SOUTH AFRICAN NATIONAL STANDARD

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "SOUTH AFRICAN NATIONAL STANDARD"

Transcription

1 ISBN EN 413-1:2011 SOUTH AFRICAN NATIONAL STANDARD Masonry cement Part 1: Composition, specifications and conformity criteria This national standard is the identical implementation of EN 413-1:2011, and is adopted with the permission of CEN, rue de Stassart 36, B-1050 Brussels. WARNING This document references other documents normatively. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: Fax: SABS

2 EN 413-1:2011 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Committee SABS/TC 081/SC 01, Construction materials, products and test methods Cement, lime and concrete, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This document was published in June This document supersedes SANS :2004 (edition 2). This document is referenced in the Compulsory specification for cement, as published by Government Notice No. R. 544 (Government Gazette No ) of 6 July The preferred temperature of the air in the laboratories where tests are carried out in South Africa is 22 C to 25 C. SABS

3 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM Licensed exclusively to SABS. EN April 2011 ICS Supersedes EN 413-1:2004 English Version Masonry cement - Part 1: Composition, specifications and conformity criteria Ciment à maçonner - Partie 1: Composition, spécifications et critères de conformité Putz- und Mauerbinder - Teil 1: Zusammensetzung, Anforderungen und Konformitätskriterien This European Standard was approved by CEN on 10 March CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 413-1:2011: E

4 EN 413-1:2011 (E) Licensed exclusively to SABS. Contents page Foreword... 4 Introduction Scope... 6 Normative references... 6 Terms and definitions... 7 Notation... 8 Requirements... 8 General... 8 Constituents and composition... 8 Physical and mechanical requirements... 9 Fineness (sieve residue)... 9 Initial setting time... 9 Final setting time... 9 Soundness... 9 Fresh mortar requirements... 9 Compressive strength Chemical requirements Durability requirements Standard designation Conformity criteria General requirements Conformity criteria for physical, mechanical and chemical properties and evaluation procedure General Statistical conformity criteria Single result conformity criteria Conformity criteria for masonry cement composition Annex A (informative) Water-soluble hexavalent chromium Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive Bibliography Tables Table 1 Composition of masonry cements... 9 Table 2 Fresh mortar requirements given as characteristic values Table 3 Compressive strength requirements given as characteristic values Table 4 Chemical requirements given as characteristic values Table 5 Properties, test methods and minimum testing frequencies for the autocontrol testing by the manufacturer, and the statistical assessment procedure Table 6 Required values of P k and CR Table 7 Acceptability constant

5 EN 413-1:2011 (E) Table 8 Values of c A Table 9 Limit values for single results Table ZA.1 Harmonised clauses Table ZA.2 System of attestation of conformity Table ZA.3 Assignment of evaluation of conformity tasks for masonry cement under system

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-28107-6 EN 1008:2002 SOUTH AFRICAN NATIONAL STANDARD Mixing water for concrete Specification for sampling, testing and assessing the suitability of water, including water recovered from

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-30207-8 SOUTH AFRICAN NATIONAL STANDARD Chemicals used for treatment of water intended for human consumption Chlorine This national standard is the identical implementation of and is adopted

More information

Eurocode 3 Design of steel structures

Eurocode 3 Design of steel structures BRITISH STANDARD BS EN 1993-5:2007 Incorporating corrigendum May 2009 Eurocode 3 Design of steel structures Part 5: Piling ICS 91.010.30; 91.080.10 National foreword This British Standard is the UK implementation

More information

Eurocode 3 Design of steel structures

Eurocode 3 Design of steel structures BRITISH STANDARD BS EN 1993-3-2:2006 Eurocode 3 Design of steel structures Part 3-2: Towers, masts and chimneys Chimneys ICS 91.010.30; 91.060.40; 91.080.10 National foreword This British Standard is the

More information

DEUTSCHE NORM February 2005 DIN EN ISO 1514 { Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514

DEUTSCHE NORM February 2005 DIN EN ISO 1514 { Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514 DEUTSCHE NORM February 2005 DIN EN ISO 1514 { ICS 87.100 Supersedes September 1997 edition. Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514 Beschichtungsstoffe

