Data Sheets. Cable Drums 2 Safety Windings

Size: px
Start display at page:

Download "Data Sheets. Cable Drums 2 Safety Windings"

Transcription

1 Data Sheets Cable Drums 2 Safety Windings

2

3 : Drum NL-12. Standard Lift 2-SW. Physical Drum Specifi cations Maximum doorweight Shaft diameter 500 kg ø5 mm ø25.4 mm 67 mm 1 kg Length of the cable wraps ø4 cable Maximum door height 3680 mm 740 mm 58.2 mm Total revolutions of spiral 1.25 Cable capacity of spiral 440 mm 2.75 mm Total revolutions of fl at part 9.75 Cable capacity of fl at part 3240 mm Flat moment arm 52,8 mm Circumference of the fl at portion mm Total wraps mm Locking bolt radial DIN 916 M8 x 20mm Locking bolt under angle from the side No Max torque bolts 15 N/m Calculation of cable length standard lift: Distance floor to the center shaft + value table + cable length bottom. 740 mm 820 mm

4 : Drum NL-18. Standard Lift 2-SW. Physical Drum Specifi cations Maximum doorweight Shaft diameter 500 kg ø5 mm ø25.4 mm 86 mm 1.6 kg Maximum door height 5570 mm 940 mm 74.7 mm Total revolutions of spiral 1 Cable capacity of spiral 450 mm 5.5 mm Total revolutions of fl at part Cable capacity of fl at part 5120 mm Flat moment arm 69.2 mm Circumference of the fl at portion mm Total wraps mm Locking bolt radial DIN 916 M8 x 20mm Locking bolt under angle from the side No Max torque bolts 15 N/m Calculation of cable length standard lift: Distance floor to the center shaft + value table + cable length bottom. 940 mm 1040 mm

5 : Drum NL-32. Standard Lift 2-SW. 3/8 ~10mm Physical Drum Specifi cations Maximum doorweight 700 kg ø6 mm Shaft diameter ø25.4 mm ø 31.8 mm 127 mm Shipping weight per pair 5.2 kg Maximum door height mm 1370 mm mm Total revolutions of spiral 1 Cable capacity of spiral 670 mm 4.8 mm Total revolutions of fl at part 14.5 Cable capacity of fl at part 9505 mm Flat moment arm mm Circumference of the fl at portion 655 mm Total wraps mm Max torque Locking bolt radial DIN 916 M8 x 20mm 15 N/m Locking bolt under angle from the side 3/8 x 38mm 20 N/m Calculation of cable length standard lift: Distance floor to the center shaft + value table + cable length bottom mm 1510 mm

6 : Drum HL-120. High Lift 2-SW. Physical Drum Specifi cations Maximum doorweight HL<2500 Maximum doorweight HL>2500 Shaft diameter Maximum high lift 3060 mm Maximum door height in case HL>1370mm* 5050 mm 1460 mm mm Total revolutions of spiral 5 Cable capacity of spiral mm Total revolutions of fl at part 7.75 Cable capacity of fl at part 3680 mm Flat moment arm 75.5 mm Circumference of the fl at portion mm Total wraps mm * In case HL = 3060 (=max). max doorheight = = 6740mm. Locking bolt radial DIN 916 Locking bolt under angle from the side Max torque bolts 500 kg 450 kg ø5 mm ø25.4 mm 127 mm 2.8 kg M8 x 20mm No 15 N/m Calculation of cable length high lift: Distance floor to the center shaft + value table - high lift + cable length bottom mm 4660 mm

7 : Drum HL-164. High Lift 2-SW. 3/8 ~10mm Physical Drum Specifi cations Maximum doorweight HL< kg Maximum doorweight HL> kg ø6 mm Shaft diameter ø25.4 mm ø31.8 mm 152 mm 6 kg Maximum high lift 4100 mm Maximum door height in case HL>230mm* 6000 mm 1725 mm 136 mm Total revolutions of spiral 6 Cable capacity of spiral mm Total revolutions of fl at part 11 Cable capacity of fl at part 5775 mm Flat moment arm 83.5 mm Circumference of the fl at portion 525 mm Total wraps mm * In case HL = 4100 (=max). max doorheight = = 9875mm. Max torque Locking bolt radial DIN 916 M8 x 20mm 15 N/m Locking bolt under angle from the side 3/8 x 38mm 20 N/m Calculation of cable length high lift: Distance floor to the center shaft + value table - high lift + cable length bottom mm 6015 mm

8 : Drum HL-54. High Lift 2-SW. Physical Drum Specifi cations Maximum doorweight HL Shaft diameter Maximum high lift 1370 mm Maximum door height in case HL>230mm* 4800 mm 1150 mm mm Total revolutions of spiral 2.75 Cable capacity of spiral 1370 mm 8 mm Total revolutions of fl at part 10.5 Cable capacity of fl at part 4570 mm Flat moment arm 69.2 mm Circumference of the fl at portion mm Total wraps mm * In case HL = 1370 (=max). max doorheight = = 5940mm. 500 kg ø5 mm ø25.4 mm 111 mm 2 kg Locking bolt radial DIN 916 Locking bolt under angle from the side Max torque bolts M8 x 20mm No 15 N/m Calculation of cable length high lift: Distance floor to the center shaft + value table - high lift + cable length bottom mm 2650 mm

