 ) w/bolt On Cutting Edge ACS COUPLER DEALER INSTALLED Pro Series 2000 Hydraulic Coupler w/hydraulic Installation Kit (#60) ACS FORKS DEALER INSTALLED 66" (1,676 ) Pallet Forks ADDITIONAL OPTIONS DEALER INSTALLED Auxiliary Line Kit Down the Boom Arms 3" (76 ) Seat Belt
9 NOTES DL350
10 NOTES
11 NOTES DL350
12 BRO-DL350-TD KN-2M F For more information visit Doosan is a registered trademark of Doosan Corp. in the United States Doosan Infracore Construction Equipment America. All rights reserved.
DL250 TECHNICAL DATA
DL250 TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 163 / 2,100 (GROSS) (SAE J1995) kw / rpm 121 / 2,100 RATED
More informationDoosan Infracore DL220 TECHNICAL DATA
Doosan Infracore Construction Equipment DL220 TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 148 / 2,200 (GROSS)
More informationDL250TC TECHNICAL DATA
DL250TC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 163 / 2,100 (GROSS) (SAE J1995) kw / rpm 121 / 2,100 RATED
More informationDX140LC TECHNICAL DATA
DX140LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 98.6 / 1,850 (hp PER SAE J1995) GROSS
More informationDoosan Infracore DX55W TECHNICAL DATA
Doosan Infracore Construction Equipment DX55W TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Yanmar 4TNV98-E NUMBER OF CYLINDERS 4 RATED FLYWHEEL POWER hp / rpm 56.8 / 2,400 (hp PER SAE
More informationDX420LC TECHNICAL DATA
DX420LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DV11 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 293 / 1,800 (hp PER SAE J1995) GROSS kw
More informationDoosan Infracore DX700LC TECHNICAL DATA
Doosan Infracore Construction Equipment DX700LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ISUZU AH6WG1XYSC01 NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 463 / 1,800 (GROSS)
More informationDoosan Infracore DX225LL TECHNICAL DATA
Doosan Infracore Construction Equipment DX225LL TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 155 / 1,900 (hp PER SAE J1995)
More information521F/XT/XR ARTICULATED
521F/XT/XR ARTICULATED WHEEL LOADER TIER 4 INTERIM CERTIFIED PRELIMINARY engine Model CNH CFPXL04.5SCB, F4HFE413J Tier4a/Stage 3b 4-stroke, turbocharged Type Cylinders 4 Bore/Stroke 4.09 in x 5.20 in (104
More information821E/XR. Transmission 4F/3R Proportional w/electronic Control Module torque sensing autoshift/manual shift and modulation
821E/XR ARTICULATED WHEEL LOADER TIER III CERTIFIED ENGINE Model Type Case Family IV, 667TA/EBD Tier III Certified 4-stroke, turbocharged and air-to-air cooled Cylinders 6 Bore/Stroke 4.09 in x 5.20 in
More information9.50M BACKHOE LOADER. Net Horsepower 70 kw (95 hp) Digging depth, boom retracted 4760 mm (15'7") Digging depth, boom extended 5860 mm (19'3")
9.50M BACKHOE LOADER Net Horsepower 70 kw (95 hp) Operating Weight 8900 kg (19,621 lb) Digging depth, boom retracted 4760 mm (15'7") Digging depth, boom extended 5860 mm (19'3") Safe ROPS/FOPS operator
More informationLX80. Note: General purpose bucket with bolt on cutting edges. I J K. Unit : mm
S P E C I F I C A T I O N S LX80 W H E E L L O A D E R n Engine Rated Power : 80.9 kw (110 PS) n Operating Weight : Canopy / (Rops / Fops) Cab 8 120 kg / 8 610 kg n Backhoe Bucket : ISO Heaped - 1.9 40
More informationS P E C I F I C A T I O N S
S P E C I F I C A T I O N S LX50 W H E E L L O A D E R Engine Rated Power : 44.1 kw (60 PS) Operating Weight : Canopy / Cab 4 695 kg (10 350 lb) / 4 845 kg (10 680 lb) Backhoe Bucket : ISO Heaped 0.6 m
More informationWHEEL LOADER WHEEL LOADER. ZW series Parallel linkage tool carrier version
ZW series Parallel linkage tool carrier version WHEEL LOADER WHEEL LOADER Model Code: ZW140PL / ZW150PL / ZW1PL Operating Weight: ZW140PL: 11 950-12 010 ZW150PL: 13 370-13 400 ZW1PL: 15 240-15 430 Bucket
More informationWith Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 Specifications R145LCR-9A ENGINE MODEL Type PERKINS 1204E Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged,
More information621E/XT/XR. Transmission 4F/3R Proportional w/electronic Control Module torque sensing autoshift/manual shift and modulation
621E/XT/XR ARTICULATED WHEEL LOADER TIER III CERTIFIED ENGINE Model Type Case Family IV, 667TA/EDB, Tier III certified 4-stroke, turbocharged and air to air cooled Cylinders 6 Bore/Stroke 4.11 in x 5.20
More informationCONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side.
