SOUTHWEST OILFIELD PRODUCTS, INC. SOUTHWEST FLUID END A FOR WIRTH TPK-1600, 7500 P.S.I. MUD PUMP EXPENDABLE PARTS LIST
|
|
|
- Philomena Rodgers
- 6 years ago
- Views:
Transcription
1 SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST FLUID END A FOR WIRTH TPK-1600, 7500 P.S.I. MUD PERFORMANCE CHART LINER SIZE IN INCHES PUMP MAX MAX STROKE MODEL I.H.P. S.P.M. LENGTH 4 4 1/4 4 1/2 4 3/ /4 5 1/2 5 3/ /4 6 1/2 6 3/4 7 TPK MAX-P.S.I G.P.R R.P.M NOTE: I.H.P.= INPUT HORSE POWER S.P.M.= STROKES PER MINUTE P.S.I.= POUNDS PER SQUARE INCH G.P.R.= GALLONS PER REVOLUTION *MAX-P.S.I. CALCULATIONS DO NOT EXCEED MAXIMUM FLUID END PRESSURE RATINGS BASED ON 100% VOLUMETRIC EFFICIENCY AND 90% MECHANICAL EFFICIENCY 1600 I.H.P. X 90% MECHANICAL EFFICIENCY= 1440 WHP APPROVED BY: DATE: FILE# F:\ACAD\FORMS\WIRTH TPK 1600 PAGE 1.xlsREVISED BY: REVISION DATE: REVISION
2
3 SOUTHWEST A TPK-1600 WIRTH 7500 psi FLUID END TYPE MODEL OF PUMP SIZE OF PUMP ITEM NO. PART NO. DESCRIPTION A FLUID END ASSEMBLY: (CONSISTS OF ITEMS: 3,4,5,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,37,39,&40) XX LINER REFER TO GUIDE FOR ORDERING CHART ON PG. 6 FOR TYPE (G); (Y); AND FOR BORE SIZE (XX) XX** LINER SEAL LINER WEARPLATE WEARPLATE O-RING (PARKER SIZE NUMBER 2-369) ** WEARPLATE & MODULE SEAL 6 6 XX-BYY PISTON (REFER TO GUIDE FOR ORDERING CHART ON PAGE 6 FOR SIZE (XX) AND FOR TYPE(YY)) PISTON SEAL PISTON ROD (WITH ELASTIC STOP NUT) 3 9 API-4ESN PISTON ROD NUT *TORQUE TO 1000 FT.LBS (MAX) SUB ROD CW ROD CLAMP (WITH WATER JACKET) 6 11A 1200H30 HOSE (1/2 X 30 WITH ½ MALE X 3/8 MALE CONNECTIONS) 3 11B PIPE (3/8 X 13 GALVANIZED AND THREADED ON ONE END) 3 11C BOLT (5/8 X 6-1/2 GRADE 8 BOLT WITH LOCK NUT AND WASHER) *TORQUE TO 150 FT.LBS (MAX) G-26 PONY ROD 3 13 SEE PAGE 6 VALVE COMPLETE 6 14 SEE PAGE 6 VALVE INSERT 6 15 SEE PAGE 6 VALVE SPRING 6 16 SEE PAGE 6 VALVE SEAT 6 HP-1700 HYDRAULIC SEAT PULLER KIT COMPLETE (REFER TO TOOLS SECTION IN CATALOG) VALVE COVER FLANGE SCREW GLAND A PLUG (COMPLETE WITH VALVE GUIDE; BUSHING; AND SCREWS) INCLUDES ITEMS 20, 21,22, & 23 6 ** POLYURETHANE SEAL AVAILABLE 2988-U; P-115U; 2974-U; 4700-IU QTY. REQ D APPROVED BY: Earl Foote DATE: PAGE 1 OF 2 FILE# A TPK1600 SWFE BILL OF MATERIALS.DOC REVISED BY: Earl Foote REVISION DATE: REVISION A REVISION A REVISED TORQUE VALUES BASED ON MULTIPLE LUBRICATION CONDITIONS.
