Aluminium and aluminium alloys Sheet, strip and plate
|
|
- Wilfred Tate
- 5 years ago
- Views:
Transcription
1
2
3 BSI Stndrds Publiction Aluminium nd luminium lloys Sheet, strip nd plte Prt : Mechnicl properties
4 BRITISH STANDARD Ntionl foreword This British Stndrd is the UK implementtion of EN 8-:. It supersedes BS EN 8-: which is withdrwn. The UK prticiption in its preprtion ws entrusted to Technicl Coittee NFE/, Light metls nd their lloys. A list of orgniztions represented on this coittee cn be obtined on request to its secretry. This publiction does not purport to include ll the necessry provisions of contrct. Users re responsible for its correct ppliction. The British Stndrds Institution. Published by BSI Stndrds Limited ISBN ICS 77.. Complince with British Stndrd cnnot confer iunity from legl obligtions. This British Stndrd ws published under the uthority of the Stndrds Policy nd Strtegy Coittee on August. Amendments/corrigend issued since publiction Dte Text ffected
5 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 8- July ICS 77.. Supersedes EN 8-: English Version Aluminium nd luminium lloys - Sheet, strip nd plte - Prt : Mechnicl properties Aluminium et lliges d'luminium - Tôles, bndes et tôles épisses - Prtie : Crctéristiques mécniques Aluminium und Aluminiumlegierungen - Bänder, Bleche und Pltten - Teil : Mechnische Eigenschften This Europen Stndrd ws pproved by CEN on June. CEN members re bound to comply with the CEN/CENELEC Internl Regultions which stipulte the conditions for giving this Europen Stndrd the sttus of ntionl stndrd without ny ltertion. Up-to-dte lists nd bibliogrphicl references concerning such ntionl stndrds my be obtined on ppliction to the CEN-CENELEC Mngement Centre or to ny CEN member. This Europen Stndrd exists in three officil versions (English, French, Germn). A version in ny other lnguge mde by trnsltion under the responsibility of CEN member into its own lnguge nd notified to the CEN-CENELEC Mngement Centre hs the sme sttus s the officil versions. CEN members re the ntionl stndrds bodies of Austri, Belgium, Bulgri, Croti, Cyprus, Czech Republic, Denmrk, Estoni, Finlnd, Former Yugoslv Republic of Mcedoni, Frnce, Germny, Greece, Hungry, Icelnd, Irelnd, Itly, Ltvi, Lithuni, Luxembourg, Mlt, Netherlnds, Norwy, Polnd, Portugl, Romni, Slovki, Sloveni, Spin, Sweden, Switzerlnd, Turkey nd United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION C OMITÉ E UR O PÉEN DE N ORMA LI SA TIO N E UROPÄISCHES KOMITEE FÜR NORMUN G CEN-CENELEC Mngement Centre: Avenue Mrnix 7, B- Brussels CEN All rights of exploittion in ny form nd by ny mens reserved worldwide for CEN ntionl Members. Ref. No. EN 8-: E
6 Contents Pge Europen foreword... Scope... Normtive references... Requirements... List of lloys with mechnicl property limits.... Generl List of lloys nd their mechnicl properties... Annex A (normtive) Rules for rounding... Bibliogrphy...
7 Europen foreword This document (EN 8-:) hs been prepred by Technicl Coittee CEN/TC Aluminium nd luminium lloys, the secretrit of which is held by AFNOR. This Europen Stndrd shll be given the sttus of ntionl stndrd, either by publiction of n identicl text or by endorsement, t the ltest by Jnury 7, nd conflicting ntionl stndrds shll be withdrwn t the ltest by Jnury 7. Attention is drwn to the possibility tht some of the elements of this document my be the subject of ptent rights. CEN shll not be held responsible for identifying ny or ll such ptent rights. This document supersedes EN 8-:. CEN/TC ffirms it is policy tht in the cse when ptentee refuses to grnt licences on stndrdized stndrd products under resonble nd not discrimintory condition, then this product should be removed from the corresponding document. Detils of ny ptents rights identified during the development of this document will be in the CEN list of ptent declrtion received (see CEN/TC decided to revise EN 8-: s follows: Addition of Alloy EN AW- [AlMg, Mn] in Tble ; Correction of Alloy EN AW-9 [Al Mg,MnZnZr] in Tble 8; Correction of Alloy EN AW-8 [Al Mg,Mn,7] in Tble ; Correction of Alloy EN AW-8 [Al Mg] in Tble ; Correction of Alloy EN AW-88 [AlMgMn,] in Tble ; Correction of Alloy EN AW-8 [Al Mg,Mn,9] in Tble ; Correction of Alloy EN AW- [Al MgMn] in Tble ; Addition of lloy EN AW-7 [Al 99,8Mg] in new Tble ; Addition of lloy EN AW- [Al SiMgCuMn] in new Tble ; Addition of lloy EN AW-79 [Al ZnMg] in new Tble 9; Correction of the heders in the lst column hrdness in ll tbles (index ). EN 8 comprises the following prts under the generl title, Aluminium nd luminium lloys Sheet, strip nd plte : Prt : Technicl conditions for inspection nd delivery Prt : Mechnicl properties
8 Prt : Tolernces on dimensions nd form for hot-rolled products Prt : Tolernces on shpe nd dimensions for cold-rolled products According to the CEN-CENELEC Internl Regultions, the ntionl stndrds orgnistions of the following countries re bound to implement this Europen Stndrd: Austri, Belgium, Bulgri, Croti, Cyprus, Czech Republic, Denmrk, Estoni, Finlnd, Former Yugoslv Republic of Mcedoni, Frnce, Germny, Greece, Hungry, Icelnd, Irelnd, Itly, Ltvi, Lithuni, Luxembourg, Mlt, Netherlnds, Norwy, Polnd, Portugl, Romni, Slovki, Sloveni, Spin, Sweden, Switzerlnd, Turkey nd the United Kingdom.
9 Scope This Europen Stndrd specifies the mechnicl properties of wrought luminium nd wrought luminium lloy sheet, strip nd plte for generl engineering pplictions. It does not pply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock) or to specil products such s corrugted, embossed, pinted, sheets nd strips or to specil pplictions such s erospce, cn stock, finstock, for which mechnicl properties re specified in seprte Europen Stndrds. The chemicl composition limits of the lloys re specified in EN 7-. designtions re defined in EN. Normtive references The following documents, in whole or in prt, re normtively referenced in this document nd re indispensble for its ppliction. For dted references, only the edition cited pplies. For undted references, the ltest edition of the referenced document (including ny mendments) pplies. EN 9, Aluminium nd luminium lloys - Specifictions for wrought nd cst products for mrine pplictions (shipbuilding, mrine nd offshore) ASTM G, Stndrd Test Method for Visul Assessment of Exfolition Corrosion Susceptibility of xxx Series Aluminium Alloys (ASSET Test) ASTM G7, Stndrd Test Method for Determining the Susceptibility to Intergrnulr Corrosion of xxx Series Aluminium Alloys by Mss Loss After Exposure to Nitric Acid (NAMLT Test) Requirements The mechnicl properties shll be in conformity with those specified in Cluse or those greed upon between supplier nd purchser nd stted on the order document. List of lloys with mechnicl property limits. Generl Tble to Tble contin mechnicl property limits vlues obtined by tensile testing ccording to EN ISO 89- fter smpling nd fter smple preprtion ccording to EN 8-. They lso contin vlues of bend nd hrdness following smpling nd test methods s described in EN 8-. These vlues re for informtion only. For some lloys they contin provisions relted to inter-grnulr corrosion, exfolition corrosion or stress corrosion testing, see lso EN 8-.. The A vlue is the elongtion mesured over guge length of nd expressed in percent. The A vlue for elongtion is the elongtion mesured over guge length of, initil cross-sectionl re of the test-piece), nd expressed in percent. S o (where S o is the
10 . List of lloys nd their mechnicl properties Tble Aluminium EN AW-A [Al 99,] 8 Tble Aluminium EN AW-7A [Al 99,7] Tble Aluminium EN AW-A [Al 99,8(A)] Tble Aluminium EN AW- [Al 99,] Tble Aluminium EN AW- [Al 99,] Tble Alloy EN AW- [Al CuSiMg] 8 Tble 7 Alloy EN AW-A [Al CuSiMg(A)] Tble 8 Alloy EN AW-7A [Al CuMgSi(A)] Tble 9 Alloy EN AW- [Al CuMg] Tble Alloy EN AW-8A [Al CuMg,Ni] Tble Alloy EN AW- [Al MnCu] Tble Alloy EN AW- [Al MnMg] 8 Tble Alloy EN AW- [Al MnMg,] Tble Alloy EN AW- [Al Mn] Tble Alloy EN AW- [Al Mn,Mg,] Tble Alloy EN AW- [Al SiFe] Tble 7 Alloy EN AW-7 [Al Si,Mn] Tble 8 Alloy EN AW- [Al SiMn] 7 Tble 9 Alloy EN AW- [Al SiMnMgCu] 7 Tble Alloy EN AW- [Al Mg(B)] Alloy EN AW-A [Al 8 Mg(C)] Tble Alloy EN AW- [AlMg,Mn] Tble Alloy EN AW- [AI Mg, MnSiFe] Tble Alloy EN AW- [Al Mg,Mn] Tble Alloy EN AW- [AlMg, Mn] Tble Alloy EN AW-9 [Al MgMn,8] Tble Alloy EN AW- [Al Mg,(C)] 8 Tble 7 Alloy EN AW- [Al Mg,] Tble 8 Alloy EN AW-9 [Al Mg,MnZnZr] Tble 9 Alloy EN AW-7 [Al MgMnZn] Tble Alloy EN AW-8 [Al Mg,Mn,7] Tble Alloy EN AW-8 [Al Mg] 7 Tble Alloy EN AW-88 [AlMgMn,] Tble Alloy EN AW-A [Al Mg,(A)] Pge
11 Tble Alloy EN AW-8 [Al Mg,Mn,] Tble Alloy EN AW- [Al MgMn,] Tble Alloy EN AW-8 [Al Mg,Mn,9] Tble 7 Alloy EN AW-9 [Al MgMn,8(B)] 8 Tble 8 Alloy EN AW-9A [Al MgMn,8(C)] 9 Tble 9 Alloy EN AW- [Al MgMn] 7 Tble Alloy EN AW- [Al MgMn] 7 Tble Alloy EN AW-7 [Al 99,8Mg ] 7 Tble Alloy EN AW-7 [Al Mg] 7 Tble Alloy EN AW- [Al Si,Mg,] 77 Tble Alloy EN AW- [Al Mg,SiMnCu] 77 Tble Alloy EN AW- [Al SiMgCuMn] 78 Tble Alloy EN AW- [Al MgSiCu] 79 Tble 7 Alloy EN AW-8 [Al SiMgMn] 8 Tble 8 Alloy EN AW-7 [Al ZnMgCu] 8 Tble 9 Alloy EN AW-79 [Al ZnMg] 88 Tble Alloy EN AW-7 [Al Zn,Mg] 89 Tble Alloy EN AW-7 [Al Zn,Mg,] 9 Tble Alloy EN AW-7 [Al ZnMgCu] 9 Tble Alloy EN AW-77 [Al Zn,MgCu] 9 Tble Alloy EN AW-A [Al FeSi(A)] 9 7
12 Tble Aluminium EN AW-A [Al 99,] Hrdn ess R p, over up to mx. mx. A A F,, O,, 9,, 9,, 9,, 9 9, t, t,, 9,,,, 9 H,, 9,, 9,, 9,, 9 9, t, t,, 9,,,, 9 H,, 7,, 7 H,, 8, t 8,, 8, t 8,, 8, t, t 8,, 8 7,, 8,, 8 9, 8,, H,, 8,,, 8,, t,, 8,,,, 8, t,, 8, t,, 8 H,,, t 9,,, 9 8
13 Hrdn ess R p, over up to mx. mx. A A,,, t 9 H8,,,,,,,,, H9,,,,,, H,, 8, t 7,, 8, t 7,, 8, t, t 7,, 8,, 7,, 8, 7 H,, 7,,, 7,, t,, 7,,,, 7 8, t, t,, 7 8, t H,,, t 8,,, 8,,, t 8 H8,,,,,,,,, For informtion only. 9
14 Tble Aluminium EN AW-7A [Al 99,7] Hrdness R p, over up to mx. mx. A A F,, O,, 8,, 8,, 9 8,,, t, t 8,,, t, t 8,, 8 H,, 8,, 8,, 9 8,,, t, t 8,,, t, t 8,, 8 H,, 7,, 7 H,,, t,,, t,, 7, t, t,, 9,,,, H,, 7, t,, 7, t, t,, 7,,,, 7, t,, 7 7, t H,,,, t,,,,,,,, H8,,,
15 Hrdness R p, over up to mx. mx. A A,,,,,, t H,, 7, t,, 8, t,,, t, t,,,,,, H,,, t,,, t, t,, 7,,,, 9, t,,, t H,,, t,,,,,, For informtion only.
