SOUTH AFRICAN NATIONAL STANDARD
|
|
- Eustacia Bennett
- 5 years ago
- Views:
Transcription
1 ISBN EN 197-1:2011 SOUTH AFRICAN NATIONAL STANDARD Cement Part 1: Composition, specifications and conformity criteria for common cements This national standard is the identical implementation of EN 197-1:2011, and is adopted with the permission of CEN, rue de Stassart 36, B-1050 Brussels. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: Fax: SABS
2 EN 197-1:2011 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Committee SABS SC 59A, Construction standards Cement, lime and concrete, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in May This SANS document supersedes SANS :2000 (edition 1, as modified by EN amdt 1:2004 and Nat. amdt 1:2006). This document is referenced in the Compulsory specification for cement, as published by Government Notice No. R. 544 (Government Gazette No ) of 6 July 2007.
3 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN September 2011 ICS Supersedes EN 197-1:2000, EN 197-4:2004 English Version Cement - Part 1: Composition, specifications and conformity criteria for common cements Ciment - Partie 1 : Composition, spécifications et critères des conformité des ciments courants Zement - Teil 1: Zusammensetzung, Anforderungen und Konformitätskriterien von Normalzement This European Standard was approved by CEN on 6 August CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 197-1:2011: E
4 EN 197-1:2011 (E) Contents Page Foreword... 4 Introduction Scope Normative references Terms and definitions Cement Constituents General Main constituents Portland cement clinker (K) Granulated blast furnace slag (S) Pozzolanic materials (P, Q) Fly ashes (V, W) Burnt shale (T) Limestone (L, LL) Silica fume (D) Minor additional constituents Calcium sulfate Additives Composition and notation Composition and notation of common cements Composition and notation of sulfate resisting common cements (SR-Cements) Composition and notation of low early strength common cements Mechanical, physical, chemical and durability requirements Mechanical requirements Standard strength Early strength Physical requirements Initial setting time Soundness Heat of hydration Chemical requirements Durability requirements General Sulfate resistance Standard designation Conformity criteria General requirements Conformity criteria for mechanical, physical and chemical properties and evaluation procedure General Statistical conformity criteria Single result conformity criteria Conformity criteria for cement composition Conformity criteria for properties of the cement constituents
5 EN 197-1:2011 (E) Annex A (informative) List of common cements considered as sulfate resisting by National Standards in different CEN member countries but not included in Table 2 or not fulfilling the requirements given in Table Annex ZA (informative) Clauses of this European standard addressing the provisions of the EU Construction Products Directive ZA.1 Scope and relevant characteristics ZA.2 Procedure for the attestation of conformity of products ZA.2.1 System of attestation of conformity ZA.2.2 EC certificate of conformity ZA.3 CE marking and labelling Bibliography
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29507-3 EN 413-1:2011 SOUTH AFRICAN NATIONAL STANDARD Masonry cement Part 1: Composition, specifications and conformity criteria This national standard is the identical implementation of
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31521-4 EN 300:2006 SOUTH AFRICAN NATIONAL STANDARD Oriented Strand Boards (OSB) Definitions, classification and specifications This national standard is the identical implementation of
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26065-1 Edition 1 EN 12281:2002 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Printing and business paper Requirements for copy paper for dry toner imaging processes This national standard is
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30207-8 SOUTH AFRICAN NATIONAL STANDARD Chemicals used for treatment of water intended for human consumption Chlorine This national standard is the identical implementation of and is adopted
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32581-7 SOUTH AFRICAN NATIONAL STANDARD Gravity drainage systems inside buildings Part 3: Roof drainage, layout and calculation This national standard is the identical implementation of,
