2.7. Limit Switches. Contents Description. E50 Heavy-Duty Factory Sealed 6P+ Switches. E50 Heavy-Duty Factory Sealed 6P+ Switches

Transcription

1 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) E50 Heavy-Duty Factory Sealed 6P+ Switches E50 Heavy-Duty Factory Sealed 6P+ Switches E50 Heavy-Duty Factory Sealed 6P+ Switches Product Description Features E50 6P+ by Eaton s electrical sector were specifically designed to withstand the penetrating properties of cutting fluids and coolants, such as those used in the automotive industry, as well as extreme shock, vibration and temperature fluctuations. The one-piece, epoxy filled switch body is prewired at the factory to ensure leak-proof, submersible performance. This unique construction positively stops fluid from finding its way to any and all critical connections. Our 6P+ switches can be ordered in separate components or as complete assembled devices. They are available with prewired 16 WG cables or miniconnectors. Standard and custom cable lengths are available. s part of the E50 line, the 6P+ switches use the same operating heads as the standard E50 plug-in models to reduce the components you need to inventory. For the most current information on this product, visit our Web site: Manufactured to take the physical and environmental abuse (including cutting fluids and chemicals) of harsh industrial environments Modular, plug-in components (head and switch body) provide application flexibility, reduced inventory and less downtime hemical resistant Viton gaskets, seals and boots are standard, and so are captive, posi-drive screws special tertiary seal on the switch body prevents fluid from entering even when the operating head is not attached ontents Description E50 Heavy-Duty Factory Sealed 6P+ Switches Product Selection ssembled Switches Standard Operating Heads Switch odies ompatible onnector ables ccessories Technical Data and Specifications ircuit Diagrams Wiring Diagrams Dimensions Drawings Online 600V rating, ridge-topped contacts and wiping action assure continuity even to logic level circuits Factory wired cable features a 350 pound pullout capacity Keyed, four direction head positioning. Standard 5 pre-travel and 90 total travel 4 10 Vac/dc LED and 10 Vac neon indicating lights available Rotary heads are field convertible W, W, or both, without special tools Page V8-T-69 V8-T-7 V8-T-73 V8-T-74 V8-T-74 V8-T-76 V8-T-77 V8-T-77 V8-T-78 Standards and ertifications UL Listed S ertified IE TUV E971605E0 E (where shown) DNGER THIS SENSOR IS NOT SFETY DEVIE ND IS NOT INTENDED TO E USED S SFETY DEVIE. This sensor is designed only to detect and read certain data in an electronic manner and perform no use apart from that, specifically no safetyrelated use. This sensor product does not include self-checking redundant circuitry, and the failure of this sensor product could cause either an energized or de-energized output condition, which could result in death, serious bodily injury, or property damage. For ustomer Service in the U.S. call ETN RE (386-73), in anada call For pplication ssistance in the U.S. and anada call V8-T-68 Volume 8 Sensing Solutions E May 013

2 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) Product Selection ssembled Switches Standard onnection is by 8 ft cable 1. ssembled Switch Lever sold separately Operating Head Type Side Rotary Spring Return djustable Spring Return E50 Heavy-Duty Factory Sealed 6P+ Switches E50 Heavy-Duty Factory Sealed 6P+ Switches, ssembled Standard Indicating Light: Switch ody: Description Single-Pole None E50S6P 1NO-1N ssembled Switch LED (4 10 Vac/dc) E50SL6P 1NO-1N Two-Pole Neon (10 Vac) None E50SN6P 1NO-1N E50S6P NO-N ssembled Switch 1 onnection options (add the code suffix from the table below to the end of the catalog number): Option ode Suffix For operating head specifications, see Page V8-T-7. 3 W (clockwise) and W (counterclockwise) operation, easily convertible to W only or W only operation. 4 For a full selection of connector cables, see Tab 10, section LED (4 10 Vac/dc) E50SL6P NO-N Neon (10 Vac) E50SN6P NO-N Side Rotary (requires an operating lever, see Page V8-T-80) Standard spring E50R16P E50LR16P E50NR16P E50R16P E50LR16P E50NR16P return E50DR1 3 Low force spring E50L16P E50LL16P E50NL16P E50L16P E50LL16P E50NL16P return E50DL1 3 Maintained twoposition E50DM1 Side Pushbutton Spring return E50DS1 djustable spring return E50DS ircuit Diagrams, see Page V8-T-77. E50M16P E50LM16P E50NM16P E50M16P E50LM16P E50NM16P E50S16P E50LS16P E50NS16P E50S16P E50LS16P E50NS16P E50S6P E50LS6P E50NS6P E50S6P E50LS6P E50NS6P Mini-connector 4 Single-pole (5-pin mini-connector) SMS5D5Y160 Two-pole (9-pin mini-connector) SMS9D9Y160 able connection 1 ft cable length (standard) 1 0 ft cable length (standard) 0 Other lengths (special order) Length in ft.7 Volume 8 Sensing Solutions E May V8-T-69

3 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) E50 Heavy-Duty Factory Sealed 6P+ Switches onnection is by 8 ft cable 1. ssembled Switch Lever sold separately Operating Head Type Side Push Roller Side Pushbutton Spring Return djustable Spring Return E50 Heavy-Duty Factory Sealed 6P+ Switches, ssembled Standard, continued Indicating Light: Switch ody: Description Single-Pole None E50S6P 1NO-1N ssembled Switch LED (4 10 Vac/dc) E50SL6P 1NO-1N 1 onnection options (add the code suffix from the table below to the end of the catalog number): Option ode Suffix For operating head specifications, see Page V8-T-7. 3 Roller can be converted in the field between horizontal and vertical. 4 For a full selection of connector cables, see Tab 10, section Two-Pole Neon (10 Vac) None E50SN6P 1NO-1N E50S6P NO-N ssembled Switch LED (4 10 Vac/dc) E50SL6P NO-N Neon (10 Vac) E50SN6P NO-N Side Push Roller Spring return E50S36P E50LS36P E50NS36P E50S36P E50LS36P E50NS36P E50DS3 3 Side Pushbutton Maintained E50DH1 Top Pushbutton Spring return E50DT1 djustable spring return E50DT ircuit Diagrams, see Page V8-T-77. E50H16P E50LH16P E50NH16P E50H16P E50LH16P E50NH16P E50T16P E50LT16P E50NT16P E50T16P E50LT16P E50NT16P E50T6P E50LT6P E50NT6P E50T6P E50LT6P E50NT6P Mini-connector 4 Single-pole (5-pin mini-connector) SMS5D5Y160 Two-pole (9-pin mini-connector) SMS9D9Y160 able connection 1 ft cable length (standard) 1 0 ft cable length (standard) 0 Other lengths (special order) Length in ft V8-T-70 Volume 8 Sensing Solutions E May 013

4 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) onnection is by 8 ft cable 1. ssembled Switch Lever sold separately Operating Head Type Top Push Roller Wobble Head, Spring Return E50 Heavy-Duty Factory Sealed 6P+ Switches E50 Heavy-Duty Factory Sealed 6P+ Switches, ssembled Standard, continued Indicating Light: Switch ody: Description Top Push Roller Spring return E50DT3 Single-Pole None E50S6P 1NO-1N ssembled Switch LED (4 10 Vac/dc) E50SL6P 1NO-1N 1 onnection options (add the code suffix from the table below to the end of the catalog number): Option ode Suffix For operating head specifications, see Page V8-T-7. 3 For a full selection of connector cables, see Tab 10, section Two-Pole Neon (10 Vac) None E50SN6P 1NO-1N E50S6P NO-N ssembled Switch LED (4 10 Vac/dc) E50SL6P NO-N Neon (10 Vac) E50SN6P NO-N E50T36P E50LT36P E50NT36P E50T36P E50LT36P E50NT36P Wobble Head, Spring Return (requires a wobble operator, see Page V8-T-80) Standard duty E50DW1 E50W16P E50LW16P E50NW16P E50W16P E50LW16P E50NW16P Heavy-duty high strength steel E50DW ircuit Diagrams, see Page V8-T-77. E50W6P E50LW6P E50NW6P E50W6P E50LW6P E50NW6P Mini-connector 3 Single-pole (5-pin mini-connector) SMS5D5Y160 Double-pole (9-pin mini-connector) SMS9D9Y160 able connection 1 ft cable length (standard) 1 0 ft cable length (standard) 0 Other lengths (special order) Length in ft.7 Volume 8 Sensing Solutions E May V8-T-71

