SOUTHWEST OILFIELD PRODUCTS, INC.
|
|
|
- Theodore Anthony Ford
- 5 years ago
- Views:
Transcription
1 SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8487A FLUID END FOR OILWELL A-1100-PT / A-850-PT PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 ½ 5 5 ¼ 5 ½ 5 ¾ 6 6 ¼ 6 ½ 6 ¾ 7 7 ¼ 7 ½ A-1100-PT MUD PUMP PERFORMANCE CHART MAX-P.S.I G.P.S A-850-PT MAX-P.S.I G.P.S NOTE: I.H.P.= INPUT HORSE POWER S.P.M.= STROKE PER MINUTE P.S.I.= POUNDS PER SQUARE INCH G.P.R.= GALLONS PER REVOLUTION *MAX P.S.I. CALCULATIONS DO NOT EXCEED MAXIMUM FLUID END PRESSURE RATINGS BASED ON 100% VOLUMETRIC EFFICIENCY AND 90% MECHANICAL EFFICIENCY V:\5000 psi Catalogs Triplex\Oilwell A-1100-PT A-850-PT\8487A_Oilwell_A-1100-PT_A-850-PT.pdf REV. A 6/2/2015
2
3 FLUID END TYPE MODEL OF PUMP SIZE OF PUMP SOUTHWEST 5000 P.S.I. A-1100-PT/A-850-PT 7 ½ / 6 ½ X 10 ITEM NO. PART NO. DESCRIPTION QTY. REQ D 8487A FLUID END ASSEMBLY: (CONSIST OF ITEMS 3,4,16,17,18,19, 20,21,22,23, 24,25,26,27,28, 29,32,33,34, 35,36,39,47) YXX LINER (REFER TO GUIDE TO ORDERING CHART FOR TYPE (Y) AND FOR SIZE (XX)) XX LINER SEAL (REFER TO GUIDE TO ORDERING CHART FOR TYPE (Y) AND SIZE (XX)) WEARPLATE WEARPLATE SEAL 3 5 XX-BYY PISTON (REFER TO GUIDE TO ORDERING CHART FOR TYPE (Y) AND SIZE (XX)) 3 5A 2932 PISTON BUSHING (FROM 1 5/8 TO 1 ½ STRAIGHT BORE) PISTON O-RING HW25 PISTON ROD (WITH ELASTIC STOP NUT) 3 8 API-4ESN PISTON ROD ELASTIC STOP NUT W2 PISTON ROD CONNECTING STUD HW1 SUB ROD CW ROD CLAMP (CONSIST OF 11A, 11B, 11C) 3 11A 1200H30 HOSE (1/2 X 30 WITH ½ MALE X 3/8 MALE CONNECTIONS) 3 11B SPRAY PIPE 3 11C ROD CLAMP BOLT (5/8-6 GRADE 8 BOLT WITH LOCK NUT AND WASHER) G90 PONY ROD 3 13 SEE PAGE VALVE 6 14 SEE PAGE VALVE INSERT (IF REQUIRED) 6 15 SEE PAGE VALVE SPRING 6 16 SEE PAGE VALVE SEAT 6 SWTM1700 HYDRAULIC SEAT PULLER KIT COMPLETE (REFER TO TOOLS PAGE OF CATALOG FOR DETAILS) A SOUTHWEST HP QUICK-CHANGE VALVE COVER ASSEMBLY (CONSIST OF ITEMS 16-23) THREADED FLANGE SCREW GLAND A PLUG (COMPLETE WITH VALVE GUIDE, SCREWS, AND BUSHING) 6 20 P129 HP VALVE COVER PLUG SEAL (P129U URETHANE SEAL AVAILABLE) R VALVE GUIDE (COMPLETE WITH BUSHING #4700I) I VALVE GUIDE BUSHING (4700IU URETHANE AVAILABLE) VALVE GUIDE SCREW VALVE COVER STUD (WITH SW PART# HHN /4-7 HEAVY HEX NUT) POWER END STUD (WITH SW PART# HHN /4-8 HEAVY HEX NUT) 12
4 FLUID END TYPE MODEL OF PUMP SIZE OF PUMP SOUTHWEST 5000 P.S.I. A-1100-PT/A-850-PT 7 ½ / 6 ½ X 10 ITEM NO. PART NO. DESCRIPTION LINER RETAINER FERRY HEAD CAP SCREW LINER RETAINER FLANGE LINER RETAINER NUT 3 28A LINER RETAINER SET SCREW SUCTION MODULE STUD (WITH SW PART# HHN /2-8 HEAVY HEX NUT) SUCTION MANIFOLD CAP SCREW SUCTION MANIFOLD SUCTION MANIFOLD GASKET S SUCTION MODULE D DISCHARGE MODULE DOWEL PIN MODULE GASKET A DISCHARGE MANIFOLD DISCHARGE MANIFOLD GASKET DISCHARGE MANIFOLD STUD (WITH SW PART# HHN /8-8 HEAVY HEX NUT) 12 QTY. REQ D PONY ROD SEAL PONY ROD BAFFLE
5 SOUTHWEST 5000 PSI A-1100-PT/A-850-PT GUIDE TO ORDERING PISTONS LINERS LINER GASKET SIZE FAIL-SAFE DUAL-DURO BLACK CAT GRAYLOY ZIRCONIA RUBBER URETHANE 4" 76BFS 76BDD 76BBC 6391G ZIR U 4 1/4" 77BFS 77BDD 77BBC 6391G U 4 1/2" 78BFS 78BDD 78BBC 6391G ZIR U 4 3/4" 79BFS 79BDD 79BBC 6391G U 5" 81BFS 81BDD 81BBC 6391G1 6391ZIR U 5 1/4" 82BFS 82BDD 82BBC 6391G U 5 1/2" 83BFS 83BDD 83BBC 6391G3 6391ZIR U 5 3/4" 84BFS 84BDD 84BBC 6391G U 6" 85BFS 85BDD 85BBC 6391G5 6391ZIR U 6 1/4" 86BFS 86BDD 86BBC 6391G U 6 1/2" 87BFS 87BDD 87BBC 6391G7 6391ZIR U 6 3/4" 88BFS 88BDD 88BBC 6391G U 7" 89BFS 89BDD 89BBC 6391G9 6391ZIR U 7 1/4" 91BFS 91BDD 91BBC N/A U 7 1/2" 92BFS 92BDD 92BBC N/A U NOTE: DUAL-DURO AND GRAYLOY ARE REGISTERED TRADEMARKS OF SOUTHWEST OILFIELD PRODUCTS.