16 Tble Aluminium EN AW-A [Al 99,8(A)] Hrdness R p, over up to mx. mx. A A F,, O,, 8,, 8 8,, 8,,, t, t 8,,, t, t 8 H,, 8,, 8 8,, 8,,, t, t 8,,, t, t 8 H,, 7,, 7 H,,, t,,, t,, 7, t, t,, 9,,,, H,, 7, t,, 7, t, t,, 7,,,, 7, t,, 7 7, t H,,,, t,,,,,,,, H8,,,,,,,,, t
17 Hrdness R p, over up to mx. mx. A A H,, 8, t,, 9, t,,, t, t,,,,,, H,,, t,,, t, t,, 7,,,, 9, t,,, t H,,, t,,,,,, For informtion only.
18 Tble Aluminium EN AW- [Al 99,] R p, over up to mx. mx. A F,, 7 O,,,,,, H,,,,,, H,, H,,,,,, H,,,,,, H,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, A 8, t,, t,, t, t, t,,,,, t, t,, t,, t,,, t,, t, t, t,, t Hrdness
19 H8,,, H9,,, H,,,,, H,,,,, H,,, R p, over up to mx. mx. A For informtion only.,,,,,,,,,,,,,,,,,,, A, t, t, t,,,,,,,, t,,, t,, t, t, t,, t Hrdness
20 Tble Aluminium EN AW- [Al 99,] Hrdness R p, over up to mx. mx. A A F,, O,, 9,, 9,, 9,, 9 9, t, t,, 9,,,, 9 H,, 9,, 9,, 9,, 9 9, t, t,, 9,,,, 9 H,, 7,, 7,, 7,, 7,, 7,, 7 H,, 8, t 8,, 8, t 8,, 8, t, t 8,, 8 7,, 8,, 8 9, 8,, H,, 8,,, 8,, t,, 8,,,, 8, t
21 Hrdness R p, over up to mx. mx. A A,, 8, t,, 8 H,,, t 9,,, 9,,, t 9 H8,,,,,,,,, H9,,,,,, H,, 8, t 7,, 8, t 7,, 8, t, t 7,, 8,, 7,, 8, 7 H,, 7,,, 7,, t,, 7,,,, 7 8, t, t,, 7 8, t H,,, t 8,,, 8,,, t 8 H8,,,,,,,,, For informtion only. 7
22 Tble Alloy EN AW- [Al CuSiMg] Hrdness R p, over up to mx. mx. A A O,,, t,,,,,,, t, 9,, t 9,,,,, T,, 9,, T,, 9, b, b,, 9, b, b,, 8, b,,,, 9 7 T,, 9, b, b,, 9, b, b,, 8, b,,,, 9 7 T,, 9,,,, T,,, b,, 7 7, b,, 9 7 b,, 8,,,,,, 8
23 Hrdness R p, over up to mx. mx. A A,,,, T,,, b,, 7 7, b,, 9 7 b,, 8,,,,,,,,,, T,, 7,, 9 Whenever new ppliction of this lloy is contemplted, nd if this ppliction involves specil properties such s corrosion resistnce, toughness, ftigue, it is strongly recoended tht the user consult the producer in order to mke precise nd pproprite selection of the mteril. b For informtion only. Apprecibly smller cold bend rdii cn be chieved ieditely fter quenching. 9
24 Tble 7 Alloy EN AW-A [Al CuSiMg(A)] Hrdness R p, over up to mx. mx. A A O,,,,,,,,,,,, T,,,,, b, b,,, b,,,,,,,, 9 7 T,,,,, b, b,,, b,,,,,,,, 9 7 T,,,,, b, b,, 7, b,, 8, b,, 8,,,,,,,,,, 7,,
25 Hrdness R p, over up to mx. mx. A A T,,,,, b, b,, 7, b,, 8, b,, 8,,,,,,,,,, 7,, Whenever new ppliction of this lloy is contemplted, nd if this ppliction involves specil properties such s corrosion resistnce, toughness, ftigue, it is strongly recoended tht the user consult the producer in order to mke precise nd pproprite selection of the mteril. b For informtion only. Apprecibly smller cold bend rdii cn be chieved ieditely fter quenching.
26 Tble 8 Alloy EN AW-7A [Al CuMgSi(A)] Hrdn ess R p, over up to mx. mx. A O,, A, t,,,,,,, t, 9,, t 9,,,,, T,,, b, b,,, b, b,, 8, b,,,, 8 8,, 7 7,,,,,,,, T,,, b, b,,, b, b,, 8, b,,,, 8 8,, 7 7,,,,,,,, T,,,,
27 Hrdn ess R p, over up to mx. mx. A A T,, 9,, 9,, 9 Whenever new ppliction of this lloy is contemplted, nd if this ppliction involves specil properties such s corrosion resistnce, toughness, ftigue, it is strongly recoended tht the user consult the producer in order to mke precise nd pproprite selection of the mteril. b For informtion only. Apprecibly smller cold bend rdii cn be chieved ieditely fter quenching.
28 Tble 9 Alloy EN AW- [Al CuMg] Hrdness R p, over up to mx. mx. A A O,,, t,,,,,,,, t, 9,, t 9,,,,, T,, 7,,, 7, T,,, b, b,,, b, b,,, b, b,, 8, b,,,, 8,, 8 7,, 7,, T,,, b, b,,, b, b,,, b, b,, 8, b,,,, 8,, 8 7,, 7,, T,, 9,, 9,, 8 8
29 Hrdness R p, T8, over up to mx. mx. A A,,,, T8,,,,, T,,,,,,,,,,,,,, 9 9 Whenever new ppliction of this lloy is contemplted, nd if this ppliction involves specil properties such s corrosion resistnce, toughness, ftigue, it is strongly recoended tht the user consult the producer in order to mke precise nd pproprite selection of the mteril. b For informtion only. Apprecibly smller cold bend rdii cn be chieved ieditely fter quenching. Tble Alloy EN AW-8A [Al CuMg,Ni] Hrdness R p, over up to mx. mx. A A T8 >,, 7,, 7,, 7,,,, 9 No dt vilble.
30 Tble Alloy EN AW- [Al MnCu] Hrdness R p, over up to mx. mx. A F,, 9 O,,,,,, H,,,,,, H,, H,,,,,, H,,,,,, H,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, A,,, t,,, t 8, t, t, t, t,,, 8,, t,,,,,, t, t,, t, t, t,
31 Hrdness R p, over up to mx. mx. A A H8,, 7, t,, 7, t,, 7, H9,,,,,, H,,, 7,, 7,, t 7,, 8,, 7,, 9, 7,,, 7 H,, 8, t, t,, 8, t,,, 8, t,,, 8,,, 8 8, t H,, 7,,,, 7,, t,, 7,, H8,,, t 9,,, t 9,,, 9 For informtion only. 7
32 Tble Alloy EN AW- [Al MnMg] Hrdness R p, over up to mx. mx. A F,, O,,,,,, H,,,,,, H,,,, H,,,, H,,, H8,,, H9,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, A, t,,,, t,,,, t, t, t,,, t, t, t, t,, t, t,, t,, t, t, t, t, t
33 Hrdness R p, over up to mx. mx. A A H,,, 8,,,, t 8,,, t, 8,, 7, t 8 H,,, 8,,,, t 8,,, t, 8,, 7, t 8 H,, 7,, t,, 7,,,, 7,, t H,, 7,, t,, 7,,,, 7,, t H,, 8,, 7,, 8,, t 7,, 8, t 7 H,, 8,, 7,, 8,, t 7,, 8, t 7 H8,,, t 79,,, t 79 H8,,, t 79,,, t 79 For informtion only. 9
34 Tble Alloy EN AW- [Al MnMg,] Hrdness R p, over up to mx. mx. A F,, O,,,, H,,,, H,,,, H,,,, H,,, H8,,, H9,, H,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, A,, t,,, t,, t, t, t,,, t, t, t, t,, t,,, t, t, t, t,,, t, t,, t
35 Hrdness R p, over up to mx. mx. A A H,, 7, t, t,, 7, t,,, 7, t H,, 9,,, 9, t,, 9, t H8,,, t 8,,, t 8,, 8 For informtion only.
