SOLO SEATS WITH OPTIONAL EZ GLIDE BACKREST SYSTEM

Transcription

1 NOVEMBER w/optional backrest w/optional backrest SOLO SEATS WITH OPTIONAL EZ GLIDE BACKREST SYSTEM Solar-reflective leather in the seating area and automotivegrade vinyl on the sides; patented process reduces surface temperature by as much as 25 F for a cooler seat, higher durability and longer life over conventional leather or vinyl Flexible urethane foam for maximum comfort 3 /16 ABS thermoformed seat base with carpeted bottom and rubber bumpers to protect paint Lower rider 1 1 /2 from stock seat Optional backrests feature solar-reflective leather cover and multiple detents with virtually no metal-to-metal contact for vertical and fore/aft pad adjustment EZ Glide II backrest measures 9 W x 5 1 /4 H and does not include a pouch; EZ Glide III backrest measures 10 W x 7 1 /2 H and includes a pouch on the backside of the pad The Convertible EZ Glide II backrest includes a rain cover that pulls out of a pouch on the backside of the pad and covers the entire seat Optional Rear Seat/pillion seat are also available in matching styles and two sizes SOLO SEATS FOR FXST, FLST MODELS Smooth $ Flame stitch OPTIONAL REAR SEAT/PILLION PADS FOR FXST, FLST MODELS Narrow smooth (11 L x 7 1 /2 W) Narrow flame stitch (11 L x 7 1 /2 W) Wide smooth (11 L x 9 W) Wide flame stitch (11 L x 9 W) Backrest adjustable: fore/aft Remove from pouch Back view Pull around perimeter of seat to secure OPTIONAL BACKRESTS EZ Glide II backrest (w/o pouch, w/o rain cover) (9 W x 5 H) $ EZ Glide III backrest (w/ pouch, w/o rain cover) (10 W x 7 1 /2 H) The Convertible EZ Glide II backrest (w/ pouch and rain cover) (10 W x 7 1 /2 H) SOLO SEATS Solar-reflective leather in the seating area and automotive-grade vinyl on the sides; patented process reduces surface temperature by as much as 25 F for a cooler seat, higher durability and longer life over conventional leather or vinyl (unless noted) Molded polyurethane foam interior Thermoformed ABS-plastic seat base for perfect fit Fully carpeted bottom with rubber bumper to protect paint Use stock fender mount holes Instructions and all necessary hardware included NOTE: Rear fender for FXSTD must be drilled (nut kit for fender included). FOR FXST, FLST MODELS (EXCEPT FXSTD, FLSTN, FLSTF, FOR FXSTD MODELS (18 L X 11 W X 2 H) FLSTB) (18 L X 11 W X 1 1 /2 H) Smooth $ Smooth $ Flame stitch Flame stitch

2 VANCE & HINES Our friend Terry Vance and the rest of the crew at Vance & Hines continue to amaze H-D owners everywhere with their industry-leading selection of high-quality exhausts and accessories. Riders know that V&H products fit right, sound great and will look exceptional for as long as they own their bike. There is no other exhaust manufacturer with a more across-the-board trusted reputation. Always in stock and ready to go order anytime for our quick-ship service DRESSER DUALS Independent 1 3 /4 header pipe system for maximum performance Include 220 full-length 2 1 /8 heat shields Allow the use of any OEM-style mufflers Perfect complement to the Vance & Hines Slip-on mufflers (sold separately) Available in chrome or black ceramic finish NOTE: Non-sensor applications will require O 2 sensor port plug kit PART # (sold separately) FOR FLT, FLTR, FLHR, FLHT, FLHX MODELS Chrome $ Black CHROME SHORTSHOTS OTS STAGGEREDED A revolution in blue-proof exhaust technology, Vance &Hines delivers the short, fat, straight-pipe look with twin slash-cut ends High style and performance combined with unbeatable value 1 3 /4 headpipes with 220 coverage chrome heat shields Includes removable baffles, mounting hardware and instructions For XL models $

