FIRESTORM EXHAUST TRUE-DUAL DOWN UNDER HEADPIPES JULY dragspecialties.com THE DRAG SPECIALTIES

Transcription

1 FIRESTORM EXHAUST Features 16-gauge steel construction throughout 13/4" headpipes with 21/2" muffler bodies Includes mounting bracket and hardware Heat shields and baffles included Available in chrome w/ rotatable slash cut billet end caps NOTE: O2 sensor plugs are included for pre-07 FXST/FLST applications For FXS/FXST/FLS/FLST (except 09 FXSTSSE) $ TRUE-DUAL DOWN UNDER HEADPIPES 13/4" headpipes with 21/4" heat shields Accept any style mufflers that fit to stock headpipes, including Bassani Dresser mufflers Mufflers sold separately Available in chrome or black finish FOR FLHT, FLHR, FLHX, FLTR MODELS Chrome $ Black EMISSIONS NOTICE: THE CALIFORNIA AIR RESOURCES BOARD (CARB) DOES NOT PERMIT THE USE OF EMISSION-RELATED PARTS OR PRODUCTS THAT REMOVE OR ALTER OEM EMISSION CONTROL DEVICES UNLESS ISSUED AN EXECUTIVE ORDER (EO) BY CARB, OTHER THAN FOR CLOSED COURSE COMPETITION USE ONLY. CHECK YOUR LOCAL LAWS AND MANUFACTURERS INFORMATION. dragspecialties.com

2 BIG RADIUS Big 21/2" full header and muffler heat shield system is virtually blue-proof Slash-cut design; black pipes feature heat shields coated with a race-quality black ceramic Removable baffles and mounting hardware included FOR 14 XL Chrome $ Black NESS-TECH BILLET SADDLEBAG LATCH COVERS Machined from 6061 T-6 billet aluminum Unique and clean style Latch covers replace the factory faceplates while retaining all functions of the stock latches Sold in pairs FOR 14 FLHT/FLHX/FLHR MODELS Slot Track, chrome $ Slot Track, black Deep Cut, chrome Deep Cut, black Beveled, chrome Beveled, black BILLET WINDSHIELD TRIM Windshield trim provides a clean transition between fairing and windshield Machined from billet aluminum Matches the popular line of Ness accessories FOR 14 FLHT/FLHTC/FLHTCU/FLHX AND H-D FL TRIKE MODELS Deep Cut, black $ Deep Cut, chrome Slot Track, black Slot Track, chrome Beveled, black Beveled, chrome EMISSIONS NOTICE: THE CALIFORNIA AIR RESOURCES BOARD (CARB) DOES NOT PERMIT THE USE OF EMISSION-RELATED PARTS OR PRODUCTS THAT REMOVE OR ALTER OEM EMISSION CONTROL DEVICES UNLESS ISSUED AN EXECUTIVE ORDER (EO) BY CARB, OTHER THAN FOR CLOSED COURSE COMPETITION USE ONLY. CHECK YOUR LOCAL LAWS AND MANUFACTURERS INFORMATION. 2

3 MEMPHIS SHADES With headquarters and manufacturing right here in the U.S.A., the leader in flawless gradient windshields, along with some of the most innovative fairings, continues to add to their selection to make sure every rider has a choice of Memphis Shades products. The latest 2014 additions you see here open up new possibilities for the owners of these popular new models. Through careful design and testing, these windshields provide the same style and comfort as the originals updated for your 2014 owners. SPOILER WINDSHIELDS Designed using CFD to work in concert with the splitstream vent, this Memphis Shades Spoiler windshield takes Rushmore comfort to the next level literally Made of Lucite for excellent optics and durability The 3" vertical section at the top is optically correct Available in three sizes: 4.5", 6.5" and 8.5" Available in two shades: smoke and ghost; ghost shade has a very light black tint with 85% light transmission, with the lower part dyed gradient black Memphis Shades 4.5" Spoiler Windshield Vent Open CFD image respresents 5'10" 68 MPH FOR 14 FLHT/FLHX AND 14 HD FL TRIKE MODELS 4.5" TALL Smoke $ Ghost Harley-Davidson 5" Stock Windshield Vent Closed CFD image respresents 5'10" 68 MPH 6.5" TALL Smoke $ Ghost Harley-Davidson 5" Stock Windshield Vent Open CFD image respresents 5'10" 68 MPH 8.5" TALL Smoke $ Ghost REPLACEMENT WINDSCREENS Low-profile windscreens create a smooth airflow Made of 5mm thick Acrycast material; scratch coat treated to resist marring Flip-up lip for additional wind protection Use OEM hardware Light smoke is about 90% transparent; dark smoke is about 60% transparent FOR 14 FLHX/FLHT AND H-D FL TRIKE MODELS " light smoke $ " dark smoke " light smoke " dark smoke $ " light smoke " dark smoke " light smoke $ " dark smoke " light smoke