4 SOUTHWEST TPK-1600 WIRTH 7500 psi FLUID END TYPE MODEL OF PUMP SIZE OF PUMP ITEM NO. PART NO. DESCRIPTION 20 P115** HP VALVE COVER PLUG NITRILE SEAL R-25 VALVE GUIDE (COMPLETE WITH BUSHING #4700-I) I VALVE GUIDE BUSHING VALVE GUIDE SCREW *TORQUE TO FT.LBS VALVE COVER STUD (WITH 1-1/4-7 HEAVY HEX NUT) *TORQUE TO FT.LBS SPACER FLANGE CAP SCREW *TORQUE TO FT.LBS LINER RETAINER PLATE LINER RETAINER FLANGE LINER RETAINER CAP SCREW *TORQUE TO FT.LBS LINER RETAINER GLAND SUCTION MODULE STUD (WITH 1-3/4-8 HEAVY HEX NUTS) *TORQUE TO FT.LBS SUCTION MANIFOLD CAP SCREW *TORQUE TO FT.LBS SUCTION MANIFOLD ** SUCTION MANIFOLD SEAL SUCTION MODULE DISCHARGE MODULE DOWEL PIN DISCHARGE MANIFOLD DISCHARGE MANIFOLD STUD (WITH 1-1/4-7 HEAVY HEX NUT) *TORQUE TO FT.LBS ** DISCHARGE MANIFOLD SEAL POWER END CAP SCREW *TORQUE TO FT.LBS SET SCREW SPACER FLANGE 3 *TORQUE VALUES ARE DEPENDANT ON TYPE OF LUBE USED. THE FIRST VALUE IS COPPER COAT, THE SECOND VALUE IS MOLY GREASE, AND THE THIRD VALUE IS DRY NO LUBE (NOT RECOMMENDED). THE TORQUE VALUE FOR THE PISTON ROD NUT (ITEM 9) AND THE ROD CLAMP BOLT (ITEM 11C) IS A MAXIMUM VALUE AND SHOULD BE USED REGARDLESS OF LUBE TYPE. ** POLYURETHANE SEAL AVAILABLE 2974-U; P-115U; 2988-U; 4700-IU QTY. REQ D APPROVED BY: Earl Foote DATE: PAGE 2 OF 2 FILE# A TPK1600 SWFE BILL OF MATERIALS.DOC REVISED BY: Earl Foote REVISION DATE: REVISION A REVISION A REVISED TORQUE VALUES BASED ON MULTIPLE LUBRICATION CONDITIONS.
5 SOUTHWEST\WIRTH TPK " X 12" 7500 P.S.I. GUIDE TO ORDERING PISTONS LINERS LINER SEALS SIZE FAIL-SAFE DUAL-DURO GRAYLOY ZIRCONIA RUBBER URETHANE 4" 76-BSF 76-BDD 1388G06 N/A U 4 1/4" 77-BFS 77-BDD 1388G07 N/A U 4 1/2" 78-BFS 78-BDD 1388G08 N/A U 4 3/4" 79-BFS 79-BDD 1388G09 N/A U 5" 81-BFS 81-BDD 1388G1 1388ZIR U 5 1/4" 82-BFS 82-BDD 1388G2 N/A U 5 1/2" 83-BFS 83-BDD 1388G3 1388ZIR U 5 3/4" 84-BFS 84-BDD 1388G4 N/A U 6" 85-BFS 85-BDD 1388G5 1388ZIR U 6 1/4" 86-BFS 86-BDD 1388G6 N/A U 6 1/2" 87-BFS 87-BDD 1388G7 1388ZIR U 6 3/4" 88-BFS 88-BDD 1388G8 N/A U 7" 89-BFS 89-BDD 1388G9 N/A U VALVES & SEATS TYPE VALVE INSERT SPRING STAINLESS SPRING SEAT PULLER HEAD FULL OPENING SWND-6-V SWND-6-S4 SWND-6-PH *DBL-ANGLE O-RING SWR SWR SWR SWR SWR SWTM-3-7D *STANDARD PLATE SWR SWR SWR SWR SWR SWTM-3-7D *CROSS ARM SEAT SW5B-EH SWUDD-6A SW SW SW6ADD-B4 SWJDD-6A * CENTER GUIDED VALVES AND SEATS NOTE: DUAL-DURO AND GRAYLOY ARE REGISTERED TRADEMARKS OF SOUTHWEST OILFIELD PRODUCTS, INC. APPROVED BY: DATE: FILE# H:\ACAD\FORMS\xxx.XLS REVISED BY: REVISION DATE: REVISION Pg. 6
6
7 BILL OF MATERIAL # A-BM DISCHARGE CROSS / STRAINER 7500 PSI W.P. SOUTHWEST FLUID END TYPE MODEL OF PUMP SIZE OF PUMP ITEM NO. PART NO. DESCRIPTION QTY. REQ D A ASSEMBLY: 5 1/8 10,000 LB. API FLANGES FOR HYDRIL DAMPNER K DISCHARGE CROSS RD STRAINER BFLANGE 5 1/8 10,000 # API BLIND FLANGE 1 4 BX-169 RING JOINT 4 5 BX-155 RING JOINT STUDS, COMPLETE (WITH HEX NUTS ***) 48 7 HHN /8-7 HEAVY HEX NUT 48 APPROVED BY: DATE: FILE# F:\FORMS\ A-BM REVISED BY: REVISION DATE: REVISION
8
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8477-25A FLUID END FOR GARDNER DENVER PZ-11/PZ-10 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8429-A FLUID END FOR BREWSTER B-1600-T / B-1300-T MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE MODEL I.H.P. S.P.M. LENGTH 4
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8412A FLUID END FOR IDECO T-800 PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 ½ 5 5 ¼ 5 ½ 5 ¾ 6 6 ¼
