SOUTHWEST OILFIELD PRODUCTS, INC.
|
|
|
- Angel Hall
- 5 years ago
- Views:
Transcription
1 SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8404A FLUID END FOR BOMCO F-1600 / F-1300 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 ½ 5 5 ¼ 5 ½ 5 ¾ 6 6 ¼ 6 ½ 6 ¾ 7 MAX-P.S.I F G.P.R R.P.M F MAX-P.S.I G.P.R R.P.M NOTE: I.H.P.= INPUT HORSE POWER S.P.M.= STROKE PER MINUTE P.S.I.= POUNDS PER SQUARE INCH G.P.R.= GALLONS PER REVOLUTION *MAX P.S.I. CALCULATIONS DO NOT EXCEED MAXIMUM FLUID END PRESSURE RATINGS BASED ON 100% VOLUMETRIC EFFICIENCY AND 90% MECHANICAL EFFICIENCY Page 1 of 10
2 Page 2 of 10 7/18/16
3 Page 3 of 10 7/18/16
4 FLUID END TYPE MODEL OF PUMP SIZE OF PUMP SOUTHWEST 5000 PSI BOMCO F-1600 / F X 12 ITEM NO. PART NO. DESCRIPTION QTY. REQ D 8404A FLUID END ASSEMBLY: (CONSISTS OF ITEMS: 3,4,17,18,19,20,21,22,23,26,28,33,34,35) Y-XX LINER REFER TO GUIDE FOR ORDERING CHART ON PG. 6 FOR TYPE (G); (Y); AND FOR BORE SIZE (XX) 3 2 AJO428S LINER SEAL (ALSO AVAILABLE IN URETHANE) WEARPLATE WEARPLATE & MODULE SEAL 6 5 XX-BYY PISTON REFER TO GUIDE FOR ORDERING CHART ON PG. 6 FOR SIZE (XX) AND FOR TYPE (YY) PISTON SEAL PISTON ROD (WITH ELASTIC STOP NUT)(FOR 2-PIECE STUDDED PISTON ROD ASSEMBLY PART NO A) 3 8 API-4ESN PISTON ROD NUT SUB ROD CONNECTING STUD CWY ROD CLAMP (WITH WATER JACKET) 3 11A 1200H30 HOSE (1/2 X 30 WITH 1/2 MALE X 3/8 MALE CONNECTIONS) 3 11B 1286-CWYFP ROD CLAMP WATER MANIFOLD ASSEMBLY WITH PIPE 3 11C BOLT (7/8-9 GRADE 8 BOLT WITH LOCK NUT AND WASHER) 6 12 PONY ROD 3 13 SEE PAGE VALVE COMPLETE 6 14 SEE PAGE VALVE INSERT 6 15 SEE PAGE VALVE SPRING 6 16 SEE PAGE VALVE SEAT 6 SWTM1700 HYDRAULIC SEAT PULLER KIT COMPLETE (REFER TO TOOLS SECTION) VALVE COVER FLANGE SCREW GLAND PLUG (COMPLETE WITH PLUG SEAL, VALVE GUIDE; BUSHING; AND SCREWS) INCLUDES ITEMS 20, 21, 22, & P129 HP VALVE COVER PLUG NITRILE SEAL (ALSO AVAILABLE IN URETHANE) R VALVE GUIDE (COMPLETE WITH BUSHING #4700I) I VALVE GUIDE BUSHING (ALSO AVAILABLE IN URETHANE) VALVE GUIDE SCREW VALVE COVER STUD (WITH SW PART# HHN /4-7 HEAVY HEX NUT) 72 Page 4 of 10
5 FLUID END TYPE MODEL OF PUMP SIZE OF PUMP SOUTHWEST 5000 PSI BOMCO F-1600 / F X 12 ITEM NO. PART NO. DESCRIPTION QTY. REQ D POWER END STUD (WITH SW PART# HHN /2-8 HEAVY HEX NUT) LINER RETAINER FLANGE LINER RETAINER STUD LINER RETAINER NUT SUCTION MODULE STUD (WITH SW PART# HHN /2-8 HEAVY HEX NUT) SUCTION MANIFOLD CAP SCREW SUCTION MANIFOLD SUCTION MANIFOLD SEAL S SUCTION MODULE D DISCHARGE MODULE DOWEL PIN DISCHARGE MANIFOLD DISCHARGE MANIFOLD STUD (WITH SW PART# HHN /4-8 HEAVY HEX NUT) DISCHARGE MANIFOLD SEAL BFA BLIND FLANGE IS AVAILABLE FOR CAPPING UNUSED FLANGES ON SUCTION MANIFOLD (8590-6BFA INCLUDES BF BLIND FLANGE AND O-RING) SEE SEPARATE PG. FOR DETAILS ** POLYURETHANE SEAL AVAILABLE ** Page 5 of 10
