6-way Changeover valves 6VA VG VM VR VS way Changeover valves 8VR... 20
|
|
|
- Emery Scott
- 5 years ago
- Views:
Transcription
1 Changeover valve
2
3 Coding Changeover system valve Changeover valves are used in front and telescopic loaders, forklift trucks, etc. to provide additional functions on the machinery. An example may be a valve fi tted to the end of telescopic loader boom can switch between to tilt and to grab, making use of the same control valve, and a changeover valve. There are two main reasons whom to this approach can be inviting: a) A changeover valve cost less than an additional control valve section and b) only needs a pair of hoses to be run to two different services that are close together in a distant location on a machine. ROQUET range of changeover valves feature high-strength cast-iron bodies in our own foundry and casehardened close tolerance spools for long life and low leakage. Special care has been taken in the design of the spool and the cored fl ow-passages in the body to give good combined fl ow/pressure performance. This catalogue shows the range of ROQUET changeover valves. To suit your requirements, please contact with us. Index 6-way Changeover valves 6VA VG VM VR VS way Changeover valves 8VR Changeover valves with relief valve 6VD VI VL VT Solenoid Kits Reflief valves This Catalogue shows the product in the most standard confi guration; customized or special designs are also avaible, please contact to PEDRO ROQUET S.A. The specifi cations and data in this catalogue are not open to any interpretation, please contact with PEDRO ROQUET S.A. in case of doubt. PEDRO ROQUET S.A. reserves the right to modify, update or revise this catalogue without prior notice. PEDRO ROQUET S.A. IS NOT RESPONSABLE FOR ANY DAMAGE CAUSED BY AN INCORRECT USE OF THE PRODUCT. 3
4 Control valve and 6-way changeover valve Control valve and 8-way changeover valve 4
5 Coding system 6VA PART NUMBER 6VA B 1 D24 M PB SD 000 _ Code Type 6 Spool 6VA 6-way stackable PA ABDC 2 Ports B 3/8 G. PB ABDC C 1/2 G. D M.18x1,5 3 Connector type 1 Hirschmann 2 Deutsch without diode 3 Deutsch with diode 4 Voltage 7 Drainage CD With drainage SD Without drainage 8 Protection 000 No paint 005 Phosphated ROQUET paint code. Check. D12 D24 12 V 24 V 9 Code 5 Nominal flow M L 40 L./min. 80 L./min. 5
6 Dimensions 6VA Ø /4 G Fit torque: Nm Technical data Work pressure range bar Technical data Ports A, B, C, D,, 1/2 G. - 3/8 G. - M.18 Nominal fl ow 40 L./min L./min. Connector type Deutsch - Hirschmann Fluid recommended ISO 6743 Type HM, HV or HG Voltage 12V - 24V Flow temperature range -20 C C Power 40 L./min. 38W Viscosity range ISO 3448 CAT. VG32-VG46 Power 80 L./min. 44W Fluid cleanliness range 16/13 s./ ISO 4406 or RP70H 6
7 Section, spare parts and function 6VA A D B C B C 1 Position Part number Description and parts 1A N2231/22 Union kit 2 valves (4 screws, 8 nuts, 8 washers and 1 pair of O-rings) 1B N2231/23 Union kit 3 valves (4 screws, 8 nuts, 8 washers and 2 pair of O-rings) 1C N2231/24 Union kit 4 valves (4 screws, 8 nuts, 8 washers and 3 pair of O-rings) 1D N2231/25 Union kit 5 valves (4 screws, 8 nuts, 8 washers and 4 pair of O-rings) 1E N2231/26 Union kit 6 valves (4 screws, 8 nuts, 8 washers and 5 pair of O-rings) Note: Roquet deliveries union kits and individual valves. Customer will be able to set multiple valves, according their requirements. PA function PB-PA function Multiple function A B D C A B D C A B D C PB function A B D C A B D C A B D C A B D C 7
8 Coding system 6VG PART NUMBER 6VG G 2 D24 M PB SD 000 _ Code Type 6 Spool 6VG 6-way PA ABDC 2 Ports G 3/4-16 UNF-2B PB ABDC 3 Connector type 7 Drainage 1 Hirschmann 2 Deutsch without diode CD SD With drainage Without drainage 3 Deutsch with diode 4 Voltage 8 Protection 000 No paint D12 D24 12 V 24 V 007 Zinc chromated plated ROQUET paint code. Check. 5 Nominal flow 9 Code M L 40 L./min. 80 L./min. 8
9 Dimensions 6VG A B D C Ø Technical data Technical data Work pressure range bar Ports A, B, C, D,, 3/4-16 UNF-2B Nominal fl ow 40 L./min L./min. Connector type Deutsch - Hirschmann Fluid recommended ISO 6743 Type HM, HV or HG Voltage 12V - 24V Flow temperature range -20 C C Power 40 L./min. 38W Viscosity range ISO 3448 CAT. VG32-VG46 Power 80 L./min. 44W Fluid cleanliness range 16/13 s./ ISO 4406 or RP70H 9
10 Section and function 6VG PA function PB function A B D C A B D C 10
11 Coding system 6VM PART NUMBER 6VM B 1 D24 M PA SD 000 _ Code Type 6 Spool 6VM 6-way PA ABDC 2 Ports B 3/8 G. PB ABDC D M.18x1,5 7 Drainage 3 Connector type 1 Hirschmann CD SD With drainage Without drainage 2 Deutsch without diode 3 Deutsch with diode 8 Protection 000 No paint 4 Voltage ROQUET paint code. Check. D12 D24 12 V 24 V 9 Code 5 Nominal flow M L 40 L./min. 80 L./min. 11