3 ROUND TWIN SLASH SLIP-ON MUFFLERS Feature muffler bodies shielded by full-coverage heat shields for a blue-proof look Increased performance with a throaty growl Include standard louvered core baffles FOR 11 FXS BLACKLINE Chrome $ Black Left side Right side BAGGER WERX PREASSEMBLED 11/4 APE HANGER HANDLEBAR KITS Save time and money by getting bars, hand controls, switches and grips already pre-wired and preassembled ready to mount 1 1 /4 swaged smooth handlebars made of heavy-duty.120 thick wall tubing Handlebar clamping area is stepped down to 1 diam. and knurled to accommodate most risers (3 1 /2 on-center knurling) Ready to install; fully assembled with 60 long internal wiring Available in all black powder-coat: black bars with black switches/housings and black grips Choose from 14 or 17 high bars with either 9 /16 bore master cylinder for Single-Disc application or 11 /16 bore master cylinder for Dual-Disc application Notched for Throttle By Wire (Electronic Throttle Control) applications Note: Not available for hydraulic clutch application. FOR FXST/FLST/FXCW/FXCWC (EXC. SPRINGERS), DYNA GLIDE, FLHR, FLTR (WITHOUT RADIO, C.B. AND CRUISE) AND XL PART # DESCRIPTION WIDTH CENTER WIDTH PULLBACK SUG. RETAIL SINGLE-DISC MODELS WITH 9 /16 BRAKE MASTER CYLINDER Standard Ape Hanger 33 3 / $ Standard Ape Hanger 33 3 / DUAL-DISC MODELS WITH 11 /16 BRAKE MASTER CYLINDER Standard Ape Hanger 33 3 / Standard Ape Hanger 33 3 / GLOSS BLACK WIND GUARDS Mount easily to front fork brackets Deflect wind away from legs and feet For FLT/FLHT/FLHR/FLHS; repl. OEM # B $ Not for models equipped with fairing lowers or lighted fork slide kit. OLD SKOOL GRIPS Old skool knurled look Fit all 1 handlebars Available in brass or black KNURLED FOR MODELS (EXCEPT DRESSER, H-D FL TRIKE AND MODELS WITH HANDLEBAR AIR RESERVOIR) Brass $ Black

4 DANNY GRAY SEATS For over 35 years Danny Gray has been recognized as the premiere seat for American V-Twins. They have now taken their seats to a new level of comfort and function with the addition of the Airhawk Comfort Seating System. This adjustable-on-the-fly system incorporates proven medical technology to better distribute weight, reduce hotspots and absorb shocks no matter what changing conditions driver and passenger encounter. Have some ready for your serious riders to try on. AIRHAWK LONGHAUL 2-UP XL SEAT WITH DRIVER S BACKREST CAPABILITY Designed with wider seating surfaces and generous back support, this seat was made for the long haul Driver and passenger portion of seat each have two inflatable air cells The Airhawk s Comfort Seating System is now integrated into the seat The result is the custom design and production capabilities of Danny Gray with Airhawk s clinician-approved Dry flotation technology Airhawk s patented system eliminates painful pressure points and is fully customizable to each rider s contour Now, riders can enjoy the same benefits they ve always known of Airhawk but have it built into a revolutionary seat With this patent-pending design, riders can also appreciate continuous airflow through the seat, reducing heat build-up and keeping them cool and dry; no hot seat An integrated pump and relief valve makes it possible to adjust the air pressure while seated Each Seat is embroidered with the exclusive Drag Specialties Custom Stitch Pattern using Charcoal Gray Thread Optional backrests (sold separately) provide additional comfort for any length ride Small backrests measure 