2.8. Limit Switches. Contents Description. Operators. Operators

Transcription

1 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic lectrical Mechanical (800) Product escription The presented here are used with aton s 50 Plug-In and 6P+ limit switches, as well as our rotary type limit switches. wide variety of styles and sizes are available to provide optimum performance for nearly any application. For the most current information on this product, visit our Web site: Features Wide variety of operator types for rotary and wobble style limit switches Rollers and rods available in metal and nonmetal contact surfaces ontents escription Product Selection Roller Type Rod Type Wobble Type imensions rawings Online NGR THIS SNSOR IS NOT SFTY VI N IS NOT INTN TO US S SFTY VI. This sensor is designed only to detect and read certain data in an electronic manner and perform no use apart from that, specifically no safetyrelated use. This sensor product does not include self-checking redundant circuitry, and the failure of this sensor product could cause either an energized or de-energized output condition, which could result in death, serious bodily injury, or property damage. Page V8-T-81 V8-T-83 V8-T-84 V8-T-84 For ustomer Service in the U.S. call TN R (386-73), in anada call For pplication ssistance in the U.S. and anada call V8-T-80 Volume 8 Sensing Solutions May 013

2 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic lectrical Mechanical (800) Product Selection Roller Type For rotary head switches: 50 Plug-In, 50 6P+, and Note: Only operators with Nylatron rods or rollers should be used with explosion-proof limit switches. 50KL00 50KL355 50KL377 50KL554 50KL580 50KL4 50KL7 Roller Type Roller Type Minimum Return Torque 1 pproximate imensions in Inches (mm) Lever Length Roller iameter 1 aution: When selecting lever, the minimum required return torque of lever should not exceed minimum return force available in operating head as given in operating head specifications. Length from the operating shaft axis to the roller axis (or to the tip for non-roller operators). Roller Width F.8 atalog Standard Roller (Stainless Steel) Metal 0.6 in-oz 0.88 (.) 0.75 (19.0) 0.3 (8.1) 0.31 (7.9) 0.0 (5.1) 0.4 (6.1) 50KL39 Metal 0.95 in-oz 1.38 (34.9) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) 50KL40 all bearing 0.77 in-oz 1.50 (38.1) 0.69 (17.5) 0.5 (6.4) 0.34 (8.6) 0.05 (1.3) 0.11 (.8) 50KL531 Nylatron 0.53 in-oz 1.50 (38.1) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) 50KL00 Metal 1.10 in-oz 1.50 (38.1) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) 50KL355 Nylatron 0.96 in-oz 1.50 (38.1) 0.75 (19.0) 1.00 (5.4) 0.34 (8.6) 0.83 (1.1) 0.83 (1.1) 50KL377 Without roller 0.3 in-oz 1.50 (38.1) 0.34 (8.6) 50KL3 all bearing 1.10 in-oz.00 (50.8) 0.69 (17.5) 0.5 (6.4) 0.34 (8.6) 0.05 (1.3) 0.11 (.8) 50KL55 Nylatron 0.71 in-oz.00 (50.8) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) 50KL546 Metal 1.50 in-oz.00 (50.8) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) 50KL549 Nylatron 1.45 in-oz.00 (50.8) 0.75 (19.0) 1.00 (5.4) 0.34 (8.6) 0.83 (1.1) 0.83 (1.1) 50KL57 all bearing 1.50 in-oz.50 (63.5) 0.69 (17.5) 0.5 (6.4) 0.34 (8.6) 0.05 (1.3) 0.11 (.8) 50KL553 Nylatron 1.00 in-oz.50 (63.5) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) 50KL547 Metal.00 in-oz.50 (63.5) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) 50KL550 Nylatron 1.80 in-oz.50 (63.5) 0.75 (19.0) 1.00 (5.4) 0.34 (8.6) 0.83 (1.1) 0.83 (1.1) 50KL573 Nylatron 1.40 in-oz.50 (63.5) 1.50 (38.1) 0.8 (7.1) 0.34 (8.6) 0.11 (.8) 0.17 (4.3) 50KL575 all bearing 1.80 in-oz 3.00 (76.) 0.69 (17.5) 0.5 (6.4) 0.34 (8.6) 0.05 (1.3) 0.11 (.8) 50KL554 Nylatron 1.30 in-oz 3.00 (76.) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) 50KL548 Metal.50 in-oz 3.00 (76.) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) 50KL551 Nylatron.30 in-oz 3.00 (76.) 0.75 (19.0) 1.00 (5.4) 0.34 (8.6) 0.83 (1.1) 0.83 (1.1) 50KL574 Nylatron 1.80 in-oz 3.00 (76.) 1.50 (38.1) 0.8 (7.1) 0.34 (8.6) 0.11 (.8) 0.17 (4.3) 50KL576 imensions, see Page V8-T-84. Roller On Reverse Side (Stainless Steel) all bearing 0.77 in-oz 1.50 (38.1) 0.69 (17.5) 0.5 (6.4) 0.34 (8.6) 0.18 (4.6) 0.4 (6.1) 50KL580 Nylatron 0.53 in-oz 1.50 (38.1) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.7 (6.9) 0.31 (7.9) 50KL310 Metal 1.10 in-oz 1.50 (38.1) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.7 (6.9) 0.31 (7.9) 50KL579 Nylatron 0.96 in-oz 1.50 (38.1) 1.50 (38.1) 0.8 (7.1) 0.34 (8.6) 0.3 (5.8) 0.31 (7.9) 50KL536 Offset Inboard Roller (Stainless Steel) Nylatron 0.65 in-oz 1.50 (38.1) 0.75 (19.0) 0.3 (8.1) 0.03 (0.8) 50KL4 Metal 1.0 in-oz 1.50 (38.1) 0.75 (19.0) 0.3 (8.1) 0.03 (0.8) 50KL5 all bearing 0.90 in-oz 1.50 (38.1) 0.69 (17.5) 0.5 (6.4) 0.04 (1.0) 50KL6 Offset Outboard Roller (Stainless Steel) Nylatron 0.65 in-oz 1.50 (38.1) 0.75 (19.0) 0.3 (8.1) 0.03 (0.8) 50KL7 Metal 1.0 in-oz 1.50 (38.1) 0.75 (19.0) 0.3 (8.1) 0.03 (0.8) 50KL8 all bearing 0.90 in-oz 1.50 (38.1) 0.69 (17.5) 0.5 (6.4) 0.04 (1.0) 50KL9 Nylatron 1.10 in-oz 1.50 (38.1) 0.75 (19.0) 1.00 (5.4) 50KL30 imensions, see Page V8-T-85. Volume 8 Sensing Solutions May V8-T-81