9 : Drum VL-11. Vertical Lift 2-SW. Physical Drum Specifi cations Maximum doorweight Shaft diameter 500 kg ø5 mm ø25.4 mm 111 mm 1.8 kg Maximum door height 3300 mm 1325 mm mm Total revolutions of spiral 7.5 Cable capacity of spiral 3300 mm mm Low moment arm 34.2 mm Total wraps mm Extra cable capacity for run out 120 mm Locking bolt radial DIN 916 M8 x 16mm Locking bolt under angle from the side No Max torque bolts 15 N/m Calculation of cable length vertical lift: Distance floor to the center shaft + value table - doorheight + cable length bottom mm 4785 mm

10 : Drum VL-18. Vertical Lift 2-SW. Physical Drum Specifi cations Maximum doorweight VL < kg Maximum doorweight VL > kg ø5 mm Shaft diameter ø25.4 mm ø31.8 mm 152 mm 3.9 kg Maximum door height 6000 mm 1745 mm 139 mm Total revolutions of spiral 11 Cable capacity of spiral 6000 mm mm Low moment arm 34.2 mm Total wraps mm Extra cable capacity for run out 120 mm Locking bolt radial DIN 916 Locking bolt under angle from the side Max torque bolts M8 x 16mm No 15 N/m Calculation of cable length vertical lift: Distance fl oor to the center shaft + value table - doorheight + cable length bottom mm 7955 mm

11 Calculation of cable length Cable length bottom Value Bottom corner bracket mm Cable break device mm Cable break device mm Cable break device mm Other - Standard Lift: Distance floor to the center shaft + value table + cable length bottom. Example: Doorheight = 3200mm Distance floor to center shaft = 3548mm. Bottom corner brackert Drum = 4728 mm High Lift: Distance floor to the center shaft + value table - high lift + cable length bottom. Example: Doorheight=3000mm. High lift = 1000mm.. Cable break device Distance floor to center shaft = 4183 Drum = 8053 mm. Vertical Lift: Distance floor to the center shaft + value table - doorheight + cable length bottom. Example: Doorheight=3000mm.. Cable break device Distance floor to center shaft = 6103 Drum = 7988 mm.

12 DOCO International B.V. Nusterweg KV Sittard The Netherlands Phone Fax DOCO International Southern Europe S.L.U Avenida Generalitat 55 P.I. Can Met Sidru La Garriga - Barcelona Spain Phone Fax ventas@doco-international.com DOCO International Ltd. Unit B3. Elvington Industrial Estate Elvington York YO41 4AR United Kingdom Phone Fax sales@doco-international.co.uk For your Residential and Industrial door solutions: DOCO International Central Europe S.R.O. Háj Kralice na Hané Czech Republic Phone Fax info@doco-international.com A company of the SOMMER Group

Spring break device. Sep-10

Spring break device. Sep-10 EN Spring break device Sep-10 Installation manual 1. Symbols and warning notices Danger Attention 2. General warning notices This installation manual is intended for suitably qualified staff and not for

More information

HOME-F Installation Manual

HOME-F Installation Manual HOME-F Installation Manual HOME-F Installation Manual ontents 1 Symbols...3 2 General warnings...3 2.1 Safety requirements for assembly and first use...3 3 Terms and conditions...3 4 Area of application...4

More information

Spring break device

Spring break device Spring break device 052010 IMPORTANT: Tensioned springs carry a high tension; always be very careful, especially when adjusting, and use tensioning rods (12025) of the right size and that are well maintained.

More information

Installation Manual Sectional door with rear springs (LF 70) Conform TÜV / CE EN

Installation Manual Sectional door with rear springs (LF 70) Conform TÜV / CE EN Installation Sectional door with rear springs (LF 70) Conform TÜV / CE EN 13241-1 UK Contents 1 Symbols and warning signs 3 2 General warnings 3 2.1 Safety requirements for assembly, first use and maintenance

More information

No. 41 Summer GIGAsedo: Successful market launch of our industrial door operators. New products and advancements

No. 41 Summer GIGAsedo: Successful market launch of our industrial door operators. New products and advancements No. 41 Summer 2014 GIGAsedo: Successful market launch of our industrial door operators New products and advancements INSIDE SOMMER: The Quality Assurance Department SOMMER: Trade show review 2013 ENTRAsys

More information

GMS 32. Double flank testing machine for gears

GMS 32. Double flank testing machine for gears GMS 32 Double flank testing machine gears Specifications max. diameter of measured gear 100 mm (4'') max. diameter of master gear 80 mm center distance 0... 90mm max. weight of gear 0.5 kg max. testing

More information

Cable break device. Cable break device. Cable break device 9.1

Cable break device. Cable break device. Cable break device 9.1 9 9 25350 Max. cable Ø Cable break device : Pair : 1.04 kg with plastic cover : Cable break device for residential doors max. 170kgs. Only suitable for Doco tracks. Supplied with orange safety cover. TÜV

More information

Telescopic Springs.

Telescopic Springs. Telescopic Springs This project shall be co-fi nanced by the European Fund for Regional Development and by the Ministry of Trade and Industry. DIN EN ISO 9001:2000 Zertifikat: 01 100 035105 HESTEGO s.

