Ø 5. L2 DN-300 (12 ) to DN-400 (16 Class-150 & 300. n x Øs Ø P. N h. 4x900=360 0 Ø 5 Ø P BALL VALVES

Transcription

1 H Ø T Ø R Ø 5 2 DN-300 (12 ) to DN-400 (16 lass-150 & 300 DN-150 (6 ) to DN-300 Ø X Y Ø P M n x Øs N h 4x900=360 0 Ø 5 Ø P R3 nx x ØS ØS ØS A VAVES ØP ØP ØR ØR ØT R 1 V

2 NDEX 2 VAVES The company 5 GENERA HGHGHTS 6 META SEATED A VAVES 14 TRUNNON MOUNTED A VAVES 22 FOATNG ASME A VAVES 30 SEM-TRUNNON A VAVES 34 FOATNG EN-DN A VAVES 40 FOATNG 3-WAY A VAVES 44 SPEA ONSTRUTONS

3 We make valves since 1968 ANADA SPAN Fábrica de válvulas MEXO Fábrica de Válvulas S.A., established in 1968, is a multinational company specialised in the manufacture and sale of high quality industrial valves. The expertise and know how acquired over the years coupled with the continued investments in the design of valves, has made a world renowned company in the field of valve applications. World Wide Valves provides world wide coverage thanks to the strategic locations of its factories and offices: RAS Market sectors develops and designs valves for all applications, but the main focus is in Oil & Gas, hemical, Petrochemical, Pulp & Paper and Energy sectors. Oil hemical Gas Pulp & Papera Petrochemical Energygía

4 RUSSA GOA SERVE, S.A. HNA TEHNA SUPPORT MDDE EAST SNGAPORE DESGN SOUTH AFRA MANUFATURE Global services Fábrica de Válvulas S.A. offers its customers a world wide service, from technical advice to choose the right valve up to the design and manufacture of custom built valves to meet special service requirements. WORD WDE DSTRUTON AFTER-SAES SERVE Our R+D department is always ready to find solutions for severe applications and our global distribution network offers quick availability of valves and an efficient after sales service.

5 Quality assurance Valves are designed and produced to meet the major international standards and we take great care and put a lot of emphasis on QUATY, which provides our customers with a total guarantee and trouble free operation of their process. And in addition, we take great care to make our facilities and our products Environment friendly. Quality Assurance System SO 9001 : 2000 certified by VQ AP Q1 certified by the AMERAN - PETROEUM NSTTUTE PED 97 / 23 / E certified by VQ Products Approvals AP 6D certified by the AMERAN - PETROEUM NSTTUTE E Marking (Module H, ategory ) in accordance with PED 97 / 23 / E certified by VQ Fire Safe SO : 2004 certified by SGS AP 607 3rd., 4th. and 5th. Edition certified by SGS S 6755 Part 2 certified by loyd s Register and SGS GOST R certified for Russian market S 3 (Safety integrity level) Atex EN Environmental ertifications SO : 2004 certified by VQ SO-EN certified by SGS

6 GENERA HGHGHTS Full and Reduced bore Floating and Trunnion mounted ball Soft and Metal seats astings Quality as per ASME Mandatory Appendix to V in ASME valves and Severity evels S3-V3 to DN 1690 and EN in EN-DN valves Polished ball Ra 1 in soft seated valves (in metal seated valves ball is lapped); grinded stem Ra 1.6 Full traceability of shell components, ball and stem as per EN Antistatic device integral with the stem Viton A, Aflas or Kalrez primary stem seal and secondary graphite packing NAE MR wetted parts and bolting as Standard Fire safe as standard construction SO : 2004 and AP607 : 3rd, 4th, 5th edition Fugitive emisions EN-SO S 3 (Safety ntegrity level 3)

7 6 A VAVES META SEATED A VAVES META SEATED ½ - 24 lass lass PN 16 - PN 40 offers also a large range of metal seated ball valves for diferent services (slurries, pulp and liquors, high temperature, abrasive or sticking fluids, control). What is HT-65? HT-65 is a thermal-chemical diffusion process where ferrous parts are heat treated at 565 º (1050 ºF) through an appropriate formulation to assure the interface of the materials being processed. The intrinsic properties of HT-65 are its low coefficient of friction as well as the degree of lubricity in both the dry state as well as under lubrication. This highly lubricious process prevents stainless steel from galling and, once HT-65 is applied, the surface becomes Rockwell 70 in hardness on the scale. The HT-65 layer is highly resistant to wear, seizure & corrosion. Tipically HT-65 penetrates the ferrous matrix to a depth of 0,2 to 0,25 mm (0,0079 to 0,01 ) to form the diffusion zone. Austenitic steels develop an extremely hard & complex compound zone distinctive from all ferrous metals, typically 17 to 22 microns (0,0007 to 0,0009 ) thick and a difussion zone approximately 76 microns (0,003 ) deep. HT-65 components have excellent sliding and running properties, a very low friction coefficient that minimizes the incidence of abrasion due to wear and galling. With HT-65, can assure a bubble tight sealing up to temperatures of 327 º and lass V up to 500 º. ubble tight sealing up to 327 º and lass V up to 500 º ow coefficient of friction Excellent sliding and running properties Hardens the complete surface of ball and seats Other hardening procedure under request (R60, T70, HT2200)

8 A VAVES META SEATED Materials 3516 AM 3540 AM DN 3516 M 3540 M 3515 AM 3530 AM ASME 3515 M 3530 M tem Description Material 1 ody ody connector all 316 S.S. + HT-65 apped 4 Stem See options 5 Seat ring 316 S.S. + HT-65 apped 6 Wrench Nodular ron 7 Gland nut Zinc plated carbon steel AS Disk spring arbon steel ENP arbon Steel 9 Stop plate arbon steel AS Gland AS 303 AS Gland packing Graphite 12 Stem thrust seal 316 S.S. + HT ody connector seal AS 316 +Graphite 14 Stop pin arbon St. Stainless St. 15 Stud (DN 32 to DN 100) A olt A olt DN 933 A Washer Zinc plated carbon steel AS Thrust washer 316 S.S. + HT65 19 Antistatic device Stainless St. 28 Nut (DN 32 to DN 100) A Seat disk spring nconel X Seat Seal See options 39 Stem bushing 25% G.F. PTFE 41 Spacer (DN 40 to DN200) arbon steel AS ocking washer AS Seat Seal Graphite 72 Stem O Ring See options Material A216 Gr.W ( 0,25%) A351 Gr. F8M A216 Gr.W ( 0,25%) A351 Gr. F8M 316 S.S. + HT-65 apped See options 316 S.S. + HT-65 apped Nodular ron Zinc plated carbon steel AS 303 arbon steel ENP arbon Steel arbon steel AS 304 AS 303 AS 316 Graphite 316 S.S. + HT-65 AS Graphite arbon St. Stainless St. A193Gr. 7M A193 Gr. 8M - - DN 933 A4-70 Zinc plated carbon steel AS S.S. + HT65 Stainless St. A194 Gr. 2HM A194 Gr. 8M nconel X-750 See options 25% G.F. PTFE arbon steel AS 304 AS 304 Graphite See options

