GRAVEL~ 5000 SERIES TRACTORS ILLUSTRATED PARTS LIST. Form No (6-80) Printed in U.S.A.

Transcription

1 GRAVEL~ 5000 SERES TRACTORS LLUSTRATED PARTS LST Form No (6-80) Printed in U.S.A.

2 TO CONTNUE TS PROGRAM OF QUALTY AND DESGN MPROVEMENTS, THE MANUFACTURER RESERVES THE RGHT TO CHANGE SPECFCATONS, DESGNS AND PRCES WTHOUT NOTCE AND WTHOUT NCURRNG OBLGATON. THE MANUFACTURER ALSO RESERVES THE RGHT TO SHP WTHOUT NOTCE AND WTHOUT NCURRNG OBLGATON. ~GRAVELY Gravely Division, McGraw-Edison Company One Gravely Lane, Clemmons, NC 27012

3 5000 SERES TRACTORS LLUSTRATED PARTS LST Form No (6-80) Printed in U.S.A. Page Wheel Assemblies... 1 Transmission Standard Differential Swiftamatic Frame For Models 5200,5210 and Frame For Models 5260,5265, 5460, 5645, 5660 and Controls Remote Air Cleaner Engine and Exhaust System Electric System 5265 and Electric System 5260, 5460 and Wiring Diagram 5260,5460 and Wiring Diagram 5265 and

4 TEM NO. PART NO. QTY Hub, Wheel Spacer Nut, 3/4-10 Light Thin Hex Nut, Jam; 3/8-16 Hex Disc, nner, Wheel Tube, 500 x 8 Tire, Tractor; Diamond Tread Tire, Tractor; Ground Grip Tire, Semi-Pneumatic; 16 x SW x 3 Firestone Disc, Wheel Bolt, Hex; 3/8-16 x 5/8 Bolt, Hex; 3/8-16 x.750 Assembly, Super Grip Wheel Assembly, Diamond Tread Wheel Tire, Wheel Assembly; 18 x Wheel, Semi-Pneumatic Assembly Washer, Lock; 3/8 SP Rim, 18 x Bolt, Hex; 1/2-13 x 1.25 Assembly, Valve Stem Tire, Rear 408 Assembly, Wheel; 18 x 8.50 x 8 Nut, Lock; 1/2-13 Washer nsert Hub, 7" Wheel Washer, Flat;.812 x x.134

5 TEM NO. PART NO. Qr. DESCRPTON Spacer, Rear Gear, Rear Ring Assembly, Clutch Cup Rod, Rear L.H. Clutch Slide Rod, Rear R.H. Clutch Slide Bolt, Orbit Gear Nut, Lock; 5/16-18 L.H. Thread Assembly, External Orbit Gear Spacer, Pin Pin, Hi-La Orbit Gear Bushing,.501 x.627 x Assembly, nternal Orbit Gear Bush ing,.737 x.877 x Assembly, Planet Gear Carrier Bushing, x x Assembly, Ring Gear and Bushing Plate, Rear Thrust Chasis Plug, Oil Filter O-Ring;.750 x Bushing,.750 x x Key, Woodruff;.125 x.625 Hard Shaft, Actuating Washer, Flat; x.063

