Delta Planetary Gearbox PS High Precision Series PA Precision Series

Transcription

1 Automation for a Changing World Delta Planetary Gearbox PS High Precision Series PA Precision Series

2 PS Series Planetary Gearbox PS High Precision S The PS Series Planetary Gearbox features many benefits such as low noise, high o smoothly transfer power from motor to applications and is widely applied to various industrial robots, medical devices and precision measurements. Helical Gear Design The speed reduction mechanism employs helical gears, with double the tooth mesh rate when compared with regular spur gears. ln addition, it also features extremely smooth running, low noise, high torque output and low backlash. Synthetic Lubrication Grease The protective class IP65 seals design avoids leakage problems and requires no maintenance. Integrated Planetary Arm Bracket The planetary arm bracket and the output shaft are constructed as one-piece to increase torsional rigidity and accuracy. The entire structure is one-time machined for controlling accuracy in the specified tolerance. One-piece Gearbox & Advanced Surface Treatment The gearbox and internal gear ring are constructed as one-piece. High gear accuracy meets the DIN6 class standard. Gearbox surface is anticorrosive treated to enhance environment resistance and corrosion resistance capabilities. 2

3 eries utput torque and low backlash. It is able to industries including aerospace, semiconductors, Full Needle Roller Bearings Design The planetary gear transmission employs full needle roller bearings without retainer to increase the contact surface, which greatly enhances structural rigidity and service life. High Precision Gear Machining The planetary gear and sun gear are made from high quality Ni-Cr-Mo alloy steel (SNCM220), precision machined and carburized to hardness HRC. Precision teeth grinding assures gear accuracy and attains DIN6 class. It provides better wear resistance, impact resistance and longer service life than gears that are only surface nitrided. Collet Locking Mechanism The input-end and the motor are coupled through a collet locking mechanism. It has passed dynamic balance analysis to assure concentricity and balance for the connection with no backlash for power transmission while running at high speed. Modular Design of Motor Connection Plate The special modular design of the motor connection plate is made from an aluminum alloy that is suitable for all series of Delta servomotors. 3

4 PS High Precision Series Features The Delta Planetary Gearbox is made using high-tech design software, high-precision gear hobbing machines and comprehensive quality control to ensure that it provides highly accurate gear engagement, smooth running and minimum noise. High Stability Employs high tensile strength alloy steel. The gear is made using a vacuum carburizing process to ensure both core and surface hardness, which extends gear service life and maintains high precision after long periods of operation. High Precision Backlash for concentric 1-stage gearbox is under 3 arcmin. Backlash for right angle 1-stage gearbox is under 4 arcmin. High Input Speed Input speed allows for 5,000 RPM. High Torque Higher output torque is in comparison with spur gearbox. High Efficiency Efficiency for 1-stage model exceeds 97%. 2-stage model exceeds 94%. Low Noise Under 65dB. Lifetime Lubrication The protective class IP65 seals design avoids leakage problems and requires no maintenance during the product's lifetime. Model Explanation P S C B1430 Product Name: Planetary Gearbox Motor Interface Code: B1430: F60 / PCDΦ70 / output shaft diameter Φ14 / output shaft length 30mm Series: PS Output Flange Dimensions: 062: 62mm 090: 90mm 120: 120mm 142: 142mm Model Type: C: Concentric (1-stage) A: Concentric (2-stage) R: Right Angle (1-stage) L: Right Angle (2-stage) Ratio: 5: 1/5 10: 1/10 20: 1/20 30: 1/30 Backlash Class: 3: 3 arcmin 4: 4 arcmin 5: 5 arcmin 7: 7 arcmin C1430: F80 / PCDΦ90 / output shaft diameter Φ14 / output shaft length 30mm C1935: F80 / PCDΦ90 / output shaft diameter Φ19 / output shaft length 35mm E2255: F130 / PCDΦ145 / output shaft diameter Φ22 / output shaft length 55mm E2455: F130 / PCDΦ145 / output shaft diameter Φ24 / output shaft length 55mm F3579: F180 / PCDΦ200 / output shaft diameter Φ35 / output shaft length 79mm 4