4 LED DYNAMIC FAIRING/WINDSHIELD TRIM Easy-to-install, dual-function, stainless steel windshield trim can be installed in approximately 30 minutes or less Dynamic Windshield Trim features white DRL running lights and amber LED turn signals White DRL LEDs are automatically deactivated when the turn signals or hazard warning lights are activated, and automatically reactivated when the turn signals or hazard warning lights are deactivated LEDs function with 4-way hazards and alarms when bike is on or off Plug and play installation FLHT/FLHX/FLHTCUTG Polished $ Gloss black " SOLO LUGGAGE RACKS The perfect accessory for the solo rider; carry your gear without worrying about the paint job Strong 1/2" steel tube construction Rack follows contour of the fender and mounts with existing holes Measure approximately 11" 6" May require a rear seat nut if back mounting hole in fender has a plastic plug or is not threaded; use either PART #DS or OEM # (must be purchased separately) FOR FLS, FXS Matte black $ Chrome GROOVED HANDLEBAR RISERS Tall or short heights available with a chrome or gloss black finish For 1" diameter handlebars Sold in pairs SHORT (.69" TALL) Chrome $ Gloss black TALL (1.69" TALL) Chrome Gloss black DOGBONE HANDLEBAR RISERS Available with a chrome or gloss black finish Measure 1.5" tall with 1.5" offset For 1" diameter handlebars Sold in pairs Chrome $ Gloss black SOLID RISER BUSHING KITS Counterbore aluminum riser bushings fit 39mm narrow glide front ends and replace the stock rubber bushings and washers Ideal for riders who want solid-mounted handlebars or for use with tall handlebars for added rigidity and stability Feature a counterbore for Allen cap hardware on the underside, resulting in a flush mount, cleaning up the underside of the top triple tree Available in your choice of raw aluminum or black anodized finishes FOR MOST SOFTAIL. FXR AND DYNA AND XL MODELS (EXCEPT FXS, FXSTD AND FXDB) Raw aluminum finish $ Black anodized finish

5 " STAND-ALONE LCD GPS COMPASSES Designed to be used in place of the factory air temperature gauge It uses the factory gauge cup and plugs directly into the existing gauge wiring LCD readout displays compass heading, air temperature and elevation in eight LED backlit color choices Requires the use of GPS compass module PART # and air temperature sensor PART # (sold separately) Black/black $ Silver/chrome " STAND-ALONE LED GPS COMPASSES Can be used as a stand-alone piece, or as an add-on to a set of MCL digital gauges It uses the factory gauge cup and plugs directly into the existing wiring LED readout displays compass heading, air temperature, and elevation in either red or blue backlight options Available with either chrome or black bezel Requires the use of GPS compass module PART # and air temperature sensor PART # (sold separately) Chrome bezel w/ blue $ Chrome bezel w/ red Black bezel w/ blue Black bezel w/ red T & T ELECTRONIC TACHOMETERS Built with the best components and strongest stepper motor specifications on the market, this T&T tachometer is the perfect addition for all Harley-Davidson motorcycles Its large dial face and backlight make it easy to read all day long Available with black or chrome casing Measures 3" diameter (without bezel), 3.4" with bezel 1.75" deep (without bezel) Includes required mounting equipment Black casing/black face $ Chrome casing/white face SWINGARM UPGRADE KIT Specially designed to upgrade the handling and feel of FXR and Touring models Seven-piece kit converts old-style OEM cleve blocks to high-tech spherical bearings with CNC-machined prevision spaces and collars For FXR and Touring models $ GEAR INDICATOR Lightweight, compact, easy to use and to install, this meter quickly tells which gear you ve selected Its big digits and blue backlight makes it easy to read during day or night riding Made to fit most of the Harley-Davidson models Measures 1.45" wide 2" T.7" thick Includes mounting hardware and insructions For most Big Twin, XL and V-Rod models (except XL 1200 models) $