5 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) E50 Heavy-Duty Factory Sealed 6P+ Switches Operating Heads Side Rotary Spring Return djustable Spring Return Side Push Roller Side Pushbutton Spring Return djustable Spring Return E50 Heavy-Duty Factory Sealed 6P+ Switches, Operating Heads Description Travel to Operate ontacts Travel to Reset ontacts Total Travel Force to Operate ontacts Minimum Return Force Operating Temperature 1 Without able With Pre-wired able 1 Temperature ranges below 3 F (0 ) are based on absence of freezing moisture or water. W (clockwise) and W (counterclockwise) operation, easily convertible to W only or W only operation. 3 For W and W operation. For W only or W only operation, high temperature limit increases to 50 F (11 ) without cable, and 1 F (105 ) with pre-wired cable. 4 Roller can be converted in the field between horizontal and vertical. 5 Roller shaft is 0.38 in (9.5 mm) longer on E50DS4, see Dimensions on Page V8-T-78. atalog Number Side Rotary (requires an operating lever, see Page V8-T-80) Standard spring return in-lbs 4.5 in-oz 10 to 00 F 10 to 00 F E50DR1 ( 1 to 94 ) 3 ( 1 to 94 ) 3 Low temperature in-lbs 4.5 in-oz 40 to 175 F spring return ( 40 to 79 ) 31 to 175 F ( 34 to 79 ) E50DR19 Low force spring return in-lbs.5 in-oz 10 to 00 F ( 1 to 94 ) 3 10 to 00 F ( 1 to 94 ) 3 E50DL1 Maintained two-position in-lbs 14 to 00 F ( 10 to 94 ) Side Pushbutton Spring return in in 0.50 in 4 lbs 8 oz 14 to 00 F ( 10 to 94 ) djustable spring return in in 0.50 in 4 lbs 8 oz 14 to 00 F ( 10 to 94 ) Side Push Roller Spring return in in 0.50 in 4 lbs 8 oz 14 to 00 F ( 10 to 94 ) in in 0.50 in 4 lbs 8 oz 14 to 00 F ( 10 to 94 ) Side Pushbutton Maintained 0.00 in in 0.30 in 5 lbs 5 lbs 14 to 00 F ( 10 to 94 ) Top Pushbutton Spring return in 0.00 in 0.80 in 4 lbs 8 oz 14 to 50 F ( 10 to 11 ) djustable spring return in 0.00 in 0.80 in 4 lbs 8 oz 14 to 50 F ( 10 to 11 ) 14 to 00 F ( 10 to 94 ) 14 to 00 F ( 10 to 94 ) 14 to 00 F ( 10 to 94 ) 14 to 00 F ( 10 to 94 ) 14 to 00 F ( 10 to 94 ) 14 to 00 F ( 10 to 94 ) 14 to 1 F ( 10 to 105 ) 14 to 1 F ( 10 to 105 ) E50DM1 E50DS1 E50DS E50DS3 5 E50DS4 5 E50DH1 E50DT1 E50DT V8-T-7 Volume 8 Sensing Solutions E May 013

6 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) Top Push Roller Wobble Head, Spring Return Switch odies Pre-Wired able Mini-onnector E50 Heavy-Duty Factory Sealed 6P+, Switch odies able ircuit Switch ody onstruction Length See listing of compatible connector cables on Page V8-T Temperature ranges below 3 F (0 ) are based on absence of freezing moisture or water. E50 Heavy-Duty Factory Sealed 6P+ Switches E50 Heavy-Duty Factory Sealed 6P+ Switches, Operating Heads, continued Travel to Travel to Force to Minimum Operating Temperature 1 Operate Reset Total Operate Return With Description ontacts ontacts Travel ontacts Force Without able Pre-Wired able Top Push Roller Spring return in 0.00 in 0.80 in 4 lbs 8 oz 14 to 50 F ( 10 to 11 ) Wobble Head, Spring Return (requires a wobble operator, see Page V8-T-80) Standard duty in-lbs.4 in-oz 14 to 50 F ( 10 to 11 ) Heavy-duty high strength steel in-lbs.4 in-oz 14 to 50 F ( 10 to 11 ) ircuit Diagrams, see Page V8-T-77. Pre-Wired able Single-pole 1NO-1N Without indicating light 8 ft E50S6P 1 ft E50S6P1 0 ft E50S6P0 With LED indicating light 4 10 Vac/dc 8 ft E50SL6P 1 ft E50SL6P1 0 ft E50SL6P0 With neon indicating light 10 Vac 8 ft E50SN6P 1 ft E50SN6P1 0 ft E50SN6P0 Two-pole NO-N Without indicating light 8 ft E50S6P 1 ft E50S6P1 0 ft E50S6P0 With LED indicating light 4 10 Vac/dc 8 ft E50SL6P 1 ft E50SL6P1 With neon indicating light 10 Vac 8 ft E50SN6P 1 ft E50SN6P1 0 ft E50SN6P0 Mini-onnector Single-pole 1NO-1N Without indicating light normal wiring E50S6P Without indicating light alternate wiring E50S6P-W With LED indicating light 4 10 Vac/dc E50SL6P With neon indicating light 10 Vac E50SN6P Two-pole NO-N Without indicating light E50S6P With LED indicating light 4 10 Vac/dc E50SL6P With neon indicating light 10 Vac E50SN6P 14 to 1 F ( 10 to 105 ) 14 to 1 F ( 10 to 105 ) 14 to 1 F ( 10 to 105 ).7 atalog Number E50DT3 E50DW1 E50DW Volume 8 Sensing Solutions E May V8-T-73

7 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) E50 Heavy-Duty Factory Sealed 6P+ Switches ompatible onnector ables Mini-Style, Straight Female ccessories E50KH1M E50KH7 Standard ables 1 urrent Voltage Rating at 600V Style Number of Pins Gauge Length E50 Heavy-Duty Factory Sealed 6P+ Switch ccessories Note 1 For a full selection of connector cables, see Tab 10, section Pin onfiguration/wire olors (Face View Female Shown) Mini-Style, Straight Female 8 5-pin 16 WG 6 ft (m) 1-White SMS5D5Y160 -Red 3-Green 4-Orange 5-lack 7 9-pin 16 WG 1 ft (4m) 1-Orange SMS9D9Y160 -lue 3-Red/lack 4-Green/lack 5-White 6-Red 7-Green 8-White/lack 9-lack dapter Plate llows E50 to replace Eaton s Type LP Manifold Mounting Plug-In Limit Switch llows E50 to replace Square D Type W Surface Mounting Non Plug-In Standard ox Limit Switch Dimensions, see Page V8-T-78. E50KH1M E50KH7 V8-T-74 Volume 8 Sensing Solutions E May 013