More information

Eurocode 2 Design of concrete structures

Eurocode 2 Design of concrete structures BRITISH STANDARD BS EN 1992-3:2006 Eurocode 2 Design of concrete structures Part 3: Liquid retaining and containment structures The European Standard EN 1992-3:2006 has the status of a British Standard

More information

Eurocode 3 Design of steel structures

Eurocode 3 Design of steel structures BRITISH STANDARD BS EN 1993-1-5:2006 Incorporating corrigendum April 2009 Eurocode 3 Design of steel structures Part 1-5: Plated structural elements ICS 91.010.30; 91.080.10 National foreword This British

More information

Eurocode 3 Design of steel structures

Eurocode 3 Design of steel structures BRITISH STANDARD BS EN 1993-2:2006 Incorporating corrigendum July 2009 Eurocode 3 Design of steel structures Part 2: Steel bridges ICS 91.010.30; 91.080.10; 93.040 National foreword This British Standard

More information

Eurocode 8: Design of structures for earthquake resistance

Eurocode 8: Design of structures for earthquake resistance BRITISH STANDARD BS EN 1998-4:2006 Eurocode 8: Design of structures for earthquake resistance Part 4: Silos, tanks and pipelines The European Standard EN 1998-4:2006 has the status of a British Standard

More information

ILNAS-EN 15663:2017. Railway applications - Vehicle reference masses. Bahnanwendungen - Fahrzeugreferenzmassen

ILNAS-EN 15663:2017. Railway applications - Vehicle reference masses. Bahnanwendungen - Fahrzeugreferenzmassen Railway applications - Vehicle reference masses Bahnanwendungen - Fahrzeugreferenzmassen Applications ferroviaires - Masses de référence des véhicules 07/2017 National Foreword This European Standard EN

More information

DEUTSCHE NORM October Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887

DEUTSCHE NORM October Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887 DEUTSCHE NORM October 2003 Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887 { EN ISO 3887 ICS 77.040.99 Stahl Bestimmung der Entkohlungstiefe (ISO 3887

More information

Eurocode 3 Design of steel structures

Eurocode 3 Design of steel structures BRITISH STANDARD BS EN 1993-3-1:2006 Incorporating corrigendum July 2009 Eurocode 3 Design of steel structures Part 3-1: Towers, masts and chimneys Towers and masts ICS 91.010.30; 91.080.10 National foreword

More information

WATER-TUBE BOILERS AND AUXILIARY

WATER-TUBE BOILERS AND AUXILIARY IRISH STANDARD I.S. EN 12952-12:2003 ICS 13.060.25 27.040 WATER-TUBE BOILERS AND AUXILIARY National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 INSTALLATIONS -

More information

DEUTSCHE NORM June Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO : 2001)

DEUTSCHE NORM June Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO : 2001) DEUTSCHE NORM June 2002 Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO 1043-1 : 2001) English version of DIN EN ISO 1043-1 { EN ISO 1043-1 ICS 01.040.83;

More information

DEUTSCHE NORM DIN EN 10080

DEUTSCHE NORM DIN EN 10080 DEUTSCHE NORM DIN EN 10080 August 2005 { ICS 77.140.15; 77.140.60; 77.140.65 Supersedes DIN V ENV 10080, August 1995 edition, parts of DIN 488-1, September 1984 edition, DIN 488-2, DIN 488-4 and DIN 488-6,

More information

DEUTSCHE NORM January Fasteners Electroplated coatings (ISO 4042 : 1999) English version of DIN EN ISO 4042

DEUTSCHE NORM January Fasteners Electroplated coatings (ISO 4042 : 1999) English version of DIN EN ISO 4042 DEUTSCHE NORM January 2001 Fasteners Electroplated coatings (ISO 4042 : 1999) English version of DIN EN ISO 4042 { EN ISO 4042 ICS 21.060.01; 25.220.40 Verbindungselemente Galvanische Überzüge (ISO 4042

More information

DEUTSCHE NORM July 2004 DIN EN ISO 9038 { Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038