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE FLUID END FOR OILWELL HD-1700-PT/HD-1400-PT MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8432-A FLUID END FOR EWECO E-2200 PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 5 5 ½ 6 6 ½ 7 7 ½ 8 8 ½
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE FLUID END FOR NATIONAL 14-P-220 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8482-A FLUID END FOR NATIONAL 14-P-220 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE FLUID END FOR WEATHERFORD MP-10 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8476-25A FLUID END FOR NATIONAL 12-P-160 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8490-25ALEW FLUID END FOR LEWCO WH-2214 PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 5 5 ½ 6 6 ½ 7 7 ½
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8487A FLUID END FOR OILWELL A-1100-PT / A-850-PT PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 ½ 5 5
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8482-25A FLUID END FOR NATIONAL 14-P-220 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8429-7A FLUID END FOR BREWSTER B-1100-T / B-1000-T MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE MODEL I.H.P. S.P.M. LENGTH 4
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8422A FLUID END FOR EMSCO F-1000 PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 1/2 5 5 ¼ 5 ½ 5 ¾ 6 6
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8477A FLUID END FOR GARDNER DENVER PZ-11/PZ-10 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8407-7A FLUID END FOR IDECO T-1600 / T-1300 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8404A FLUID END FOR BOMCO F-1600 / F-1300 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE 8475-5 FLUID END FOR GARDNER DENVER PZ-9 (PZJ) PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 1/2 5 5
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE 8475-5 FLUID END FOR GARDNER DENVER PZ-8 PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 1/2 5 5 ¼ 5 ½
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8488-1A FLUID END FOR OILWELL A-1700-PT/A-1400-PT MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE FLUID END FOR BOMCO F-1600 / F-1300 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDALE PARTS LIST OEM STYLE FLUID END FOR EMSCO F-1600 / F-1300 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 80-5 FLUI EN FOR OMO F-600 PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ ¾ 5 5 ½ 6 6 ¼ 6 ½ 6 ¾ 7 7 ¼ 7 ½ F-600 600
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 80-5 FLUI EN FOR OMO F-600 PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ ¾ 5 5 ½ 6 6 ¼ 6 ½ 6 ¾ 7 7 ¼ 7 ½ F-600 600
TABLE OF CONTENTS DESCRIPTION PAGE
TABLE OF CONTENTS DESCRIPTION PAGE BLOCK-HOOK COMBO...2 ROTARY SWIVEL...3 ROTARY TABLE...4 MKP STYLE SSW-40...5 MKF SERIES TRIPLEX MUD PUMPS... 6-8 MKP-165...9 MKP-275 TRIPLEX MUD PUMP...10 MKP-550 TRIPLEX
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 8476-25 FLUI EN FOR NTIONL 12-P-160 MU PUMP PERFORMNE HRT PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH 4 ½ 4 ¾ 5 5 ¼
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 8476-25LEW FLUI EN FOR LEWO W-1712 PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH 4 ½ 5 5 ½ 6 6 ½ 7 W-1712 1700 120 MU
PARTS BOOK TRIPLEX MUD PUMP WS-1300T
PARTS BOOK TRIPLEX MUD PUMP WS-1300T White Star Pump Co. 22718 Commercial Lane, Tomball, Texas 77375 2010 For parts and service contact White Star sales office 22718 Commercial Lane, Tomball, Texas 77375
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST OEM STYLE 8475-5 FLUI EN FOR GRNER ENVER PZ-8 PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH 4 4 /2 5 5 ¼ 5 ½ 5 ¾ 6 6 ¼ 6 ½ 6 ¾