6 SOUTHWEST 5000 PSI BOMCO F-1600/ F-1300 GUIDE TO ORDERING PISTONS LINERS LINER SEALS SIZE FAIL-SAFE DUAL-DURO BLACK CAT GRAYLOY ZIRCONIA RUBBER URETHANE 4" 76BFS 76BDD 76BBC 6390G06 AJO428S AJO428SU 4 1/4" 77BFS 77BDD 77BBC 6390G07 AJO428S AJO428SU 4 1/2" 78BFS 78BDD 78BBC 6390G08 AJO428S AJO428SU 4 3/4" 79BFS 79BDD 79BBC 6390G09 AJO428S AJO428SU 5" 81BFS 81BDD 81BBC 6390G1 6390ZIR1 AJO428S AJO428SU 5 1/4" 82BFS 82BDD 82BBC 6390G2 AJO428S AJO428SU 5 1/2" 83BFS 83BDD 83BBC 6390G3 6390ZIR3 AJO428S AJO428SU 5 3/4" 84BFS 84BDD 84BBC 6390G4 AJO428S AJO428SU 6" 85BFS 85BDD 85BBC 6390G5 6390ZIR5 AJO428S AJO428SU 6 1/4" 86BFS 86BDD 86BBC 6390G6 AJO428S AJO428SU 6 1/2" 87BFS 87BDD 87BBC 6390G7 6390ZIR7 AJO428S AJO428SU 6 3/4" 88BFS 88BDD 88BBC 6390G8 AJO428S AJO428SU 7" 89BFS 89BDD 89BBC 6390G9 6390ZIR9 AJO428S AJO428SU 2-PIECE STUDDED PISTON ROD ASSEMBLY COMPLETE ASSEMBLY PISTON ROD CONNECTING STUD SUB ROD A NOTE: DUAL-DURO AND GRAYLOY ARE REGISTERED TRADEMARKS OF SOUTHWEST OILFIELD PRODUCTS. Page 6 of 10
7 TYPE SOUTHWEST (Full Open) FULL OPEN-ROUGHNECK (Cast N Place Insert Valve) FULL OPEN-ROUGHNECK (High Temp) FULL OPEN-ROUGHNECK (w/replaceable Urethane Insert) 3 WEB DOUBLE ANGLE O-RING 3 WEB (High Temp) 3 WEB STANDARD PLATE 4 WEB 4 WEB (High Temp) VALVES & SEATS (BOMCO F-1600) VALVE INSERT SPRING STAINLESS PULLER HEAD SEAT PULLER HEAD SPRING STYLE 777-8B N/A 941 N/A SWTM4250 SPLIT JAW SWND-7V2 N/A SW L N/A SWND-7S1 SWTM40-SN SPLIT JAW SWND-7PH PANCAKE SWND-7V2HC N/A SW L N/A SWND-7S1 SWTM40-SN SPLIT JAW SWND-7PH PANCAKE SWND-7V1 SWND-7I SW L N/A SWND-7S1 SWTM40-SN SPLIT JAW SWND-7PH PANCAKE SWR SWR SWR SWR SWR SWTM3-7T SWR SWR SWR SWR SWR SWTM3-7T 3 J HOOK SWR SWR SWR SWR SWR SWTM3-7T SWU5C-EEF SWUDD-7B SW N/A SW7DD-B1 SWTM4-7 SWU5C-EEFHT SWUDD-7BHT SW N/A SW7DD-B1 SWTM4-7 4 J HOOK PANCAKE SPLIT JAW 3 J HOOK 4 J HOOK Page 7 of 10
8 ITEM NO. PART NO. DESCRIPTION QTY BF SUCTION MANIFOLD BLIND FLANGE O-RING 1 2 FRONT VIEW 1 D 1 D 2 Page 8 of 10 C C BACK VIEW B B A NOTE: 1. THIS FLANGE IS EQUAL TO EMSCO# SW PART# O-RING IS EQUAL TO EMSCO# THIRD ANGLE PROJECTION 4 UNLESS OTHERWISE SPECIFIED: DRAWN BY DATE DIMENSIONS ARE IN INCHES TOLERANCES: MG 06/13/2014 FRACTIONAL 1/64 CHECKED BY DATE ANGULAR: 0.5 DECIMAL / JM 06/17/2014 ALL FILLETS & RADII - 1/16 MAX MATERIAL CHAMFERS 1/16 X 45 MAX SURFACE FINISH 125 RMS MAX N/A CONCENTRICITY NOT TO EXCEED.005 T.I.R. BREAK SHARP CORNERS 1/32 X 45 MAX HEAT TREAT THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF SOUTHWEST OILFIELD PRODUCTS. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF SOUTHWEST OILFIELD PRODUCTS IS PROHIBITED. 3 N/A 2 SOUTHWEST OILFIELD PRODUCTS WALLISVILLE ROAD, HOUSTON,TX TITLE: SUCTION MANIFOLD BLIND FLANGE ASSEMBLY FOR SUCTION MANIFOLD SIZE DWG. NO. REV. B BFA A SHEET 1 OF 1 1 A
9 TORQUE SPECIFICATIONS FOR 8404A SOUTHWEST FLUID END ASSEMBLY FOR BOMCO F-1600 / F P.S.I. TORQUE TYPE (EXPRESSED IN FOOT-POUNDS) PART NUMBER DESCRIPTION COPPERCOTE MOLY GREASE DRY (NOT RECOMMENDED) API-4 ESN PISTON ROD NUT ROD CLAMP BOLT 150 MAXIMUM VALVE COVER STUD VALVE COVER STUD POWER END STUD SUCTION MODULE STUD SUCTION MANIFOLD CAP SCREW DISCHARGE MANIFOLD STUD NO MORE FORCE THAN ONE MAN ON 3' WRENCH/CHEATER COMBINATION Page 9 of 10