36 Tble Alloy EN AW- [Al Mn] Hrdness R p, over up to mx. mx. A A F,, O,, 7 7,, 9 7,, 7,,,, 7,, 8, t 7,, 7 H,, 7 7,, 9 7,, 7,,,, 7,, 8, t 7,, 7 H,, 7,, H,, 8, t,, 8, t, t,, 8, t,,, 8,,, 8 7,,, 8 8 H,,,, t,,,,,,,,,,,,,, t,,
37 Hrdness R p, over up to mx. mx. A A H,,, t,,,, t, t,,, t,, 8,,, t H8,, 8, t 8,, 8, t 8,, 8, 8 H9,, 7,, 7,, 7 H,, 7,,, 7 7,, t,, 7 8,,,, 7 9,,, 7, H,,, t, t,,, t,,,, t,,,,,, 8, t H,,,,,,,, t,,,, H8,, 8, t 8,, 8, t 8,, 8, 8 For informtion only.
38 Tble Alloy EN AW- [Al Mn,Mg,] Hrdness R p, over up to mx. mx. A A F,, O,, 9,, 9,, 7, t 9 H,, 9,, 9,, 7, t 9 H,,, t,,, t,,, t H,,, t 8,,, t 8,,, t 8 H,, 7,, 7,, 7 H8,, 9,, 9,, 9 H9,, 7,, 7 H,,,,,, 7 H,,, t 7,,, t 7,,, t 7
39 Hrdness R p, over up to mx. mx. A A H,, 7,, 7,, 7 H8,, 9 7,, 9 7 For informtion only. Tble Alloy EN AW- [Al SiFe] Hrdness R p, over up to mx. mx. A A F,, 9 O,, 9 7 8,, 9 9 8,, 9 8,, 9, 8 H,,, t 8,,, t 8,,, t 8 H,,,,,,,,,
40 Hrdness R p, over up to mx. mx. A A T b,, For informtion only.,,,, 8,, b The T temper is not normlly supplied by the producers of wrought products such s circles, strips nd sheets. It is obtined by rpid cooling fter heting t reltively elevted temperture, bove C. This therml cycle is routinely chieved when enmelling the finished products mde out of this lloy, such s frying pns, pressure cookers, pns, etc. Tble 7 Alloy EN AW-7 [Al Si,Mn] Hrdness b b R p, over up to mx. mx. A Fb,, O,,,,, H,,,,, H,,, No dt vilble. For informtion only.,,,,,,,,,,,,, 9 9 A
41 Tble 8 Alloy EN AW- [Al SiMn] Hrdnes s R p, b over up to mx. mx. A A O,, H,, H,, 7,, 7 H,,,, H,, 7,, 7 H8,, 7 b No dt vilble. For informtion only. Tble 9 Alloy EN AW- [Al SiMnMgCu] rdius Hrdness R p, over up to mx. mx. A A O,, H,, H,,,, t H,,,, 7 H8,, 7 H,, - 7 For informtion only. 7
42 Tble Alloy EN AW- [Al Mg(B)], lloy EN AW-A [Al Mg(C)] Hrdness R p, over up to mx. mx. A A F,, O,, 9,, 9 9,,, t 9,,,, 9,,, t 9,, 9 H,, 9,, 9 9,,, t 9,,,, 9,,, t 9,, 9 H,, 9, 9,, 9,, t 9,, 9, t, 9,, 9, 9,, 9 7, 9 H,, 8,, t 8,, 8,, 8,, 8, t, 8,, 8, 8,, 8, t 8 H,,,,,, t,,,,,, t 8
43 Hrdness R p, over up to mx. mx. A A H8,, 8, t 8,, 8, t 8,, 8, 8 H9,, 8,, 8,, 8 H,,, 8,,,, t 8,,, t, 8,, 8, 8,,, 8 H,,, 8,,,, t 8,,, t, 8,, 8, 8,,, 8 H,, 8, t, t 7,, 8, t, 7,, 8,, 7,, 8, 7,, 8 8, t 7 H,, 8, t, t 7,, 8, t, 7,, 8,, 7,, 8, 7,, 8 8, t 7 9
44 Hrdness R p, over up to mx. mx. A A H,,,,,, t,,,,,, t H,,,,,, t,,,,,, t H8,, 8, t 8,, 8, t 8,, 8, 8 H8,, 8, t 8,, 8, t 8,, 8, 8 For informtion only.
45 Tble Alloy EN AW- [AlMg,Mn] Hrdness R p, over up to mx. mx. A F,, O,,,, H,,,, H,,,, H,,,, H,,, H8,,, H9,,, H,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, A,,, t, t,,,, t, t, t, t,,,,,, t,, t, t,, t,,, t,, t, t,, t,, t
46 Hrdness R p, over up to mx. mx. A A H,,,,,, 7 7 7, t, t,, t,, t H,,,,,, 9 9 9,,, t,, t, H8,,,,,, 7 7 7,, t, For informtion only.
47 Tble Alloy EN AW- [AI Mg,MnSiFe] Hrdness R p, over up to mx. mx. A O H H 8 9 7, H, H, No dt vilble.,,, A
48 Tble Alloy EN AW- [Al Mg,Mn] Hrdness R p, b over up to mx. mx. A A H,8,8 7 H,8,8 7 H,, 7 H,, 7 b No dt vilble. For informtion only. Tble Alloy EN AW- [AlMg, Mn] rdius b Hrdness R p, over up to mx. mx. A A O,, 8, t,, 8, H,, 8, t,, 8, H,, H8,, H9,, 7,, b No dt vilble. For informtion only.
49 Tble Alloy EN AW-9 [Al MgMn,8] Hrdness R p, over up to mx. mx. A F,, A O,,, t,,, t, t,,,,,, 8,,,, 8,,, 7 H,,, t,,, t, t,,,,,, 8,,,, 8,,, 7 H,,,, 8,,,, H,, 7 7,, 7 7,, 7 7,, 7 7 7,, 7 7 9,, H,, 7,, 7,, 7,, 7,, 7,, 7
50 Hrdness R p, over up to mx. mx. A A H,,,,,,,, H8,, 88,, 88,, 88 H,, 7 7, t, t,, 7 8, t,,, 7,, t,, 7, t,, 7, t,, 7 9 H,, 7 7, t, t,, 7 8, t,,, 7,, t,, 7, t,, 7, t,, 7 9 H,,, t, 7,,, t, t 7,, 7, t, 7,, 8, t 7,,, 7,, 8 7 H,,, t, 7,,, t, t 7,, 7, t, 7,, 8, t 7,,, 7,, 8 7
51 Hrdness R p, over up to mx. mx. A A H,,, t 78,,, 78,,, 78,,, t 78 H,,, t 78,,, 78,,, 78,,, t 78 H8,, 87,, 87,, 87 H8,, 87,, 87,, 87 For informtion only. 7
52 Tble Alloy EN AW- [Al Mg,(C)] Hrdness R p, over up to mx. mx. A F,, O,,,,,, H,,,,,, H,,, H,,, H,,,, H,,,, H8,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, A, t, t,,,,, t,, t,, t,,, t, t,, t, t
53 Hrdness R p, over up to mx. mx. A A H,,,,,,,, ,,, t, t,, t H,,,,,,,, ,,, t, t,, t H,,,,,,,, , t, t,, t,, t, H,,,,,,,, , t, t,, t,, t, H,,,,,,,, ,, t, t, H,,,,,,,, ,, t, t, H8,,,,,,, t, t H8,,,,,,, t, t For informtion only. 9
54 Tble 7 Alloy EN AW- [Al Mg,] Hrdness R p, over up to mx. mx. A F,, A O,, 7 7,, 7 7,, 7, t, t 7,, 7 8, 7,, 9,,, 8 H,, 7 7,, 7 7,, 7, t, t 7,, 7 8, 7,, 9,,, 8 H,, 7,, 7 7 7,, H,,,,,,,, 8,,,, 9 H,, 9,, 9,, 9,, 9,, 9,, 9
55 Hrdness R p, over up to mx. mx. A A H,, 7,, 7,, 7,, 7 H8,, 7 8,, 7 8,, 7 8 H,,, t, t,,, t,,, 7, t, t,,, t,,, t,, H,,, t, t,,, t,,, 7, t, t,,, t,,, t,, H,,,, t 7,,,, t 7,,,, 7,, 7, t 7,, 9, 7,, 9 7 H,,,, t 7,,,, t 7,,,, 7,, 7, t 7,, 9, 7,, 9 7
56 Hrdness R p, over up to mx. mx. A A H,,, t 7,,, 7,,, 7,,, t 7 H,,, t 7,,, 7,,, 7,,, t 7 H8,, 7 8,, 7 8,, 7 8 H8,, 7 8,, 7 8,, 7 8 For informtion only.
57 Tble 8 Alloy EN AW-9 [Al Mg,MnZnZr] Hrdness R p, b over up to mx. mx. A A O,, --, t,,,,, H,, --, t,,,,, H,,,,,,,, H c,, ,,, 7 7,,, 7 7,, H c,, ,,, 7 7,,, 7 7,, For informtion only. b No dt vilble. c Mteril supplied in the H or H temper shll be cpble of meeting the exfolition nd intergrnulr corrosion performnce specified in EN 9 using test methods detiled in ASTM G nd ASTM G7.
58 Tble 9 Alloy EN AW-7 [Al MgMnZn] Hrdnes s R p, b over up to mx. mx. A A O,, 7 8,, H,, 7 8,, For informtion only. No dt vilble. b Tble Alloy EN AW-8 [Al Mg,Mn,7] Hrdness R p, over up to mx. mx. A A F,,,, O,, 7,, t 7,, 7,, 7,, 7, t, 7,, 7, t 7,, 7, t 7,, 7 7,, 7 7,, 7,, 9,, 9 9,, 9 9
59 Hrdness H,,,,,,,,,,, R p, over up to mx. mx. A,,,,,,,,,,, A 9,,, t, t,,, t, t H,, 7 7,, 7 7,, 7 7,, 7 H b,, 8 8,, 89,, 8, t 89,, 8, 89,, 8 89,, H b,, 8 8,, 89,, 8, t 89,, 8, 89,, 8 89,, H,, 7 9,, 7 9,, 7 9,, 7 9,, 7 7 9,,
60 Hrdness R p, over up to mx. mx. A A H,,,,,,,,,,,, H,, 8,, 8,, 8,, 8 H,,,, t 89,,,, t 89,, 7,, 89,, 8, t 89,,, t 89,, 9 89 H,,,, t 89,,,, t 89,, 7,, 89,, 8, t 89,,, t 89,, 9 89 H,,, 99,,, 99,,, t 99,, 7, t 99,, 8, t 99,, 7 99
61 Hrdness R p, over up to mx. mx. A A H,,, 99,,, 99,,, t 99,, 7, t 99,, 8, t 99,, 7 99 H,,,,,,,, H,,,,,,,, For informtion only. b Mteril supplied in the H or H temper shll be cpble of meeting the exfolition nd intergrnulr corrosion performnce specified in EN 9 using test methods detiled in ASTM G nd ASTM G7. Tble Alloy EN AW-8 [Al Mg] Hrdness R p, over up to mx. mx. A F,, A O,,,, t,,,,,,,,,,, t, t,, 7, t,, 7
62 Hrdness R p, over up to mx. mx. A A H,,,, t,,,,,,,,,,, t, t,, 7, t,, H,, 8 9,, 9,, H b,, 7 9 8,, 8,, 7 9 9, t 8,, 7 9, t 8,, H b,, 7 9 8,, 8,, 7 9 9, t 8,, 7 9, t 8,, H,, 7 8,, 7 8,, 7 8,, 7 8,, 7 7 8,, 7 8 H,,,,,,,,,,,, 8
63 Hrdness R p, over up to mx. mx. A A H,, ,, ,, ,, H8,,,,,, H,, 7 8,, t,, 7 8,, t,, 7 8 7,,,, 7 8 8, t,, 7 8, t,, H,, 7 8,, t,, 7 8,, t,, 7 8 7,,,, 7 8 8, t,, 7 8, t,, H,,, t, 88,,, t, 88,,, t, t 88,, 7, t 88,, 8, t 88,, 7 88 H,,, t, 88,,, t, 88,,, t, t 88,, 7, t 88,, 8, t 88,,
64 Hrdness R p, over up to mx. mx. A A H,, 8 9,, 8 9,, 8 9,, 8 9 H,, 8 9,, 8 9,, 8 9,, 8 9 For informtion only. b Mteril supplied in the H or H temper shll be cpble of meeting the exfolition nd intergrnulr corrosion performnce specified in EN 9 using test methods detiled in ASTM G nd ASTM G7. Tble Alloy EN AW-88 [AlMgMn,] Hrdnes s R p, b over up to mx. mx. A A O,, 8, t,,, 8, t, H,, 8, t,,, 8, t, b For informtion only. No dt vilble.