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST OL STYLE 876- FLUI EN FOR NTIONL -P-60 MU PUMP PERFORMNE HRT PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ 5 5 ¼ 5
B/M No. B H00925 M /8-10T 3" B H00920 M /8-10T 2-1/2" Part Number. Item. No. 800B
Threaded Case (NPT), Packing Construction Page 80. Supersedes 03/0/ 87 8 B/M Mtg. Bracket Spline Ext. B00 4 H0095 M0454-3/8-0T 3" B5999 5 H0090 M07-3/8-0T -/" 7 Kit available for this model, P/N B778 for
PARTS MANUAL KA-3500PT PISTON TYPE PUMP INDEX
PARTS MANUAL KA-500PT PISTON TYPE PUMP INDEX - Parts Page Drawing page - Fluid End Detail page - Piston Assembly, Liner & Pony Rod Detail page - Water Manifold Assembly Detail page 5 - Oil Manifold Assembly
T BOP. prep. TC Cooper Cameron, Cameron Division
T BOP The Cameron T blowout preventer offers a unique combination of benefits including safety, economy, reliability, extended service life, reduced height and fast and easy service. Side ram removal on
CENTRIFUGAL PUMPS 7.5" FRAME MOUNT SERIES FEATURES
FEATURES Volute: Ductile iron volute for heavy-duty service; back pullout design; can be rotated for ease of installation Impeller: Enclosed design for high efficiency; configured for superior NPSH characteristics;
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 8 FLUI EN FOR GRNER ENVER PZ-/PZ-0 MU PUMP PERFORMNE HRT PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ ¼ ½ ¾ 6 6 ¼
Features: Applications: Irrigation. Commercial. Construction. Municipal. Mining
Frame Mount 7.5" BOOK: FMT-015 DATE: Mar. 1, 2012 Features: Volute: Ductile iron for heavy-duty service. Back pullout design. Can be rotated for ease of installation. Impeller: Enclosed design for high
API 6A Gate Valves, Chokes, Mud Valves, Check valves, Test Units, Lubricants. WELL HEAD CATALOG
1 API 6A Gate Valves, Chokes, Mud Valves, Check valves, Test Units, Lubricants. WELL HEAD CATALOG Sevilla No. 211 Fracc. Praderas de Elite Reynosa, Tamps Tel: (899)-263-49-82 www.marvic-int.com 2 Table
Bearing Frame Mount CAST IRON IMPELLER B4EYRMBM TYPE B SINGLE STAGE CENTRIFUGAL PUMP TABLE I
Page 0. Date November, 009 B4EYRMBM Packing Construction 3 8 B/M No. Rotation Case Diameter B50 CW M5 L09.88 80 A 3 See Supplement B 9 3 See Table I Shaft (Not sold separately) See Note 9 Cover, Suction
RETSCO, Ltd. Shear Relief Valve Catalog. When Quality Counts, Count on RETSCO, Ltd. Check out our website:
RETSCO, Ltd. When Quality Counts, Count on RETSCO, Ltd Shear Relief Valve Catalog 3" 2" Check out our website: www.retscoinc.com Quick Reference for Top Level Assembly Part Number ASSEMBLY PART NUMBER
TL BOP. TL Custom Features:
TL BOP The Cameron TL BOP product line is the result of an evolution of Cameron s successful U, UII and T BOPs combined with custom features based on each customer s specific requirements. All TL BOPs
C BOP. TC Cooper Cameron, Cameron Division
C BOP The Cameron C BOP was designed as an emergency safety head for snubbing coiled tubing workover applications. The main function of the C BOP is to shear whatever is in the hole - from braided cable
Material Specifications
5.2012.12.b 6200 Series Specifications The Flomore 6200 Series Pump line consists of a series of basic pump options all developed from a modular power unit. All units are pneumatically driven positive
Fast, Effective Blowout Protection
Dual or Single Ram Hydraulic BOPs Fast, Effective Blowout Protection MODEL DRH - DUAL RAM HYDRAULIC BOP Guide Rib Pipe Centering Guide Ram Rubber Pipe Ram Block Door Cylinder Locking Shaft Lip-Type Piston
SHEET DESCRIPTION PAGE NO. NO.