12 Dimensions 6VM C1 C2 C4 C Technical data Work pressure range bar Technical data Ports A, B, C, D,, 3/8 G. - M.18 Nominal fl ow 40 L./min L./min. Connector type Deutsch - Hirschmann Fluid recommended ISO 6743 Type HM, HV or HG Voltage 12V - 24V Flow temperature range -20 C C Power 40 L./min. 38W Viscosity range ISO 3448 CAT. VG32-VG46 Power 80 L./min. 44W Fluid cleanliness range 16/13 s./ ISO 4406 or RP70H 12
13 Section and function 6VM PA function PB function A B D C A B D C 13
14 Coding system 6VR PART NUMBER 6VR D 1 D24 M PB SD 000 _ Code Type 6 Spool 6VR 6-way PA ABDC 2 Ports C 1/2 G. PB ABDC D G M.18x1,5 3/4-16 UNF-2B X1 A B D C 3 Connector type 1 Hirschmann 2 Deutsch without diode 3 Deutsch with diode X2 X3 A B D C A B D C 4 Voltage D12 12 V D24 24 V 5 Nominal flow M 40 L./min. L 80 L./min. 7 Drainage CD With drainage SD Without drainage 8 Protection 000 No paint ROQUET paint code. Check. 9 Code 14
15 Dimensions 6VR A B D C Technical data Work pressure range bar Technical data Ports A, B, C, D,, 3/4 UNF - M.18x1,5-1/2 G. Nominal fl ow 40 L./min L./min. Connector type Deutsch - Hirschmann Fluid recommended ISO 6743 Type HM, HV or HG Voltage 12V - 24V Flow temperature range -20 C C Power 40 L./min. 38W Viscosity range ISO 3448 CAT. VG32-VG46 Power 80 L./min. 44W Fluid cleanliness range 16/13 s./ ISO 4406 or RP70H 15
16 Section and function 6VR A B D C PA function PB function A B D C A B D C X1 function X2 function X3 function A B D C A B D C A B D C 16
17 Coding system 6VS PART NUMBER 6VS A 1 D24 S PB SD 000 _ Code Type 6 Spool 6VS 6-way stackable PA ABDC 2 Ports A 1/4 G. PB ABDC 3 Connector type 1 Hirschmann 2 Deutsch without diode 3 Deutsch with diode 7 Drainage SD Without drainage 8 Protection 000 No paint 4 Voltage ROQUET paint code. Check. D12 D24 12 V 24 V 9 Code 5 Nominal flow S To 20 L./min. 17
18 Dimensions 6VS Ø Fit torque: 9-10 Nm M. 5 Ø Technical data Technical data Work pressure range bar Fluid cleanliness range 16/13 s./ ISO 4406 or RP70H Nominal fl ow 20 L./min. Ports A, B, C, D,, 1/4 G. Fluid recommended ISO 6743 Type HM, HV or HG Connector type Deutsch - Hirschmann Flow temperature range -20 C C Voltage 12V - 24V Viscosity range ISO 3448 CAT. VG32-VG46 Power 20 L./min. 38W 18
19 Section, spare parts and function 6VS 1 2 Position Part number Description and parts 1A 6855/21 Union kit 2 valves (4 screws, 8 nuts, 8 washers and 1 pair of O-rings) 1B 6855/22 Union kit 3 valves (4 screws, 8 nuts, 8 washers and 2 pair of O-rings) 1C 6855/23 Union kit 4 valves (4 screws, 8 nuts, 8 washers and 3 pair of O-rings) 2A Check valve kit Note: Roquet deliveries union kits and individual valves. Customer will be able to set multiple valves, according their requirements. PB function Multiple function Check valve function C B CDBA CDBA D CDBA A 19
20 Coding system 8VR PART NUMBER 8VR B 1 D24 M PA PB SD 000 Code Type 6 1st Spool 8VR 8-way PA ABDC 2 Ports B 3/8 G. PB ABDC Note: First spool is nearest P port 3 Connector type 1 Hirschmann 2 Deutsch without diode 3 Deutsch with diode 4 Voltage 7 2nd Spool PA PB ABDC ABDC D12 D24 12 V 24 V 8 Drainage CD With drainage 5 Nominal flow SD Without drainage M L 40 L./min. 80 L./min. 9 Protection 000 No paint ROQUET paint code. Check. 10 Code 20
21 Dimensions 8VR C5 C C4 C /4 G Ø C2 C Technical data Work pressure range bar Technical data Ports A, B, C, D,, 3/8 G. Nominal fl ow 40 L./min L./min. Connector type Deutsch - Hirschmann Fluid recommended ISO 6743 Type HM, HV or HG Voltage 12V - 24V Flow temperature range -20 C C Power 40 L./min. 38W Viscosity range ISO 3448 CAT. VG32-VG46 Power 80 L./min. 44W Fluid cleanliness range 16/13 s./ ISO 4406 or RP70H 21
22 Section, and spare function parts and function 8VR A C5 C6 B C1 C2 C4 C3 PA-PA function PA-PB function C1 C2 C4 C3 C1 C2 C4 C3 C5 C6 C5 C6 22
23 Coding system 6VD PART NUMBER 6VD H 1 D12 L PC SD 482 _ LA 3 _ 3 _ Code Type 6VD 6-way 2 Ports H 1/2 G. - 3/8 G. 3 Connector type 1 Hirschmann 2 Deutsch without diode 3 Deutsch with diode 4 Voltage D12 12 V D24 24 V 5 Nominal flow M 40 L./min. L 80 L./min. 6 Spool 7 Drainage CD With drainage SD Without drainage 8 Protection 000 No paint ROQUET paint code. Check. 9 Solenoid position LA Solenoid in side A port 10 Releif valve setting (A) bar (80 bar) bar (160 bar) bar (210 bar) bar (325 bar) 11 Releif valve setting (D) bar (80 bar) bar (160 bar) bar (210 bar) A C B D bar (325 bar) PC 12 Code 23