9 8 A VAVES META SEATED DN 3516 / 3540 / 3316 / 3340 PN 16 / 40 Full ore PN 16. From DN 65 to DN 200 PN 40. From DN 15 to DN 150 M n x Øs H 4x90º=360 SO 5211 DETA Ø T Ø R ONY DN-1/2" & 3/4 " Pressure - Temperature (*) Dimensions of diameters of drills SO 5211 refer to table from page 46. P-ar For other materials consult EN PN PN PN PN Temp ºc PN 16 DN ØP ØR n x ØS ØT H M SO 5211 WEGHT WEGHT TORQUE Kv x F ,1 M22x , x F10 44,5 18,7 M25x x F10 56,5 28,5 M28x x F ,6 M35x , x F ,2 M40x x F M45x PN 40 DN ØP ØR n x ØS ØT H M SO 5211 WEGHT WEGHT TORQUE Kv x F05 11,5 5,7 M12x , x F ,2 M12x , x F ,2 M12x , x F ,2 M16x , x F07 39,5 16,2 M18x , x F07 41,5 18,2 M18x , x F ,1 M22x x F10 44,5 18,7 M25x x F10 56,5 28,5 M28x x F ,6 M35x x F ,2 M40x , (*) Dimensions in mm and weight in kg. (**) Weights and dimensions can be changed without notice.

10 9 A VAVES META SEATED ASME 3515 / 3530 lass 150 / 300 Full ore lass 150. From ½ to 8 lass 300. From ½ to 6 M n x Øs 4x90º=360 H SO 5211 DETA Ø T Ø R ONY DN-1/2" & 3/4 " Pressure - Temperature (*) Dimensions of diameters of drills SO 5211 refer to table from page 46. P-ar For other materials consult ASME PN 50 lass 300 W PN 50 lass 300 F8M PN 50 lass Temp ºc PN 20 lass 150 W PN 20 lass 150 F8M PN 20 lass 150 lass 150 SERES DN øp ør n x øs øt H M SO 5211 WEGHT TORQUE Kv 15 (½ ) ,3 4x15,9 88, F05 11,5 5,7 M12x (¾ ) ,8 4x15,9 98, F ,4 M12x (1 ) ,4 4x15, F ,2 M12x , (1½ ) ,4 4x15, F07 39,5 16,7 M18x (2 ) ,6 4x F07 41,5 17,6 M18x (2½ ) ,7 4x19 177, F ,1 M22x (3 ) ,4 4x F10 44,5 18,7 M25x (4 ) ,5 8x F10 56,5 28,7 M28x (6 ) ,3 8x22,2 279, F ,5 M40x (8 ) ,4 8x22, F M45x lass 300 SERES DN øp ør n x øs øt H M SO 5211 WEGHT TORQUE Kv 15 (½ ) ,7 4x15,9 95, F05 11,5 5,7 M12x (¾ ) ,5 4x19 117, F ,4 M12x (1 ) ,9 4x19 123, F ,2 M12x (1½ ) ,3 4x22,2 155, F07 39,5 16,7 M18x (2 ) x19 165, F07 41,5 17,6 M18x (3 ) ,3 8x22,2 210, F ,1 M22x (4 ) x22, F10 44,5 18,7 M25x (6 ) ,9 12x22,2 317, F10 56,5 28,7 M28x (*) Dimensions in mm and weight in kg. (**) Weights and dimensions can be changed without notice.

11 10 A VAVES META SEATED UDV A VAVES META SEATED UDV ½ - 2 lass lass 1500 The Ultimate Drain Valve (UDV) it is a high temperature special design. The valve has got a monobloc welded body and it is reduced bore. This Valve is designed to support high temperatures at high pressures. Materials META SEATED UDV tem Description.S. ODY S.S. ODY 1 ody A 105 A 479 Type ody connector A 105 A 479 Type all AS HT-65 (*) 4 Stem 17-4 PH + HT-65 (*) 5 Seat ring AS HT-65 6 Wrench GGG-40 7 Gland nut Zinc plated carbon st. AS Disk spring arbon St. E.N.P. arbon St. 9 Stop plate arbon St. AS Gland AS HT Gland packing Graphite 12 Stem thrust seal AS HT Stop pin arbon St. Stainless St. 16 olt DN Zinc plated DN 933 A2 17 Washer arbon St. Stainless St. 18 Thrust washer AS HT Disk spring nconel Spacer arbon St. Stainless St. 46 Washer AS Seat gasket Graphite (*) Other materials under request.

12 11 A VAVES META SEATED UDV ASS 800 AM & M TYPE lass 800 / 1500 Reduced ore lass 800. From ½ to 2 lass From ½ to 2 M FOW N h H 4x90º=360 R ØP 1 Pressure - Temperature (*) Diameter of drills SO 5211 = n x F. P-ar A lbs A lbs * A lbs A lbs * * Not recommended for prolonged use above 427º Temp º ASS 800 DN 1 R ØP N h H M SO 5211 ØD n x F WEGHT ½ NPT 15 37, F04 18,4 6, x M5 M12 x1,5 9 3,5 ¾ NPT 15 37, F04 18,4 6, x M5 M12 x1,5 9 4, NPT 20 42,5 35, F05 18,7 6, x M6 M12 x1, ½ NPT F05 31,5 12, x M6 M16 x1, NPT 38 67, ,5 F07 38,5 16, x M8 M18 x1, ASS 1500 DN 1 R ØP N h H M SO 5211 ØD n x F WEGHT ½ NPT 15 37, F04 18,4 6, x M5 M12x1,5 9 3,5 ¾ NPT 15 37, F04 18,4 6, x M5 M12x1,5 9 4, NPT 20 42,5 35, F05 18,7 6, x M6 M12x1, ½ NPT F05 31,5 12, x M6 M16x1, NPT 38 67, ,5 F07 38,5 16, x M8 M18x1, (*) Dimensions in mm and weight in kg. (**) Weights and dimensions can be changed without notice.

