EC240 VOLVO EXCAVATOR. Engine power, gross: 134 kw 180 hp Operating weight: 23.5~24.3t ~ lb Buckets (SAE): 1050 ~ 1876 l 1.37 ~ 2.

Transcription

1 VOLVO EXCAVATOR EC240 Engine power, gross: 134 kw 180 hp Operating weight: 23.5~24.3t ~ lb Buckets (SAE): 1050 ~ 1876 l 1.37 ~ 2.45 yd 3 Low-emission, turbocharged Cummins diesel engine with direct injection Integrated mode selection system and electronically controlled system (ACS) 2 variable displacement axial piston pumps. Independent and simultaneous movements of the digging equipment is controlled by the Automatic sensing work mode. Cab Ergonomic environment Low sound level Filtered air Hydraulic dampening mounts Rugged attachment, produced by robotic welding High lifting, breakout and tearout forces for tough digging conditions Long undercarriage for good stability Hammer/Shear and Volvo Quick Coupler Piping as standard equipment Prepared for a number of optional items

2 ENGINE The engine is a low-emission, turbocharged, 4-stroke diesel engine with water cooling, direct injection and aftercooler, especially developed for excavator use. The machine can work at any job site, contributing to good fuel economy, low sound level, less wear and a longer life. Air filter: 3-stage, includes pre-cleaner Automatic idling system: Reduces the engine speed to an idling speed when levers and pedals are not activated. Maker... CUMMINS Model... C8.3-C Power output at r/s 2000 rpm Net (ISO 9249/DIN 6271) kw 168 hp Gross (SAE J1349) kw 180 hp Max. torque N.m at 1500 rpm 553 lb..ft at 1500 rpm No. of cylinders... 6 Displacement l 505 cu.in Bore mm 4.49" Stroke mm 5.32" SWING SYSTEM The superstructure is swung by the means of an axial piston motor and a planetary reduction unit. Automatic swing holding brake and anti-rebound valve are standard. Max. swing speed rpm Max. swing torque kg.m lb.ft UNDERCARRIAGE The undercarriage has an X-shaped frame. The greased and sealed track chain is standard. No. of track pads... 2 x 51 Link pitch mm 7.5" Shoe width, triple grouser /700/800 (Std.)/900 mm 24"/28"/32"(Std.)/36" Shoe width, rubber pad mm 24" Shoe width, swamp mm 36" No. of lower track rollers... 2 x 9 No. of upper rollers... 2 x 2 ELECTRICAL SYSTEM Well-protected electrical system with high capacity. Double lock harness plugs are waterproof to ensure secure connections and prevent corrosion. The relays and solenoid valves are shielded to prevent accidental damage or terminal contact. The master switch, for disconnecting the battery, is standard. ACS system, providing integrated mode selection functions and self-diagnostic mode, is standard. Voltage V Batteries... 2 x 12 V Battery capacity Ah Alternator V / 50 A DRIVE Each track is powered by an automatic two speed travel motor. The track brakes are multi-disc, spring-applied and hydraulicreleased. The travel motor, brake and planetary gears are wellprotected in the track frame. Max. tractive effort kn lb Max. travel speed(1st/2nd) /5.5 km/h 2.0/3.4 mph Gradeability... 35º 70% SERVICE REFILL CAPACITIES Fuel tank l Hydraulic system, total l Hydraulic tank l Engine oil l Engine coolant l Swing reduction unit l Travel reduction unit... 2 x 5.2 l 92 gal 85 gal 50 gal 7gal 7gal 3gal 2x1.4gal