9 W x 5 T; large backrests measure 10 W x 8 T OPTIONAL DRIVER BACKRESTS FOR FLHT, FLHR, FLHX, FLTR Small $ Drag Stitch pattern $ Large AIRHAWK LONGHAUL 2-UP XL SEAT Designed with wider seating surfaces and generous back support, this seat was made for the long haul Seat has two inflatable air cells The Airhawk s Comfort Seating System is now integrated into the seat The result is the custom design and production capabilities of Danny Gray with Airhawk s clinician-approved Dry flotation technology Airhawk s patented system eliminates painful pressure points and is fully customizable to each rider s contour Now, riders can enjoy the same benefits they ve always known of Airhawk but have it built into a revolutionary seat With this patent-pending design, riders can also appreciate continuous airflow through the seat, reducing heat build-up and keeping them cool and dry no hot seat An integrated pump and relief valve makes it possible to adjust the air pressure while seated Each seat is embroidered with the exclusive Drag Specialties Custom Stitch Pattern using Charcoal Gray Thread AIRHAWK WEEKDAY 2-UP XL SEAT WITH DRIVER S BACKREST CAPABILITY The ultimate in low profile touring just got pumped up Driver and passenger portion of seat each has two inflatable air cells The Airhawk s Comfort Seating System is now integrated into the seat The result is the custom design and production capabilities of Danny Gray with Airhawk s clinician-approved Dry flotation technology Airhawk s patented system eliminates painful pressure points and is fully customizable to each rider s contour Now, riders can enjoy the same benefits they ve always known of Airhawk but have it built into a revolutionary seat FOR FLHT, FLHR, FLHX, FLTR W/ backrest receptacle $ W/o backrest receptacle FOR FLHT, FLHR, FLHX, FLTR Drag Stitch pattern $ With this patent-pending design, riders can also appreciate continuous airflow through the seat, reducing heat build-up and keeping them cool and dry; no hot seat An integrated pump and relief valve makes it possible to adjust the air pressure while seatedt Each seat is embroidered with the exclusive Drag Specialties Custom Stitch Pattern using Charcoal Gray Thread Optional backrests (sold separately) provide additional comfort for any length ride Small backrests measure 9 W x 5 T; large backrests measure 10 W x 8 T OPTIONAL DRIVER BACKRESTS Small $ Large

5 AIRHAWK BIGSEAT AND BIGSEAT BACKREST SOLO SEATS This is the next generation of the renowned Danny Gray Big Seat Seat has two inflatable air cells in the driver s portion The Airhawk s Comfort Seating System is now integrated into the seat FOR FLHT, FLHR, FLHX, FLTR Bigseat Backrest $ Bigseat Opt. pillion pad The result is the custom design and production capabilities of Danny Gray with Airhawk s clinician-approved Dry flotation technology Airhawk s patented system eliminates painful pressure points and is fully customizable to each rider s contour Now, riders can enjoy the same benefits they ve always known of Airhawk but have it built into a revolutionary seat With this patent-pending design, riders can also appreciate continuous airflow through the seat, reducing heat build-up and keeping them cool and dry; no hot seat An integrated pump and relief valve make it possible to adjust the air pressure while seated Each seat is embroidered with the exclusive Drag Specialties Custom Stitch Pattern using Charcoal Gray Thread Optional pillion pads and backrests (sold separately) provide additional comfort for any length ride Small backrests measure 9 W x 