5 PS Series Compatible Motor Table Type Motor Frame Code Power Rating Output Shaft Diameter (S) & Length (LR) (mm) Stage Ratio Backlash Class Compatible Gearbox Model No. Concentric F W, 400 W Φ14 / 30 1-stage 5, 10 3 PS062-CxxxxB1430 Concentric F W, 750 W Φ14 / 30 1-stage 5, 10 3 PS090-CxxxxC1430 Concentric F W Φ19 / 35 1-stage 5, 10 3 PS090-CxxxxC1935 Concentric F W, 500 W, 600 W, 800 W, 900 W 1 kw, 1.3 kw, 1.5 kw, 1.8 kw, 2 kw Φ22 / 55 1-stage 5, 10 3 PS120-CxxxxE2255 Concentric F130 3 kw Φ24 / 55 1-stage 5, 10 3 PS120-CxxxxE2455 Concentric F180 2 kw, 3 kw, 3.5 kw, 4.5 kw Φ35 / 79 1-stage 5, 10 3 PS142-CxxxxF3579 Concentric F W, 400 W Φ14 / 30 2-stage 20, 30 5 PS062-AxxxxB1430 Concentric F W, 750 W Φ14 / 30 2-stage 20, 30 5 PS090-AxxxxC1430 Concentric F W Φ19 / 35 2-stage 20, 30 5 PS090-AxxxxC1935 Concentric F W, 500 W, 600 W, 800 W, 900 W 1 kw, 1.3 kw, 1.5 kw, 1.8 kw, 2 kw Φ22 / 55 2-stage 20, 30 5 PS120-AxxxxE2255 Concentric F130 3kW Φ24 / 55 2-stage 20, 30 5 PS120-AxxxxE2455 Right-angle F W, 400 W Φ14 / 30 1-stage 5, 10 4 PS062-RxxxxB1430 Right-angle F W, 750 W Φ14 / 30 1-stage 5, 10 4 PS090-RxxxxC1430 Right-angle F W Φ19 / 35 1-stage 5, 10 4 PS090-RxxxxC1935 Right-angle F W, 500 W, 600 W, 800 W, 900 W 1 kw, 1.3 kw, 1.5 kw, 1.8 kw, 2 kw Φ22 / 55 1-stage 5, 10 4 PS120-RxxxxE2255 Right-angle F130 3 kw Φ24 / 55 1-stage 5, 10 4 PS120-RxxxxE2455 Right-angle F180 2 kw, 3 kw, 3.5 kw, 4.5 kw Φ35 / 79 1-stage 5, 10 4 PS142-RxxxxF3579 Right-angle F W, 400 W Φ14 / 30 2-stage 20, 30 7 PS062-LxxxxB1430 Right-angle F W, 750 W Φ14 / 30 2-stage 20, 30 7 PS090-LxxxxC1430 Right-angle F W Φ19 / 35 2-stage 20, 30 7 PS090-LxxxxC1935 Right-angle F W, 500 W, 600 W, 800 W, 900 W 1 kw, 1.3 kw, 1.5 kw, 1.8 kw, 2 kw Φ22 / 55 2-stage 20, 30 7 PS120-LxxxxE2255 Right-angle F130 3 kw Φ24 / 55 2-stage 20, 30 7 PS120-LxxxxE2455 5