65 Tble Alloy EN AW-A [Al Mg,(A)] Hrdne ss R p, over up to mx. mx. A A F,, O,, 7 8, t, t 8,, 7 8, t, t 8,, 7 8,, 8,, 7 8 7, t 8,, 7 8 8, t 8,, H,, 7 8, t, t 8,, 7 8, t, t 8,, 7 8,, 8,, 7 8 7, t 8,, 7 8 8, t 8,, H,, 8,, 9 9,, 9 H,, 7,, 7,, 7,, 7,, 7 7,, 7 H,, 7 8,, 7 8,, 7 8,, 7 8,, 7 8,, 7 8
66 Hrdne ss R p, over up to mx. mx. A A H8,, 7 9,, 7 9,, 7 9 H9,, 8,, 8 H,,, t, t 7,,, t, 7,, 7,, 7,, 8, t 7,,, 7,, 9 7 H,,, t, t 7,,, t, 7,, 7,, 7,, 8, t 7,,, 7,, 9 7 H,, 7, t,,, 7, t,,, 7,, t,, 7 7,,, 7 8,,, 7 7 H,, 7, t,,, 7, t,,, 7,, t,, 7 7,,, 7 8,,, 7 7
67 Hrdne ss R p, over up to mx. mx. A A H,, 87,, 87,, 87,, 87 H,, 87,, 87,, 87,, 87 H8,, 9,, 9,, 9 H8,, 9 For informtion only.,, 9,, 9 Tble Alloy EN AW-8 [Al Mg,Mn,] Hrdness R p, over up to mx. mx. A F,, O,,,,,, H,,, H9,, For informtion only.,,,,, A,,,,,,
68 Tble Alloy EN AW- [Al MgMn,] Hrdness R p, over up to mx. mx. A A F,, O,,,,,,, t, t,, 8,,, 8,,, 8 H,,,,,,, t, t,, 8,,, 8,,, 8 H,,, 8,,,, 8,,,, 8,, 8, t 8,,, t 8,, 8 H,, 7, t, t,, 7, t, t,, 7, t, t,, 7, t,, 7, H,, 7, t, 7,, 7, t, t 7,, 7, t, 7,, 7, 7
69 Hrdness R p, over up to mx. mx. A A H8,, 79,, 79,, 79 H,,, t,,, t,,, 8, t,,,, t,,, t,, H,,, t,,, t,,, 8, t,,,, t,,, t,, H,,,, t,,,, t,,,, t,, 8, t,,, H,,,, t,,,, t,,,, t,, 8, t,,, H,, 7 7,, 9,, 7 7,, t 9,, 7 7,, 9,, 7 7 7, 9
70 Hrdness R p, over up to mx. mx. A A H,, 7 7,, 9,, 7 7,, t 9,, 7 7,, 9,, 7 7 7, 9 H8,, 77,, 77,, 77 H8,, 77,, 77,, 77 For informtion only. Tble Alloy EN AW-8 [Al Mg,Mn,9] Hrdness R p, over up to mx. mx. A O,, A,, t 8,,,, 8,,, t, 8,,, t 8,,, t 8,, 8,, 8,, 7 7,, 7 7
71 Hrdness R p, over up to mx. mx. A H,, A,, t 8,,,, 8,,, t, 8,,, t 8,,, t 8,, 8,, 8,, 7 7,, 7 7 H,, 8,, 8,, 8 H b,, 8,,,,, t,,,,,,, 8 H b,, 8,,,,, t,,,,,,, 8 H,,,, t,,,, t,, 7,,,, 8, t,,, t,, 9 7
72 Hrdness R p, over up to mx. mx. A H,, A,, t,,,, t,, 7,,,, 8, t,,, t,, 9 H,, 7,,, 7,,, 7, t,, 7 7, t,, 7 8, t,, 7 7 H,, 7,,, 7,,, 7, t,, 7 7, t,, 7 8, t,, 7 7 For informtion only. b Mteril supplied in the H or H temper shll be cpble of meeting the exfolition nd intergrnulr corrosion performnce specified in EN 9 using test methods detiled in ASTM G nd ASTM G7. 8
73 Tble 7 Alloy EN AW-9 [Al MgMn,8(B)] Hrdness R p, over up to mx. mx. A O,,,, H,,,, H,, 7 8,, 7 H,,,, 7 H,,,, H8,,,, No dt vilble. Tble 8 Alloy EN AW-9A [Al MgMn,8(C)] A Hrdness O,, H,, H,, H,, H,, H8,, No dt vilble. R p, over up to mx. mx. A,,,,,,,,,,,, A 9
74 Tble 9 Alloy EN AW- [Al MgMn] Hrdness R p, over up to mx. mx. A A F,,,, O,, 7 8, t, t 8,, 7 8, t, t 8,, 7 8,, 8,, 7 8 7, t 8,, 7 8 8, t 8,, H,, 7 8, t, t 8,, 7 8, t, t 8,, 7 8,, 8,, 7 8 7, t 8,, 7 8 8, t 8,, H,, 8,, 9 9,, 9 H,, 7,, 7,, 7,, 7,, 7 7,, 7 H,, 7 8,, 7 8,, 7 8,, 7 8,, 7 8,, 7 8 7
75 Hrdness R p, over up to mx. mx. A A H,,, t, t 7,,, t, 7,, 7,, 7,, 8, t 7,,, 7,, 9 7 H,,, t, t 7,,, t, 7,, 7,, 7,, 8, t 7,,, 7,, 9 7 H,, 7, t,,, 7, t,,, 7,, t,, 7 7,,, 7 8,,, 7 7 H,, 7, t,,, 7, t,,, 7,, t,, 7 7,,, 7 8,,, 7 7 H,, 87,, 87,, 87,, 87 H,, 87,, 87,, 87,, 87 H8,, 9,, 9,, 9 H8,, 9,, 9,, 9 For informtion only. 7
76 Tble Alloy EN AW- [Al MgMn] Hrdness R p, over up to mx. mx. A A O,,, t,, 8,, 8 7,, 7 7,, 7,,, t H,, 8,, 8 7,, 7 7,, 7 H b,, t,, 8,, 8,, 8 7 8,, H b,, t,,,, 8 8,, For informtion only. b Mteril supplied in the H or H temper shll be cpble of meeting the exfolition nd intergrnulr corrosion performnce specified in EN 9 using test methods detiled in ASTM G nd ASTM G7. 7
77 Tble Alloy EN AW-7 [Al 99,8Mg ] Hrdness R p, b over up to mx. mx. A H,, H b,, 7 H,, 7 7 H,, H,, H8,, 7 No dt vilble. This mteril is subjected to some recrystlliztion nd ttendnt loss of brightness. A Tble Alloy EN AW-7 [Al Mg] Hrdness R p, over up to mx. mx. A A F,,,, O,,, t,,, t, t,,,,,, 8,,,, 8,,, 7 H,,, t,,, t, t,,,,,, 8,,,, 8,,, 7 7
78 Hrdness R p, over up to mx. mx. A A H,,,, 8,,,, H,, 7 7,, 7 7,, 7 7,, 7 7 7,, 7 7 9,, H,, 7,, 7,, 7,, 7,, 7,, 7 H,,,,,,,, H8,, 88,, 88,, 88 H,, 7 7, t, t,, 7 8, t,,, 7,, t,, 7, t,, 7, t,, 7 9 7
79 Hrdness R p, over up to mx. mx. A A H,, 7 7, t, t,, 7 8, t,,, 7,, t,, 7, t,, 7, t,, 7 9 H,,, t, 7,,, t, t 7,, 7, t, 7,, 8, t 7,,, 7,, 8 7 H,,, t, 7,,, t, t 7,, 7, t, 7,, 8, t 7,,, 7,, 8 7 H,,, t 78,,, 78,,, 78,,, t 78 H,,, t 78,,, 78,,, 78,,, t 78 H8,, 87,, 87,, 87 H8,, 87,, 87,, 87 For informtion only. 7
80 Tble Alloy EN AW- [Al Si,Mg,] Hrdness R p, over up to mx. mx. A A T,, 7, t, t T,, For informtion only. Tble Alloy EN AW- [Al Mg,SiMnCu] Hrdnes s R p, b over up to mx. mx. A A O,,,, 8 H,,,, 7 7, t, H,,8,,8,,, t, t, H,,,,,,,,, H,,,,,, 8 8 8,,, NOTE This lloy cn be ordered with protection clds in EN AW-77. b For informtion only. No dt vilble. 7
81 Tble Alloy EN AW- [Al SiMgCuMn] Hrdness R p, over up to mx. mx. A A O,, 8,, t,, 8,,,, 8 8, t,, 8 7, t T,,, b, t b 78,,, b, b 78,, 8, b 78,, 8, b 78 T,, 7 8, b,, 7, b,, 7, b,, 7, t b T78,,, b,, 8, b,, 8, b,, 8, t b b For informtion only. Apprecibly smller cold bend rdii cn be chieved ieditely fter quenching. 77
82 Tble Alloy EN AW- [Al MgSiCu] Hrdness R p, over up to mx. mx. A O,, 8 A,, t,, 8,,,, 8 9,,, 8,,, T,,, t b, b 8,,, b, t b 8,,, b 8,, 8, b 8,, 8,, 8 T,,, t b, b 8,,, b, t b 8,,, b 8,, 8, b 8,, 8,, 8 T,, 9, b 7,, 9, t b 7,, 9, b 7,, 9 8, b 7,, 9 7,,
83 Hrdness R p, over up to mx. mx. A A T,,, t b 88,, 7, t b 88,,, b 88,, 9, b 88,, 8 88,, 88,, 88,, 7 8,, 8,,,, T,,, t b 88,, 7, t b 88,,, b 88,, 9, b 88,, 8 88,, 88,, 88,, 7 8,, 8,,,, 79
84 Hrdness R p, over up to mx. mx. A T,, A, t b 88,, 7, t b 88,,, b 88,, 9, b 88,, 8 88,, 88,, 88,, 7 8,, 8,,,, b For informtion only. Apprecibly smller cold bend rdii cn be chieved ieditely fter solution het tretment. Tble 7 Alloy EN AW-8 [Al SiMgMn] Hrdness R p, over up to mx. mx. A O,, 8 A,, t,, 8,,,, 8 8, t,, 8 7, t,, 8
85 Hrdness R p, over up to mx. mx. A T,, A, b, t b 8,,, b, b 8,,, b 8,,, b 8,, 8,, 8 T,,, b, t b 8,,, b, b 8,,, b 8,,, b 8,, 8,, 8 T,, 9, t b 7,, 9, b 7,, 9, b 7,, 9, b 7,, 9 7,, 9 7 T,,, t b 9,, 7, t b 9,,, t b 9,, 9, b 9,, ,, ,, 7 8, 7, 7 8
86 Hrdness R p, over up to mx. mx. A A 7,, 8
87 Hrdness R p, over up to mx. mx. A A T,,, t b 9,, 7, t b 9,,, t b 9,, 9, b 9,, ,, ,, 7 8, 7, 7 8 7,, T,,, t b 9,, 7, t b 9,,, t b 9,, 9, b 9,, ,, ,, 7 8, 7, 7 8 7,, T,,, b 8,,, t b 8,,, b 8,,, b 8,, 7 8,, 7 8 8
88 Hrdness R p, over up to mx. mx. A A,, 7 9 8, 7,
89 Hrdness R p, over up to mx. mx. A T,, A, b 8,,, t b 8,,, b 8,,, b 8,, 7 8,, 7 8,, 7 9 8, 7, b For informtion only. Apprecibly smller cold bend rdii cn be chieved ieditely fter quenching. 8
90 Tble 8 Alloy EN AW-7 [Al ZnMgCu] Hrdness R p, over up to mx. mx. A A T,, 7,,, 7,, 8, 7, 8 7, 7, 8 7,,,,,, 7,, 7 7 T,, 7,,, 7,, 8, 7, 8 7, 7, 8 7,,,,,, 7,, 7 7 T,, 7,,, 7,, 8, 7, 8 7, 7, 8 8