6 TEM NO. PART NO. QX. DESCRPTON Bolt, Hex; 1/4-20 x Cup, Roller Bearing Cone, Roller Bearing Assembly, Clutch Attachment Weldment, 6-Lead Worm Weldment, 4-Lead Worm Weldment, 8-Lead Worm Ring, Steel Retaining;.978 x x Cone, Roller Bearing Cup, Roller Bearing Nut, Bearing Adjustment Spacer, Spring Pin Plate Nut, Adjusting Bolt, Hex; 1/4-20 x Plate, Front Pin Gear, Sun Pinion Spur Assembly, Quill and Bushing Casting, Advance Nut, Hex; 1/ Bushing,.875 x x Gear, Orbit Spur Pin, Fwd-Rev Orbit Gear Steel Spacer, Front Pin Bolt, Spacer (Right Hand) Bolt, Reverse dler Bushing, Reverse dler;.375 x.685 x Gear, Reverse dler Spur Cup, Gear Gear, nternal Spur Assembly, Dipstick Rod, L.H. Clutch Slide Rod, R.H. Clutch Slide Cone, Reverse Gear Assembly, Thrust Bushing Gasket, Chassis Front Pin, Roll Shaft, Pinion Dog, Attachment Bolt, Hex; 5/16-18 x 2-1/ Gasket, Shipper Shaft Shaft, Shipper Guide, Shipper Shaft Nut, Lock; 5/16-18 Washer nsert Hex Block, Trunnion Body, Shipper Shaft Dowel, Shifter Body Screw, Set; 3/8-16 x 1/4 Hex Socket Bolt, Hex; 5/16-24 x 1-3/ Spring Nut, Lock 5/ Plate, Dog Washer, Friction Bolt, Hex 5/16-18 x Assembly, Fwd-Rev Planetary Assembly, Hi-La Planetary Guide, Dipstick Spacer, Shipper Shaft Guide Arm, Shiller Spacer, Strap Plate, Drive Shaft, Quick Hitch Nut, Jam; 5/ Assembly, Fwd-Rev Lever Plate, Back Assembly, Hi-La Lever Bolt, Hex; 1/2-13 x Stud, Quick Hitch Bearing, Thrust; x x Bearing, Needle; x x Adapter, Quick Hitch Bearing, Ball; x x Nut, Hex; 1/ Stud, Quick Hitch Washer, Flat;.812 x x Pin, Klik Pin, Quick Hitch Washer, Flat;.656 x x Bolt, Hex; 3/8-16 x 2-1/ Washer, Lock; 3/8 SP Gasket Bolt, Hex; 1/2-13 x 1 NOTE; Circle "A" Pertains to Commercial Tractors Only 3

7 "

8 TEM NO. PART NO. QTY. DESCRPTON Block, Drive Gear, Spider Bevel Pin, Spider Pinion Gear, 4-Lead Worm Gear, 6 Start Worm Key, Woodruff;.125 x.375 Hard Seal, Oil; x x Gear, 'Differential Bevel Housing, Differential Cone, Roller Bearing Cup, Roller Bearing Nut, Hex; 5/ Washer, Lock; 5/16 n!. Tooth Bolt, Hex; 5/16-24 x 2-3/ Nut, 3/4-10 Light Thin Hex Hub, Wheel Bolt, Hex; 3/8-16 x Spacer Spacer Plate, End Bearing, Ball; x x Ring, Retaining; Bore Shim, Axle Housing; Shim, Axle Housing; Axle, Straight Bolt, Hex; 1/2-13 x Bolt, Hex; 1/2-13 x 1 Nylon nsert Washer, Flat;.500 x x Washer, Oil Drain Washer, Lock; 1/2 SP Housing, Axle Gasket, Axle Housing Washer, Flat;.812 x x.134

9 <~ 58~ \ '>4~/, \ 27~\ \ \ \ // 62~ 41 h 64\!' tv'\..4?)(js' ~" 61-,.(j-_;."",-.(~~\t')\:J..r ( 63~ 60 ", ' " '... " " " ' A li@ ~2 3~4 ~~O 67 6 ~ Q]