8 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) E50KH4 E50KH5 E50KH E50KH10 E50KH3 E50KH6 E50 Heavy-Duty Factory Sealed 6P+ Switches E50 Heavy-Duty Factory Sealed 6P+ Switch ccessories, continued dapter Plate, continued llows E50 to replace National cme, Type D-100M, Style Mounting. Denison LoxSwitch, Model L-100W, Style Mounting. Square D 9007 Type T, Style Mounting. (dapter plate is 1/8 in thick, with 1/4 in mounting holes.) Namco long mount. llows E50 to replace National cme, Type D-100M, Style 1 Mounting. Denison LoxSwitch, Model L-100W, Style 1 Mounting. Square D 9007 Type T, Style Mounting. (dapter plate is 1/8 in thick, with 1/4 in mounting holes.) llows E50 to replace Eaton s Type LT Non Plug-In Two-Pole Limit Switch llows E50 to replace llen-radley 80M Sealed Limit Switch djustable Mounting Plate This is a mounting plate only 5/16 in thick and includes the proper mounting bolts and nuts. The slots in the plate allow a maximum horizontal adjustment of 1 in and vertical adjustment of 1-1/4 in Note 1 Limit switch not included. E50KH4 1 E50KH5 1 E50KH E50KH10 E50KH3 1 onduit Sealing Nut 1/ in oiltight E50KH6 Dimensions, see Page V8-T Volume 8 Sensing Solutions E May V8-T-75

9 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) E50 Heavy-Duty Factory Sealed 6P+ Switches Technical Data and Specifications E50 Heavy-Duty Factory Sealed 6P+ Switches Description Environmental ratings Material of construction Switch gasket material Universal U.S./DIN mounting dimensions onduit entrance ontact ratings ontact operation ontact material Maximum frequency of operation Mechanical life Side rotary Side or top push Electrical life Single-pole Double-pole mbient temperature range standard Standard without cable Standard with cable Low temperature without cable Low temperature with cable Repeat accuracy standard Side operated Top operated Side rotary Torque requirements Operating head screws Electrical Data Maximum ontact Ratings (Same polarity each pole) urrent, mperes Voltamperes Volts Note 1 Thermal rating. Valid only if switch does not have to make or break. Specification NEM 1, 3, 3S, 4, 4X, 6, 6P, 13, IP67, IP69K Zinc die cast Viton 1.16 in (30 mm) x.34 in (60 mm) 1/ in NPT or 0 mm threading See below Snap action over center mechanism Fine silver 8000 operations per hour 13,000,000 operations minimum 10,000,000 operations minimum 1,000,000 operations typical at full load 100,000 operations typical at full load 14 to 50 F ( 10 to 11 ) 14 to 1 F ( 10 to 105 ) 40 to 50 F ( 40 to 11 ) 40 to 1 F ( 40 to 105 ) Within in Within in Within in lb-in Make reak ont. 1 Make reak D Volts urrent, mperes Max. Make or reak ont. 1 ll Switches Except Gravity Return and Indicating Light Versions NEM 600 Rating NEM R Switches with Indicating Lights (LED or Neon) NEM 150 Rating NEM R V8-T-76 Volume 8 Sensing Solutions E May 013

10 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) ircuit Diagrams 1 Standard ssembled Switches Single-Pole 1NO-1N Must be same polarity. Switch odies Pre-Wired able Single-Pole 1NO-1N E50S6P_ E50SL6P_ Wiring Diagrams 1 Mini-onnector Single-Pole 1NO-1N E50 Heavy-Duty Factory Sealed 6P+ Switches Two-Pole NO-N Same polarity, each pole. Pre-Wired able Two-Pole NO-N E50S6P_ E50S6P E50S6P-W E50SL6P/E50SN6P Mini-onnector Two-Pole NO-N E50S6P E50SL6P/E50SN6P Note 1 The wire colors referenced on these diagrams are those internal to the switch itself. E50SL6P_.7 Volume 8 Sensing Solutions E May V8-T-77

11 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) E50 Heavy-Duty Factory Sealed 6P+ Switches Dimensions pproximate Dimensions in Inches (mm) Standard 6P+ Limit Switch with Rotary Operating Head 0.31 (8.0) 1.58 (40.1).5 (57.0) 1.44 (37.0) Side Push Operators pproximate Dimensions in mm [in] Pushbutton djustable Pushbutton Maintained Pushbutton Top Push Operators Pushbutton 0.81 (1.0) 0.37 (9.4) Dia. 0.0 (5.0) Front Mtg. Hole 4. (107.0) 3.13 (79.0) 1.13 (8.7) onduit Entrance 0.50 Pipe Tap Wobble Operators See Operators on Page V8-T (19.0) (6.) 0.0 (5.) (5.0) 1.54 (39.0) 0.75 (19.0).74 (69.5) 0.45 (11.4) [10-3] Tap 0.38 (10.0) Deep Rear Mtg. Holes () djustable Pushbutton Roller Roller 3 1 an accommodate both U.S., 1.16 (9.4) x.34 (59.5) and DIN, 1.18 (30.0) x 3.6 (60.0), mounting dimensions. For E50DS4. 3 For E50DS3. V8-T-78 Volume 8 Sensing Solutions E May 013

12 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) ccessories pproximate Dimensions in mm [in] dapter Plates E50KH1M E50KH7 E50KH4 E50KH5 E50KH E50KH10 djustable Mounting Plate E50KH3 E50 Heavy-Duty Factory Sealed 6P+ Switches 59.5 [.340] 76 [3.00] 39 [1.54] 9.5 [1.160] 5. [0.04] DI. ( HOLES) #10-3 UN- HOLE 4.8 [0.19] THIK 13.5 [0.531].7 Volume 8 Sensing Solutions E May V8-T-79

13 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) Operators Operators Operators Product Description The Operators presented here are used with Eaton s E50 Plug-In and 6P+ limit switches, as well as our rotary type limit switches. wide variety of styles and sizes are available to provide optimum performance for nearly any application. For the most current information on this product, visit our Web site: Features Wide variety of operator types for rotary and wobble style limit switches Rollers and rods available in metal and nonmetal contact surfaces ontents Description Operators Product Selection Roller Type Operators Rod Type Operators Wobble Type Operators Dimensions Drawings Online DNGER THIS SENSOR IS NOT SFETY DEVIE ND IS NOT INTENDED TO E USED S SFETY DEVIE. This sensor is designed only to detect and read certain data in an electronic manner and perform no use apart from that, specifically no safetyrelated use. This sensor product does not include self-checking redundant circuitry, and the failure of this sensor product could cause either an energized or de-energized output condition, which could result in death, serious bodily injury, or property damage. Page V8-T-81 V8-T-83 V8-T-84 V8-T-84 For ustomer Service in the U.S. call ETN RE (386-73), in anada call For pplication ssistance in the U.S. and anada call V8-T-80 Volume 8 Sensing Solutions E May 013