10 8404A BOMCO F-1600/F-1300 REVISION SUMMARY REVISION DATE REASON OF CHANGE REV. A 6/26/14 ADDED BFA DRAWING TO CATALOG INCLUDED NOTE ON PARTS LIST REV. B 5/25/16 ADDED 2-PIECE STUDDED PISTON PART NO A SEE PAGE 6 Southwest Oilfield Products Wallisville Road, Houston, TX Office Page 10 of 10
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE FLUID END FOR BOMCO F-1600 / F-1300 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8482-A FLUID END FOR NATIONAL 14-P-220 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8407-7A FLUID END FOR IDECO T-1600 / T-1300 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8488-1A FLUID END FOR OILWELL A-1700-PT/A-1400-PT MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8477A FLUID END FOR GARDNER DENVER PZ-11/PZ-10 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8429-7A FLUID END FOR BREWSTER B-1100-T / B-1000-T MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE MODEL I.H.P. S.P.M. LENGTH 4
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8422A FLUID END FOR EMSCO F-1000 PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 1/2 5 5 ¼ 5 ½ 5 ¾ 6 6
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8482-25A FLUID END FOR NATIONAL 14-P-220 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE 8475-5 FLUID END FOR GARDNER DENVER PZ-8 PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 1/2 5 5 ¼ 5 ½
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE 8475-5 FLUID END FOR GARDNER DENVER PZ-9 (PZJ) PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 1/2 5 5
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8432-A FLUID END FOR EWECO E-2200 PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 5 5 ½ 6 6 ½ 7 7 ½ 8 8 ½
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDALE PARTS LIST OEM STYLE FLUID END FOR EMSCO F-1600 / F-1300 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8476-25A FLUID END FOR NATIONAL 12-P-160 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8487A FLUID END FOR OILWELL A-1100-PT / A-850-PT PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 ½ 5 5
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE FLUID END FOR NATIONAL 14-P-220 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8429-A FLUID END FOR BREWSTER B-1600-T / B-1300-T MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE MODEL I.H.P. S.P.M. LENGTH 4
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8490-25ALEW FLUID END FOR LEWCO WH-2214 PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 5 5 ½ 6 6 ½ 7 7 ½
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE FLUID END FOR OILWELL HD-1700-PT/HD-1400-PT MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8412A FLUID END FOR IDECO T-800 PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 ½ 5 5 ¼ 5 ½ 5 ¾ 6 6 ¼
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE FLUID END FOR WEATHERFORD MP-10 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8477-25A FLUID END FOR GARDNER DENVER PZ-11/PZ-10 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P.