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28107-6 EN 1008:2002 SOUTH AFRICAN NATIONAL STANDARD Mixing water for concrete Specification for sampling, testing and assessing the suitability of water, including water recovered from
More informationProvläsningsexemplar / Preview
Provläsningsexemplar / Preview EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 14975:2006+A1 July 2010 ICS 91.060.30 Supersedes EN 14975:2006 English Version Loft ladders - Requirements, marking
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-5:2007 Incorporating corrigendum May 2009 Eurocode 3 Design of steel structures Part 5: Piling ICS 91.010.30; 91.080.10 National foreword This British Standard is the UK implementation
More informationDEUTSCHE NORM February 2005 DIN EN ISO 1514 { Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514
DEUTSCHE NORM February 2005 DIN EN ISO 1514 { ICS 87.100 Supersedes September 1997 edition. Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514 Beschichtungsstoffe
More informationEurocode 8: Design of structures for earthquake resistance
BRITISH STANDARD BS EN 1998-4:2006 Eurocode 8: Design of structures for earthquake resistance Part 4: Silos, tanks and pipelines The European Standard EN 1998-4:2006 has the status of a British Standard
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-3-2:2006 Eurocode 3 Design of steel structures Part 3-2: Towers, masts and chimneys Chimneys ICS 91.010.30; 91.060.40; 91.080.10 National foreword This British Standard is the
More informationSteel wire ropes - Terminations for steel wire ropes Safety - Metal and resin socketing
Draft SI part 34 34 October 2011 2011 ICS CODE ###### Steel wire ropes Terminations for steel wire ropes Safety Metal and resin socketing The Standards Institution of Israel 24/10/11 #### wwwsiiorgil 036412762
More informationEurocode 2 Design of concrete structures
BRITISH STANDARD BS EN 1992-3:2006 Eurocode 2 Design of concrete structures Part 3: Liquid retaining and containment structures The European Standard EN 1992-3:2006 has the status of a British Standard
More informationDEUTSCHE NORM DIN EN 10080
DEUTSCHE NORM DIN EN 10080 August 2005 { ICS 77.140.15; 77.140.60; 77.140.65 Supersedes DIN V ENV 10080, August 1995 edition, parts of DIN 488-1, September 1984 edition, DIN 488-2, DIN 488-4 and DIN 488-6,
More informationDEUTSCHE NORM October Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887
DEUTSCHE NORM October 2003 Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887 { EN ISO 3887 ICS 77.040.99 Stahl Bestimmung der Entkohlungstiefe (ISO 3887
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-2:2006 Incorporating corrigendum July 2009 Eurocode 3 Design of steel structures Part 2: Steel bridges ICS 91.010.30; 91.080.10; 93.040 National foreword This British Standard
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-1-5:2006 Incorporating corrigendum April 2009 Eurocode 3 Design of steel structures Part 1-5: Plated structural elements ICS 91.010.30; 91.080.10 National foreword This British
More informationSOUTH AFRICAN NATIONAL STANDARD
ICS 83.080.20; 83.140.30 ISBN 0-626-14156-7 SANS 12107:2003 SOUTH AFRICAN NATIONAL STANDARD Plastics piping systems Injection-moulded thermoplastics fittings, valves and ancillary equipment Determination
More informationILNAS-EN 15663:2017. Railway applications - Vehicle reference masses. Bahnanwendungen - Fahrzeugreferenzmassen
Railway applications - Vehicle reference masses Bahnanwendungen - Fahrzeugreferenzmassen Applications ferroviaires - Masses de référence des véhicules 07/2017 National Foreword This European Standard EN
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-3-1:2006 Incorporating corrigendum July 2009 Eurocode 3 Design of steel structures Part 3-1: Towers, masts and chimneys Towers and masts ICS 91.010.30; 91.080.10 National foreword
More informationWATER-TUBE BOILERS AND AUXILIARY
IRISH STANDARD I.S. EN 12952-12:2003 ICS 13.060.25 27.040 WATER-TUBE BOILERS AND AUXILIARY National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 INSTALLATIONS -
More informationDEUTSCHE NORM July 2004 DIN EN ISO 9038 { Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038
DEUTSCHE NORM July 2004 DIN EN ISO 9038 { ICS 13.220.40; 87.040 Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038 Prüfung der Weiterbrennbarkeit von Flüssigkeiten
More informationDEUTSCHE NORM June Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO : 2001)
DEUTSCHE NORM June 2002 Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO 1043-1 : 2001) English version of DIN EN ISO 1043-1 { EN ISO 1043-1 ICS 01.040.83;
