API 6A Gate Valves, Chokes, Mud Valves, Check valves, Test Units, Lubricants. WELL HEAD CATALOG

Transcription

1 1 API 6A Gate Valves, Chokes, Mud Valves, Check valves, Test Units, Lubricants. WELL HEAD CATALOG Sevilla No. 211 Fracc. Praderas de Elite Reynosa, Tamps Tel: (899)

2 2 Table of Contents Replacement Parts Page Cameron Manual Gate Valve Type F & FC 3-8 Cameron Manual Gate Valve Type FL 9-10 Cameron Hyd. Gate Valve Type FC Cameron Subsea Gate Valve AF & DF 14 McEvoy Model C Gate Valve WKM Gate Valve Model M & M Shaffer Gate Valve Type B 20 Cameron H2 Choke 21 Major OEM Choke Parts 22 Cameron Hydraulic Drilling Choke Swaco Hydraulic Drilling Choke 25 Cameron Check Valve Type MS & Type R Demco Mud Valve Type DM 28 Cameron & Oteco Mud Valve Cameron Reset Relief Valve Type B 31 Cameron Type F Cup Tester 32 Cameron Back Pressure Valve 33 Cameron Type U B.O.P Hydril B.O.P. 37 Hydril Type K Pulsation Dampener 38 Valve Lubricants & Sealants 39 Lubricant Grease Gun Koomey, Air Operated Pumps 42 Koomey High Pressure Test Unit 42

3 3 Replacement Parts for Manual Cameron Gate Valve Type F & FC Parts List 1. Hand wheel 2. Bearing cap 3. Grease fitting 4. O-Ring 5. Bearing race 6. Trust bearing 7. O-Ring(Stem adapter) 8. Stem adapter 9. Stem pin 10. Packing gland 11. Stem packing 12. Nut 13. Stud 14. Bonnet 15. Check valve 16. Grease fitting 17. Bonnet gasket 18. Stem 19. Gate 20. Retainer plate 21. Seat ring 22. Seal ring 23. Pin 24. Body 25. Seal ring 26. Body bushing 27. Guide

4 4 Replacement Parts for Cameron Gate Valves Model F& FC 1-13/16" 10-15,000 PSI Description 1-13/16" 10,000 Stainless Steel Trim 1-13/16" 10,000 Super Trim 1-13/16" 15,000 Stainless Steel Trim 1. Hand Wheel Bearing Cap Grease Fitting /16" 15,000 Super Trim 4. O-Ring Bearing Race Thrust Bearing O-Ring Stem Adapter Stem Pin Packing Gland Stem Packing Nut Stud Bonnet Check Valve Grease Fitting (F) Bonnet Gasket ) ( FC) *. Gate &Seat Assy Stem *19. Gate *20. Retainer Plate *21. Seat Ring *22. Seal Ring Pin 24. Body **. Name Plate Seal Ring Body Bushing Guide ,000 PSI Req. 2 Parts. 1 Packing, 1 Ring * Consists of item 19 (1 ea), 20 (2 ea),21 (2 ea) & 22 ( 2ea). ** Not shown on the illustration.

5 5 Description 2-1/16" 5,000 Regular Trim Replacement Parts for Cameron Gate Valves Model F& FC 2-1/16" 5-15,000 PSI 2-1/16" 5,000 Super Trim 2-1/16" 10,000 SS Trim 2-1/16" 10,000 Super Trim 2-1/16" 15,000 SS Trim 1. Hand Wheel Bearing Cap Grease Fitting /16" 15,000 Super Trim 4. O-Ring Bearing Race Thrust Bearing O-Ring Stem Adapter Stem Pin Packing Gland Stem Packing Nut Stud Bonnet Check Valve Grease Fitting (F) 17. Bonnet Gasket *. Gate & Seat Assy Stem *19. Gate *20. Retainer Plate *21. Seat Ring *22. Seal Ring Pin Body **. Name Plate Seal Ring Body Bushing Guide ,000 PSI Req. 2 Parts. 1 Packing, 1 Ring *Consists of item 19 (1 ea), 20 (2 ea),21 (2 ea) & 22 ( 2ea). **Not shown on the illustration.

6 6 Description 2-9/16" 5,000 Regular Trim Replacement Parts for Cameron Gate Valves Model F& FC 2-9/16" 5-15,000 PSI 2-9/16" 5,000 Super Trim 2-9/16" 10,000 SS Trim 2-9/16" 10,000 Super Trim 2-9/16" 15,000 SS Trim 2-9/16" 15,000 Super Trim 1. Hand Wheel Bearing Cap Grease Fitting /16" 15,000 Full SS 4. O-Ring Bearing Race Thrust Bearing O-Ring Stem Adapter Stem Pin Packing Gland Stem Packing Nut Stud Bonnet Check Valve Grease Fitting (F) Bonnet Gasket *. Gate & Seat Assy Stem *19. Gate *20. Retainer Plate *21. Seat Ring *22. Seal Ring Pin Body **. Name Plate Seal Ring Body Bushing Guide ,000 PSI Req. 2 Parts. 1 Packing, 1 Ring *Consists of item 19 (1 ea), 20 (2 ea),21 (2 ea) & 22 ( 2ea). **Not shown on the illustration.

7 7 Replacement Parts for Cameron Gate Valves Model F& FC 3-1/8" 5,000 and 3-1/16" 10-15,000 PSI 3 1/8 5,000 F & FC Regular Trim 3 1/8 5,000 F & FC Super Trim 3 1/16 10,000 F & FC S.S. Trim 3 1/16 10,000 F & FC Super Trim 3 1/16 15,000 F & FC S.S. Trim 3 1/16 15,000 F & FC Super Trim 3 1/16 15,000 F & FC Full SS w/super Trim Description qty Parts Number Parts Number Parts Number Parts Number Parts Number Parts Number Parts Number 1. Hand Wheel Bearing Cap Grease Fitting O-Ring Bearing Race Thrust Bearing O-Ring Stem Adapter Stem Pin Packing Gland Stem Packing Nut Stud Bonnet Check Valve Grease Fitting (F) (F) (F) (F) Bonnet Gasket F (FC) (FC) (FC) *. Gate & Seat Assy Stem *19. Gate *20. Retainer Plate *21. Seat Ring *22. Seal Ring Pin Body **. Name Plate Seal Ring Body Bushing Guide ,000 PSI Req. 2 Parts. 1 Packing, 1 Ring *Consists of item 19 (1 ea), 20 (2 ea),21 (2 ea) & 22 ( 2ea). **Not shown on the illustration.