5 T; large backrests measure 10 W x 8 T OPTIONAL BACKRESTS Small backrest $ Large backrest COOL MAGIC BILLET BULLET LED DRIVING LIGHTS Made from 6061 T-6 billet aluminum with a show chrome finish Body dimensions: L x 2.25 diameter, 3 /8-16 mounting stud Do not get hot like halogen bulbs and only draw 6 watts of power as compared to 20W-50W in most Halogen Driving lights With no filament, there are no worries about vibration burning them out Crisp, clean, pure white output will match most HID headlamps and give your bike a clean look Three super-flux 2-watt high-output LEDs (6 watts total) Low current draw 30 pattern Light output equivalent to 50-watt halogen bulbs Cool Magic billet Bullet LED driving lights $ STREET MAGIC DUAL-COLOR LED BILLET BULLET DRIVING LIGHTS Aircraft-grade 6061 T-6 billet aluminum with a show-chrome finish 48 Genesis LEDs in a double O-ring design Dual-intensity Red LED running and brake light combined with a outer ring of Amber LED Turn signals Stainless-steel mounting hardware L x 2.25 diameter 3 /8-16 mounting stud Street Magic dual-color LED billet bullet driving lights $ TRUWRAPZ LED FORK TURN SIGNALS A simple, easy to install full-function LED fork wrap-around turn signals that can be installed in approximately 30 minutes or less Feature all of the TruFLEX advantages plus Eclipze2 module Dual-intensity running and turn signal Genesis LEDs or connect as turn signal only for European use Amber LEDs with choice of clear, amber or smoke tubing LEDs function with 4-way hazards and alarms when bike is on or off Includes six Posi-Taps for simple tap-in installation or solder connectors with enclosed adhesive-lined heat shrink tubing Also include stainless steel wire loom and chrome tie wraps for a professional, clean installation Measure 0.34 W x 0.30 H FOR 39MM FORKS Amber $ Smoke FOR 41MM FORKS Amber Smoke PART # DESCRIPTIONION SUG. RETAIL FOR 43MM FORKS Amber $ Smoke FOR 49MM FORKS Amber Smoke

6 RC COMPONENTS As you read this we are loading up our warehouses and the 2012 FatBook with all the latest styles from the founder/president Rick Ball and the other folks at RC Components. Known worldwide for their unmatched quality and style, these are components that both custom builders and backyard customizers will ask for by name. Speak with your rep today for all the latest information and watch for the 2012 FatBook to arrive with our full line-up. ONE-PIECE FORGED ALUMINUM DRIFTER WHEELS Made from the highest-quality forged aluminum to create a strong and durable wheel CNC-machined and quality tested to ensure finest product possible Available in a chrome finish NOTE: See your sales rep and the 2012 FatBook for complete offering. Front Rear DESCRIPTION PART # SUG. RETAIL FRONT WHEELS 18 x 3.5 For FLHT, FLTR, FLHR, FLHX (w/o ABS) $1, x 3.5 For FLTR, FLHT, FLHX, FLHR (w/ ABS) , x 3.5 Dual disc for FLTR, FLHT, FLHX, FLHR (w/ ABS) , x 3.5 Single disc for FLHT, FLTR, FLHR, FLHX (w/o ABS) , x 3.5 Dual disc for FLHT, FLTR, FLHR, FLHX (w/o ABS) , x 3.75 Single disc for FLTR, FLHT, FLHR, FLHX w/ ABS , x 3.75 Dual disc for FLTR, FLHT, FLHR, FLHX w/ ABS , x 3.75 Single disc for FLTR, FLHT, FLHR, FLHX w/o ABS , x 3.75 Dual disc for FLTR, FLHT, FLHR, FLHX w/o ABS , DESCRIPTION PART # SUG. RETAIL REAR WHEELS 16 x 3.5 For 08 FLHT, FLHR, FLT, FLTR, FLHX (w/o ABS) $1, x 6.25 For FLHT, FLHR, FLHX, FLTR for OEM pulley (w/o ABS) , x 6.25 For FLHT, FLHR, FLHX, FLTR for OEM pulley (w/ ABS) , x 4.25 For 08 FLHT, FLHR, FLTR, FLHX (w/o ABS) , x 5.5 For FLHT, FLHR, FLTR, FLHX for OEM pulley (w/ ABS) , x 5.5 For