13 12 A VAVES META SEATED TRUNNON A VAVES META SEATED TRUNNON 2-20 lass lass 600 Materials META TO META TRUNNON tem Description AM M 1 ody A 216 Gr. W ( 0.25%) A 351 Gr. F8M 2 ody connector A 216 Gr. W ( 0.25%) A 351 Gr. F8M 3 all Tp HT-65 4 Stem NTRON-50 5 Seat ring Tp HT-65 7 Gland nut Zinc Plated arbon Steel AS Disk spring / Spring arbon St. * E.N.P. arbon St. * 9 Stop plate arbon St. AS Gland ring AS HT-65 AS HT Gland AS-303 AS Gland packing Graphite 12 Stem thrust seal AS HT ody connector seal AS Graphite 14 Stop pin arbon St. Stainless St. 15 Stud A 193 Gr. 7M A 193 Gr. 8M ** 18 Thrust washer 50% S.S. PTFE 19 Antistatic device Stainless St. 21 / 21a all trunnion A 351 Gr. F8M 22 / 22a Trunnion bearing AS PTFE 26 olt DN Zinc Plated DN 912 A2 28 Nut A 194 Gr. 2HM A 194 Gr. 8M ** 32 Spring nconel O Ring FKM -- Note Spring carrier A 351 Gr. F8M 39 Stem bushing 25% G.F. PTFE 39.1 Stem bushing AS PTFE -- Note 2 & Note Spacer arbon St. Stainless St. 43 Key AS ocking washer AS Key arbon St. 50 Drain plug A 105 AS Vent plug A 105 AS O Ring FKM -- Note 1 & Note Seat carrier seal Graphite 58 Spring protection arbon St. Stainless St. 72 O Ring FKM -- Note Stem bushing AS PTFE -- Note 2 & Note dentification plate Stainless St. 471 Retainer arbon St. Stainless St. (*) On request nconel X-750. (**) On request 7M / 2HM Zinc Plated & ichromated. Note 1: Depending on design conditions AFAS, KAREZ or KAREZ Spectrum. Note 2: Only DN-350 & 400 and all Fig Note 3: Over 350º Steel nconel + HT-625 ESQUEMA

14 13 A VAVES META SEATED TRUNNON AST TRUNNON META 2515 / 2530 / 2560 lass 150 / 300 / 600 Full ore lass 150. From 2 to 20 lass 300. From 2 to 20 lass 600. From 2 to 16 n x ØS ØT ØR ØP N h x 90º = 350º 4 x 90º = 350º Pressure - Temperature (*) Dimensions of diameters of drills SO 5211 refer to table from page 46. P-ar PN100 (lass 600) PN50 (lass 300) PN20 (lass 150) 0 Temp ºc META SEATS 2 to 16 For A216 Gr. W only. For other materials consult ASME Series 2515 (lass 150) DN ØP 1 ØQ ØR n x ØS ØT X Y h N WEGHT 50 (2 ) x (3 ) x (4 ) x (6 ) x (8 ) x (10 ) x (12 ) x (14 ) x (16 ) x (18 ) ,9 16x31, ,6 39, (20 ) x31, ,6 42, Series 2530 (lass 300) DN ØP 1 ØQ ØR n x ØS ØT X Y h N WEGHT 50 (2 ) x (3 ) x (4 ) x (6 ) x (8 ) x (10 ) x (12 ) x (14 ) x (16 ) x (18 ) ,9 16x31, ,6 39, (20 ) x31, ,6 42, Series 2560 (lass 600) DN ØP 1 ØQ ØR n x ØS ØT X Y h N WEGHT 50 (2 ) x (3 ) x (4 ) x (6 ) x (8 ) x (10 ) x (12 ) x (*) Dimensions in mm and weight in kg. (**) Weights and dimensions can be changed without notice.

15 14 A VAVES TRUNNON MOUNTED A VAVES A VAVES 3-PEE FORGED TRUNNON MOUNTED 1½ - 42 lass lass 2500 A trunnion ball valve has additional mechanical anchoring of the ball at the top and the bottom, suitable for larger and higher pressure valves. The trunnion mounted ball valves are suitable to stand the harsh service conditions often presented in the hydrocarbon industry and in the gas storage and transportation field. n general, they are recommended for tight shout-off in high pressure and double block and bleed applications. SO 5211 Mounting flange. Non-removable antistatic device. Self lubricating bushings in AS 316 internally coated with PTFE. nconel 750 springs, nternal trunnions avoid potential leakage paths.

16 A VAVES TRUNNON MOUNTED A VAVES Materials 1 50 SERES 6000 & 7000 tem Description AT T T 1 ody A 105N A 350 Gr. F2 lass. 1 A182 F316 2 ody onnector A 105N A 350 Gr. F2 lass. 1 A182 F316 3 all A182 F316 or A351Gr. F8M 4 Stem A 479 Tp Seat Ring RPTFE 10 Gland A 105N A 350 Gr. F2 lass-1 A 479 Tp Gland Packing Graphite 12 Stem Thrust Seal 25% G.F. + PTFE 13 ody onnector Seal Graphite 14 / 14.1 Pin arbon St. arbon St. Stainless St. 15 Stud A 193 Gr. 7M A 320 Gr. 7M A 193 Gr. 8M 19 Antistatic Device Stainless St. 20 Sealant njector arbon St. arbon St. Stainless St. 21 all Trunnion A 479 Tp Trunnion earing AS 316 with inside in PTFE 23 earing PTFE 26 / 26.1 olt A 193 Gr. 7M A 320 Gr. 7M A 193 Gr. 8M 28 Nut A 194 Gr. 2HM A 194 Gr. 7M A 194 Gr. 8M 31 Seat arrier A 479 Tp.316 A182 F Spring nconel O Ring FKM 34 Mounting Flange A 105N A 350 Gr. F2 lass-1 A 479 Tp O Ring FKM 39 Stem ushing AS 316 with inside in PTFE 40 Gasket Graphite 47 Key arbon Steel arbon Steel Stainless St. 50 Drain Plug A 105 A 350 Gr. F2 lass-1 AS Relieve Plug A 105 A 350 Gr. F2 lass-1 AS O Ring FKM 54 Seat arrier Seal Graphite 72 / 72.1 O Ring FKM 75 Stem ushing AS 316 with inside in PTFE 87 heck Valve Stainless St. 89 dentification plate Stainless St. 912 olt DN 912 A2

17 16 A VAVES TRUNNON MOUNTED A VAVES FORGED A VAVES 6015 / 6030 / 6060 / 6090 / 6050 / 6042 Full ore lass 150. From 2 to 24 lass 300. From 2 to 24 lass 600. From 2 to 24 lass 900. From 2 to 24 lass From 2 to 12 lass From 2 to 8 Ø ØA N ØT ØR ØP h n x ØS ØD G H X Y K (*) Dimensions of diameters of drills SO 5211 refer to table from page 46. Pressure - Temperature A105N P-ar 450 lass lass lass lass lass lass Fig (lass 150) P-ar A182 F lass lass lass lass lass lass Temp ºc Temp ºc DN øp øt ør n x øs X Y h N SO 5211 H øa K WEGHT TORQUE v x F , x F x F x F , , x F , , x F , x F , x F , , x F , , x F , , x F , , x F P-ar A350 F2.1 lass 2500 lass 1500 lass 900 lass 600 lass 300 lass Temp ºc (*) Dimensions in mm and weight in kg. (**) Weights and dimensions can be changed without notice.