8 8 Description 4-1/16" 5,000 Regular Trim Replacement Parts for Cameron Gate Valves Model F& FC 4-1/16" 5-15,000 PSI 4-1/16" 5,000 Super Trim 4-1/16" 10,000 SS Trim 4-1/16" 10,000 Super Trim 4-1/16" 15,000 SS Trim 4-1/16" 15,000 Super Trim 1. Hand Wheel /16" 15,000 SS w/super Trim 2. Bearing Cap Grease Fitting O-Ring Bearing Race Thrust Bearing O-Ring Stem Adapter Stem Pin Packing Gland Stem Packing Nut Stud Bonnet Check Valve Grease Fitting (F) 17. Bonnet Gasket *. Gate & Seat Assy Stem *19. Gate *20. Retainer Plate *21. Seat Ring *22. Seal Ring Pin Body **. Name Plate Seal Ring Body Bushing Guide ,000 PSI Req. 2 Parts. 1 Packing, 1 Ring *Consists of item 19 (1 ea), 20 (2 ea),21 (2 ea) & 22 ( 2ea). **Not shown on the illustration.

9 9 Replacement Parts for Type FL Gate Valve Parts List 1. Hand wheel 2. Grease Fitting 3. Bearing cap 4. O-Ring 5. Bearing race 6. Trust bearing 7. O-Ring 8. Stem adapter 9. Stem pin 10. Packing gland 11. Stem packing 12. Nut 13. Stud 14. Bonnet 15. Grease Fitting 16. Bonnet Gasket 17. Stem 18. Gate 19. Seat 20. Seat ring seal 21. Retainer plate 22. Dowel pin 23. Body

10 10 Replacement Parts for Cameron Gate Valves Model FL 2-1/16" 5-10,000 PSI Description 2-1/16" 5,000 Regular Trim 2-1/16" 10,000 Super Trim 2-9/16" 10,000 SS Trim 3-1/18" 5,000 Super Trim 3-1/16" 10,000 SS Trim 4-1/16" 5,000 Super Trim 1. Hand Wheel Grease Fitting Bearing Cap O-Ring Bearing Race Thrust Bearing O-Ring Stem Adapter Stem Pin Packing Gland Stem Packing Nut Stud Bonnet Check Valve 15.Grease Fitting (F) 16. Bonnet Gasket *. Gate &Seat Assy. 17. Stem Gate Seat Seal Ring Retainer Plate Pin 25. Body **. Name Plate * Consists of item 18 ( 1 ea), 19 ( 2 ea), 20 ( 2 ea) & 21 ( 1 ea) **Not shown on the illustration.

11 11 MIDCO Petroleum Parts Replacement Parts for Cameron Hydraulic Actuated Gate Valve Parts List 1. Hand wheel 2. O-Ring 3. Adjusting nut 4. O-Ring 5. Locking screw 6. Cylinder head Nut 7. Set screw 8. Blind cylinder head 9. Cylinder head stud 10. Cylinder 11. Centering pin 12. Set screw 13. Piston lock nut 14. Piston 15. O-ring 16. O-ring 17. Gland 18. Stem packing 19. Lower cylinder head 20. Relief valve 21. Bonnet nut 22. Bonnet 23. Grease fitting 24. Valve check 25. Bonnet gasket 26. Stem 27. Gate and seat assy. 28. Gate 29. Retainer plate 30. Seat ring 31. Seal ring 32. Pin 33. Lower stem 34. Bonnet stud 35. Bonnet locating pin 36. Body 37. Name plate 38. Pipe plug 39. Stem protector

12 12 Replacement Parts for Cameron Gate Valves Hydraulically Actuated Type F & FC Description 2 1/16" 5,000 H2S Trim 2 1/16" 10,000 H2S Trim 2 1/16" 15,000 H2S Trim 1. Hand Wheel O-Ring Adjusting Nut O-Ring Locking Screw Cylinder Head Nut Set Screw Blind Cylinder Head Cylinder Head Stud Cylinder Centering Pin Set Screw Piston Lock Nut Piston O-Ring O-Ring Gland Stem Packing Lower Cylinder Head Relief Valve Bonnet Nut Bonnet Grease Fitting Valve Check Bonnet Gasket Stem Gate & Seat Assy Gate Retainer Plate Seat Ring Seal Ring Pin Lower Stem Bonnet Stud Bonnet Locating Pin Body Name Plate Pipe Plug Stem Protector Lubricant

13 13 Replacement Parts for Cameron Gate Valves Hydraulically Actuated Type F & FC Description 3 1/18" 5,000 H2S Trim 3 1/16" 10,000 H2S Trim 3 1/16" 15,000 H2S Trim 4 1/16" 5,000 H2S Trim 4 1/16" 10,000 H2S Trim 1. Hand Wheel O-Ring Adjusting Nut O-Ring Locking Screw Cylinder Head Nut Set Screw Blind Cyl. Head Cylinder Head Stud Cylinder Centering Pin Set Screw Piston Lock Nut Piston O-Ring O-Ring Gland Stem Packing Lower Cylinder Head Relief Valve Bonnet Nut Bonnet Grease Fitting Valve Check Bonnet Gasket Stem Gate & Seat Assy Gate Retainer Plate Seat Ring Seal Ring Pin Lower Stem Bonnet Stud Bonnet Locating Pin Body Name Plate Pipe Plug Stem Protector Lubricant

14 14 Replacement Parts for Cameron Gate Valves Type AF Replacement Parts for Cameron Gate Valves Type DF 1 Actuator Assy DF operator Head Cylinder Plug Pipe Retainer ring Ring Retainer Plug Head O ring O ring Screw cap Screw cap Washer Washer Spacer Piston a Washer Spacer Stem Assembly Assy Spring Cartridge Piston Assy. Load Ring Stem O ring Assembly O ring Name Plate Back-Up ring Plug Cylinder Cylinder Grease fitting Ring Load O ring Packing UTW Bonnet Bonnet Packing Relief Valve Ring back-up O ring Ring Junk Seal ring Retainer ring Sleeve Check valve Ring Back-Up Grease fitting Nut Body Check Valve Gland lower Grease fitting Stuffing box nut O ring Stem adapter Retainer Ring Balancing stem Gate & Seat Assy O ring Seat Ring O ring Seal Ring O ring Retainer Plate O ring Gate Plug Pin Ring seal Spring Nut Hvy hex Dogs Stud Stem Lower Pin spirol Pin Pin dowel Gasket Pin spirol Stud U packing Body U packing Packing Back-Up ring Ring Relief valve O ring Gate & Seat Assy O ring Gate Stem Protector Retainer Plate Seat Ring Seal ring Dog Spring