14 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) Product Selection Roller Type Operators For rotary head switches: E50 Plug-In, E50 6P+, and Note: Only operators with Nylatron rods or rollers should be used with explosion-proof limit switches. E50KL00 E50KL355 E50KL377 E50KL554 E50KL580 E50KL4 E50KL7 Operators Roller Type Roller Type Minimum Required Return Torque 1 pproximate Dimensions in Inches (mm) Lever Length Roller Diameter 1 aution: When selecting lever, the minimum required return torque of lever should not exceed minimum return force available in operating head as given in operating head specifications. Length from the operating shaft axis to the roller axis (or to the tip for non-roller operators). Operators Roller Width D E F.8 atalog Number Standard Roller (Stainless Steel) Metal 0.6 in-oz 0.88 (.) 0.75 (19.0) 0.3 (8.1) 0.31 (7.9) 0.0 (5.1) 0.4 (6.1) E50KL39 Metal 0.95 in-oz 1.38 (34.9) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) E50KL40 all bearing 0.77 in-oz 1.50 (38.1) 0.69 (17.5) 0.5 (6.4) 0.34 (8.6) 0.05 (1.3) 0.11 (.8) E50KL531 Nylatron 0.53 in-oz 1.50 (38.1) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) E50KL00 Metal 1.10 in-oz 1.50 (38.1) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) E50KL355 Nylatron 0.96 in-oz 1.50 (38.1) 0.75 (19.0) 1.00 (5.4) 0.34 (8.6) 0.83 (1.1) 0.83 (1.1) E50KL377 Without roller 0.3 in-oz 1.50 (38.1) 0.34 (8.6) E50KL3 all bearing 1.10 in-oz.00 (50.8) 0.69 (17.5) 0.5 (6.4) 0.34 (8.6) 0.05 (1.3) 0.11 (.8) E50KL55 Nylatron 0.71 in-oz.00 (50.8) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) E50KL546 Metal 1.50 in-oz.00 (50.8) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) E50KL549 Nylatron 1.45 in-oz.00 (50.8) 0.75 (19.0) 1.00 (5.4) 0.34 (8.6) 0.83 (1.1) 0.83 (1.1) E50KL57 all bearing 1.50 in-oz.50 (63.5) 0.69 (17.5) 0.5 (6.4) 0.34 (8.6) 0.05 (1.3) 0.11 (.8) E50KL553 Nylatron 1.00 in-oz.50 (63.5) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) E50KL547 Metal.00 in-oz.50 (63.5) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) E50KL550 Nylatron 1.80 in-oz.50 (63.5) 0.75 (19.0) 1.00 (5.4) 0.34 (8.6) 0.83 (1.1) 0.83 (1.1) E50KL573 Nylatron 1.40 in-oz.50 (63.5) 1.50 (38.1) 0.8 (7.1) 0.34 (8.6) 0.11 (.8) 0.17 (4.3) E50KL575 all bearing 1.80 in-oz 3.00 (76.) 0.69 (17.5) 0.5 (6.4) 0.34 (8.6) 0.05 (1.3) 0.11 (.8) E50KL554 Nylatron 1.30 in-oz 3.00 (76.) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) E50KL548 Metal.50 in-oz 3.00 (76.) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) E50KL551 Nylatron.30 in-oz 3.00 (76.) 0.75 (19.0) 1.00 (5.4) 0.34 (8.6) 0.83 (1.1) 0.83 (1.1) E50KL574 Nylatron 1.80 in-oz 3.00 (76.) 1.50 (38.1) 0.8 (7.1) 0.34 (8.6) 0.11 (.8) 0.17 (4.3) E50KL576 Dimensions, see Page V8-T-84. Roller On Reverse Side (Stainless Steel) all bearing 0.77 in-oz 1.50 (38.1) 0.69 (17.5) 0.5 (6.4) 0.34 (8.6) 0.18 (4.6) 0.4 (6.1) E50KL580 Nylatron 0.53 in-oz 1.50 (38.1) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.7 (6.9) 0.31 (7.9) E50KL310 Metal 1.10 in-oz 1.50 (38.1) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.7 (6.9) 0.31 (7.9) E50KL579 Nylatron 0.96 in-oz 1.50 (38.1) 1.50 (38.1) 0.8 (7.1) 0.34 (8.6) 0.3 (5.8) 0.31 (7.9) E50KL536 Offset Inboard Roller (Stainless Steel) Nylatron 0.65 in-oz 1.50 (38.1) 0.75 (19.0) 0.3 (8.1) 0.03 (0.8) E50KL4 Metal 1.0 in-oz 1.50 (38.1) 0.75 (19.0) 0.3 (8.1) 0.03 (0.8) E50KL5 all bearing 0.90 in-oz 1.50 (38.1) 0.69 (17.5) 0.5 (6.4) 0.04 (1.0) E50KL6 Offset Outboard Roller (Stainless Steel) Nylatron 0.65 in-oz 1.50 (38.1) 0.75 (19.0) 0.3 (8.1) 0.03 (0.8) E50KL7 Metal 1.0 in-oz 1.50 (38.1) 0.75 (19.0) 0.3 (8.1) 0.03 (0.8) E50KL8 all bearing 0.90 in-oz 1.50 (38.1) 0.69 (17.5) 0.5 (6.4) 0.04 (1.0) E50KL9 Nylatron 1.10 in-oz 1.50 (38.1) 0.75 (19.0) 1.00 (5.4) E50KL30 Dimensions, see Page V8-T-85. Volume 8 Sensing Solutions E May V8-T-81

15 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) Operators Note: Only operators with Nylatron rods or rollers should be used with explosion-proof limit switches. E50KL53 E50KL340 E50KL01 E50KL537 E50KL545 E50KL54 Operators Roller Type, continued Minimum pproximate Dimensions in Inches (mm) Required Roller Type Return Torque 1 Lever Length Roller Diameter Roller Width D E F 1 aution: When selecting lever, the minimum required return torque of lever should not exceed minimum return force available in operating head as given in operating head specifications. Length from the operating shaft axis to the roller axis (or to the tip for non-roller operators). 3 Maximum length dimension between operating shaft axis to roller axis for comparison. Precision adjustable to lesser dimensions. 4 pplies when lever is extended to the maximum dimension. 5 y reassembling lever, minimum length can be reduced another 0.5 in (1.7 mm). 6 High-grade stainless steel. atalog Number antam Lever Metal 0.45 in-oz 0.69 (17.5) 0.85 (.0) 0.18 (4.6) E50KL53 Precision djustment Nylatron 0.65 in-oz 0.69 (17.5) 0.75 (19.0) 0.3 (8.1) 0.48 (1.) 0.4 (6.1) 0.8 (7.1) E50KL340 Metal 1.0 in-oz Roller length: 1.50 (38.1) (19.0) 0.3 (8.1) 0.48 (1.) 0.4 (6.1) 0.8 (7.1) E50KL465 all bearing 0.90 in-oz 0.69 (17.5) 0.5 (6.4) 0.48 (1.) 0.16 (4.1) 0. (5.6) E50KL535 Dimensions, see Page V8-T-85. djustable Roller (Stainless Steel) all bearing.50 in-oz (5.4) to 0.69 (17.5) 0.5 (6.4) 0.3 (5.8) 0.30 (7.6) E50KL539 Nylatron 1.90 in-oz (95.) (19.0) 0.3 (8.1) 0.9 (7.4) 0.33 (8.4) E50KL (19.0) 0.3 (8.1) 0.9 (7.4) 0.33 (8.4) E50KL01SPL 6 Metal 3.40 in-oz (19.0) 0.3 (8.1) 0.9 (7.4) 0.33 (8.4) E50KL538 Nylatron 1.90 in-oz (19.0) 0.50 (1.7) 0.46 (11.6) 0.48 (1.) E50KL599 Nylatron 3.10 in-oz (19.0) 1.00 (5.4) 0.90 (.9) 0.95 (4.1) E50KL537 Large Nylatron 4.50 in-oz (1.7) to 4.00 (10.0) 0.11 (.8) 0.11 (.8) 0.19 (4.8) E50KL (8.6) Without roller 1.0 in-oz (1.7) to E50KL (95.) Nylatron.50 in-oz (41.3) to 3.75 (95.) (38.1) 0.9 (7.4) 0.6 (6.6) 0.3 (8.1) E50KL443 Dimensions, see Page V8-T-86. Operators Roller Type, continued Minimum pproximate Dimensions in Inches (mm) Required Return Roller Type Torque 1 Lever Length Roller Diameter Roller Width D E F G atalog Number Fork Lever oth Rollers on One Side all bearing 1.50 (38.1) 0.69 (17.5) 0.5 (6.4) 0.08 (.0) 0.14 (3.6) E50KL545 Nylatron 0.75 (19.0) 0.3 (8.1) 0.16 (4.1) 0,0 (5.1) E50KL04 Metal 0.75 (19.0) 0.3 (8.1) 0.16 (4.1) 0,0 (5.1) E50KL544 Nylatron 0.75 (19.0) 1.00 (5.4) 0.84 (1.3) 0.88 (.4) E50KL543 Fork Lever One Roller Outside, One Inside all bearing 1.50 (38.1) 0.69 (17.5) 0.5 (6.4) 0.08 (.0) 0.14 (3.6) 0.64 (16.3) 0.70 (17.8) E50KL54 Nylatron 0.75 (19.0) 0.3 (8.1) 0.16 (4.1) 0.0 (5.1) 0.73 (18,5) 0.77 (19.6) E50KL03 Metal 0.75 (19.0) 0.3 (8.1) 0.16 (4.1) 0.0 (5.1) 0.73 (18,5) 0.77 (19.6) E50KL541 Dimensions, see Page V8-T-86. V8-T-8 Volume 8 Sensing Solutions E May 013