3 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic lectrical Mechanical (800) Note: Only operators with Nylatron rods or rollers should be used with explosion-proof limit switches. 50KL53 50KL340 50KL01 50KL537 50KL545 50KL54 Roller Type, continued Minimum pproximate imensions in Inches (mm) Roller Type Return Torque 1 Lever Length Roller iameter Roller Width F 1 aution: When selecting lever, the minimum required return torque of lever should not exceed minimum return force available in operating head as given in operating head specifications. Length from the operating shaft axis to the roller axis (or to the tip for non-roller operators). 3 Maximum length dimension between operating shaft axis to roller axis for comparison. Precision adjustable to lesser dimensions. 4 pplies when lever is extended to the maximum dimension. 5 y reassembling lever, minimum length can be reduced another 0.5 in (1.7 mm). 6 High-grade stainless steel. atalog antam Lever Metal 0.45 in-oz 0.69 (17.5) 0.85 (.0) 0.18 (4.6) 50KL53 Precision djustment Nylatron 0.65 in-oz 0.69 (17.5) 0.75 (19.0) 0.3 (8.1) 0.48 (1.) 0.4 (6.1) 0.8 (7.1) 50KL340 Metal 1.0 in-oz Roller length: 1.50 (38.1) (19.0) 0.3 (8.1) 0.48 (1.) 0.4 (6.1) 0.8 (7.1) 50KL465 all bearing 0.90 in-oz 0.69 (17.5) 0.5 (6.4) 0.48 (1.) 0.16 (4.1) 0. (5.6) 50KL535 imensions, see Page V8-T-85. djustable Roller (Stainless Steel) all bearing.50 in-oz (5.4) to 0.69 (17.5) 0.5 (6.4) 0.3 (5.8) 0.30 (7.6) 50KL539 Nylatron 1.90 in-oz (95.) (19.0) 0.3 (8.1) 0.9 (7.4) 0.33 (8.4) 50KL (19.0) 0.3 (8.1) 0.9 (7.4) 0.33 (8.4) 50KL01SPL 6 Metal 3.40 in-oz (19.0) 0.3 (8.1) 0.9 (7.4) 0.33 (8.4) 50KL538 Nylatron 1.90 in-oz (19.0) 0.50 (1.7) 0.46 (11.6) 0.48 (1.) 50KL599 Nylatron 3.10 in-oz (19.0) 1.00 (5.4) 0.90 (.9) 0.95 (4.1) 50KL537 Large Nylatron 4.50 in-oz (1.7) to 4.00 (10.0) 0.11 (.8) 0.11 (.8) 0.19 (4.8) 50KL (8.6) Without roller 1.0 in-oz (1.7) to 50KL (95.) Nylatron.50 in-oz (41.3) to 3.75 (95.) (38.1) 0.9 (7.4) 0.6 (6.6) 0.3 (8.1) 50KL443 imensions, see Page V8-T-86. Roller Type, continued Minimum pproximate imensions in Inches (mm) Return Roller Type Torque 1 Lever Length Roller iameter Roller Width F G atalog Fork Lever oth Rollers on One Side all bearing 1.50 (38.1) 0.69 (17.5) 0.5 (6.4) 0.08 (.0) 0.14 (3.6) 50KL545 Nylatron 0.75 (19.0) 0.3 (8.1) 0.16 (4.1) 0,0 (5.1) 50KL04 Metal 0.75 (19.0) 0.3 (8.1) 0.16 (4.1) 0,0 (5.1) 50KL544 Nylatron 0.75 (19.0) 1.00 (5.4) 0.84 (1.3) 0.88 (.4) 50KL543 Fork Lever One Roller Outside, One Inside all bearing 1.50 (38.1) 0.69 (17.5) 0.5 (6.4) 0.08 (.0) 0.14 (3.6) 0.64 (16.3) 0.70 (17.8) 50KL54 Nylatron 0.75 (19.0) 0.3 (8.1) 0.16 (4.1) 0.0 (5.1) 0.73 (18,5) 0.77 (19.6) 50KL03 Metal 0.75 (19.0) 0.3 (8.1) 0.16 (4.1) 0.0 (5.1) 0.73 (18,5) 0.77 (19.6) 50KL541 imensions, see Page V8-T-86. V8-T-8 Volume 8 Sensing Solutions May 013