FLHT, FLHR, FLTR, FLHX for OEM pulley (w/o ABS) , ONE-PIECE REAR DRIFTER BRAKE ROTOR Fully polished stainless steel rotor is CNC-machined and quality tested Rotor matches RC Components Drifter wheels For FLHT, FLHR, FLHX, FLTR (except H-D FL Trikes) $ DRIFTER FLOATING ROTORS CNC-machined precision cut with the highest quality billet aluminum carrier wrapped with a 440 stainless steel band Carrier features a chrome finish DESCRIPTION PART # SUG. RETAIL FOR DYNA, V-ROD, FLHT, FLHR, FLHX, FLTR AND H-D FL TRIKES 11.8 left front $ right front FOR MODELS (EXCEPT SPRINGERS, DRESSERS, H-D FL TRIKES, DYNA AND V-ROD) 11.5 right rear DRIFTER FLOATING FRONT ROTOR CNC precision cut with the highest quality billet aluminum carrier wrapped with a 440 stainless steel band Carrier features a chrome finish Left front application NOTE: Must use front caliper bracket or aftermarket caliper for 13 rotor; see page 861 in the 2011 FatBook For Dressers and H-D FL Trikes $

7 JAGG OIL COOLERS With some of the coolest ideas out there for keeping your customers oil running cooler, and thus their bikes lasting longer, this second generation family-run business continues to impress. Take a look at the specifications for their new Low-Mount Fan Assisted Oil Cooler Kits for FLs. Here are oil coolers that will work while stuck in traffic almost as well as rolling down the road. With simple straight-forward installation there is no reason why every Bagger shouldn t have one. LOW-MOUNT FAN-ASSISTED OIL COOLER KITS Feature the Jagg high-performance 10-row oil cooler kit with an integrated fan Designed to perform as well at low vehicle speeds and stop-and-go traffic as on the open highway Kits include cooler, sealed-motor fan, oil hose, mounting hardware, automatic thermal fan switch and wiring harness to allow simple bolt-on application with use of a Jagg offset oil filter adapter (sold separately; see 2011 Fatbook) Fan turns on automatically at approximately 205 F Fan pulls a full 150 cfm of air across cooler HyperFlow technology ensures unsurpassed flow and heat rejection NOTE: Will require the use of Jagg offset filter adapter (PART #J4600 or ) to Front access oil supply and filter adapter nipple (PART # ). Back For FLHT/FLHX/FLHR/FLTR and FL Trike models $ For FLHT/FLHX/FLHR/FLTR and FL Trike models Filter adapter nipple 9.95 AIRCHARGER PERFORMANCE INTAKE KIT K&N High-Flow air filter greatly increases performance and horsepower Mandrel bent aluminum intake tube available in a polished finish Kit includes breather assembly and all necessary mounting hardware Optional Drycharger for increased protection from the elements is available separately; PART # For XL 883/1200 $ SADDLEBAG LATCH COVERS CNC machined from billet aluminum Machine Head design Replaces the stock faceplates on touring models equipped with hard bags Retains all stock latch functions FOR FLT MODELS Gloss black powdercoat $ Chrome Black diamond edge FUEL DOORS Billet aluminum construction Feature CNC-machined Machine Head design FOR FLHT/FLHX/FLTR AND H-D FL TRIKE Gloss black powdercoat $ Chrome Black diamond edge FOR FLT/FLHT Gloss black powdercoat Chrome Black diamond edge