16 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) Rod Type Operators For rotary head switches: E50 Plug-In, E50 6P+, and Note: Only operators with Nylatron rods or rollers should be used with explosion-proof limit switches. Nylon/Metal Metal/Steel Nylon/Steel Nylon overed Wire Nylatron Nylatron Zinc-Plated Steel Operators Rod Type Rod Type Minimum Required Return Torque 1 pproximate Dimensions in Inches (mm) Rod Length (Maximum) Rod Diameter 1 aution: When selecting lever, the minimum required return torque of lever should not exceed minimum return force available in operating head as given in operating head specifications. Length from the operating shaft axis to tip. 3 pplies when lever is extended to the maximum dimension. atalog Number djustable Rod Nylon 0.40 in-oz (140.0) 0.19 (4.8) E50KL399 Metal 0.9 in-oz (3.) E50KL0 Metal.0 in-oz (.0) Rod size (square): E50KL (3.) x 0.1 (3.) Stainless steel 7.00 in-oz (9.0) 0.19 (4.8) E50KL0 endable steel 5.00 in-oz (305.0) 0.1 (3.) E50KL6 lamps for djustable Rods (Rod not included) lamp for 0.19 (4.8) diameter rods E50KL (3.) diameter rods E50KL (6.4) diameter rods E50KL41 Dimensions, see Page V8-T-87. Operators Rod Type, continued Minimum pproximate Dimensions in Inches (mm) Required Rod Type Return Torque 1 Rod Length Rod Diameter D Operators atalog Number Spring Rod Nylon 3.50 in-oz E50KL556 Stainless steel.80 in-oz E50KL41 djustable Wire Nylon covered wire 1.50 in-oz 3 E50KL533 djustable Wide Roller Lever Nylatron 4.50 in-oz 3 E50KL37 Nylatron Loop Nylatron 0.40 in-oz 6.00 (15.0) (4.0) E50KL14 Eye olt Zinc-plated steel 0.53 in-oz (38.1) (4.8) Loop ID: (9.5) Dimensions, see Page V8-T (13.1) 0.4 (8.6) E50KL33.8 Volume 8 Sensing Solutions E May V8-T-83

17 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) Operators Wobble Type Operators For E50DW1 and E50DWZ Operator Heads on E50 Plug-In and E50 6P+ Switches. Note: Only operators with Nylatron rods or rollers should be used with explosion-proof limit switches. E50KW E50KW3 E50KW4 Dimensions Roller Type Operators 0.44 (11) F E 0.67 (17) Operators Wobble Type Wobble Type Nylon Rod Stainless Steel Rod oil Spring Dimensions, see Page V8-T-88. D E50KW E50KW3 E50KW4 Standard Roller pproximate Dimensions in Inches (mm) Lever Length 1 Roller Diameter Note 1 Length from the operating shaft axis to the roller axis (or to the tip for non-roller operators). Roller Width D E F E50KL (.) 0.75 (19.0) 0.3 (8.1) 0.31 (7.9) 0.0 (5.1) 0.4 (6.1) E50KL (34.9) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) E50KL (38.1) 0.69 (17.5) 0.5 (6.4) 0.34 (8.6) 0.05 (1.3) 0.11 (.8) E50KL (38.1) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) E50KL (38.1) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) E50KL (38.1) 0.75 (19.0) 1.00 (5.4) 0.34 (8.6) 0.83 (1.1) 0.83 (1.1) E50KL (38.1) 0.34 (8.6) E50KL55.00 (50.8) 0.69 (17.5) 0.5 (6.4) 0.34 (8.6) 0.05 (1.3) 0.11 (.8) E50KL (50.8) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) E50KL (50.8) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) E50KL57.00 (50.8) 0.75 (19.0) 1.00 (5.4) 0.34 (8.6) 0.83 (1.1) 0.83 (1.1) E50KL (63.5) 0.69 (17.5) 0.5 (6.4) 0.34 (8.6) 0.05 (1.3) 0.11 (.8) E50KL (63.5) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) E50KL (63.5) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) E50KL (63.5) 0.75 (19.0) 1.00 (5.4) 0.34 (8.6) 0.83 (1.1) 0.83 (1.1) E50KL (63.5) 1.50 (38.1) 0.8 (7.1) 0.34 (8.6) 0.11 (.8) 0.17 (4.3) E50KL (76.) 0.69 (17.5) 0.5 (6.4) 0.34 (8.6) 0.05 (1.3) 0.11 (.8) E50KL (76.) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) E50KL (76.) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) E50KL (76.) 0.75 (19.0) 1.00 (5.4) 0.34 (8.6) 0.83 (1.1) 0.83 (1.1) E50KL (76.) 1.50 (38.1) 0.8 (7.1) 0.34 (8.6) 0.11 (.8) 0.17 (4.3) V8-T-84 Volume 8 Sensing Solutions E May 013

18 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) (11) Max 60º E F Dia 0.67 (17) D D 38 [1.50] 4 6 [0.94] [1.0] 0 [0.80] 8.4 [0.33] [0.64] [0.30] Dia. Max 60º Inboard Roller E 0R F [0.80] D 16 Precision [0.63] djustment 1.7 Screw [0.50] Roller on Reverse Side pproximate Dimensions in Inches (mm) Lever Length 1 Offset Roller pproximate Dimensions in mm [in] antam Lever pproximate Dimensions in mm [in] Precision djustment pproximate Dimensions in mm [in] Roller Diameter 1 Length from the operating shaft axis to the roller axis (or to the tip for non-roller operators). Maximum length dimension between operating shaft axis to the roller axis for comparison. Precision adjustable to lesser dimensions. Operators Roller Width D E F.8 E50KL (38.1) 0.69 (17.5) 0.5 (6.4) 0.34 (8.6) 0.18 (4.6) 0.4 (6.1) E50KL (38.1) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.7 (6.9) 0.31 (7.9) E50KL (38.1) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.7 (6.9) 0.31 (7.9) E50KL (38.1) 1.50 (38.1) 0.8 (7.1) 0.34 (8.6) 0.3 (5.8) 0.31 (7.9) Lever Length 1 Roller Diameter Roller Width Inboard E50KL [1.50] 19.0 [0.75] 8.1 [0.3] 0.8 [0.03] E50KL [1.50] 19.0 [0.75] 8.1 [0.3] 0.8 [0.03] E50KL [1.50] 17.5 [0.69] 6.4 [0.5] 1.0 [0.04] Outboard E50KL [1.50] 19.0 [0.75] 8.1 [0.3] 0.8 [0.03] E50KL [1.50] 19.0 [0.75] 8.1 [0.3] 0.8 [0.03] E50KL [1.50] 17.5 [0.69] 6.4 [0.5] 1.0 [0.04] E50KL [1.50] 19.0 [0.75] 5.4 [1.00] 16 [0.6] [0.85] 4.1 [0.16] 18 [0.69] 1 [0.48] 1.7 [0.50] 4.6 [0.18] Lever Length 1 Roller Diameter D Roller Width D E F E50KL [0.69] 19.0 [0.75] 8.1 [0.3] 1. [0.48] 6.1 [0.4] 7.1 [0.8] E50KL465 Roller length: 38.1 [1.50] 19.0 [0.75] 8.1 [0.3] 1. [0.48] 6.1 [0.4] 7.1 [0.8] E50KL [0.69] 6.4 [0.5] 1. [0.48] 4.1 [0.16] 5.6 [0.] Volume 8 Sensing Solutions E May V8-T-85