4 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic lectrical Mechanical (800) Rod Type For rotary head switches: 50 Plug-In, 50 6P+, and Note: Only operators with Nylatron rods or rollers should be used with explosion-proof limit switches. Nylon/Metal Metal/Steel Nylon/Steel Nylon overed Wire Nylatron Nylatron Zinc-Plated Steel Rod Type Rod Type Minimum Return Torque 1 pproximate imensions in Inches (mm) Rod Length (Maximum) Rod iameter 1 aution: When selecting lever, the minimum required return torque of lever should not exceed minimum return force available in operating head as given in operating head specifications. Length from the operating shaft axis to tip. 3 pplies when lever is extended to the maximum dimension. atalog djustable Rod Nylon 0.40 in-oz (140.0) 0.19 (4.8) 50KL399 Metal 0.9 in-oz (3.) 50KL0 Metal.0 in-oz (.0) Rod size (square): 50KL (3.) x 0.1 (3.) Stainless steel 7.00 in-oz (9.0) 0.19 (4.8) 50KL0 endable steel 5.00 in-oz (305.0) 0.1 (3.) 50KL6 lamps for djustable Rods (Rod not included) lamp for 0.19 (4.8) diameter rods 50KL (3.) diameter rods 50KL (6.4) diameter rods 50KL41 imensions, see Page V8-T-87. Rod Type, continued Minimum pproximate imensions in Inches (mm) Rod Type Return Torque 1 Rod Length Rod iameter atalog Spring Rod Nylon 3.50 in-oz 50KL556 Stainless steel.80 in-oz 50KL41 djustable Wire Nylon covered wire 1.50 in-oz 3 50KL533 djustable Wide Roller Lever Nylatron 4.50 in-oz 3 50KL37 Nylatron Loop Nylatron 0.40 in-oz 6.00 (15.0) (4.0) 50KL14 ye olt Zinc-plated steel 0.53 in-oz (38.1) (4.8) Loop I: (9.5) imensions, see Page V8-T (13.1) 0.4 (8.6) 50KL33.8 Volume 8 Sensing Solutions May V8-T-83

5 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic lectrical Mechanical (800) Wobble Type For 50W1 and 50WZ Operator Heads on 50 Plug-In and 50 6P+ Switches. Note: Only operators with Nylatron rods or rollers should be used with explosion-proof limit switches. 50KW 50KW3 50KW4 imensions Roller Type 0.44 (11) F 0.67 (17) Wobble Type Wobble Type atalog Nylon Rod Stainless Steel Rod oil Spring imensions, see Page V8-T KW 50KW3 50KW4 Standard Roller pproximate imensions in Inches (mm) atalog Roller iameter Note 1 Length from the operating shaft axis to the roller axis (or to the tip for non-roller operators). Roller Width F 50KL (.) 0.75 (19.0) 0.3 (8.1) 0.31 (7.9) 0.0 (5.1) 0.4 (6.1) 50KL (34.9) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) 50KL (38.1) 0.69 (17.5) 0.5 (6.4) 0.34 (8.6) 0.05 (1.3) 0.11 (.8) 50KL (38.1) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) 50KL (38.1) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) 50KL (38.1) 0.75 (19.0) 1.00 (5.4) 0.34 (8.6) 0.83 (1.1) 0.83 (1.1) 50KL (38.1) 0.34 (8.6) 50KL55.00 (50.8) 0.69 (17.5) 0.5 (6.4) 0.34 (8.6) 0.05 (1.3) 0.11 (.8) 50KL (50.8) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) 50KL (50.8) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) 50KL57.00 (50.8) 0.75 (19.0) 1.00 (5.4) 0.34 (8.6) 0.83 (1.1) 0.83 (1.1) 50KL (63.5) 0.69 (17.5) 0.5 (6.4) 0.34 (8.6) 0.05 (1.3) 0.11 (.8) 50KL (63.5) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) 50KL (63.5) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) 50KL (63.5) 0.75 (19.0) 1.00 (5.4) 0.34 (8.6) 0.83 (1.1) 0.83 (1.1) 50KL (63.5) 1.50 (38.1) 0.8 (7.1) 0.34 (8.6) 0.11 (.8) 0.17 (4.3) 50KL (76.) 