DEUTSCHE NORM July 2004 DIN EN ISO 9038 { Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038 DEUTSCHE NORM July 2004 DIN EN ISO 9038 { ICS 13.220.40; 87.040 Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038 Prüfung der Weiterbrennbarkeit von Flüssigkeiten

More information

Continuously hot-rolled strip and plate/sheet cut from wide strip of nonalloy and alloy steels - Tolerances on dimensions and shape

Continuously hot-rolled strip and plate/sheet cut from wide strip of nonalloy and alloy steels - Tolerances on dimensions and shape Irish Standard Continuously hot-rolled strip and plate/sheet cut from wide strip of nonalloy and alloy steels - Tolerances on dimensions and shape NSAI 2010 No copying without NSAI permission except as

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12642:2006 Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements Securing of cargo on road vehicles - Body structure of commercial vehicles

More information

COLD ROLLED STEEL SECTIONS -

COLD ROLLED STEEL SECTIONS - STANDARD I.S. EN 10162:2003 ICS 77.140.70 National Standards Authority of Ireland Dublin 9 Ireland COLD ROLLED STEEL SECTIONS - Tel: (01) 807 3800 Fax: (01) 807 3838 TECHNICAL DELIVERY CONDITIONS - DIMENSIONAL

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12592:2007 Bitumen and bituminous binders - Determination of solubility Bitumen and bituminous binders - Determination of solubility EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 284:2006 Transpordipakendid. Klassi C transpordipakendid. Mõõtmed ja üldnõuded Swap bodies - Non-stackable swap bodies of class C - Dimensions and general requirements EESTI STANDARDIKESKUS

More information

DEUTSCHE NORM May 2004 DIN EN ISO 4029 { Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029

DEUTSCHE NORM May 2004 DIN EN ISO 4029 { Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029 DEUTSCHE NORM May 2004 DIN EN ISO 4029 { ICS 21.060.10 Supersedes DIN 916, December 1980 edition. Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029 Gewindestifte

More information

DEUTSCHE NORM March Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016

DEUTSCHE NORM March Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016 DEUTSCHE NORM March 2001 Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016 { EN ISO 4016 ICS 21.060.10 Sechskantschrauben mit Schaft Produktklasse C (ISO 4016 : 1999)

More information

Eurocode 1 Actions on structures

Eurocode 1 Actions on structures BRITISH STANDARD Eurocode 1 Actions on structures BS EN 1991-1-3:2003 Incorporating corrigenda December 2004 and March 2009 Part 1-3: General actions Snow loads ICS 91.010.30 National foreword This British

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14432:2006 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Product discharge and air inlet valves Tanks for the transport of dangerous

More information

Eurocode 3 Design of steel structures

Eurocode 3 Design of steel structures BRITISH STANDARD BS EN 1993-1-6:2007 Incorporating corrigendum April 2009 Eurocode 3 Design of steel structures Part 1-6: Strength and Stability of Shell Structures ICS 91.010.30; 91.080.10 National foreword

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12120:2005 Chemicals used for treatment of water intended for human consumption - Sodium hydrogen sulfite Chemicals used for treatment of water intended for human consumption - Sodium

More information

DEUTSCHE NORM February 2003

DEUTSCHE NORM February 2003 DEUTSCHE NORM February 2003 Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylenediene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)- styrene (ACS) moulding and extrusion

More information

Provläsningsexemplar / Preview SVENSK STANDARD SS-EN 13577:2007 Fastställd 2007-04-16 Utgåva 1 Betong Kemiskt angrepp Bestämning av halt av aggressiv koldioxid i vatten Chemical attack on concrete Determination

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14895:2006 Bitumen and bituminous binders - Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders Bitumen and bituminous binders - Stabilisation

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12674-3:2004 Roll containers - Part 3: Test methods Roll containers - Part 3: Test methods EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard

More information

RESILIENT AND LAMINATE FLOOR COVERINGS - CASTOR CHAIR TEST IRISH STANDARD I.S. EN 425:2002. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann

RESILIENT AND LAMINATE FLOOR COVERINGS - CASTOR CHAIR TEST IRISH STANDARD I.S. EN 425:2002. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann IRISH STANDARD I.S. EN 425:2002 ICS 97.150 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 RESILIENT AND LAMINATE FLOOR COVERINGS - CASTOR CHAIR TEST NSAI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12284:2003 Külmetussüsteemid ja soojuspumbad. Ventiilid. Nõuded, testimine ja markeerimine Refrigerating systems and heat pumps - Valves - Requirements, testing and marking EESTI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14067-3:2003 Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels EESTI STANDARDIKESKUS EESTI

More information

BUILDING LIME - PART 2: TEST METHODS IRISH STANDARD I.S. EN 459-2:2002. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann

BUILDING LIME - PART 2: TEST METHODS IRISH STANDARD I.S. EN 459-2:2002. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann IRISH STANDARD I.S. EN 459-2:2002 ICS 91.100.10 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 BUILDING LIME - PART 2: TEST METHODS NSAI 2002 Údarás um Chaighdeáin

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15199-2:2006 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuel Petroleum products - Determination

More information

DEUTSCHE NORM June 2006 DIN EN { ICS Supersedes DIN EN : See start of validity

DEUTSCHE NORM June 2006 DIN EN { ICS Supersedes DIN EN : See start of validity DEUTSCHE NORM June 2006 DIN EN 14399-6 { ICS 21.060.30 Supersedes DIN EN 14399-6:2005-06 See start of validity High-strength structural bolting assemblies for preloading Part 6: Plain chamfered washers

More information

INDUSTRIAL VALVES - ISOLATING VALVES FOR LNG - SPECIFICATION FOR SUITABILITY AND APPROPRIATE VERIFICATION TESTS IRISH STANDARD I.S.

INDUSTRIAL VALVES - ISOLATING VALVES FOR LNG - SPECIFICATION FOR SUITABILITY AND APPROPRIATE VERIFICATION TESTS IRISH STANDARD I.S. IRISH STANDARD I.S. EN 12567:2000 ICS 23.060.01 National Standards Authority of Ireland Dublin 9 Ireland INDUSTRIAL VALVES - ISOLATING VALVES Tel: (01) 807 3800 Tel: (01) 807 3838 FOR LNG - SPECIFICATION

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13594:2002 Kaitsekindad professionaalsete mootorratturitele. Nõuded ja katsemeetodid Protective gloves for professional motorcycle riders - Requirements and test methods EESTI STANDARDIKESKUS

More information

Part 1: Specifications for pipes, fittings and the system English version of DIN EN

Part 1: Specifications for pipes, fittings and the system English version of DIN EN DEUTSCHE NORM December 1999 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure Unplasticized poly(vinyl chloride) (PVC-U) Part 1: Specifications

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12514-1:2000 Installations for oil supply systems for oil burners - Part 1: Safety requirements and tests - Parts, oil feed pumps, control and safety devices, supply tanks Installations

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15367-3 January 2009 ICS 75.160.20; 75.200; 03.100.50 English Version Petroleum products - Guide for good housekeeping - Part 3: Prevention

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13652:2002 Soil improvers and growing media - Extraction of water soluble nutrients and elements Soil improvers and growing media - Extraction of water soluble nutrients and elements

More information

Chemical disinfectants and antiseptics - Hygienic handwash - Test method and requirements (phase 2/step 2)

Chemical disinfectants and antiseptics - Hygienic handwash - Test method and requirements (phase 2/step 2) Irish Standard Chemical disinfectants and antiseptics - Hygienic handwash - Test method and requirements (phase 2/step 2) CEN 2013 No copying without NSAI permission except as permitted by copyright law.