19 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) Operators 108 [4.4] 7 [1.08] Dia. 16 [0.6] Dia. 16 [0.6] Dia. 11 [0.4] 79 [3.1] 54 [.1] 38 [1.50] 54 [.1] 38 [1.50)] 1.7 [0.50] 1 [0.48] 1 [0.48] 7 [1.06] E D 7 [1.06] E D E D 5.4R [1.0] F G 95R [3.75] 10 [0.38] 1.0 [0.04] 10 [0.38] djustable Roller pproximate Dimensions in mm [in] Lever Length 1 Fork Lever oth Rollers on One Side pproximate Dimensions in mm [in] Fork Lever One Roller Outside, One Inside pproximate Dimensions in mm [in] 1 Length from the operating shaft axis to the roller axis (or to the tip for non-roller operators). y reassembling lever, minimum length can be reduced another 1.7 mm [0.5 in]. 3 High-grade stainless steel. Roller Diameter Roller Width D E E50KL [1.0] to 17.5 [0.69] 6.4 [0.5] 5.8 [0.3] 7.6 [0.30] E50KL [3.75] 19.0 [0.75] 8.1 [0.3] 7.4 [0.9] 8.4 [0.33] E50KL01SPL [0.75] 8.1 [0.3] 7.4 [0.9] 8.4 [0.33] E50KL [0.75] 8.1 [0.3] 7.4 [0.9] 8.4 [0.33] E50KL [0.75] 1.7 [0.50] 11.6 [0.46] 1. [0.48] E50KL [0.75] 5.4 [1.00].9 [0.90] 4.1 [0.95] E50KL [0.50] to 10.0 [4.00].8 [0.11] 4.8 [0.19] 4.1 [0.95] 8.6 [3.5] E50KL31 E50KL [0.50] to 95. [3.75] 41.3 [1.63] to 38.1 [1.50] 7.4 [0.9] 6.6 [0.6] 8.1 [0.3] 95. [3.75] Lever Length 1 Roller Diameter Roller Width D E E50KL [1.50] 17.5 [0.69] 6.4 [0.5].0 [0.08] 3.6 [0.14] E50KL [1.50] 19.0 [0.75] 8.1 [0.3] 4.1 [0.16] 5.1 [0.0] E50KL [1.50] 19.0 [0.75] 8.1 [0.3] 4.1 [0.16] 5.1 [0.0] E50KL [1.50] 19.0 [0.75] 5.4 [1.00] 1.3 [0.84].4 [0.88] Lever Length 1 Roller Diameter Roller Width D E F G E50KL [1.50] 17.5 [0.69] 6.4 [0.5].0 [0.08] 3.6 [0.14] 16.3 [0.64] 17.8 [0.70] E50KL [1.50] 19.0 [0.75] 8.1 [0.3] 4.1 [0.16] 5.1 [0.0] 18.5 [0.73] 19.6 [0.77] E50KL [1.50] 19.0 [0.75] 8.1 [0.3] 4.1 [0.16] 5.1 [0.0] 18.5 [0.73] 19.6 [0.77] V8-T-86 Volume 8 Sensing Solutions E May 013

20 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) pproximate Dimensions in Inches or mm [in] Rod Type Operators Max. Ext [.5] Dia. 1.7 [.50] 8.45 [1.1] 16.6 [.64] 9.65 [.38] djustable Rod Operators Spring Rod E50KL556 Spring Rod E50KL41 djustable Wire djustable Wide Roller Lever Nylatron Loop E50KL14 Eye olt [4.19] Max. 4. [.164] 1.7 [.50] 63.5 [.50] 8.4 [1.1] 16.3 [.64] 6.4 [.5] 1 pplies when lever is extended to the maximum dimension. Length from the operating shaft axis to tip. Rod Length 1 Rod Diameter E50KL [5.50] 4.8 [0.19] E50KL0 3. [0.1] E50KL581.0 [8.75] Rod size (square): 3. [0.1] x 3. [0.1] E50KL0 9.0 [9.00] 4.8 [0.19] E50KL [1.00] 3. [0.1] [9.76] [1.1] 6.35 [.5] 6.35 Dia. [.5] Nylon 1.7 [.50] 8.45 [1.1] 19.1 Dia. [.75] 48.3 [1.90] 8.1 [.3].9R [.90] 9.7 [.38] 31.8 [1.15] Max Dia [.64] 9.65 [.38] 15.4 [6.00] 1.7 [.50] 5.1 [.0].9 [.90] 4.0 [.158] Dia. Max [5.50] 9.7 [.38] [11.6] 6.35 [.5] 8.6 [9.0] 0.44 [11] atalog Number.9 [0.9] Dia. Steel Spring Rod 1.7 [.50] 8.45 [1.1] 16.6 [.64] 9.65 [.38] 0.67 [17] Rod Length D Rod Diameter 1.7 [.50] [1.1] Max. Ext [1.1] E50KL [1.50] 4.8 [0.1875] Loop ID: 9.5 [0.375] 6.35 [.5] 6.6 [.6] 3.05 [.1] Dia. Nylon 1.5 [.06] Dia. Steelcore 16.6 [.64] 1.7 [.50] 8.45 [1.1] Rod Width 9.65 [.38].8 D 13.1 [0.5] 8.6 [0.34] Volume 8 Sensing Solutions E May V8-T-87

21 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) Operators Wobble Type Operators Nylon Rod Stainless Steel Rod oil Spring 6.35 [.50] Dia [.81] [4.90] 1.60 [.063] Dia [13.64] 8.74 Dia. [.344] [5.76] V8-T-88 Volume 8 Sensing Solutions E May 013

22 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) Non Plug-In Switches Non Plug-In Switches Product Description Type L non plug-in limit switches by Eaton s electrical sector are sold as complete assembled devices only with a wide array of operating head configurations. ll switches are single-pole 1NO-1N. For the most current information on this product, visit our Web site: Features Side and top rotary, side and top push or wobble operation W, W or W and W operating modes are field convertible Double break-make snap action contacts, same polarity each pole aptive saddle clamp terminals accept up to #1 wire Head can be mounted in any of four discrete positions, intervals of 90 ontents Non Plug-In Switches Description Non Plug-In Switches Product Selection Technical Data and Specifications Dimensions Standards and ertifications UL Listed S ertified.9 Page V8-T-90 V8-T-91 V8-T-91 DNGER THIS SENSOR IS NOT SFETY DEVIE ND IS NOT INTENDED TO E USED S SFETY DEVIE. This sensor is designed only to detect and read certain data in an electronic manner and perform no use apart from that, specifically no safetyrelated use. This sensor product does not include self-checking redundant circuitry, and the failure of this sensor product could cause either an energized or de-energized output condition, which could result in death, serious bodily injury, or property damage. For ustomer Service in the U.S. call ETN RE (386-73), in anada call For pplication ssistance in the U.S. and anada call Volume 8 Sensing Solutions E May V8-T-89