SPECIFICATIONS ENGINE Maker / Model Type Rated flywheel horse power SAE DIN Perkins 1204F Water-cooled, 4-cycle diesel, 4-cylinder inline, Direct injection, Turbocharged, Charge and air cooled J1995 (gross)
More information721E/XT/XR. Transmission 4F/3R Proportional w/electronic Control Module torque sensing autoshift/manual shift and modulation
721E/XT/XR ARTICULATED WHEEL LOADER TIER III CERTIFIED ENGINE Model Type Case Family IV 667TA/EED, Tier III certified 4-stroke, turbocharged and air-to-air cooled Cylinders 6 Bore/Stroke 4.09 in x 5.20
More informationENGINE HYDRAULIC SYSTEM. TRANSMISSION 5 speed T/M 4 speed T/M Travel speed STEERING SYSTEM AXLES SERVICE REFILL CAPACITIES OVERVIEW CAB TIRES SOUND
ENGINE Engine / Model Cummins / QSB6.7 Maximum Gross Power (2,200 rpm) SAE J1995 168 kw 225 hp Maximum Net Power (2,200 rpm) SAE J1349 166 kw 222 hp Peak Gross Torque (1,500 rpm) SAE J1995 1044 N m 770
More information534E WHEEL LOADER. Bucket Capacity 2.6 m 3 to 5.7 m 3 (3.4 yd 3 to 7.5 yd 3 ) Net Horsepower 169 kw (227 hp) Operating Weight kg (45,917 lb)
534E WHEEL LOADER Net Horsepower 169 kw (227 hp) Capacity 2.6 m 3 to 5.7 m 3 (3.4 yd 3 to 7.5 yd 3 ) Operating Weight 20828 kg (45,917 lb) The best in the business for productivi features and a wide choice
More information1021F/XR. Transmission: 4F/ 3R Proportional w/ Electronic Control Module torque sensing autoshift /manual shift and modulation
1021F/XR WHEEL LOADER TIER 4 INTERIM CERTIFIED ENGINE Make Case / FPT Model F2CFE614C Tier 4 interim certified Type 4-stroke, turbocharged Cylinders 6-cylinder in-line Bore / Stroke 4.61 in x 5.31 in (177
More informationEngine Gross Power Operating Weight Bucket Capacity 835H
Engine Perkins 1204F Tier 4 Final Gross Power 131 hp (98 kw) Operating Weight 23,760-24,640 lbs (10,800-11,200 kg) Bucket Capacity 2.5 yd 3 (1.9 m 3 ) 835H 2 3 4 MORE POWER LESS CONSUMPTION The new 835H
More information121F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED
121F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Model Emissions Certification Type FPT F5H FL463 C*F001 Tier 4 Final 4-stroke Cylinders 4 Bore/ 3.9 x 4.3 in (99 x 110 mm) Displacement 207 in 3
More informationDRIVETRAIN. NOTE: Travel speeds at full engine throttle. ELECTRICAL
321D Articulated Wheel Loader ENGINE Model... Perkins 1004-42 Type... 4-stroke, turbocharged Cylinders... 4 Bore/Stroke... 4.06 x 5.00 (105 X 127 mm) Displacement... 258 in 3 (4.23 L) Fuel injection...
More information21F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED
21F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Model Emissions Certification Type FPT F5H FL463 B*F001 Tier 4 Final 4-stroke Cylinders 4 Bore/ 3.9 x 4.3 in (99 x 110 mm) Displacement 207 in 3 (3.4
More information621F/XT/XR ENGINE (CONTD.)
621F//XR WHEEL LOADER TIER 4 INTERIM CERTIFIED ENGINE Make Model Type Cylinders Bore / Stroke Case / FPT F4HFE613Z Tier 4 Interim certified 4-stroke, turbocharged and air-to-air-cooled 6-cylinder in-line
More information1021F. NOTE: Gross horsepower and torque per SAE J1995. Net horsepower and torque per SAE J1349.