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12255-6:2002 Wastewater treatment plants - Part 6: Activated sludge processes Wastewater treatment plants - Part 6: Activated sludge processes EESTI STANDARDIKESKUS EESTI STANDARDI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13802:2004 Railway applications - Suspension components - Hydraulic dampers Railway applications - Suspension components - Hydraulic dampers EESTI STANDARDIKESKUS EESTI STANDARDI

More information

DEUTSCHE NORM July 1998

DEUTSCHE NORM July 1998 DEUTSCHE NORM July 1998 Non-destructive testing of steel forgings Part 3: Ultrasonic testing of ferritic or martensitic steel forgings English version of DIN EN 10228-3 { EN 10228-3 ICS 77.040.20; 77.140.85

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12806:2003 Automotive liquefied petroleum gas components - Other than containers Automotive liquefied petroleum gas components - Other than containers EESTI STANDARDIKESKUS EESTI

More information

Utrustning för hjulsport Inlines Säkerhetskrav och provningsmetoder. Roller sports equipment Inline-skates Safety requirements and test methods

Utrustning för hjulsport Inlines Säkerhetskrav och provningsmetoder. Roller sports equipment Inline-skates Safety requirements and test methods SVENSK STANDARD SS-EN 13843 Fastställd 2003-02-21 Utgåva 1 Utrustning för hjulsport Inlines Säkerhetskrav och provningsmetoder Roller sports equipment Inline-skates Safety requirements and test methods

More information

CHEMICAL DISINFECTANTS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF VIRUCIDAL ACTIVITY AGAINST BACTERIOPHAGES OF

CHEMICAL DISINFECTANTS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF VIRUCIDAL ACTIVITY AGAINST BACTERIOPHAGES OF IRISH STANDARD I.S. EN 13610:2003 ICS 11.080.20 67.050 71.100.35 CHEMICAL DISINFECTANTS - QUANTITATIVE SUSPENSION TEST FOR National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel:

More information

METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2003) IRISH STANDARD I.S. EN ISO 18265:2003. Price Code

METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2003) IRISH STANDARD I.S. EN ISO 18265:2003. Price Code IRISH STANDARD I.S. EN ISO 18265:2003 ICS 77.040.01 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13654-1:2002 Soil improvers and growing media - Determination of nitrogen - Part 1: Modified Kjeldahl method Soil improvers and growing media - Determination of nitrogen - Part 1:

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 20483:2006 Cereals and pulses - Determination of the nitrogen content and calculation of the crude protein content - Kjeldahl method Cereals and pulses - Determination of the

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 50272-3:2003 Safety requirements for secondary batteries and battery installations - Part 3: Traction batteries Safety requirements for secondary batteries and battery installations

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12697-32:2003+A1:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor KONSOLIDEERITUD TEKST Bituminous

More information

SVENSK STANDARD SS-EN 15489:2007. Etanol som blandningskomponent i bensin Bestämning av vattenhalt Metod med Karl Fischer titrimetrisk coulometri

SVENSK STANDARD SS-EN 15489:2007. Etanol som blandningskomponent i bensin Bestämning av vattenhalt Metod med Karl Fischer titrimetrisk coulometri SVENSK STANDARD SS-EN 15489:2007 Fastställd 2007-09-03 Utgåva 1 Etanol som blandningskomponent i bensin Bestämning av vattenhalt Metod med Karl Fischer titrimetrisk coulometri Ethanol as a blending component

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 303-4:2001 Heating boilers. Part 4: Heating boilers with forced draught burners - Special requirements for boilers with forced draught oil burners with outputs up to 70 kw and a maximum

More information

Alcohol interlocks - Test methods and performance requirements -- Part 1: Instruments for drink-driving-offender programs

Alcohol interlocks - Test methods and performance requirements -- Part 1: Instruments for drink-driving-offender programs Irish Standard I.S. EN 50436-1:2014 Alcohol interlocks - Test methods and performance requirements -- Part 1: Instruments for drink-driving-offender programs CENELEC 2014 No copying without NSAI permission

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15210-1:2010 Tahked biokütused. Graanulite ja brikettide mehaanilise vastupidavuse määramine. Osa 1: Graanulid Solid biofuels - Determination of mechanical durability of pellets and

More information

Flödesscheman för processanläggningar Generella regler (ISO 10628:1997) Flow diagrams for process plants General rules (ISO 10628:1997)