10 =i Ring, Retaining;.750 Shaft Spacer,.765 x x.200 Bearing, Needle Thrust;.752 x x.078 Gear, Differential Shifting Bevel Pin, Dcwel;.375 x.375 Gear, Spider Bevel Gear, Differential Bevel Bolt, Special; 5/16-18 Wire, Bolt Gear, Worm 8 Start Pin, Spider Shifter, Splined Finned Spacer Washer, Flat;.344 x.688 x.065 Gear, Pinned Bevel Pin, Dowel;.375 x.500 Housing, Pinned Cone, Roller Bearing Cup, Roller Bearing Bolt, Hex; 3/8-16 x.750 Spacer Plate, End Bearing, Ball; x x.562 Ring, Retaining; Bore Seal, Oil; x x.250 Race, Thrust; x x.031 Arm, Shifter Bolt, Hex; 1/2-13 x 1 Nylon nsert Washer, Flat;.500 x x.095 Washer, Oil Drain Axle, straight Bolt, Hex; 1/2-13 x 1 Washer, Lock; 1/2 SP Housing, Axle Gasket, Axle Housing Shim, Axle Housing;.005 Shim, Axle Housing;.020 Nut, Lock; 5/16-18 Washer nsert Hex Bushing, Nylon;.375 x.503 x.875 Race, Bearing Thrust;.060 Spring, Compression; 2 x.720 x 15.5 LB/in Shim, Clutch Worm Gear;.005 Shim, Clutch Worm Gear;.020 Housing, Clutch Cone, Roller Bearing Cup, Roller Bearing Nut, 3/4-10 Light Thin Hex Hub, Wheel Hub, 7" Wheel Clutch, Shifting Yoke, Shifting Clutch, Stationary Housing, Axle; 2-Speed Washer, Oil Strainer Nut Bolt, Stationary Clutch Pivot, Stationary a-ring;.438 x.625 x.094 Pin, Clutch Sliding Nut, Lock; 1/4-20 Washer nsert Bushing Bolt, 1/4-20 x 3-1/4 Grade 8 Plated Spring, Extension; 2.50 x.62 x 5.8 LB/in Nut, Jam; 3/8-24 Hex Bracket, 2-Speed Spring Washer, Flat;.406 x.812 x.065 LB/in Washer, Flat;.281 x.625 x.065 Washer, Flat;.812 x x.134 Pin, Spider Race Bearing Thrust.060 NOTE: Circle A l Pertains to Tractor Mode-l-s 5240, 5260, 5460 and 5660

11 FRAME FOR MODELS 5200, 5210 AND 5240 ~ 28 2 ~1

12 TEM NO. PART NO. QTY. DESCRPTON Cotter, Hair Pin Stand, Weldrnent Handle, Adjusting Bolt, Hex; 3/8-16 x Nut, Lock; 3/8-16 Washer nsert Hex Hitch, Weldment; 8 H.P Hitch, Weldment; 10 & 12 H.P Stud, Hood Support, Tube Bolt, Hex; 3/8-16 x 2-1/ Stop, Rod Brace, Handle Nut, Hex; 1/ Bolt, Hex; 1/4-20 x Panel, nstrument Manual Bar, Right Handle Washer, Flat;.406 x.812 x Pivot, Hood Stripe, R. H. Side Consumer Walker Stripe, L. H. Side Consumer Walker Decal, Model Decal, Model Decal, Model Hood, Conunercial Bolt, Hex; 1/2-20 x Screw, Mach, 6-32 x 5/8 Pan HD C-Recess Nut, Hex; 5/ Washer, Lock; 5/8 SP Bumper Nut, Mach Lock; 6-32 Washer nsert Washer, Flat;.656 x x Grip, Hand Bolt, Hex, 5/8-11 x 1-1/ Bar, Left Handle Decal, Gravely Logo Brace, nstrument Panel Nut, Lock, 1/4-20 Washer nsert Retainer, 2-Speed Control Bolt, Hex; 3/8-16 x 2-1/2 NOTE: tem Numbers 13, 32, 33, 34, 34 Pertains to Tractor Model 5240