SOUTHWEST OILFIELD PRODUCTS, INC. SOUTHWEST FLUID END A FOR WIRTH TPK-1600, 7500 P.S.I. MUD PUMP EXPENDABLE PARTS LIST
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST FLUID END 8446-25A FOR WIRTH TPK-1600, 7500 P.S.I. MUD PERFORMANCE CHART LINER SIZE IN INCHES PUMP MAX MAX STROKE MODEL I.H.P.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 80-5 FLUI EN FOR OMO F-600 PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ ¾ 5 5 ½ 6 6 ¼ 6 ½ 6 ¾ 7 7 ¼ 7 ½ F-600 600
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 80-5 FLUI EN FOR OMO F-600 PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ ¾ 5 5 ½ 6 6 ¼ 6 ½ 6 ¾ 7 7 ¼ 7 ½ F-600 600
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST OEM STYLE 8475-5 FLUI EN FOR GRNER ENVER PZ-8 PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH 4 4 /2 5 5 ¼ 5 ½ 5 ¾ 6 6 ¼ 6 ½ 6 ¾
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST OL STYLE 876- FLUI EN FOR NTIONL -P-60 MU PUMP PERFORMNE HRT PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ 5 5 ¼ 5
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 8476-25LEW FLUI EN FOR LEWO W-1712 PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH 4 ½ 5 5 ½ 6 6 ½ 7 W-1712 1700 120 MU
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 8476-25 FLUI EN FOR NTIONL 12-P-160 MU PUMP PERFORMNE HRT PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH 4 ½ 4 ¾ 5 5 ¼
TABLE OF CONTENTS DESCRIPTION PAGE
TABLE OF CONTENTS DESCRIPTION PAGE BLOCK-HOOK COMBO...2 ROTARY SWIVEL...3 ROTARY TABLE...4 MKP STYLE SSW-40...5 MKF SERIES TRIPLEX MUD PUMPS... 6-8 MKP-165...9 MKP-275 TRIPLEX MUD PUMP...10 MKP-550 TRIPLEX
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 8 FLUI EN FOR GRNER ENVER PZ-/PZ-0 MU PUMP PERFORMNE HRT PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ ¼ ½ ¾ 6 6 ¼
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST OEM STYLE FLUI EN FOR GRNER ENVER PZ-/PZ-0 MU PUMP PERFORMNE HRT PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ ¼ ½ ¾ 6 6 ¼ 6
Serial #
Serial #155000-155999 January 2015 Blank page GENERATION 2 PARTS MANUAL DESCRIPTION PAGE TABLE OF CONTENTS 1 MAINFRAME ASSEMBLY 2-3 EXTENSION ARM ASSEMBLY 4-5 BASKET HANGER, FRAME, & LIFT ASSEMBLY 6-7
Pneumatic Actuator. Operation & Service Manual. Models: Original Instructions UNIBLOC PUMP MANUAL NO.: REVISION: 08/2016
Pneumatic Actuator Operation & Service Manual Models: 43004- MANUAL NO.: 43004- REVISION: 0/206 Original Instructions UNIBLOC PUMP UNIBLOC PUMP Unibloc-Pump, Inc. 0 Ashborough Road Marietta, Georgia 3006
Assembly Instructions John Deere EZ View Dust Diverter
Assembly Instructions John Deere EZ View Dust Diverter. Install hinges to bottom front (decal side), approximately from each end. Use Phillips head Screws. (See Picture #). Install 3 / or metal lip (depending
-7 & 2030G2-7 7-BAR SERIES
GENERATION 2 BASKET RAKE MODELS 2027-G2-7 & 2030G2-7 7-BAR SERIES Serial #147000-147999 PARTS MANUAL February 2014 GENERATION 2 PARTS MANUAL DESCRIPTION PAGE TABLE OF CONTENTS 1 MAINFRAME ASSEMBLY 2-3
WX510 Trailer Log Splitter Parts Manual S/N to S/N
WX0 Trailer Log Splitter Parts Manual S/N 087 to S/N 000 Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service and replacing
SERVICE MANUAL. PVR15-Manifold Series Pump. J Design Series INSTALLATION. Ordering Code PVR15 - _ RM - _ - - J
SERVICE MANUAL PVR15-Manifold Series Pump Installation, Startup, Operating Instructions, Parts Pages, Repair Procedures J Design Series This service manual applies to products with Ordering Codes like
WX370 Tractor Mount Splitter Parts Manual S/N to S/N
WX370 Tractor Mount Splitter Parts Manual S/N 3709 to S/N 37033 Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service
WX350 Tractor Mount Splitter Parts Manual. S/N & After
WX30 Tractor Mount Splitter Parts Manual S/N 600067 & After Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service and
WX960 Trailer Log Splitter Parts Manual. S/N & After
WX960 Trailer Log Splitter Parts Manual S/N 36000 & After Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service and
WX520 Trailer Log Splitter Parts Manual