More informationContinuously hot-rolled strip and plate/sheet cut from wide strip of nonalloy and alloy steels - Tolerances on dimensions and shape
Irish Standard Continuously hot-rolled strip and plate/sheet cut from wide strip of nonalloy and alloy steels - Tolerances on dimensions and shape NSAI 2010 No copying without NSAI permission except as
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 284:2006 Transpordipakendid. Klassi C transpordipakendid. Mõõtmed ja üldnõuded Swap bodies - Non-stackable swap bodies of class C - Dimensions and general requirements EESTI STANDARDIKESKUS
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15469:2007 Petroleum products - Test method for free water in liquefied petroleum gas by visual inspection Petroleum products - Test method for free water in liquefied petroleum gas
More informationDEUTSCHE NORM January Fasteners Electroplated coatings (ISO 4042 : 1999) English version of DIN EN ISO 4042
DEUTSCHE NORM January 2001 Fasteners Electroplated coatings (ISO 4042 : 1999) English version of DIN EN ISO 4042 { EN ISO 4042 ICS 21.060.01; 25.220.40 Verbindungselemente Galvanische Überzüge (ISO 4042
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12642:2006 Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements Securing of cargo on road vehicles - Body structure of commercial vehicles
More informationCOLD ROLLED STEEL SECTIONS -
STANDARD I.S. EN 10162:2003 ICS 77.140.70 National Standards Authority of Ireland Dublin 9 Ireland COLD ROLLED STEEL SECTIONS - Tel: (01) 807 3800 Fax: (01) 807 3838 TECHNICAL DELIVERY CONDITIONS - DIMENSIONAL
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1983:2006 Tööstuslikud ventiilid. Terasest kuulklapid Industrial valves - Steel ball valves EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12606-1:2007 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation Bitumen and bituminous binders - Determination of the paraffin
More informationDEUTSCHE NORM January 2004 DIN EN {
DEUTSCHE NORM January 2004 DIN EN 13698-1 { ICS 55.180.20 Supersedes DIN 15146-2, November 1986 edition. Pallet production specification Part 1: Construction specification for 800 mm 1200 mm flat wooden
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12592:2007 Bitumen and bituminous binders - Determination of solubility Bitumen and bituminous binders - Determination of solubility EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12900:2005 Refrigerant compressors - Rating conditions, tolerances and presentation of manufacturer's performance data Refrigerant compressors - Rating conditions, tolerances and
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12120:2005 Chemicals used for treatment of water intended for human consumption - Sodium hydrogen sulfite Chemicals used for treatment of water intended for human consumption - Sodium
More informationEurocode 1 Actions on structures
BRITISH STANDARD Eurocode 1 Actions on structures BS EN 1991-1-3:2003 Incorporating corrigenda December 2004 and March 2009 Part 1-3: General actions Snow loads ICS 91.010.30 National foreword This British
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-1-6:2007 Incorporating corrigendum April 2009 Eurocode 3 Design of steel structures Part 1-6: Strength and Stability of Shell Structures ICS 91.010.30; 91.080.10 National foreword
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12122:2005 Chemicals used for treatment of water intended for human consumption - Ammonium solution Chemicals used for treatment of water intended for human consumption - Ammonia
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14432:2006 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Product discharge and air inlet valves Tanks for the transport of dangerous
More informationDEUTSCHE NORM May 2004 DIN EN ISO 4029 { Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029
DEUTSCHE NORM May 2004 DIN EN ISO 4029 { ICS 21.060.10 Supersedes DIN 916, December 1980 edition. Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029 Gewindestifte
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15020:2006 Raudteealased rakendused. Pukseerseadmed. Toimimisnõuded, liidese erigeomeetria ja katsemeetodid Railway applications - Rescue coupler - Performance requirements, specific
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15520:2007 Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings Thermal spraying - Recommendations for constructional design