15 15 McEvoy Model C Gate Valve 3000, 5000 & 10,000 PSI Replacement Parts and Complete New Valves Part Description 1.Snap Pin 2.Plate, No. of Turns 3.Handwheel 4.Bonnet Cap 5.Grease Nipple 6.Grease Seal 7.Stem Bearing 8.Bearing Keeper 9.Seal O Ring 10.Packing Adapter 11.Nut 12.Packing 13.Bonnet 14.Bleeder Ball 15.Bleeder Screw 16.Back Seat Bushing 17.Stem 18.Stud 19.Piston 20.Lift Nut 21.Seat 22.Guide Pin 23.Gate Spring 24.Gate 25.Trash Ring 26.Bonnet Gasket 27.Name Plate for Midco Valve 28.Name Plate Screw 29.Check Valve 30.Set Screw 31.Lub Fitting Sealing Compound 32.Instruction Plate ( Lubricant instruction) 33.Lub Fitting Body Filler 34.Body Dwg. ( EDCN No. 411)

16 16 Replacement Parts for McEvoy Model "C" 3,000/5,000 and 10,000 PSI 2 1/16 2 9/16 3 1/8 4 1/16 5 1/8 6 1/8 6 3/8 7 1/16 1 Snap pin Plate No turns Hand wheel Bonnet cap Grease nipple Grease seal Stem bearing Bering keeper Seal O ring Packing adapter a Packing adapter top for 10K b Washer packing adapter for 10k Nut Packing Bonnet Bleeder ball Bleeder screw Back seat bushing Stem Stud Piston Lift nut Seat See Chart See Chart See Chart See Chart See Chart See Chart See Chart See Chart 22 Guide pin Gate spring Gate See Chart See Chart See Chart See Chart See Chart See Chart See Chart See Chart 24a Gate for 10,000 PSI See Chart See Chart See Chart See Chart See Chart See Chart See Chart See Chart 25 Trash ring Bonnet gasket Name plate Name plate screw Check valve Set screw Lub Fitting Compound Instruction plate Lub fitting body filler Body Seats assemblies Standard Acting API.6A. 16 th Edition Size Alloy steel Alloy hard faced T. Carbide S.S 410 Nace S.S 410 Hard faced Alloy Steel Hard faced Colmonoy 2 1/16 23/5/10K Slip Fit /16 2/3/5/10K Press fit /16 2/3/5/10K Slip Fit /16 2/3/5/10K Press fit /8-2/3/5K & 3 1/16 10K Slip fit / Short Hub /8-2/3/5K & 3 1/16 10K Press fit / Short Hub /8-2/3/5K & 3 1/16 10K Slip fit / Long Hub /8-2/3/5K & 3 1/16 10K Press fit / Long Hub /16 2/3/5/10K Press fit / Short Hub /16 2/3/5/10K Slip fit / Long Hub /16 2/3/5/10K Press fit/ Long Hub /8 2/3/5K Press fit / Short Hub /8 2/3/5K Slip fit / Long Hub /8 2/3/5K Press fit/long Hub /8 2/3/5K New Design Slip Fit /8-10K Press fit/short Hub /8 10K New Design Slip Fit /8 2/3/5,000 Press fit /8 2/3/5/10,000 Slip Fit /8 2/3/5/10,000 Press Fit /8 2/3/5K Press Fit /3/5K Non API Bore Slip Fit Next Page trim Chart

17 17 McEvoy Model C Gate Valve, Seats and Gates Trim Chart Seats assemblies Reverse Acting API.6A. 16 th Edition Size Alloy steel Alloy hard faced T. Carbide S.S 410 Nace S.S 410 Hard faced Alloy Steel Hard faced Colmonoy 2 1/16 23/5/10K Slip Fit /16 2/3/5/10K Press fit /16 2/3/5/10K Slip Fit /16 2/3/5/10K Press fit /8-2/3/5K & 3 1/16 10K Slip fit / Short Hub /8-2/3/5K & 3 1/16 10K Press fit / Short Hub /8-2/3/5K & 3 1/16 10K Slip fit / Long Hub /8-2/3/5K & 3 1/16 10K Press fit / Long Hub /16 2/3/5/10K Press fit / Short Hub /16 2/3/5/10K Slip fit / Long Hub /16 2/3/5/10K Press fit/ Long Hub /8 2/3/5K Press fit / Short Hub /8 2/3/5K Slip fit / Long Hub /8 2/3/5K Press fit/long Hub /8 2/3/5K New Design Slip Fit /8-10K Press fit/short Hub /8 10K New Design Slip Fit /8 2/3/5,000 Press fit /8 2/3/5/10,000 Slip Fit /8 2/3/5/10,000 Press Fit /8 2/3/5K Press Fit 9 2/3/5K Non API Bore Slip Fit Gates Standard and Reverse Acting Size Alloy steel Alloy hard faced T. Carbide S.S 410 Nace S.S 410 Hard faced Alloy Steel Hard faced Colmonoy 2 1/16 2/3/5/10K Standard Acting /16-2/3/5/10K Standard Acting /8-2/3/5K Standard Acting /16 10K Standard Acting /16 2/3/5/10K Standard Acting /8 2/3/5/K New Design Standard Acting /8 10K New Design Standard Acting /8 2/3/5K Old Design Standard Acting /8 10K Old Design Standard Acting /8 2/3/5/K Standard Acting /8 2/3/5/10K Standard Acting /8 2/3/5K Standard Acting /5K Non API Bore Standard Acting /16 2/3/5/10K Reverse Acting /16 2/3/5/10K Reverse Acting /8 2/3/5K Reverse Acting /16 10K Reverse Acting /8 2/3/5/10K Reverse Acting /8 2/3/5K New Design Reverse Acting /8 10K New Design Reverse Acting /8 2/3/5K Old Design Reverse Acting /8 10K Old Design Reverse Acting /8-2/3/5K Reverse Acting /8 2/3/5/10K Reverse Acting