EMB Manufacturing Inc. Boomer Line St. Clements, On N0B 2M0 Canada Ph: (59) 99-9283 Fax: (59) 99- www.embmfg.com WX520 Trailer Log Splitter Parts Manual S/N 2E9USES250328 & After 250328 & After Refer to
26LGC & 26LGC-L Trailer Log Splitter Parts Manual
EMB Manufacturing Inc. Boomer Line St. Clements, On N0B M0 Canada Ph: (59) 99-983 Fax: (59) 99- www.embmfg.com LGC & LGC-L Trailer Log Splitter Parts Manual S/N E9US8ES008 & After Refer to the operators
WX370 Tractor Mount Splitter Parts Manual S/N & After
WX370 Tractor Mount Splitter Parts Manual S/N 900001 & After Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service and
WX520 Trailer Log Splitter Parts Manual. S/N & After
WX0 Trailer Log Splitter Parts Manual S/N 000 & After Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service and replacing
P773-2 For Model: M773LW2 PARTS MANUAL. Marine Generators Marine Diesel Engines Land-Based Generators
P773-2 For Model: M773LW2 PARTS MANUAL Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to the
ABI-180/185 TAIL GEAR ASSEMBLY
INSTALLATION INSTRUCTIONS and INSTRUCTIONS FOR CONTINUED AIRWORTHINESS for the installation of ABI-180/185 for CESSNA AIRCRAFT SERIES 180 & 185 Doc No.: ABI 1-5 REV A 7/10/014 ABI LLC PO Box 670989 0130
PARTS MANUAL KA-3500PT PISTON TYPE PUMP INDEX
PARTS MANUAL KA-500PT PISTON TYPE PUMP INDEX - Parts Page Drawing page - Fluid End Detail page - Piston Assembly, Liner & Pony Rod Detail page - Water Manifold Assembly Detail page 5 - Oil Manifold Assembly
P844L3MS For Models: NL844L3.1MS1 and NL844L3.1MS2 PARTS CATALOG. Marine Generators Marine Diesel Engines Land-Based Generators
P844L3MS For Models: NL844L3.1MS1 and NL844L3.1MS2 PARTS CATALOG Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents
Mobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C
Mobile Cylinder Div. Standard Build Series Catalog HY18-0014/US Rev C WARNING - USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE
B/M No. B H00925 M /8-10T 3" B H00920 M /8-10T 2-1/2" Part Number. Item. No. 800B
Threaded Case (NPT), Packing Construction Page 80. Supersedes 03/0/ 87 8 B/M Mtg. Bracket Spline Ext. B00 4 H0095 M0454-3/8-0T 3" B5999 5 H0090 M07-3/8-0T -/" 7 Kit available for this model, P/N B778 for
WX980 Trailer Log Splitter Parts Manual
EMB Manufacturing Inc. Boomer Line St. Clements, On N0B M0 Canada Ph: (9) 99-983 Fax: (9) 99- www.embmfg.com WX980 Trailer Log Splitter Parts Manual S/N E9US0ES3809 & After 3809 & After Refer to the operators
WORKFORCE MUD PUMP WORKFORCE PUMP. WORKFORCE TM WWS500 Pump WORKFORCE PUMP
PUMP TM Pump MUD PUMP PUMP GLOBAL SOLUTIONS DESIGNING, MANUFACTURING AND PACKAGING FOR THE OFFSHORE INDUSTRY TM Reinforced, 36 Kip high strength, stress relieved, alloy-steel Pump Frame provides rigidity
2030G BAR SERIES
GENERATION 2 BASKET RAKE MODEL 2030G2-7-1 7-BAR SERIES Serial #147000-147999 PARTS MANUAL April 2014 GENERATION 2 PARTS MANUAL DESCRIPTION PAGE TABLE OF CONTENTS 1 MAINFRAME ASSEMBLY 2-3 EXTENSION ARM
26HVGC-L Trailer Log Splitter Parts Manual
EMB Manufacturing Inc. Boomer Line St. Clements, On N0B M0 Canada Ph: (9) 99-983 Fax: (9) 99- www.embmfg.com HVGC-L Trailer Log Splitter Parts Manual S/N E9US39S0839 & After PRINTED IN CANADA Rev: E.0
Air/Oil Tanks Air Boosters Cylinder Options Multi-Stage Triple-Rod Basic Cylinders Accessories Technical Data TRA HOW TO ORDER: SERIES TRA (TRIPLE PIS
SERIES TRA TRIPLE ROD NEW HEAVY-DUTY TRIPLE ROD DESIGN TRD s TR Series has been redesigned. The new series, TRA is a Heavy-Duty version of the TR Series. The new series is a drop-in replacement of the
WX615 Trailer Log Splitter Parts Manual. Starting with S/N to
WX Trailer Log Splitter Parts Manual Starting with S/N 8000 to 800 Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service
F-800 and F-1000 MUD PUMP Specification and Performance
This product conform to API Spec 7K, F-800 and F-1000 MUD PUMP Specification and Performance Distributed by 1. Technical Specification and performance Parameter 1.1 F-800 and F-1000 Mud Pumps Specification
MA-155M(L)(H) TRIPLEX PLUNGER PUMP...
