Locking Style. SI-LS42 Locking Style Switches. SI-LS42 Safety Switches, 42 mm - Spring Lock and Solenoid Unlock. Kits. Contact Config.

Transcription

1 Locking Style Spring or Solenoid Locking Two locking mechanisms are available: spring lock with energized solenoid release and energized solenoid lock with spring release Rigid and flexible in-line actuators are available head can be rotated in 9º increments to eight possible actuator positions: four vertical and four horizontal Two models are available, based on voltage Design meets positive opening requirements for safety interlocks (IEC ) Insulated device on all models with plastic housing (IEC ) Protective earth terminals on all metal models (IEC ) Inspection Controllers & Two-Hand Control Interlock SI-LS42 Locking Style ACCESSORIES PAGE online SI-LS42 Models (shown with rigid in-line actuator) AUTOCAD, STEP, IGES & PDF Replacement actuators for safety interlock switches (page 623) SI-LS42, 42 - Spring Lock and Solenoid Unlock Kits Type Interlock Kit Model * Contact(s) Solenoid Voltage Contact Config. & Switch Diagram SI-LS42DSG SI-LS42WSG SI-LS42DMSG SI-LS42WMSG : V ac/ 23V ac Solenoid SI-LS42DSG SI-LS42DMSGF : SD23 (Page 621) SI-LS42WSG SI-LS42WMSGF V ac/ 23V ac More on next page Multi-Directional NC = Normally Contact, NO = Normally Contact * A kit contains an interlock and actuator. Individual interlocks (without actuator) are for replacement purposes only. Contact factory for integral quick-disconnect (QD) and pigtail QD options. Call for more information

2 SI-LS42, 42 - Spring Lock and Solenoid Unlock Kits Type Interlock Kit Model * Contact(s) (cont d) Solenoid Voltage Contact Config. & Switch Diagram MACHINE SAFETY SI-LS42DSH SI-LS42WSH SI-LS42DMSH SI-LS42WMSH : 2 NC V ac/ 23V ac Solenoid SI-LS42DSH SI-LS42DMSHF : SI-LS42WSH SI-LS42WMSHF V ac/ 23V ac SD24 (Page 621) ACCESSORIES PAGE 623 SI-LS42DSI SI-LS42WSI SI-LS42DMSI SI-LS42WMSI : 2 NC & 1 NO V ac/ 23V ac Solenoid SI-LS42DSI SI-LS42DMSIF Contact: 1 NC SD25 SI-LS42WSI SI-LS42WMSIF V ac/ 23V ac SI-LS42DSJ SI-LS42DSJ SI-LS42DMSJ SI-LS42DMSJF : 3 NC Solenoid Contact: 1 NC SD26 Multi-Directional NC = Normally Contact, NO = Normally Contact * A kit contains an interlock and actuator. Individual interlocks (without actuator) are for replacement purposes only. Contact factory for integral quick-disconnect (QD) and pigtail QD options. 614 More information online at bannerengineering.com

3 SI-LS42, 42 - Solenoid Lock and Spring Unlock Kits Type Interlock Kit Model * SI-LS42DMG SI-LS42WMG SI-LS42DMMG SI-LS42WMMG Contact(s) : Solenoid Voltage V ac/ 23V ac Solenoid SI-LS42DMG SI-LS42DMMGF : SI-LS42WMG SI-LS42DMH SI-LS42WMH SI-LS42WMMGF SI-LS42DMMH SI-LS42WMMH : 2 NC V ac/ 23V ac V ac/ 23V ac Solenoid SI-LS42DMH SI-LS42DMMHF : Contact Config. & Switch Diagram SD23 (Page 621 SD24 (Page 621) Inspection Controllers & Two-Hand Control Interlock ACCESSORIES PAGE 623 SI-LS42WMH SI-LS42DMI SI-LS42WMI SI-LS42WMMHF SI-LS42DMMI SI-LS42WMMI : 2 NC & 1 NO V ac/ 23V ac V ac/ 23V ac Solenoid SI-LS42DMI SI-LS42DMMIF Contact: 1 NC SD25 SI-LS42WMI SI-LS42WMMIF V ac/ 23V ac SI-LS42DMJ SI-LS42DMJ SI-LS42DMMJ SI-LS42DMMJF : 3 NC Solenoid Contact: 1 NC SD26 Multi-Directional NC = Normally Contact, NO = Normally Contact * A kit contains an interlock and actuator. Individual interlocks (without actuator) are for replacement purposes only. Contact factory for integral quick-disconnect (QD) and pigtail QD options. Call for more information

