Eurocode 8: Design of structures for earthquake resistance

Size: px
Start display at page:

Download "Eurocode 8: Design of structures for earthquake resistance"

Transcription

1 BRITISH STANDARD BS EN :2006 Eurocode 8: Design of structures for earthquake resistance Part 4: Silos, tanks and pipelines The European Standard EN :2006 has the status of a British Standard ICS

2 BS EN :2006 National foreword This British Standard was published by BSI. It is the UK implementation of EN :2006. It supersedes DD ENV :1999 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee B/525, Building and civil engineering structures, to Subcommittee B/525/8, Structures in seismic regions. A list of organizations represented on B/525/8 can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 September 2006 Amendments issued since publication Amd. No. Date Comments BSI 2006 ISBN

3 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN July 2006 ICS Supersedes ENV :1998 English Version Eurocode 8 - Design of structures for earthquake resistance - Part 4: Silos, tanks and pipelines Eurocode 8 - Calcul des structures pour leur résistance aux séismes - Partie 4: Silos, réservoirs et canalisations Eurocode 8 - Auslegung von Bauwerken gegen Erdbeben - Teil 4: Silos, Tankbauwerke und Rohrleitungen This European Standard was approved by CEN on 15 May CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN :2006: E

4 EN :2006 (E) Contents FOREWORD 1 GENERAL SCOPE NORMATIVE REFERENCES General reference standards ASSUMPTIONS DISTINCTION BETWEEN PRINCIPLES AND APPLICATIONS RULES TERMS AND DEFINITIONS General Terms common to all Eurocodes Further terms used in EN Further terms used in EN SYMBOLS S.I. UNITS GENERAL PRINCIPLES AND APPLICATION RULES SAFETY REQUIREMENTS General Ultimate limit state Damage limitation state Reliability differentiation System versus element reliability Conceptual design SEISMIC ACTION ANALYSIS Methods of analysis Interaction with the soil Damping Structural damping Contents damping Foundation damping Weighted damping BEHAVIOUR FACTORS SAFETY VERIFICATIONS General Combinations of seismic action with other actions SPECIFIC PRINCIPLES AND APPLICATION RULES FOR SILOS INTRODUCTION COMBINATION OF GROUND MOTION COMPONENTS ANALYSIS OF SILOS BEHAVIOUR FACTORS VERIFICATIONS Damage limitation state Ultimate limit state Global stability Shell Anchors Foundations SPECIFIC PRINCIPLES AND APPLICATION RULES FOR TANKS COMPLIANCE CRITERIA General Damage limitation state Ultimate limit state COMBINATION OF GROUND MOTION COMPONENTS

5 EN :2006 (E) 4.3 METHODS OF ANALYSIS General Hydrodynamic effects BEHAVIOUR FACTORS VERIFICATIONS Damage limitation state General Shell Piping Ultimate limit state Stability Shell Piping Anchorages Foundations COMPLEMENTARY MEASURES Bunding Sloshing Piping interaction SPECIFIC PRINCIPLES AND APPLICATION RULES FOR ABOVE-GROUND PIPELINES GENERAL SAFETY REQUIREMENTS Damage limitation state Ultimate limit state SEISMIC ACTION General Seismic action for inertia movements Differential movement METHODS OF ANALYSIS Modelling Analysis BEHAVIOUR FACTORS VERIFICATIONS SPECIFIC PRINCIPLES AND APPLICATION RULES FOR BURIED PIPELINES GENERAL SAFETY REQUIREMENTS Damage limitation state Ultimate limit state SEISMIC ACTION General Seismic action for inertia movements Modelling of seismic waves Permanent soil movements METHODS OF ANALYSIS (WAVE PASSAGE) VERIFICATIONS General Buried pipelines on stable soil Buried pipelines under differential ground movements (welded steel pipes) DESIGN MEASURES FOR FAULT CROSSINGS ANNEX A (INFORMATIVE) SEISMIC ANALYSIS PROCEDURES FOR TANKS ANNEX B (INFORMATIVE) BURIED PIPELINES

Eurocode 3 Design of steel structures

Eurocode 3 Design of steel structures BRITISH STANDARD BS EN 1993-3-2:2006 Eurocode 3 Design of steel structures Part 3-2: Towers, masts and chimneys Chimneys ICS 91.010.30; 91.060.40; 91.080.10 National foreword This British Standard is the