6 Specifications PS-C Items Unit Ratio Rated Output Torque N-m Max. Acceleration Torque N-m 5, Times of Rated Output Torque Max. Output Torque N-m 5, 10 3 Times of Rated Output Torque Rated Input Speed rpm 5, 10 3,000 3,000 3,000 3,000 Max. Input Speed rpm 5, 10 6,000 6,000 5,000 5,000 Backlash arcmin 5, Torsional Rigidity N-m / arcmin 5, Max. Radial Force N 5, 10 1,180 3,200 6,800 9,300 Max. Axial Force N 5, ,600 3,400 4,650 Service Life hr 5, 10 S5 Cycle Operation: >30,000 (S1 Continuous Operation: >15,000 hrs) Efficiency % 5, Operating Temperature 5, ºC~ +90 ºC Lubrication 5, 10 Synthetic Grease Protection Class 5, 10 IP65 Mounting Position 5, 10 Any Noise Level db 5, Weight Kg 5, Mass Moment of Inertia kg.cm

7 Dimensions B9 B1 45 B6 B5 B2 B8 B7 C8 C4 B10 A5 C7 C6 A h7 øa4 øc3 øc5h8 øa2 øa7 øa1 (PCD) A6 A8h9 A9 B4 B3 C2 øc1 (PCD) øa3 h6 A VIEW PS-C Items A A A A A A6 M5 x P0.8 M8 x P1.25 M10 x P1.5 M12 x P1.75 A A A B B B B B B B B B B C C2 M5 M6 M8 M12 C C C C6 M5 x P0.8 M6 x P1.0 M8 x P1.25 M10 x P1.5 C C

8 Specifications PS-A Items Unit Ratio Rated Output Torque N-m Max. Acceleration Torque N-m 20, Times of Rated Output Torque Max. Output Torque N-m 20, 30 3 Times of Rated Output Torque Rated Input Speed rpm 20, 30 3,000 3,000 3,000 Max. Input Speed rpm 20, 30 6,000 6,000 5,000 Backlash arcmin 20, Torsional Rigidity N-m / arcmin 20, Max. Radial Force N 20, 30 1,180 3,200 6,800 Max. Axial Force N 20, ,600 3,400 Service Life hr 20, 30 S5 Cycle Operation: >30,000 (S1 Continuous Operation: >15,000 hrs Efficiency % 20, Operating Temperature 20, ºC~ +90 ºC Lubrication 20, 30 Synthetic Grease Protection Class 20, 30 IP65 Mounting Position 20, 30 Any Noise Level db 20, Weight Kg 20, Mass Moment of Inertia kg.cm

9 Dimensions B1 A2 45 øa7 B2 B6 B5 B8 B7 C9 B9 C8 C4 B10 A5 C7 C6 A h7 øa4 C3 øc5h8 øa1 (PCD) A8h9 B4 B3 C2 (PCD) øc1 A9 A6 øa3h6 A VIEW PS-A Items A A A A A A6 M5 x P0.8 M8 x P1.25 M10 x P1.5 A A A B B B B B B B B B B C C2 M5 M6 M8 C C C C6 M5 x P0.8 M6 x P1.0 M8 x P1.25 C C C

10 Specifications PS-R Items Unit Ratio Rated Output Torque N-m Max. Acceleration Torque N-m 5, Times of Rated Output Torque Max. Output Torque N-m 5, 10 3 Times of Rated Output Torque Rated Input Speed rpm 5, 10 3,000 3,000 3,000 3,000 Max. Input Speed rpm 5, 10 6,000 6,000 5,000 5,000 Backlash arcmin 5, Torsional Rigidity N-m / arcmin 5, Max. Radial Force N 5, 10 1,180 3,200 6,800 9,300 Max. Axial Force N 5, ,600 3,400 4,650 Service Life hr 5, 10 S5 Cycle Operation: >30,000 (S1 Continuous Operation: >15,000 hrs Efficiency % 5, Operating Temperature 5, ºC~ +90 ºC Lubrication 5, 10 Synthetic Grease Protection Class 5, 10 IP65 Mounting Position 5, 10 Any Noise Level db 5, Weight Kg 5, Mass Moment of Inertia kg.cm

11 Dimensions PS-R Items A A A A A A6 M5 x P0.8 M8 x P1.25 M10 x P1.5 M12 x P1.75 A A B B B B B B B B B B C C2 M5 M6 M8 M12 C C C C6 M5 x P0.8 M6 x P1.0 M8 x P1.25 M10 x P1.5 C C C C