18 18 Replacement Parts for WKM Gate Valves Model M 2,000-5,000 PSI WP Description Trim Parts Number and size Gate & Seat Assy 1 3/4" 2 1/16" 2 9/16" 3 1/8" 4 1/16" T T-22, T T-24, T Aluminum bronze Gate Spring Inconel Seat Assy T T-22, T T-24, T T Gate Guide T T-22,T-23,T-24,T T Bonnet Crush Ring T T-22,T-23,T-24,T T Bonnet O-ring Regular Sour Gas & Oil Bonnet Stud Regular 2,000 PSI ,000 & 5,000 PSI Control Hardness 2, ,000 & 5,000 PSI Stud Nut Regular 2,000 PSI ,000 & 5,000 PSI Control Hardness 2, ,000 & 5,000 PSI Handwheel 2,000 psi ,000 & 5,000 PSI Handwheel Nut All Stem T T-22, T T-24, T T-24,T-26,T-27(17-4PH) Trust bearing Steel Bearing spacer Sleeve Packing retainer bushing Bearing retainer lock nut Bearing retainer nut WKM Valve Lubricant 102 K WKM Valve Lubricant 103 K T-21,T-22,T T-24,T T-21,T-22,T T-24,T T-21,T-22,T T-24, T T-21,T-22,T T-24,T Packing set T-21,T-22,T T-24,T High Temperature

19 19 Replacement Parts for WKM Gate Valves Model M-1" Pow-R-Seal 10,000 & 15,000 PSI WP. Description Material Part Number and Size 1 13/16" 2 1/16" 2 9/16" 3 1/16" 4 1/16" Gate & Segment T-22,T T-24,T Gate spring Inconel (All) Seat T-22, T T-24, T Gate guide SS ( All) Operating stem SS Balancing stem SS Gate nut SS Gate nut lock Screw Bonnet gasket Bonnet stud Regular 10K, T ,000 PSI, T Controlled 10K, T Hardeness 15K,T Bonnrt Stud nut Regular 10K, T ,000 PSI, T Controlled 10K, T Hardeness 15K,T Stem protector ball Packing retainer nut, balancing & oper Handwheel Stem nut Stemprotector Oper Packing ret. lock nut Trust bearing Bearing housing Cap screw Housing Weather sel Packing ret.& packig set kit, Ball. & operating Packing set kit only WKM Valve Lubricant 102 K WKM Valve Lubricant 103 K

20 20 Replacement Parts for Shaffer Model "B" * For H2S service. Only the Gate & Stem are different. ( Item 7 and 15 ) Parts for Shaffer. 15,000 psi Valve, also available Spare parts for DB Hyd. Gate valve also available. Description Qty Size 1 Body 1 4 1/16" 10, /19" 10, /16" 10, /16" 5, /8" 5, /16" 5,000 2 Seat Assy Seat O-ring Elastomeric II face seal Grease plate * Gate Bonnet gasket Bonnet Bonnet bolts Packing Assy Modular bearing Packing gland Gland O-ring * Stem Gate bushing Stem adapter Dowel pin Bering Bearing race Bearing housing Grese seal O-ring O-ring Back set test screw Plastic Inj. screw Grease fitting Handw heel Handw heel bolt Name plate Drive screw Hand wheel washer Alemite fitting Pipe plug H2S Service Use Part Number below. All other parts are the same 7 Gate Stem

21 21 Replacement Parts for Cameron H2 Choke Positive and Adjustable 1 Maximum Orifice 15,000 PSI H2 Description Std. Trim Super trim 1 Hex head bolt Washer Hand wheel Seat screw Indicator Retainer ring Bonnet nut Bonnet Plug Thumb screw Bonnet gasket Junk ring J-packing Retainer ring Needle Seat Gasket Body Name plate Drive screw Instruction plate Positive Adjustable H2 Choke Parts list Description 2 Nominal 3 Nominal 3 Nominal 4 Nominal 1 Maximum orifice 2,000 through 10,000psi 2 Maximum orifice 2,000 through 5,000psi WP 2 Maximum orifice 10,000psi WP 3 Maximum orifice 2,000 through 5,000psi WP Standard Super Standard Super trim Standard Super trim Standard Super trim trim trim trim trim trim 1 Hex Bolt or Nut Washer Hand wheel Set screw Indicator Bonnet nut Bonnet Plug Thumb screw O-ring Junk ring J packing set Retainer ring Needle Seat Gasket Body 18 Name plate Drive screw Instruction plate Back-up ring Packing only

22 22 Description Adjustable Choke Replacement Parts Stems and Seats Parts for Cameron Stems, Seats Complete Chokes Assy. Type H2 Adj. Parts for Mcevoy Stems, Seats Complete Chokes Assy. Type CH-2A and CH-2P Parts for National Stems, Seats Parts for Oil Center Tool Stems, Seats Complete Chokes Assy. Type N-60 and N-62. Parts for Thornhill-Craver Stems, Seats Parts for Gulfco Stems, Seats Description Parts for Cameron Positive Choke Replacement Parts Beans Complete repl. Parts Big John & Type D Complete Chokes Assy. Type H2 Positive. Parts for Mcevoy Complete repl. parts Complete Chokes Assy. Type CH-2P, Positive. Parts for National Type 1 Parts for Oil Center Tool Type FC-140 Complete Chokes Assy. Type N-60 and N-62. Parts for Thornhill-Craver Parts for Gulfco Description Type TC-1003-P Type TC-1945 Type TC-1017 Replacement Parts for Master Beans and Flow Beans Parts for Cameron HJ master bean Complete Chokes Assy. Honest John Flow Bean Type H2 Positive. Parts for Mcevoy U-Bot Adapter & Bean Complete Chokes Assy. Type CH-2P, Positive. Parts for Oil Center Tool FC 141-P Master Bean & Parts for Thornhill-Craver Parts for Thornhill-Craver #5 Flow Bean Type 142-P #7M Master Bean & #7 Flow Bean Type 574 Master Bean & #2-L Flow Bean Type 575.