CONTENTS SHEET DESCRIPTION PAGE NO. NO. E-1 CYLINDER BLOCK, LINER AND OIL SUMP 2 E-2 CYLINDER HEAD 6 E-3 PISTON AND CONNECTING ROD ASSY 10 E-4 CRANK SHAFT 12 E-5 TIMING GEAR COVER & SEALING 14 E-6 TIMING
6200 Series. Specifications. Fluid End Power End Models 6211, 6212, 6221, & 6222 Models 6241 & 6242 Part Material Part Material Part Material
5.2018.12.i 6200 Series Specifications The Flomore 6200 Series Pump line consists of a series of basic pump options all developed from a modular power unit. All units are pneumatically driven positive
PARTS MANUAL KA-3500PT PISTON TYPE PUMP INDEX
PARTS MANUAL KA-3500PT PISTON TYPE PUMP INEX - Parts Page rawing page 2 - Fluid End etail page 3 - Piston & Liner etail page 4 - Parts List page 5-10 upagro B.V. 1/10 KA-126FE KA-34 KA-38 KT-34 KA-35 upagro
Air/Oil Tanks Air Boosters Cylinder Options Multi-Stage Triple-Rod Basic Cylinders Accessories Technical Data TRA HOW TO ORDER: SERIES TRA (TRIPLE PIS
SERIES TRA TRIPLE ROD NEW HEAVY-DUTY TRIPLE ROD DESIGN TRD s TR Series has been redesigned. The new series, TRA is a Heavy-Duty version of the TR Series. The new series is a drop-in replacement of the
GENSET ENGINE-G25/30. ITEM PART NO. DESCRIPTION QTY QTY REMARKS No. G25 G30
ITEM PART NO. DESCRIPTION QTY QTY REMARKS No. G25 G30 1 CONTENTS SHEET DESCRIPTION PAGE NO. NO. E-1 CYLINDER BLOCK, LINER AND OIL SUMP 2 E-2 CYLINDER HEAD 6 E-3 PISTON AND CONNECTING ROD ASSY 10 E-4 CRANK
MA-40M(L)(H) TRIPLEX PLUNGER PUMP
MA-40M(L)(H) TRIPLEX PLUNGER No. of Plungers...3 Maximum Rated Speed...550 rpm Stroke Length...2.5 in. 63.5 mm Maximum Rated Power...40.0 hp 29.8 kw Maximum Rod Load...3456 lbs. 15.3 kn Weight MA-40M...750
S60 PARTS LIST AND DRAWINGS
PARTS MANUAL S60 PARTS LIST AND DRAWINGS Item Part Description Qty. 1 S60-001 Main Body 1 2 S60-002C Chuck Housing 1 3 S60-003C Main Valve Complete 1 3A S60-003 Valve Housing (Bare) 1 3B S60-019 Valve
MA-155M(L)(H) TRIPLEX PLUNGER PUMP...
MA-155M(L)(H) TRIPLEX PLUNGER PUMP... No. of plungers... 3 Maximum rated speed... 450 rpm Stroke length... 4.50 in. 4.3 mm Maximum rated power... 155.0 hp 5.5 kw Maximum rod load... 9087 lbs. 40.3 kn Weight
Mud Pump Condition Monitoring and Pulsation Control Equipment Technology. IADC Maintenance Committee Meeting
Mud Pump Condition Monitoring and Pulsation Control Equipment Technology IADC Maintenance Committee Meeting 2008-10-08 IADC Presentation Optimization of the mud pump system performance through pump condition
Parts online Spare parts list
Parts online Spare parts list Refer to the Parts online web page for most up to date information. The printed information might be outdated. Contents Service, repair and wear part kits Kit list 1 Mechanical
WE WROTE THE BOOK ON MUD PUMPS.
WE WROTE THE BOOK ON MUD PUMPS. AMC is a full service distributor of Weatherford Mud Pumps along with Weatherford s new Ellis Williams mud pump line. We can offer either of these pumps under our distributorship
U1 PUMP PARTS PRICE LIST
ITEM 1 7 8 9 060-064 - 130-134 - 133-U1 PUMP PARTS PRICE LIST DESCRIPTION QTY. PER PUMP 060-U1 Pump Body 1 See Note 1 1 060-U1 Pump Body with Flush 1 See Note 1 1 064-U1 Rectangular Flange Inlet Body 1
EXPLODED VIEW & PARTS LIST
SECTION 8 EXPLODED VIEW & PARTS LIST ALUMINUM, A300-*AA-****-*** 10 20 30 352 40 322 40 OPTIONAL 311 342 360 323 381 312 321 61 62 70 385 341 383 80 90 100 110 120 130 140 150 160 353 170 355 372 384 330
U1 PUMP PARTS PRICE LIST
ITEM 1 7 8 9 PUMP 030-U1 Pump Body 1 See Note 1 1 030-U1 Pump Body with Flush 1 See Note 1 1 034-U1 Rectangular Flange Inlet Body 1 See Note 1 1 034-U1 Rect. Flange Inlet Body with Flush 1 See Note 1 1
Cameron International Corporation
Cameron International Corporation 2 Cameron International Corporation About this Catalog The purpose of this catalog is to serve as a quick reference for our customers. However, many of Cameron s products
PARTS MANUAL KP-3300PT PISTON TYPE PUMP
PARTS MANUAL KP-3300PT PISTON TYPE PUMP INEX - Parts Page rawing page 4 - Fluid End etails & KP-245-250 Piston etail page 5 - KP-245-275R & KP-245-300 Piston etail page 6 - KP-190/160-A Water/Oil Manifold