4 SI-QM1 Locking Style MACHINE SAFETY online 6. AUTOCAD, STEP, IGES & PDF ACCESSORIES PAGE Replacement actuators for safety interlock switches (page 623) SI-QM1 Models (shown with rigid in-line actuator) SI-QM1, 1 - Spring Lock and Solenoid Unlock Kits Type Interlock Kit Model* Contact(s) Solenoid Voltage Contact Config. & Switch Diagram SI-QM1DSG SI-QM1DMSG Switching : 24V dc Solenoid : SI-QM1ASG SI-QM1AMSG 12V ac SI-QM1DSH SI-QM1DMSH Switching : 2 NC Solenoid : 24V dc SD27 SD28 SI-QM1, 1 - Solenoid Lock and Spring Unlock Kits Type Interlock Kit Model* Contact(s) Solenoid Voltage Contact Config. & Switch Diagram SI-QM1DMG SI-QM1DMMG Switching : 24V dc Solenoid SI-QM1AMG SI-QM1AMMG : 12V ac SD27 Multi-Directional NC = Normally Contact, NO = Normally Contact * A kit contains an interlock and actuator. Individual interlocks (without actuator) are for replacement purposes only. Contact factory for integral quick-disconnect (QD) and pigtail QD options. 616 More information online at bannerengineering.com

5 Locking Style Specifications Contact Rating 25V ac max. 2.5 kv max. transient tolerance NEMA A3 P3 European Rating Utilization categories: AC15 and DC13 (IEC ) with 1 & 2 contact pairs: U i = 25V ac SI-LS42 models: I th = 2.5 A SI-QM1 models: I th = 1 A 4-6 Hz U e V I e /AC-15 A I e /DC-13 A Inspection Contact Material Solenoid Power Consumption Maximum Speed Mechanical Life Minimum Engagement Radius Actuation Extraction Force Short Circuit Protection Wire Connections Silver-nickel alloy SI-LS42 models: 1.1 VA / Inrush 12 VA (.2 sec) SI-QM1 models: 5.2 W 1.5 m/second 1 million operations Rigid actuator: 4 Flexible actuator: 15 SI-LS42 models: 2 N when locked SI-QM1 models: 1 N when locked 6 amp Slow Blow, 1 amp Fast Blow. Recoended external fusing or overload protection. SI-LS42 models: 1 cage clamp elements 1.5 stranded max. / 16 AWG Controllers & Two-Hand Control Interlock Cable Entry Construction Environmental Rating Operating Conditions Weight Application Notes Certifications SI-QM1 models: Screw terminals with pressure plates accept the following wire sizes 16 AWG (1.5 2 ) max. solid; 14 AWG (2.5 2 ) max. stranded, 18 AWG (1 2 ) when using all terminals M2 x 1.5 threaded entrance Adapter supplied to convert M2 x 1.5 to ½" - 14 NPT threaded entrance SI-LS42 models: Glass fiber-reinforced polyamide thermoplastic housing; UL 94-V rating SI-QM1 models: Aluminum die cast IP67 Temperature: SI-LS42 models: -3 to +7 C SI-QM1 models: -3 to +6 C SI-LS42 models:.3 kg SI-QM1 models:.81 kg When rotating the actuator head, the actuator MUST BE FULLY ENGAGED. When using a model with solenoid locking, the lock mechanism will disengage upon solenoid power failure. and s SI-LS42 models: SD23, SD24, SD25 & SD26 (pp ) SI-QM1 models: SD27 and SD28 (p. 622) Call for more information