0.69 (17.5) 0.5 (6.4) 0.34 (8.6) 0.05 (1.3) 0.11 (.8) 50KL (76.) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) 50KL (76.) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.13 (3.3) 0.17 (4.3) 50KL (76.) 0.75 (19.0) 1.00 (5.4) 0.34 (8.6) 0.83 (1.1) 0.83 (1.1) 50KL (76.) 1.50 (38.1) 0.8 (7.1) 0.34 (8.6) 0.11 (.8) 0.17 (4.3) V8-T-84 Volume 8 Sensing Solutions May 013

6 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic lectrical Mechanical (800) (11) Max 60º F ia 0.67 (17) 38 [1.50] 4 6 [0.94] [1.0] 0 [0.80] 8.4 [0.33] [0.64] [0.30] ia. Max 60º Inboard Roller 0R F [0.80] 16 Precision [0.63] djustment 1.7 Screw [0.50] Roller on Reverse Side pproximate imensions in Inches (mm) atalog Offset Roller pproximate imensions in mm [in] antam Lever pproximate imensions in mm [in] Precision djustment pproximate imensions in mm [in] Roller iameter 1 Length from the operating shaft axis to the roller axis (or to the tip for non-roller operators). Maximum length dimension between operating shaft axis to the roller axis for comparison. Precision adjustable to lesser dimensions. Roller Width F.8 50KL (38.1) 0.69 (17.5) 0.5 (6.4) 0.34 (8.6) 0.18 (4.6) 0.4 (6.1) 50KL (38.1) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.7 (6.9) 0.31 (7.9) 50KL (38.1) 0.75 (19.0) 0.3 (8.1) 0.34 (8.6) 0.7 (6.9) 0.31 (7.9) 50KL (38.1) 1.50 (38.1) 0.8 (7.1) 0.34 (8.6) 0.3 (5.8) 0.31 (7.9) atalog Roller iameter Roller Width Inboard 50KL [1.50] 19.0 [0.75] 8.1 [0.3] 0.8 [0.03] 50KL [1.50] 19.0 [0.75] 8.1 [0.3] 0.8 [0.03] 50KL [1.50] 17.5 [0.69] 6.4 [0.5] 1.0 [0.04] Outboard 50KL [1.50] 19.0 [0.75] 8.1 [0.3] 0.8 [0.03] 50KL [1.50] 19.0 [0.75] 8.1 [0.3] 0.8 [0.03] 50KL [1.50] 17.5 [0.69] 6.4 [0.5] 1.0 [0.04] 50KL [1.50] 19.0 [0.75] 5.4 [1.00] 16 [0.6] [0.85] atalog 4.1 [0.16] 18 [0.69] 1 [0.48] 1.7 [0.50] 4.6 [0.18] Roller iameter Roller Width F 50KL [0.69] 19.0 [0.75] 8.1 [0.3] 1. [0.48] 6.1 [0.4] 7.1 [0.8] 50KL465 Roller length: 38.1 [1.50] 19.0 [0.75] 8.1 [0.3] 1. [0.48] 6.1 [0.4] 7.1 [0.8] 50KL [0.69] 6.4 [0.5] 1. [0.48] 4.1 [0.16] 5.6 [0.] Volume 8 Sensing Solutions May V8-T-85