MA-155M(L)(H) TRIPLEX PLUNGER PUMP... No. of plungers... 3 Maximum rated speed... 450 rpm Stroke length... 4.50 in. 4.3 mm Maximum rated power... 155.0 hp 5.5 kw Maximum rod load... 9087 lbs. 40.3 kn Weight
Service Manual for Hydraulic Vane Pumps Flange Mounted
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Service Manual for Hydraulic Vane Pumps Flange Mounted SM PSCF/07.03
CONTROL CHOKE SINCE1958. Unique. Precise. Quality. Reliable.
SINCE95 RB SERIES CONTROL CHOKE Unique. Precise. Quality. Reliable. RB SERIES CONTROL VALVES FEATURES Benefits The RB Series Control Valve features several unique design characteristics that minimize wear
WX540 Trailer Log Splitter Parts Manual. S/N & After
WX0 Trailer Log Splitter Parts Manual S/N 7000 & After Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service and replacing
Fast, Effective Blowout Protection
Dual or Single Ram Hydraulic BOPs Fast, Effective Blowout Protection MODEL DRH - DUAL RAM HYDRAULIC BOP Guide Rib Pipe Centering Guide Ram Rubber Pipe Ram Block Door Cylinder Locking Shaft Lip-Type Piston
PARTS MANUAL KA-3500PT PISTON TYPE PUMP INDEX
PARTS MANUAL KA-3500PT PISTON TYPE PUMP INEX - Parts Page rawing page 2 - Fluid End etail page 3 - Piston & Liner etail page 4 - Parts List page 5-10 upagro B.V. 1/10 KA-126FE KA-34 KA-38 KT-34 KA-35 upagro
T BOP. prep. TC Cooper Cameron, Cameron Division
T BOP The Cameron T blowout preventer offers a unique combination of benefits including safety, economy, reliability, extended service life, reduced height and fast and easy service. Side ram removal on
WE WROTE THE BOOK ON MUD PUMPS.
WE WROTE THE BOOK ON MUD PUMPS. AMC is a full service distributor of Weatherford Mud Pumps along with Weatherford s new Ellis Williams mud pump line. We can offer either of these pumps under our distributorship
RETSCO, Ltd. Shear Relief Valve Catalog. When Quality Counts, Count on RETSCO, Ltd. Check out our website:
RETSCO, Ltd. When Quality Counts, Count on RETSCO, Ltd Shear Relief Valve Catalog 3" 2" Check out our website: www.retscoinc.com Quick Reference for Top Level Assembly Part Number ASSEMBLY PART NUMBER
MA-40M(L)(H) TRIPLEX PLUNGER PUMP
MA-40M(L)(H) TRIPLEX PLUNGER No. of Plungers...3 Maximum Rated Speed...550 rpm Stroke Length...2.5 in. 63.5 mm Maximum Rated Power...40.0 hp 29.8 kw Maximum Rod Load...3456 lbs. 15.3 kn Weight MA-40M...750
PARTS BOOK TRIPLEX MUD PUMP WS-1300T
PARTS BOOK TRIPLEX MUD PUMP WS-1300T White Star Pump Co. 22718 Commercial Lane, Tomball, Texas 77375 2010 For parts and service contact White Star sales office 22718 Commercial Lane, Tomball, Texas 77375
WX970 Trailer Log Splitter Parts Manual
EMB Manufacturing Inc. 4144 Boomer Line St. Clements, On N0B 2M0 Canada Ph: (519) 699-9283 Fax: (519) 699-4146 www.embmfg.com WX970 Trailer Log Splitter Parts Manual S/N 2E9US1110ES370010 & After 370010
Authorized Fruitland Vacuum Products Repair Depot ST, Acheson, Alberta, Canada T7X 6A5 T: F:
Authorized Fruitland Vacuum Products Repair Depot 120 10293 276 ST, Acheson, Alberta, Canada T7X 6A5 T: 780.962.1827 F: 780.962.1830 E: sales@fraserwoods.ca www.fraserwoods.ca FM-EPI-201 www.fraserwoods.ca
Northern Pump Model D1765
PRODUCT INFORMATION PACKET Northern Pump Model 4800-20-D1765 Pump Gears Pump Shafts Pump Cylinder Bearing Plates Liner Plates Shaft Bearings Mounting Brackets Shaft Seal End Plate Pump Studs Aircraft Quality
AIR WINCH MODEL K6U. Warning! Review WINCH OPERATING PRACTICES Prior to use.