6 Contact/s SD1 - SI-HG63 Series SD2 - SI-HG8 Series MACHINE SAFETY rd/bu gn rd rd/bu Guard Guard rd/bk rd/ye rd/wh rd/bk 9 9 Non- Operating Angle Operating Angle 4 Guard 3 2 Guard Operating Angle gn rd/ye rd 12 rd/wh Page Page 6 SD3 - SI-LS31HGD Series SD4 - SI-LS31HGE Series Lever in Normal Position Lever in Normal Position ±5 ±8 ±1 ±5 ±8 Lever Rotated ±9 Lever Rotated ± Page 61 Page 61 SD5 - SI-LS31HGRD Series SD6 - SI-LS31HGRE Series Lever in Normal Position Lever in Normal Position Lever Rotated Lever Rotated Page 61 Page 61 More on next page 618 More information online at bannerengineering.com

7 Contact/s SD7 - SI-LS31HGLD Series Lever in Normal Position SD8 - SI-LS31HGLE Series Lever in Normal Position Inspection Lever Rotated Lever Rotated Controllers & º Page 61 Page 61 Two-Hand Control Interlock SD9 - SI-LS31RTD Series SD1 - SI-LS31RTE Series Axle in Home Position Axle in Home Position /36 Axle Rotated 45 > /36 Axle Rotated 45 > Page Page 62 SD - SI-LS1 Series SD12 - SI-LS83..D Series Page 65 Call for more information Page 65 More on next page

8 Contact/s SD13 - SI-LS83..E Series SD14 - SI-QS75 Series MACHINE SAFETY Page 65 Page 66 SD15 - SI-QS9MD Series SD16 - SI-QS9ME Series Page 66 Page 66 SD17 - SI-QS9MF Series SD18 - SI-LM4MKHD Series Page 66 4 Page 61 More on next page 62 More information online at bannerengineering.com

9 Contact/s SD19 - SI-LM4MKHE Series SD2 - SI-LM4MKHF Series Inspection Page * 1 of movement will open contact Page 61 Controllers & Two-Hand Control Interlock SD21 - SI-LM4MKVD Series SD22 - SI-LM4MKVE Series 1* Page 61 Page 61 SD23 - SI-LS42..MSG/MMG Series SD24 - SI-LS42..MSH/MMH Series & Locked Solenoid & Locked Solenoid & Unlocked Solenoid Page 613 & Unlocked Solenoid Call for more information Page 613 More on next page

10 Contact/s SD25 - SI-LS42..MSI/MMI Series SD26 - SI-LS42..MSJ/MMJ Series MACHINE SAFETY & Locked Solenoid & Unlocked Solenoid & Locked Solenoid & Unlocked Solenoid Page Page 613 SD27 - SI-QM1..MSG/MMG Series SD28 - SI-QM1..DMSH Series & Locked Solenoid & Locked Solenoid () 1 (.39) (.43) 12 (.47) & Unlocked Solenoid 41 & Unlocked Solenoid 41 (1.61) (in) Page 616 Page More information online at bannerengineering.com