8 REPLACEMENT LACED WHEELS 40-spoke wheels feature chrome steel rims, chrome spokes and chrome steel hubs (unless noted) Fully assembled and trued with bearings installed and end play set Uses OEM mounting hardware; designed to use OEM style rotors and pulleys DESCRIPTION PART # SUG. RETAIL FRONT WHEELS 21x2.15 for FXST/C, FXDWG (single disc); replaces OEM # A $ x2.15 for FXR/FXD/XL (single/dual disc); replaces OEM # DESCRIPTION PART # SUG. RETAIL REAR WHEELS 16x3.5 for FXST/FLST, XL; FXR, FXD; replaces OEM # $ x3.5 for FXST/FLST, XL, FXD; replaces OEM # A DYNA SKULL COIL COVER Traditionally styled coil cover Features a chrome finish with black mesh insert Includes mounting bracket For FXD $39.95 SPADE MIRRORS Billet aluminum construction Polished chrome or satin black powder-coated finish Features flat mirror for no distortion viewing Complete with 5 /16-18 mounting bolts Chrome finish $ Satin black powder-coated finish FRONT WHEEL SPEEDO DRIVE UNIT High-quality front wheel speedometer drive unit fits a variety of H-D models For FLHT, FLHR; repl. OEM # (.400 spacer) $33.95 CHROME KICKSTANDS High-strength steel kickstands with a brilliant chrome finish Replaces OEM kickstands perfectly Shorter than stock kickstands are for bikes with lowered suspension FOR FXD/FXDWG MODELS under stock length (10 L) $49.95 ELECTRONIC SPEEDOMETER SENSOR Allows using an electronic gauge on a motorcycle with a mechanical speedometer drive gear Mounts in place of the speedometer drive cable Requires 12V electrical system Should be used with a speedometer that can be calibrated Electronic speedometer sensor $

9 BOBBED REAR FENDERS Raw steel finish Pre-drilled to accept the OEM fender struts Measures approximately 7 1 /4 W (inside) Require separate taillight/license plate bracket (not included) For XL $ For XL FRONT FENDER Heavy-duty steel construction Raw finish Smooth style does not have holes to mount trim, fender tip or fender skirts FOR FLST/FLSTC MODELS Smooth style $ SOUNDSTIK AUDIO ISOLATION TOOL Must-have tool for proper and accurate diagnostics of air, vacuum and internal mechanical issues Uses sound frequency isolation; lets you hear sounds at frequencies you can t normally hear 9 1 /2 L solid probe used for internal mechanical diagnostics Black probe used for external air, vacuum and liquid leak diagnostics Included Soni-Pod used in conjunction with SoundStik to check for leaks in Tour-Pak and saddlebags Uses included 9V battery SoundStik audio isolation tool $ PICSTIK FOR JIMS VIDEO SCOPE Easy-to-use storage device directly downloads and saves AVI video and JPEG snapshots from JIMS Video Scope (PART # ) with a push of a button Includes all necessary cables and complete instructions Uses 3 AAA batteries (included) DIPSTICK REMOVAL TOOL Allows riders and mechanics to quickly and safely remove engine oil level dipstick that lies precariously close to a scorching hot exhaust pipepe Also aids riders with limited hand strength in easily checking their oil level Has square hole for 3 /8 ratchet fitment, 7 /8 hex for wrench fitment and cutout for clearance around exhaust pipe For FLHT/FLTR/FLHR/FLHX, FXD PicStik for JIMS video scope $ W/ OEM level indicators $ STAR TRON ENZYME FUEL ADDITIVE Cures and prevents Ethanol fuel problems Makes all engines start easily and run smoothly Works in all 2- and 4-cycle engines Improves fuel economy Stabilizes gas for up to one year Removes carbon deposits; prevents new deposits from forming 32 oz. bottle treats 512 gallons of gas; 1 gallon bottle treats 2,048 gallons of gas Cannot be overdosed (EA.) gal. bottle $ oz. bottle