Instructions, Parts and Maintenance Manual AIR WINCH MODEL K6U Warning! Review WINCH OPERATING PRACTICES Prior to use. Always operate, inspect and maintain this winch in accordance with American National
Bulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support
Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135
XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS BOLTS: Six 6mm grade 12.9. PLUNGERS: A special thick solid ceramic for
NEECO PRODUCT CATALOGUE (FLN/FLSN)
PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY: The copy, reproduction, distribution, publication, display, modification, creation of derivative works, transmition, of any content on this catalog
Class 300, Welding Neck, Slip-On and Threaded B16.47, Ser. A. ASME B16.5 Flanges
Class 300,, Slip-On and Threaded B16.47, Ser. A ASME B16.5 Flanges Weld, Slip-On, Socket Weld, Threaded, Lap Joint, Blind. 1/2" - 24" Class 150, 300, 400, 600, 900, 1500 and 2500 NOTE: Reducing flanges
SUNNDA CORPORATION. Go Above & Beyond
SUNNDA CORPORATION Go Above & Beyond Sunnda Corporation Headquartered in the energy capital of the world - Houston, Texas, Sunnda Corporation designs, manufactures, and markets an extensive line of oil
Airflex. Airflex DBB & DBA Brakes
36191_12pg Covers 8/11/03 6:06 PM Page 01 Airflex Airflex DBB & DBA Brakes These spring-applied, pressure released, disc style brakes develop equal torque in either direction of rotation. Their torque
CENTRIFUGAL PUMPS CLOSE-COUPLED 9" FEATURES SPECIFICATIONS APPLICATIONS
FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Enclosed, cast iron design for high efficiency; hydraulically balanced for reduced
P843NSATS For Models: NL843N2, NL843NW2, and NL843NW3 PARTS CATALOG. Marine Generators Marine Diesel Engines Land-Based Generators
P843NSATS For Models: NL843N2, NL843NW2, and NL843NW3 PARTS CATALOG Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its
CENTRIFUGAL PUMPS 7.5" FRAME MOUNT SERIES FEATURES
FEATURES Volute: Ductile iron volute for heavy-duty service; back pullout design; can be rotated for ease of installation Impeller: Enclosed design for high efficiency; configured for superior NPSH characteristics;
Model 393B31. Seismic, high sensitivity, ceramic flexural ICP accel., 10 V/g, 0.1 to 200 Hz, Installation and Operating Manual
Model 393B31 Seismic, high sensitivity, ceramic flexural ICP accel., 10 V/g, 0.1 to 200 Hz, Installation and Operating Manual For assistance with the operation of this product, contact PCB Piezotronics,
Chemical Injection Pump
TEXSTEAM MX3 SERIES Chemical Injection Pump TEXSTEAM INC. Chemical Injection Pump Product Features Up to 62 gallons (235 liters) per day Lightweight Discharge pressures to 10,000 PSI (690 bars) Adjustable
SJV 3400 RPM D VERSION 3/4 WITH GAS ENGINE FLANGE DIMENSIONS
Plunger Pumps FEATURING SJV 3400 RPM D VERSION 3/4 WITH GAS ENGINE FLANGE DIMENSIONS MANIFOLD: High strength forged brass for long term use. BOLTS: Three 8mm grade 8.8. PISTONS: Ceramic coated stainless
SERVICE INSTRUCTIONS. Material Pump
TM TM SERVICE INSTRUCTIONS Material Pump 9618 DESCRIPTION Model 9618 is designed for pumping petroleum products from the original container to a desired location. Due to its non-corrosive (aluminum and
EXPLODED VIEW & PARTS LIST
SECTION 8 EXPLODED VIEW & PARTS LIST ALUMINUM, A300-*AA-****-*** 10 20 30 352 40 322 40 OPTIONAL 311 342 360 323 381 312 321 61 62 70 385 341 383 80 90 100 110 120 130 140 150 160 353 170 355 372 384 330
Mud Pump Condition Monitoring and Pulsation Control Equipment Technology. IADC Maintenance Committee Meeting