7 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic lectrical Mechanical (800) [4.4] 7 [1.08] ia. 16 [0.6] ia. 16 [0.6] ia. 11 [0.4] 79 [3.1] 54 [.1] 38 [1.50] 54 [.1] 38 [1.50)] 1.7 [0.50] 1 [0.48] 1 [0.48] 7 [1.06] 7 [1.06] 5.4R [1.0] F G 95R [3.75] 10 [0.38] 1.0 [0.04] 10 [0.38] djustable Roller pproximate imensions in mm [in] atalog Fork Lever oth Rollers on One Side pproximate imensions in mm [in] Fork Lever One Roller Outside, One Inside pproximate imensions in mm [in] 1 Length from the operating shaft axis to the roller axis (or to the tip for non-roller operators). y reassembling lever, minimum length can be reduced another 1.7 mm [0.5 in]. 3 High-grade stainless steel. Roller iameter Roller Width 50KL [1.0] to 17.5 [0.69] 6.4 [0.5] 5.8 [0.3] 7.6 [0.30] 50KL [3.75] 19.0 [0.75] 8.1 [0.3] 7.4 [0.9] 8.4 [0.33] 50KL01SPL [0.75] 8.1 [0.3] 7.4 [0.9] 8.4 [0.33] 50KL [0.75] 8.1 [0.3] 7.4 [0.9] 8.4 [0.33] 50KL [0.75] 1.7 [0.50] 11.6 [0.46] 1. [0.48] 50KL [0.75] 5.4 [1.00].9 [0.90] 4.1 [0.95] 50KL [0.50] to 10.0 [4.00].8 [0.11] 4.8 [0.19] 4.1 [0.95] 8.6 [3.5] 50KL31 50KL443 atalog 1.7 [0.50] to 95. [3.75] 41.3 [1.63] to 38.1 [1.50] 7.4 [0.9] 6.6 [0.6] 8.1 [0.3] 95. [3.75] Roller iameter Roller Width 50KL [1.50] 17.5 [0.69] 6.4 [0.5].0 [0.08] 3.6 [0.14] 50KL [1.50] 19.0 [0.75] 8.1 [0.3] 4.1 [0.16] 5.1 [0.0] 50KL [1.50] 19.0 [0.75] 8.1 [0.3] 4.1 [0.16] 5.1 [0.0] 50KL [1.50] 19.0 [0.75] 5.4 [1.00] 1.3 [0.84].4 [0.88] atalog Roller iameter Roller Width F G 50KL [1.50] 17.5 [0.69] 6.4 [0.5].0 [0.08] 3.6 [0.14] 16.3 [0.64] 17.8 [0.70] 50KL [1.50] 19.0 [0.75] 8.1 [0.3] 4.1 [0.16] 5.1 [0.0] 18.5 [0.73] 19.6 [0.77] 50KL [1.50] 19.0 [0.75] 8.1 [0.3] 4.1 [0.16] 5.1 [0.0] 18.5 [0.73] 19.6 [0.77] V8-T-86 Volume 8 Sensing Solutions May 013

8 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic lectrical Mechanical (800) pproximate imensions in Inches or mm [in] Rod Type xt. [.5] ia [1.1] djustable Rod atalog Spring Rod 50KL556 Spring Rod 50KL41 djustable Wire djustable Wide Roller Lever Nylatron Loop 50KL14 ye olt [4.19] 4. [.164] [1.1] [.5] 1 pplies when lever is extended to the maximum dimension. Length from the operating shaft axis to tip. Rod Length 1 Rod iameter 50KL [5.50] 4.8 [0.19] 50KL0 3. [0.1] 50KL581.0 [8.75] Rod size (square): 3. [0.1] x 3. [0.1] 50KL0 9.0 [9.00] 4.8 [0.19] 50KL [1.00] 3. [0.1] [9.76] [1.1] [.5] ia. [.5] Nylon [1.1] 19.1 ia. [.75] 48.3 [1.90] 8.1 [.3].9R [.90] [1.15] +.05 ia [6.00] [.0].9 [.90] 4.0 [.158] ia [5.50] [11.6] [.5] 8.6 [9.0] 0.44 [11] atalog.9 [0.9] ia. Steel Spring Rod [1.1] [17] Rod Length Rod iameter [1.1] xt [1.1] 50KL [1.50] 4.8 [0.1875] Loop I: 9.5 [0.375] [.5] 6.6 [.6] 3.05 [.1] ia. Nylon 1.5 [.06] ia. Steelcore [1.1] Rod Width [0.5] 8.6 [0.34] Volume 8 Sensing Solutions May V8-T-87

9 ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic lectrical Mechanical (800) Wobble Type Nylon Rod Stainless Steel Rod oil Spring ia [.81] [4.90] 1.60 [.063] ia [13.64] 8.74 ia. [.344] [5.76] V8-T-88 Volume 8 Sensing Solutions May 013