6 TYPE SOUTHWEST (Full Open) FULL OPEN-ROUGHNECK FULL OPEN-ROUGHNECK (High Temp) FULL OPEN-ROUGHNECK (w/replaceable Urethane Insert) 3 WEB DOUBLE ANGLE O-RING 3 WEB (High Temp) 3 WEB STANDARD PLATE 4 WEB 4 WEB (High Temp) VALVES & SEATS A-1100-PT/A-850-PT VALVE INSERT SPRING STAINLESS PULLER HEAD SEAT PULLER HEAD SPRING STYLE 777-8B N/A 941 N/A SWTM4250 SPLIT JAW SWND-7V2 N/A SW L N/A SWND-7S1 SWTM40-SN SPLIT JAW SWND-7PH PANCAKE SWND-7V2HC N/A SW L N/A SWND-7S1 SWTM40-SN SPLIT JAW SWND-7PH PANCAKE SWND-7V1 SWND-7I SW L N/A SWND-7S1 SWTM40-SN SPLIT JAW SWND-7PH PANCAKE SWR SWR SWR SWR SWR SWTM3-7T SWR SWR SWR SWR SWR SWTM3-7T 3 J HOOK SWR SWR SWR SWR SWR SWTM3-7T SWU5C-EEF SWUDD-7B SW N/A SW7DD-B1 SWTM4-7 SWU5C-EEFHT SWUDD-7BHT SW N/A SW7DD-B1 SWTM4-7 4 J HOOK PANCAKE SPLIT JAW 3 J HOOK 4 J HOOK
7 TORQUE SPECIFICATIONS FOR 8487A SOUTHWEST FLUID END ASSEMBLY OILWELL A-1100-PT / A-850-PT 5000 P.S.I. TORQUE TYPE (EXPRESSED IN FOOT-POUNDS) PART NUMBER DESCRIPTION COPPERCOTE MOLY GREASE API-4 ESN PISTON ROD NUT NO MORE THAN ONE MAN ON A 3' WRENCH/CHEATER COMBINATION BOLT 150 MAXIMUM 150 MAXIMUM VALVE COVER STUD POWER END STUD LINER RETAINER FLANGE SUCTION MODULE STUD SUCTION MANIFOLD CAP SCREW DISCHARGE MANIFOLD STUD
8 SOUTHWEST 8487A FLUID END FOR OILWELL A-1100-PT/A-850-PT REVISION SUMMARY REVISION DATE REASON OF CHANGE REV. A 6/01/15 UPDATED TORQUE SPECIFICATION PAGE Southwest Oilfield Products Wallisville Road, Houston, TX Office
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8482-25A FLUID END FOR NATIONAL 14-P-220 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8488-1A FLUID END FOR OILWELL A-1700-PT/A-1400-PT MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE FLUID END FOR OILWELL HD-1700-PT/HD-1400-PT MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8429-A FLUID END FOR BREWSTER B-1600-T / B-1300-T MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE MODEL I.H.P. S.P.M. LENGTH 4
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8432-A FLUID END FOR EWECO E-2200 PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 5 5 ½ 6 6 ½ 7 7 ½ 8 8 ½
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8407-7A FLUID END FOR IDECO T-1600 / T-1300 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE FLUID END FOR NATIONAL 14-P-220 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8477A FLUID END FOR GARDNER DENVER PZ-11/PZ-10 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8412A FLUID END FOR IDECO T-800 PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 ½ 5 5 ¼ 5 ½ 5 ¾ 6 6 ¼
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8404A FLUID END FOR BOMCO F-1600 / F-1300 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8482-A FLUID END FOR NATIONAL 14-P-220 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8429-7A FLUID END FOR BREWSTER B-1100-T / B-1000-T MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE MODEL I.H.P. S.P.M. LENGTH 4
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE FLUID END FOR WEATHERFORD MP-10 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8422A FLUID END FOR EMSCO F-1000 PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 1/2 5 5 ¼ 5 ½ 5 ¾ 6 6