23 23 Replacement Parts for Cameron Hydraulic Drilling Choke Item Description Item Description Item Description 1 Hydraulic Actuator 18 Screw 35 O-ring 2 Front Retainer 19 Elbow 36 Lower Stabilizer Mount 3 Gate 20 Quick-Connect 37 Upper Stabilizer Mount 4 Rear Retainer 21 Elbow 38 Cap Screw 5 Piston 22 Housing 39 Screw 6 Cover 23 Cover 40 Quick-Connect 7 Actuator Rod 24 Regulator 41 Nipple 8 Actuator Body 25 Spacer Mount 42 Nipple 9 O-ring 26 Spacer 43 Elbow 10 O-ring 27 Adapter 44 Back-Up Ring 11 O-ring 28 Tubing 45 Body 12 O-ring 29 Connector 46 Seat 13 Pipe Bushing 30 Nut 47 O-ring 14 Retainer Ring 31 Retainer Cap 48 Wear Sleeve 15 Locknut 32 Lock Washer 49 Back-Up Ring 16 Cap Screw 33 Screw UTV Packing 17 Lock Washer 34 Back-Up Ring Back-Up Ring

24 24 Cameron Hydraulic Drilling Choke 3 1/16 10,000-15,000 PSI Item Description 3 1/16 10,000 PSI 3 1/16 15,000 PSI 1 Hydraulic Actuator Front Retainer Gate Rear Retainer Piston Cover Actuator Rod Actuator Body O-ring O-ring O-ring O-ring Pipe Bushing Retaining Ring Lock Nut Cap Screw Lock Washer Screw Elbow Quick-Connect Elbow Housing Cover Regulator Spacer Mount Spacer Adapter Tubing Connector Nut Retainer Cap Lock Washer Cap Screw Back-Up Ring O-ring Lower Stabilizer Mount Upper Stabilizer Mount Cap Screw Screw Quick-Connect Nipple Nipple Elbow Back-Up Ring Body Seat O-ring Wear Sleeve Back-Up Ring UTV Packing Back-Up Ring

25 25 Swaco Super Choke Replacement Parts Description Part No. Description Part No. 1 Spool, Outlet 2-9/16"10M O-Ring Sleeve, wear 10,000 PSI O Ring Sleeve Flg. Protector Wear Pin Screw, Ferry HD Bushing Shaft O - Ring O Ring Pin, 3/ Calibration Band 1-9/16 Fully Open O - Ring Screw, Soc HD O - Ring Screw, Ferry HD Back Disk Assembly Bonnet w/ Item 13 and 19, 10,000 PSI Front Disk Assembly Pin, Back Disk Super Choke ¼ Dia Body, Choke 10,000 PSI H2S Screw, Drive Fork Turning 10,000 PSI w/item Handle, 5/8 x 16 ( Not Shown) Bearing Thrust Pin, 187 D O Ring Head, Indicator, 10,000 PSI Choke Ring, Back-Up O Ring Kit, (Item 5,7,8,14,15,16,17,20.)

26 26 MS Check Valve Replacement Parts Size & Working Pressure Standard Trim Assembly Super Trim Assembly Seat Poppet Poppet Spring Retainer Seat Spring Bonnet Gasket 1-13/16-10, /16-15, /16-20, /16-5, /16-10, Standard Trim Standard Trim 2-1/16-15, /16-20, /16-5, Super Trim Super Trim 2-9/16-10, /16-15, /16-20, /8-3, /8-5, /16-10, /16-15, Standard Trim Standard Trim 3-1/16-20, /16-3, /16-5, Super Trim Super Trim /16-10, /16-15,

27 27 Replacement Parts for Cameron Type R Check Valve Size and Pressure Trim Complete Assembly Poppet Seat Spring Seat Seal Bonnet Gasket O-Ring Packing Seat Screw 1-13/16-10,000 Regular Trim /16-10,000 Super Trim /16-10,000 SST Trim /16-15,000 Regular Trim /16-15,000 Super Trim /16-20,000 Super Trim /16-5,000 Regular Trim /16-5,000 Super Trim /16-5,000 SS /Super Trim /16-10,000 Regular Trim /16-10,000 Super Trim /16-10,000 SST Trim /16-15,000 Regular Trim /16-15,000 Super Trim /16-15,000 SST Trim /16-20,000 Super Trim /16-10,000 Regular Trim /16-10,000 Super Trim /16-15,000 Regular Trim /16-15,000 Super Trim /16-20,000 Super Trim /16-15,000 Regular Trim /16-15,000 Super Trim /16-20,000 Super Trim /8-5,000 Regular Trim /8-5,000 Super Trim /8-5,000 SST Trim /16-10,000 Regular Trim /16-10,000 Super Trim /16 10,000 SST Trim /16-5,000 Regular Trim /16-5,000 Super Trim /16-10,000 Super Trim /16-15,000 Super Trim

28 28 DEMCO DM Mud Valve Replacement Parts 2 1/8" x 2" 2,000 WP 3,000 WP 5,000 WP 2 1/8" 3" 4" 2" 2 1/8" x 2" 2 1/8" 3" 4 x 3" 4" 5 x 4" 2" 2 1/2" x 2" 3" 4" x 3" 4" 5" x 4" Stem Screw Seal Buna N Stem 304SS SS xxx 1932-xxx 1933-xxx 1931-xxx 1932-xxx 1933-xxx 1931-xxx 1932-xxx 7439-xxx Secondary Seal Buna N Stem seal Assy Buna N -011 Viton xxx 1950-xxx 1951-xxx 1949-xxx 1950-xxx 1951-xxx 1949-xxx 1950-xxx 1951-xxx Bonnet Seal Buna N xxxx-342 xxxx-427 xxxx-431 xxxx- xxxx-342 xxxx-427 Viton Gate Steel Nickel Plated Monel -003 Aluminum Bronze xxx SS -008 Wt. Lbs 2.2 Seat Ductile Iron Monel Al Bronze 316 SS 1868-xxx 1886-xxx xxx xxxx-433 xxx x xxx 1858-xxx 1886-xxx xxx xxxx xxx xxxx-433 xxxx xxx 1926-xxx xxx 1877-xxx 1878-xxx xxx 1876-xxx 1877-xxx 1878-xxx xxx Buna N-011. Viton -012, Hypalon -013 Buna N-031. Viton -032, Hypalon -033 Buna N-041. Viton -042, Hypalon -043 Buna N-081. Viton -082, Hypalon xxx 1878-xxx 2207-xxx Wt Lbs

29 29 Replacement Parts for Oteco & Cameron Mud Valve S Flex Seal Valve Assy. 1. Body 2. Cap 3. Sub 4. Gate 5. Stem Nut 6. Bonnet Assy 7. Hand wheel 8. Stem Packing 9. Stem Packing ring 10.Gate Packing 11.Wear Plate 12.O-Ring 13.Studs 14.Studs Nuts 15.Studs Including item 6 16.Nuts Including item 6 17.Grease Fitting 2,000 PSI 2" SCR 2" Flg 3" SCR 3" Flg 4" SCR 4" Flg Assy Replacement Parts for Oteco & Cameron Mud Valve S Flex Seal Valve Assy. 1. Body 2. Cap 3. Sub 4. Gate 5. Stem Nut 6. Bonnet Assy 7. Hand wheel 8. Stem Packing 9. Stem Packing Ring 10.Gate Packing 11.Wear Plate 12.O-Ring 13.Studs 14.Studs Nuts 15.Studs Including item 6 16.Nuts Including item 6 17.Grease Fitting 3,000 PSI 2" SCR 2" Flg 3" SCR 3" Flg 4" SCR 4" Flg Assy