1021F XR WHEEL LOADER TIER 4 INTERIM CERTIFIED ENGINE Make FPT Model F2CFE614C Emissions Certification Tier 4 Interim Type 4-stroke, turbocharged and air-to-air cooled Cylinders 6-cylinder in-line Bore/Stroke
More information1121F. NOTE: Gross horsepower and torque per SAE J1995. Net horsepower and torque per SAE J1349.
1121F XR WHEEL LOADER TIER 4 INTERIM CERTIFIED ENGINE Make FPT Model F2CFE614B Emissions Certification Tier 4 interim Type 4-stroke, turbocharged and air-to-air cooler Cylinders 6-cylinder in-line Bore/Stroke
More informationSpecif ications R125LCR-9A
Specif ications R125LCR-9A ENGINE MODEL PERKINS 1204E Water cooled, 4 cycle Diesel, 4-cylinders Type in line, direct injection, turbocharged, charged air cooled and low emission Rated flywheel horse power
More information1121G Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED
1121G Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Make Model Emissions Certification Emissions Technology Type Cylinders Bore/Stroke FPT F2CFE614F Tier 4 Final SCR/DOC 4-stroke, turbocharged and
More information521G Z-BAR/XT/XR WHEEL LOADER TIER 4 FINAL CERTIFIED
521G Z-BAR/XT/XR WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Make Model Emissions Certification Emissions Technology Type Cylinders Bore/Stroke FPT F4HFE413NB Tier 4 Final SCR/DOC 4-stroke, turbocharged
More information555C WHEEL LOADER. Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Net Horsepower 238 kw (319 hp) Operating Weight kg (63,753 lb)
555C WHEEL LOADER Net Horsepower 238 kw (319 hp) Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Operating Weight 28918 kg (63,753 lb) World class loader meeting high production requirements
More informationWHEEL LOADERS LW170.B. Specifications.
WHEEL LOADERS Specifications LW170.B www.newhollandconstruction.com LW170.B DIMENSIONS 40 45 K L I O J B A N F E C P M D G H A. Height to top of cab...132.8 (3374 mm) B. Height to top of exhaust...114.8
More informationHITACHI LX290E. engine rated power 228 kw / 306 HP. operating weight kg. bucket capacity m 3
HITACHI LX290E engine rated power 228 kw / 306 HP operating weight 21 455-23 075 kg bucket capacity 4.0-4.5 m 3 EQUIPMENT Engine Steering Make............................................. Isuzu Model........................................
More information1021G Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED
1021G Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Make Model Emissions Certification Emissions Technology Type Cylinders Bore/Stroke FPT F2CFE614H Tier 4 Final SCR/DOC 4-stroke, turbocharged and
More information921F. NOTE: Gross horsepower and torque per SAE J1995. Net horsepower and torque per SAE J1349.
921F Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Make Model Emissions Certification Type Cylinders Bore/Stroke FPT F4HFE613 Tier 4 Final 4-stroke, turbocharged and air-to-air cooled 6-cylinder
More informationTechnical Specifications
140 Motor Grader Technical Specifications Engine Engine Model Cat C9.3 Net Power ISO 9249/SAE J1349 186 kw 250 hp Net Power EEC 80/1269 186 kw 250 hp Net Power All-Wheel Drive (AWD) 201 kw 270 hp VHP Plus
More informationCX130C. Swing mechanism. Swing torque 24,400 lb ft (33,000 N m) Length 12 ft 4 in (3.76 m) Track gauge 6 ft 6 in (1.99 m)
CX130C EXCAVATOR LONG UNDERCARRIAGE (LC) TIER 4 INTERIM CERTIFIED engine Model Isuzu AM-4JJ1X, Tier 4 Interim Certified (Cooled EGR) Fuel Type Cylinders Requires ultra low-sulfur fuel B5 biodiesel tolerant
More informationSpecifications WHEEL LOADERS LW130.B LONG REACH.