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15491:2007 Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method Ethanol as a blending component for petrol - Determination
More informationDEUTSCHE NORM March Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016
DEUTSCHE NORM March 2001 Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016 { EN ISO 4016 ICS 21.060.10 Sechskantschrauben mit Schaft Produktklasse C (ISO 4016 : 1999)
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12173:2005 Chemicals used for treatment of water intended for human consumption - Sodium fluoride Chemicals used for treatment of water intended for human consumption - Sodium fluoride
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 10219-2:2006 Külmsurvevormitud keevitatud konstruktsiooni-õõnesprofiilid mittelegeerja peeneteraterastest. Osa 2: Tolerantsid, mõõtmed ja profiili omadused Cold formed welded structural
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15490:2007 Ethanol as a blending component for petrol - Determination of phe Ethanol as a blending component for petrol - Determination of phe EESTI STANDARDIKESKUS EESTI STANDARDI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 11446:2004 Passenger cars and light commercial vehicles with 12 V systems - 13-pole connectors between towing vehicles and trailers - Dimensions and contact allocation Passenger
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14895:2006 Bitumen and bituminous binders - Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders Bitumen and bituminous binders - Stabilisation
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 840-1:2004 Teisaldatavad heitmekonteinerid. Osa 1: Kaherattalised konteinerid mahuga kuni 400 l, tõstmiseks kammtõsteseadistega, mõõtmed ja konstrueerimine Mobile waste containers
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15519:2007 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract Paper and board intended to come into contact with foodstuffs
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14620-3:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14522:2005 Gaaside ja aurude isesüttimistemperatuuri määramine Determination of the auto ignition temperature of gases and vapours EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL
More informationEVS-EN 13953:2003+A1:2007 This document is a preview generated by EVS
EESTI STANDARD EVS-EN 13953:2003+A1:2007 LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) (KONSOLIDEERITUD TEKST) LPG equipment
More informationProvläsningsexemplar / Preview SVENSK STANDARD SS-EN 13577:2007 Fastställd 2007-04-16 Utgåva 1 Betong Kemiskt angrepp Bestämning av halt av aggressiv koldioxid i vatten Chemical attack on concrete Determination
More informationBUILDING LIME - PART 2: TEST METHODS IRISH STANDARD I.S. EN 459-2:2002. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN 459-2:2002 ICS 91.100.10 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 BUILDING LIME - PART 2: TEST METHODS NSAI 2002 Údarás um Chaighdeáin
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12674-3:2004 Roll containers - Part 3: Test methods Roll containers - Part 3: Test methods EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard
More informationDEUTSCHE NORM February 2003
DEUTSCHE NORM February 2003 Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylenediene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)- styrene (ACS) moulding and extrusion
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION CLC/TS 50457-1 SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION March 2008 ICS 43.120 Supersedes ENV 50275-2-3:1998 English version Conductive charging for electric vehicles - Part
More informationSVENSK STANDARD SS-EN 1949/A1:2005. Gasutrustningar Gasolanläggningar i husvagnar och i andra vägfordon avsedda för boende Installationsanvisningar
SVENSK STANDARD SS-EN 1949/A1:2005 Fastställd 2005-07-28 Utgåva 1 Gasutrustningar Gasolanläggningar i husvagnar och i andra vägfordon avsedda för boende Installationsanvisningar Specification for the installation
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14067-3:2003 Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels EESTI STANDARDIKESKUS EESTI
More informationDEUTSCHE NORM October Structural steel equal and unequal leg angles Part 1: Dimensions English version of DIN EN
DEUTSCHE NORM October 1998 Structural steel equal and unequal leg angles Part 1: Dimensions English version of DIN EN 10056-1 { EN 10056-1 ICS 77.140.70 Descriptors: Structural steel, angles, dimensions.