More information

Bevel gearboxes. KSZ and KGZ Advantages. Same mounting height no support plates required. Suitable for standard motor flanges

Bevel gearboxes. KSZ and KGZ Advantages. Same mounting height no support plates required. Suitable for standard motor flanges KSZ and KGZ Advantages Same mounting height no support plates required Screw jack gearboxes ZIMM bevel gearboxes KSZ and KGZ have the same installation height as the ZIMM screw jack gearbox. No support

More information

Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects

Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects 09.2007 / a 4183 en - 03.2008 / b Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects www.leroy-somer.com Drive systems

More information

Slip-ring motors MAR Series

Slip-ring motors MAR Series Slip-ring motors MAR Series ABOUT US DAC Electric is a fairly young but highly experienced combination of professionals from all over the world. The founders, from the Netherlands and the Czech Republic,

More information

Europe. Your motors within 15 business days SPÉCIALISTE MONDIAL DE LA TRANSMISSION HYDROSTATIQUE WORLD-LEADING SPECIALIST IN HYDROSTATIC TRANSMISSIONS

Europe. Your motors within 15 business days SPÉCIALISTE MONDIAL DE LA TRANSMISSION HYDROSTATIQUE WORLD-LEADING SPECIALIST IN HYDROSTATIC TRANSMISSIONS Europe Your motors within 15 business days 15 SPÉCIALISTE MONDIAL DE LA TRANSMISSION HYDROSTATIQUE WORLD-LEADING SPECIALIST IN HYDROSTATIC TRANSMISSIONS PHast Europe is a fast delivery service for MS range

More information

FHA-C Mini Servo Actuators with Multi-turn Absolute Encoder

FHA-C Mini Servo Actuators with Multi-turn Absolute Encoder FHA-C Mini Servo Actuators with Multi-turn Absolute Encoder Robotics and Automation Machine tools Semiconductor technology Medical Packaging machines Special environments Our inspiration Your business

More information

NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE EUROPEAN UNION 1 Q1 2015

NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE EUROPEAN UNION 1 Q1 2015 NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE Q1 2015 ALTERNATIVE FUEL VEHICLE registrations: +28.8% in in first quarter In the first quarter of 2015, total alternative fuel vehicle (AFV) registrations

More information

NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE EUROPEAN UNION 1 Q2 2015

NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE EUROPEAN UNION 1 Q2 2015 NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE Q2 2015 New alternative fuel vehicle (AFV) registrations in the EU by engine type Q2 2014 Q2 2015 Thousand units 70 60 50 40 30 20 10 0 EVs HEVs AFVs other

More information

PRODUCT CATALOGUE CHILLED WATER CASSETTE CWC

PRODUCT CATALOGUE CHILLED WATER CASSETTE CWC PRODUCT CATALOGUE CHILLED WATER CASSETTE CWC English/09-2003 CHILLED WATER CASSETTE! INTRODUCTION TO THE RANGE The units are available in the following versions:! 2 pipes! 2 pipes - 2 wires (electrical

More information

TGB GROUP TECHNOLOGIES

TGB GROUP TECHNOLOGIES TGB GROUP TECHNOLOGIES SLEWING DRIVES CATALOGUE YOU CALL, WE PRODUCE TGB Group Technologies With over 20 years of experience in bearings, gears and power transmission, the TGB Group has become a global

More information

TRANSMISSIONS. Mechanical Power Transmission

TRANSMISSIONS. Mechanical Power Transmission TRANSMISSIONS Mechanical Power Transmission Dunlop BTL Ltd European Distribution Centre MPT House Brunswick Road Cobbs Wood Industrial Estate Ashford, Kent. UK TN23 1EL Contact us +44 (0)1233 663340 +44

More information

Operation and Maintenance Manual

Operation and Maintenance Manual Operation and Maintenance Manual Piston Actuated Air Operated Valve for c1s/c2s/o1s/o2s model operators 10V SW 10SM 20SM 30VM 40VM 60VM 100VM 150V series valves Parker Autoclave Engineers Instrumentation

More information

SIRIOCOPT. A new handle that changes everything.

SIRIOCOPT. A new handle that changes everything. SIRIOCOPT A new handle that changes everything www.saf-fro.com SIRIOCOPT SIRIOCOPT is the new ergonomic and innovative cutting blowpipe designed and produced by our Verona Plant. This patented design makes

More information

Product Catalogue ARMONIA Providing indoor climate comfort

Product Catalogue ARMONIA Providing indoor climate comfort Product Catalogue ARMONIA Providing indoor climate comfort ARMONIA 1,3-11 kw Water cassette Main applications Light commercial buildings Offi ces Shops General description Why this choice? Silent operation

More information

A LEADING MANUFACTURER IN LINEAR MOTION GERALD SUMMERS is now an authorised distributor of Rollon TEL: 0800 055 6663 E-MAIL: SALES@GERALD-SUMMERS.CO.UK WWW.GERALD-SUMMERS.CO.UK CURVILINE www.rollon.com

More information

IPVP High-pressure Internal Gear Pumps for Variable Speed Drives

IPVP High-pressure Internal Gear Pumps for Variable Speed Drives IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Design and Function 7 6 5 9 2 5 6 7 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing

More information

Auxiliary valves PLC series Direct-acting pressure relief valves

Auxiliary valves PLC series Direct-acting pressure relief valves uxiliary valves LC series Direct-acting pressure relief valves Catalogue HY17-872/UK ugust 25 Catalogue HY17-872/UK Contents LC series List of contents age General Information... 3 LC53... Single housing

More information

NI PS-15/16/17 Side Mount Brackets

NI PS-15/16/17 Side Mount Brackets INSTALLATION GUIDE NI PS-15/16/17 Side Mount Brackets This document provides the installation procedure for the NI PS-15/16/17 Side Mount Brackets. This accessory is used to mount NI PS-15/16/17 power