23 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) Non Plug-In Switches Product Selection Side Rotary Operated Top Rotary Operated Side Push Operated Top Push Operated Wobble Operated omplete ssembled Switches Single-Pole 1NO-1N Operating Data Nominal Operating haracteristics 1 For operating levers, see Page V8-T-80. For wobble operators, see Page V8-T-80. Travel to Operate ontacts Travel to Reset ontacts Total Travel Force to Operate ontacts Minimum Return Force Side Rotary Operated 1 Standard in-lbs 4.5 in-oz 10316H187 Top Rotary Operated 1 lockwise in-lbs 3 in-oz 10316H700 ounterclockwise in-lbs 3 in-oz 10316H701 Side Push Operated djustable pushbutton 0.07 in (1.8 mm) 0.03 in (0.8 mm) 0.9 in (7.4 mm) 4 lbs 8 oz 10316H61 Vertical roller 0.07 in (1.8 mm) 0.03 in (0.8 mm) 0.9 in (7.4 mm) 4 lbs 8 oz 10316H in (11. mm) dia. Horizontal roller 0.07 in (1.8 mm) 0.03 in (0.8 mm) 0.9 in (7.4 mm) 4 lbs 8 oz 10316H in (11. mm) dia. Top Push Operated Pushbutton 0.04 in (1.0 mm) 0.0 in (0.5 mm) 0.8 in (7.1 mm) 4 lbs 8 oz 10316H81 Roller 0.44 in (11. mm) dia in (1.0 mm) 0.0 in (0.5 mm) 0.8 in (7.1 mm) 4 lbs 8 oz 10316H83 Roller 0.75 in (19.1 mm) dia in (1.0 mm) 0.0 in (0.5 mm) 0.8 in (7.1 mm) 4 lbs 8 oz 10316H577 Wobble Operated Spring in-lb.4 in-oz 10316H99 Nylon rod in-lbs.4 in-oz 10316H96 Wire in-lbs.4 in-oz 10316H484 at whisker in-lb 1.7 in-oz 10316H341 V8-T-90 Volume 8 Sensing Solutions E May 013

24 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) Technical Data and Specifications Non Plug-In Switches Description Specification ontact rating NEM 600, R300 double break-make snap action contacts Electrical life 500,000 operations minimum Mechanical life 5,000,000 operations minimum at full load onduit entrance 0.5 in (1.7 mm) NPT Material of construction Zinc die cast Enclosure rating NEM 1, 4, 13 mbient operating temperature 0 to 00 F ( 9 to 93 ) 1 pproximate shipping weight lbs Electrical Data Maximum ontact Ratings per Pole urrent, mperes Volts, mperes ont. Thermal Volts Make reak Ratings Make reak D Volts NEM 600, R300 Rating Dimensions pproximate Dimensions in Inches or Inches (mm) Side Rotary Operated Head with Switch () 0.03 Dia. Holes for Front Mtg. () 10-3 Tapped Holes Deep for Rear Mtg Pipe Tap Non Plug-In Switches.9 Side Pushbutton, djustable Top Pushbutton Side Push, Vertical Roller Sq Sq Max. djustment Side Push Maintained ontact Top Push Roller Wobble Operators 0.38 Dia Sq Dimension With 0.44 (11.) dia. roller.03 (51.6) With 0.75 (19.1) dia. roller.34 (59.4) D urrent, mpere Wobble Spring 5.44 (138.) 0.31 (7.9) 0.81 (0.6) Wire Wobble Stick 1.5 (317.5) 0.08 (.0) 0.81 (0.6) Nylon Wobble Stick 4.5 (114.3) 0.5 (6.4) 0.81 (0.6) Dimension With 0.44 (11.) dia. roller 1.78 (45.) With 0.75 (19.1) dia. roller.09 (53.1) Ranges below 3 F (0 ) are based on absence of freezing moisture or water. ontacts must be same polarity when both circuits are used. 3 Dimension from centerline of head to mounting surface is 0.78 in (0 mm). 4 enter to mounting surface. 3 Volume 8 Sensing Solutions E May V8-T-91

25 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) Hazardous Location Hazardous Location Hazardous Location Product Description Features Type LX, X and X limit switches by Eaton s electrical sector are designed for extreme environmental service in NEM 7 9 locations where the danger of an internal or external explosion of flammable gases, vapors, metal alloy or grain dust exists. Type provides excellent corrosion resistant properties in NEM 4X applications. Markets served include mining, grain storage, forest products, petrochemical, pharmaceutical and waste and sewage management. For the most current information on this product, visit our Web site: Sealed and unsealed versions available One-way gasket on sealed version keeps liquids out, yet allows a harmless release of gases in the event of an internal explosion Silicon bronze housing provides excellent corrosion resistant properties in extreme NEM 4X applications Temperature buildup on limit switch surface is dissipated by housing design and materials used Utilizes the operating heads and internal switch mechanisms of the L non plug-in line ontents Description Hazardous Location Product Selection Technical Data and Specifications Dimensions Standards and ertifications cul NEM Ratings omparison Switch Type LX X X 1 NEM 1, 4, 13 NEM 4X NEM 7 Division I, lass I, D NEM 9 Division I, lass II, EFG Note 1 Not rated for explosive locations. Page V8-T-93 V8-T-94 V8-T-91 DNGER THIS SENSOR IS NOT SFETY DEVIE ND IS NOT INTENDED TO E USED S SFETY DEVIE. This sensor is designed only to detect and read certain data in an electronic manner and perform no use apart from that, specifically no safetyrelated use. This sensor product does not include self-checking redundant circuitry, and the failure of this sensor product could cause either an energized or de-energized output condition, which could result in death, serious bodily injury, or property damage. For ustomer Service in the U.S. call ETN RE (386-73), in anada call For pplication ssistance in the U.S. and anada call V8-T-9 Volume 8 Sensing Solutions E May 013

26 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) Product Selection Head Type Side Rotary Operated Side Push Operated omplete ssembled Switches with Spring Return Heads 1 Operating Data Nominal Travel to Operate ontacts Travel to Reset ontacts Total Travel Force to Operate ontacts Hazardous Location Minimum Return Force 1 ontact Eaton s Sensor pplications Engineering at for replacement contact blocks. For operating levers, see Page V8-T-80. Only levers with Nylatron rods or rollers should be used with explosion-proof limit switches. 3 Field convertible to clockwise only or counterclockwise only operation. 4 1NO-1N contacts must be same polarity when both circuits are used 1NO and 1N contacts have isolated poles and may be used on opposite polarity. 5 Neutral position switches operate one circuit in each direction..10 ody Type ontacts Standard, 10 Pre-Travel in-lbs 4.5 in-oz Type LX 1NO-1N H100 NO 10316H1039 1NO and 1N H1049 Narrow Differential 5 Pre-Travel 3 N 10316H1059 Type X 1NO-1N H00 1NO and 1N H176 N 10316H178 Type 1NO-1N H149 N 10316H140 Type X 1NO-1N H168 N 10316H in-lbs 4.5 in-oz Type LX 1NO-1N H1146 Type X 1NO-1N H197 Neutral Position, 18 Pre-Travel in-lbs.5 in-oz Type LX NO 10316H1071 N 10316H107 Type X NO 10316H179 Type X N 10316H160 Pushbutton 0.07 in (1.8 mm) 0.03 in (0.76 mm) 0.9 in (7.4 mm) 4 lbs 8 oz Type LX 1NO and 1N H113 djustable Pushbutton 0.07 in (1.8 mm) 0.03 in (0.76 mm) 0.9 in (7.4 mm) 4 lbs 8 oz Type LX 1NO-1N H119 Vertical Roller, 0.44 in (11. mm) Diameter 0.07 in (1.8 mm) 0.03 in (0.76 mm) 0.9 in (7.4 mm) 4 lbs 8 oz Type LX 1NO-1N H1007 Vertical Roller, 0.75 in (19.1 mm) Diameter 0.07 in (1.8 mm) 0.03 in (0.76 mm) 0.9 in (7.4 mm) 4 lbs 8 oz Type LX 1NO-1N H1194 Volume 8 Sensing Solutions E May V8-T-93