3 LIFTING CAPACITY (At the arm end without bucket) Note: For lift capacity including bucket, simply subtract actual weight of the pin on bucket or the bucket with quick coupler from the following values. EC240 (Std. shoe 800 mm, 32", Counterweight 4350 kg, 9590 lb) Across undercarriage Along undercarriage Lifting hook related to ground level m/ft 3m,10' 4.5 m, 15' 6m,20' 7.5 m, 25' Max.reach t lb t lb t lb t lb t lb t lb t lb t lb t lb t lb Max. m/ft Monobloc boom 6.0 m 19' 8" + Arm 2.0 m 6' 7" ' 6 20' ' 3 10' 1.5 5' 0 0' ' -3-10' *16.3 *35370 *16.3 * *9.7 * *13.7 * *12.3 * *7.1 *15630 *7.8 *17040 *8.9 * *7.3 *16250 *7.2 * / / / / / / / / 20.5 Monobloc boom 6.0 m 19' 8" + Arm 2.5 m 8' 2" ' 6 20' ' 3 10' 1.5 5' 0 0' ' -3-10' ' *9.5 *21790 *9.5 * *17.7 *38530 *14.2 *30510 *14.2 *30510 *8.8 *18900 *8.8 * *11.4 * *13.3 * * *12.9 * *10.4 *22100 * *6.5 *14260 *7.3 *15880 *8.5 * *6.5 *14440 *6.5 * *8.6 * / / / / / / / / / 16.9 Monobloc boom 6.0 m 19' 8" + Arm 2.97 m 9' 9" ' 6 20' ' 3 10' 1.5 5' 0 0' ' -3-10' ' *10500 *10500 *9.7 *22010 *9.7 *22010 * *16.1 *36740 *15.8 *34090 *15.8 *34090 *7.9 *16970 *7.9 * *10.5 * *12.7 * * *13.3 * *11.3 *24360 *5.9 * *5.9 *12920 *6.8 *14670 *8.0 * *6.2 * *5.5 * *5.5 *12190 *5.3 *11610 *5.3 * *8.4 * / / / / / / / / / 18.9 Monobloc boom 6.0 m 19' 8" + Arm 3.6 m 11' 10" ' 6 20' ' 3 10' 1.5 5' 0 0' ' -3-10' ' *14.9 *31540 *14.9 *31540 *6.4 *14710 *6.4 *14710 *9.8 *22280 *9.8 *22280 *14.6 *33050 *14.6 * *17.6 *37990 *9.3 *19960 *9.3 * *11.8 * *13.4 * * *12.3 *26530 *6.0 * *6.0 *13150 *7.3 *15830 *8.6 * *5.3 *11720 *5.7 *12490 *6.4 * *4.6 * *4.6 *10180 *4.5 *9850 *4.5 *9940 *4.7 * / / / / / / / / / 21.2 Notes: 1. Machine in Fine Mode F (Power Boost), for lift capacities. 2. The above loads are in compliance with SAE and ISO Hydraulic Excavator Lift Capacity Standards. 3. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. 4. Rated loads marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load 5. Contains metric and U.S. measurement charts.

4 DIMENSIONS L A D M E C F K G H J I B Boom Std. 6.0 m, 19' 8" unit Dipper arm 2.0 m, 6' 7" 2.5 m, 8' 2" Std m, 9' 9" 3.6 m, 11' 10" A. Overall width of upper structure mm, ft-in 2840, 9' 4" 2840, 9' 4" 2840, 9' 4" 2840, 9' 4" B. Overall width mm, ft-in 3390, 11' 1" 3390, 11' 1" 3390, 11' 1" 3390, 11' 1" C. Overall height of cab mm, ft-in 2990, 9' 10" 2990, 9' 10" 2990, 9' 10" 2990, 9' 10" D. Tail swing radius mm, ft-in 3000, 9' 10" 3000, 9' 10" 3000, 9' 10" 3000, 9' 10" E. Overall height of exhaust pipe mm, ft-in 2600, 8' 6" 2600, 8' 6" 2600, 8' 6" 2600, 8' 6" F. Counterweight clearance* mm, ft-in 1080, 3' 7" 1080, 3' 7" 1080, 3' 7" 1080, 3' 7" G. Tumbler length mm, ft-in 3850, 12' 8" 3850, 12' 8" 3850, 12' 8" 3850, 12' 8" H. Track length mm, ft-in 4650, 15' 3" 4650, 15' 3" 4650, 15' 3" 4650, 15' 3" I. Track gauge mm, ft-in 2590, 8' 6" 2590, 8' 6" 2590, 8' 6" 2590, 8' 6" J. Shoe width-std. mm, in 800, 32" 800, 32" 800, 32" 800, 32" K. Min. ground clearance* mm, ft-in 480, 1' 7" 480, 1' 7" 480, 1' 7" 480, 1' 7" L. Overall length mm, ft-in 10295, 33' 9" 10250, 33' 8" 10170, 33' 4" 10245, 33' 7" M. Overall height of boom mm, ft-in 3350, 11' 0" 3220, 10' 7" 3040, 10' 0" 3230, 10' 7" * Without shoe grouser