10 SKULL AIR CLEANER KITS Extremely rigid, high-strength composite construction Includes outer cover, backing plate, high-flow air filter element and all necessary brackets, crankcase breathers and other required hardware included Chrome or gloss black finish available Sold each CHROME For XL $ GLOSS BLACK For Twin Cam w/ CV carb or Delphi EFI (except FLHT, FLHR, FLTR, FLHX and H-D FL Trikes) For FLHT, FLHR, FLTR, FLHX and H-D FL Trikes STREET SLEEPER AIR CLEANER KIT Gain performance but keep the stock look with this high-flow air cleaner backplate Re-uses stock outer air cleaner cover Allows up to 40% more airflow with air filter designed by K&N Can support airflow for engines making up to 130 horsepower For Twin Cam w/ CV carb or Delphi EFI (except FLHT, FLHR, FLTR, FLHX and H-D FL Trikes) $ LED TAILLIGHT CONVERSION KITS Add brilliant LED style to your OEM taillight LEDs function as run/brake lights, just like the stock taillight Kits include red LED board and connectors for 98-earlier and 99-later style taillight bases Can be combined with a Küryakyn run/turn/brake controller and LED turn signal conversions for run/turn/brake applications (controller and turn signal inserts sold separately) FOR FLHX, FLHR, 09 FLTR, 09 FLHT, 05 FLHTCSE Deluxe LED taillight w/ red lens, no tag light window $ Deluxe LED taillight w/ smoke lens, no Low-profile LED taillight w/ red lens, no Low-profile LED taillight w/ smoke lens, no FOR FLHTC, FLHTCU, FLHTK; FLHT, FLTR, FLTRU, FLHRC, FLHR, FLHS, FLTC/U, FLTRSE, FLHRSE, 04 FLHTCSE, FLHTCUSE, FLTRUSE Deluxe LED taillight w/ red lens, Deluxe LED taillight w/ smoke lens, Low-profile LED taillight w/ red lens, Low-profile LED taillight w/ smoke lens, FOR FLST/C, FLSTF, FLSTFB, FLSTSB, FLSTFSE, FLSTN Deluxe LED taillight w/ red lens, Deluxe LED taillight w/ smoke lens, Low-profile LED taillight w/ red lens, Low-profile LED taillight w/ smoke lens, FOR FXST (EXCEPT FXSTD, FXSTDSE, FXSTSSE, FXCW/C) Deluxe LED taillight w/ red lens, Deluxe LED taillight w/ smoke lens, FOR FXST (EXCEPT FXSTD, FXSTDSE, FXSTSSE, FXCW/C) (CONT) Low-profile LED taillight w/ red lens, tag light window $ Low-profile LED taillight w/ smoke lens, FOR FXD (EXCEPT FXDB, FXDFSE, FXDWG) Deluxe LED taillight w/ red lens, Deluxe LED taillight w/ smoke lens, Low-profile LED taillight w/ red lens, Low-profile LED taillight w/ smoke lens, FOR FXR Deluxe LED taillight w/ red lens, Deluxe LED taillight w/ smoke lens, Low-profile LED taillight w/ red lens, Low-profile LED taillight w/ smoke lens, FOR XL (EXCEPT XL1200N, XL1200X, XL883N) Deluxe LED taillight w/ red lens, Deluxe LED taillight w/ smoke lens, Low-profile LED taillight w/ red lens, Low-profile LED taillight w/ smoke lens, 10

11 FRONT AXLE NUT COVERS Choose from multiple styles to complement or contrast with the look of your bike All fit close to the fork sliders so there are no unsightly gaps Chrome finish FOR FXST/FLST (EXCEPT DEUCE, FXCW/C AND MODELS WITH SPRINGER FRONT END); FLT/FLHT/FLHR/FLHX/FLTR AND H-D FL TRIKES, FXD (EXCEPT FXDSE), XL, V-ROD (EXCEPT VRSCR, VRSCF), FXR AND FXWG Peaked $ Roman FOR SOFTAIL (EXCEPT DEUCE, SPRINGER), 87 FLXR, FXRS-SP, FXRT; FXR, FXD, FXDWG, FLH/FLHT/FLHR/FLTR, FXWG, XL Smooth Spinning blades FOR SOFTAIL (EXCEPT DEUCE, SPRINGER), 87 FLXR, FXRS-SP, FXRT; FXR, FXD, FXDWG, FLH/FLHT/FLHR/FLTR, FXWG, XL (CONT) Zombie w/ spinning blades $95.95 FOR FXD (EXCEPT FXDWG, 07 FXDSE), FLHT/FLHR/FLHX/FLTR Spinning blades Zombie w/ spinning blades FOR FXST/FLST (EXCEPT FXSTD, FLSTS/C), FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKE, FXD, XL, V-ROD (EXCEPT VRSCR, VRSCF) Spinning blades Zombie w/ spinning blades BLACK ISO -GRIPS Styled to match the popular ISO -Pegs Dampen handlebar vibration while providing a sure grip Available in gloss black Readily accept the ISO -Throttle Boss PART #s or (sold separately); see the Drag Specialties 2011 FatBook For models (except FLHT/FLHR/FLTR/ FLHX and