WORKFORCE MUD PUMP WORKFORCE PUMP. WORKFORCE TM WWS500 Pump WORKFORCE PUMP
PUMP TM Pump MUD PUMP PUMP GLOBAL SOLUTIONS DESIGNING, MANUFACTURING AND PACKAGING FOR THE OFFSHORE INDUSTRY TM Reinforced, 36 Kip high strength, stress relieved, alloy-steel Pump Frame provides rigidity
(Interchangeable with Demco Model DM Gate Valve)
DM GATE VALVE (Interchangeable with Demco Model DM Gate Valve) The DM Gate Valve, are solid gate, rising stem, gate valves with resilient seals. They are purpose made for mud, cement, fracturing and water
SUNNDA CORPORATION. Go Above & Beyond
SUNNDA CORPORATION Go Above & Beyond Sunnda Corporation Headquartered in the energy capital of the world - Houston, Texas, Sunnda Corporation designs, manufactures, and markets an extensive line of oil
XMV 3400 RPM D VERSION 1 WITH GAS ENGINE FLANGE DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XMV 3400 RPM D VERSION 1 WITH GAS ENGINE FLANGE DIMENSIONS BOLTS: Eight 6mm grade 12.9. PLUNGERS: A special thick solid ceramic
Hydraulic Calculations
Hydraulic Calculations Target Hydraulics make a list here for you learn and check when you design your hydraulic system/hydraulic power pack unit or hydraulic components. Target hydraulics assumes no liability
INSTALLATION INSTRUCTIONS Progress Technology Rear Anti-Sway Bar Honda Civic Part # No Revision (7/20/16)
INSTALLATION INSTRUCTIONS Progress Technology Rear Anti-Sway Bar Honda Civic 96-00 Part # 62.1042 No Revision (7/20/16) WHO SHOULD INSTALL THIS PRODUCT? Progress Technology products should only be installed
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST OEM STYLE FLUI EN FOR GRNER ENVER PZ-/PZ-0 MU PUMP PERFORMNE HRT PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ ¼ ½ ¾ 6 6 ¼ 6
CENTRIFUGAL PUMPS SAE ENGINE DRIVE 10" FEATURES
FEATURES Volute: Heavy ductile iron construction; back pullout design; can be rotated for ease of installation Impeller: Ductile iron enclosed design for high efficiency; superior NPSH characteristics
Berkeley Cast Iron Impeller B4JPBH ELECTRIC MOTOR DRIVE. Flanged Case, Packing Construction. Table I. Table II
B4JPBH Flanged Case, Packing Construction Page 0. Date March 4, 03 Supersedes 0/0/04 80B 80B 3 See Supplement B 8 4 B/M HP PH RPM "U" Dim. Imp. Dia. Imp. B588 0 3 800 -/4" 0.06" L0680 B5883 5 3 800 -/4"
XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS BOLTS: Six 6mm grade 12.9. PLUNGERS: A special thick solid ceramic for
CENTRIFUGAL PUMPS CLOSE-COUPLED 9" FEATURES SPECIFICATIONS APPLICATIONS
FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Enclosed, cast iron design for high efficiency; hydraulically balanced for reduced
F-800 and F-1000 MUD PUMP Specification and Performance
This product conform to API Spec 7K, F-800 and F-1000 MUD PUMP Specification and Performance Distributed by 1. Technical Specification and performance Parameter 1.1 F-800 and F-1000 Mud Pumps Specification
SUNNDA CORPORATION. Pressure Control Equipment. Boost Your Bottom Line! Sunnda Corporation
SUNNDA CORPORATION Boost Your Bottom Line! Pressure Control Equipment Sunnda Corporation 4543 Brittmoore Road, Houston, TX 77041 USA Phone: +1-713-849-5678 Fax: +1-713-849-5687 E-mail: sales@sunnda.com
SERVICE INSTRUCTIONS. Material Pump
TM TM SERVICE INSTRUCTIONS Material Pump 9618 DESCRIPTION Model 9618 is designed for pumping petroleum products from the original container to a desired location. Due to its non-corrosive (aluminum and
U1 PUMP PARTS PRICE LIST
006-014 - 015-018 - 024-U1 PUMP PARTS PRICE LIST ITEM 1 7 8 9 DESCRIPTION QTY. PER PART PUMP 006-U1 Pump Body 1 See Note 1 1 006-U1 Pump Body with Flush 1 See Note 1 1 015-U1 Pump Body 1 See Note 1 1 015-U1
GLOBAL DRILLING SOLUTIONS, INC STOCK LIST
GLOBAL DRILLING SOLUTIONS, INC STOCK LIST Item Description Qty in Stock Lighting Equipment LED Flood Light. IECEX Certificed. Explosion proof / Zone & ; Ex d IIB T Gb; IP. / Rated voltage: 00 00VAC, 0/0Hz.