5 DIMENSIONS Boom Height Description Std. 6.0 m, 19' 8" Heavy duty Length 6210 mm, 20' 4" 6210 mm, 20' 4" Height 1630 mm, 5' 4" 1630 mm, 5' 4" Length Width 730 mm, 2' 5" 730 mm, 2' 5" Weight * 1980 kg, 4370 lb 2130 kg, 4700 lb * Includes cylinder, pin and piping Arm 2.0 m, 6' 7" Std m, 9' 9" Height Height Length Length 2.5 m, 8' 2" 3.6 m, 11' 10" Height Height Length Length Description 2.0 m, 6' 7" 2.5 m, 8' 2" 2.97 m, 9' 9" Std. Heavy duty 3.6 m, 11' 10" Length 3030 mm, 9' 11" 3590 mm, 11' 9" 4060 mm, 13' 4" 4060 mm, 13' 4" 4730 mm, 15' 6" Height 1010 mm, 3' 4" 930 mm, 3' 1" 920 mm, 3' 0" 920 mm, 3' 0" 920 mm, 3' 0" Width 480 mm, 1' 7" 480 mm, 1' 7" 480 mm, 1' 7" 480 mm, 1' 7" 480 mm, 1' 7" Weight * 1010 kg, 2230 lb 1110 kg, 2450 lb 1180 kg, 2600 lb 1250 kg, 2760 lb 1250 kg, 2760 lb * Includes cylinder, piping and linkage

6 WORKING RANGES A B H F G C D E Std. 6.0 m, 19' 8" boom with pin on bucket Dipper arm unit 2.0 m, 6' 7" 2.5 m, 8' 2" Std m, 9' 9" 3.6 m, 11' 10" A. Max. digging reach mm, ft-in 9550, 31' 4" 9880, 32' 5" 10260, 33' 8" 10730, 35' 2" B. Max. digging reach on ground mm, ft-in 9360, 30' 9" 9690, 31' 9" 10080, 33' 1" 10560, 34' 8" C. Max. digging depth mm, ft-in 6060, 19' 11" 6500, 21' 4" 6980, 22' 11" 7600, 24' 11" D. Max. digging depth (8' level) mm, ft-in 5780, 19' 0" 6280, 20' 7" 6740, 22' 1" 7380, 24' 3" E. Max. vertical wall digging depth mm, ft-in 4960, 16' 3" 5730, 18' 10" 5970, 19' 7" 6270, 20' 7" F. Max. cutting height mm, ft-in 9660, 31' 8" 9630, 31' 7" 9730, 31' 11" 9670, 31' 9" G. Max. dumping height mm, ft-in 6720, 22' 1" 6670, 21' 11" 6800, 22' 4" 6790, 22' 3" H. Min. front swing radius mm, ft-in 4030, 13' 3" 3860, 12' 8" 3830, 12' 7" 3850, 12' 8" Digging forces with pin on bucket: unit 2.0 m, 6' 7" 2.5 m, 8' 2" Std m, 9' 9" 3.6 m, 11' 10" Bucket tip radius mm, in 1540, 61" 1540, 61" 1540, 61" 1540, 61" Breakout force-bucket kn / / / / (Normal / Power boost) SAE lb / / / / Tearout force-arm kn / / / / (Normal / Power boost) SAE lb / / / / Rotation angle, bucket º 167º 182º 182º 182º

7 GROUND PRESSURE Machine with Std. 6.0 m, 19' 8" boom, Std m, 9' 9" arm, 920 kg, 2030 lb bucket and 4350 kg, 9590 lb counterweight. Description Triple grouser Rubber pad Swamp shoe Shoe width Operating Ground Overall weight pressure width 600 mm kg 46.1 kpa 3190 mm 24" lb 6.7 psi 10' 6" 700 mm kg 40.2 kpa 3290 mm 28" lb 5.8 psi 10' 10" Std. 800 mm kg 35.3 kpa 3390 mm Std. 32" lb 5.1 psi 11' 2" 900 mm kg 32.4 kpa 3490 mm 36" lb 4.7 psi 11' 5" 600 mm kg 47.1 kpa 3190 mm 24" lb 6.8 psi 10' 6" 900 mm kg 31.4 kpa 3500 mm 36" lb 4.6 psi 11' 6"