24 Dimensions 6VD /2 G. Y 3/8 G M.8 1/2 G /2 G. 48 3/8 G Technical data Technical data Work pressure range bar Ports A, B,, 1/2 G. Nominal fl ow 40 L./min L./min. Ports 3, 4, 13, 14 3/8 G. Fluid recommended ISO 6743 Type HM, HV or HG Connector type Deutsch - Hirschmann Flow temperature range -20 C C Voltage 12V - 24V Viscosity range ISO 3448 CAT. VG32-VG46 Power 40 L./min. 38W Fluid cleanliness range 16/13 s./ ISO 4406 or RP70H Power 80 L./min. 44W 24
25 Section, spare parts and function 6VD A C B D 2 1 Position Part number Description and parts 1A N2477/72 Union kit 2 valves (4 screws, 8 nuts, 8 washers and 1 pair of O-rings) 1B N2477/73 Union kit 3 valves (4 screws, 8 nuts, 8 washers and 2 pair of O-rings) 1C N2477/74 Union kit 4 valves (4 screws, 8 nuts, 8 washers and 3 pair of O-rings) 1D N2477/75 Union kit 5 valves (4 screws, 8 nuts, 8 washers and 4 pair of O-rings) 1E N2477/76 Union kit 6 valves (4 screws, 8 nuts, 8 washers and 5 pair of O-rings) 2A 6VA 6-way changeover valve (see page 4) Note: Roquet deliveries union kits and individual valves. Customer will be able to set multiple valves, according their requirements. Multiple function 6VA 6VD A B D C A C B D --- ± - Bar --- ± - Bar
26 Coding system 6VI PART NUMBER 6VI D 1 D12 L PA SD 000 _ LA 3 _ 3 _ Code Type 6VI 6-way 2 Ports D M.18x1,5 3 Connector type 1 Hirschmann 2 Deutsch without diode 3 Deutsch with diode 4 Voltage D12 12 V D24 24 V 5 Nominal flow M 40 L./min. L 80 L./min. 6 Spool 7 Drainage CD With drainage SD Without drainage 8 Protection 000 No paint ROQUET paint code. Check. 9 Solenoid position LA Solenoid in side A port 10 Releif valve setting (A) bar (80 bar) bar (160 bar) bar (200 bar) bar (315 bar) 11 Releif valve setting (D) bar (80 bar) bar (160 bar) PA PB ABDC ABDC bar (200 bar) bar (315 bar) 12 Code 26
27 Dimensions 6VI /4 G Technical data Work pressure range bar Technical data Ports A, B, C, D,, M.18x1,5 Nominal fl ow 40 L./min L./min. Connector type Deutsch - Hirschmann Fluid recommended ISO 6743 Type HM, HV or HG Voltage 12V - 24V Flow temperature range -20 C C Power 40 L./min. 38W Viscosity range ISO 3448 CAT. VG32-VG46 Power 80 L./min. 44W Fluid cleanliness range 16/13 s./ ISO 4406 or RP70H 27
28 Section and function 6VI A D PA function PB function A B D C R A B D C R 28
29 Coding system 6VL PART NUMBER 6VL H 1 D24 M PA SD 482 _ LA 3 _ 3 _ Code Type 6VL 6-way 2 Ports H 1/2 G. - 3/8 G. 3 Connector type 1 Hirschmann 2 Deutsch without diode 3 Deutsch with diode 4 Voltage D12 12 V D24 24 V 5 Nominal flow 7 Drainage CD With drainage SD Without drainage 8 Protection 000 No paint ROQUET paint code. Check. 9 Solenoid position LA Solenoid in side A port LB Solenoid in side B port 10 Releif valve setting (A) bar (80 bar) bar (160 bar) bar (200 bar) M 40 L./min bar (315 bar) 6 Spool 11 Releif valve setting (B) PA A B D C bar (80 bar) bar (160 bar) bar (200 bar) bar (315 bar) 12 Code 29
30 Dimensions 6VL /4 G Technical data Work pressure range Nominal fl ow bar 40 L./min. Technical data Ports A2, B2 1/2 G. Ports A, B, A1, B1 3/8 G. Fluid recommended ISO 6743 Type HM, HV or HG Connector type Deutsch - Hirschmann Flow temperature range -20 C C Voltage 12V - 24V Viscosity range ISO 3448 CAT. VG32-VG46 Power 40 L./min. 38W Fluid cleanliness range 16/13 s./ ISO 4406 or RP70H 30
31 Section and function 6VL PA function B1 A1 B2 B A A2 31
32 Coding system 6VT PART NUMBER 6VT D 1 D24 L PA SD 461 _ LA 3 _ 3 _ Code Type 6VT 6-way 2 Ports D M.18x1,5 3 Connector type 8 Protection 000 No paint ROQUET paint code. Check. 9 Solenoid position LA Solenoid in 2 port side LB Solenoid in 3 port side 1 Hirschmann 2 Deutsch without diode LC LS Solenoid in both sides Without solenoid 3 Deutsch with diode 4 Voltage D12 12 V D24 24 V 5 Nominal flow L 80 L./min. 6 Spool 10 Releif valve setting (2) bar (80 bar) bar (160 bar) bar (210 bar) bar (325 bar) 11 Releif valve setting (3) bar (80 bar) bar (160 bar) PA 1 3 N bar (210 bar) bar (325 bar) 12 Code 7 Drainage SD Without drainage 32
33 Dimensions 6VT Technical data Technical data Work pressure range bar Fluid cleanliness range 16/13 s./ ISO 4406 or RP70H Nominal fl ow 80 L./min. Ports 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 M.18x1,5 Fluid recommended ISO 6743 Type HM, HV or HG Connector type Deutsch - Hirschmann Flow temperature range -20 C C Voltage 12V - 24V Viscosity range ISO 3448 CAT. VG32-VG46 Power 80 L./min. 44W 33
34 Section and function 6VT PA function N
35 Solenoids kits Part number: /12 Part number: /24 80 Part number: N2966/28/12 Part number: N2966/28/ Power: Voltage: Flow: Connector: 38W 12V 40 L./min. Hirschman Power: Voltage: Flow: Connector: 38W 24V 40 L./min. Hirschman Power: Voltage: Flow: Connector: 44W 12V 80 L./min. Hirschman Power: Voltage: Flow: Connector: 44W 24V 80 L./min. Hirschman Part number: /12 Part number: / Power: Voltage: Flow: Connector: 38W 12V 40 L./min. Deutsch Power: Voltage: Flow: Connector: 38W 24V 40 L./min. Deutsch Note: Standard without diode. Note: Standard without diode. 35