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE 8475-5 FLUID END FOR GARDNER DENVER PZ-9 (PZJ) PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 1/2 5 5
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE 8475-5 FLUID END FOR GARDNER DENVER PZ-8 PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 1/2 5 5 ¼ 5 ½
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE FLUID END FOR BOMCO F-1600 / F-1300 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8476-25A FLUID END FOR NATIONAL 12-P-160 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8477-25A FLUID END FOR GARDNER DENVER PZ-11/PZ-10 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8490-25ALEW FLUID END FOR LEWCO WH-2214 PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 5 5 ½ 6 6 ½ 7 7 ½
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDALE PARTS LIST OEM STYLE FLUID END FOR EMSCO F-1600 / F-1300 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH
SOUTHWEST OILFIELD PRODUCTS, INC. SOUTHWEST FLUID END A FOR WIRTH TPK-1600, 7500 P.S.I. MUD PUMP EXPENDABLE PARTS LIST
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST FLUID END 8446-25A FOR WIRTH TPK-1600, 7500 P.S.I. MUD PERFORMANCE CHART LINER SIZE IN INCHES PUMP MAX MAX STROKE MODEL I.H.P.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 80-5 FLUI EN FOR OMO F-600 PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ ¾ 5 5 ½ 6 6 ¼ 6 ½ 6 ¾ 7 7 ¼ 7 ½ F-600 600
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 80-5 FLUI EN FOR OMO F-600 PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ ¾ 5 5 ½ 6 6 ¼ 6 ½ 6 ¾ 7 7 ¼ 7 ½ F-600 600
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST OEM STYLE 8475-5 FLUI EN FOR GRNER ENVER PZ-8 PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH 4 4 /2 5 5 ¼ 5 ½ 5 ¾ 6 6 ¼ 6 ½ 6 ¾
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST OL STYLE 876- FLUI EN FOR NTIONL -P-60 MU PUMP PERFORMNE HRT PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ 5 5 ¼ 5
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 8476-25 FLUI EN FOR NTIONL 12-P-160 MU PUMP PERFORMNE HRT PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH 4 ½ 4 ¾ 5 5 ¼
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 8476-25LEW FLUI EN FOR LEWO W-1712 PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH 4 ½ 5 5 ½ 6 6 ½ 7 W-1712 1700 120 MU
TABLE OF CONTENTS DESCRIPTION PAGE
TABLE OF CONTENTS DESCRIPTION PAGE BLOCK-HOOK COMBO...2 ROTARY SWIVEL...3 ROTARY TABLE...4 MKP STYLE SSW-40...5 MKF SERIES TRIPLEX MUD PUMPS... 6-8 MKP-165...9 MKP-275 TRIPLEX MUD PUMP...10 MKP-550 TRIPLEX
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 8 FLUI EN FOR GRNER ENVER PZ-/PZ-0 MU PUMP PERFORMNE HRT PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ ¼ ½ ¾ 6 6 ¼
PARTS MANUAL KA-3500PT PISTON TYPE PUMP INDEX
PARTS MANUAL KA-500PT PISTON TYPE PUMP INDEX - Parts Page Drawing page - Fluid End Detail page - Piston Assembly, Liner & Pony Rod Detail page - Water Manifold Assembly Detail page 5 - Oil Manifold Assembly
B/M No. B H00925 M /8-10T 3" B H00920 M /8-10T 2-1/2" Part Number. Item. No. 800B
Threaded Case (NPT), Packing Construction Page 80. Supersedes 03/0/ 87 8 B/M Mtg. Bracket Spline Ext. B00 4 H0095 M0454-3/8-0T 3" B5999 5 H0090 M07-3/8-0T -/" 7 Kit available for this model, P/N B778 for