12 Specifications PS-L Items Unit Ratio Rated Output Torque N-m Max. Acceleration Torque N-m 20, Times of Rated Output Torque Max. Output Torque N-m 20, 30 3 Times of Rated Output Torque Rated Input Speed rpm 20, 30 3,000 3,000 3,000 Max. Input Speed rpm 20, 30 6,000 6,000 5,000 Backlash arcmin 20, Torsional Rigidity N-m / arcmin 20, Max. Radial Force N 20, 30 1,180 3,200 6,800 Max. Axial Force N 20, ,600 3,400 Service Life hr 20, 30 S5 Cycle Operation: >30,000 (S1 Continuous Operation: >15,000 hrs Efficiency % 20, Operating Temperature 20, 30 25ºC~ +90ºC Lubrication 20, 30 Synthetic Grease Protection Class 20, 30 IP65 Mounting Position 20, 30 Any Noise Level db 20, Weight Kg 20, Mass Moment of Inertia kg.cm

13 Dimensions PS-L Items A A A A A A6 M5 x P0.8 M8 x P1.25 M10 x P1.5 A A B B B B B B B B B B C C2 M5 M6 M8 C C C C6 M5 x P0.8 M6 x P1.0 M8 x P1.25 C C C C

14 PA Precision Series Features High Rigidity, High Torque Employs uncaged needle roller bearings with a set design including ring teeth, gearbox and helical gears for high rigidity and output torque High Precision Backlash for 1-stage gearbox is under 8 arcmin. Backlash for 2-stage gearbox is under 12 arcmin. High Efficiency Efficiency for 1-stage model exceeds 95% Efficiency for 2-stage model exceeds 92% Low Noise Uses helical gears capable of meshing to ensure smooth and quiet operation Lifetime Lubrication The protective class IP65 seal design avoids leakage problems and requires no lubrication during the product's lifetime. Model Explanation P A C B1430 Product Name: Planetary Gearbox Series: PA Output Flange Dimensions: 050:52mm 090:90mm 070:70mm 100:102mm 080:80mm 120:120mm Motor Interface Code: A0825:F40/PCDΦ46/ output shaft diameterφ8/output shaft length25mm B1430:F60/PCDΦ70/ output shaft diameterφ14/output shaft length30mm C1430:F80/PCDΦ90/ output shaft diameterφ14/output shaft length30mm C1635:F86/PCDΦ100/ output shaft diameterφ16/output shaft length35mm C1935:F80/PCDΦ90/ output shaft diameterφ19/output shaft length35mm D2245:F100/PCDΦ115/ output shaft diameterφ22/output shaft length45mm E2255:F130/PCDΦ145/ output shaft diameterφ22/output shaft length55mm E2455:F130/PCDΦ145/ output shaft diameterφ24/output shaft length55mm Model Type: C:Concentric (1-stage) A:Concentric (2-stage) Ratio: 3:1/3 4:1/4 5:1/5 7:1/7 10:1/10 15:1/15 20:1/20 25:1/25 30:1/30 35:1/35 40:1/40 50:1/50 70:1/70 100:1/100 Backlash Class: 8:8 arcmin C:12 arcmin 14