WHEEL LOADERS Specifications LW130.B LONG REACH www.newhollandconstruction.com LW130.B DIMENSIONS 40 45 K L I O J B A N F E C P M D G H A. Height to top of cab...133.9 (3400 mm) B. Height to top of exhaust...114.8
More informationEXCAVATOR STANDARD & DOZER BLADE EQUIPPED TIER 3 CERTIFIED
CX225 MSR EXCAVATOR STANDARD & DOZER BLADE EQUIPPED TIER 3 CERTIFIED ENGINE Model Type Isuzu AI-4HK1X, Tier 3 certified 4-stroke, turbocharged Cylinders 4 Displacement Bore/Stroke Fuel injection Fuel filter
More information921G Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED
921G Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Make Model Emissions Certification Emissions Technology Type Cylinders Bore/Stroke FPT F4HFE613R Tier 4 Final SCR/DOC 4-stroke, turbocharged and
More information821G Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED
821G Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Make Model Emissions Certification Emissions Technology Type Cylinders Bore/Stroke FPT F4HFE613S Tier 4 Final SCR/DOC 4-stroke, turbocharged and
More informationWHEEL LOADER 938H WHEEL LOADER 938H. Power Generation - Bulk Materials Standards I. GENERAL: DESCRIPTIONS FOR CATERPILLAR MODEL 938H WHEEL LOADER:
Power Generation - Bulk Materials Standards I. GENERAL: This standard is intended to provide specifications for the procurement of Caterpillar Model 938H Wheel Loaders that meet specific area operational
More information555C WHEEL LOADER. Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Net Horsepower 238 kw (319 hp) Operating Weight kg (63,753 lb)
555C WHEEL LOADER Net Horsepower 238 kw (319 hp) Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Operating Weight 28918 kg (63,753 lb) World class loader meeting high production requirements
More informationEC140B LC VOLVO EXCAVATOR
VOLVO EXCAVATOR EC140B LC Engine power, gross: 73 kw 98 hp Operating weight: 13.4 ~ 15.2 t 29,529 ~ 33,450 lb Buckets (SAE): 600 ~ 975 l 0.78 ~ 1.28 yd 3 Turbocharged Volvo diesel engine with direct injection
More informationCX210C EXCAVATOR. Swing mechanism. Length 14 ft 8 in (4.47 m) Track gauge 7 ft 10 in (2.4 m) Track Grease lubricated / strutted
CX210C EXCAVATOR LONG UNDERCARRIAGE (LC) TIER 4 INTERIM CERTIFIED engine Model Fuel Type Cylinders Isuzu AM-4HK1X Tier 4 Interim Certified (Cooled EGR) Requires ultra low-sulfur fuel B5 biodiesel tolerant
More information555C WHEEL LOADER. Bucket Capacity 5.5 yd 3 to 11.0 yd 3 (4.2 m 3 to 8.4 m 3 ) Net Horsepower 319 hp (238 kw) Operating Weight 63,753 lb (28918 kg)
555C WHEEL LOADER Net Horsepower 319 hp (238 kw) Bucket Capacity 5.5 yd 3 to 11.0 yd 3 (4.2 m 3 to 8.4 m 3 ) Operating Weight 63,753 lb (28918 kg) World class loader meeting high production requirements
More information530R WHEEL LOADER. Bucket Capacity 2.8 m 3 to 4.5 m 3 (3.7 yd 3 to 5.9 yd 3 ) Net Horsepower 155 kw (208 hp) Operating Weight kg (41,535 lb)
530R WHEEL LOADER Net Horsepower 155 kw (208 hp) Bucket Capacity 2.8 m 3 to 4.5 m 3 (3.7 yd 3 to 5.9 yd 3 ) Operating Weight 18840 kg (41,535 lb) WHEEL LOADER An innovative machine with state-of-the art
More information721F. Transmission: 4F/3R proportional w/ Electronic Control Module torque sensing autoshift/manual shift and modulation
721F WASTE HANDLER Articulated Wheel Loader Tier 4 Interim Certified ENGINE Make Model Type Cylinders Bore/Stroke Case/FPT F4HFE613Y Tier 4 Interim Certified 4-stroke, turbocharged and air-to-air-cooled
More information921F/XT/XR WHEEL LOADERS
921F/XT/XR WHEEL LOADERS ENGINE Make FPT Model F4HFE6131 Tier 2 certified Type 4-stroke, turbocharged Cylinders 6-cylinder in-line Bore/Stroke 4.09 in x 5.20 in (104 X 132 mm) Displacement 411 in 3 (6.7
More information310G 310SG ActionRental.com
0G 0SG BACKHOE LOADERS SPECIFICATIONS CONSTRUCTION EQUIPMENT DIVISION Engine 0G 0SG Type...John Deere 0D naturally aspirated standard / John Deere 0T John Deere 0T turbocharger altitude-compensating turbocharger
More informationCX130C OPERATOR ENVIRONMENT. Sound level ISO6395 inside cab 70 dba Electrical outlet Cab interior light (1) Rear-view camera (1) Air-suspension
CX130C EXCAVATOR LONG UNDERCARRIAGE (LC) TIER 4 INTERIM CERTIFIED ENGINE Model Emissions Certification Fuel Isuzu AM-4JJ1X, Cooled EGR Tier 4 Interim Requires ultra low-sulfur fuel B5 biodiesel tolerant
More informationNumber of rollers Top, each track 1 Bottom, each track 5 Number of shoes Triple grouser each side 39. Gradeability 70%
CX75 EXCAVATOR TIER III CERTIFIED ENGINE Model Isuzu AU-4LE2X,Tier III certified Type 4-stroke turbocharged Cylinders 4 Bore/Stroke 3.35 in x 3.78 in (85 x 96 mm) Displacement 133 in 3 (2179 cc) Fuel injection
More informationDRIVETRAIN. NOTE: Travel speeds at full engine throttle. ELECTRICAL
621D/XT/XR Articulated Wheel Loader ENGINE Model... Case 6BT-590 Type... 4-stroke, turbocharged Cylinders... 6 Bore/Stroke... 4.02 x 4.72 (102 X 120 mm) Displacement... 359 in 3 (5.9 L) Fuel injection...