91 Hrdness R p, over up to mx. mx. A A 7,,,,,, 7,,
92 Hrdness R p, over up to mx. mx. A A T,, 7,,, 7,, 8, 7, 8 7, 7, 8 7,,,,,, 7,, 7 7 T7 b,,,,,,,, 7, 7,,, 7, 9 7,, 9 T7 b,,,,,,,, 7, 7,,, 7, 9 7,, 9 T7 c,, 9, 88
93 Hrdness R p, over up to mx. mx. A A,, 9,, 9,,, 7, 7 7,, 9 89
94 Hrdness R p, over up to mx. mx. A A T7 c,, 9,,, 9,, 9,,, 7, 7 7,, 9 T7 d,, 7 7,,, 7 7, 7, 7 7 7,, 7 7, 7, 7,, T7 d,, 7 7,,, 7 7, 7, 7 7 7,, 7 7, 7, 7,, Whenever new ppliction of this lloy is contemplted, nd if this ppliction involves specil properties such s corrosion resistnce, toughness, ftigue, it is strongly recoended tht the user consult the producer in order to mke precise nd pproprite selection of the mteril. 9
95 Hrdness R p, over up to mx. mx. A A For informtion only. b For lot cceptnce purposes, ll mteril in T7 nd T7 tempers shll comply with the following criteri when tested on the previously selected tensile test specimen: Electricl conductivity γ MS/m Mechnicl properties Lot cceptnce sttus γ, s specified cceptble γ <, s specified not cceptble The plte my be re-het treted or given dditionl precipittion het tretment to develop tensile properties / conductivity s specified. c For lot cceptnce purposes, ll mteril in T7 nd T7 tempers shll comply with the following criteri when tested on the previously selected tensile test specimen: Electricl conductivity γ MS/m Mechnicl properties Lot cceptnce sttus γ, s specified cceptble γ <, s specified not cceptble The plte my be re-het treted or given dditionl precipittion het tretment to develop tensile properties / conductivity s specified. d For lot cceptnce purposes, ll mteril in T7 nd T7 tempers shll comply with the following criteri when tested on the previously selected tensile test specimen: Electricl conductivity γ MS/m Mechnicl properties Lot cceptnce sttus γ,8 s specified cceptble γ <,8 s specified not cceptble The plte my be re-het treted or given dditionl precipittion het tretment to develop tensile properties / conductivity s specified.
96 Tble 9 Alloy EN AW-79 [Al ZnMg] Hrdness b R p, over up to mx. mx. A A T,, 8,, 8,, 8,, 8,, 7 Whenever new ppliction of this lloy is contemplted, nd if this ppliction involves specil properties such s corrosion resistnce, toughness, ftigue, it is strongly recoended tht the user consult the producer in order to mke precise nd pproprite selection of the mteril. b Dt not vilble. For informtion only. 9
97 Tble Alloy EN AW-7 [Al Zn,Mg] Hrdness R p, over up to mx. mx. A A O,,,,,,,, T c,,, b 9,,, t b 9,,, t b 9,,, b 9 T c,,, b 9,,, t b 9,,, t b 9,,, b 9 T,, 7, t b,, 8, b,,, t b,, 8, b,, 9,, 7 8,, 7 98, 7, 98 7,, 9
98 Hrdness R p, over up to mx. mx. A A T,, 7, t b,, 8, b,,, t b,, 8, b,, 9,, 7 8,, 7 98, 7, 98 7,, T,, 7, t b,, 8, b,,, t b,, 8, b,, 9,, 7 8,, 7 98, 7, 98 7,, Whenever new ppliction of this lloy is contemplted, nd if this ppliction involves specil properties such s corrosion resistnce, toughness, ftigue, it is strongly recoended tht the user consult the producer in order to mke precise nd pproprite selection of the mteril. b For informtion only. Apprecibly smller cold bend rdii cn be chieved ieditely fter quenching. c Use of this lloy in the T or T temper for finished products shll be voided. The specified mechnicl properties re chieved fter months of nturl geing t mbient temperture. This nturl geing my be pproximted by mintining the quenched test piece for bout h t temperture between C nd C. 9
99 Tble Alloy EN AW-7 [Al Zn,Mg,] Hrdness b R p, over up to mx. mx. A A T,, 7,, 8 Whenever new ppliction of this lloy is contemplted, nd if this ppliction involves specil properties such s corrosion resistnce, toughness, ftigue, it is strongly recoended tht the user consult the producer in order to mke precise nd pproprite selection of the mteril. b Dt not vilble. For informtion only. Tble Alloy EN AW-7 [Al ZnMgCu] Hrdnes s R p, b over up to mx. mx. A A T,, 7 8,, 7 8,, 7 7,, 7,, T,, 7 8,, 7 8,, 7 7,, 7,, Whenever new ppliction of this lloy is contemplted, nd if this ppliction involves specil properties such s corrosion resistnce, toughness, ftigue, it is strongly recoended tht the user consult the producer in order to mke precise nd pproprite selection of the mteril. b No dt vilble. For informtion only. 9
100 Tble Alloy EN AW-77 [Al Zn,MgCu] R p, over up to mx. mx. A A Hrdness O,,8 7,, t,8, 7,,,, 7,,,, 7, t,, 7,, 7, 7 9 T,,8, t b 7,8,, t b,, 7 7, t b,, 7 8 8, b,, 8, b,, 7,, 8,,,, 9 7,,,,,, 9,,,,,, 9
101 R p, over up to mx. mx. A T,,8,8,,,,,,,,,,,,,,,,,,,,,,,,,,, A, t b, t b, t b 8, b, b Hrdness T,,8, t b 7,8,, t b ,, 7 7, t b,, 7 8 8, b,, 8, b,, 7,, 8,,,, 9 7,,,,,, 9,,,,,, 97
102 R p, over up to mx. mx. A A T,,,, Hrdness T7 c,, 7 9,, 8 9,, 7 T7 c,, 7 9,, 8 9,, 7 T7d,, 8 7 7,, 8 8 7,, 7 7,, 7,, 7,,,, 9,, T7d,, 8 7 7,, 8 8 7,, 7 7,, 7,, 7,,,, 9,, Whenever new ppliction of this lloy is contemplted, nd if this ppliction involves specil properties such s corrosion resistnce, toughness, ftigue, it is strongly recoended tht the user consult the producer in order to mke precise nd pproprite selection of the mteril. 98
103 R p, over up to mx. mx. A A Hrdness For informtion only. b Apprecibly smller cold bend rdii cn be chieved ieditely fter quenching. c For lot cceptnce purposes, ll mteril in T7 nd T7 tempers shll comply with the following criteri when tested on the previously selected tensile test specimen: Electricl conductivity γ MS/m Mechnicl properties Lot cceptnce sttus γ, s specified cceptble, γ <,s specified nd R p, does not exceed minimum by more thn 8 cceptble, γ <,s specified nd R p, exceeds minimum by more thn 8 cceptble if the EXCO test gives stisfctory results γ <, ny level not cceptble d For lot cceptnce purposes, ll mteril in T7 nd T7 tempers shll comply with the following criteri when tested on the previously selected tensile test specimen: Electricl conductivity γ MS/m Mechnicl properties Lot cceptnce sttus γ, s specified cceptble, γ <,s specified nd R p, does not exceed minimum by more thn 8 cceptble, γ <,s specified nd R p, exceeds minimum by more thn 8 cceptble if the electricl conductivity mesured within min of n dditionl solution tretment nd quench shows loss of t lest, MS/m from its initil vlue γ <, ny level not cceptble Tble Alloy EN AW-A [Al FeSi(A)] Hrdness b R p, over up to mx. mx. A Fb,, 8 A O,, 8 9,, 8,, 8,, 8,, 8 99
104 Hrdness b R p, over up to mx. mx. A A H,, 8 9,, 8,, 8,, 8,, 8 H,, 7,,,,,,,, H,, 7,, 8 7,, 8 7 H8,,,,,, H,,,,,, H,,,,,,,,,, 7 H,, 8,, 8,, 8 b No dt vilble. For informtion only.