30 30 Replacement Parts for Oteco & Cameron Mud Valve S Flex Seal Valve Assy. 1. Body 2. Cap 3. Sub 4. Gate 5. Stem Nut 6. Bonnet Assy 7. Hand wheel 8. Stem Packing 9. Stem Packing Ring 10.Gate Packing 11.Wear Plate 12.O-Ring 13.Studs 14.Studs Nuts 15.Studs Including item 6 16.Nuts Including item 6 17.Grease Fitting 5,000 PSI 2" SCR 2" Flg 3" SCR 3" Flg 4" SCR 4" Flg Assy

31 31 Replacement Parts for Cameron Type B Reset Relief Valve 2 and 3 Description P/N 1 Nut Elastic Stop Stud Adjusting Pin, Spiral Retainer, Upper Spring Indicator Screw, Self Tap Screw, Socket Head Cat Plate, Name Assembly, Cover Screw, Load Plate, Calibration O-Ring Handle, Reset Pin, Spiral Pin, Crank Pivot Spring, Reset Bearing Crank Assy Pin, Spiral Pin, Top Crank Button, Release Spring, Bottom Release Shaft, Release Bushing, Release Button Roller, Reset Crank Pin, Spiral Crank, Reset Rod, Spring Guide Keeper Spring Spring, Reset Crank Spring Load Retainer, Lower Spring Fitting, Grease Sub, Assy. Bonnet Plate Instruction Bushing, Stem Body Link, Upper Link, Lower Pin, Lower Ring, Cushing Piston Retainer, Inner Seal, Piston Inner Retainer Outer O-Ring Seal Outer Sub

32 32 Replacement Parts for F Cup- Type Tester and Complete Assemblies Top & Bottom Connection* Total load capacity** 2 3/8 Int Flush 270,000lb 3 ½ Int Flush 500,000 lb 4 ½ Int Flush 800,000 lb Casing Size 4 ½ 5 5 ½ 6 5/ /8 8 5/8 9 5/8 10 ¾ 13 3/ Weight Range lb/ft All All All All All Cap pressure Area,sq.in Part Number Complete assy Cup** Mand rel Sub O-ring * Threads per API Std. 7, box up, pin down. Testers with other thread sizes are available at extra cost. When other threads are used, a check should be made to see of total capacity of tester is reduced. ** Total load capacity equals cup pressure area times test pressure, plus weight of suspended pipe *** Cups with special reinforcing can be provided for test pressure up to 15,000 psi.

33 33 Replacement Parts for Back Pressure Valve Cameron Style Nominal Size Maximum OD H Back Pressure Valve and H and HM Two-Way Check Valve Part Numbers H Back Pressure Valve Part Number Tubing Hanger Christmas Tree H Two-Way Check Valve HM Two- Way Check Valve Tubing OD Minimum Bore BPV Threads Minimum Vertical Bore Christmas Tree Minimum Drift Dia. 1 ¼ ½ / ¾ / / ½ / / ½ / /

34 34 Cameron Ram Type B.O.P Replacement Parts Item Description Qty 7 1/16 5,000 psi Model II 1 Body 1 7-1/16 3, ,000 PSI WP U BOP Part Number 7 1/16 5,000 psi Model II 7 1/16 10,000 psi Model II 7 1/16 15,000 psi Model II 11 3,000 psi Model II 11 5,000 psi Model II 11 10,000 psi Model II 2 Intermediate Flange a Intermediate Flange shear Bonnet Ran Assembly X X x x x x x 5 Piston, Operating a Piston, Operating Shear Cylinder, Operating a Cylinder, Operating Shear Housing, Locking Screw Locking Screw a Locking Screw /Shear Piston,Ram Change/Open Piston Ram Change/Close Cylinder, Ram Change Bolt, Bonnet a Bolt, Bonnet / Shear Stud,Locking Screw Housing a Stud, Locking Screw Housing/Shear Nut, Locking Screw Housing Check Valve, Plastic Packing Screw Plastic Packing Pipe Plug Plastic packing Ring Plastic Packing Ring Plastic Energizing Seal ring Connecting Rod Ring Back-Up Seal Bonnet Pin Ram Guide O ring Operating Cylinder O ring Oper piston rod to int Flg Lip seal operating Piston Seal ring Tail Road O ring Wiping O ring ram change piston to Bonnet O ring ram change piston rod to int f O ring ram change Cyl to Int Flg O ring Ram change Cyl to bonnet O ring ram change piston O ring bonnet bolt retainer Cap Screw int Flg to Bonnet Gland Bleeder Plug Bleeder Lifting Eye Packing plastic Washer Ring retainer Wear Ring Operating Piston Space Shear

35 35 Cameron Ram Type B.O.P Replacement Parts Item Description Qty 11 15,000 psi Model 79 1 Body , /4 5,000 PSI WP U BOP Part Number 13 5/8 3,000 psi Model II 13 5/8 5,000 psi Model II 13 5/8 10,000 psi Model II 13 5/8 15,000 psi Model B 16 3/8 3,000 psi Model B 2 Intermediate Flange a Intermediate Flange shear ¾ 5,000 psi Model B 3 Bonnet Ran Assembly ( ) ( ) ( ) ( ) ( ) ( ) ( ) 5 Piston, Operating a Piston, Operating Shear Cylinder, Operating a Cylinder, Operating Shear Housing, Locking Screw Locking Screw a Locking Screw /Shear Piston,Ram Change/Open Piston Ram Change/Close Cylinder, Ram Change Bolt, Bonnet a Bolt, Bonnet / Shear Stud,Locking Screw Housing a Stud, Locking Screw Housing/Shear Nut, Locking Screw Housing Check Valve, Plastic Packing Screw Plastic Packing Pipe Plug Plastic packing Ring Plastic Packing Ring Plastic Energizing Seal ring Connecting Rod Ring Back-Up Seal Bonnet Pin Ram Guide O ring Operating Cylinder O ring Oper piston rod to int Flg Lip seal operating Piston Seal ring Tail Road O ring Wiping O ring ram change piston to Bonnet O ring ram change piston rod to int f O ring ram change Cyl to Int Flg O ring Ram change Cyl to bonnet O ring ram change piston O ring bonnet bolt retainer Cap Screw int Flg to Bonnet Gland Bleeder Plug Bleeder Lifting Eye Packing plastic Washer Ring retainer Wear Ring Operating Piston Space Shear