11 Interlock Replacement Parts Used In Description Model* SI-LM4MKH..D kits SI-LM4KHD SI-LM4MKH..E kits SI-LM4KHE SI-LM4MKH..F kits SI-LM4KHF SI-LM4MKVD kit SI-LM4KVD SI-LM4MKVE kit SI-LM4KVE SI-LS42DMSG.. kits SI-LS42DSG SI-LS42WMSG.. kits SI-LS42WSG SI-LS42DMSH.. kits SI-LS42DSH SI-LS42WMSH.. kits SI-LS42WSH SI-LS42DMSI.. kits SI-LS42DSI Inspection Controllers & Two-Hand Control Interlock SI-LS42WMSI.. kits SI-LS42WSI SI-LS42DMSJ.. kits SI-LS42DSJ SI-LS42DMMG.. kits SI-LS42DMG SI-LS42WMMG.. kits SI-LS42DMMH.. kits SI-LS42WMMH.. kits SI-LS42DMMI.. kits Individual Interlock (without actuator) SI-LS42WMG SI-LS42DMH SI-LS42WMH SI-LS42DMI SI-LS42WMMI.. kits SI-LS42WMI SI-LS42DMMJ.. kits SI-LS42DMJ SI-LS1..F kits SI-LS1F SI-LS83..D kits SI-LS83D SI-LS83..E kits SI-LS83E SI-QM1DMSG kit SI-QM1DSG SI-QM1AMSG kit SI-QM1ASG SI-QM1DMMG kit SI-QM1DMG SI-QM1AMMG kit SI-QM1AMG SI-QS75..C kits SI-QS75C SI-QS9..D kits SI-QS9D SI-QS9..E kits SI-QS9E SI-QS9..F kits SI-QS9F * Kits with one safety interlock switch and an actuator are available (see pp ). Call for more information

12 Replacement s Parts for Interlock Description Used With Model MACHINE SAFETY Flexible in-line, trumpet-style, metal actuator used for doors or covers where alignment is difficult to maintain. Flexes in all directions. Minimum engagement radius for hinged closures is 15. SI-LM4MKV SI-QM-9A Rigid in-line metal actuator used for doors or covers. Slide-bolt design for use in heavy-duty applications where alignment is difficult to maintain. SI-LM4MKH SI-LS42 SI-QM1 SI-QM-SB Flexible in-line metal actuator used for doors or covers where alignment is difficult to maintain. Flexes in all directions. Minimum engagement radius for hinged closures is 15. SI-LM4MKH SI-LS42 SI-QM1 Rigid in-line metal actuator used for doors or covers with accurate alignment, such as sliding doors. Minimum engagement radius for hinged closures is 4. SI-LM4MKH SI-LS42 SI-QM1 High-extraction-force adapter for particularly heavy or large doors. Adjustable from 5 to 1 Newtons (force). Used only for switches with in-line actuator SI-QS-SSA. SI-QS75 SI-QS9 SI-QS-1 More on next page 624 More information online at bannerengineering.com

13 Replacement s Parts for Interlock (cont d) Description Used With Model Inspection Rigid in-line metal (die-cast steel) actuator for doors or covers with a radius of 15 or greater. SI-QS75 (high-force) SI-QS9 (high-force) SI-QS-SSA Controllers & Rigid in-line metal (stamped stainless steel) actuator used for doors or covers with accurate alignment, such as sliding doors. Minimum engagement radius for hinged closures is 15. SI-LS83 SI-LS1 SI-QS-SSA-2 Two-Hand Control Interlock Rigid in-line metal (stamped stainless steel) actuator used for doors or covers with accurate alignment, such as sliding doors. Right-angle mounting flange. Minimum engagement radius for hinged closures is 15. SI-LS83 SI-LS1 SI-QS-SSA-3 Rigid in-line metal (stamped stainless steel) actuator for doors or covers with a radius of 15 or greater. SI-QS75 SI-QS9 SI-QS-SSA-4 Flexible in-line metal (die-cast steel) actuator for hinged doors with a radius of 5 or greater. Flexes in all directions. Minimum engagement radius for hinged closures is 15. SI-LS83 SI-LS1 SI-QS75 SI-QS9 SI-QS-SSU Replacement terminal cover SI-LS42 SI-LS42-COVER Tamper Proof Screw (One way) SI-LS42 SI-LS42-SCREW OW Call for more information