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12591:2000 Bitumen and bituminous binders - Specifications for paving grade bitumens Bitumen and bituminous binders - Specifications for paving grade bitumens EESTI STANDARDIKESKUS
More informationLaboratorieglas Byretter (ISO 385:2005)
SVENSK STANDARD SS-EN ISO 385:2005 Fastställd 2005-07-11 Utgåva 1 Laboratorieglas Byretter (ISO 385:2005) Laboratory glassware Burettes (ISO 385:2005) ICS 17.060; 71.040.20 Språk: engelska Publicerad:
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13149-1:2004 Public transport - Road vehicle scheduling and control systems - Part 1: WORLDFIP definition and application rules for onboard data transmission Public transport - Road
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12284:2003 Külmetussüsteemid ja soojuspumbad. Ventiilid. Nõuded, testimine ja markeerimine Refrigerating systems and heat pumps - Valves - Requirements, testing and marking EESTI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14367:2005 Backflow preventer with different non controllable pressure zones - Family C - Type A Non controllable backflow preventer with different pressure zones - Family C, type
More informationDEUTSCHE NORM June 2006 DIN EN { ICS Supersedes DIN EN : See start of validity
DEUTSCHE NORM June 2006 DIN EN 14399-6 { ICS 21.060.30 Supersedes DIN EN 14399-6:2005-06 See start of validity High-strength structural bolting assemblies for preloading Part 6: Plain chamfered washers
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14832:2005 Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids Petroleum and related products - Determination
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13452-1:2003 Railway applications - Braking - Mass transit brake systems - Part 1: Performance requirements Railway applications - Braking - Mass transit brake systems - Part 1: Performance
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15199-2:2006 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuel Petroleum products - Determination
More informationSVENSK STANDARD SS-EN 15490:2007. Etanol som blandningskomponent i bensin Bestämning av phe
SVENSK STANDARD SS-EN 15490:2007 Fastställd 2007-09-03 Utgåva 1 Etanol som blandningskomponent i bensin Bestämning av phe Ethanol as a blending component for petrol Determination of phe ICS 71.080.60;
More informationSkyddshandskar mot kemikalier och mikroorganismer
SVENSK STANDARD SS-EN 374-1:2004 Fastställd 2004-01-23 Utgåva 2 Skyddshandskar mot kemikalier och mikroorganismer Del 1: Terminologi och fordringar på prestanda Protective gloves against chemicals and
More informationRESILIENT AND LAMINATE FLOOR COVERINGS - CASTOR CHAIR TEST IRISH STANDARD I.S. EN 425:2002. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN 425:2002 ICS 97.150 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 RESILIENT AND LAMINATE FLOOR COVERINGS - CASTOR CHAIR TEST NSAI
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16793 January 2016 ICS 23.060.40; 13.220.99 English Version Guide for the selection, application and use of flame arresters Guide pour la sélection,
More informationProvläsningsexemplar / Preview SVENSK STANDARD SS-EN 14667:2006 Fastställd 2006-12-06 Utgåva 1 Surface active agents Determination of low boiling solvents in liquid formulations Gas chromatographic method
More informationINDUSTRIAL VALVES - ISOLATING VALVES FOR LNG - SPECIFICATION FOR SUITABILITY AND APPROPRIATE VERIFICATION TESTS IRISH STANDARD I.S.
IRISH STANDARD I.S. EN 12567:2000 ICS 23.060.01 National Standards Authority of Ireland Dublin 9 Ireland INDUSTRIAL VALVES - ISOLATING VALVES Tel: (01) 807 3800 Tel: (01) 807 3838 FOR LNG - SPECIFICATION
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 6245:2003 Naftasaadused. Tuha määramine Petroleum products - Determination of ash EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION CLC/TS 50591 SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION November 2013 ICS 45.060.10 English version Specification and verification of energy consumption for railway rolling
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13594:2002 Kaitsekindad professionaalsete mootorratturitele. Nõuded ja katsemeetodid Protective gloves for professional motorcycle riders - Requirements and test methods EESTI STANDARDIKESKUS
More informationPlastics Polyoxymethylene (POM) moulding and extrusion materials Part 1: Designation system and basis for specifications (ISO :2004)
SVENSK STANDARD SS-EN ISO 9988-1:2006 Fastställd 2006-04-12 Utgåva 1 Plast Sprutmassor av polyoxymetylen (POM) Del 1: Beteckningssystem och specifikationsgrund (ISO 9988-1:2004) Plastics Polyoxymethylene
More informationGarden equipment Powered lawnmowers Safety