27 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) Head Type Top Push Operated Wobble Operated Technical Data and Specifications Hazardous Location omplete ssembled Switches with Spring Return Heads, continued 1 Operating Data Nominal Travel to Operate ontacts Travel to Reset ontacts Total Travel Force to Operate ontacts Hazardous Location Description Specification Material of construction LX, X ast aluminum die cast, X Silicon bronze onduit entrance LX 1/ in pipe tap, X, X 3/4 in pipe tap Mounting Surface mount Enclosure rating LX, X, X NEM 7 Div. 1, lass I D; NEM 9 Div. 1, lass II, EFG 4, X NEM 1, 4, 4X, 13 4 X NEM 1, 4, 13 4 mbient operating temperature 0 to 00 F ( 9 to 93 ) 5 pproximate shipping weight LX lbs X.5 lbs, X 6 lbs Minimum Return Force 1 ontact Eaton s Sensor pplications Engineering at for replacement contact blocks. 1NO-1N contacts must be same polarity when both circuits are used 1NO and 1N contacts have isolated poles and may be used on opposite polarity. 3 Travel with force applied at one-in (5.4 mm) radius. pplied at end of operator, travel is approximately conduit seal-off kit is required for these switches 5 Ranges below 3 F (0 ) are based on absence of freezing moisture or water. ody Type ontacts Pushbutton 0.04 in (1 mm) 0.0 in (0.5 mm) 0.8 in (7.1 mm) 4 lbs 8 oz Type LX 1NO-1N 10316H1004 Type X 1NO and 1N 10316H188 djustable Pushbutton 0.04 in (1 mm) 0.0 in (0.5 mm) 0.8 in (7.1 mm) 4 lbs 8 oz Type LX 1NO-1N 10316H1191 1NO and 1N 10316H11 Roller, 0.44 in (11. mm) Diameter 0.04 in (1 mm) 0.0 in (0.5 mm) 0.8 in (7.1 mm) 4 lbs 8 oz Type LX 1NO-1N 10316H1006 Type X 1NO-1N 10316H170 Roller, 0.75 in (19.1 mm) Diameter 0.04 in (1 mm) 0.0 in (0.5 mm) 0.8 in (7.1 mm) 4 lbs 8 oz Type LX 1NO-1N 10316H1193 Spring in-lb.4 in-oz Type LX 1NO-1N 10316H137 Nylon Rod in-lbs 5.6 in-oz Type LX 1NO-1N 10316H1009 V8-T-94 Volume 8 Sensing Solutions E May 013

28 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) Electrical Data Maximum ontact Ratings, per Pole urrent, mperes Volt mperes Volts Make reak ont. 1 Make reak Hazardous Location Dimensions pproximate Dimensions in Inches or Inches (mm) Type LX Switch with Side Rotary Head Side Pushbutton Head Top Pushbutton Head Type X, and X Switches with Side Rotary Head djustable Side Pushbutton Head djustable Top Pushbutton Head Top Push Roller Head D Volts 1NO-1N Switches NEM 600, R300 rating ll Other Switches, Dia. Holes Dia. 4 Mtg. Holes 3/4-14 Taper Pipe Tap /4-0 Pipe Tap Deep oth Sides 0.50 Pipe Tap /4-0 Pipe Tap 0.8 Deep oth Sides 0.7 Dia Holes 5/16-18 Pipe Tap 0.56 Deep oth Sides Sq Max. djustment Type X Type X Type Sq Sq Max. djustment Dimension With 0.44 (11.) dia. roller.03 (51.6) With 0.75 (19.1) dia. roller.34 (59.4) Sq Wobble Operators D urrent, mpere Wobble Spring 5.44 (138.) 0.31 (7.9) 0.94 (3.9) Nylon Red 4.5 (114.3) 0.5 (6.4) 0.94 (3.9) 5 3 Side Push, Vertical Roller Head Dimension With 0.44 (11.) dia. roller 1.78 (45.) With 0.75 (19.1) dia. roller.09 (53.1) NO-1N contacts must be same polarity when both circuits are used 1NO and 1N contacts have isolated poles and may be used on opposite polarities. Dimension from centerline of head to mounting surface is 0.78 in (0 mm). 3 enter to mounting surface. 5 Volume 8 Sensing Solutions E May V8-T-95

29 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) Special Purpose Special Purpose Special Purpose Product Description Features Special Purpose (Type F), UL Listed Rotating Shaft (Type J), S ertified Pneumatic Time Delay (Type (PS and J only) LP) and Precision and abinet Door Interlock (Type PS) Limit Switches from Eaton s electrical sector serve a variety of special purpose industrial applications for MRO and User Replacement requirements. For the most current information on this product, visit our Web site: ontents Description Special Purpose Product Selection Roller Lever Switches Rotating Shaft Switches Pneumatic Time Delay Switches Precision Switches Technical Data and Specifications Dimensions Standards and ertifications Type F UL Listed Type J UL Listed S ertified Type LP UL Listed Type PS UL Recognized S ertified Page V8-T-97 V8-T-97 V8-T-98 V8-T-98 V8-T-99 V8-T-101 DNGER THIS SENSOR IS NOT SFETY DEVIE ND IS NOT INTENDED TO E USED S SFETY DEVIE. This sensor is designed only to detect and read certain data in an electronic manner and perform no use apart from that, specifically no safetyrelated use. This sensor product does not include self-checking redundant circuitry, and the failure of this sensor product could cause either an energized or de-energized output condition, which could result in death, serious bodily injury, or property damage. For ustomer Service in the U.S. call ETN RE (386-73), in anada call For pplication ssistance in the U.S. and anada call V8-T-96 Volume 8 Sensing Solutions E May 013

30 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) Product Selection Roller Lever Switches Roller Lever Rotating Shaft Switches Type J Type F Switches 1 Rotating Shaft allow the shaft to be rotated a preset number of revolutions (adjustable from 1/ to 100 with an accuracy of 1/0 of a turn) before the contacts will switch. second set of Rotating Shaft Operator Roller lever (W and W operation, spring return) Type J Switches Shaft to am Ratio contacts will trip when reaching a preset limit in the opposite direction. These switches are typically used in crane and hoist applications to provide end of travel stops for the hook assembly. Max. Turns to Trip ontacts 103:1 100 input shaft turns ircuit Travel to Operate ontacts 1 Replacement operator head is available with part number Replacement roller lever is available with part number Replacement key pin and washer for roller is available with part number For replacement NO contacts, order ; N contacts, order H54 has factory set circuits, but is easily convertible to any of three circuits (NO-N, 4NO or 4N). Full instructions enclosed with every switch. Special Purpose.11 Travel to Reset ontacts Total Travel Over-Travel 1NO-1N H18 NO-N H30 Min. Turns to Trip ontacts 1/ input shaft turns Over-Travel efore Resetting ontacts 103 input shaft turns max. Reversal fter Tripping to Enclosure Reset ontacts ircuit Rating 1/8 input shaft turns min. N NEM H50 NO-N 3 NEM H54 3 Volume 8 Sensing Solutions E May V8-T-97

31 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) Pneumatic Time Delay Switches Pneumatic Time Delay Precision Switches abinet Door Interlock Special Purpose Type LP Switches Operator Total Travel Pre-Travel ircuit Type PS Switches 1 Requires an operating lever, see Page V8-T-80. Field convertible. 3 The plunger exposes a red band when pulled out to indicate that interlock is defeated. Timed ontacts Direction of Rotation Side rotary NO-1N ON delay W 10316H1580 (Spring return to center) 1 Operator ircuits SPDT 1NO-1N W and W 10316H1600 OFF delay W 10316H1610 ircuits DPDT NO-N W and W 10316H1630 Operator Only Precision Switch Devices Precision switch only 10316H H000 Pushbutton with oiltight plunger 10316H006 Roller with oiltight plunger perpendicular to mounting holes 10316H01 Roller with oiltight plunger in line with mounting holes 10316H110 6 in lever with top and right-hand mounting bracket 10316H H143 6 in lever with top and left-hand mounting bracket 10316H144 Roller lever with top and right-hand mounting bracket 10316H H145 Roller lever with top and left-hand mounting bracket 10316H H146 One way roller lever with top and right-hand mounting bracket 10316H147 One way roller lever with top and left-hand mounting bracket 10316H148 abinet Door Interlocks Precision switch only 10316H H89 abinet door interlock operator with one precision switch and 10316H H H150 with red (defeated 3 ) indicator abinet door interlock operator with two each of listed precision switches and with red (defeated 3 ) indicator 10316H109 V8-T-98 Volume 8 Sensing Solutions E May 013