Flödesscheman för processanläggningar Generella regler (ISO 10628:1997) Flow diagrams for process plants General rules (ISO 10628:1997) SVENSK STANDARD SS-EN ISO 10628 Fastställd 2003-04-04 Utgåva 1 Flödesscheman för processanläggningar Generella regler (ISO 10628:1997) Flow diagrams for process plants General rules (ISO 10628:1997) ICS

More information

December 2010 DIN EN 1555-5 D ICS 23.040.01; 91.140.40 Supersedes DIN EN 1555-5:2003-04 Plastics piping systems for the supply of gaseous fuels Polyethylene (PE) Part 5: Fitness for purpose of the system

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12952-9:2003 Veetorudega katlad ja abipaigaldised. Osa 9: Nõuded põletussüsteemidele pihustatud tahke kütusega töötava boileri puhul Water-tube boilers and auxiliary installations

More information

Steel forgings for pressure purposes Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels English version of DIN EN

Steel forgings for pressure purposes Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels English version of DIN EN DEUTSCHE NORM February 2000 Steel forgings for pressure purposes Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels English version of DIN EN 10222-5 { EN 10222-5 ICS 23.020,30; 77.140.80;

More information

Kemikalier för behandling av vatten för simbassänger Triklorisocyansyra

Kemikalier för behandling av vatten för simbassänger Triklorisocyansyra SVENSK STANDARD SS-EN 15032:2006 Fastställd 2006-07-13 Utgåva 1 Kemikalier för behandling av vatten för simbassänger Triklorisocyansyra Chemicals used for treatment of swimming pool water Trichloroisocyanuric

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12916:2006 Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection Petroleum

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 1772:2000 Surface active agents - Determination of wetting power by immersion Surface active agents - Determination of wetting power by immersion (ISO 022:10, modified) EESTI STANDARDIKESKUS

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14066:2003 Natural stone test methods - Determination of resistance to ageing by thermal shock Natural stone test methods - Determination of resistance to ageing by thermal shock

More information

SVENSK STANDARD SS-EN ISO :2010/A1:2016

SVENSK STANDARD SS-EN ISO :2010/A1:2016 SVENSK STANDARD SS-EN ISO 8362-1:2010/A1:2016 Fastställd/Approved: 2016-01-13 Publicerad/Published: 2016-01-28 Utgåva/Edition: 1 Språk/Language: engelska/english ICS: 11.040.20 Behållare för injektionsvätskor

More information

SVENSK STANDARD SS-EN :2014/A2:2016

SVENSK STANDARD SS-EN :2014/A2:2016 SVENSK STANDARD SS-EN 13445-3:2014/A2:2016 Fastställd/Approved: 2016-10-20 Publicerad/Published: 2016-10-20 Utgåva/Edition: 1 Språk/Language: engelska/english ICS: 23.020.30; 23.020.60 Tryckkärl (ej eldberörda)

More information

English version. Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test

English version. Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 12697-34 June 2004 ICS 93.080.20 English version Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test Mélanges bitumineux

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 867-4:2001 Non-biological systems for use in sterilizers - Part 4: Specification for indicators as an alternative to the Bowie and Dick test for the detection of steam penetration

More information

DEUTSCHE NORM June 2006 DIN EN { ICS ; Supersedes DIN EN : See start of validity

DEUTSCHE NORM June 2006 DIN EN { ICS ; Supersedes DIN EN : See start of validity DEUTSCHE NORM June 2006 DIN EN 14399-4 { ICS 21.060.10; 21.060.20 Supersedes DIN EN 14399-4:2005-06 See start of validity High-strength structural bolting assemblies for preloading Part 4: System HV Hexagon

More information

ICS Supersedes EN : A11:2009. English version

ICS Supersedes EN : A11:2009. English version EUROPEAN STANDARD EN 60745-2-3 NORME EUROPÉENNE EUROPÄISCHE NORM February 2011 ICS 25.140.20 Supersedes EN 60745-2-3:2007 + A11:2009 English version Hand-held motor-operated electric tools - Safety - Part