More information

Eurocode 2 Design of concrete structures

Eurocode 2 Design of concrete structures BRITISH STANDARD BS EN 1992-3:2006 Eurocode 2 Design of concrete structures Part 3: Liquid retaining and containment structures The European Standard EN 1992-3:2006 has the status of a British Standard

More information

Eurocode 3 Design of steel structures

Eurocode 3 Design of steel structures BRITISH STANDARD BS EN 1993-5:2007 Incorporating corrigendum May 2009 Eurocode 3 Design of steel structures Part 5: Piling ICS 91.010.30; 91.080.10 National foreword This British Standard is the UK implementation

More information

Eurocode 3 Design of steel structures

Eurocode 3 Design of steel structures BRITISH STANDARD BS EN 1993-2:2006 Incorporating corrigendum July 2009 Eurocode 3 Design of steel structures Part 2: Steel bridges ICS 91.010.30; 91.080.10; 93.040 National foreword This British Standard

More information

Eurocode 3 Design of steel structures

Eurocode 3 Design of steel structures BRITISH STANDARD BS EN 1993-1-5:2006 Incorporating corrigendum April 2009 Eurocode 3 Design of steel structures Part 1-5: Plated structural elements ICS 91.010.30; 91.080.10 National foreword This British

More information

Eurocode 3 Design of steel structures

Eurocode 3 Design of steel structures BRITISH STANDARD BS EN 1993-3-1:2006 Incorporating corrigendum July 2009 Eurocode 3 Design of steel structures Part 3-1: Towers, masts and chimneys Towers and masts ICS 91.010.30; 91.080.10 National foreword

More information

Eurocode 1 Actions on structures

Eurocode 1 Actions on structures BRITISH STANDARD Eurocode 1 Actions on structures BS EN 1991-1-3:2003 Incorporating corrigenda December 2004 and March 2009 Part 1-3: General actions Snow loads ICS 91.010.30 National foreword This British

More information

Eurocode 3 Design of steel structures

Eurocode 3 Design of steel structures BRITISH STANDARD BS EN 1993-1-6:2007 Incorporating corrigendum April 2009 Eurocode 3 Design of steel structures Part 1-6: Strength and Stability of Shell Structures ICS 91.010.30; 91.080.10 National foreword

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-31521-4 EN 300:2006 SOUTH AFRICAN NATIONAL STANDARD Oriented Strand Boards (OSB) Definitions, classification and specifications This national standard is the identical implementation of

More information

DEUTSCHE NORM February 2005 DIN EN ISO 1514 { Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514

DEUTSCHE NORM February 2005 DIN EN ISO 1514 { Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514 DEUTSCHE NORM February 2005 DIN EN ISO 1514 { ICS 87.100 Supersedes September 1997 edition. Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514 Beschichtungsstoffe

More information

Provläsningsexemplar / Preview

Provläsningsexemplar / Preview Provläsningsexemplar / Preview EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 14975:2006+A1 July 2010 ICS 91.060.30 Supersedes EN 14975:2006 English Version Loft ladders - Requirements, marking

More information

Eurocode 1: Actions on structures

Eurocode 1: Actions on structures BRITISH STANDARD Eurocode 1: Actions on structures BS EN 1991-1-4:2005 +A1:2010 Incorporating corrigenda July 2009 and January 2010 Part 1-4: General actions Wind actions ICS 91.010.30 National foreword

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-28152-6 EN 197-1:2011 SOUTH AFRICAN NATIONAL STANDARD Cement Part 1: Composition, specifications and conformity criteria for common cements This national standard is the identical implementation

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-29507-3 EN 413-1:2011 SOUTH AFRICAN NATIONAL STANDARD Masonry cement Part 1: Composition, specifications and conformity criteria This national standard is the identical implementation of

More information

Steel wire ropes - Terminations for steel wire ropes Safety - Metal and resin socketing

Steel wire ropes - Terminations for steel wire ropes Safety - Metal and resin socketing Draft SI part 34 34 October 2011 2011 ICS CODE ###### Steel wire ropes Terminations for steel wire ropes Safety Metal and resin socketing The Standards Institution of Israel 24/10/11 #### wwwsiiorgil 036412762

More information

DEUTSCHE NORM June Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO : 2001)