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST OEM STYLE FLUI EN FOR GRNER ENVER PZ-/PZ-0 MU PUMP PERFORMNE HRT PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ ¼ ½ ¾ 6 6 ¼ 6
T BOP. prep. TC Cooper Cameron, Cameron Division
T BOP The Cameron T blowout preventer offers a unique combination of benefits including safety, economy, reliability, extended service life, reduced height and fast and easy service. Side ram removal on
PARTS BOOK TRIPLEX MUD PUMP WS-1300T
PARTS BOOK TRIPLEX MUD PUMP WS-1300T White Star Pump Co. 22718 Commercial Lane, Tomball, Texas 77375 2010 For parts and service contact White Star sales office 22718 Commercial Lane, Tomball, Texas 77375
RETSCO, Ltd. Shear Relief Valve Catalog. When Quality Counts, Count on RETSCO, Ltd. Check out our website:
RETSCO, Ltd. When Quality Counts, Count on RETSCO, Ltd Shear Relief Valve Catalog 3" 2" Check out our website: www.retscoinc.com Quick Reference for Top Level Assembly Part Number ASSEMBLY PART NUMBER
Dupagro B.V. Ooststeeg 102 Phone +31 (0) AX Wageningen The Netherlands 1/22
Ooststeeg 102 Phone +31 (0) 317 840 197 1/22 LEWCO 440-446-SK250 NOTE: some fluid end items are interchangeable with the SK250-ST250 style pump PN Dupagro SK250/ EW44/446 Original PN Ellis Williams EWCO
PARTS MANUAL KA-3500PT PISTON TYPE PUMP INDEX
PARTS MANUAL KA-3500PT PISTON TYPE PUMP INEX - Parts Page rawing page 2 - Fluid End etail page 3 - Piston & Liner etail page 4 - Parts List page 5-10 upagro B.V. 1/10 KA-126FE KA-34 KA-38 KT-34 KA-35 upagro
P844L3MS For Models: NL844L3.1MS1 and NL844L3.1MS2 PARTS CATALOG. Marine Generators Marine Diesel Engines Land-Based Generators
P844L3MS For Models: NL844L3.1MS1 and NL844L3.1MS2 PARTS CATALOG Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents
SUNNDA CORPORATION. Pressure Control Equipment. Boost Your Bottom Line! Sunnda Corporation
SUNNDA CORPORATION Boost Your Bottom Line! Pressure Control Equipment Sunnda Corporation 4543 Brittmoore Road, Houston, TX 77041 USA Phone: +1-713-849-5678 Fax: +1-713-849-5687 E-mail: sales@sunnda.com
F-800 and F-1000 MUD PUMP Specification and Performance
This product conform to API Spec 7K, F-800 and F-1000 MUD PUMP Specification and Performance Distributed by 1. Technical Specification and performance Parameter 1.1 F-800 and F-1000 Mud Pumps Specification
Features: Applications: Irrigation. Commercial. Construction. Municipal. Mining
Frame Mount 7.5" BOOK: FMT-015 DATE: Mar. 1, 2012 Features: Volute: Ductile iron for heavy-duty service. Back pullout design. Can be rotated for ease of installation. Impeller: Enclosed design for high
Material Specifications
5.2012.12.b 6200 Series Specifications The Flomore 6200 Series Pump line consists of a series of basic pump options all developed from a modular power unit. All units are pneumatically driven positive
SUNNDA CORPORATION. Go Above & Beyond
SUNNDA CORPORATION Go Above & Beyond Sunnda Corporation Headquartered in the energy capital of the world - Houston, Texas, Sunnda Corporation designs, manufactures, and markets an extensive line of oil
SERVICE MANUAL. PVR15-Manifold Series Pump. J Design Series INSTALLATION. Ordering Code PVR15 - _ RM - _ - - J
SERVICE MANUAL PVR15-Manifold Series Pump Installation, Startup, Operating Instructions, Parts Pages, Repair Procedures J Design Series This service manual applies to products with Ordering Codes like