More information

Piston Pumps Series P2 / P3 Variable Displacement

Piston Pumps Series P2 / P3 Variable Displacement Piston Pumps Series P2 / P3 Variable Displacement Catalogue HY11-2600/UK July 2003 Contents Series P2/P3 Description Technical information 3 Ordering code 4 Control options LA and LB 6 Control options

More information

IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet

IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet Design and Function 7 6 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b

More information

HIGH EFFICIENCY INDUCTION MOTORS COMBROHEF001_=

HIGH EFFICIENCY INDUCTION MOTORS COMBROHEF001_= COMBROHEF001_= HIGH EFFICIENCY INDUCTION MOTORS High efficiency induction motors General specifications Rated outputs and efficiency values are in accordance with IEC 60034-30-1 all parameters are measured

More information

FlexLink enclosure system

FlexLink enclosure system FlexLink enclosure system F I R S T C H O I C E F O R E A S I E R AUTOMATION Don t spend your resources We have already done this for Keep your production safe with the FlexLink standard enclosure system.

More information

BSERIES. Helicalbevel GearReducers

BSERIES. Helicalbevel GearReducers Helicalbevel GearReducers Features The technological content of B-Series gear reducers allows for an extraordinary performance/lifespan ratio. These highly versatile gear units are successfully used in

More information

Ground Fault Cable Retractor GR900 Series Service Manual

Ground Fault Cable Retractor GR900 Series Service Manual AERO-MOTIVE COMPANY A Woodhead Industries, Inc. Subsidiary Ground Fault Cable Retractor GR900 Series Service Manual IMPORTANT SAFETY INSTRUCTIONS Please read this manual carefully and follow its instructions.

More information

Mobile Hydraulics Solutions

Mobile Hydraulics Solutions Mobile Hydraulics Solutions Fan Drives Hydraulically Driven Lube Oil PTO Gear Pumps KP Asphalt Gear Pumps BTH 1 Mobile Hydraulics Solutions Content 2 Hydraulic motors KM 3-19 Fan drives 3 KM 1 space optimized

More information

Installation Manual SRR-70

Installation Manual SRR-70 Installation Manual SRR-70 Contents 1. Symbols 3 2. General warnings 3 2.1 Safety requirements for assembly and first use 3 3. Terms and conditions 3 4. Area of application 3 5. Guidelines 4 6. Fixing

More information

Product Group: Date Issued: Service Bulletin No. Rollers. Item No. 1 MRH601LEVERKIT Travel Lever 1

Product Group: Date Issued: Service Bulletin No. Rollers. Item No. 1 MRH601LEVERKIT Travel Lever 1 Service Bulletin MRH601DS Travel Lever Replacement Product Group: Date Issued: Service Bulletin No. Rollers Bulletin Type X Mandatory Information Only Recommended Change 11/17/14 VR20140813 Models/Series

More information

ALLROUNDER 720 A Multi-component

ALLROUNDER 720 A Multi-component Facts and figures ALLROUNDER 72 A Multi-component Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit: 8, 13, 21 horizontal 7, 17, 29, 4 vertical www.arburg.com 72 A Multi-component

More information

Manual Industrial System Configurator

Manual Industrial System Configurator Manual Industrial System Configurator V1 Start-up Selected your Language (currently only English) Navigation bar i: Click here for more information (if available) In this part you can see the configuration

More information

S8V POWER SUPPLIES. High capacity in a compact format. » Long life switch mode power supplies. » performance and reliability

S8V POWER SUPPLIES. High capacity in a compact format. » Long life switch mode power supplies. » performance and reliability S8V POWER SUPPLIES High capacity in a compact format» performance and reliability» Long life switch mode power supplies» Complete single and 3 - phase ranges All the power to suit your needs... Our S8V

More information

ALLROUNDER 520 A multi-component

ALLROUNDER 520 A multi-component Facts and figures ALLROUNDER 52 A multi-component Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit: 29, 4, 8 horizontal 7, 17, 29 vertical www.arburg.com 52 A multi-component

More information

UNILINE www.motiontech.com.au bout Rollon Development of global business Continual expansion and optimization of the portfolio 1975 Parent company, Rollon S.r.l., founded in Italy 1991 Founding of Rollon

More information

About Us HAAS Tooling for CNC Turning Centers

About Us HAAS Tooling for CNC Turning Centers About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.

More information

Spare Parts List Series VP04 Pneumatic Remote Control Valve

Spare Parts List Series VP04 Pneumatic Remote Control Valve Pneumatic Remote Control Valve Publication No HY17-8820/UK July 2004 Conversion factors 1 kg = 2.2046 lb 1 N = 0.22481 lbf 1 bar = 14.04 psi 1 l = 0.21997 UK gallon 1 l = 0.26417 US gallon 1 cm = 0.061024

More information

ALLROUNDER 720 S Multi-component

ALLROUNDER 720 S Multi-component Facts and figures ALLROUNDER 72 S Multi-component Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit: 13, 21, 32 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 72 S Multi-component

More information

Beef Markets Outlook. January Mark Zieg. Growing the success of Irish food & horticulture. Growing the success of Irish food & horticulture