More information

This document is a preview generated by EVS

This document is a preview generated by EVS CEN WORKSHOP CWA 15375 August 2005 AGREEMENT ICS 47.020.30 English version Separators for marine residual fuel - Performance testing using specific test oil This CEN Workshop Agreement has been drafted

More information

Gasflaskor - Koniska gängor av typ 25E för anslutning av ventiler till gasflaskor - Del 2: Gängtolk

Gasflaskor - Koniska gängor av typ 25E för anslutning av ventiler till gasflaskor - Del 2: Gängtolk Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders - Part 2: Gauge inspection Gasflaskor - Koniska gängor av typ 25E för anslutning av ventiler till gasflaskor - Del

More information

http://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se Provläsningsexemplar / Preview SVENSK STANDARD SS-EN 15202:2006 Fastställd 2006-12-08 Utgåva 1 Utrustning och tillbehör

More information

SVENSK STANDARD SS-EN :2005

SVENSK STANDARD SS-EN :2005 SVENSK STANDARD SS-EN 14710-1:2005 Fastställd 2005-03-11 Utgåva 1 Brand och räddning Brandpumpar Centrifugalpumpar utan evakueringsanordning Del 1: Klassificering, allmänna krav och säkerhetskrav Fire-fighting

More information

Golvmaterial Halvhårda golv och laminatgolv Länkrullsprovning

Golvmaterial Halvhårda golv och laminatgolv Länkrullsprovning SVENSK STANDARD SS-EN 425 Fastställd 2002-10-04 Utgåva 2 Golvmaterial Halvhårda golv och laminatgolv Länkrullsprovning Resilient and laminate floor coverings Castor chair test ICS 97.150 Språk: engelska

More information

FE ISSN Seacocks and through-hull fittings. Part 2: Non-metallic

FE ISSN Seacocks and through-hull fittings. Part 2: Non-metallic FE117361 ISSN 0335-3931 European standard French standard NF EN ISO 9093-2 February 2003 Classification index: J 95-045-2 Small craft Seacocks and through-hull fittings Part 2: Non-metallic F : Petits

More information

Vattenförsörjning Manuella kulventiler av kopparlegering Provning och krav

Vattenförsörjning Manuella kulventiler av kopparlegering Provning och krav SVENSK STANDARD SS-EN 13828:2004 Fastställd 2004-04-08 Utgåva 1 Vattenförsörjning Manuella kulventiler av kopparlegering Provning och krav Building valves Manually operated copper alloy and stainless steel

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 3675:2006 Toornafta ja vedelad naftaproduktid. Laboratoorne tiheduse määramine. Areomeetriline meetod (ISO 3675:1998) Crude petroleum and liquid petroleum products - Laboratory

More information

Jordförbättringsmedel och odlingssubstrat Bestämning av kväve Del 1: Modifierad Kjeldahlmetod

Jordförbättringsmedel och odlingssubstrat Bestämning av kväve Del 1: Modifierad Kjeldahlmetod SVENSK STANDARD SS-EN 13654-1 Fastställd 2002-01-11 Utgåva 1 Jordförbättringsmedel och odlingssubstrat Bestämning av kväve Del 1: Modifierad Kjeldahlmetod Soil improvers and growing media Determination

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13012:2012 Bensiinijaamad. Kütusetankurites kasutatavate automaatpihustite valmistamine ja jõudlus Petrol filling stations - Construction and performance of automatic nozzles for

More information

http://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se Provläsningsexemplar / Preview SVENSK STANDARD SS-EN ISO 20483:2006 Fastställd 2006-11-10 Utgåva 1 Cereals and

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16514 June 2013 ICS 75.160.20 English Version Automotive fuels - Unleaded petrol containing more than 3,7 % (m/m) oxygen - Roadmap, test methods,

More information

Geoteknisk undersökning och provning Fältprovning Del 3: SPT-försök (ISO :2005)

Geoteknisk undersökning och provning Fältprovning Del 3: SPT-försök (ISO :2005) SVENSK STANDARD SS-EN ISO 22476-3:2005 Fastställd 2005-01-28 Utgåva 1 Geoteknisk undersökning och provning Fältprovning Del 3: SPT-försök (ISO 22476-3:2005) Geotechnical investigation and testing Field

More information

ACEA Report. Vehicles in use Europe 2017

ACEA Report. Vehicles in use Europe 2017 ACEA Report Vehicles in use Europe 2017 TABLE OF CONTENTS Summary... 2 Vehicles in use in Europe... 3 Passenger cars... 3 Light commercial vehicles... 4 Medium and heavy commercial vehicles... 5 Buses...