15 PA Series Compatible Motor Table Type Motor Frame Code Power Rating Output Shaft Diameter (S) & Length (LR) (mm) Stage Ratio Backlash Class Compatible Gearbox Model No. Concentric F40 50W, 100W Φ8 / 25 1-stage 3, 4, 5, 7, 10 8 PA050-CxxxxA0825 Concentric F60 200W, 400W Φ14 / 30 1-stage 3, 4, 5, 7, 10 8 Concentric F80 400W Φ14 / 30 1-stage 3, 4, 5, 7, 10 8 Concentric F80 750W Φ19 / 35 1-stage 3, 4, 5, 7, 10 8 Concentric F86 750W, 1kW Φ16 / 35 1-stage 3, 4, 5, 7, 10 8 PA050-CxxxxB1430 PA070-CxxxxB1430 PA080-CxxxxB1430 PA080-CxxxxC1430 PA100-CxxxxC1430 PA080-CxxxxC1935 PA090-CxxxxC1935 PA080-CxxxxC1635 PA090-CxxxxC1635 PA100-CxxxxC1635 Concentric F100 1kW, 2kW Φ22 / 45 1-stage 3, 4, 5, 7, 10 8 PA100-CxxxxD2245 Concentric F W, 500W, 600W, 800W, 900W 1kW, 1.3kW, 1.5kW, 1.8kW, 2kW Φ22 / 55 1-stage 3, 4, 5, 7, 10 8 PA100-CxxxxE2255 Concentric F130 3kW Φ24 / 55 1-stage 3, 4, 5, 7, 10 8 PA100-CxxxxE2455 PA120-CxxxxE2455 Concentric F40 50W, 100W Φ14 / 30 2-stage 10, 15, 20, 25, 30, 35, 40,50,70, PA050-AxxxxA0825 Concentric F60 200W, 400W Φ14 / 30 2-stage 10, 15, 20, 25, 30, 35, 40,50,70, PA050-AxxxxB1430 PA070-AxxxxB1430 PA080-AxxxxB1430 Concentric F80 400W Φ14 / 30 2-stage 10, 15, 20, 25, 30, 35, 40,50,70, PA080-AxxxxC1430 PA100-AxxxxC1430 Concentric F80 750W Φ19 / 35 2-stage 10, 15, 20, 25, 30, 35, 40,50,70, PA080-AxxxxC1935 PA090-AxxxxC1935 Concentric F86 750W, 1kW Φ16 / 35 2-stage 10, 15, 20, 25, 30, 35, 40,50,70, PA080-AxxxxC1635 PA090-AxxxxC1635 PA100-AxxxxC1635 Concentric F100 1kW, 2kW Φ22 / 45 2-stage 10, 15, 20, 25, 30, 35, 40,50,70, PA100-AxxxxD2245 Concentric F W, 500W, 600W, 800W, 900W 1kW, 1.3kW, 1.5kW, 1.8kW, 2kW Φ22 / 55 2-stage 10, 15, 20, 25, 30, 35, 40,50,70, PA100-AxxxxE2255 Concentric F130 3kW Φ24 / 55 2-stage 10, 15, 20, 25, 30, 35, 40,50,70, PA100-AxxxxE2455 PA120-AxxxxE

16 Specifications PA Series Items Unit Stage Ratio Rated Output Torque N-m Max. Acceleration Torque N-m 1,2 3 ~ Times the Rated Output Torque Max. Output Torque N-m 1,2 3 ~ Times the Rated Output Torque Rated Input Speed rpm 1,2 3 ~ 100 3,000 Max. Input Speed rpm 1,2 3 ~ 100 5,000 Backlash arcmin 1 3 ~ 10 8 arcmin 2 15 ~ Torsional Rigidity N-m/arcmin 1,2 3 ~ Max. Radial Force N 1,2 3 ~ ,200 1,200 3,200 5,220 Max. Axial Force N 1,2 3 ~ ,600 1,600 Service Life hr 1,2 3 ~ 100 S5 Cycle Operation: > 20,000 (S1 Continuous Operation: > 10,000 hrs) Efficiency % 1 3 ~ ~ Operating Temperature 1,2 3 ~ ~ +90 Lubrication 1,2 3 ~ 100 Synthetic Grease Protection Class 1,2 3 ~ 100 IP65 Mounting Position 1,2 3 ~ 100 Any Noise Level Weight ±2% db Kg Mass Moment of Inertia 1 3 ~ ~ ~ ~ Items Unit Stage Ratio Mass Moment of Inertia kg.cm ~ ~