Beef Markets Outlook. January Mark Zieg. Growing the success of Irish food & horticulture. Growing the success of Irish food & horticulture Beef Markets Outlook January 213 Mark Zieg AIDAN COTTER CHIEF EXECUTIVE BORD BIA 28 JANUARY 29 Irish Beef Markets Exports 444, Export Volumes by Destination (212) UK 231, Spain 11, France 46, Holland 36,

More information

Products and solutions for photovoltaic applications

Products and solutions for photovoltaic applications Products and solutions for photovoltaic applications Components for string and interface control panels Switch disconnectors Surge protection devices Fuse holders The range of LOVATO Electric components

More information

High efficiency induction motors

High efficiency induction motors High efficiency induction motors Technical data Type Power Speed Efficiency Power factor Current Rated current Breakdown Sound pressure level Moment of Inertia η cosφ I n T n I s /I n T s T max L pa J

More information

Facts and figures MULTILIFT SELECT 6

Facts and figures MULTILIFT SELECT 6 Facts and figures MULTILIFT SELECT 6 www.arburg.com MULTILIFT SELECT 6 Technical data Stroke X-axis min. 100 Stroke Z-axis Clamping face, fixed mould platen 190 A D K Stroke Y axis 156 B 2) C 123 P G L

More information

vertical fuse switch disconnectors

vertical fuse switch disconnectors SWITCHGEAR ARS vertical fuse switch disconnectors - touch protection IP 30 from the front - fibre glass extra strenghtened, self extinguishing thermoplastics - double clearance between open contacts -

More information

ALLROUNDER 820 S Multi-component

ALLROUNDER 820 S Multi-component Facts and figures ALLROUNDER 82 S Multi-component Distance between tie bars: 82 x 82 mm Clamping force: 4 kn Injection unit: 21, 32, 46 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 82 S Multi-component

More information

QuickFlex. Adapter Program. The new quick change system for high performance and precision. Minimal investment, maximal expandability.

QuickFlex. Adapter Program. The new quick change system for high performance and precision. Minimal investment, maximal expandability. QuickFlex The new quick change system for high performance and precision. Minimal investment, maximal expandability. Adapter Program QuickFlex Minimal investment, maximal expandability. Minimal investment

More information

Facts and figures INTEGRALPICKER V.

Facts and figures INTEGRALPICKER V. Facts and figures INTEGRALPICKER V www.arburg.com INTEGRALPICKER V Technical data Stroke, X-axis F Stroke, Y axis Clamping surface fixed mould platen A H K D C B 135 G P Ejection chute B-axis M N L 2 Technical

More information

ALLROUNDER 470 S Multi-component

ALLROUNDER 470 S Multi-component Facts and figures ALLROUNDER 47 S Multi-component Distance between tie bars: 47 x 47 mm Clamping force: 11 kn Injection unit: 17, 29, 4 horizontal 3, 7, 1, 17, 29 vertical www.arburg.com Machine dimensions

More information

INFINEUM WORLDWIDE WINTER DIESEL FUEL QUALITY SURVEY

INFINEUM WORLDWIDE WINTER DIESEL FUEL QUALITY SURVEY INFINEUM WORLDWIDE WINTER DIESEL FUEL QUALITY SURVEY 22 http://www.infineum.com/ Contents Forward CONTENTS Introduction... 3 The Trends... 4 Worldwide Diesel Fuel Survey Physical Inspection Data Mean values...

More information

90 Series - Socket overview for 60 series relays

90 Series - Socket overview for 60 series relays 90 Series - Socket overview for 0 series relays See page 90 90.0 99.0 90.0 0. Screw terminal (Box clamp) socket Panel or mm rail - Coil indication and EMC 90.0 0. Double terminal (EN 00) mount suppression

More information

The STH is a mid-range speed and torque gear reducer that

The STH is a mid-range speed and torque gear reducer that -SERIES The is a mid-range speed and torque gear reducer that sets a new standard for rotary positioning performance at an exceptional price point. A SHIMPO ABLE planetary gearbox is the interface between

More information

Mechanical. Shaft handling. Pneumatic expansion shafts. Friction and knife shafts. and adapters. Expansion couplings

Mechanical. Shaft handling. Pneumatic expansion shafts. Friction and knife shafts. and adapters. Expansion couplings Pneumatic expansion shafts Mechanical expansion shafts Expansion couplings Expansion chucks and adapters Friction and knife shafts Shaft handling Expansion couplings E X P A N S I O N Pneumatic expansion

More information

SERIE 59S. Rear clamp. Frontal clamp INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS SIN/COS

SERIE 59S. Rear clamp. Frontal clamp INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS SIN/COS INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 2.048 pulses per turn Shaft fixing through front or rear clamp External diameter 58 mm Hollow shaft Ø 10, 12 or 14 mm Protection

More information

COMBROIND001_= THREE PHASE SQUIRREL CAGE INDUCTION MOTORS. IE1 motors MAA - BAA Series IE2 motors MAQ - BAQ Series

COMBROIND001_= THREE PHASE SQUIRREL CAGE INDUCTION MOTORS. IE1 motors MAA - BAA Series IE2 motors MAQ - BAQ Series COMBROIND001_= THREE PHASE SQUIRREL CAGE INDUCTION MOTORS IE1 motors MAA - BAA Series IE2 motors MAQ - BAQ Series 03 07 07 08 12 15 15 16 18 20 SPECIFICATIONS AND STANDARDS IE1 - MAA / BAA Series Technical