36 36 Cameron Ram Type B.O.P Replacement Parts Item Description Qty 16-3/4 10,000 psi Model II 1 Body /4 10, /4 3,000 PSI WP U BOP Part Number 18 ¾ 10,000 psi Model II 20 ¾ 3,000 psi Model II 21 ¼ 2,000 psi Model II 21 ¼ 5,000 psi Model II 21 ¼ 10,000 psi Model II 2 Intermediate Flange a Intermediate Flange shear Bonnet ¾ 3,000 psi Model II 4 Ran Assembly ( ) ( ) ( ) ( ) ( ) ( ) ( ) 5 Piston, Operating a Piston, Operating Shear Cylinder, Operating a Cylinder, Operating Shear Housing, Locking Screw Locking Screw a Locking Screw /Shear Piston,Ram Change/Open Piston Ram Change/Close Cylinder, Ram Change Bolt, Bonnet a Bolt, Bonnet / Shear Stud,Locking Screw Housing a Stud, Locking Screw Housing/Shear Nut, Locking Screw Housing Check Valve, Plastic Packing Screw Plastic Packing Pipe Plug Plastic packing Ring Plastic Packing Ring Plastic Energizing Seal ring Connecting Rod Ring Back-Up Seal Bonnet Pin Ram Guide O ring Operating Cylinder O ring Oper piston rod to int Flg Lip seal operating Piston Seal ring Tail Road O ring Wiping O ring ram change piston to Bonnet O ring ram change piston rod to int f O ring ram change Cyl to Int Flg O ring Ram change Cyl to bonnet O ring ram change piston O ring bonnet bolt retainer Cap Screw int Flg to Bonnet Gland Bleeder Plug Bleeder Lifting Eye Packing plastic Washer Ring retainer Wear Ring Operating Piston Space Shear

37 37 Hydril Annular Blowout Preventer Type GK and MSP

38 38 Hydril Type K Pulsation Dampener Replacement Diaphragms and Stabilizer for K-10 and K-20 Pulsation Dampeners Item Description Qty 10 Gallon 20 Gallon Wight/Lbs 1 Diaphragm Stabilizer Stabilizer Plate Screw Lock Washer Charging Hose Assy Charging Valve Gauge

39 Standard Crude Low Temp to - 75F Diesel High Temp RT To F With H2S ( Sour Crude or Gas) With Gas Well Condensates ( Per Pound ) 5 Lb Can 25 Lb Pail 120 Lb Drum 400 lb Drum 39 Valve Lubricants and Sealants for McEvoy, Cameron, WKM, Plug Valve etc. Compound Temp Range ** Principle Services Unsuitable for Regular Grade 196 McEvoy Gate Valve Sealing Compound Recommendation Chart Winter Grade S Basic Sealant Gun *** 30 to 250 F -50 to 250 F -70 to 70 F -80 to 150 F 30 to 250 F -20 to 325 F 50 to 650 F Gaseous & liquid hydrocarbons w/ <2.5% Ethane, Water Methanol Hydrocarbons w/>2.5% Ethane Gaseous & liquid hydrocarbons w/ <2.5% Ethane, Water Methanol Hydrocarbons w/>2.5% Ethane Dray Gas, Water Liquid Hydrocarbons Gaseous & Liquid Hydrocarbons Gaseous & Liquid Hydrocarbons w/ or w/o High Ethane Gaseous & Liquid Hydrocarbons w/ or w/o High Ethane, Methanol CO2 Flow & Production Water, Methanol Methanol Steam, Hot Oil Methanol, Oxidizing Atmospheres under 500F Light Liquid Hydrocarbons, Oxidizing Atmospheres over 500 F Specification Gun Packs 3 Lb. Box ( 6 Bags) Purchased Per Pound One Gallon Pail ( 8 Lbs ) Five Quart Pail ( 10 Lbs ) Three Gallon Pail ( 24 Lbs ) Five Gallon Pail ( 40 Lbs ) 55 Gallon Drum ( 440 lbs) 8 OZ Plastic Bags 16 OZ Lead Tube 13 Gallon Drum D Gun * Tank Gun Hyper Gun Tank Gun * Ten Pound ** The Temperature limits shown may vary due to difference in well effluent and pressure *** This is basic Gun and fittings. Other Fittings and hoses are available. Master Lubrication Sheet for Cameron Gate Valves McEvoy Body Grease P/N Lubricant Name Service Temperature Operation Properties Solvent Quantities ( By Part Number Available on a Standard order Basis CI-14 or TF- 41 E P P P F F Mineral Spirits NS-14 E E P P F F Mineral Spirits SS-14 or TS- 41 E P E P G G Alcohol HT-14 G F P E F F Mineral Spirits E Excellent (Recommended), F- Fair ( Not Recommended). Example for Order P/N for 25 Lbs of CI-14 or TF-41 G- Good ( Recommended ), P- Poor ( Not Recommended ).