DEUTSCHE NORM June Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO : 2001) DEUTSCHE NORM June 2002 Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO 1043-1 : 2001) English version of DIN EN ISO 1043-1 { EN ISO 1043-1 ICS 01.040.83;

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-32581-7 SOUTH AFRICAN NATIONAL STANDARD Gravity drainage systems inside buildings Part 3: Roof drainage, layout and calculation This national standard is the identical implementation of,

More information

DEUTSCHE NORM October Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887

DEUTSCHE NORM October Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887 DEUTSCHE NORM October 2003 Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887 { EN ISO 3887 ICS 77.040.99 Stahl Bestimmung der Entkohlungstiefe (ISO 3887

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-26065-1 Edition 1 EN 12281:2002 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Printing and business paper Requirements for copy paper for dry toner imaging processes This national standard is

More information

DEUTSCHE NORM July 2004 DIN EN ISO 9038 { Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038

DEUTSCHE NORM July 2004 DIN EN ISO 9038 { Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038 DEUTSCHE NORM July 2004 DIN EN ISO 9038 { ICS 13.220.40; 87.040 Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038 Prüfung der Weiterbrennbarkeit von Flüssigkeiten

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12606-1:2007 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation Bitumen and bituminous binders - Determination of the paraffin

More information

WATER-TUBE BOILERS AND AUXILIARY

WATER-TUBE BOILERS AND AUXILIARY IRISH STANDARD I.S. EN 12952-12:2003 ICS 13.060.25 27.040 WATER-TUBE BOILERS AND AUXILIARY National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 INSTALLATIONS -

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14432:2006 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Product discharge and air inlet valves Tanks for the transport of dangerous

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12900:2005 Refrigerant compressors - Rating conditions, tolerances and presentation of manufacturer's performance data Refrigerant compressors - Rating conditions, tolerances and

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 10219-2:2006 Külmsurvevormitud keevitatud konstruktsiooni-õõnesprofiilid mittelegeerja peeneteraterastest. Osa 2: Tolerantsid, mõõtmed ja profiili omadused Cold formed welded structural

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15469:2007 Petroleum products - Test method for free water in liquefied petroleum gas by visual inspection Petroleum products - Test method for free water in liquefied petroleum gas

More information

COLD ROLLED STEEL SECTIONS -

COLD ROLLED STEEL SECTIONS - STANDARD I.S. EN 10162:2003 ICS 77.140.70 National Standards Authority of Ireland Dublin 9 Ireland COLD ROLLED STEEL SECTIONS - Tel: (01) 807 3800 Fax: (01) 807 3838 TECHNICAL DELIVERY CONDITIONS - DIMENSIONAL

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12642:2006 Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements Securing of cargo on road vehicles - Body structure of commercial vehicles

More information

DEUTSCHE NORM January 2004 DIN EN {

DEUTSCHE NORM January 2004 DIN EN { DEUTSCHE NORM January 2004 DIN EN 13698-1 { ICS 55.180.20 Supersedes DIN 15146-2, November 1986 edition. Pallet production specification Part 1: Construction specification for 800 mm 1200 mm flat wooden

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12592:2007 Bitumen and bituminous binders - Determination of solubility Bitumen and bituminous binders - Determination of solubility EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 1983:2006 Tööstuslikud ventiilid. Terasest kuulklapid Industrial valves - Steel ball valves EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14620-3:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-30207-8 SOUTH AFRICAN NATIONAL STANDARD Chemicals used for treatment of water intended for human consumption Chlorine This national standard is the identical implementation of and is adopted

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 840-1:2004 Teisaldatavad heitmekonteinerid. Osa 1: Kaherattalised konteinerid mahuga kuni 400 l, tõstmiseks kammtõsteseadistega, mõõtmed ja konstrueerimine Mobile waste containers

More information

DEUTSCHE NORM DIN EN 10080

DEUTSCHE NORM DIN EN 10080 DEUTSCHE NORM DIN EN 10080 August 2005 { ICS 77.140.15; 77.140.60; 77.140.65 Supersedes DIN V ENV 10080, August 1995 edition, parts of DIN 488-1, September 1984 edition, DIN 488-2, DIN 488-4 and DIN 488-6,

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14895:2006 Bitumen and bituminous binders - Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders Bitumen and bituminous binders - Stabilisation

More information

DEUTSCHE NORM January Fasteners Electroplated coatings (ISO 4042 : 1999) English version of DIN EN ISO 4042