More information821F/XR WHEEL LOADERS
821F/XR WHEEL LOADERS ENGINE Make Model Type Cylinders Bore/Stroke FPT F4HFE613X Tier 2 certified 4-stroke, turbocharged 6-cylinder in-line 4.09 in x 5.20 in (104 X 132 mm) Displacement 411 in 3 (6.7 L)
More informationCX135. Variable displacement axial piston design
CX135 EXCAVATOR TIER III CERTIFIED ENGINE Model Type Isuzu AJ-4JJ1X, Tier III certified 4-stroke, turbocharged Cylinders 4 Bore/Stroke Displacement Fuel injection Fuel injection pump Fuel Fuel filter Cooling
More information40,8 kw / 54,7 Hp at rpm kg mm. DX55w. Compact Equipment
40,8 kw / 54,7 Hp at 2.400 rpm 5.550 kg 3.495-3.795 mm DX55w Compact Equipment Doosan DX55w hydraulic excavator: a new model with novel features The new DX55w hydraulic excavator offers additional value
More informationVolvo High-performance, lowemission
VOLVO ARTICULATED HAULER A35C6X6 Engine output SAE J1349: Net 262 kw 351 hp Gross 267 kw 358 hp Body volume: 19 m 3 25 yd 3 Load capacity: 32 t 35 sh ton Volvo High-performance, lowemission direct-injected,
More information721F/XT/XR WHEEL LOADERS
721F/XT/XR WHEEL LOADERS ENGINE Make FPT Model F4HFE613Y Tier 2 certified Type 4-stroke, turbocharged and air-to-air-cooled Cylinders 6-cylinder in-line Bore/Stroke 4.09 in x 5.20 in (104 X 132 mm) Displacement
More informationwheel Loaders w110b w110b tc W110b lr w130b w130b tc W130b lr
w110b w110b tc W110b lr w130b w130b tc W130b lr wheel Loaders New Tier III Certified Engines with Four Work Modes Advanced Cooling System for Better Cooling & Balance Three Configurations Z-Bar, Tool Carrier,
More informationTXC 225LC-1 HYDRAULIC EXCAVATOR TXC 225LC-1. Hydraulic Excavator
Hydraulic Excavator OPERATING WEIGHT NET ENGINE POWER MAX DIG DEPTH MAX REACH 47,400 lbs (21,500 kg) 148 hp (110 kw) @ 1,950 rpm 21' 9" (6,630 mm) 32' 6" (9,910 mm) HYDRAULIC EXCAVATOR FEATURES Powerful,
More informationSpecifications R220LC-9A / R220NLC-9A
Specifications R220LC9A / R220NLC9A ENGINE MODEL Type CUMMINS QSB6.7 Water cooled, 4 cycle Diesel, 6Cylinders in line, direct injection, turbocharged, charged air cooled and low emission Rated flywheel
More informationCX800B EXCAVATOR. Number of rollers Top, each track 3 Bottom, each track 9 Number of shoes Double grouser each side 51
CX800B EXCAVATOR TIER III CERTIFIED ENGINE Model Type AH-6WG1XYSS, Tier III certified 4-stroke, turbocharged Cylinders 6 Bore/ Displacement Fuel injection Fuel Fuel filter Cooling Horsepower per SAE J1349
More informationWith Tier 4 Interim Engine installed. hyundai heavy industries
With Tier 4 Interim Engine installed hyundai heavy industries 1 Pride at Work Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,
More informationCOMPACT WHEEL LOADER WA80-5. NET HORSEPOWER 45 kw rpm OPERATING WEIGHT kg 12,434-13,062 lb
NET HORSEPOWER 45 kw 60 HP @ 2350 rpm OPERATING WEIGHT 5640-5925 kg 12,434-13,062 lb BUCKET CAPACITY 0.9-1.25 m 3 1.1-1.6 yd 3 WA 80 COMPACT WHEEL LOADER Photos may include optional equipment. C OMPACT
More informationSwing torque 80,800 N m (59,595 lbf ft) Two variable displacement piston pumps L/min ( gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi)
925E EXCAVATOR Tier 4 Final / Stage IV Specifications Operating weight 25,500 kg (56,218 lb) Operating weight includes coolant, lubricants, full fuel tank, cab, standard shoes, boom, arm, bucket and operator
More informationNumber of rollers Top, each track 3 Bottom, each track 8 Number of shoes Double grouser each side 47. Variable displacement axial piston design
CX700B EXCAVATOR TIER III CERTIFIED ENGINE Model Type AH-6WG1XYSS, Tier III certified 4-stroke, turbocharged Cylinders 6 Bore/Stroke Displacement 5.79 in x 6.07 in (147 x 154 mm) 957 in 3 (15 700 cc) Grade
More informationTwo variable displacement piston pumps L/min (2 x 79.3 gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi) Travel circuit 34.