More information

MOTOMAN SDA-series. Flexible Applications with the SDA-series. 15 axes Flexible applications Compact design allows maximum performance SDA10D SDA10F

MOTOMAN SDA-series. Flexible Applications with the SDA-series. 15 axes Flexible applications Compact design allows maximum performance SDA10D SDA10F Flexible pplications with the SD-series The SD-series are slim an agile 1-axis dual-arm robots providing human-like flexibility of movement and fast acceleration. They distinguish themselves through slim

More information

Facts and figures MULTILIFT V 6

Facts and figures MULTILIFT V 6 Facts and figures MULTILIFT V 6 www.arburg.com MULTILIFT V 6 Technical data F Stroke X-axis 3) Stroke Z-axis 1) Clamping face fixed mould platen E A K 4) Stroke Y axis 2) D 2) 156 B 4) C 2)4) 123 P 1)

More information

DYNAS3 LEADING SOLUTIONS FOR DYNAMIC ENGINE TESTING. Explore the future

DYNAS3 LEADING SOLUTIONS FOR DYNAMIC ENGINE TESTING. Explore the future LEADING SOLUTIONS FOR DYNAMIC ENGINE TESTING DYNAS3 Explore the future Automotive Test Systems Process & Environmental Medical Semiconductor Scientific 2 DYNAS 3 Best-in-class AC dynamometers The HORIBA

More information

CRYSTALLINE SILICON PV MODULE INSTALLATION GUIDE THE POWER OF ASTRONERGY

CRYSTALLINE SILICON PV MODULE INSTALLATION GUIDE THE POWER OF ASTRONERGY CRYSTALLINE SILICON PV MODULE INSTALLATION GUIDE THE POWER OF ASTRONERGY CRYSTALLINE SILICON PV MODULE INSTALLATION GUIDE 1. Introduction 1.1 Purpose 1.2 Limitation of Liability 2. Safety 2.1 General Safety

More information

U X Y W L. Gear wheels. Linkage. In option: Stainless steel AISI 304L , AISI 316L or painted steel (standard RAL)

U X Y W L. Gear wheels. Linkage. In option: Stainless steel AISI 304L , AISI 316L or painted steel (standard RAL) Commercial dampers of the U range are designed to control or shut off ductworks with airtightness classifi cation going from non-classifi ed to class 4 according to EN1751. The handling and installation

More information

REVOLUTIONARY TAPPING ARM MACHINE S.

REVOLUTIONARY TAPPING ARM MACHINE S. REVOLUTIONARY TAPPING ARM MACHINE S www.roscamat.com Electric Mac Orientable Head V-H, 4x90º M16 (aluminium) M14 9/16 Model R MOSQUITO Reach 765 mm. - 30 Height 515 mm. -20 Single Phase 220 V. Available

More information

Angle Seat Globe Control Valve, Metal

Angle Seat Globe Control Valve, Metal Angle Seat Globe Control Valve, Metal Construction The GEMÜ /-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos

More information

Angle Seat Globe Control Valve, Metal

Angle Seat Globe Control Valve, Metal Angle Seat Globe Control Valve, Metal Construction The GEMÜ 2/2-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 1434 µpos, GEMÜ 1435

More information

Delivery Statistics. Second quarter 2015 EUROPEAN PULP AND PAPER INDUSTRY

Delivery Statistics. Second quarter 2015 EUROPEAN PULP AND PAPER INDUSTRY Second quarter EUROPEAN PULP AND PAPER INDUSTRY INTRODUCTION 2 nd Quarter, Paper and board deliveries by CEPI countries were 45.9 million tonnes in the first half of, a small tonnage decrease on the same

More information

ALLROUNDER 720 H. Distance between tie bars: 720 x 720 mm Clamping force: 3200 kn Injection unit (according to EUROMAP): 1300, 2100, 3200

ALLROUNDER 720 H. Distance between tie bars: 720 x 720 mm Clamping force: 3200 kn Injection unit (according to EUROMAP): 1300, 2100, 3200 Facts and figures ALLROUNDER 72 H Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit (according to EUROMAP): 13, 21, 32 www.arburg.com 72 H Machine dimensions 858 2198 max. 385

More information

External Drive Axis Packages

External Drive Axis Packages External Drive Axis Packages for MOTOMAN Robots with DX0 Controller www.yaskawa.eu.com External Drive Axis Packages As a leading developer and manufacturer of servomotors and controllers, YASKAWA is able

More information

LARGEST TRANSFORMERS MANUFACTURED

LARGEST TRANSFORMERS MANUFACTURED LARGEST TRANSFORMERS MANUFACTURED 2 LARGE TRANSFORMERS REFERENCE LIST WHO WE ARE SGB-SMIT AT A GLANCE 450 YEARS OF EXPERIENCE Combined, more than Basis for know-how and for know-why More than 3,500 EMPLOYEES

More information

PRODUCT CATALOGUE CHILLER ECOMAX

PRODUCT CATALOGUE CHILLER ECOMAX PRODUCT CATALOGUE CHILLER ECOMAX English/02-2005 AIR COOLED CHILLER INTRODUCTION TO THE RANGE The simple and robust design of the Ecomax range brings real benefits in terms of savings in investment, operation

More information

MOTOMAN SDA-SERIES. Flexible Applications with the SDA-series FS100 KEY BENEFITS. Controlled by