DEUTSCHE NORM January Fasteners Electroplated coatings (ISO 4042 : 1999) English version of DIN EN ISO 4042 DEUTSCHE NORM January 2001 Fasteners Electroplated coatings (ISO 4042 : 1999) English version of DIN EN ISO 4042 { EN ISO 4042 ICS 21.060.01; 25.220.40 Verbindungselemente Galvanische Überzüge (ISO 4042

More information

EVS-EN 13953:2003+A1:2007 This document is a preview generated by EVS

EVS-EN 13953:2003+A1:2007 This document is a preview generated by EVS EESTI STANDARD EVS-EN 13953:2003+A1:2007 LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) (KONSOLIDEERITUD TEKST) LPG equipment

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15491:2007 Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method Ethanol as a blending component for petrol - Determination

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15020:2006 Raudteealased rakendused. Pukseerseadmed. Toimimisnõuded, liidese erigeomeetria ja katsemeetodid Railway applications - Rescue coupler - Performance requirements, specific

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 284:2006 Transpordipakendid. Klassi C transpordipakendid. Mõõtmed ja üldnõuded Swap bodies - Non-stackable swap bodies of class C - Dimensions and general requirements EESTI STANDARDIKESKUS

More information

RESILIENT AND LAMINATE FLOOR COVERINGS - CASTOR CHAIR TEST IRISH STANDARD I.S. EN 425:2002. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann

RESILIENT AND LAMINATE FLOOR COVERINGS - CASTOR CHAIR TEST IRISH STANDARD I.S. EN 425:2002. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann IRISH STANDARD I.S. EN 425:2002 ICS 97.150 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 RESILIENT AND LAMINATE FLOOR COVERINGS - CASTOR CHAIR TEST NSAI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15520:2007 Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings Thermal spraying - Recommendations for constructional design

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14067-3:2003 Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels EESTI STANDARDIKESKUS EESTI

More information

Continuously hot-rolled strip and plate/sheet cut from wide strip of nonalloy and alloy steels - Tolerances on dimensions and shape

Continuously hot-rolled strip and plate/sheet cut from wide strip of nonalloy and alloy steels - Tolerances on dimensions and shape Irish Standard Continuously hot-rolled strip and plate/sheet cut from wide strip of nonalloy and alloy steels - Tolerances on dimensions and shape NSAI 2010 No copying without NSAI permission except as

More information

Waste fittings for sanitary appliances

Waste fittings for sanitary appliances BRITISH STANDARD BS EN 274-2:2002 Incorporating Corrigendum No. 1 Waste fittings for sanitary appliances Part 2: Test methods The European Standard EN 274-2:2002 has the status of a British Standard ICS

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 11446:2004 Passenger cars and light commercial vehicles with 12 V systems - 13-pole connectors between towing vehicles and trailers - Dimensions and contact allocation Passenger

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12122:2005 Chemicals used for treatment of water intended for human consumption - Ammonium solution Chemicals used for treatment of water intended for human consumption - Ammonia

More information

DEUTSCHE NORM March Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016

DEUTSCHE NORM March Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016 DEUTSCHE NORM March 2001 Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016 { EN ISO 4016 ICS 21.060.10 Sechskantschrauben mit Schaft Produktklasse C (ISO 4016 : 1999)

More information

DEUTSCHE NORM October Structural steel equal and unequal leg angles Part 1: Dimensions English version of DIN EN

DEUTSCHE NORM October Structural steel equal and unequal leg angles Part 1: Dimensions English version of DIN EN DEUTSCHE NORM October 1998 Structural steel equal and unequal leg angles Part 1: Dimensions English version of DIN EN 10056-1 { EN 10056-1 ICS 77.140.70 Descriptors: Structural steel, angles, dimensions.

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12173:2005 Chemicals used for treatment of water intended for human consumption - Sodium fluoride Chemicals used for treatment of water intended for human consumption - Sodium fluoride

More information

DEUTSCHE NORM May 2004 DIN EN ISO 4029 { Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029

DEUTSCHE NORM May 2004 DIN EN ISO 4029 { Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029 DEUTSCHE NORM May 2004 DIN EN ISO 4029 { ICS 21.060.10 Supersedes DIN 916, December 1980 edition. Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029 Gewindestifte

More information

INDUSTRIAL VALVES - ISOLATING VALVES FOR LNG - SPECIFICATION FOR SUITABILITY AND APPROPRIATE VERIFICATION TESTS IRISH STANDARD I.S.