8 BUCKET & ARM COMBINATION Note: Bucket size based on SAE-J296, heaped material with a 1:1 angle of repose. Max. permitted sizes for pin on buckets Counterweight: 4350 kg, 9590 lb Description unit 2.0m, 6' 7" Arm 2.5m, 8' 2" Arm Std. 2.97m, 9' 9" Arm 3.6m, 11' 10" Arm GP bucket 1.5 t/m 3, 2530 lb/yd 3 l, yd , , , , 1.99 GP bucket 1.8 t/m 3, 3030 lb/yd 3 l, yd , , , , 1.73 RB bucket 1.8 t/m 3, 3030 lb/yd 3 l, yd , , , , 1.60 RB bucket 2.0 t/m 3, 3370 lb/yd 3 l, yd , , , , 1.47 Max. permitted sizes for hook on buckets Counterweight: 4350 kg, 9590 lb Description unit 2.0m, 6' 7" Arm 2.5m, 8' 2" Arm Std. 2.97m, 9' 9" Arm 3.6m, 11' 10" Arm GP bucket 1.5 t/m 3, 2530 lb/yd 3 l, yd , , , , 1.86 GP bucket 1.8 t/m 3, 3030 lb/yd 3 l, yd , , , , 1.60 RB bucket 1.8 t/m 3, 3030 lb/yd 3 l, yd , , , , 1.50 RB bucket 2.0 t/m 3, 3370 lb/yd 3 l, yd , , , , 1.37

9 HYDRAULIC SYSTEM The hydraulic system, named Automatic Sensing Work Mode, is designed for high productivity, high digging capacity, high maneuvering precision and good fuel economy. The summation system, boom priority, arm priority, swing priority, and regeneration system of the boom and arm flow are provided for the best operation. The following important functions are included in the system; Summation system: Providing full use of the pump oil flow. Boom priority: Supplying priority to the boom operation for fast raising during loading or deep excavation. Arm priority: Providing priority to the arm operation for faster cycle times during leveling and for increased bucket filling factors while digging. Swing priority: supplying priority to the swing operation for faster swing during simultaneous operations. Regeneration system: Enhancing the cylinder life cycle, preventing cavitation and providing priority to other movements during simultaneous operations. Power boost: All digging and lifting forces are increased. Holding valves: Boom and arm holding valves are standard. CAB Easily accessible cab with a wide door and lined with soundabsorbing material. The cab, which is supported by hydraulic dampening mounts to reduce shock and vibration, has all-around visibility. The front windshield can slide up into the ceiling and the lower front glass can be removed. Integrated air-conditioning and heating system: The pressurized and filtered cab air is supplied by a 4-speed fan. The air is distributed via 8 vents. Ergonomic operator s seat: The adjustable seat and control consoles move independently to accommodate the operator well. The seat has eight different adjustments and a seat belt to meet any operator s requirement. Sound level: Approved according to the Directive 86/662/EEC. Exterior noise (ISO 6395) mean value of LWA (sound power level) 104 db(a) Operator s position (ISO 6396) with the door closed mean value of LPA (sound pressure level) 78 db(a) Pumps Main pump: Type... 2 x variable displacement axial piston pumps Maximum flow... 2 x 230 l/min 2x61gpm Pilot pump: Type... Gear pump Maximum flow l/min 5.3 gpm Hydraulic motors Travel... Variable displacement axial piston motor Swing... Fixed displacement piston motor with mechanical brake Relief valve setting Attachment /34.3 MPa 4550/4980 psi Travel circuit MPa 4980 psi Swing circuit MPa 3840 psi Pilot circuit MPa 570 psi Hydraulic cylinders Boom... 2 bore x stroke... Ø 135 mm x 1345 mm Ø 5.3" x 53.0" Arm... 1 bore x stroke... Ø 140 mm x 1665 mm Ø 5.5" x 65.6" Bucket... 1 bore x stroke... Ø 130 mm x 1120 mm Ø 5.1" x 44.1" Bucket, extra short arm.. 1 bore x stroke... Ø 135 mm x 1065 mm Ø 5.3" x 41.9"