18 17 A VAVES TRUNNON MOUNTED A VAVES Fig (lass 300) DN øp øt ør n x øs X Y h N SO 5211 H øa K WEGHT TORQUE v x F , x F x F x F , , x F , , x F , x F , x F , , x F , , x F , , x F , , x F Fig (lass 600) DN øp øt ør n x øs X Y h N SO 5211 H øa K WEGHT TORQUE v x F , x F x F x F , , x F , , x F , x F , x F , , x F , , x F , , x F , , x F Fig (lass 900) DN øp øt ør n x øs X Y h N SO 5211 H øa K WEGHT TORQUE v ,1 8 x , F ,5 8 x , F ,9 8 x , F ,5 12 x , F ,7 12 x , F ,9 16 x , F ,4 20 x , F ,8 20 x , F ,9 20 x , F ,8 20 x , F ,3 20 x F ,7 20 x , F Fig (lass 1500) DN øp øt ør n x øs X Y h N SO 5211 H øa K WEGHT TORQUE v ,1 8 x 26 7,92 38, F ,2 8 x 32 7,92 47, F ,3 8 x 35 7, F16 39, ,5 12 x 39 9,52 82, F25 69, ,7 12 x 45 11,13 92, F25 112, ,6 12 x 51 11, F25 110, ,5 16 x 54 14,27 123, F Fig (lass 2500) DN øp øt ør n x øs X Y h N SO 5211 H øa K WEGHT TORQUE v 2 44, ,4 8 x 29 7,92 50, F ,6 8 x 35 9,53 66, F ,0 8 x 42 11,13 76, F ,3 8 x 54 12, F25 78, ,1 12 x 54 14, F25 105, (*) Dimensions in mm and weight in kg. (**) Weights and dimensions can be changed without notice.

19 18 A VAVES TRUNNON MOUNTED A VAVES FORGED A VAVES 7015 / 7030 / 7060 / 7090 / 7050 / 7042 Reduced ore lass 150. From 3 to 30 lass 300. From 3 to 30 lass 600. From 3 to 30 lass 900. From 3 to 30 lass From 3 to 14 lass From 3 to 10 Ø ØA N ØT ØR ØP h n x ØS ØD G H X Y K (*) Dimensions of diameters of drills SO 5211 refer to table from page 46. Pressure - Temperature A105N P-ar 450 lass lass lass lass lass lass Fig (lass 150) P-ar A182 F lass lass lass lass lass lass Temp ºc Temp ºc DN ø øp øt ør n x øs X Y h N SO 5211 H øa K WEGHT TORQUE v 3 x x F , x x F x x F x x F , , x x F , , x x F , x x F , x x F , , x x F , , x x F , , x x F , , x x F P-ar A350 F2.1 lass 2500 lass 1500 lass 900 lass 600 lass 300 lass Temp ºc (*) Dimensions in mm and weight in kg. (**) Weights and dimensions can be changed without notice.

20 19 A VAVES TRUNNON MOUNTED A VAVES Fig (lass 300) DN ø øp øt ør n x øs X Y h N SO 5211 H øa K WEGHT TORQUE v 3 x x F , x x F x x F x x F , , x x F , , x x F , x x F , x x F , , x x F , , x x F , , x x F , , x x F Fig (lass 600) DN ø øp øt ør n x øs X Y h N SO 5211 H øa K WEGHT TORQUE v 3 x x F , x x F x x F x x F , , x x F , , x x F , x x F , x x F , , x x F , , x x F , , x x F , , x x F Fig (lass 900) DN ø øp øt ør n x øs X Y h N SO 5211 H øa K WEGHT TORQUE v 3 x ,5 8 x , F x ,9 8 x , F x ,5 12 x , F x ,7 12 x , F x ,9 16 x , F x ,4 20 x , F x ,8 20 x , F x ,9 20 x , F x ,8 20 x , F x ,3 20 x F x ,7 20 x , F x ,0 20 x , F Fig (lass 1500) DN ø øp øt ør n x øs X Y h N SO 5211 H øa K WEGHT TORQUE v 3 x ,2 8 x 32 7,92 47, F x ,3 8 x 35 7, F x ,5 12 x 39 9,52 82, F16 39, x ,7 12 x 45 11,13 92, F25 69, x ,6 12 x 51 11, F25 112, x ,5 16 x 54 14,27 123, F25 110, x x 60 15,88 133, F Fig (lass 2500) DN ø øp øt ør n x øs X Y h N SO 5211 H øa K WEGHT TORQUE v 3 x , ,6 8 x 35 9,53 66, F x ,0 8 x 42 11,13 76, F x ,3 8 x 54 12, F x ,1 12 x 54 14, F25 78, x ,8 12 x 66 17, F25 105, (*) Dimensions in mm and weight in kg. (**) Weights and dimensions can be changed without notice.

21 20 A VAVES TRUNNON MOUNTED A VAVES A VAVES 2-PEE AST TRUNNON MOUNTED AST TRUNNON 2-16 lass lass 600 Materials AST TRUNNON tem Description AT T 1 ody A 216 Gr. W ( 0.25%) A 351 Gr. F8M 2 ody connector A 216 Gr. W ( 0.25%) A 351 Gr. F8M 3 all A 351 Gr. F8M 4 Stem A 479 Tp Seat ring PTFE 7 Gland nut Zinc Plated arbon Steel AS Disk spring / Spring arbon St. * E.N.P. arbon St. * 9 Stop plate arbon St. AS Gland ring AS-303 AS Gland AS-303 AS Gland packing Graphite 12 Stem thrust seal 25% G.F. PTFE 13 ody connector seal AS Graphite 14 Stop pin arbon St. Stainless St. 15 Stud A 193 Gr. 7M A 193 Gr. 8M ** 18 Thrust washer 25% G.F. PTFE 19 Antistatic device Stainless St. 21 / 21a all trunnion A 351 Gr. F8M 22 / 22a Trunnion bearing AS PTFE 23 earing PTFE 26 olt DN Zinc Plated DN 912 A2 28 Nut A 194 Gr. 2HM A 194 Gr. 8M ** 31 Seat arrier A 351 Gr. F8M 32 Spring nconel O Ring FKM -- Note Spring carrier A 351 Gr. F8M 37 O Ring FKM -- Note Stem bushing 25% G.F. PTFE 39.1 Stem bushing AS PTFE -- Note Spacer arbon St. Stainless St. 43 Key AS ocking washer AS Key arbon St. 50 Drain plug A 105 AS Vent plug A 105 AS O Ring FKM -- Note Seat carrier seal Graphite 58 Spring protection arbon St. Stainless St. 72 O Ring FKM -- Note Stem bushing AS PTFE -- Note dentification plate Stainless St. 471 Retainer arbon St. Stainless St. (*) On request nconel X-750. (**) On request 7M / 2HM Zinc Plated & ichromated. Note 1: Depending on design conditions AFAS, KAREZ or KAREZ Spectrum. Note 2: Only DN-350 & 400 and all Fig ESQUEMA