MOTOMAN SDA-SERIES. Flexible Applications with the SDA-series FS100 KEY BENEFITS. Controlled by MOTOMN SD-SERIES Flexible pplications with the SD-series The SD-series are slim an agile 15-axis dual-arm robots providing human-like flexibility of movement and fast acceleration. They distinguish themselves

More information

June EU Countries NEW COMMERCIAL VEHICLE REGISTRATIONS. PRESS EMBARGO FOR ALL DATA: July 26, 2013, 8.00 A.M. (6.00 A.M. GMT)

June EU Countries NEW COMMERCIAL VEHICLE REGISTRATIONS. PRESS EMBARGO FOR ALL DATA: July 26, 2013, 8.00 A.M. (6.00 A.M. GMT) PRESS EMBARGO FOR ALL DATA: y 26, 213, 8. A.M. (6. A.M. GMT) Press s Release e e NEW COMMERCIAL VEHICLE REGISTRATIONS e 213 EU Countries 15, LCVs up to 3.5t 2, Heavy Trucks of 16t and over ons New Registrati

More information

SuperLinePlus. Edition The fastest service for special tooling! Shortest delivery times for special tools of the highest quality!

SuperLinePlus. Edition The fastest service for special tooling! Shortest delivery times for special tools of the highest quality! Edition 2009 Quotation within 24h! Tool delivery within 3 weeks SuperLinePlus The fastest service for special tooling! Shortest delivery times for special tools of the highest quality! SL Plus solid carbide

More information

ALLROUNDER 630 H. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.

ALLROUNDER 630 H. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100. Facts and figures ALLROUNDER 63 H Distance between tie bars: 63 x 63 mm Clamping force: 25 kn Injection unit (acc. to EUROMAP): 8, 13, 21 www.arburg.com 63 H Machine dimensions 858 438 1468 2198 max. 395

More information

Cast-in Channels Curved Solution

Cast-in Channels Curved Solution HTA-CS 10-E Cast-in Channels Curved Solution The advantages at a glance Besides the excellent adjustability HALFEN cast-in channels offer enormous time advantages during application. The result: fast construction

More information

High Pole motors MA Series

High Pole motors MA Series High Pole motors MA Series ABOUT US DAC Electric is a fairly young but highly experienced combination of professionals from all over the world. The founders, from the Netherlands and the Czech Republic,

More information

Automatic battery chargers

Automatic battery chargers Automatic battery chargers electric Switching battery chargers BCF... rder code Rated Rated Qty Wt output output per current voltage pkg DC [A] [V] n [kg] 1 charging level. BCF 0250 12 2.5 1 0.270 12 BCF

More information

ALLROUNDER 520 E. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800.

ALLROUNDER 520 E. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800. Facts and figures ALLROUNDER 52 E Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit (acc. to EUROMAP): 29, 4, www.arburg.com 52 E Machine dimensions 2 135 85 12 33 4 13 625 4885

More information

Annual Statistics 2015

Annual Statistics 2015 Annual Statistics 2015 FEFCO ANNUAL STATISTICS 2015 Tables: Page Key Statistics 2 Total Shipments (Millions of m²) (including Non-Members) 3 Total Shipments ('000 Tonnes) (including Non-Members) 4 Shipments

More information

ALLROUNDER 370 E. Distance between tie bars: 370 x 370 mm Clamping force: 600 kn Injection unit (acc. to EUROMAP): 170, 290.

ALLROUNDER 370 E. Distance between tie bars: 370 x 370 mm Clamping force: 600 kn Injection unit (acc. to EUROMAP): 170, 290. Facts and figures ALLROUNDER 37 E Distance between tie bars: 37 x 37 mm Clamping force: 6 kn Injection unit (acc. to EUROMAP): 17, 29 www.arburg.com 37 E Machine dimensions 215 122 85 12 33 435 192 245

More information

6-way Changeover valves 6VA VG VM VR VS way Changeover valves 8VR... 20

6-way Changeover valves 6VA VG VM VR VS way Changeover valves 8VR... 20 Changeover valve Coding Changeover system valve Changeover valves are used in front and telescopic loaders, forklift trucks, etc. to provide additional functions on the machinery. An example may be a

More information

IPC Medium-Pressure Internal Gear Pumps Technical Data Sheet

IPC Medium-Pressure Internal Gear Pumps Technical Data Sheet IPC Medium-Pressure Internal Gear Pumps Technical Data Sheet Function 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing segment 5 Axial disc Axial

More information

ALLROUNDER 630 A. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.

ALLROUNDER 630 A. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100. Facts and figures ALLROUNDER Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com Machine dimensions 2217 227 1487 max. 450 877

More information

ALLROUNDER 570 H. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800, 1300.

ALLROUNDER 570 H. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800, 1300. Facts and figures ALLROUNDER 57 H Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 4, 8, 13 www.arburg.com 57 H Machine dimensions 22 148 85 438 2242 1) 2251

More information

CURVILINE.

CURVILINE. CURVILINE www.rollon.com About Rollon Development of global business Continual expansion and optimization of the portfolio 1975 Parent company, Rollon S.r.l., founded in Italy 1991 Founding of Rollon GmbH

More information

BR 20b Ball valve. PFA-lined. Application: Versions:

BR 20b Ball valve. PFA-lined. Application: Versions: PFA-lined BR 20b Ball valve Application: Tight-closing PFA-lined ball valve for (highly) corrosive media, especially with high process demands in chemical plants: Nominal sizes DN 25 to DN 200 Nominal

More information

ALLROUNDER 270 A. Distance between tie bars: 270 x 270 mm Clamping force: 350 kn Injection unit (acc. to EUROMAP): 5, 70, 100.