INDUSTRIAL VALVES - ISOLATING VALVES FOR LNG - SPECIFICATION FOR SUITABILITY AND APPROPRIATE VERIFICATION TESTS IRISH STANDARD I.S. IRISH STANDARD I.S. EN 12567:2000 ICS 23.060.01 National Standards Authority of Ireland Dublin 9 Ireland INDUSTRIAL VALVES - ISOLATING VALVES Tel: (01) 807 3800 Tel: (01) 807 3838 FOR LNG - SPECIFICATION

More information

ILNAS-EN 15663:2017. Railway applications - Vehicle reference masses. Bahnanwendungen - Fahrzeugreferenzmassen

ILNAS-EN 15663:2017. Railway applications - Vehicle reference masses. Bahnanwendungen - Fahrzeugreferenzmassen Railway applications - Vehicle reference masses Bahnanwendungen - Fahrzeugreferenzmassen Applications ferroviaires - Masses de référence des véhicules 07/2017 National Foreword This European Standard EN

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15490:2007 Ethanol as a blending component for petrol - Determination of phe Ethanol as a blending component for petrol - Determination of phe EESTI STANDARDIKESKUS EESTI STANDARDI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12674-3:2004 Roll containers - Part 3: Test methods Roll containers - Part 3: Test methods EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12120:2005 Chemicals used for treatment of water intended for human consumption - Sodium hydrogen sulfite Chemicals used for treatment of water intended for human consumption - Sodium

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14522:2005 Gaaside ja aurude isesüttimistemperatuuri määramine Determination of the auto ignition temperature of gases and vapours EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL

More information

SVENSK STANDARD SS-EN 1949/A1:2005. Gasutrustningar Gasolanläggningar i husvagnar och i andra vägfordon avsedda för boende Installationsanvisningar

SVENSK STANDARD SS-EN 1949/A1:2005. Gasutrustningar Gasolanläggningar i husvagnar och i andra vägfordon avsedda för boende Installationsanvisningar SVENSK STANDARD SS-EN 1949/A1:2005 Fastställd 2005-07-28 Utgåva 1 Gasutrustningar Gasolanläggningar i husvagnar och i andra vägfordon avsedda för boende Installationsanvisningar Specification for the installation

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14832:2005 Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids Petroleum and related products - Determination

More information

DEUTSCHE NORM February 2003

DEUTSCHE NORM February 2003 DEUTSCHE NORM February 2003 Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylenediene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)- styrene (ACS) moulding and extrusion

More information

SVENSK STANDARD SS-EN :2006. Offshore containers and associated lifting sets Part 2: Lifting sets Design, manufacture and marking

SVENSK STANDARD SS-EN :2006. Offshore containers and associated lifting sets Part 2: Lifting sets Design, manufacture and marking SVENSK STANDARD SS-EN 12079-2:2006 Fastställd 2006-04-28 Utgåva 1 Offshore containers and associated lifting sets Part 2: Lifting sets Design, manufacture and marking ICS 55.180.10 Språk: engelska Publicerad:

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-28107-6 EN 1008:2002 SOUTH AFRICAN NATIONAL STANDARD Mixing water for concrete Specification for sampling, testing and assessing the suitability of water, including water recovered from

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13452-1:2003 Railway applications - Braking - Mass transit brake systems - Part 1: Performance requirements Railway applications - Braking - Mass transit brake systems - Part 1: Performance

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13149-1:2004 Public transport - Road vehicle scheduling and control systems - Part 1: WORLDFIP definition and application rules for onboard data transmission Public transport - Road

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15199-2:2006 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuel Petroleum products - Determination

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 805:2000 Water supply - Requirements for systems and components outside buildings Water supply - Requirements for systems and components outside buildings EESTI STANDARDIKESKUS EESTI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15519:2007 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract Paper and board intended to come into contact with foodstuffs

More information

Provläsningsexemplar / Preview SVENSK STANDARD SS-EN 13577:2007 Fastställd 2007-04-16 Utgåva 1 Betong Kemiskt angrepp Bestämning av halt av aggressiv koldioxid i vatten Chemical attack on concrete Determination

More information

Laboratorieglas Byretter (ISO 385:2005)