6 LOS ANGELES CHOPPERS We remind you that the Pros at LA Choppers have developed, designed and built award-winning customs for many years. Today these folks incorporate what they have learned building one-of-a-kind rides into producing functional and stylish products that riders everywhere are looking for. The new bars, lines and cables you see here are a prime example of their well-designed and thought-out products that will work perfectly the moment your customer installs them. GLOSS BLACK 11/4" SHORTY STYLE HANDLEBARS The baddest and original Outlaw Z-bar design Accept handlebar risers and clamps for 1" diameter standard handlebar Drilled for internal wiring NOTE: Not for use with stock risers and handlebar clamp/gauge mount on 883C/1200C models. PART # SUG. RETAIL DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK $ Shorty H 3" 33" 11" 5" 11/4" APE HANGERS Designed to have proper clearance on 2014 FLHT/FLHX models with the new style batwing fairing Notched for throttle-by-wire Large laser-cut, burr-free wiring slots CHROME PART # SUG. RETAIL Allow the use of factory heated grips and all stock controls 10" Ape Hangers work with stock length clutch and brake lines GLOSS BLACK PART # SUG. RETAIL DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK FOR 14 FLHT/FLHX AND H-D FL TRIKE $ $ " Ape Hanger 10" 37" 12" 10" " Ape Hanger 12" 37" 12" 10" " Ape Hanger 14" 37" 12" 10" " Ape Hanger 16" 37" 12" 10" " Ape Hanger 18" 37" 12" 10" " Ape Hanger 20" 37" 12" 10" STAINLESS STEEL CLUTCH LINE KITS Braided steel hydraulic clutch lines Available in stock and extended lengths BRAIDED STEEL CLUTCH CABLES Stainless steel braided or black vinyl-coated stainless steel clutch cables Available in stock and extended lengths FOR 14 FLHTCU, FLHTK, FLHX, FLHXS AND H-D FL TRIKE CLEAR-COATED STAINLESS STEEL Stock length $ For use w/ Beach Bars For use w/ Mini Ape Hangers For use w/ 12"-14" Ape Hangers For use w/ 15"-17" Ape Hangers For use w/ 18"-20" Ape Hangers BLACK VINYL-COATED STAINLESS STEEL Stock length For use w/ Beach Bars For use w/ Mini Ape Hangers For use w/ 12"-14" Ape Hangers For use w/ 15"-17" Ape Hangers For use w/ 18"-20" Ape Hangers FOR FLHT/FLHX/FLTR, FLHR BRAIDED STAINLESS STEEL Stock length $ For use w/ Beach Bars For use w/ Mini Ape Hangers For use w/ 12"-14" Ape Hangers For use w/ 15"-17" Ape Hangers For use w/ 18"-20" Ape Hangers BLACK VINYL-COATED STAINLESS STEEL Stock length For use w/ Beach Bars For use w/ Mini Ape Hangers For use w/ 12"-14" Ape Hangers For use w/ 15"-17" Ape Hangers For use w/ 18"-20" Ape Hangers