36 Solenoids kits Part number: /12 Part number: / Power: Voltage: Flow: Connector: 38W 12V 40 L./min. Deutsch Note: With diode on request (not standard). Part number: /12 Part number: / Power: Voltage: Flow: Connector: 44W 12V 80 L./min. Deutsch Note: Standard without diode. Part number: N9051/8/ Power: Voltage: Flow: Connector: 44W 24V 80 L./min. Deutsch Note: Standard without diode. Part number: N9051/8/ Power: Voltage: Flow: Connector: 38W 24V 40 L./min. Deutsch Note: With diode on request (not standard) Power: Voltage: Flow: Connector: 44W 12V 80 L./min. Deutsch Power: Voltage: Flow: Connector: 44W 24V 80 L./min. Deutsch Note: With diode on request (not standard). Note: With diode on request (not standard). 36
37 Solenoids Relief valvekits Tamper-proof Pressure range Tamper-proof 5-80 (80) bar * A/B R (160) bar (200) bar (315) bar 44 Relief and anticavitation valve Part number Setting (bar) 8841*** A/B T
38 38 Notes
39
40 Distributor: /03.14
CONTROL VALVES
- 1 CONROL VALVES Introduction to the company HISORY Over fi fty years experience in fl uid power. Supplier to international manufactures of agricultural, construction, mining, mechanical handling, machine-tool
CONTROL VALVES
- 1 CONROL VALVES resentación de la compañía HISORY Over fi fty years experience in fl uid power. Supplier to international manufactures of agricultural, construction, mining, mechanical handling, machine-tool
RPE2-04. Functional Description HA /2002. Solenoid Operated Directional Valves. Replaces HA /2000
Solenoid Operated Directional Valves RPE2-04 HA 4012 3/2002 Size 04 p max up to 320 bar Q max up to 20 l/min Replaces HA 4012 6/2000 Special model - special installation dimensions 4/3-, 4/2- and 3/2-way
BW0511FP. ByWire Elements BW0511FP Flow Sharing Element Interface IBW0511
ywire Elements Flow Sharing Element Interface IW05 efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES Technical data Nominal flow Nominal pressure 35 l/min - P=8 bar
6/2 ways/positions flow diverters L (VS151-VS152-VS155)
6/2 ways/positions flow diverters L721... (VS151-VS152-VS155) RE 1832-5 Edition: 2.216 Replaces: 5.214 Size 6 Series 1 Maximum operating pressure 31 bar (45 psi) Maximum flow 6 l/min (15.85 gpm) Ports
p max (see table of performances) Q max (see table of performances) bar Maximum flow rate from port P to A - B - T l/min
41 400/117 ED E*P4 PILOT OPERATED DISTRIBUTOR SOLENOID OR HYDRAULIC (C*P4) CONTROLLED E4P4 CETOP P05 E4R4 ISO 4401-05 E5 ISO 4401-08 p max (see table of performances) Q max (see table of performances)
Stand alone 4/3, 4/2 solenoid operated directional valve
Stand alone 4/3, 4/2 solenoid operated directional valve (LF ) FAN DRIVE (LF ) RE 1835-4 Edition: 2.216 Replaces: 7.12 7.212 LF1 Size 6 LF2 Size 1 Series LF1 Maximum operating pressure 31 (45 ) LF2 Maximum
DL /118 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO p max 280 bar Q max 50 l/min
41 211/118 ED DL3 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO 4401-03 p max 280 bar Q max 50 l/min MOUNTING SURFACE OPERATING PRINCIPLE ISO 4401-03-02-0-05 (CETOP
4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections
4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections RE 183-52/7.12 Replaces: 1.9 1/8 8_8 (EDZ) Size 4 Series Maximum operating pressure 31 bar
6 to14/2 ways/positions bankable flow diverters flangeable
6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-10/07.12 Replaces: 12.09 1/8 L745... (VS281F-VS285F-VS286F-VS287F-VS289F) Size 10 Series 00 Maximum operating pressure 310 bar [4500
4/3-4/2 Directional valve elements LF1_1 (LC1F-Z)
4/3-4/2 Directional valve elements LF1_1 LC1F-Z) RE 18305-01 Edition: 02.2016 Replaces: 07.12 07.2012 Size 6 Series 00 Maximum operating pressure 310 bar 4500 psi) Maximum flow 35 l/min 9.25 gpm) Ports
DSH* /117 ED LEVER OPERATED DIRECTIONAL CONTROL VALVE MOUNTING SURFACES DSH3 ISO DSH5 ISO
41 600/117 ED DSH* LEVER OPERATED DIRECTIONAL CONTROL VALVE MOUNTING SURFACES DSH3 ISO 4401-03 DSH5 ISO 4401-05 p max (see performances table) Q nom (see performances table) OPERATING PRINCIPLE The DSH
4/3-4/2 Directional valve elements B8_0A with or without (EDB-A) secondary relief valves, with or without LS connections B8_0A (EDB-A)
4/3-4/2 Directional valve elements B8_A with or without (EDB-A) secondary relief valves, with or without LS connections B8_A (EDB-A) RE 183-56 Edition: 11.218 Replaces: 7.12 Size 4 Series Maximum operating
3/2 Way Valve G1/8. Data Sheet No E. Characteristics Symbol Unit Description General Features Spool valve.