Dupagro B.V. Ooststeeg 102 Phone +31 (0) AX Wageningen The Netherlands 1/22
Ooststeeg 102 Phone +31 (0) 317 840 197 1/22 LEWCO 440-446-SK250 NOTE: some fluid end items are interchangeable with the SK250-ST250 style pump PN Dupagro SK250/ EW44/446 Original PN Ellis Williams EWCO
FULL COLOR TAB #6 TC 105
FULL COLOR TAB #6 TC 105 SERIES TC 2-STAGE TELESCOPING CYLINDER CONSTRUCTION FEATURES 3 Bore Sizes: 0.75, 1.50 and 2.50 Strokes up to 60 2-Stage Telescoping Space Saving Design 100% Double Action Heavy-Duty
Single, oversized roller compresses a low friction hose through a full 360-degrees of rotation
Graco EP Series Peristaltic Hose Pump Technology Single, oversized roller compresses a low friction hose through a full 360-degrees of rotation More flow per revolution than conventional designs Inexpensive
COMPLETIONS AND WORKOVER RIG RIG DISCOVERY 4 SPECIFICATIONS BROCHURE
COMPLETIONS AND WORKOVER RIG RIG DISCOVERY 4 SPECIFICATIONS BROCHURE HIGHLIGHTS Name: Discovery 4 Brand Taylor Power: 500 HP Year: 2004 Double Drum: Drawworks and Sandline Drums : Self-propelled Land Rig
DIMENSIONS. Oil Capacity = 14.6 oz Maximum Fluid Temperature = 140 F Inlet Thread = 1/2 F Discharge Thread = 3/8 F
Plunger Pumps XMA 1750 RPM E VERSION 1 1/8 WITH NEMA 182-184 FLANGE FEATURING MANIFOLD: High strength forged brass for long term use. DIMENSIONS BOLTS: Eight 6mm grade 12.9. PLUNGERS: A special thick solid
Description. Rhino SD2/XD2 Type-H Control Modules. S 55-Gallon Drum with Pneumatic Changeover S 55-Gallon Drum with Electric Changeover
Description NOTE: Throughout this document, the Rhino SD2/XD2 Type-H Control Modules are referred to as the Control Module. See Figure 1. The Control Module (1) provides the pneumatic operating functions
EAGLE TUGS. Transit Pro Option. Vehicle Types: TT-4, TT-5, TT-6, & TT-8 Engine Type: Yanmar Diesel 4TNV98 Tier II & Tier III Engine Models
EAGLE TUGS Transit Pro Option Vehicle Types: TT-4, TT-5, TT-6, & TT-8 Engine Type: Yanmar Diesel 4TNV98 Tier II & Tier III Engine Models QA018 REV00 10.20.09 QA018 REV03 02.11.12 A-2 QA018 REV03 02.11.12
HAMMER UNIONS AND SWIVEL JOINTS. Sara Sae
HAMMER UNIONS AND SWIVEL JOINTS Sara Sae Quality and Innovation Sara manufactures a diverse range of oilfield equipment in its manufacturing facility in India, using the latest design techniques and CNC
AXG (FG-AXG) 5 x 6. Duplex Power Pump. Where hard work is still treasured and quality is a matter of pride. 7k-0266
AXG (FG-AXG) x Duplex Power Pump Where hard work is still treasured and quality is a matter of pride. k-0 American Mfg Company is ISO 900:00 Certified. k-0 Perry Johnson Registrars, Inc., has assessed
Appendix D Outline Dimensions
Appendix D Outline Dimensions Models 91 691 and F91 F691 Bare with Flywheel L L1 M M1 M M1 L L1 Outline Dimensions Inches (Centimeters) Model A B C D E F G H J K 91, F91 1-13/16 2-3/8 3-11/16 13/32 5/8
MODEL 5540 CONTENTS. Installation, Operation and Maintenance Instructions 1.0 GENERAL
Installation, Operation and Maintenance Instructions MODEL 5540 Sep 20 CONTENTS.0 GENERAL. Model Number---------------------------------------------------------------------------------------------------------------
V6 Vertical Pumps. Multi-Stage Pumps. Features: BOOK: MSP-010 DATE: Jan. 1, 2012
BOOK: MSP-1 DATE: Jan. 1, 212 The V6 Booster Pump is ideal for industrial/commercial applications where water pressure boosting is required. Designed with premium hydraulics for reliability and excellent