17 Dimensions PA50 1-stage Motor Interface Code Φ A1 Φ A2 A3 A4 A5 A6 PA50 A M4 46 B M5 60 PA50 2-stage Motor Interface Code Φ A1 Φ A2 A3 A4 A5 A6 PA50 A M4 46 B M

18 Dimensions PA70 1-stage Motor Interface Code Φ A1 Φ A2 A3 A4 A5 A6 A7 A8 PA70 B M PA70 2-stage Motor Interface Code Φ A1 Φ A2 A3 A4 A5 A6 A7 A8 PA70 B M

19 Dimensions PA80 1-stage Motor Interface Code Φ A1 Φ A2 A3 A4 A5 A6 A7 A8 PA80 B M PA80 C M PA80 C M PA80 C M PA80 2-stage Motor Interface Code Φ A1 Φ A2 A3 A4 A5 A6 A7 A8 PA80 B M PA80 C M PA80 C M PA80 C M

20 Dimensions PA90 1-stage Motor Interface Code Φ A1 Φ A2 A3 A4 A5 A6 A7 A8 PA90 C M PA90 C M PA90 2-stage Motor Interface Code Φ A1 Φ A2 A3 A4 A5 A6 A7 A8 PA90 C M PA90 C M

21 Dimensions PA100 1-stage Motor Interface Code Φ A1 Φ A2 A3 A4 A5 A6 A7 A8 PA100 C M PA100 C M PA100 D M PA100 E M PA100 E M PA100 2-stage Motor Interface Code Φ A1 Φ A2 A3 A4 A5 A6 A7 A8 PA100 C M PA100 C M PA100 D M PA100 E M PA100 E M

22 Dimensions PA120 1-stage Motor Interface Code Φ A1 Φ A2 A3 A4 A5 A6 A7 A8 PA120 E M PA120 2-stage Motor Interface Code Φ A1 Φ A2 A3 A4 A5 A6 A7 A8 PA120 E M

23 Calculation Method 01 Calculate Ratio i (Eq.1) 02 Calculate mean output torque T 2m (Eq.2) Mean output torque T 2m < Norminal output torque T 2N To determine Operation mode (S1 or S5) S5: ED < 60% S5: t work < 20min (Eq.3) If operation mode is (S5) then caculate the Max. Acceleration Torque T 2max (Eq.4) Max accleration torque T 2max < accleration torquet 2B Calculate the Mean Output speed n 2m and the Nominal Output speed n 2N of Gearbox (Eq.5) n 2m < n 2N Output Torque Loads on output shaft Output Speed T 2a T 2c T 2p T 2d F 2ra F 2aa F 2rc F 2ac F 2rp F 2ap F 2rd F 2ad n 2c n 2a n 2d n 2p t a t c t cycle Time t d t p 06 Calculate the mean radial force F 2rm (Eq.6) mean radial force F 2rm < Max. radial force F 2rB Eq. 2 T 2m = n 2a t a T 2a 3 + n 2c t c T 2c 3 + n 2d t d T 2d 3 n 2a t a + n 2c t c + n 2d t d 07 Calculate the mean Axial force F 2am (Eq.7) mean axial force F 2am < Max. axial force F 2aB 08 Select the Required Backlash and Shaft Option 09 Order your Gearbox Recommended (for S5 Cyclic Operation) The general design is given for J L i 2 4 J m The optimal design is given for J L i 2 J m Where J L is Load Inertia and J m is Motor Inertia. Eq. 3 Eq. 4 Eq. 5 ED = n 2a = n 2d = n 2m = t a + t c + t d t cycle 1.8 3,000 ~ 5,000 n 2c 2 n 2a t a + n 2c t c + n 2d t d t a + t c + t d,t work = t a + t c + t d t a is the time for acceleration, t c is constant travel, t d is the time for deceleration and t p is the time for pause. T 2max = T mb i k s η T mb is the Max. output torque of the motor and η is the efficiency of the gearbox. k s k s service factor No. of Cycles / hr ~ 1, ,000 ~ 1, ,500 ~ 2, ,000 ~ 3,000 T 2n :please reference catalog "Rated Output Torque" F 2rB :please reference catalog "Max. Radial Force" Eq. 1 i n m n work n m is output speed of the motor, n work is working speed Eq. 6 Eq. 7 n 2N = F 2rm = F 2am = n 1N i n 2a t a F 3 2ra + n 2c t c F 3 3 2rc + n 2d t d F 2rd n 2a t a + n 2c t c + n 2d t d n 2a t a F 3 2aa + n 2c t c F 3 3 2ac + n 2d t d F 2ad n 2a t a + n 2c t c + n 2d t d 23