10 Engine Low-emission engine with air heater, complying with EPA emission standards 3-stage air filter with indicator Electric engine shut-off Fuel filter and water separator Pre-cleaner Alternator, 50 AMP Electronic control system Advanced control system (ACS) Integrated mode selection system Self-diagnostic system Automatic idling system One-touch power boost Automatic engine warm-up Safety stop/start function Adjustable monitor Master disconnect switch Engine restart prevention circuit Powerful halogen lights: - Frame mounted 2 - Boom mounted 2 Batteries 2 x 12V/200Ah Start motor 24V/7.5kW Travel alarm STANDARD EQUIPMENT Hydraulic system Automatic sensing work mode - Summation system - Boom priority -Armpriority -Swingpriority Boom and arm flow regeneration Swing anti-rebound valve Boom and arm holding valves Pilot-operated, wrist control joysticks, with 3 switches ea. Multi-stage filtering system Cylinder cushions Cylinder contamination seals Auxiliary hydraulic valve Straight travel circuit Volvo Quick coupler piping Hammer/shear piping, w/1pumpflow Automatic two speed travel motors Hydraulic oil ISO VG 46 Superstructure Access way with handrail Full height counterweight kg, 9590 lbs Tool storage area Punched metal anti-slip plates Cab and interior Air-conditioner Heater Hydraulic dampening cab mounts Adjustable operator seat and control console Flexible antenna Hydraulic safety lock lever Cab, all-weather sound suppressed, includes: - Ashtray -Cigarlighter - Clear tinted roof hatch -Doorlocks - Fabric seat with heater - Floor mat -Horn - Large storage area - Pull-up type front window - Removable lower windshield - Seat belt -Safetyglass - Sliding rear window - Sun shield, front - Windshield wiper with intermittent feature Master Ignition key Stereo cassette radio (AM/FM) Vandal guard preparation Undercarriage Hydraulic track adjusters Greased and sealed track chain Track guides Track shoes Std. track shoes 800 mm, 32" with triple grousers Attachment Std. boom: 6.0 m, 19' 8" Std. arm: 2.97 m, 9' 9" Engine Alternator, 70 AMP Block heater: 110V AC Fuel warmer Tropical kit Fuel filler pump: 50 lpm (13.2 gpm), with automatic shut-off Electronic control system Extra lamps on the cab 4 Rotating warning beacon OPTIONAL EQUIPMENT Hydraulic system Hydraulic piping - Rotate & tilt -Grapple - Oil leak line 2 pump flow for hammer/shear Additional return filter Volvo hydraulic quick coupler S2 size Hydraulic oil ISO VG 32 Hydraulic oil ISO VG 68 Superstructure Undercover (heavy duty) Cab and interior Fabric seat Fabric seat, with heater and air suspension Control joystick, with 5 switches ea. Falling object guard (FOG) Cab mounted falling object protective structures (FOPS) Rain shield, front Safety screen for front window Vandalism kit Undercarriage Full track guides Undercover (heavy duty) Track shoes 600 mm / 700 mm / 900 mm 24" / 28" / 36" track shoes with triple grousers 600 mm, 24" rubber pads 900 mm, 36" swamp shoes Attachment Boom: 6.0 m, 19' 8" heavy duty Arms:2.0m/2.5m/3.6m 6' 7" / 8' 2" / 11' 10" 2.97 m, 9' 9" heavy duty Service Tool kit *Specifications may vary by the region without notice. *All materials contained within are confidential to Volvo Construction Equipment Korea Ltd. and may not be copied without the pre-approval of Volvo CE NA. *Materials and specifications are subject to change without notice. Under our policy of continuous improvement, we reserve the right to change specifications and design without prior notice. The illustrations do not necessarily show the standard version of the machine. Volvo Construction Equipment North America Inc. One Volvo Drive, Asheville, N.C Telephone: Ref. No Printed in USA 03/00 10,0 Biltmore Press, Asheville, NC KOR