22 21 A VAVES TRUNNON MOUNTED A VAVES AST A VAVES 2515 / 2530 / 2560 lass 150 / 300 / 600 Full ore lass 150. From 2 to 16 lass 300. From 2 to 14 lass 600. From 2 to 12 ØT n x ØS ØR ØP N h x 90º = 350º 4 x 90º = 350º Pressure - Temperature (*) Dimensions of diameters of drills SO 5211 refer to table from page 46. P-ar PN100 (lass 600) PN50 (lass 300) PN20 (lass 150) PTFE SEATS 2 to 16 For A216 Gr. W only. For other materials consult ASME Temp ºc Series 2515 (lass 150) DN øp ør n x øs øt h N SO 5211 WEGHT TORQUE 50 (2 ) x F M22x1, (3 ) x F M28x1, (4 ) x F M35x (6 ) x F M45x (8 ) x F M45x (10 ) x F M45x2 (*) Dimensions 32 in 175 mm and weight in kg. 300 (12 ) x F (14 ) x F (16 ) x F Series 2530 (lass 300) DN øp ør n x øs øt h N SO 5211 WEGHT TORQUE 50 (2 ) x F M22x1, (3 ) x F M28x1, (4 ) x F M35x (6 ) x F M45x (8 ) x F M45x (10 ) x F M45x2 (*) Dimensions 32 in 263 mm and weight in kg. 300 (12 ) x F (14 ) x F Series 2560 (lass 600) DN øp ør n x øs øt h N SO 5211 WEGHT TORQUE 50 (2 ) x F M22x1, (3 ) x F M28x1, (4 ) x F M35x (6 ) x F (8 ) x F (10 ) x F (*) Dimensions 18 in 460 mm and weight in kg. 300 (12 ) x F (*) Dimensions in mm and weight in kg. (**) Weights and dimensions can be changed without notice.

23 22 A VAVES FOATNG ASME A VAVES A VAVES FOATNG ASME 3/8-10 lass lass 2500 A floating ball valve is a valve with seats supported ball, that is pushed by upstream pressure towards the downstream seat to ensure sealing. The DN of the floating ball valves range is limited by the capability of the seats material to support the pressure, temperature and weight of the ball. ive loaded packing SO 5211 Mounting flange O-ring (Primary stem seal) packing in FKM (*) Non-removable antistatic device avity pressure balancing hole with valve in open position Wide range of seats materials from 196 º up to 343 º ( Therm) nternal body ribs prevent ball from dropping in the event that seats are destroyed by a fire Spirometallic PTFE + graphite (body gasket *) * Other options available

24 A VAVES FOATNG ASME A VAVES Materials ASME tem Description AT T T 1 ody A 216 Gr. W ( 0,25%) A 352 Gr. A 351 Gr. F8M 2 ody connector A 216 Gr. W ( 0,25%) A 352 Gr. A 351 Gr. F8M 3 all A 351 Gr. F8M (DN 15 : 25 A 479 Tp.316) 4 Stem A 479 Tp Seat ring PTFE 6 Wrench Nodular ron 7 Gland nut Zinc plated carbon steel AS 303 AS Disk spring arbon St. E.N.P. arbon St. E.N.P. arbon St. 9 Stop plate arbon St. AS 304 AS Gland AS 303 AS 316 AS Gland packing Graphite 12 Stem thrust seal 25% G.F. PTFE 13 ody connector seal AS PTFE + Graphite 14 Stop pin arbon St. Stainless St. Stainless St. 15 Stud A 193 Gr. 7M A 193 Gr. 7M A 193 Gr. 8M 16 olt DN Zinc plated DN 933 A2 DN 933 A2 17 Washer Zinc plated carbon steel AS 304 AS Thrust washer 25% G.F. PTFE 19 Antistatic device Stainless St. 28 Nut A 194 Gr. 2HM A 194 Gr. 7M A 194 Gr. 8M 39 Stem bushing (DN 25 to 200) 25% G.F. PTFE 41 Spacer (DN 40 to 200) arbon St. AS 304 AS Washer AS-304 AS 304 AS O Ring FKM 89 dentification plate Stainless St.

25 24 A VAVES FOATNG ASME A VAVES ASME 515 / 530 lass 150 / 300 Full ore lass 150. From ½ to 8 lass 300. From ½ to 6 M n x Øs H Ø 5 4x90º=360 Ø T Ø R Ø P SO 5211 Pressure - Temperature (*) Dimensions of diameters of drills SO 5211 refer to table from page 46. P-ar PN50 (lass 300) PN20 (lass 150) PTFE SEATS 8 to 12 For A216 Gr. W only. For other materials consult ASME Temp ºc Fig. 515 (lass 150) DN 15 (½ ) ,3 4x15,9 88, F05 11,5 5,7 M12x (¾ ) ,8 4x15,9 98, F ,4 M12x (1 ) ,4 4x15, F ,2 M12x , (1 ½ ) ,4 4x15, F07 39,5 16,7 M18x (2 ) ,6 4x F07 41,5 17,6 M18x (2 ½ ) ,7 4x19 177, F ,1 M22x (*) Dimensions 16 in mm 60 and weight 550in kg. 80 (3 ) ,4 4x F10 44,5 18,7 M25x (4 ) ,5 8x F10 56,5 28,7 M28x (6 ) ,3 8x22,2 279, F ,5 M40x (8 ) ,4 8x22, F M45x Fig. 530 (lass 300) DN øp ør n x øs øt H M SO 5211 WEGHT TORQUE Kv øp ør n x øs øt H M SO 5211 WEGHT TORQUE Kv 15 (½ ) ,7 4x15,9 95, F05 11,5 5,7 M12x (¾ ) ,5 4x19 117, F ,2 M12x (1 ) ,9 4x19 123, F ,2 M12x (1 ½ ) x22,2 155, F07 39,5 12,2 M18x (2 ) x19 165, F07 41,5 16,2 M18x (3 ) x22,2 210, F10 44,5 18,2 M25x (*) Dimensions 32 in mm 150and weight 1000 in kg. 100 (4 ) x22, F10 56,5 18,1 M28x (6 ) x22,2 317, F ,7 M40x (*) Dimensions in mm, weight in kg and Torque in Nm. (**) Weights and dimensions can be changed without notice.