24 Collet Screw & Set Collar Torque Table Collet Screw Bushing Motor Shaft Input Shaft Set Collar Frame Collet Screw Specifications Screw Grade Tighten Torque (N-m) Clench Torque (N-m) 62 M5 x P M6 x P M8 x P M10 x P

25 Installation Instructions Assembling the Planetary Gearbox with Motor 01 Confirm the compatibility of motor model and gearbox spec. Clean the mounting surface. 02 Remove the motor key. 03 Check motor shaft size If necessary, insert the bushing into the input bore Remove the plug into the adapter plate. Loosen the set collar and align the bolt. 05 Vertically insert motor from the gearbox. 06 Tighten the mounting bolts from bolt 1 to bolt 4 with a torque wrench.! Important 07 Tighten the set collar bolt with the torque wrench. 08 Tighten up the screw plug. 1.You must tighten the motor before tightening the set collar on the motor shaft. 2.Please follow the instruction steps for assembly. Step 6 and step 7 must follow in order. 25

26 26 26 Global Operations 26 Taoyuan Plant 1 Taoyuan Technology Center (Green Building) (Diamond-rated Green Building) Taoyuan Plant

27 27 27 R&D Centers 5 Branch Offices 89 Factories 4 Distributors 635

28 Industrial Automation Headquarters Delta Electronics, Inc. Taoyuan Technology Center 18 Xinglong Road, Taoyuan District, Taoyuan City 33068, Taiwan (R.O.C.) TEL: / FAX: Asia Delta Electronics (Jiangsu) Ltd. Delta Electronics (Jiang Su), Co., Ltd. No Jiangxing East Road, Wujiang Eco & Tech Development Zone, Suzhou City, Jiangsu Province, P.R.C TEL: / FAX: Delta Greentech (China) Co., Ltd. 238 Min-Xia Road, Pudong District, ShangHai, P.R.C TEL: / FAX: Delta Electronics (Japan), Inc. Tokyo Office Minato-ku Shibadaimon, Tokyo , Japan TEL: / FAX: Delta Electronics (Korea), Inc. 1511, Byucksan Digital Valley 6-cha, Gasan-dong, Geumcheon-gu, Seoul, Korea, TEL: / FAX: Delta Electronics Int l (S) Pte Ltd. 4 Kaki Bukit Ave 1, #05-05, Singapore TEL: / FAX: Delta Electronics (India) Pvt. Ltd. Plot No 43 Sector 35, HSIIDC Gurgaon, PIN , Haryana, India TEL : / FAX : Americas Delta Products Corporation (USA) Raleigh Office P.O. Box 12173, 5101 Davis Drive, Research Triangle Park, NC 27709, U.S.A. TEL: / FAX: Delta Greentech (Brasil) S.A. Sao Paulo Office Rua Itapeva, 26-3 andar Edificio Itapeva One-Bela Vista São Paulo-SP-Brazil TEL: / FAX: Europe Delta Electronics (Netherlands) B.V. Eindhoven Office De Witbogt 20, 5652 AG Eindhoven, The Netherlands TEL: +31 (0) / FAX: +31 (0) *We reserve the right to change the information in this catalogue without prior notice. DELTA_IA-Planetary Gearbox_PS-PA_C_EN_