Fast, Effective Blowout Protection
Dual or Single Ram Hydraulic BOPs Fast, Effective Blowout Protection MODEL DRH - DUAL RAM HYDRAULIC BOP Guide Rib Pipe Centering Guide Ram Rubber Pipe Ram Block Door Cylinder Locking Shaft Lip-Type Piston
Air/Oil Tanks Air Boosters Cylinder Options Multi-Stage Triple-Rod Basic Cylinders Accessories Technical Data TRA HOW TO ORDER: SERIES TRA (TRIPLE PIS
SERIES TRA TRIPLE ROD NEW HEAVY-DUTY TRIPLE ROD DESIGN TRD s TR Series has been redesigned. The new series, TRA is a Heavy-Duty version of the TR Series. The new series is a drop-in replacement of the
PARTS MANUAL KP-3300PT PISTON TYPE PUMP
PARTS MANUAL KP-3300PT PISTON TYPE PUMP INEX - Parts Page rawing page 4 - Fluid End etails & KP-245-250 Piston etail page 5 - KP-245-275R & KP-245-300 Piston etail page 6 - KP-190/160-A Water/Oil Manifold
LEP LIST OF EFFECTIVE PAGES
Chapter) LEP LIST OF EFFECTIVE PAGES Chapter Page Date Chapter Page Date TOC TOC -1 TOC- LEP LEP - 1 LEP - TOA RV - 1 RV - -- 1 7 8 9 1 11 1 1 1 1 1 17 18 19 -- 1 Title page March 1 17 1-- 1 71-- 1 7-1-
EXPLODED VIEW & PARTS LIST
SECTION 8 EXPLODED VIEW & PARTS LIST ALUMINUM, A300-*AA-****-*** 10 20 30 352 40 322 40 OPTIONAL 311 342 360 323 381 312 321 61 62 70 385 341 383 80 90 100 110 120 130 140 150 160 353 170 355 372 384 330
MA-40M(L)(H) TRIPLEX PLUNGER PUMP
MA-40M(L)(H) TRIPLEX PLUNGER No. of Plungers...3 Maximum Rated Speed...550 rpm Stroke Length...2.5 in. 63.5 mm Maximum Rated Power...40.0 hp 29.8 kw Maximum Rod Load...3456 lbs. 15.3 kn Weight MA-40M...750
MA-155M(L)(H) TRIPLEX PLUNGER PUMP...
MA-155M(L)(H) TRIPLEX PLUNGER PUMP... No. of plungers... 3 Maximum rated speed... 450 rpm Stroke length... 4.50 in. 4.3 mm Maximum rated power... 155.0 hp 5.5 kw Maximum rod load... 9087 lbs. 40.3 kn Weight
XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS BOLTS: Six 6mm grade 12.9. PLUNGERS: A special thick solid ceramic for
Smith Meter PD Meters Meter, PD Series, M16-S3, S5, S6 (1993-Present) Parts List
Issue/Rev. 0.0 (1/14) Smith Meter PD Meters Meter, PD Series, M16-S3, S5, S6 (1993-Present) Parts List Bulletin PO01023 *For meters which began shipping in 1993 to current. For meters shipped prior to
Bearing Frame Mount CAST IRON IMPELLER B4EYRMBM TYPE B SINGLE STAGE CENTRIFUGAL PUMP TABLE I
Page 0. Date November, 009 B4EYRMBM Packing Construction 3 8 B/M No. Rotation Case Diameter B50 CW M5 L09.88 80 A 3 See Supplement B 9 3 See Table I Shaft (Not sold separately) See Note 9 Cover, Suction
TL BOP. TL Custom Features:
TL BOP The Cameron TL BOP product line is the result of an evolution of Cameron s successful U, UII and T BOPs combined with custom features based on each customer s specific requirements. All TL BOPs
WORKFORCE MUD PUMP WORKFORCE PUMP. WORKFORCE TM WWS500 Pump WORKFORCE PUMP
PUMP TM Pump MUD PUMP PUMP GLOBAL SOLUTIONS DESIGNING, MANUFACTURING AND PACKAGING FOR THE OFFSHORE INDUSTRY TM Reinforced, 36 Kip high strength, stress relieved, alloy-steel Pump Frame provides rigidity
SERVICE INSTRUCTIONS. Material Pump
TM TM SERVICE INSTRUCTIONS Material Pump 9618 DESCRIPTION Model 9618 is designed for pumping petroleum products from the original container to a desired location. Due to its non-corrosive (aluminum and
WE WROTE THE BOOK ON MUD PUMPS.