REPAIR PARTS ROBJETSU. Jets and Submersibles REPAIR PARTS FOR OBSOLETE PRODUCT
REPAIR PARTS ROBJETSU Jets and Submersibles REPAIR PARTS FOR OBSOLETE PRODUCT Index JETS J03, J05, J03N, J05N...3 JS...4 JL07N, JL0N...5 GH...6 Primeflow...7 XSH...8 VA...9 SUBMERSIBLES E... 0 4" High
Provenair Series AN Cylinders Parts List / Service Instructions
Provenair Series AN Cylinders Parts List / Service Instructions 1-1/2, 2, 2-1/2, 3-1/4 and 4 BORES EXTRUDED BARREL CONSTRUCTION 5, 6, 8 and 10 BORES TIE ROD CONSTRUCTION TYPE: Aluminum, repairable, square
Replacement Parts & Accessories Price List
Replacement Parts & Accessories Price List 680ES Gas Concrete Saw Effective January 1, 2017 I TABLE OF CONTENTS 680ES Gas Concrete Saw ITEM DESCRIPTION KEY PAGE 680GC Gas Saw Service Items n/a 1 Starter
P773-2 For Model: M773LW2 PARTS MANUAL. Marine Generators Marine Diesel Engines Land-Based Generators
P773-2 For Model: M773LW2 PARTS MANUAL Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to the
SINGLE ACTING TRIPLEX PUMP MODEL
GARDNER DENVER 15-517 4 th Edition APRIL, 2007 SINGLE ACTING TRIPLEX PUMP MODEL PZL 11 STROKE PARTS LIST MAINTAIN PUMP RELIABILITY AND PERFORMANCE WITH GENUINE GARDNER DENVER PARTS AND SUPPORT SERVICES
U2 PUMP PARTS PRICE LIST
ITEM 1 7 8 9 PUMP 180-U2 Pump Body 1 See Note 1 1 180-U2 Pump Body with Flush 1 See Note 1 1 184-U2 Pump Body 1 See Note 1 1 184-U2 Pump Body with Flush 1 See Note 1 1 220-U2 Pump Body 1 See Note 1 1 220-U2
series2500 TEXSTEAM Pumps ELECTRIC DRIVEN INJECTION PUMP PRODUCT FEATURES MODEL DESIGNATION
TEXSTEAM Pumps series2500 ELECTRIC DRIVEN INJECTION PUMP PRODUCT FEATURES Maximum discharge pressure: 6,000 PSI (1 bar) w/ 3/16 plunger Maximum volume gallons per day (52 liters per day) w/ 1/2 plunger
MODELS JG43, JG63, JG83 JG44, JG64, JG84
MODEL J STYLE G HERMETIC COMPRESSORS RENEWAL PARTS Supersedes: 180.23-RP4 (695) Form 180.23-RP4 (1298) MODELS JG43, JG63, JG83 JG44, JG64, JG84 (See Page 2 for Complete Model Nomenclature) 27531A UNIT
OPERATOR S MANUAL AND SALES AND ENGINEERING DATA
OPERATOR S MANUAL AND SALES AND ENGINEERING DATA INCLUDING: SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, PARTS, TROUBLESHOOTING. INCLUDE MANUALS: AF044X-XX Air Motor (pn 97999-1466) & S-632 General
DESCRIPTION FEATURES. facilities, pipelines, process plants and other applications where a rugged, easy to maintain proportioning pump is required.
DESCRIPTION The series 4300 chemical injectors are electric motor driven, positive displacement pumps utilizing an integral worm gear drive available in three different standard ratios and 6 plunger sizes
Airflex. Airflex DBB & DBA Brakes
36191_12pg Covers 8/11/03 6:06 PM Page 01 Airflex Airflex DBB & DBA Brakes These spring-applied, pressure released, disc style brakes develop equal torque in either direction of rotation. Their torque
MA-300M(L)(H)(M-HD)(L-HD)(H-HD) QUINTUPLEX PLUNGER PUMP
MA-300M(L)(H)(M-HD)(L-HD)(H-HD) QUINTUPLEX PLUNGER PUMP Number of Plungers... 5 Maximum Rated Speed...400 rpm Stroke Length...5.00 inches 127 mm Maximum Rated Power...300.0 hp 224 kw Maximum Rod Load 300M,
Submersible Pumps Models: ST-2037 ST-2047 ST-2047B ST-2038P ST-2040T
OPERATION AND PARTS MANUAL Submersible Pumps Models: ST-2037 ST-2047 ST-2047B ST-2038P ST-2040T Revision # 1 (11/07/05) THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES. ST-2037, 47, 47B, 38P, 40T