AP64E00DX00X Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Spool valve Mounting screws M Tube connection Thread Port size ; 7.4 deep
6/2 ways/positions flow diverters
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6/2 ways/positions flow diverters RE 1832-5/12.9 1/8 L721... (VS151-VS152-VS155) Size 6 Series 1 Maximum
6 to 12/2 ways/positions bankable flow diverters flangeable
6 to 12/2 ways/positions bankable flow diverters flangeable RE 18302-08/07.12 Replaces: 12.09 1/8 L711... (VS120F-VS125F) Size 4 Series 00 Maximum operating pressure 310 bar [4500 psi] Maximum flow 20
Functional Description
4/2 Way Solenoid Operated Directional Control Valves Spool SD2E-A4 Type 3/4-16 UNF p max 350 bar (5076 PSI) Q max 30 L/min (7.9 GPM) 01/2005 4/2 Way cartridge valves solenoid operated spool directed Manual
3/2 ways/positions flow diverters L (VS91-VS92-VS95)
3/2 ways/positions flow diverters L706... (VS91-VS92-VS95) RE 18302-03 Edition: 04.2016 Replaces: 02.2016 Size 12 Series 00 Maximum operating pressure 310 bar (4500 psi) Maximum flow 140 l/min (36.98 gpm)
HYDRAULICS VINCKE DIRECTIONAL CONTROL VALVES
VINCKE DIRECTIONAL CONTROL VALVES TECH-DCV200.1 index 3 link to your page / link a su página Monoblock hydraulic distributors Monoblock hydraulic distributors 35 liters 3 P35 Monoblock hydraulic directional
RPEH4-16. Functional Description HA / /2 and 4/3 Way Directional Control Valves Pilot Operated. Replaces HA /2002
4/2 and 4/3 Way Directional Control Valves Pilot Operated RPEH4-16 HA 4023 2/2003 Size 16 p max up to 320 bar Q max up to 300 L/min Replaces HA 4023 2/2002 Solenoid pilot operated directional valves (RPEH)
Available manual, pneumatic, and hydraulic spool control kits.
Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,
SV9A-10-E - Solenoid Valve 4-way, 3-position spool type solenoid valve Up to 36 L/min (9.5 USgpm) 210 bar (3000 psi)
SV9--E - Solenoid Valve -way, -position spool type solenoid valve Up to 6 L/min (9.5 USgpm) bar ( psi) () () (P) (T) In the de-energized position all ports are closed. When solenoid '' is energized flow
Solenoid directional valves type DPHI, DPHU
www.atos.com Table E0805/E Solenoid directional valves type, two stage, ISO 4401 size 10, 16, 25 and 32 37**/HM..... and are spool type, two or three position directional two stage solenoid valves designed
Specifications VH600. Ambient temperature and operating fluid temperature Operating angle Lubrication. Semi-standard
Hand Valve Series VH Specifications VH0 VH0 Fluid Proof pressure Max. operating VH00/00/00 pressure VH0 Ambient temperature and operating fluid temperature Operating angle Lubrication Air.5 MPa.0 MPa MPa
6/2 ways/positions flow diverters L (VS120-VS125-VS129)
6/2 ways/positions flow diverters L710... VS120-VS125-VS129) RE 18302-04 Edition: 05.2014 Replaces: 07.12 Size 4 Series 00 Maximum operating pressure 310 bar 4500 psi) Maximum flow 25 l/min 6.6 gpm) Ports
Specifications VH600. Ambient temperature and operating fluid temperature Operating angle Lubrication
Hand Valve VH Series VH0 Specifications VH0 Fluid Proof pressure Max. operating VH00/00/00 pressure VH0 Ambient temperature and operating fluid temperature Operating angle Lubrication Air.5 MPa.0 MPa MPa
6/2 ways/positions flow diverters
6/2 ways/positions flow diverters RE 18302-07/07.12 Replaces: 12.09 1/8 L753... (VS311-VS312-VS315) Size 10 Series 00 Maximum operating pressure 310 bar [4500 psi] Maximum flow 140 l/min [36,98 gpm] Ports
DL /116 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SERIES 10 SUBPLATE MOUNTING ISO p max 320 bar Q max 125 l/min
41 330/116 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO 4401-05 p max 320 bar Q max 125 l/min MOUNTING INTERFACE OPERATING PRINCIPLE ISO 4401-05-04-0-05 (CETOP 4.2-4-05-320)
4/3-4/2 Directional valve with solenoid actuation
4/3-4/2 Directional valve with solenoid actuation RE 18305-08/12.13 1/10 L5110 LC1-Z ) Size NG6 ISO 4401-03 CETOP RP121 H-03 CETOP 3) Series 00 Maximum operating pressure 350 bar [5076 psi] Maximum flow
ADH /3 AND 4/2
ADH.7... STANDARD SPOOLS FOR ADH.7 CH. I PAGE 53 TECH. SPECIFICATIONS ADH.7... CH. I PAGE 54 SUBPLATES.7... CH. I PAGE 55/56 CETOP 3/NG06 CH. I PAGE 8 STANDARD SPOOLS FOR AD.3.E CH. I PAGE 0 AD.3.E...
4/3 4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections
RA 183-52/1.11 1/1 4/3 4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections B8_8 (EDBZ) Summary Description Page General specifications 1 Ordering
VALVES POWER TRANSMISSION T E C H N I C A L C A T A L O G
VLVES POWER TRNSMISSION T E C H N I C L C T L O G Power transmission POCLIN HYDRULICS Methodology : This document is intended for manufacturers of machines that incorporate Poclain Hydraulics products.