922E EXCAVATOR Tier 4 Final / Stage IV Specifications Operating weight 22,800 kg (50,265 lb) SWING SYSTEM ELECTRIC SYSTEM Operating weight includes coolant, lubricants, full fuel tank, cab, standard shoes,
More informationHIGH-CAPACITY IC PNEUMATIC
HIGH-CAPACITY IC PNEUMATIC REACH NEW HEIGHTS 22000 51000 LBS. SPECIFICATIONS 50-4FD100-135 50-4FDK150-160 4FD150-230 CLASS 5 INTERNAL COMBUSTION ENGINE PNEUMATIC TIRE ToyotaForklift.com HIGH-CAPACITY IC
More informationVolvo High-performance, lowemission
A406X6 VOLVO ARTICULATED HAULER Engine output SAE J1349: Net 295 kw 395 hp Gross 297 kw 398 hp Body volume: 22 m 3 29.0 yd 3 Load capacity: 36 t 40 sh ton Volvo High-performance, lowemission direct-injected,
More information560E WHEEL LOADER. Bucket Capacity 7 yd 3 to 15 yd 3 (5.35 m 3 to 11.5 m 3 ) Net Horsepower 427 hp (319 kw) Operating Weight 92,549 lb ( kg)
560E WHEEL LOADER Net Horsepower 427 hp (319 kw) Bucket Capacity 7 yd 3 to 15 yd 3 (5.35 m 3 to 11.5 m 3 ) Operating Weight 92,549 lb (41 980 kg) Big machine comfort and power with fast cycle times and
More information6250 kg 13,779 lb 59 hp (44 kw) 8600 kg 18,960 lb 59 hp (44 kw) compact excavators 85R metric ton
compact excavators 6- metric ton 6 8 60 kg 1,779 lb 9 hp ( kw) 8600 kg 18,960 lb 9 hp ( kw) DOOSAN DELIVERS a heritage of dedication Doosan, a strong, stable and global company with a 118-year legacy,
More informationJCB LOADALL / /
MAX PAYLOAD: 4,000 lb (1,814 kg) MAX LIFT HEIGHT: 13 ft 3 in (4.0 m) MAX HORSEPOWER: 49 hp (37 kw) B A 520-40 H D E C F G 520-40 STATIC DIMENSIONS 10.00 x 16.5 12 ply Tires 12.00 x 16.5 10 ply Tires A
More informationCat BACKHOE LOADER. breakout forces and aggressiveness in hard bank applications. to the operator while roading.
Cat F BACKHOE LOADER The Cat F Backhoe Loader delivers performance, increased fuel efficiency, superior hydraulic system and an all new operator station. The F features the following: Ergonomic Operator
More informationEngine 310SK 310SK TC John Deere PowerTech E 4045HT063 turbocharged,
SK/SK TC Engine SK SK TC Manufacturer and Model John Deere PowerTech TM E HT7 turbocharged, standard John Deere PowerTech E HT6 turbocharged, standard Non-Road Emissions Standard EPA Interim Tier /EU Stage
More informationCX210C HYDRAULIC EXCAVATOR HYDRAULIC SYSTEM HYDRAULIC CONTROLS ENGINE MONITOR SYSTEM ELECTRICAL SYSTEM
CX210C HYDRAULIC EXCAVATOR ENGINE Brand Model Type ISUZU GI-4HK1X 4-stroke engine, water-cooled, 4 cylinder common rail injection system, turbocharged with air-cooled intercooler, with tier 3 emission
More informationCX245D SHORT RADIUS EXCAVATOR TIER 4 FINAL CERTIFIED
CX245D SHORT RADIUS EXCAVATOR TIER 4 FINAL CERTIFIED ENGINE Model Emissions Certification Fuel Isuzu AR-4HK1X Turbocharged w/cooled intercooler/ SCR System Tier 4 Final Requires ultra low-sulfur fuel B5
More information721G Z-BAR/XT/XR WHEEL LOADER TIER 4 FINAL CERTIFIED
721G Z-BAR/XT/XR WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Make Model Emissions Certification Emissions Technology Type Cylinders Bore/Stroke FPT F4HFE613T Tier 4 Final SCR/DOC 4-stroke, turbocharged
More information721F. NOTE: Gross horsepower and torque per SAE J1995. Net horsepower and torque per SAE J1349.