More information

Cold formed welded structural hollow sections of non-alloy and fine grain steels

Cold formed welded structural hollow sections of non-alloy and fine grain steels BRITISH STANDARD BS EN 10219-2:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels Part 2: Tolerances, dimensions and sectional properties The European Standard EN 10219-2:2006

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 16321-1:2013 Petrol vapour recovery during refuelling of motor vehicles at service stations - Part 1: Test methods for the type approval efficiency assessment of petrol vapour recovery

More information

NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE EUROPEAN UNION 1 Q1 2015

NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE EUROPEAN UNION 1 Q1 2015 NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE Q1 2015 ALTERNATIVE FUEL VEHICLE registrations: +28.8% in in first quarter In the first quarter of 2015, total alternative fuel vehicle (AFV) registrations

More information

NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE EUROPEAN UNION 1 Q2 2015

NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE EUROPEAN UNION 1 Q2 2015 NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE Q2 2015 New alternative fuel vehicle (AFV) registrations in the EU by engine type Q2 2014 Q2 2015 Thousand units 70 60 50 40 30 20 10 0 EVs HEVs AFVs other

More information

LICENCE. for. Click on the red box above to activate the Licence Agreement scroll bar.

LICENCE. for. Click on the red box above to activate the Licence Agreement scroll bar. LICENCE for Licensee: Date: Click on the red box above to activate the Licence Agreement scroll bar. See publications covering the same Subject Area Subscribe to our Free Newsletters about Australian Standards

More information

Structural steel equal and unequal leg

Structural steel equal and unequal leg BRITISH STANDARD BS EN 10056-1:1999 The European Standard has the status of a British Standard ICS 77.140.70 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Structural steel equal

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14227-5:2013 Hüdrauliliselt seotud segud. Spetsifikatsioonid. Osa 5: Hüdraulilise teesideaine abil seotud teralised segud Hydraulically bound mixtures - Specifications - Part 5: Hydraulic

More information

NEW PASSENGER CARS BY FUEL TYPE IN THE EUROPEAN UNION 1 Quarter

NEW PASSENGER CARS BY FUEL TYPE IN THE EUROPEAN UNION 1 Quarter PRESS EMBARGO: NEW PASSENGER CARS BY FUEL TYPE IN THE EUROPEAN UNION 1 Quarter 1 2018 Next press release: Thursday 6 September 2018 1 Data for Croatia, Cyprus, Luxembourg and Malta is not available Page

More information

NEW PASSENGER CARS BY FUEL TYPE IN THE EUROPEAN UNION 1 Quarter

NEW PASSENGER CARS BY FUEL TYPE IN THE EUROPEAN UNION 1 Quarter PRESS EMBARGO: NEW PASSENGER CARS BY FUEL TYPE IN THE EUROPEAN UNION 1 Quarter 1 2018 Next press release: Thursday 6 September 2018 1 Data for Croatia, Cyprus, Luxembourg and Malta is not available Page

More information

SVENSK STANDARD SS-EN 12571

SVENSK STANDARD SS-EN 12571 SVENSK STANDARD SS-EN 12571 Handläggande organ Fastställd Utgåva Sida Standardiseringsgruppen STG 2000-01-21 1 1 (1+9) Copyright SIS. Reproduction in any form without permission is prohibited. Materials

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique EESTI STANDARDI EESSÕNA Käesolev

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 1439:2017 LPG equipment and accessories - Procedure for checking transportable refillable LPG cylinders before, during and after filling EVS-EN 1439:2017 EESTI STANDARDI EESSÕNA NATIONAL

More information