WE WROTE THE BOOK ON MUD PUMPS. AMC is a full service distributor of Weatherford Mud Pumps along with Weatherford s new Ellis Williams mud pump line. We can offer either of these pumps under our distributorship
Mail to: P.O. Box 1177 Humble, TX Ship to: 1811 Humble Place Drive Humble, TX Phone: Fax:
Mail to: P.O. Box 77 Humble, TX 7737-77 Ship to: 8 Humble Place Drive Humble, TX 77338 Phone: 28-58-200 Fax: 28-58-20 E-mail: sales@cam-tech.com Website: www.cam-tech.com 7/9/6 7K-0032 Cam-Tech Products
Repair Parts Coulter Applicator Repair Parts
Repair Parts Coulter Applicator Repair Parts,000 Gallon Applicator...,000 Gallon Applicator Frame... Pump Kit...0 Injection Coulter Assembly... Knife Coulter Assembly... Tank Plumbing... Knife and Injection
Berkeley Cast Iron Impeller B6EXQBH SAE ENGINE MOUNT. Flanged Case, Packing Construction. Table I. Page Date March 4, 2013 Supersedes 01/01/04
BEXQBH Page. 8 83 84 ( X scale ) 3 3 5A 8 B/M Mtg. Spline B00 H05398 H053 -/-0T 3" Kit available for this model, P/N B9. Refer to Supplement-C of this section for list of components included with kit.
API 6A Gate Valves, Chokes, Mud Valves, Check valves, Test Units, Lubricants. WELL HEAD CATALOG
1 API 6A Gate Valves, Chokes, Mud Valves, Check valves, Test Units, Lubricants. WELL HEAD CATALOG Sevilla No. 211 Fracc. Praderas de Elite Reynosa, Tamps Tel: (899)-263-49-82 www.marvic-int.com 2 Table
GLOBAL DRILLING SOLUTIONS, INC STOCK LIST
GLOBAL DRILLING SOLUTIONS, INC STOCK LIST Item Description Qty in Stock Lighting Equipment LED Flood Light. IECEX Certificed. Explosion proof / Zone & ; Ex d IIB T Gb; IP. / Rated voltage: 00 00VAC, 0/0Hz.
P10V45 SERIES. AXIAL PISTON PUMPS Plant Location and Mailing Address Tower Oaks Blvd Houston TX SERVICE PARTS P10V45 SERIES SINGLE PUMPS
DELTA^Q SERVICE PARTS P10V45 SERIES SINGLE PUMPS DELTA^Q DELTA^Q DELTA^Q DELTA^Q DELTA^Q DELTA^Q DELTA^Q P10V45 SERIES AXIAL PISTON PUMPS Plant Location and Mailing Address 10827 Tower Oaks Blvd Houston
Serial Number Range. Jib-Hoist. from SN Part No
Serial Number Range Jib-Hoist from SN 56306 Part No. 645045 Rev B May 2010 2 Jib-Hoist Part No. 645045 How to Read Your Serial Number Part No. 645045 Jib-Hoist 3 Table of Contents This manual is updated
PWD. PWD API 610 BB1 Single Stage Pump
PWD PWD API 610 BB1 Single Stage Pump HYDRAULIC PERFORMANCE COVERAGE FLOW (m 3 /h) 50 Hz Performance Coverage Visit our web site at www.pumpworks610.com and specify flow and performance needs and obtain
Appendix D Outline Dimensions
Appendix D Outline Dimensions Models 91 691 and F91 F691 Bare with Flywheel L L1 M M1 M M1 L L1 Outline Dimensions Inches (Centimeters) Model A B C D E F G H J K 91, F91 1-13/16 2-3/8 3-11/16 13/32 5/8
AF0465-XX SERVICE KITS GENERAL DESCRIPTION MODEL DESCRIPTION CHART OPERATING AND SAFETY PRECAUTIONS THIS MANUAL COVERS THE FOLLOWING MODELS
OPERATOR S MANUAL INCLUDING: SERVICE KITS, TROUBLESHOOTING, PARTS LIST, DISASSEMBLY & REASSEMBLY. 4-1/4 AIR MOTORS AF044X-XX (4 STROKE) and AF046X-XX (6 STROKE) Also covers 637489 service kits AF044X-XX
Mud Pump Condition Monitoring and Pulsation Control Equipment Technology. IADC Maintenance Committee Meeting
Mud Pump Condition Monitoring and Pulsation Control Equipment Technology IADC Maintenance Committee Meeting 2008-10-08 IADC Presentation Optimization of the mud pump system performance through pump condition
NEECO PRODUCT CATALOGUE (FLN/FLSN)
PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY: The copy, reproduction, distribution, publication, display, modification, creation of derivative works, transmition, of any content on this catalog
Auto Air Valve Parts List
Auto Air Valve Parts List 1 Cap 1 2 O Ring 1 3 Cover 1 4 Lock Nut 5/16 UNF 1 5 Flat Washer 8mm 2 6 Flat Washer 2 7 Diaphragm 1 8 Guide bush 1 9 O Ring 1 10 O Ring 1 11 Shaft 1 12 Flat Washer 1 13 Seat
Lycoming Aircraft Engines Parts Catalog
Aircraft Engines Parts Catalog IO-0-BG Wide Cylinder Flange Crankcase Model Engine Part No. PC-0- Oliver Street Williamsport, PA 770 Aircraft Engines Parts Catalog IO-0-BG Wide Cylinder Flange Crankcase
S60 PARTS LIST AND DRAWINGS
PARTS MANUAL S60 PARTS LIST AND DRAWINGS Item Part Description Qty. 1 S60-001 Main Body 1 2 S60-002C Chuck Housing 1 3 S60-003C Main Valve Complete 1 3A S60-003 Valve Housing (Bare) 1 3B S60-019 Valve
DRAWING INDEX 1 07/01/2013. Company Project Project Number Location Revision Date
DRAWING INDEX Company Project Project Number Location Revision Date LEGACY OIL & GAS INC. PIERSON PILINE TO EOG 12069 VARIOUS LSD ISSUED FOR APPROVAL January 4, 2013 Drawing No. Client No. Description
Smith Meter PD Meter Meter, PD Series, K12- S1, S3, S5, S6, and S7
Smith Meter PD Meter Meter, PD Series, K12- S1, S3, S5, S6, and S7 Parts List Bulletin PO01018 Issue/Rev 0.1 (7/13) S1, S3, S5 S6, S7 Item Description Qty. K12-S1 K12-S5 K12-S7 Page 2 SS01018 Issue/Rev.
PARTS CATALOG MUD HOG REAR WHEEL DRIVE
PARTS CATALOG MUD HOG REAR WHEEL DRIVE For Case IH AF 7230, 8230, 9230 Combines TUTHILL DRIVE SYSTEMS MODEL NUMBERS: CNH14023 DUAL SPEED KIT FOR CASE IH AF 7230, 8230, 9230 COMBINES A Product of Tuthill
CENTRIFUGAL PUMPS 7.5" FRAME MOUNT SERIES FEATURES
FEATURES Volute: Ductile iron volute for heavy-duty service; back pullout design; can be rotated for ease of installation Impeller: Enclosed design for high efficiency; configured for superior NPSH characteristics;
GS12 Grape Spreader. Illustrated Parts Breakdown
GS Grape Spreader Illustrated Parts Breakdown Page Front End Assembly Page Axle Assembly Page Floor & Apron Page Pump Assembly Page Page Hydraulics Manifold Components Page Gearbox Components S/N - Page
PA 52 HY REACH. Mk2 Models. Parts Manual. Publication 490 October 2005 Part No Revision:
Publication 490 October 2005 Part No. 41570.90 Revision: 07.11.08 PA 52 HY REACH Mk2 Models Parts Manual For best performance USE ONLY McCONNEL SERVICE PARTS To be assured of the latest design improvements
HAMMER UNIONS AND SWIVEL JOINTS. Sara Sae
HAMMER UNIONS AND SWIVEL JOINTS Sara Sae Quality and Innovation Sara manufactures a diverse range of oilfield equipment in its manufacturing facility in India, using the latest design techniques and CNC
P773-2 For Model: M773LW2 PARTS MANUAL. Marine Generators Marine Diesel Engines Land-Based Generators
P773-2 For Model: M773LW2 PARTS MANUAL Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to the
MODEL 5540 CONTENTS. Installation, Operation and Maintenance Instructions 1.0 GENERAL
Installation, Operation and Maintenance Instructions MODEL 5540 Sep 20 CONTENTS.0 GENERAL. Model Number---------------------------------------------------------------------------------------------------------------
CXV Series Pump Body Service Parts List
Document Number Issue Date 09/29/78 Rev. Date 1/16/18 CXV Series Pump Body Service Parts List C10 Series CXVC10C CXVC10D CXVC10E CXVC10F C20 Series CXVC20B CXVC20C CXVC20D CXVC20E CXVC20F D Series Pump