26 25 A VAVES FOATNG ASME A VAVES ASME 715 / 730 lass 150 / 300 Reduced ore lass 150. From ½ to 10 lass 300. From ½ to 8 M Ø T n x Øs H Ø 5 Ø R Ø P 4x90º=360 SO 5211 Pressure - Temperature (*) Dimensions of diameters of drills SO 5211 refer to table from page 46. P-ar PN50 (lass 300) PN20 (lass 150) PTFE SEATS 1/2 to 4 6 to 8 For A216 Gr. W only. For other materials consult ASME Temp ºc Fig. 715 (lass 150) DN øp ør n x øs øt H M SO 5211 WEGHT TORQUE Kv 15 (½ ) 9, ,3 4x15,9 88, F ,1 M10x , (¾ ) ,8 4x15,9 98, F ,1 M12x , (1 ) ,4 4x15, F ,7 M12x , (1 ½ ) ,4 4x15, F05 33,5 12,2 M16x , (2 ) x F07 41,5 18,2 M18x , (3 ) x F M22x (*) Dimensions 14,3 in mm 40 and weight 300in kg. 100 (4 ) x F10 44,5 18,7 M25x , (6 ) x22,2 279, F12 56,5 28,5 M28x , (8 ) x22, F ,6 M35x Fig. 730 (lass 300) DN øp ør n x øs øt H M SO 5211 WEGHT TORQUE Kv 15 (½ ) 9, ,7 4x15,9 95, F ,1 M10x , (¾ ) ,5 4x19 117, F ,1 M12x , (1 ) ,9 4x19 123, F ,7 M12x , (1 ½ ) x22,2 155, F05 33,5 12,2 M16x , (2 ) x19 165, F07 41,5 18,2 M18x , (3 ) x22,2 210, F M22x (*) Dimensions 21,4 in mm 60 and weight 300in kg. 100 (4 ) x22, F10 44,5 18,7 M25x , (6 ) ,2 317, F12 56,5 28,5 M28x (*) Dimensions in mm, weight in kg and Torque in Nm. (**) Weights and dimensions can be changed without notice.

27 26 A VAVES FOATNG ASME A VAVES ASME 560 lass 600 Full ore lass 600. From 2 to 4 M n x Øs H 4x90º=360 Ø 5 Ø T Ø R Ø P SO 5211 Pressure - Temperature P-ar (*) Dimensions of diameters of drills SO 5211 refer to table from page PN100 (lass 600) NYON SEATS 2 to 4 For A216 Gr. W only. For other materials consult ASME Temp ºc Valve with wrench DN øp ør n x øs øt H M SO 5211 WEGHT TORQUE Kv 50 (2 ) x ,3 450 F ,2 M22x (3 ) x22,3 209,5 211,5 715 F12 55,5 26,7 M35x (4 ) x25, ,5 715 F ,2 M35x Actuator connection DN SO 5211 øa ød n x F G WEGHT 50 (2 ) F , xM10 3 M25x ,9 80 (3 ) F ,5 26, xM12 3 M35x ,3 100 (4 ) F , xM12 3 M35x ,1 (*) Dimensions in mm, weight in kg and Torque in Nm. (**) Weights and dimensions can be changed without notice.

28 27 A VAVES FOATNG ASME A VAVES ASME 660 lass 600 Reduced ore lass 600. From 2 to 4 M n x Øs H Ø 5 Ø T Ø R Ø P 4x90º=360 SO 5211 Pressure - Temperature (*) Dimensions of diameters of drills SO 5211 refer to table from page 46. P-ar PN100 (lass 600) NYON SEATS 2 to 4 For A216 Gr. W only. For other materials consult ASME Temp ºc Valve with wrench DN øp ør n x øs øt H M SO 5211 WEGHT TORQUE Kv 50 (2 ) x F ,7 M22x (3 ) x22,2 209,5 183,3 450 F ,4 M25x (4 ) x25, ,5 715 F10 55,5 26,7 M35x (*) Dimensions in mm, weight in kg and Torque in Nm. (**) Weights and dimensions can be changed without notice.

29 28 A VAVES FOATNG ASME A VAVES ASME 400 lass 800 Full ore lass 800. From 3/8 to 2 M H R1 ØP Ø5 M R2 R3 H R ØP Ø5 2 Pressure - Temperature (*) Dimensions of diameters of drills SO 5211 refer to table from page 46. P-ar Temp ºc PTFE +.G. SEATS Series 400 (PN16) DN øp H M WEGHT TORQUE 20 bar TORQUE 55 bar TORQUE 138 bar 3/8 70 9, ,9 M10x / ,7 11,4 M12x , / ,2 11,9 M12x , ,7 11,9 M12x , ½ ,5 20 M18x M22x , (*) Dimensions in mm and weight in kg. (**) Weights and dimensions can be changed without notice.

30 29 A VAVES FOATNG ASME A VAVES ASME 411 / 411N lass 800 Reduced ore lass 800. From ½ to 2 M H R Ø 5 Ø P 411N 4x900=360 Pressure - Temperature (*) Dimensions of diameters of drills SO 5211 refer to table from page 46. P-ar Temp ºc PTFE +.G. SEATS Fig. 411 / 411N (lass 800) DN øp H M WEGHT TORQUE 20 bar TORQUE 55 bar TORQUE 138 bar ½ ,4 6,8 M12x , ¾ ,4 6,8 M12x , ,7 6,6 M12x ½ ,5 12,4 M16x ,5 38,5 16,2 M18x (*) Dimensions in mm and weight in kg. (**) Weights and dimensions can be changed without notice.

31 30 A VAVES SEM-TRUNON A VAVES A VAVES SEM-TRUNNON ASME A VAVES 8-12 lass lass 300 Materials AST TRUNNON tem Description AM M 1 ody A 216 Gr. W ( 0,25%) A 351 Gr. F8M 2 ody connector A 216 Gr. W ( 0,25%) A 351 Gr. F8M 3 all A 351 Gr. F8M 4 Stem A 479 Tp Seat ring PTFE PTFE 7 Gland nut Zinc plated carbon steel AS Disk spring arbon St. E.N.P. arbon St. 9 Stop plate arbon St. AS Gland AS 303 AS Gland AS 303 AS Gland packing Graphite 12 Stem thrust seal 25% G.F. PTFE 13 ody connector seal AS Graphite 14 Stop pin arbon St. Stainless St. 15 Stud A 193 Gr. 7M A 193 Gr. 8M 18 Thrust washer 25% G.F. PTFE 19 Antistatic device Stainless St. 21 /21a all Trunnion AS /22a Trunnion earing PTFE + 50% SS 23 earing PTFE 26 olt DN Zinc plated DN 912 A2 28 Nut A 194 Gr. 2HM A 194 Gr. 8M 39 Stem ushing 25% G.F. PTFE * 41 Spacer arbon St. Stainless St. 43 Key AS ocking washer AS Key AS Spring Protection arbon St. Stainless St Ring FKM 89 dentification plate Stainless St. 471 Retainer Steel Stainless St. (*) AS PTFE only in DN300 (12 ).