SVENSK STANDARD SS-EN 836/A3:2004 Fastställd 2004-02-13 Utgåva 1 Trädgårdsmaskiner Motordrivna gräsklippare Maskinsäkerhet Garden equipment Powered lawnmowers Safety ICS 65.060.70 Språk: engelska Publicerad:
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15694:2009 Agricultural tractors - Passenger seat - Requirements and test procedures EESTI STANDARDI EESSÕNA Käesolev Eesti standard EVS-EN 15694:2009 sisaldab Euroopa standardi EN
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13535:2001 Fertilizers and liming materials - Classification Fertilizers and liming materials - Classification EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12312-11:2005 Aircraft ground support equipment - Specific requirements - Part 11: Container/Pallet dollies and loose load trailers Aircraft ground support equipment - Specific requirements
More informationPart 1: Specifications for pipes, fittings and the system English version of DIN EN
DEUTSCHE NORM December 1999 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure Unplasticized poly(vinyl chloride) (PVC-U) Part 1: Specifications
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12514-1:2000 Installations for oil supply systems for oil burners - Part 1: Safety requirements and tests - Parts, oil feed pumps, control and safety devices, supply tanks Installations
More informationDel 8: Krav på skyddsanordningar mot skadligt tryck. Shell boilers Part 8: Requirements for safeguards against excessive pressure
SVENSK STANDARD SS-EN 12953-8 Fastställd 2001-12-07 Utgåva 1 Eldrörspannor Del 8: Krav på skyddsanordningar mot skadligt tryck Shell boilers Part 8: Requirements for safeguards against excessive pressure
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1317-8 April 2012 ICS 13.200; 93.080.30 English Version Road restraint systems - Part 8: Motorcycle road restraint systems
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13652:2002 Soil improvers and growing media - Extraction of water soluble nutrients and elements Soil improvers and growing media - Extraction of water soluble nutrients and elements
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15367-3 January 2009 ICS 75.160.20; 75.200; 03.100.50 English Version Petroleum products - Guide for good housekeeping - Part 3: Prevention
More informationSkeppsteknik Framdrivningsaggregat för fartyg Del 1: Ordlista för propellrars geometri (ISO :2002)
SVENSK STANDARD SS- Fastställd 2004-03-05 Utgåva 1 Skeppsteknik Framdrivningsaggregat för fartyg Del 1: Ordlista för propellrars geometri (ISO 3715-1:2002) Ships and marine technology Propulsion plants
More informationSVENSK STANDARD SS-EN :2006. Offshore containers and associated lifting sets Part 2: Lifting sets Design, manufacture and marking
SVENSK STANDARD SS-EN 12079-2:2006 Fastställd 2006-04-28 Utgåva 1 Offshore containers and associated lifting sets Part 2: Lifting sets Design, manufacture and marking ICS 55.180.10 Språk: engelska Publicerad:
More informationÍST EN 81-20:2014 ICS: 91.14
ÍST EN 81-20:2014 Gildistaka 20.11.2014 ICS: 91.14 Öryggisreglur um smíði og ísetningu á lyftum - Lyftur til fólks- og vöruflutninga - Hluti 20: Fólkslyftur og fólks- og vörulyftur Safety rules for the
More informationGasflaskor Fyllningsförhållanden för batterifordon för acetylen
SVENSK STANDARD SS-EN 13720 Fastställd 2003-03-28 Utgåva 1 Gasflaskor Fyllningsförhållanden för batterifordon för acetylen Transportable gas cylinders Filling conditions for acetylene battery vehicles
More informationDEUTSCHE NORM July 1998
DEUTSCHE NORM July 1998 Non-destructive testing of steel forgings Part 3: Ultrasonic testing of ferritic or martensitic steel forgings English version of DIN EN 10228-3 { EN 10228-3 ICS 77.040.20; 77.140.85
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13016-2:2007 Liquid petroleum products - Vapour pressure - Part 2: Determination of absolute pressure (AVP) between 40 ºC and 100 ºC Liquid petroleum products - Vapour pressure -
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13802:2004 Railway applications - Suspension components - Hydraulic dampers Railway applications - Suspension components - Hydraulic dampers EESTI STANDARDIKESKUS EESTI STANDARDI
More informationUtrustning för hjulsport Inlines Säkerhetskrav och provningsmetoder. Roller sports equipment Inline-skates Safety requirements and test methods
SVENSK STANDARD SS-EN 13843 Fastställd 2003-02-21 Utgåva 1 Utrustning för hjulsport Inlines Säkerhetskrav och provningsmetoder Roller sports equipment Inline-skates Safety requirements and test methods
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13654-1:2002 Soil improvers and growing media - Determination of nitrogen - Part 1: Modified Kjeldahl method Soil improvers and growing media - Determination of nitrogen - Part 1:
More information