300 COMPACT. Main Drive Components. Pipe & Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A.
00 COMPACT Main Drive Components 0 0 0 0 0 0 Screw - x / () 00 Lock Washer () Rear Centering Head Rear Centering Head (Europe) 00 Rear Jaw 0 Step Pin 0 Scroll 0 Back Plate Back Plate (Europe) Rear Centering
XMV 3400 RPM D VERSION 1 WITH GAS ENGINE FLANGE DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XMV 3400 RPM D VERSION 1 WITH GAS ENGINE FLANGE DIMENSIONS BOLTS: Eight 6mm grade 12.9. PLUNGERS: A special thick solid ceramic
P R O D U C T S. Jinan Tianwei Innovation Oilfield Equipment Enterprise
I P R O D U C T S Mud pump parts & Fluid end expendables Pistons Valves & Seats Liners Piston rods & Pony rods Fluid end parts Modules Drilling Tools Rotary slips Drilling collar slips Safety clamps Casing
GSN-8 Spreader. Illustrated Parts Breakdown. Page 1 Front End Assembly Page 2 Axle Assembly Page 3 Floor & Apron Page 4 Pump Assembly
GSN- Spreader Illustrated Parts Breakdown Page Front End Assembly Page Axle Assembly Page Floor & Apron Page Pump Assembly Page Hydraulics Page Manifold Components Page Manifold Cover Page Gearbox Components
BOLT TENSIONERS PUMPS & ACCESSORIES. Tools for every conceivable need...
BOLT TENSIONERS PUMPS & ACCESSORIES Tools for every conceivable need... www.powermaster.in BOLT TENSIONERS BOLT TENSIONERS Bolt tensioning is now the preferred method of tightening bolts and studs on all
6200 Series. Specifications. Fluid End Power End Models 6211, 6212, 6221, & 6222 Models 6241 & 6242 Part Material Part Material Part Material
5.2018.12.i 6200 Series Specifications The Flomore 6200 Series Pump line consists of a series of basic pump options all developed from a modular power unit. All units are pneumatically driven positive
REPAIR PARTS ROBJETSU. Jets and Submersibles REPAIR PARTS FOR OBSOLETE PRODUCT
REPAIR PARTS ROBJETSU Jets and Submersibles REPAIR PARTS FOR OBSOLETE PRODUCT Index JETS J03, J05, J03N, J05N...3 JS...4 JL07N, JL0N...5 GH...6 Primeflow...7 XSH...8 VA...9 SUBMERSIBLES E... 0 4" High
Parts list. See Frame parts list Page 12. See hydraulic pump. exploded view. Page 14. See work head. exploded view. Page 7
Parts list See Frame parts list Page 12 See hydraulic pump exploded view Page 14 See work head exploded view Page 7 See electrical parts list Page 18 See hoist parts list Page 11 See Frame parts list Page
Appendix D Outline Dimensions
Appendix D Outline Dimensions Model D81 Bare with Flywheel Suction valve unloaders (optional) 5-1/2" (13.) 5-1/2" (13.) 1/4" NPT drain Inlet 2" Weld flange Inlet pressure guage Outlet pressure gauge Outlet
ULTRABOND Methacrylate Adhesive Dispensing unit IMP-DUO Start-Up Instructions
ULTRABOND Methacrylate Adhesive Dispensing unit IMP-DUO-54646 Start-Up Instructions MAGNUM VENUS PLASTECH UltraBond Start-Up Instructions Rev. 5/07 START-UP INSTRUCTIONS 1. Attach main air supply to the
Service Manual for Hydraulic Vane Pumps Flange Mounted
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Service Manual for Hydraulic Vane Pumps Flange Mounted SM PSCF/07.03
HWB Series GENERAL PUMP. Hydraulic Drive Triplex Plunger Pump INDUSTRIAL INDUSTRIAL FEATURES
GENERAL PUMP HWB Series Hydraulic Drive Triplex Plunger Pump FEATURES INDUSTRIAL INDUSTRIAL Innovative drive design eliminates need for auxiliary hydraulic drive Forged brass manifold Built-in Pump Thermal
DRILLING EQUIPMENT BRIEF INTRODUCTION
BRIEF INTRODUCTION Centrum Petroleum Machinery Limited Company (CPMC) has been proudly supplying Drilling Equipment to the oilfield since 2007. Through our Domestic and International distribution network
WALK-BEHIND TROWEL B436 B436E B436SD
WALK-BEHIND TROWEL B436 B436E B436SD Doc. # PB-B0900 Orig. Rel. - 05-200 Curr. Rev. - 06 Rev. Date - -202 Bartell Morrison Inc. Bartell Morrison (USA) LLC 375 Annagem Blvd. 25 Industrial Drive, Mississauga,
OT LE 600/900/1200 GAS
OXYTHERM LE Burners Configured Item Number: OT LE for configured item number OT LE ASSEMBLY NUMBER PAGES SERIES FUEL Choice of burner series Choice of fuel 12 1200 Series 6 600 Series 9 900 Series G Gas
S,W and SpaceSaver S Centrifugal Pumps W Centrifugal Pumps SpaceSaver Centrifugal Pumps
S,W and SpaceSaver S Centrifugal Pumps W Centrifugal Pumps SpaceSaver Centrifugal Pumps S&W PUMPS Proven Performance S & W pumps have proven themselves in a broad range of industrial, processing and mining