32 31 A VAVES SEM-TRUNON A VAVES ASME 1515 / 1530 lass 150 / 300 Full ore lass 150. From 10 to 12 lass 300. From 8 to 12 Ø T Ø R Ø 5 Ø P n x Øs N h SO 5211 SO 5211 X Y Pressure - Temperature (*) Dimensions of diameters of drills SO 5211 refer to table from page 46. P-ar PN50 (lass 300) PN20 (lass 150) PTFE SEATS 8 to 12 For A216 Gr. W only. For other materials consult ASME Temp ºc Series 1515 (PN 20) DN øp ør n x øs SO 5211 øt X Y h N WEGHT TORQUE Kv 250 (10 ) x25,4 F M45x ,6 28, (12 ) ,8 12x25,4 F ,6 30, , Series 1530 (PN 50) DN øp ør n x øs SO 5211 øt X Y h N WEGHT TORQUE Kv 200 (8 ) ,2 12x25,4 F M45x ,6 39, (10 ) ,4 16x28,4 F M45x ,6 46, , (12 ) ,9 16x31,8 F ,6 49, (*) Dimensions in mm and weight in kg. (**) Weights and dimensions can be changed without notice.

33 32 A VAVES SEM-TRUNON A VAVES EN-DN 1516 / 1540 PN 16 / PN 40 PN 16 Ø T Ø R Ø 5 Ø P n x Øs N h SO 5211 SO 5211 Full ore PN 40 X Y Pressure - Temperature (*) Dimensions of diameters of drills SO 5211 refer to table from page 46. (**) Only DN300 P-ar PN PN Temp ºc PTFE SEATS DN 200 to 300 For only. For other materials consult EN Fig (PN 16) DN øp ør n x øs SO 5211 øt X Y h N WEGHT TORQUE Kv x26 F M45x x26 F Fig (PN 40) DN øp ør n x øs SO 5211 øt X Y h N WEGHT TORQUE Kv x30 F M45x x33 F M45x x33 F (*) Dimensions in mm and weight in kg. (**) Weights and dimensions can be changed without notice.

34 NOTES

35 34 A VAVES FOATNG EN-DN A VAVES A VAVES FOATNG EN-DN DN 15 - DN 200 PN 16 - PN 40 A floating ball valve is a valve with seats supported ball, that is pushed by upstream pressure towards the downstream seat to ensure sealing. The DN of the floating ball valves range is limited by the capability of the seats material to support the pressure, temperature and weight of the ball. ive loaded packing SO 5211 Mounting flange O-ring (Primary stem seal) packing in FKM (*) Non-removable antistatic device avity pressure balancing hole with valve in open position Wide range of seats materials from 196 º up to 343 º ( Therm) nternal body ribs prevent ball from dropping in the event that seats are destroyed by a fire Spirometallic PTFE + graphite (body gasket *) * Other options available

36 A VAVES FOATNG EN-DN A VAVES Materials EN-DN tem Description AT T 1 ody ody connector all A 351 Gr. F8M (DN 15 : 25 A 479 Tp.316) 4 Stem A 479 Tp Seat ring PTFE 6 Wrench Nodular ron 7 Gland nut Zinc plated carbon steel AS Disk spring arbon St. E.N.P. arbon St. 9 Stop plate arbon St. AS Gland AS 303 AS Gland packing Graphite 12 Stem thrust seal 25% G.F. PTFE 13 ody connector seal AS PTFE + Graphite 14 Stop pin arbon St. Stainless St. 15 olt (DN 32 to DN 100 Stud) DN 933 A4-70 (DN 32 to DN 100 : A4-70) 16 olt DN 933 A Washer Zinc plated carbon steel AS Thrust washer 25% G.F. PTFE 19 Antistatic device Stainless St. 28 Nut (DN 32 to DN 100) DN 934 A Stem bushing (DN 25 to DN 200) 25% G.F. PTFE 41 Spacer (DN 40 to 200) arbon St. AS Washer AS 304 AS O Ring FKM 89 dentification plate Stainless St.

37 36 A VAVES FOATNG EN-DN A VAVES EN-DN 516 / 540 PN 16 / 40 Full ore PN 16 PN 40 M H n x Øs 4x90º=360 Ø 5 Ø T Ø R Ø P SO 5211 Pressure - Temperature (*) Dimensions of diameters of drills SO 5211 refer to table from page 46. P-ar PN PN Temp ºc PTFE SEATS DN 15 to 100 DN 125 to 200 For only. For other materials consult EN Fig. 516 (PN 16) DN øp ør n x øs øt H M SO 5211 WEGHT TORQUE Kv x F ,1 M22x x F10 44,5 18,7 M25x x F10 56,5 28,5 M28x x F ,6 M35x , x F ,2 M40x Fig. 540 (PN 40) DN øp ør n x øs øt H M SO 5211 WEGHT TORQUE Kv x F05 11,5 5,7 M12x , x F ,2 M12x , x F ,2 M12x x F ,2 M16x x F07 39,5 16,2 M18x x F07 41,5 18,2 M18x x F ,1 M22x x F10 44,5 18,7 M25x x F10 56,5 28,5 M28x x F ,6 M35x x F ,2 M40x , (*) Dimensions in mm, weight in kg and Torque in Nm. (**) Weights and dimensions can be changed without notice.

38 37 A VAVES FOATNG EN-DN A VAVES EN-DN 316 / 340 PN 16 / 40 Full ore PN 16 PN 40 M n x Øs H 4x90º=360 Ø 5 Ø T Ø R Ø P SO 5211 Pressure - Temperature (*) Dimensions of diameters of drills SO 5211 refer to table from page 46. P-ar Temp ºc PTFE SEATS DN 15 to 50 DN 125 to 100 For only. For other materials consult EN Fig. 340 (PN 16) DN øp ør n x øs øt H M SO 5211 WEGHT TORQUE Kv x F ,1 M22x , x F10 44,5 18,7 M25x x F10 56,5 28,5 M28x Fig. 316 (PN 40) DN øp ør n x øs øt H M SO 5211 WEGHT TORQUE Kv x F05 11,5 5,7 M12x x F ,2 M12x , (**) x F ,7 M16x , x F07 39,5 16,2 M18x , x F07 41,5 18,2 M18x , (*) Dimensions in mm, weight in kg and Torque in Nm. (**) Weights and dimensions can be changed without notice.