721F XT/XR WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Make FPT Model F4HFE613T Emissions Certification Tier 4 Final Type 4-stroke, turbocharged and air-to-air cooled Cylinders 6-cylinder in-line Bore/Stroke
More informationCX80C OPERATOR ENVIRONMENT
CX80C EXCAVATOR SWING BOOM TIER 4 FINAL CERTIFIED PRELIMINARY ENGINE Model Type Cylinders Isuzu AP-4LE2X, Tier 4 Final Certified Water-cooled, 4-cycle. Turbo-charged w/ air-cooled intercooler w/ DOC 4-cylinder
More informationCX245D SHORT RADIUS EXCAVATOR DOZER BLADE TIER 4 FINAL CERTIFIED
CX245D SHORT RADIUS EXCAVATOR DOZER BLADE TIER 4 FINAL CERTIFIED ENGINE Model Emissions Certification Fuel Isuzu AR-4HK1X Turbocharged w/cooled intercooler/ SCR System Tier 4 Final Requires ultra low-sulfur
More information939C Hystat Track-Type Loader
Engine Four-stroke cycle, in-line six cylinder Cat 3046 turbocharged diesel engine. Ratings at 2400 RPM* kw HP Gross power 74.6 100 Net power 67.9 90 The following ratings apply at 2400 RPM when tested
More information7 SERIES MINI EXCAVATOR
Dimensions 1,650 986 Standard Equipment 2,850 2,610 290 6,100 2,100 1,600 1,925 7 SERIES MINI EXCAVATOR ISO standard cabin Cabin ROPS(ISO 3471) FOPS(ISO 3449) TOPS(ISO 12117) All-weather steel cab with
More information428E Backhoe Loader. Engine Cat 3054C* C4.4** Steering. Brakes. Axles
Engine Cat 3054C* C4.4** Rated power (standard) 2,200 rpm 2,200 rpm Gross SAE J1995 68.5 kw/93 hp 70 kw/95 hp Net ISO 9249 65 kw/89 hp 67 kw/91 hp Net 80/1269/EEC 65 kw/89 hp 67 kw/91 hp Rated power (optional)
More informationCX250C CAB AND CONTROLS. Sound level inside cab ISO dba Electrical outlet Cab interior light. Air-suspension
CX250C EXCAVATOR LONG UNDERCARRIAGE (LC) TIER 4 INTERIM CERTIFIED ENGINE Model Emissions Certification Fuel Isuzu AM-4HK1X Cooled EGR Tier 4 Interim Requires ultra-low sulfur fuel B5 biodiesel tolerant
More information560E WHEEL LOADER. Net Horsepower 319 kw (427 hp) 5.35 m 3 to 11.5 m kg (92,549 lb) (7 yd 3 to 15 yd 3 )
560E WHEEL LOADER Net Horsepower 319 kw (427 hp) Bucket Capacity Operating Weight 5.35 m 3 to 11.5 m 3 41 980 kg (92,549 lb) (7 yd 3 to 15 yd 3 ) Big machine comfort and power with fast cycle times and
More informationCOMPACT WHEEL LOADER WA70-5. NET HORSEPOWER 45 kw rpm OPERATING WEIGHT kg 11,155-11,816 lb
NET HORSEPOWER 45 kw 60 HP @ 2350 rpm OPERATING WEIGHT 5060-5360 kg 11,155-11,816 lb WA70-5 BUCKET CAPACITY 0.85-1.25 m 3 1.1-1.6 yd 3 WA 70 COMPACT WHEEL LOADER Photos may include optional equipment.