Laboratorieglas Byretter (ISO 385:2005) SVENSK STANDARD SS-EN ISO 385:2005 Fastställd 2005-07-11 Utgåva 1 Laboratorieglas Byretter (ISO 385:2005) Laboratory glassware Burettes (ISO 385:2005) ICS 17.060; 71.040.20 Språk: engelska Publicerad:

More information

Skyddshandskar mot kemikalier och mikroorganismer

Skyddshandskar mot kemikalier och mikroorganismer SVENSK STANDARD SS-EN 374-1:2004 Fastställd 2004-01-23 Utgåva 2 Skyddshandskar mot kemikalier och mikroorganismer Del 1: Terminologi och fordringar på prestanda Protective gloves against chemicals and

More information

DEUTSCHE NORM June 2002

DEUTSCHE NORM June 2002 DEUTSCHE NORM June 2002 Flanges and their joints Circular flanges for pipes, valves, fittings and accessories Part 1: Steel flanges, PN designated English version of DIN EN 1092-1 { EN 1092-1 ICS 23.040.60

More information

Provläsningsexemplar / Preview SVENSK STANDARD SS-EN 14667:2006 Fastställd 2006-12-06 Utgåva 1 Surface active agents Determination of low boiling solvents in liquid formulations Gas chromatographic method

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12284:2003 Külmetussüsteemid ja soojuspumbad. Ventiilid. Nõuded, testimine ja markeerimine Refrigerating systems and heat pumps - Valves - Requirements, testing and marking EESTI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12514-1:2000 Installations for oil supply systems for oil burners - Part 1: Safety requirements and tests - Parts, oil feed pumps, control and safety devices, supply tanks Installations

More information

Skeppsteknik Framdrivningsaggregat för fartyg Del 1: Ordlista för propellrars geometri (ISO :2002)

Skeppsteknik Framdrivningsaggregat för fartyg Del 1: Ordlista för propellrars geometri (ISO :2002) SVENSK STANDARD SS- Fastställd 2004-03-05 Utgåva 1 Skeppsteknik Framdrivningsaggregat för fartyg Del 1: Ordlista för propellrars geometri (ISO 3715-1:2002) Ships and marine technology Propulsion plants

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13652:2002 Soil improvers and growing media - Extraction of water soluble nutrients and elements Soil improvers and growing media - Extraction of water soluble nutrients and elements

More information

Plastics Polyoxymethylene (POM) moulding and extrusion materials Part 1: Designation system and basis for specifications (ISO :2004)

Plastics Polyoxymethylene (POM) moulding and extrusion materials Part 1: Designation system and basis for specifications (ISO :2004) SVENSK STANDARD SS-EN ISO 9988-1:2006 Fastställd 2006-04-12 Utgåva 1 Plast Sprutmassor av polyoxymetylen (POM) Del 1: Beteckningssystem och specifikationsgrund (ISO 9988-1:2004) Plastics Polyoxymethylene

More information

Gasflaskor Fyllningsförhållanden för batterifordon för acetylen

Gasflaskor Fyllningsförhållanden för batterifordon för acetylen SVENSK STANDARD SS-EN 13720 Fastställd 2003-03-28 Utgåva 1 Gasflaskor Fyllningsförhållanden för batterifordon för acetylen Transportable gas cylinders Filling conditions for acetylene battery vehicles

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14157:2004 Natural stone test methods - Determination of the abrasion resistance Natural stone test methods - Determination of the abrasion resistance EESTI STANDARDIKESKUS EESTI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12712:2000 Plastics jerricans - Jerricans with a nominal capacity of 20 l to 60 l for optimal utilisation of pallet sizes 800 x 1200, 1000 x 1200 and 1140 x 1140 mm Plastics jerricans

More information

Flanges and their joints Gaskets for PNdesignated

Flanges and their joints Gaskets for PNdesignated SVENSK STANDARD SS-EN 1514-2:2005 Fastställd 2005-06-09 Utgåva 2 Flänsar och deras förband Packningar för PNbetecknade flänsar Del 2: Spirallindade packningar för stålflänsar Flanges and their joints Gaskets

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14367:2005 Backflow preventer with different non controllable pressure zones - Family C - Type A Non controllable backflow preventer with different pressure zones - Family C, type