H-D FL Trikes) $ For FLHT/ FLHR/FLTR/FLHX and H-D FL Trikes MINI-BEAST I AIR HORN Self-contained twin trumpet air horn fits most H-D motorcycles with stock horn on side of bike Emits a loud 128 db Round aluminum cover Plug-n-play installation (one nut and three wires) Measures 6 3 /4 dia. X 3 1 /2 D, excluding mounting tab Chrome $ Black wrinkle, straight fins Black wrinkle, 7-spoke Black wrinkle, mesh center SADDLE SHIELDS Frame-mounted polycarbonate shields help beat engine heat Dissipate and re-direct engine heat away from the rider Make riding on those hot summer days bearable Replacement mounting kits available separately REFLECTIVE SMOKE For FSXT/FLST (except FXDWG) $ For FXD/FXDWG CLEAR For FLT/FLHT/FLHX/FLHR/FLTR REPL. MOUNTING KITS For PART # For PART #s ,

12 8MM OPEN-STYLE 2 BELT DRIVE SYSTEM WITH PRO CLUTCH 8mm kit comes with 2 belt, Pro Clutch, clutch pulleys, nut and washer All pulleys are hard-anodized for long life Front pulley is drilled and tapped to accept a puller for easy removal Rear pulley features hardened clutch dogs which are attached with two stainless steel rivets in special slots in the basket All bearing races are special chromemoly with a hardness rating of 60 on the Rockwell scale NOTE: All open-style belt drives require a belt guard for safe operation. 8MM OPEN-STYLE BELT DRIVES 8mm kits come with belt, clutch pulleys, nut and washer All pulleys are hard-anodized for long life Front pulley is drilled and tapped to accept a puller for easy removal Rear pulley features hardened clutch dogs which are attached with two stainless steel rivets in special slots in the basket All bearing races are special chromemoly with a hardness rating of 60 on the Rockwell scale NOTE: All open-style belt drives require a belt guard for safe operation. 2 BELT For Big Twin w/ tapered sprocket shaft (4-speed) $ For Big Twin w/ splined sprocket shaft (4-speed) MM SINGLE-BORE THROTTLE BODIES Designed for riders seeking the greatest possible performance gains from their fuel-injected engines By utilizing air column inertia and carefully timed gas dynamic pressure waves, the S&S VFI Tuned Induction systems ram additional air into the cylinders for increased mid-range torque For maximum tunability and performance gains an S&S Variable Fuel-Injection (VFI) module is recommended (sold separately), but any compatible, programmable module with enough capability and tuning range can be used For EFI Big Twin and aftermarket models (Delphi-style) $ For Big Twin w/ splined sprocket shaft $ BELT For Big Twin w/ tapered sprocket shaft (4-speed) $ For Big Twin and aftermarket models (Delphi-style) (except Touring models w/ electronic throttle control) $ GENERATOR GEAR COVERS Fit most generator motors; styled after the OEM types below Cast construction with a natural finish Include gasket and mounting hardware Panhead style; ribbed w/o tapped hole for top-end oiling, 1 /4 mount holes and 11 /16 i.d. pinion bushing $ Panhead style; smooth w/o outside oiler passage, 5 /16 mount holes, 9 /16 i.d. pinion bushing SPIGOT-MOUNT INTAKE MANIFOLDS FOR S&S HEADS Used to install 48mm CV or Mikuni carburetor on Twin Cam 88, 95 bore motors Will also fit S&S Hot Setup and Super Stock head kits 58MM SINGLE-BORE MANIFOLD 58mm single-bore manifold for 124 fuel-injected Big Twin with cylinder length and stock NOTE: Requires the use of S&S manifold O-rings and U-rings, or S&S heads sold separately (see 2011 Fatbook). PART # ENGINE SIZE SUG. RETAIL For 124 fuel-injected Big Twin w/ For Twin Cam 88 and 95 $99.95 cylinder length $ NOVEMBER