39 38 A VAVES FOATNG EN-DN A VAVES EN-DN 512 PN 16 Full ore PN 16 M ØA f8 n x Øs Ø 5 H D n x F G ØD Ø T Ø R Ø P ØH ØH n x F G ONY DN 15, DN 20 & DN 25 E E Pressure - Temperature (*) Dimensions of diameters of drills SO 5211 refer to table from page 46. P-ar Temp ºc Fig. 512 (PN 16) DN ØP 1 ØQ ØR N x ØS ØT X Y h N H M WEGHT x , x , x , x , x , x , x , , , x , , x , x , x , x ,5 (*) Dimensions in mm and weight in kg. (**) Weights and dimensions can be changed without notice.

40 NOTES

41 40 A VAVES FOATNG 3 WAY A VAVES A VAVES FOATNG 3 WAY A VAVES DN 25 - DN 200 PN lass 150 The Three way ball valves, have been designed to divert the flow at 90º in several options between two pipes. Three way ball valves are available with either and double (X) port, or T-port design. The full port design is easily automated and is available with various seat materials. TORQUE VAVE SZE AT MAXMUM DFFERENTA PRESSURE T 25 (1 ) (1 ½ ) (2 ) (2½ ) (3 ) (4 ) (6 ) (8 ) Torque Values in Nm. Kv Values in m3/h. PORT OMNATONS 3 WAY PORT 3 WAY T PORT 3 WAY NVERTED PORT

42 41 12 A VAVES FOATNG 3 WAY A VAVES Materials 916 AT EN-DN ASME 916 T 915 AT 915 T tem Description Material 1 ody ody connector Side over all A 351 Gr. F8M 4 Seat ring PTFE 5 Stem A 479 Type Stem thrust seal 25%GF PTFE 7 O ring FKM 8 Stem packing Graphite 9 Gland AS 303 AS 316 9,1 Stop plate F114 AS Disk spring E.N.P arbon steel 11 ook. Wash. Pointer Rilsan coated arbon St. 12 Gland nut Zinc plated carbon steel AS Antifriction washer 25%GF. PTFE 14 Wrench Nodular iron 15 olt DN 933 A olt DN 933 A Stop bolt A ody cover seal PTFE 52 O ring FKM 52.1 O ring FKM 74 ody connector seal PTFE 89 dentification plate Stainless St. Material A216 Gr. W ( 0,25%) A351 Gr. F8M A216 Gr. W ( 0,25%) A351 Gr. F8M A216 Gr. W ( 0,25%) A351 Gr. F8M A 351 Gr. F8M PTFE A 479 Type %GF PTFE FKM Graphite AS 303 AS 316 F114 AS 304 E.N.P arbon steel Rilsan coated arbon St. Zinc plated carbon steel AS %GF. PTFE Nodular iron DN 933 A4-70 DN 933 A4-70 A4-70 PTFE FKM FKM PTFE Stainless St.

43 42 A VAVES FOATNG 3 WAY A VAVES EN-DN 916 PN 16 Full ore PN 16 n x Øs H M 50 ØQ ØR Ø T A A Pressure - Temperature (*) Dimensions of diameters of drills SO 5211 refer to table from page 46. P-ar Temp ºc PTFE SEATS PN 16 Fig. 916 (PN 16) DN øp A A1 H M øt ør n x øs SO 5211 WEGHT x14 F ,2 M12x x18 F ,2 M18x x18 F ,2 M22x , x18 F ,2 M22x x18 F ,7 M28x x18 F ,2 M36x1, x22 F M48x x22 F M48x3 32 (*) Dimensions in mm and weight in kg. (**) Weights and dimensions can be changed without notice.

44 43 A VAVES FOATNG 3 WAY A VAVES ASME 915 ASS 150 Full ore ASS 150 n x Øs H M 50 ØQ ØR Ø T A A Pressure - Temperature (*) Dimensions of diameters of drills SO 5211 refer to table from page 46. P-ar PTFE SEATS PN 20 lass Temp ºc Fig. 915 (lass 150) DN øp A A1 H M øt ør n x øs SO 5211 WEGHT ,4 4x15,8 F ,2 M12x ½ ,4 4x15,8 F ,2 M18x ,7 4x19 F ,2 M22x ½ , ,7 4x19 F ,2 M22x ,4 4x19 F ,7 M28x ,5 8x19 F ,2 M36x1, ,3 8x22 F M48x ,5 8x22 F M48x3 32 (*) Dimensions in mm and weight in kg. (**) Weights and dimensions can be changed without notice.

45 44 A VAVES SPEA ONSTRUTONS A VAVES SPEA ONSTRUTONS all Valves can be delivered in special constructions as following: STEAM AKET When viscous materials are handled, steam jacketed ball valves are recommended to prevent valve to be blocked in closed position. The maximum steam jacket pressure is 10 ar (1.0 Mpa) and maximum temperature is 260º. AVTY FER Some of the roughest process controls problems involve fluids than can polymerize in place. That means they can polymerize inside body cavities and could block the valve. avity-filler seats are available in PTFE, Stansit, TFM. Applications: Styrene, utadiene, Monomers, Pharmaceuticals, Food process,...

46 45 A VAVES SPEA ONSTRUTONS DOUE PAKNG Today s concern for the containment of fugitive emissions has brought forth in the industry a wide range of stem sealing concepts and designs aimed to eliminating steam leakage. For these applications where it is imperative that fluid containment has to be assured, double packing can be adapted to any ball valve. OW TEMPERATURE OR RYOGEN SERVE ball valves have been widely used in low temperature and cryogenic applications, including some gas treatments processes (NG, Methane, PG ), requiring valves able to be operated and to assure helium leakage rates within specified limits at low temperatures. n these cases offers valves designed with special seats, bonnets and materials for low temperature or cryogenic service. FUY AUTOMATED A VAVES Valves can be delivered with pneumatic, electric, hydraulic or gasover-oil actuators as per costumer requirements.

47 46 A VAVES DMENSONS OF DRS DMENSONS OF DRS AORDNG TO SO 5211 FANGE TYPE DAMETER OF OTS RE NUMER SREWS DAMETER OF DRS F M5 F M5 F M6 F M8 F M10 F M12 F M16 F M20 F M16 F M20 F M30 F M36 F M36 NOTES

48 MORE PRODUTS GATE, GOE & HEK VAVES - STRANERS AESSORES PNEUMAT ATUATOR - EETR ATUATOR - HYDRAU ATUATOR GAS OVER O ATUATOR - WORM GEAR - OKNG DEVES - STEM EXTENSONS V R ohannesburg Tel : Fax : sales.jhb@valve.co.za Durban Tel : Fax : sales@valve.co.za