RPE3-04. Functional Description HA /2010. Directional Control Valves Solenoid Operated. Replaces HA /2007
Directional Control Valves Solenoid Operated RPE3-04 Size 04 (D 02) 320 bar (4600 PSI) 30 L/min (8.0 GPM) 10/2010 Replaces 12/2007 4/3-, 4/2- way directional control valves with solenoid control Solenoids
Specifications VH600. Ambient temperature and operating fluid temperature Operating angle Lubrication. 3 (Closed center) 3/4, 1 3 (Exhaust center)
Hand Valve Series VH Specifications VH VH Fluid Proof pressure Max. operating VH// pressure VH Ambient temperature and operating fluid temperature Operating angle Lubrication Air.5 MPa. MPa MPa 5 to C
6 to14/2 ways/positions bankable flow diverters flangeable
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-10/12.09 1/8 L745... (VS281F-VS285F-VS286F-VS287F-VS289F)
PRM2-06. Functional Description HA /2014. Proportional Directional Control Valves. Replaces HA /2013. Size 06 p max 350 bar Q max 40 L/min
Proportional Directional Control Valves Size 06 p max 50 bar Q max 40 L/min PRM-06 HA 5104 /014 Replaces HA 5104 /01 Compact design with integrated High reliability Simple replacement of the exciting coils
Specifications VH600. Ambient temperature and operating fluid temperature. Operating angle Lubrication. Semi-standard
Hand Valve Series VH Specifications Fluid Proof pressure Max. operating VH00/00/00 pressure VH00 Ambient temperature and operating fluid temperature Air.5 MPa.0 MPa MPa -5 to 0 C (No freezing) VH0 VH00
6 to14/2 ways/positions bankable flow diverters flangeable
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-09/12.09 1/10 L732... (VS241F-VS245F-VS246F-VS247F)
RPE3-04. Functional Description HA /2013. Directional Control Valves Solenoid Operated. Replaces HA /2010
Directional Control Valves Solenoid Operated RPE3-04 Size 04 (D 02) 320 bar (4600 PSI) 30 L/min (8.0 GPM) HA 4014 09/2013 Replaces HA 4014 10/2010 4/3-, 4/2- way directional control valves with solenoid
Stand alone 4/3, 4/2 direct acting directional valve LF2_1 (LC2F-DZ)
Stand alone 4/3, 4/2 direct acting directional valve LF2_1 (LC2F-DZ) RE 18305-03 Edition: 02.2016 Replaces: 07.12 07.2012 Size 10 Series 00 Maximum operating pressure 250 bar (3600 psi) Maximum flow 90
4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve
4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve RE 183-54/7.12 Replaces: 1.9 1/8 8_58 (EDZ-VEI) Size 4 Series
GPM PSI LPM BAR MODEL CAVITY PAGE IF-S3A special IF-S3D special IG-S4A special 198
Transmission & Brake Spool Valves Screw-in style GPM PSI LPM BAR MODEL CAVITY PAGE 2 1000 8 70 TC-S3A 5/8-18 186 6 1000 23 70 TF-S3A 7/8-14 188 6 1000 23 70 TF-S3D 7/8-14 190 5 1000 20 70 TG-S4A 7/8-14
Q max 300 l/min. Fluid temperature range C Fluid viscosity range cst Recommended viscosity cst 25
41 420/103 ED DSP7 PILOT OPERATED DISTRIBUTOR SOLENOID OR HYDRAULIC(DSC7) CONTROLLED SERIES 10 CETOP 07 p max (see performance ratings table) Q max 300 l/min MOUNTING INTERFACE CETOP 4.2-4-07-320 The DSP7
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
Monobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves motion and progress 1/220 10 Sectional directional control valves HDS20 Contents 10.1 General specifications 177 10.2 Dimensional data 178 10.3 erformances
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS T E C H N I C A L C A T A L O G Hydraulic components POCLAIN HYDRAULICS Methodology : This document is intended for manufacturers of machines that incorporate
6 to 12/2 ways/positions bankable flow diverters flangeable
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6 to 12/2 ways/positions bankable flow diverters flangeable RE 18302-08/12.09 1/10 L711... (VS120F-VS125F)
3-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow
3-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow A-VRFC3C-VEI-VS-LS 0M.43.21.80 - Y - Z RE 18309-63 Edition: 03.2018 Replaces: 03.2016 Technical
4/3 and 4/2 Proportional directional valve elements L8580 with flow (EDC-P) sharing control (LUDV concept) PATENT PENDING
/ and / Proportional directional valve elements L88 with flow (EDC-P) sharing control (LUDV concept) PATENT PENDING L88 (EDC-P) RE 181-9 Edition:.16 Replaces: 7.1 7.1 Size 6 Series Maximum operating pressure
VRN2-10. Functional Description HA /2008. Pilot Operated Pressure Reducing Valves. Replaces HA /2003
Pilot Operated Pressure Reducing Valves VRN2-0 HA 554 7/2008 Size 0 p max up to 20 bar Q max up to 50 (80) L/min Replaces HA 554 2/200 Screw-in cartridge valve for manifold mounting and stacking assemblies
6406 CONTROL VALVES. Polígono Indutrial O Rebullón s/n Mos - España -
CONROL VALVES Introduction to the company HISORY Over fi fty years experience in fl uid power. Supplier to international manufactures of agricultural, construction, mining, mechanical handling, machine-tool
6/2 ways/positions flow diverters
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6/2 ways/positions flow diverters RE 18302-07/12.09 1/8 L753... (VS311-VS312-VS315) Size 10 Series 00
4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ)
4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ) RE 18301-12 Edition: 02.2016 Replaces: 07.12 07.2012
PRM7-04. Functional Description HA /2012. Proportional Directional Control Valves. Replaces HA /2009
Proportional Directional Control Valves PRM7-6/ Size D () bar (6 PSI) L/min (. GPM ) Replaces /9 Digital control Compact design Operated by proportional solenoids High sensitivity and slight hysteresis
Proportional Flow-Control Cartridges, Size 5
Proportional Flow-Control Cartridges, Size Q max = l/min, p max = bar, Q N = l/min at p bar Leak free, load compensated, two stage Description Series MVRPLSA two-stage proportional flow-control cartridges
p max (see table of performances) Q max (see table of performances) bar Maximum flow l/min see par
41 510/112 ED EXPLOSION-PROOF VERSION SOLENOID OPERATED DIRECTIONAL CONTROL VALVES in compliance with ATEX 94/9/EC MD1K ISO 4401-03 (CETOP 03) E4P4K CETOP P05 E07P4K ISO 4401-07 (CETOP 07) E5P4K ISO 4401-08
Cartridge Valves Technical Information Directional Valves DCV 03
OVERVIEW DCV 03 directional control valves consist of: housing (1), control spool (5), with two centering springs (4), and cylindrical operating solenoids (2, 3). The three-position directional valves
Mounting on manifold strip. Working pressure min./max. Max. particle size 5 µm. Connector standard ISO 15217
1 00137795 Version Spool valve, zero overlap Sealing principle Soft sealing Mounting on manifold strip P-strip Working pressure min./max. See table below Control pressure See table below min./max. Ambient
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
4/3 and 4/2 on-off directional valve elements L8511 with flow (EDC-DZ) sharing control (LUDV concept) L8511 (EDC-DZ)
4/3 and 4/2 on-off directional valve elements L8511 with flow (EDC-DZ) sharing control (LUDV concept) L8511 (EDC-DZ) RE 1831-11 Edition: 6.218 Replaces: 7.12 2.216 Size 6 Series Maximum operating pressure
PRM7-06. Functional Description HA /2006. Proportional Directional Control Valves. Replaces HA /2002
Proportional Directional Control Valves PRM7-6 HA 59 /6 Size D (6)...6 PSI ( bar)...6 GPM ( L/min) Replaces HA 57 / Digital control Compact design Operated by proportional solenoids High sensitivity and
PRM7-06. Functional Description HA /2014. Proportional Directional Control Valves. Replaces HA /2013
Proportional Directional Control Valves PRM7-6 / Size 6 (D ) bar (76 PSI) L/min (.6 GPM) Replaces HA 7 / Digital control Compact design Operated by proportional solenoids High sensitivity and slight hysteresis
Electrically Operated Pressure Relief Cartridge, Size 1 Seated Design, Direct Acting Series WUVA 1LO...