ALLROUNDER 270 A. Distance between tie bars: 270 x 270 mm Clamping force: 350 kn Injection unit (acc. to EUROMAP): 5, 70, 100. Facts and figures ALLROUNDER 27 A Distance between tie bars: 27 x 27 mm Clamping force: 35 kn Injection unit (acc. to EUROMAP): 5, 7, 1 www.arburg.com 27 A Machine dimensions 238 122 12 425 254 438 191

More information

ALLROUNDER 630 S. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.

ALLROUNDER 630 S. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100. Facts and figures ALLROUNDER 630 S Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com 630 S Machine dimensions 2183 5) 2207

More information

ALLROUNDER 570 C GOLDEN EDITION

ALLROUNDER 570 C GOLDEN EDITION Facts and figures ALLROUNDER 57 C GOLDEN EDITION Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 8 www.arburg.com 57 C GOLDEN EDITION Machine dimensions 255

More information

ALLROUNDER 270 C GOLDEN EDITION

ALLROUNDER 270 C GOLDEN EDITION Facts and figures ALLROUNDER 2 C GOLDEN EDITION Distance between tie bars: 2 x 2 mm Clamping force: 4 kn Injection unit (acc. to EUROMAP):, 1 www.arburg.com 2 C GOLDEN EDITION Machine dimensions 85 33

More information

SCM DIN. Other advantages:

SCM DIN. Other advantages: SCM 012-130 DIN SCM 012-130 DIN is a series of axial piston motors particularly suitable for mobile hydraulics. SCM 012130 DIN is of the bent-axis type with spherical pistons. Other advantages: The design

More information

European Hotel Review

European Hotel Review United Kingdom United States Blue Fin Building 735 East Main Street 110 Southwark Street Hendersonville London SE1 0TA TN 37075 Phone: +44 (0)20 7922 1930 Phone: +1 (615) 824 8664 Fax: +44 (0)20 7922 1931

More information

820 S. Machine dimensions. Electrical connection. Cooling water connection 850 6) 878 7) 960 5) 113/438 4) ) ) ) )6) )

820 S. Machine dimensions. Electrical connection. Cooling water connection 850 6) 878 7) 960 5) 113/438 4) ) ) ) )6) ) Facts and figures ALLROUNDER 820 S Distance between tie bars: 820 x 820 mm Clamping force: 4000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 www.arburg.com 820 S Machine dimensions 2250 5) 2342

More information

Gear Pumps/Motors Series PGP/PGM 500

Gear Pumps/Motors Series PGP/PGM 500 Gear Pumps/Motors Series PGP/PGM 500 Express Delivery Program Note This document and other information from Parker Hannifin GmbH, its subsidiaries, sales offices and authorized distributors provide product

More information

Rotary Motor. Technical Information.

Rotary Motor. Technical Information. Rotary Motor Technical Information www.hiwinmikro.com.tw Rotary Motor Ordering Information... 1 Illustration for Characteristic Curves of Motor... 1 Illustration for Capability of Encoder... 1 Cautions...

More information

MOTOMAN SDA-series FS100. Flexible Applications with the SDA-series. Controlled by

MOTOMAN SDA-series FS100. Flexible Applications with the SDA-series. Controlled by MOTOMN SD-series Flexible pplications with the SD-series The SD-series are slim an agile 15-axis dual-arm robots providing human-like flexibility of movement and fast acceleration. They distinguish themselves

More information

NEW COMMERCIAL VEHICLE REGISTRATIONS EUROPEAN UNION 1. April 2017

NEW COMMERCIAL VEHICLE REGISTRATIONS EUROPEAN UNION 1. April 2017 PRESS EMBARGO: NEW COMMERCIAL VEHICLE REGISTRATIONS EUROPEAN UNION 1 April 2017 Next press release: Friday 23 June 2017 1 Data for Malta unavailable Page 1 of 7 Commercial vehicle registrations: +3.8%

More information

ELWOOD HIGH PERFORMANCE MOTORS

ELWOOD HIGH PERFORMANCE MOTORS SW SERIES WASHDOWN MOTOR DATA: M42X FRAME 115V Drive Supply Motor Data (160VDC Bus) MOTOR MODEL M422 L M423 S M422 L M423 S MECHANICAL DATA (1) Nm 0.62 0.99 0.62 0.99 lb in 5.49 8.81 5.49 8.81 Nm 1.86

More information

DOUBLE OFFSET FLANGED BUTTERFLY VALVES GRIP THAT HOLDS

DOUBLE OFFSET FLANGED BUTTERFLY VALVES GRIP THAT HOLDS GRIP THAT HOLDS SERIES 2E-3 // PN 10/16/25/40 // DN 150-3000 (6 118 ) // Hydraulic equipment // Industrial piping // Sanitary installations DOUBLE OFFSET FLANGED BUTTERFLY VALVES GENERAL INFORMATION GENERAL

More information

ArenaVision LED gen2 Floodlight

ArenaVision LED gen2 Floodlight HGB BV BVP415 HGB BVP415 BV ArenaVision LED gen2 Floodlight /BVP415 220230V 5060Hz 1,25 380400V 50Hz RG1 HGB 15º 40º 65º BV 15º 40º 65º 161000 15 C 161000 20 C 161000 25 C 155000 1392 30 C 149000 1314

More information