13 FRAME FOR MODELS 5260, 5265, 5460, 5645, 5660 AND 5665 ~ 41 sot 5 ~48

14 TEM NO. PART NO. ~ DESCRPTON Washer, Flat;.281 x.625 x Nut, Lock; 3/8-16 Washer nsert Hex Screw, Mach; 1/4-20 x 1 Pan HD Bolt, Hex; 3/8-16 x 1-1/ Hitch, Weldment; 8 H.P Hitch, Weldment; 10 & 12 H.P Bolt, Hex; 5/8-11 x 1-1/ Washer, Flat;.656 x x Screw, Mach; 6-32 x 5/8 Pan HD C-Recess Bumper Nut, Mach Lock; 6-32 Washer nsert Washer, Flat; A06 x.812 x nstrument Panel, Commercial nstrument Panel, Consumer Boll, Hex; 1/2-20 x Nut, Hex; 5/ Washer, Lock; 5/8 SP Cover 1.0 x.125 x Nut, Lock; 1/4-20 Washer nsert Nut, Hex; 1/ Cap, Gas Tank Assembly, Fuel Tank Bolt, Hex; 3/8-16 x 2-1/ Hood Brace, Handle Stop, Rod Washer, Lock; 7/16 SP Heavy Bolt, Hex; 7/16 x 1-1/ Support, Tube Bolt, Hex; 3/8-16 x 1-7/ Weldment, Fuel Tank Bracket Decal, Gravely Logo Bolt, Hex; 1/4-20 x 1-1/ Strap, Fuel Tank Valve and Strainer Clamp, Fuel Hose t. Line, Fuel.50 OD x.25 D x Bulk Length Bracket, Fuel Line Boll, Hex; 3/8-16 x Washer, Lock; 3/8 SP Bar, Right Handle Bar, Left Handle Grip, Hand Decal, Model 5265: Commercial Decal, Model 5665; Commercial Decal, Model Decal, Model Decal, Model 5645; Commercial Decal, Model Decal, Side Stripes Commercial Decal, Side Stripes Consumer Decal, Electrical System Warning Pivot, Hood Decal, Comm. Front Weldment, Grille Cotter, Hair Pin Washer, Flat; A69 x.938 x Handle, Adjusting Stand, Weldment Boll, Hex; 1/4-20 x Boll, Hex; 3/8-16 x 2-1/ Brace, nstrument Panel Retainer, 2-Speed Control NOTE: tem Numbers 52 through 55 Pertains to Tractor Models 5645, 5265, 5665, 5260, 5460 and 5660.

15 ~4 J / ' (j ~

16 TEM NO. PART NO. Q:L DESCRPTON Jam; 3/8-16 Hex Pi n, Cotter;.094 x Washer, Flat;.406 x.812 x Assembly, Hi-Lo Lever Assembly, Fwd-Rev Lever Spring, Fwd-Rev Neutral Return Rod, Control Extension Nut, Jam; 1/ Lever, Actuating Shall Rod, Attachment Pin, Spring;.094 x Handle; Rubber Shiller Rod, Fwd-Rev Control Rod, Hi-Lo Control Pin, Clevis;.375 x Knob, Control Rod, Shiller Nut, Jam; 7/16-20 Hex Pin, Cotter;.125 x Bolt, Hex; 1/2-13 x 3-1/ Washer, Flat;.500 x x Support, Hi-Lo Shifter Rod Support, Forward-Reverse Shiller Rod Pin, Spring; 1/4 x 1-1/ Nut, Lock; Washer nsert Nut Pivot, Handle Lever Clip, Conduit Decal, Gear Shill Screw, Mach; x 1-1/2 Pan HD Lever, Throttle Control; 8 H.P Lever, Throttle Control; 10 & 12 H.P Decal, Throttle Decal, Fwd-Rev Nut, Jam; 3/8-24 Hex Control, Choke Nut, Lock 5/16-18 Hex HD Washer nsert Bolt, Hex 5/16-18 x 2.00 NOTE: tem Numbers 9 and 11 Pertains to Tractor Models 5240, 5645, 5260, 5460, 5660, 5265 and 5665.

17 REMOTE AR CLEANERS FOR MODELS 5265, 5645 AND Gasket, Air Cleaner Elbow Elbow, Air Cleaner Screw, Mach; 8-32 x 2-3/4 Pan HD Gasket, Air Cleaner Elbow Elbow, Air Cleaner Clamp, 2.25 Dia. Hose Washer, Copper;.219 x.500 x.049 Screw, Mach; x 3 Pan HD Hose, Air Cleaner Nut, Lock; 3/8-16 Washer nsert Hex Bolt, Hex; 3/8-16 x 1 Bracket, Air Cleaner to Tractor Bracket, Air Cleaner Unloader, Dust Clamp, Air Cleaner Housing, Lower Filter, Element Housing, Upper Bolt, Special Air Cleaner Washer, Sealing Nut, Lock; 1/4-20 Washer nsert Support, Remote Air Cleaner Washer, Flat;.281 x.625 x.065 Gasket, Air Cleaner Bolt, Hex; 3/8-16 x 1-1/8 Plug, Pipe; 1/8 in. SO HD Steel