More information

DEUTSCHE NORM June 2006 DIN EN { ICS Supersedes DIN EN : See start of validity

DEUTSCHE NORM June 2006 DIN EN { ICS Supersedes DIN EN : See start of validity DEUTSCHE NORM June 2006 DIN EN 14399-6 { ICS 21.060.30 Supersedes DIN EN 14399-6:2005-06 See start of validity High-strength structural bolting assemblies for preloading Part 6: Plain chamfered washers

More information

http://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se Provläsningsexemplar / Preview SVENSK STANDARD SS-EN 14420-6:2004+A1:2007 Fastställd 2007-02-09 Utgåva 1 Klämkoppling

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12723:2000 Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units Liquid pumps - General terms for pumps and installations -

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12591:2000 Bitumen and bituminous binders - Specifications for paving grade bitumens Bitumen and bituminous binders - Specifications for paving grade bitumens EESTI STANDARDIKESKUS

More information

Gas turbines Procurement

Gas turbines Procurement BRITISH STANDARD Gas turbines Procurement BS EN ISO 3977-5:2003 Incorporating Amendment No. 1 (renumbers BS ISO 3977-5:2001 as BS EN ISO 3977-5:2003) Part 5: Applications for petroleum and natural gas

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13535:2001 Fertilizers and liming materials - Classification Fertilizers and liming materials - Classification EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13654-1:2002 Soil improvers and growing media - Determination of nitrogen - Part 1: Modified Kjeldahl method Soil improvers and growing media - Determination of nitrogen - Part 1:

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12255-6:2002 Wastewater treatment plants - Part 6: Activated sludge processes Wastewater treatment plants - Part 6: Activated sludge processes EESTI STANDARDIKESKUS EESTI STANDARDI

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ICS 83.080.20; 83.140.30 ISBN 0-626-14156-7 SANS 12107:2003 SOUTH AFRICAN NATIONAL STANDARD Plastics piping systems Injection-moulded thermoplastics fittings, valves and ancillary equipment Determination

More information

DEUTSCHE NORM July 1998

DEUTSCHE NORM July 1998 DEUTSCHE NORM July 1998 Non-destructive testing of steel forgings Part 3: Ultrasonic testing of ferritic or martensitic steel forgings English version of DIN EN 10228-3 { EN 10228-3 ICS 77.040.20; 77.140.85

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 6245:2003 Naftasaadused. Tuha määramine Petroleum products - Determination of ash EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN

More information

Garden equipment Powered lawnmowers Safety

Garden equipment Powered lawnmowers Safety SVENSK STANDARD SS-EN 836/A3:2004 Fastställd 2004-02-13 Utgåva 1 Trädgårdsmaskiner Motordrivna gräsklippare Maskinsäkerhet Garden equipment Powered lawnmowers Safety ICS 65.060.70 Språk: engelska Publicerad:

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12092:2002 Adhesives - Determination of viscosity Adhesives - Determination of viscosity EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN

More information

Part 1: Specifications for pipes, fittings and the system English version of DIN EN

Part 1: Specifications for pipes, fittings and the system English version of DIN EN DEUTSCHE NORM December 1999 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure Unplasticized poly(vinyl chloride) (PVC-U) Part 1: Specifications

More information

SVENSK STANDARD SS-EN ISO 4684:2005. Läder Kemiska provningar Bestämning av flyktiga ämnen (ISO 4684:2005)

SVENSK STANDARD SS-EN ISO 4684:2005. Läder Kemiska provningar Bestämning av flyktiga ämnen (ISO 4684:2005) SVENSK STANDARD SS-EN ISO 4684:2005 Fastställd 2005-11-11 Utgåva 1 Läder Kemiska provningar Bestämning av flyktiga ämnen (ISO 4684:2005) Leather Chemical tests Determination of volatile matter (ISO 4684:2005)

More information

SVENSK STANDARD SS-EN 15490:2007. Etanol som blandningskomponent i bensin Bestämning av phe

SVENSK STANDARD SS-EN 15490:2007. Etanol som blandningskomponent i bensin Bestämning av phe SVENSK STANDARD SS-EN 15490:2007 Fastställd 2007-09-03 Utgåva 1 Etanol som blandningskomponent i bensin Bestämning av phe Ethanol as a blending component for petrol Determination of phe ICS 71.080.60;

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION CLC/TS 50457-1 SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION March 2008 ICS 43.120 Supersedes ENV 50275-2-3:1998 English version Conductive charging for electric vehicles - Part

More information