7 STAINLESS STEEL BRAKE LINE KITS Feature clear-coated or black vinyl-coated braided steel brake lines Chrome steel fittings STAINLESS STEEL KITS FOR 14 FLHT/FLHR/FLHX MODELS W/ ABS Stock length $ For use w/ Beach Bars For use w/ Mini Ape Hangers For use w/ 12"-14" Ape Hangers For use w/ 15"-17" Ape Hangers For use w/ 18"-20" Ape Hangers FOR FLHT/FLHR/FLHX (W/ ABS) Stock length For use w/ Beach Bars For use w/ Mini Ape Hangers For use w/ 12"-14" Ape Hangers For use w/ 15"-17" Ape Hangers For use w/ 18"-20" Ape Hangers FOR FLHT/FLHR/FLTR/FLHX (W/O ABS) Stock length For use w/ Beach Bars For use w/ Mini Ape Hangers For use w/ 12"-14" Ape Hangers For use w/ 15"-17" Ape Hangers For use w/ 18"-20" Ape Hangers FOR FLTR (W/ ABS) Stock length For use w/ Beach Bars For use w/ Mini Ape Hangers For use w/ 12"-14" Ape Hangers For use w/ 15"-17" Ape Hangers For use w/ 18"-20" Ape Hangers BLACK VINYL-COATED STAINLESS STEEL KITS FOR 14 FLHT/FLHR/FLHX MODELS W/ ABS Stock length $ For use w/ Beach Bars For use w/ Mini Ape Hangers For use w/ 12"-14" Ape Hangers For use w/ 15"-17" Ape Hangers For use w/ 18"-20" Ape Hangers FOR FLHT/FLHR/FLHX (W/ ABS) Stock length For use w/ Beach Bars For use w/ Mini Ape Hangers For use w/ 12"-14" Ape Hangers For use w/ 15"-17" Ape Hangers For use w/ 18"-20" Ape Hangers FOR FLHT/FLHR/FLTR/FLHX (W/O ABS) Stock length For use w/ Beach Bars For use w/ Mini Ape Hangers For use w/ 12"-14" Ape Hangers For use w/ 15"-17" Ape Hangers For use w/ 18"-20" Ape Hangers FOR FLTR (W/ ABS) Stock length For use w/ Beach Bars For use w/ Mini Ape Hangers For use w/ 12"-14" Ape Hangers For use w/ 15"-17" Ape Hangers For use w/ 18"-20" Ape Hangers DP BRAKES SINTERED METAL BRAKE PADS Give your bike peak braking performance with DP Brakes brake pads Pads have a quick break-in period, so you get peak braking performance fast DP Brakes design and materials ensure consistent, hard stops and fade-free performance Pads give long pad life sintered metal compounds outlast conventional organic or Kevlar pads Made with DP Brakes proven sintered metal pad material Gray-colored aluminum oxide-based ceramic material on backplate of pad keeps heat away from caliper piston and fluid in extreme conditions for fade-free performance FRONT BRAKE PADS DP SINTERED SUG. DESCRIPTION PART # RETAIL /750 Street $ REAR BRAKE PADS DP Sintered Excellent initial bite and feel in both wet and dry conditions GG friction rated Quiet and non-abusive to most rotors; no brake dust or brake fade NOTE: DP Brakes brake pads are not for use with polished rotors. DP SINTERED SUG. DESCRIPTION PART # RETAIL /750 Street $ REAR CALIPER MOUNTING BOLT KIT Socket-head kit replaces OEM caliper mounting bolts and washers Available with polished finish PART # DESCRIPTION For Touring and V-Rod models SUG. RETAIL $

8 JOKER MACHINE The folks at Joker Machine continue to design and manufacture exciting new products, ranging from the highly functional to the radically custom. With years of experience in a variety of two-wheel endeavors, they bring to the marketplace a fresh way of thinking when it comes to the American V-Twin. You will want to get hands-on with this broad product line to provide your customers with the best custom choices not available anywhere else CLIP-ON HANDLEBARS A great way to give your bike that custom Cafe Racer look while providing a surprisingly comfortable riding position due to their zero handlebar drop angle configuration Super-clean design features all-cnc-machined billet aluminum clamps and handlebars and includes superstrong alloy mounting hardware Bars are 1" diameter, 12" long aluminum, constructed from strong, 1 8" thickwall, 6061 T-6 tubing Now available with hard black anodized clamps and bars For models w/ 39mm fork tubes $ For models w/ 41mm fork tubes CLUTCH AND BRAKE LEVERS CNC-machined from billet aluminum with a chrome-plated or hard black anodized finish Fully rounded along the finger grooves for comfort For models with OEM-style controls Sold each FOR XL MODELS Brake lever, chrome $ Brake lever, black anodized Clutch lever, chrome Clutch lever, black anodized ADJUSTABLE SERRATED BILLET FOOTPEGS Give your bike a unique design twist with these all-billet aluminum serrated footpegs Fully CNC-machined from solid 6061 T-6 bar Superstrong, yet lightweight two-piece construction The comfortable serrated foot surface area provides a good bite onto the bottom of your shoe Footpegs available in original or heel style with Joker s exclusive pitch adjustment screw that enables you to adjust the pegs to a level riding position (if necessary) so the pegs don t appear to lay down with time, vibration, etc. Feature full 360 footpeg rotation, making them perfect for any application FOR XL1200V/XL1200X/XL1200C MODELS Available in your choice of natural raw alumimum or our hard black anodized finish Male-mount footpegs are available in two different lengths Sold in pairs ADJUSTABLE LONG FOOTPEGS; 41/2" LONG 21/2" WIDE 1" THICK Black anodized $ Raw aluminum ADJUSTABLE SHORT FOOTPEGS; " LONG 21/2" WIDE 1" THICK Black anodized Raw aluminum BILLET CHOKE CABLE KNOBS A quick and easy replacement for the stock plastic choke knob Now available in a knurled design Attaches with included setscrew FOR ALL MODELS W/ KEIHIN CV CARBURETOR AND MIKUNI HSR 42/45 CARBURETORS Black anodized $ Chrome