Mud Pump Condition Monitoring and Pulsation Control Equipment Technology IADC Maintenance Committee Meeting 2008-10-08 IADC Presentation Optimization of the mud pump system performance through pump condition
Features: Applications: Irrigation. Commercial. Construction. Municipal. Mining
Frame Mount 7.5" BOOK: FMT-015 DATE: Mar. 1, 2012 Features: Volute: Ductile iron for heavy-duty service. Back pullout design. Can be rotated for ease of installation. Impeller: Enclosed design for high
CB Spare parts list. Hydraulic concrete buster. CB 2500 s/n DEQ Construction Tools GmbH No
CB 2500 Spare parts list Hydraulic concrete buster CB 2500 s/n DEQ169050-2018 Construction Tools GmbH No. 3390787501 2018-11-22 General information This spare parts list applies to the following: Part
Material Specifications
5.2012.12.b 6200 Series Specifications The Flomore 6200 Series Pump line consists of a series of basic pump options all developed from a modular power unit. All units are pneumatically driven positive
PWD. PWD API 610 BB1 Single Stage Pump
PWD PWD API 610 BB1 Single Stage Pump HYDRAULIC PERFORMANCE COVERAGE FLOW (m 3 /h) 50 Hz Performance Coverage Visit our web site at www.pumpworks610.com and specify flow and performance needs and obtain
1. DRIVE COUPLINGS TO BE CUSTOMER SPECIFIED. REV 2 DCR# 410, 05/02/11 KA PART # DESCRIPTION QTY. PRICE. 8 FAS09C Flange Secondary Shut-Off Side 1
www.fruitlandmanufacturing.com FM-EPI-201 OPTIONS: A: ITEM 6 & 5 ANGLE DRIVE GEAR BOX 12 6 19 2 7 10 13 OR B: ITEM 12 HYDRAULIC MOTOR BRACKET SEE DWG.# M09C-BOM FOR MUFFLER BOM NOTES: 1. DRIVE COUPLINGS
DRILLING EQUIPMENT BRIEF INTRODUCTION
BRIEF INTRODUCTION Centrum Petroleum Machinery Limited Company (CPMC) has been proudly supplying Drilling Equipment to the oilfield since 2007. Through our Domestic and International distribution network
SMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
NOTES: MADE IN THE U.S.A. U.S. PATENT No. 5,863,128. U.S. No. 3,852,076 AND INTERNATIONAL REGISTERED TRADEMARKS
NOTES: 1. MADE IN THE U.S.A. 2. U.S. PATENT No. 5,863,128 3. U.S. No. 3,852,76 AND INTERNATIONAL REGISTERED TRADEMARKS 4. MATERIAL: GLASS FILLED POLYPROPYLENE (PP) OR POLYVINYLIDENE FLUORIDE (PVDF) OR
XMV 3400 RPM D VERSION 1 WITH GAS ENGINE FLANGE DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XMV 3400 RPM D VERSION 1 WITH GAS ENGINE FLANGE DIMENSIONS BOLTS: Eight 6mm grade 12.9. PLUNGERS: A special thick solid ceramic
LWCV ACTUATOR ASSEMBLY AND MAINTENANCE INSTRUCTIONS
LWCV ACTUATOR ASSEMBLY AND MAINTENANCE INSTRUCTIONS CANDOC LWCV ACTUATOR MANUAL COPYRIGHT 2009 CANRIG DRILLING TECHNOLOGY LTD. ALL RIGHTS RESERVED Information in this document is subject to change without
GLOBAL DRILLING SOLUTIONS, INC STOCK LIST
GLOBAL DRILLING SOLUTIONS, INC STOCK LIST Item Description Qty in Stock Lighting Equipment LED Flood Light. IECEX Certificed. Explosion proof / Zone & ; Ex d IIB T Gb; IP. / Rated voltage: 00 00VAC, 0/0Hz.
Single, oversized roller compresses a low friction hose through a full 360-degrees of rotation
Graco EP Series Peristaltic Hose Pump Technology Single, oversized roller compresses a low friction hose through a full 360-degrees of rotation More flow per revolution than conventional designs Inexpensive
DUMP BODY SPREADERS INSTALLATION INSTRUCTIONS
DUMP BODY SPREADERS INSTALLATION INSTRUCTIONS (Includes PS350 & PS400) EFFECTIVE 09/2011 Revision A 1330 76TH AVE SW CEDAR RAPIDS, IA 52404-7052 PHONE (319) 363-8281 FAX (319) 286-3350 www.highwayequipment.com