Electrically Operated Pressure Relief Cartridge, Size Seated Design, Direct Acting Series WUVA LO....5 l/min, 40 bar Wet armature solenoid with high pressure core tube and slip on coil Coils can be changed
» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries
HYDRAULIC HW APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS
TXV series. pumps with control. variable displacement piston pumps. TXV - Presentation ADVANTAGES
TXV - Presentation pumps with control variable displacement piston pumps ADVANTAGES Load Sensing. They self regulate to give ust the ow re uired for each movement. truck hydraulics market, TXV pumps are
DIRECTIONAL CONTROL VALVE SOLENOID OPERATED TYPE HD3-ES-*-/10 CETOP MPa HD3 - ES - (1) (C) - * - (024C) (-) / 10
table HD-0/ (07/0) DIRECTIONAL CONTROL VALVE SOLENOID OPERATED TYPE HD-ES-*-/0 CETOP 0-5 MPa /5 HOW TO READ THE MODEL CODE FOR HD-ES - Pressure 5 MPa (50 bar) HD - ES - () (C) - * - (0C) (-) / 0 5 6 7
Variable Displacement Plug-In Motor A6VE
Electric Drives and Controls Hydraulics Linear Motion and Assembly echnologies Pneumatics Service Variable Displacement Plug-In Motor A6VE RE 91 606/06.05 1/16 Replaces: 05.99 echnical data sheet Series
COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES
COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES SD4 Features Simple, compact designed, this valves is only one section for open center and closed center hydraulic systems. H Fittedwithamainpressurereliefvalve.
Seated valve bidirectional Type WVM-4B-Bi
Seated valve bidirectional Type WVM-4B-Bi Features Bidirectional (flow of fluid in both directions, independently of pressure prof) Low pressure drop Direct operated Leakage free Good resistance to corrosion
4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections
4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections RE 18301-12/07.12 1/10 D8_5 (EDD-XZ) Size 8 Series 00 Maximum pressure (pump side) 310 [4500
3/2 ways/positions flow diverters
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 3/2 ways/positions flow diverters RE 18302-02/12.09 1/8 L705... (VS81-VS82-VS84-VS85) Size 6 Series 00
4/3 and 4/2 Proportional directional valve elements L8581 with flow (EDC-P1) sharing control (LUDV concept) PATENT PENDING
4/3 and 4/2 Proportional directional valve elements L881 with flow (EDC-P1) sharing control (LUDV concept) PATENT PENDING L881 (EDC-P1) RE 1831-1 Edition: 6.218 Replaces: 7.12.217 Size 6 Series Maximum
Monoblock Directional Control Valve HDM11S/3PQ
Monoblock Directional Control Valve djustable priority flow to the first section (for agricultural applications) Reference: 200--991229-EN-00 Issue: 09.2015 1/24 Contents age 1 General information... 3
Solenoid directional valves type DPHI and DPHE two stage, ISO 4401 size 10, 16, 25 and 32
www.atos.com Table E0857/E Solenoid directional valves type DPHI and DPHE two stage, ISO 4401 size 10, 16, 25 and 32 DPHE471*/H Spool type, two stage directional valves with solenoids certified according
RPEW4-06. Functional Description HA /2005. Solenoid Operated Directional Control Valves with Wirebox 1/2 NPT 1/2 NPT. Replaces HA /2004
Solenoid Operated Directional Control Valves with Wirebox RPEW4-06 2/2005 Size 06 p max up to 320 bar Q max up to 80 L/min Replaces 2/2004 4/3, 4/2 way directional control valves Four-land spool - reduced
An introduction to Pedro Roquet, S.A.
An introduction to Pedro Roquet, S.A. for the EU Gateway Business Mission to Japan Basic company information Hydraulic products Gear pumps and motors, control valves, cylinders People 362 people Facilities
RNEH4-25. Functional Description HA / /2 and 4/3 Way Directional Control Valves Pilot Operated. Replaces HA /2012
4/2 and 4/3 Way Directional Control Valves Pilot Operated RNEH4-25 HA 4024 7/2015 Size 25 (D 08) 320 bar (4600 PSI) 600 L/min (159 GPM) Replaces HA 4024 6/2012 Solenoid pilot operated directional valves
Extremely compact in size to allow direct flange-mounting on vehicle engine or gearbox PTOs.