9 KNURLED GAS CAPS A great replacement for your hard-to-remove stock gas cap Knurled design for a much easier removal over the stock smooth-sided gas cap Super-clean and low-profile design features all CNC-machined billet aluminum construction throughout After being tightened down, serrated caps can rotate to any position to align design pattern Hard black anodized, chrome-plated or raw aluminum finish High-quality gas cap base has right-hand threads and is vented Dimensions: 3" diameter, 1/4" thick at the edge, and 1/2" thick in the center FOR L96-14 H-D MODELS Chrome plated $ Black anodized Raw aluminum " GLOSS BLACK HANDLEBARS Steel tubing with a gloss black finish.090" wall thickness for maximum strength Available with dimples in a smooth, unknurled style, unless noted PART # SUG. RETAIL DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK $ Flat track 4.5" 30.5" 7.5" 11.25" " T-Bar 4" 31" 8.5" 10.5" " T-Bar 4" 31" 8.5" 10.5" " T-Bar 5" 31" 8.5" 11.5" " T-Bar 5" 31" 8.5" 11.5" " T-Bar 6" 31" 8.5" 12.5" " T-Bar 6" 31" 8.5" 12.5" 1 Dimpled and drilled for internal wiring FENDER-TO-FORK ADAPTERS FOR 21" WHEELS Aluminum adapters allow custom front fender installation Designed to raise the stock fender to work with a 21" front wheel on 2014 models 11 32" diameter, 31/4" on-center blind holes; 1" thick 5 16" diameter, 31/4" on-center fork leg mount holes SUG. PART # DESCRIPTION RETAIL FOR 14 FLHT/FLHX/FLHR AND H-D FL TRIKE Chrome $ Gloss black FENDER-TO-FORK ADAPTERS Allow you to mount an FLSTF front fender to 14 FLHT forks when using a 19" wheel Work with FLSTF fender PART # Can also be used in many custom applications Adapters measure 4 1 8" L 2 1 8" W; 1" thickness Top holes are 5 16" with 23/4" centers; bottom holes are also 5 16" with 31/4" centers Sold in pairs FOR 14 FLHT AND H-D FL TRIKE Chrome $ Gloss black SATIN BLACK CAM COVERS Die-cast aluminum construction Bushings installed, pinned and reamed to OEM specifications Include oil seal, mounting hardware and gasket For Big Twin (except 99 Twin Cam) $ For Big Twin

10 HOGTUNES The folks at Hogtunes continue to be heard loud-and-clear with their expanding line of high-performance audio products and accessories. With in-house state-of-the-art sound labs, they are able to continually develop, test and refine products designed specifically as Audio Solutions For The Great American Cruiser. Turn your riders on to some Tunes today! AMP/FRONT AND REAR SPEAKER KIT Includes Gen3 front and rear speakers and 200-watt, 4-channel amplifier Upgraded 100% plug-n-play wire harness Includes custom mounting arms to secure amp above radio Comes with everything required to complete installation Sold each NOTE: Not compatible with CVO models with factory amplifiers installed For FLHTK/FLHTCU/I models $ GENERATION 3 5" 7" FRONT SPEAKERS Feature vented magnets for increased power handling New metal mesh speaker grilles Two ohm, conservatively rated at 100 watts RMS power handling Sold in pairs NOTE: Not compatible with CVO models with factory amplifiers installed For FLTR/X or FLTR w/ Hogtunes amp $ AMP/FRONT SPEAKER KITS Include front speakers and 200-watt, 2-channel amplifier Kit comes with everything required to complete installation 100% plug-n-play harness included Sold each NOTE: Not compatible with CVO models with factory amplifiers installed For FLHT/FLHX models $ For FLTR/X models