18 Bolt, Hex; 7/16-14 x 1-1/2 Bolt, Hex; 3/8-16 x 7/8, 8 H.P. Bolt, Hex; 3/8-16 x 1, 10 & 12 H.P. Washer, Lock; 3/8 SP Heavy Washer, Lock; 7/16 SP Heavy Adapter, Engine; 8 H.P. Adapter, Engine; 10 & 12 H.P. Washer, Flat;.469 x.938 x.065 Gasket, Chassis to Adapter Gasket, Engine to Adapter, 10 & 12 H.P. Gasket, Engine to Adapter, 8 H.P. Key, Woodruff; 5/32 x 5/8 Hard Engine, 12 H.P. 2-Wheel Electric Commercial Engine, 10 H.P. 2-Wheel Electric Consumer Engine, 12 H.P. 2-Wheel Manual Commercial Engine, 12 H.P. 2-Wheel Electric Consumer Clip, Speed Bracket Screw, Mach; 1/4-20 x 1/2 Pan HD C-Recess Nut, Hex; 1/4-20 Adapter, Conduit Nut, Conduit; 1 Pipe Tube, Muffler Kohler ; 10 & 12 H.P. Muffler, 10 & 12 H.P. Engine, 8 H.P. 2-Wheel Manual Commercial Engine, 8 H.P. 2-Wheel Manual Consumer Engine, 8 H.P. 2-Wheel Electric Commercial Engine, 8 H.P. 2-Wheel Electric Consumer Gear, 10/12 DP 21/30 Teeth Screw, Mach; x 1/2 Pan HD C-Recess Clip Nut, Lock; Washer nsert Bracket, Fuel Line Bolt, Hex; 7/16-14 x 1-1/4

19 ELECTRC SYSTEM 5265 AND f ~17., () TEM NO. PART NO. QTY. DESCRPTON Weldment, Grille Bolt, Hold-Down Washer, Flat; 5/16 x 7/8 x Clamp, Battery Hold-Down Nut, Wing; 1/4-20 Washer nsert Cable, Negative Battery Battery, 12V Bolt, Hex; 1/4-20 x 1-3/ Bolt, Hexi 1/4-20 x 3/ Regulator, Rectifier Nut, Hexi 1/ Cable, Positive Battery Switch, Mag; Delco 1466, Prestolite E Cable, Mag Switch to Starter Switch, gnitioni ndak J463-A Washer, Lock; 9/16 nt. Tooth ndak Nut, Jam; 9/16-24 ndak Key, gnition Switch Assembly, nstrument Panel; Commercial Fuse, 30 AMP Acc Harness, Wiring; 5000 Series 15 AMP Tie, Cable Hourmeter Wire, nstrument Panel Gauge, Ammeter

20 ELECTRC SYSTEM 5260, 5460 AND 5660 A 9 ~ C@.10 (123 ~ 7 TEM NO. PART NO. QTY. DESCRPTON Weldment, Grille Bolt, Hold-Down Washer, Flat; 5/16 x 7/8 x Clamp, Battery Hold-Down Nut, Wing; 1/4-20 Washer nsert Cable, Negative Battery Battery, 12V Bolt, Hex; 1/4-20 x 1-3/ Nut, Jam; 5/ Washer, Lock; 5/8 n!. Tooth Nut, Hex; 1/ Cable, Positive Battery Switch, Magnetic Cable, Magnetic Switch to Starter Switch, gnition Washer, Lock; 9/16 nt. Tooth Nut, Jam; 9/ Key, gnition Switch Panel, nstrument Fuse, 3 AMP; 3 AG Harness, Wiring; 5000 Series 3 AMP Tie, Cable Switch, gnition 17 NOTE: Circle "A" Pertains' to All Manual Start Tractors _/

21 W WRNG DAGRAM 5260, 5460 AND 5660 WRNG DAGRAM 5265 AND 5665 ENGNE il 1'1 l1eo ; 0- :r ~ ~OH