TXV - Presentation pumps with Load Sensing control variable displacement piston pumps ADVANTAGES pumps are variable displacement with pressure-flow control called Load Sensing. They self-regulate to give
DSE3B /118 ED DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SERIES 10 SUBPLATE MOUNTING ISO p max 350 bar Q max 40 l/min
83 215/118 ED DSE3B DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SUBPLATE MOUNTING ISO 4401-03 p max 350 bar Q max 40 l/min MOUNTING INTERFACE OPERATING PRINCIPLE ISO 4401-03-02-0-05 (CETOP 4.2-4-03-350)
TPV Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 501 / 1009 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HY-TRANS THE PRODUCTION LINE OF HANSA-TMP Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
PLP Pump (up to 16 cm 3 /r max. 120 bar) PHV Pump (up to 32 cm 3 /r max. 250 bar) PVS Pump (up to 100 cm 3 /r max. 100 bar)
General Catalogue MODEL PLP Pump (up to 16 cm 3 /r max. 120 bar) PHV Pump (up to 32 cm 3 /r max. 250 bar) PVS Pump (up to 100 cm 3 /r max. 100 bar) PSP Pump (up to 100 cm 3 /r max. 160 bar) PSPK Pump (up
SDH Series. Monoblock and Sectional directional valves
SDH Series Monoblock and Sectional directional valves Additional information his catalogue shows the product in the most standard configurations. lease contact Sales Dpt. for more detailed information
SOLENOID DIRECTIONAL VALVE
SOLENOID DIRECTIONAL VALVE type DHE direct operated, high performances, ISO 4401 dimensione 06 Spool type, two or three position direct operated valves with high performance threaded solenoids certified
DSE /117 ED DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SERIES 11 SUBPLATE MOUNTING ISO p max 350 bar Q max 40 l/min
83 2/117 ED DSE3 DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SUBPLATE MOUNTING ISO 41-3 p max 3 bar Q max l/min MOUNTING SURFACE OPERATING PRINCIPLE ISO 41-3-2-- (CETOP 4.2-4-3-3). 33 3.2 21. 12.7.1.7
2/2 Solenoid Cartridge Valve, Size 10
2/2 Solenoid Cartridge Valve, Size 1 Q max = 8 l/min, p max = 3 bar Seat-valve shut-off, two-stage, monitored operating position 1 Description With integral electronic monitoring of operating position
RETURN FILTERS. MATERIALS Head: Aluminium alloy Spin-on cartridge: Steel Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass
COMPONENTS RC MATERIALS Head: Aluminium alloy Spin-on cartridge: Steel Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass APPLICATION EXAMPLE PRESSURE (ISO 10771-1:2002) Max working:
Electrically Operated Pressure Relief Cartridge, Size 16 Seated Pilot Stage, Spool Type Main Stage Series WUVPA 1...
Electrically Operated Pressure Relief Cartridge, Size 16 Seated Pilot Stage, Spool Type Main Stage Series WUVPA 1... 3 l/min, 420 bar Two pressure valve, ON / OFF or HI / LO With internal pilot drain to
CONTENT Axial Piston Motors and Pumps Fixed Displacement. Technical Specification Guide...2. Hydraulic motor MAP Hydraulic motor MAP50...
CONTENT CONTENT Aial Piston Motors and Pumps Fied Displacement PAGE Technical Specification Guide...2 Hydraulic motor...6 Hydraulic motor MAP5...1 Hydraulic motor MAP1...2 MAP5 Hydraulic pump PAP5...29
4/3, 4/2 and 3/2 Directional Valve with Wet-pin AC or DC Solenoid
01/08 /3, /2 and 3/2 Directional Valve with Wet-pin AC or DC Solenoid 2.1 Type WE 10...L5X Size (NG) 10 Up to 350 bar Up to 150 L/min Contents Function and configurations -03 Specifications 0 Symbols 05
B8_58 (EDBZ-VEI) RE Edition: Replaces:
4/3 Directional valve elements 8_58 with or without EDZ-VEI) secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve 8_58 EDZ-VEI) RE 183-54 Edition: 2.216 Replaces:
Eaton. Revised April, Directional Control Valves. Model 30540, 15 GPM Directional Control Valves. We Manufacture. Solutions
s Eaton Revised April, 1996 c Directional Control Valves h i y d l ydraulics r a u u l c a i d r s Model 354, 15 GPM Directional Control Valves Solutions y We Manufacture H S o l u t i o n s Model 354
COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES
COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES Features Simple, compact designed, this valve is only one section for open center and closed center hydraulic systems. H Fitted with a main pressure relief
DIRECTIONAL CONTROL VALVES CETOP3
DIRECTIONAL CONTROL VALVES CETOP3 GENERAL DESCRIPTION RH0...1-...F... Document: DCVC3-1-Aug 2013 4/3- and 4/2- way directional control valves with solenoid operation, heavy duty construction RH0...1-...F...
DFE10. solenoid control monoblock valve. Ordering codes. Description example : Diverter valve DFE10/3 A 18 ES - W VDC - SAE - <CVN>
DFE1 Ordering codes Description example : Diverter valve DFE1/3 18 ES - W 22-12VDC - SE - 1. 4. 5. 3. 5. 2. Valve is supplied painted as standard, with one coat of rimer black antirust paint II 5.
MODULES. Maximum Flow U.S.GPM. Max. Operating Pressure MPa (PSI) L/min. 005 Series 25 (3630) Modular Valves. 01 Series 31.
F MODULES YUKEN's are stack type valves, and require no piping. They not only rationalise system build, but they also meet the technical requirements for a variety of hydraulic systems. Stacking systems
VPP2-04. Functional Description HA /2003. Directly operated pressure relief valves. Replaces HA /2002
Directly operated pressure relief valves VPP-04 HA 5093 /003 Size 04, 06 p max up to 30 bar Q max up to 40 L/min Replaces HA 5093 3/00 Screw-in cartridge, modular and in-line design Six pressure ranges
Documentatie Stuurventielen DL3
Documentatie Stuurventielen DL3 De gegevens in deze documentatie zijn met de grootste zorg samengesteld, maar mogen geen reden zijn om ons aansprakelijk te stellen voor de gevolgen van fouten, die ondanks
Priority valve Type LPS
RE 27 548/10.98 riority valve Type LS Nominal sizes 40 to 160 Series 1X Nominal pressure 250 bar Maximum flow 160 L/min. H/AD/5977/98 riority valve type LS... Contents Description age Features 1 Ordering
RETURN FILTERS. MATERIALS Head: Aluminium alloy Cover & bowl: Polyammide Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass
COMPONENTS RB MATERIALS Head: Aluminium alloy Cover & bowl: Polyammide Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass APPLICATION EXAMPLE PRESSURE (ISO 10771-1:2) Max working: 0 kpa
Commercial Shearing (Pty) Ltd THE WORLDWIDE PROGRAM OF VALVES ISO 9001
Commercial Shearing (Pty) Ltd THE WORLDWIDE PROGRAM OF VALVES ISO 9001 An Insight into Valve Technology CLEAN ROOM ASSEMBLY AND TEST A major investment has been made in a clean-room assembly and test environment.