11 200 WATT AMPLIFIER KIT 200-watt, 2-channel amplifier (100W 2) Includes upgraded, 100% plug-n-play harness Complete with everything needed for installation NOTE: Not compatible with CVO models with factory amplifiers installed. NOTE: PART # required to mount amp in FLTR models. PART # required if this is the second Hogtunes amp on FLHT/FLHX models. 200 WATT AMPLIFIER KIT 200-watt, 4-channel amplifier (50W 4) Includes upgraded, 100% plug-n-play wire harness Custom mounting arms to secure amp above radio are also included Comes complete with everything needed for installation Sold each NOTE: Not compatible with CVO models with factory amplifiers installed For FLHT/FLHX/H-D FL Trike models $ For FLHT/FLHX/FLTR/ H-D FL Trike with factory radio $ PASSIVE FLEXPOWER HIDE-AWAY AM/FM/WB ANTENNAS Designed specifically for 14 Ultra/StreetGlide/Trike models with the factory Harley radio All three reception bands of AM, FM and WB, to help you altogether eliminate the rear-mounted antenna on your Harley Installation is a snap, as there are no wires to cut or splice, and antenna wire lead is secured in the fairing with included double-sided tape clips Include complete and detailed installation instructions For 14 FLHT/FLHX and H-D FL Trike models $ STREET METAL AIR INTAKE SYSTEMS Developed around an over-sized K&N high-flow air filter that is designed to boost performance, filtration and service intervals Aluminum backing plate with an integrated breather system and velocity stack provides a solid mounting surface High-quality mirror finish aluminum cover MANUFACTURER S NOTE: Not legal for street use on pollution-controlled vehicles. FOR FLHR/FLHT/FLHX/FLTR AND H-D FL TRIKE Grind $ Flux Weld Torch

12 COBRA With a wide variety of products that includes custom accessories for style and comfort on one end of the spectrum, all the way up to high-performance add-ons including exhaust, intake and fuel management on the front end, you can find a Cobra solution for just about every rider. With their latest additions you see here, there are even more opportunities to put Cobra on your customers bikes Fi2000 POWRPRO WITH CVT TECHNOLOGY Continuously Variable Tuning (CVT) is the key to the remarkable performance the Fi2000 PowrPro delivers PowrPro uses electronic control technology that calculates the bike s rate of acceleration by reading crankshaft rotation at the flywheel and changes in load, just as a dynamometer measures acceleration at the rear wheel PowrPro measures and adjusts fuel flow during acceleration to the injectors in microseconds for super-fast fuel tuning continuously and automatically; net result: precise EFI tuning now happens in the real world in real time, nonstop, up to 80 times per second New patented technology unlike any other system on the market PowrPro tunes to precise air-fuel mixture to create maximum power 80 times per second (does not tune to a predetermined arbitrary AFR) Creates that adjustment to maximum power on every squirt of the injector It s like having the best custom map writing, dyno operator tuning your fuel every time you crank the throttle Tunes every gear, every roll on, every environmental change, every engine mod, lugging the engine, winding it out to redline: it reacts, verifies and adjusts when the bike is accelerating Provides perfect acceleration fuel settings in any condition, with any exhaust system with any engine modifications No matter what kind of new hardware you install on your bike a new exhaust system, a freer-flowing air filter setup or even a big-bore hop-up kit with highperformance cams PowrPro continues to analyze and tune your engine for peak performance No dyno, external adjustments or additional components needed Does not require wide band oxygen sensors MANUFACTURER S NOTE: Not legal for operation on public highways in the state of California For 14 FLHT, FLHR, FLHX $ For 14 XL Fi2000R O2 STANDARD MODEL FUEL PROCESSORS The Fi2000R O 2 digital fuel processor is designed to work with all H-D exhaust systems (stock or aftermarket) equipped with oxygen sensors in place (closed-loop design) Works much like a carburetor jet kit with adjustments similar to the air-mixture screw, the needle and clip positions and the main jet The Fi2000R increases horsepower and torque by optimizing stock lean air/fuel mixtures (helps cool the engine temps as well) Quick and simple installation with plug-and-ride technology with OEM-style connectors No confusing computer downloads to install No expensive dyno-testing required Pre-configured from the factory for your make and model, but easy to adjust should your specific application need it Improves overall rideability MANUFACTURER S NOTE: Not legal for operation on public highways in the state of California For 14 FLHT, FLHR, FLHX $ For 14 XL