105 Annex A (normtive) Rules for rounding In recording test results, the number representing the result of test to determine given property shll be expressed to the sme number of deciml plces s the corresponding number in this Europen Stndrd. The following rounding rules shll be used for determintion of complince with this Europen Stndrd: when the figure ieditely fter the lst figure to be retined is less thn five, the lst figure to be retined remins unchnged; when the figure ieditely fter the lst figure to be retined is greter thn five, or equl to five nd followed by t lest one figure other thn zero, the lst figure to be retined is incresed by one; when the figure ieditely fter the lst figure to be retined is equl to five nd followed by zeros only, the lst figure to be retined remins unchnged if even nd is incresed by one if odd.
106 Bibliogrphy [] Council Directive 89//EEC of December 988 on the pproximtion of lws, regultions nd dministrtive provisions of the Member Sttes relting to construction products [] EN 8-, Aluminium nd luminium lloys Sheet, strip nd plte Prt : Technicl conditions for inspection nd delivery [] EN, Aluminium nd luminium lloys - Wrought products - designtions [] EN 7-, Aluminium nd luminium lloys - Chemicl composition nd form of wrought products - Prt : Chemicl composition nd form of products [] EN ISO 89-, Metllic mterils - testing - Prt : Method of test t room temperture (ISO 89-)
107 This pge delibertely left blnk
108 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW British Stndrds Institution (BSI) BSI is the ntionl body responsible for prepring British Stndrds nd other stndrds-relted publictions, informtion nd services. BSI is incorported by Royl Chrter. British Stndrds nd other stndrdiztion products re published by BSI Stndrds Limited. About us We bring together business, industry, government, consumers, innovtors nd others to shpe their combined experience nd expertise into stndrds -bsed solutions. The knowledge embodied in our stndrds hs been crefully ssembled in dependble formt nd refined through our open consulttion process. Orgniztions of ll sizes nd cross ll sectors choose stndrds to help them chieve their gols. Informtion on stndrds We cn provide you with the knowledge tht your orgniztion needs to succeed. Find out more bout British Stndrds by visiting our website t bsigroup.com/stndrds or contcting our Customer Services tem or Knowledge Centre. Buying stndrds You cn buy nd downlod PDF versions of BSI publictions, including British nd dopted Europen nd interntionl stndrds, through our website t bsigroup.com/shop, where hrd copies cn lso be purchsed. If you need interntionl nd foreign stndrds from other Stndrds Development Orgniztions, hrd copies cn be ordered from our Customer Services tem. Copyright in BSI publictions All the content in BSI publictions, including British Stndrds, is the property of nd copyrighted by BSI or some person or entity tht owns copyright in the informtion used (such s the interntionl stndrdiztion bodies) nd hs formlly licensed such informtion to BSI for coercil publiction nd use. Sve for the provisions below, you my not trnsfer, shre or disseminte ny portion of the stndrd to ny other person. You my not dpt, distribute, coercilly exploit, or publicly disply the stndrd or ny portion thereof in ny mnner whtsoever without BSI s prior written consent. Storing nd using stndrds Stndrds purchsed in soft copy formt: A British Stndrd purchsed in soft copy formt is licensed to sole nmed user for personl or internl compny use only. The stndrd my be stored on more thn device provided tht it is ccessible by the sole nmed user only nd tht only copy is ccessed t ny one time. A single pper copy my be printed for personl or internl compny use only. Stndrds purchsed in hrd copy formt: A British Stndrd purchsed in hrd copy formt is for personl or internl compny use only. It my not be further reproduced in ny formt to crete n dditionl copy. This includes scnning of the document. If you need more thn copy of the document, or if you wish to shre the document on n internl network, you cn sve money by choosing subscription product (see Subscriptions ). Reproducing extrcts For permission to reproduce content from BSI publictions contct the BSI Copyright & Licensing tem. Subscriptions Our rnge of subscription services re designed to mke using stndrds esier for you. For further informtion on our subscription products go to bsigroup.com/subscriptions. With British Stndrds Online (BSOL) you ll hve instnt ccess to over, British nd dopted Europen nd interntionl stndrds from your desktop. It s vilble /7 nd is refreshed dily so you ll lwys be up to dte. You cn keep in touch with stndrds developments nd receive substntil discounts on the purchse price of stndrds, both in single copy nd subscription formt, by becoming BSI Subscribing Member. PLUS is n updting service exclusive to BSI Subscribing Members. You will utomticlly receive the ltest hrd copy of your stndrds when they re revised or replced. To find out more bout becoming BSI Subscribing Member nd the benefits of membership, plese visit bsigroup.com/shop. With Multi-User Network Licence (MUNL) you re ble to host stndrds publictions on your intrnet. Licences cn cover s few or s mny users s you wish. With updtes supplied s soon s they re vilble, you cn be sure your documenttion is current. For further informtion, emil subscriptions@bsigroup.com. Revisions Our British Stndrds nd other publictions re updted by mendment or revision. We continully improve the qulity of our products nd services to benefit your business. If you find n inccurcy or mbiguity within British Stndrd or other BSI publiction plese inform the Knowledge Centre. Useful Contcts Customer Services Tel: + 8 Emil (orders): orders@bsigroup.com Emil (enquiries): cservices@bsigroup.com Subscriptions Tel: + 8 Emil: subscriptions@bsigroup.com Knowledge Centre Tel: Emil: knowledgecentre@bsigroup.com Copyright & Licensing Tel: Emil: copyright@bsigroup.com BSI Group Hedqurters 89 Chiswick High Rod London W AL UK
BS EN 485-2:2007 Ntionl foreword This British Stndrd ws published by BSI. It is the UK implementtion of EN 485-2:2007. It supersedes B
www.mintiluminu BRITISH STANDARD BS EN 485-2:2007 Aluminium nd luminium lloys Sheet, strip nd plte Prt 2: Mechnicl properties The Europen Stndrd EN 485-2:2007 hs the sttus of British Stndrd ICS 77.120.10
More informationEurocode 2 Design of concrete structures
BRITISH STANDARD BS EN 1992-3:2006 Eurocode 2 Design of concrete structures Part 3: Liquid retaining and containment structures The European Standard EN 1992-3:2006 has the status of a British Standard
More informationPart 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B BS EN :2007 +A1:2009
BRITISH STANDARD BS EN 13476-3:2007 +A1:2009 Plstics piping systems for non-pressure underground dringe nd sewerge Structured-wll piping systems of unplsticized poly(vinyl chloride) (PVC-U), polypropylene
More informationWaste fittings for sanitary appliances
BRITISH STANDARD BS EN 274-2:2002 Incorporating Corrigendum No. 1 Waste fittings for sanitary appliances Part 2: Test methods The European Standard EN 274-2:2002 has the status of a British Standard ICS
More informationSOUTH AFRICAN NATIONAL STANDARD
Copying nd network storge prohibited. ISBN 978-0-626-31934-2 SANS 62841-3-6:2016 Edition 1 nd IEC corr. 1 :2014 Edition 1 nd corr. 1 SOUTH AFRICAN NATIONAL STANDARD Electric motor-operted hnd-held tools,
More information1. Energy. Reference approach Sectoral approach Difference Explanation for difference as reported in table 1.A(c) of the CRF
1. Energy Energy - Totl CO 2 emissions from the reference pproch nd the sectorl pproch (2000) CO 2 emissions from totl fuel combustion Reference pproch Sectorl pproch Difference Explntion for difference
More informationMobile waste and. BSI Standards Publication
BSI Standards Publication Mobile waste and recycling containers Part 4: Containers with 4 wheels with a capacity up to 1 7 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices
More informationStructural steel equal and unequal leg
BRITISH STANDARD BS EN 10056-1:1999 The European Standard has the status of a British Standard ICS 77.140.70 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Structural steel equal
More information631 ALLOWANES AND TOLERANCES
631 ALLOWANES AND TOLERANCES ANSI Fits. Tbles 3 through 9 inclusive show series of stndrd types nd clsses of fits on unilterl hole bsis, such tht the fit produced by mting prts in ny one clss will produce
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-5:2007 Incorporating corrigendum May 2009 Eurocode 3 Design of steel structures Part 5: Piling ICS 91.010.30; 91.080.10 National foreword This British Standard is the UK implementation
More informationFINGER STRIPS. and other EMI shielding products. Characteristics
BERYLLIUM COPPER CONTCT FINGER STRIPS nd other EMI shielding products ppliction Due to their outstnding mteril nd electricl chrcteristics, eryllium copper fingers of different shpes nd dimensions re used
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-3-2:2006 Eurocode 3 Design of steel structures Part 3-2: Towers, masts and chimneys Chimneys ICS 91.010.30; 91.060.40; 91.080.10 National foreword This British Standard is the
More informationChapter URL:
This PDF is selection from n out-of-print volume from the Ntionl Bureu of Economic Reserch Volume Title: Price nd Quntity Trends in the Foreign Trde of the United Sttes Volume Author/Editor: Robert E.
More informationContinuously hot-rolled strip and plate/sheet cut from wide strip of nonalloy and alloy steels - Tolerances on dimensions and shape
Irish Standard Continuously hot-rolled strip and plate/sheet cut from wide strip of nonalloy and alloy steels - Tolerances on dimensions and shape NSAI 2010 No copying without NSAI permission except as
More informationDEUTSCHE NORM June Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO : 2001)
DEUTSCHE NORM June 2002 Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO 1043-1 : 2001) English version of DIN EN ISO 1043-1 { EN ISO 1043-1 ICS 01.040.83;
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29507-3 EN 413-1:2011 SOUTH AFRICAN NATIONAL STANDARD Masonry cement Part 1: Composition, specifications and conformity criteria This national standard is the identical implementation of
More informationProduct range MEGAlife
Product rnge Fx enquiries: +49 89 76909-11 sles@iwis.com MEGAlife MEGAlife mintennce free roller nd conveyor chins cn be pplied in ll res where post instlltion lubriction is not t ll or only prtly possible.