More informationFrom World First to World Leader
HYDRAULIC EXCAVATOR TB280FR From World First to World Leader Product Features & Specifications ENGINE - U.S. EPA Final Tier 4 Compliant - Turbocharged - DOC+DPF Exhaust After Treatment - Automatic Fuel
More informationHyundai Shandong(HSD) Wheel Loader Opens Up the Future
STANDARD EQUIPMENT Electrical system Alternator, 55A Back up Alarm Batteries 2X 12V, 120Ah Gauge - Coolent temp - Fuel level - Brake Air pressure - TM temp. - TM oil pressure - Hour meter & volt meter
More informationLubricant and Coolant Capacity
Engine Isuzu AI-4HK1X Tier 3 turbocharged diesel engine with electronic fuel control, 153 Net HP (114 kw), 5.2 Liter displacement, 4-cylinder, water-cooled, EGR with cooler, air-toair intercooler, 24-volt
More informationEngine. Engine Torque. Weights. Steering. 924G Wheel Loader specifications
Engine Model Caterpillar 3056E DIT ATAAC Rated Net Power @ 2,300 rpm SAE J1349 96 kw 129 hp ISO 9249 97 kw 130 hp EEC 80/1269 97 kw 130 hp Maximum Net Power @ 1,900 rpm SAE J1349 102 kw 137 hp ISO 9249
More informationZL302C VOLVO COMPACT WHEEL LOADER
VOLVO COMPACT WHEEL LOADER ZL302C Gross Power: SAE J1995 22,5/31 kw/hp Net Power: SAE J1349 22/30 kw/hp Operating Weight: 2,1 t Bucket Capacities: 0,3-0,5 m 3 High-performance, low environmental impact
More informationCX80C EXCAVATOR DOZER BLADE TIER 4 FINAL CERTIFIED
CX80C EXCAVATOR DOZER BLADE TIER 4 FINAL CERTIFIED ENGINE Model Emissions Certification Fuel Type Cylinders Isuzu AP-4LE2X Tier 4 Final Requires ultra low-sulfur fuel B5 biodiesel tolerant Water-cooled,
More informationHYDRAULICS. Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (21 L/min) Relief pressure psi (3900 kpa)
9020B Excavator ENGINE Model... Case 4TA-390 Type... 4-stroke, turbocharged and aftercooled Cylinders... 4 Bore/Stroke... 4.02 x 4.72 (102 x 120 mm) Displacement... 239 in 3 (3.9 L ) Fuel injection...
More informationJCB LOADALL , , SPEC COMPACT TELESCOPIC HANDLERS
JCB LOADALL 520-40, 524-50, 527-55 SPEC COMPACT TELESCOPIC HANDLERS JCB LOADALL 520-40 MAX. PAYLOAD: MAX. LIFT HEIGHT: MAX. HORSEPOWER: 4000lb 13ft 3in 50hp B A JCB LOADALL 520-40 H D E C F G STATIC DIMENSIONS
More informationDimensions. Optional Equipment. MINI EXCAVATOR Applied Tier 2 Engine PLEASE CONTACT
Dimensions 1,650 986 Standard Equipment Working ranges ISO standard cabin Cabin ROPS(ISO 3471) FOPS(ISO 3449) TOPS(ISO 12117) All-weather steel cab with all-around visibility Safety glass windows Rise-up
More informationEC240 VOLVO EXCAVATOR. Engine power, gross: 134 kw 180 hp Operating weight: 23.5~24.3t ~ lb Buckets (SAE): 1050 ~ 1876 l 1.37 ~ 2.
VOLVO EXCAVATOR EC240 Engine power, gross: 134 kw 180 hp Operating weight: 23.5~24.3t 51820 ~ 53660 lb Buckets (SAE): 1050 ~ 1876 l 1.37 ~ 2.45 yd 3 Low-emission, turbocharged Cummins diesel engine with
More information350 MH. Material Handler
0 MH Material Handler The Cat 0 Material Handler is specifically designed for the scrap and material handling customer. This machine uses the most sophisticated manufacturing technology to ensure the highest
More informationEQUIPMENT ENGINE HYDRAULIC SYSTEM
EQUIPMENT ENGINE Model... Isuzu AI-4JJ1X Type... 4-cycle water-cooled, direct injection Aspiration... Turbocharged, intercooled No. of cylinders... 4 Rated power ISO 9249, net... 90.2 kw (121 HP) at 2
More informationPressure system with spin-on filter & cooler Dual-stage dry type with safety element and evacuator valve
Engine Manufacture and Model Non-Road Emission Standards Displacement Net Peak Power (ISO 9249) Net Peak Torque (ISO 9249) John Deere PowerTechTM4045T turbocharged, standard EPA Tier 2 / EU Stage II emissions
More information