40 40 Lubricant Guns Lubricant Grease Guns Grease Gun Part Number For efficient and controlled Plug Valve Lubrication. Handles the heaviest plug valve lubricant/ sealants. Builds pressure up to 10,000 lbs. plus. Strong, Durable Aluminum Barrel, Cast Steel Head & Collar. High Pressure Piston of Finest Lapped Steel. Positive Prime, Screw Type Plunger Assembly. Provides 20 or more Strokes without Re-Prime. Uses K Size Stick ( 1 ½ Dia x 12 long). Giant Buttonhead Coupler with Pressure Release. Hose Assembly ( ¼ I.D. x 12 long H.P. Grease Hose with Built-in Swivels or Available with ½ 27 THD Straight Swivel on one end, 5,000 PSI WP Standard.) Z-Swivel Part Number ( ¼ NPT x ½ 27 THD, ¼ NPT High Pressure TEE and 15,000 PSI Gauge with Protector for more efficient lubrication of Plug Valves. Grease Gun Part Number C For efficient and controlled Plug Valve Lubrication. Handles the heaviest plug valve lubricant/ sealants. Builds pressure up to 10,000 lbs. plus. Strong, Durable Aluminum Barrel, Cast Steel Head & Collar. High Pressure Piston of Finest Lapped Steel. Positive Prime, Screw Type Plunger Assembly. Provides 20 or more Strokes without Re-Prime. Uses Standard 14 ½ oz. grease gun cartridges. Giant Assembly ( ¼ I.D. x 12 long H.P. Grease Hose with built-in Swivels or Available with ½ 27 THD. Straight Swivel on one end, 5,000 PSI WP Standard) Z-Swivel Part Number ( ¼ NPT x ½ 27 THD, ¼ NPT High Pressure TEE and 15,000 PSI Gauge with Protector for more efficient lubrication of Plug Valves. Hydraulic Plug Valve Lubricating Gun Part Number 1699 This Specially designed high pressure handgun, light in weight( approx, 16 lbs.) is more rugged than most conventional type and meets the exacting demands of plug valve sealants. Because the grease gun is built for servicing plug valves, all parts are machined with minute accuracy. The polished hardened steel piston is perfectly fitted in the high pressure cylinder to provide absolute smoothness of operation. The 1699 gun is self-priming and can be used in any position. Because of its hydraulic principle, this gun powerful floating piston forces lubricants, sealants, liquids, packing etc. out of the gun regardless of viscosity. AIR/Hydraulic Sealant Gun Part Number 1700 For pumping all kinds of Valve Lubricants/ Sealants, Valve Stem Packing and Leak Sealing/ Thermal-Setting material to 10,000 psi max., with 100 psi, 10 cfm air. Foot-operated trigger at pump. Same quality construction as the popular Model 1699 Grease Gun. Capacity: 11 Barrel Length 16 cu. in. volume ( Standard J Size Stick, 1-3/8 Dia. X 8-3/4 Long) 20 Barrel Length 32.5 cu.in. volume ( 2- Standard J Size Sticks) ROKET 280 AIR Powered Hand Gun For Valve Lubricants and Sealants. The sealed-in air motor has a 100 to 1 pumping ratio producing 10,000 psi sealant pressure at an air pressure to the motor of 100 psi. The gun operates on an air supply pressure ranging from 70 psi to 125 psi.. It weights approx. 17 lbs. when loaded with sealant. The gun uses size K stick Sealant ( 1-1/2 Dia. X 12 Long).The forward stroke of the air motor pumps the sealant and the backstroke acts as a booster compressor to supply the necessary pressure to the forced fed priming system. The gun exhaust is at the rear of the air motor away from the operator. Comes complete with shoulder sling, 15,000 psi Gauge w/ protector, ¼ I.D. x 12 Long H.P. Grease Hose ( 5,000 PSI W.P.- Standards) w/built in swivels or available with ½ -27 THD. Straight Swivel on one end and Giant Buttonhead Coupler w/plug. Note: We Do Not recommend using valve stem packing or leak sealing material in the Roket 280. Model 90 Series Pneumatic Lube Guns Model for 5 Qt. Can ( 10 Lbs) Model for 5 Gal. or 6 Gal. Can ( 35 Lbs 50 Lbs) Model MT for 5 Gal. or 6 Gal. Can ( 35 Lbs 40 Lbs) Model for 16 Gal. Drum ( 120 Lbs 150 Lbs) The Model 90 series is a 90:1 ratio pump with a totally sealed- in 3-3/4 air motor which will provide efficient operation at an air inlet pressure of 100 psi, producing 9,000 lbs, of grease pressure. The Model 10 and 40 are furnished with 10: pneumatic tires. All models are furnished with 10 feet of 3/8 I.D. (Std.) 16,000 lb. burst High Pressure Grease Hose with 90 Dig. Swivel on one end and ¼ NPT built-in swivel on the other end, 0-15,000 psi Gauge w/protector, air shut-off valve and necessary Adaptors ready for use. Note: Specify whether for use on Plug/Ball Valves or Wellhead Gate Valves Plug/Ball Valves Setup includes a Shutoff Relief Valve and Giant Buttonhead Coupler. Wellhead Gate Valve Setup includes a Shutoff Valve and a 1714 Lube Adapter ( 1-14 THD WKM/API). Model 150 High Pressure Lubrication Grease Pump 75:1 Ratio and 140:1 Ratio Available for 16 Gallon ( 120 lb-150 lb. Drums) also available for 55 gallon ( 400 lb 450 lb Drums) The 75:1 pressure ratio pump with a sealed-in 4 air-motor is dependable and pumps lubricant at a high volume. With an air inlet pressure of 100 psi, this unit produces 7,500 lbs. of grease pressure. The 140:1 pressure ratio pump with a sealed-in 6 air-motor produces 14,000 lbs of grease pressure with an air inlet pressure of 100 psi. Both Model 150 ( 75:1) and Model 150 ( 140:1) come with a drum cover and choice of a steel or rubber follow plate.

41 41 Lubricant Guns High-Pressure Bucket Pump Model , The major components of model bucket pump assembly consist of a: Hand-operated pumping mechanism with bleed valve, relief valve, and check valve assembly. 30 pounds ( 13.6 kg.) capacity tank bolt-down cover with fill port/inspection cover The high-pressure pump is designed to deliver bulk fibrous and heavy-bodied lubricants. It can also distribute light-bodied greases. Pump Delivery The pump develops 15,000 psi ( 1034 Bars) and delivers approximately 1 ounce ( 28.4 g) of product in 16-strokes. Accessories Follower Plate High-Pressure Gauge High-Pressure Hose Assembly Giant Button-Head Coupler Standard Button-Head Coupler Standard Coupler High-Pressure Straight Swivel High-Pressure Z-Swivel Model This unit also available with the 90 Series grease pump ( Part Number SL 90-5). Follow plate optional with both units. Koomey High pressure Test Units and Air Operated Pumps High Pressure Test Units can be provided in working pressure ranges from 5,000 to 30,000 psi. These units are recommended for high pressure testing of the BOP Stacks, choke and kill lines, Christmas trees and any other of equipment requiring high pressure static testing. Air Operated Test Pumps E Series Assy. PN for 15,000 psi PN for 30,000 psi T and M Series Assy. PN for 20,000 psi PN for 30,000 psi Hydraulic Control Valve 4-Way & 2-Way Shear Type Seal Teledyne Control Valve 1 4 Way Closed Center Selector 3,000 psi WP Valvcon Control Valve 1 4-Way Selector