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-1-5:2006 Incorporating corrigendum April 2009 Eurocode 3 Design of steel structures Part 1-5: Plated structural elements ICS 91.010.30; 91.080.10 National foreword This British
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-2:2006 Incorporating corrigendum July 2009 Eurocode 3 Design of steel structures Part 2: Steel bridges ICS 91.010.30; 91.080.10; 93.040 National foreword This British Standard
More information330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT TYPICAL ACCESS TO LEVELING 15
L CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL 0mm ( 6" ) CEN I, CEN III GS, or CEN IV GS SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
More informationDEUTSCHE NORM May 2004 DIN EN ISO 4029 { Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029
DEUTSCHE NORM May 2004 DIN EN ISO 4029 { ICS 21.060.10 Supersedes DIN 916, December 1980 edition. Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029 Gewindestifte
More informationEurocode 1 Actions on structures
BRITISH STANDARD Eurocode 1 Actions on structures BS EN 1991-1-3:2003 Incorporating corrigenda December 2004 and March 2009 Part 1-3: General actions Snow loads ICS 91.010.30 National foreword This British
More informationDEUTSCHE NORM February 2005 DIN EN ISO 1514 { Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514
DEUTSCHE NORM February 2005 DIN EN ISO 1514 { ICS 87.100 Supersedes September 1997 edition. Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514 Beschichtungsstoffe
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-3-1:2006 Incorporating corrigendum July 2009 Eurocode 3 Design of steel structures Part 3-1: Towers, masts and chimneys Towers and masts ICS 91.010.30; 91.080.10 National foreword
More informationRESILIENT AND LAMINATE FLOOR COVERINGS - CASTOR CHAIR TEST IRISH STANDARD I.S. EN 425:2002. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN 425:2002 ICS 97.150 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 RESILIENT AND LAMINATE FLOOR COVERINGS - CASTOR CHAIR TEST NSAI
More information(mω) 1. Temperature ( C) Voltage (V) ULRG1 /
Resistors Metl Strip Current Sense Resistors Surfce Mount Metl Element Current Metl Element Sense Resistor UR Series UR Current Series Sense Resistor Mke Possible Resistnce R0005 (m ) to R015 (15m ) Metl
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-1-6:2007 Incorporating corrigendum April 2009 Eurocode 3 Design of steel structures Part 1-6: Strength and Stability of Shell Structures ICS 91.010.30; 91.080.10 National foreword
More informationINDUSTRIAL VALVES - ISOLATING VALVES FOR LNG - SPECIFICATION FOR SUITABILITY AND APPROPRIATE VERIFICATION TESTS IRISH STANDARD I.S.
IRISH STANDARD I.S. EN 12567:2000 ICS 23.060.01 National Standards Authority of Ireland Dublin 9 Ireland INDUSTRIAL VALVES - ISOLATING VALVES Tel: (01) 807 3800 Tel: (01) 807 3838 FOR LNG - SPECIFICATION
More informationGas turbines Procurement
BRITISH STANDARD Gas turbines Procurement BS EN ISO 3977-5:2003 Incorporating Amendment No. 1 (renumbers BS ISO 3977-5:2001 as BS EN ISO 3977-5:2003) Part 5: Applications for petroleum and natural gas
More informationEurocode 8: Design of structures for earthquake resistance
BRITISH STANDARD BS EN 1998-4:2006 Eurocode 8: Design of structures for earthquake resistance Part 4: Silos, tanks and pipelines The European Standard EN 1998-4:2006 has the status of a British Standard
More informationDEUTSCHE NORM January Fasteners Electroplated coatings (ISO 4042 : 1999) English version of DIN EN ISO 4042
DEUTSCHE NORM January 2001 Fasteners Electroplated coatings (ISO 4042 : 1999) English version of DIN EN ISO 4042 { EN ISO 4042 ICS 21.060.01; 25.220.40 Verbindungselemente Galvanische Überzüge (ISO 4042
More informationDEUTSCHE NORM October Structural steel equal and unequal leg angles Part 1: Dimensions English version of DIN EN
DEUTSCHE NORM October 1998 Structural steel equal and unequal leg angles Part 1: Dimensions English version of DIN EN 10056-1 { EN 10056-1 ICS 77.140.70 Descriptors: Structural steel, angles, dimensions.
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28152-6 EN 197-1:2011 SOUTH AFRICAN NATIONAL STANDARD Cement Part 1: Composition, specifications and conformity criteria for common cements This national standard is the identical implementation
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32581-7 SOUTH AFRICAN NATIONAL STANDARD Gravity drainage systems inside buildings Part 3: Roof drainage, layout and calculation This national standard is the identical implementation of,
More informationShell boilers. Part 8: Requirements for safeguards against excessive pressure. BS EN :2001 Incorporating Corrigendum No. 1 BRITISH STANDARD
BRITISH STANDARD Shell boilers Part 8: Requirements for safeguards against excessive pressure The European Standard EN 12953-8:2001 has the status of a British Standard ICS 27.060.30; 27.100 BS EN 12953-8:2001
More information330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY
L08 CLL -800--600 R CS 0 FULL FUNCTION TERMINL " OR " DISPLY - THROUGH THE WLL 0mm (") 40mm ( 6") CEN I, CEN III GS OR CEN IV GS SFES SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS
More information203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT NOTE: 203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY
L0 CLL -800--600 R CS 0 FULL FUNCTION VESTIBULE TERMINL " OR " DISPLY-THROUGH 0mm ( MXIMUM WLL 40mm ( 6") CEN I, CEN III GS or CEN IV GS SFES SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
More informationDIEBOLD 5550 CASH DISPENSER THROUGH 330mm (13") MAXIMUM WALL PLAN VIEW FRONT ELEVATION SIDE ELEVATION CONSUMER ACCESS DIMENSIONS
L0 CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL mm ( " ) UL CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
More informationInstallation and Operational Instructions for ROBA -slip hubs Sizes 0 12 (B.1.0.GB)
Plese red these Opertionl Instructions crefully nd follow them ccordingly! Ignoring these Instructions my led to mlfunctions or to clutch filure, resulting in dmge to other prts. These Instlltion nd Opertionl
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30207-8 SOUTH AFRICAN NATIONAL STANDARD Chemicals used for treatment of water intended for human consumption Chlorine This national standard is the identical implementation of and is adopted
More informationTECHNICAL INSIGHT INTERNAL CLEARANCE - TYPES AND NORMS
TECHNICAL INSIGHT PRODUCT AND APPLICATION ENGINEERING INFORMATION A PUBLICATION OF NSK AMERICAS INTERNAL CLEARANCE - TYPES AND NORMS Internl clernce is the distnce which the two rings of non-instlled bering
More informationBrazed heat exchanger XB
Description The XB is rnge of copper rzed plte het exchngers for use in District Heting (DH) nd District Cooling (DC) pplictions, e.g. domestic hot wter production, district heting susttion to seprte the
More informationCS 7750 FULL FUNCTION TERMINAL 15" OR 19" DISPLAY - THROUGH THE WALL 330mm (13")
L08 CLL -800--600 " OR " DISPLY - THROUGH THE WLL 0mm (") 40mm ( 6") CEN I CONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
More informationDEUTSCHE NORM March Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016
DEUTSCHE NORM March 2001 Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016 { EN ISO 4016 ICS 21.060.10 Sechskantschrauben mit Schaft Produktklasse C (ISO 4016 : 1999)
More information2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, electriclly operted 1 Description 2 echnicl dt
More informationWATER-TUBE BOILERS AND AUXILIARY
IRISH STANDARD I.S. EN 12952-12:2003 ICS 13.060.25 27.040 WATER-TUBE BOILERS AND AUXILIARY National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 INSTALLATIONS -
More informationAerospace series O-rings, in fluorosilicone rubber (FVMQ) Technical specification
SVENSK STANDARD SS-EN 3747 Fastställd 2003-01-31 Utgåva 1 Aerospace series O-rings, in fluorosilicone rubber (FVMQ) Technical specification ICS 49.025.40 Språk: engelska Publicerad: mars 2003 Copyright
More informationDIEBOLD 3750 CASH RECYCLER TERMINAL. 13mm ( 2") UL SAFE - 15" OR 19" DISPLAY THROUGH THE WALL 330mm (13") PLAN VIEW FRONT ELEVATION SECTION
L8 CLL -800--600 R DIEBOLD 0 CSH RECYCLER TERMINL mm ( ") UL SFE - " OR " DISPLY THROUGH THE WLL 0mm (") 64 SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
More informationSeries 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
More informationProvläsningsexemplar / Preview
Provläsningsexemplar / Preview EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 14975:2006+A1 July 2010 ICS 91.060.30 Supersedes EN 14975:2006 English Version Loft ladders - Requirements, marking
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26065-1 Edition 1 EN 12281:2002 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Printing and business paper Requirements for copy paper for dry toner imaging processes This national standard is
More informationWATERTIGHT AIRTIGHT SPECIAL ACCESS DOORS & HATCHES, PART 1 GENERAL
SECTION 08316 WTERTIGHT IRTIGHT SPECIL CCESS DOORS & HTCHES, PRT 1 GENERL HIGHLIGHTED RES TO BE INSERTED BY SPECIFYING ENGINEER. 1.1 WORK OF THIS SECTION. THE WORK OF THIS SECTION INCLUDES PROVIDING LL
More informationILNAS-EN 15663:2017. Railway applications - Vehicle reference masses. Bahnanwendungen - Fahrzeugreferenzmassen
Railway applications - Vehicle reference masses Bahnanwendungen - Fahrzeugreferenzmassen Applications ferroviaires - Masses de référence des véhicules 07/2017 National Foreword This European Standard EN
More informationMETALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2003) IRISH STANDARD I.S. EN ISO 18265:2003. Price Code
IRISH STANDARD I.S. EN ISO 18265:2003 ICS 77.040.01 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO
More informationDEUTSCHE NORM February 2003
DEUTSCHE NORM February 2003 Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylenediene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)- styrene (ACS) moulding and extrusion
More informationDEUTSCHE NORM October Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887
DEUTSCHE NORM October 2003 Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887 { EN ISO 3887 ICS 77.040.99 Stahl Bestimmung der Entkohlungstiefe (ISO 3887
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31521-4 EN 300:2006 SOUTH AFRICAN NATIONAL STANDARD Oriented Strand Boards (OSB) Definitions, classification and specifications This national standard is the identical implementation of
More informationCOLD ROLLED STEEL SECTIONS -
STANDARD I.S. EN 10162:2003 ICS 77.140.70 National Standards Authority of Ireland Dublin 9 Ireland COLD ROLLED STEEL SECTIONS - Tel: (01) 807 3800 Fax: (01) 807 3838 TECHNICAL DELIVERY CONDITIONS - DIMENSIONAL
More informationJUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks
Pge /8 JUMO MIDAS C8 SW OEM sewter pressure trnsmitter Applictions wter tretment reverse osmosis, e.g. sewter deslintion plnts purifiction plnts orgnic cids, e.g. cetic cid solutions contining chloride,
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28107-6 EN 1008:2002 SOUTH AFRICAN NATIONAL STANDARD Mixing water for concrete Specification for sampling, testing and assessing the suitability of water, including water recovered from
More informationJUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
Mckenrodtstrße 4 609 Fuld, Allemgne 605 Fuld, Allemgne Tél. : +49 66 600-0 Fx. : +49 66 600-607 B.P. 4500 57075 Metz Cedex, Frnce Tél. : + 87 7 5 00 Fx. : + 87 7 89 00 Industriestrße 8 4700 Eupen, Belgique
More informationDEUTSCHE NORM July 2004 DIN EN ISO 9038 { Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038
DEUTSCHE NORM July 2004 DIN EN ISO 9038 { ICS 13.220.40; 87.040 Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038 Prüfung der Weiterbrennbarkeit von Flüssigkeiten
More informationPush-in RTD temperature probe for heat meters with connecting cable for thermowells (type PS/PL)
elivery ddress: Mckenrodtstrße 14 36039 Fuld, Germny Postl ddress: 36035 Fuld, Germny Fx: +49 661 6003-607 Emil: mil@jumo.net Temple Bnk, Riverwy Hrlow, Essex, CM20 2Y, UK Fx: +44 1279 62 50 29 Emil: sles@jumo.co.uk
More informationAll the work described in sections A, B, C, D, and E must be carried out in full before the wheel/tyre combination may be used.
mb cdef Instlltion Instructions Conversion to 16-inch tyres nd 7 1/2 J _ 16 H 2 ET 40 disk wheel 40.11 Model 124 Excluding vehicles with specil bodywork, sedns with long wheelbse nd 124.031/036/051/091/290/393.
More informationDIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CEN I, CEN III GAS, CEN IV GAS or CEN IV GAS EX SAFES
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY CEN I, CEN III GS, CEN IV GS or CEN IV GS EX SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL
More informationData Sheet T /4/5/6 EN
Dt heet T 8310-1/4/5/6 EN Pneumtic Actutors up to 750v2 cm² Type 3271 Type 3277 for integrl positioner ttchment Appliction Liner ctutors prticulrly suitble for ttchment to eries 240, 250, 280 nd 290 Vlves
More informationSEE PAGES 3 AND 4 OF 7 FOR 3700 CASH RECYCLER THROUGH THE WALL WITH VESTIBULE TRIM KIT REFERENCE FRONT EDGE OF BEZEL FOR DEPTH DIMENSIONS
R DIEBOLD 00 LOBBY CSH RECYCLER- RER LOD L2 CLL -0--600 64 SFE (2 6 ") 40mm ( 6") CEN I SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH
More informationDEUTSCHE NORM DIN EN 10080
DEUTSCHE NORM DIN EN 10080 August 2005 { ICS 77.140.15; 77.140.60; 77.140.65 Supersedes DIN V ENV 10080, August 1995 edition, parts of DIN 488-1, September 1984 edition, DIN 488-2, DIN 488-4 and DIN 488-6,
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14832:2005 Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids Petroleum and related products - Determination
More informationCS 7780 FULL FUNCTION DRIVE-UP TERMINAL
L CLL -800--600 CS 80 FULL FUNCTION DRIVE-UP TERMINL mm ( ") UL - "or " DISPLY THROUGH 0mm (8") MXIMUM WLL CONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
More information4/2- and 4/3-way shut-off valve
Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure
More informationCooling Efficiency 2017/2018 Cooling Equipment Rebate Application
Business Appliction Cooling Efficiency 2017/2018 Cooling Equipment Rebte Appliction For use with invoices dted on or fter Jnury 1, 2017 OID: (Internl use only) Business customer informtion Compny nme Dte
More informationSTANDARD AND FULL HEIGHT - REAR LOAD - WITH 40mm (1 16") CEN I, CEN III GAS or CEN IV GAS SAFES
L STNDRD ND FULL HEIGHT - RER LOD - WITH 0mm ( 6") "LL DIMENSIONS ND DESIGN CRITERI PGE OF 8 FRONT - STNDRD HEIGHT SEE PGES and FOR CS 00 STNDRD HEIGHT DETILS FRONT - FULL HEIGHT SEE PGES and FOR CS 00
More information* * * DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CONSUMER ACCESS DIMENSIONS PLAN VIEW 19" DISPLAY FRONT ELEVATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY WITH mm ( ") UL SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE
More informationFree Machining Austenitic Ferritic + Martensitic Pure Titanium Titanium Alloys Stainless Steels Stainless Steels <950N/mm 2
& - Tps For Stinless Steels These top qulity Tps re mde in Switzerlnd, by DC-Swiss, one of the leding Tp Mnufcturers in Europe. All the Tps re mde of - (Powder Metl). This mteril hs proven to be the best
More informationOPTIONAL 178mm (7") SPACER AVAILABLE FOR WALL THICKNESSES UP TO 152mm (6") 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT
L88 CLL -0--600 R DIEBOLD 0 CSH RECYCLER WITH COIN 40mm ( 6") CEN I, CEN III GS or CEN IV GS SFES THROUGH 0mm (") MXIMUM WLL 64 SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND
More informationAnnex II Emission reduction commitments
Annex II Emission redution ommitments 1. The emission redution ommitments listed in the tles elow relte to the provisions of rtile 3, prgrphs 1 nd 10, of the present Protool. 2. Tle 1 inludes the emission
More informationHot Air Thermostats. WTHc series. Special features. Brief description. Switching function. Approval/approval marks (see "Technical data")
Delivery ddress: Mckenrodtstrße 36039 Fuld, Germny Postl ddress: 36035 Fuld, Germny Phone: +9 66 6003-0 Fx: +9 66 6003-607 E-mil: mil@jumo.net Temple Bnk, Riverwy Hrlow, Essex CM0 DY, UK Phone: + 79 635533
More informationRPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007
Directionl Control Vlves Solenoid Operted with 8W Coil RPEA3-06 0/20 Size 06 (D 03) 350 br (5076 PSI) 80 L/min (2 GPM) Replces 2/2007 /3-, /2- wy directionl control vlves Enclosure type to IP65 Push button
More informationSOUTH AFRICAN NATIONAL STANDARD
ICS 83.080.20; 83.140.30 ISBN 0-626-14156-7 SANS 12107:2003 SOUTH AFRICAN NATIONAL STANDARD Plastics piping systems Injection-moulded thermoplastics fittings, valves and ancillary equipment Determination
More informationSteel wire ropes - Terminations for steel wire ropes Safety - Metal and resin socketing
Draft SI part 34 34 October 2011 2011 ICS CODE ###### Steel wire ropes Terminations for steel wire ropes Safety Metal and resin socketing The Standards Institution of Israel 24/10/11 #### wwwsiiorgil 036412762
More informationRoller and ball bars for easy and safe die change
Roller nd bll brs for esy nd sfe die chnge T-slot tolernces cc. to DIN 6 b c h n min. mx. mx. 8 H8 + +,6 H8 37 +3 +,6 8 H8 +4 0 + 48 56,6 H8 56 +4 5 +3 6 7,5 Dimensions in mm h min. = smllest dimension
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13652:2002 Soil improvers and growing media - Extraction of water soluble nutrients and elements Soil improvers and growing media - Extraction of water soluble nutrients and elements
More informationJUMO MIDAS S05 OEM pressure transmitter - universal
Delivery ddress: Mckenrodtstrße 4 609 Fuld, Germny Postl ddress: 605 Fuld, Germny Phone: +49 66 600-0 Fx: +49 66 600-607 Hrlow, Essex CM0 DY, UK Phone: +44 79 655 Fx: +44 79 656 Cnstot, NY 0, USA Phone:
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12592:2007 Bitumen and bituminous binders - Determination of solubility Bitumen and bituminous binders - Determination of solubility EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12606-1:2007 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation Bitumen and bituminous binders - Determination of the paraffin
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12122:2005 Chemicals used for treatment of water intended for human consumption - Ammonium solution Chemicals used for treatment of water intended for human consumption - Ammonia
More informationKondenserade petroleumgaser Metod för provtagning (ISO 4257:2001) Liquefied petroleum gases Method of sampling (ISO 4257:2001)
SVENSK STANDARD SS-EN ISO 4257 Fastställd 2001-09-14 Utgåva 2 Kondenserade petroleumgaser Metod för provtagning (ISO 4257:2001) Liquefied petroleum gases Method of sampling (ISO 4257:2001) ICS 75.160.30
More informationThermocouple Thermometer omnigrad S- TC 88
Technicl informtion TI 279T/02/en 60022508 Thermocouple Thermometer omnigrd S- TC 88 Thermocouple ssembly with extension neck Replceble insert PCP (4...20 ma), HART or PROFIBUS-PA electronics The TC 88
More informationJärnvägar Spår Provningsmetoder för befästningssystem Del 5: Bestämning av elektriskt motstånd
SVENSK STANDARD SS-EN 13146-5 Fastställd 2002-11-29 Utgåva 1 Järnvägar Spår Provningsmetoder för befästningssystem Del 5: Bestämning av elektriskt motstånd Railway applications Track Test methods for fastening
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12173:2005 Chemicals used for treatment of water intended for human consumption - Sodium fluoride Chemicals used for treatment of water intended for human consumption - Sodium fluoride
More informationPlastics piping systems for the supply of gaseous fuels Polyethylene (PE) Part 4: Valves
BSI Standards Publication Plastics piping systems for the supply of gaseous fuels Polyethylene (PE) Part 4: Valves BRITISH STANDARD National foreword This British Standard is the UK implementation of EN
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 840-1:2004 Teisaldatavad heitmekonteinerid. Osa 1: Kaherattalised konteinerid mahuga kuni 400 l, tõstmiseks kammtõsteseadistega, mõõtmed ja konstrueerimine Mobile waste containers
More information2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 20 l/min (5.3 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, with EX-sfty sol. coil Vlve: With crtridge vlve,
More informationRPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006
Solenoid Operted Directionl Control Vlves RE3-06 10/2008 Size 06 p mx up to 320 br Q mx up to 80 L/min Replces 11/2006 4/3, 4/2 wy directionl control vlves Solenoids cn be turned round their xis to ny
More informationPneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273
Pneumtic Actutors 000, 400, 2800, nd 2 x 2800 cm² Type 27 nd Type 277 for integrl positioner ttchment nd-operted Actutor Type 27 Appliction Liner ctutor in prticulr for ttchment to Series 240, 250, nd
More informationCREEK Technical Services, LLC
Technicl Services, LLC Certificte of uthoriztion No. 29824 17520 Edinburgh Dr Tmp, FL 33647 (813) 480-3421 EVLUTION REPORT FLORID BUILDING CODE, 6 TH EDITION (2017) Mnufcturer: VRITILE INC. Issued ugust
More informationFLUID SYSTEMS. Products are available from MARYLAND METRICS
FLUID SYSTEMS Products re vilble from MARYLAND METRICS P.O. Box 26 Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 web: http://mdmetric.com emil: sles@mdmetric.com RFQ form:
More informationElectrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL
LICTION Electriclly operted directionl spool vlve with soft-shift function type WE10 NS 10 Electriclly operted directionl spool vlve type WE10 is intended for chnging the direction of fluid flow in hydrulic
More informationDPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. Conforms to EN stndrds. (TÜV pprovl) DIN trck mounting possible.
More information