Instruments & Gauges

Transcription

1 Instruments & Gauges Proudly Distributed By

2 U.S. Patent #4,848,154 SpeedoTach 2 for Fat Bob Dashes Our new and improved combination speedometer and tachometer for all large Fat Bob dashes from The precision built 120MPH speedometer is combined with a solid state 6000RPM electronic tachometer that accurately tracks engine speed by reading the coil output. Both instruments are designed to withstand vibration and maintain accuracy throughout all speed ranges, and now the wiring attaches to threaded posts on the back of the gauge. Standard features include a glass lens, new graphics, a wiring harness and complete mounting kit (CC #25965) :1 ratio for FL models with transmission speedometer drives from 47-67, and Sportster, FX and FXR models with front wheel speedometer drives from (except Softail and 4-speed FXWG models). Requires a speedometer cable with a 5/8"-18 threaded nut $ Custom Front Wheel Speedometer Cables Unique black vinyl cables that permit you to combine a CC #27981 speedometer/tachometer with front wheel drive units. Cables have a 5/8"-18 large coarse thread on the speedometer end /2"-long $ Black vinyl, 42 1/2"-long $20.99 Note: CC #27981 speedometers may be installed on models from if the self-cancelling turn signal feature is forfeited. Mirage Speedometer Visors Chrome-plated visor features die-cast zinc construction and styling to match other Custom Chrome Mirage accessories. Installs quickly and easily with the included clear silicone adhesive Fits large Fat Bob Original Equipment electronic speedometers as used on Softail models from 96-13, Road King models from and Dyna Wide Glide models from (sold each) $ Speedometer/Tachometer Combination instruments feature an easy to read 120 MPH speedo face with a solid state electronic tachometer. Tachometer reads RPM from 12 volt coil output. Single fire ignitions will require tach adapter. Sold under license :60 ratio. Fits FL models 81-84, FXWG and Softail models 84-95* with front wheel drive unit. 12mm cable fitting $ Dash and Speedometer Kits with Dashplates Complete kits with a speedometer, dash, trim, dashplate with light sockets, and ignition switch for Softail and 4-speed FL and FX models from Offered in 1:1 and 2:1 ratios for use with front wheel or transmission speedo drives. Note: These kits may be installed on models if the self-cancelling turn signal feature is forfeited light dash with 1:1 ratio speedometer $ light dash with 2:1 ratio speedometer $ INSTR.02 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. Please see Cautionary Information in back of catalog.

3 Late 1989Up Mounting Hardware Included Motor Factory Speedometers Premium speedometers feature a quality glass lens, resettable trip mileage indicator, speedometer mounting kit (CC #25965), and a rubber speedometer dampener (CC #25959). They are available in 1:1, 2:1 and 2240:60 ratios to fit most models with Fat Bob dashes. The wide selection of speedometer faces represents most styles Combined with the ability to specify drive ratio, you can detail your speedometer to suit the look of your bike. 2:1 Ratio Speedometers Fits FL models with transmission speedometer drives from 47-67, and Sportster, FX and FXR models with front wheel speedometer drives from (except Softail and 4-speed FXWG models). Requires a speedometer cable with a 5/8"-18 threaded nut face $ face $ face $ face $ face (repl. OEM T) $ face (repl. OEM T) $ L89-95 face (120 mph) $ L89-95 face (180 km/h) $64.99 Note: Installation on 73 and later Sportster, FX and FXR models will require the additional purchase of one of the custom speedometer cables listed elsewhere on this page. May be installed on models from with front wheel speedometer drives if the self-canceling turn signal feature is forfeited. 1:1 Ratio Speedometers Fits 4-speed FL and FX models with transmission-driven speedometers from Requires a speedometer cable with a 5/8"-18 threaded nut face $ face $ face $ face $ face (repl. OEM T) $ face (repl. OEM TB) $ :60 Ratio Speedometers Fits all Softail and 4-speed FXWG models from 84-90, and 4-speed FL models with front wheel speedometer drives from Requires a speedometer cable with a 12mm threaded nut face $ face $ face $ face $ face $ L89-95 face (120 mph) requires CCI #25974 reset knob.. $64.99 Note: May be installed on models from if the self-canceling turn signal feature is forfeited and a pre-91 dash cover is installed to accommodate the odometer reset knob. 2240:60 Ratio with Reed Switch Fits all Softail models from with front wheel speedometer drives and self-canceling turn signals. Requires a speedometer cable with a 12mm threaded nut L89-95 face (120 mph) replaces OEM A $99.99 Note: This speedometer may only be installed in conjunction with the cast dash or Custom Chrome equivalent to accommodate the odometer reset knob. Speedometer Mounting Kit and Rubber Speedometer Dampener Fit all models with cast dashes from Kit includes rubber dash gasket, two mounting pins with clips, and two grommets Complete kit (repl. OEM ) pack of ten $ Rubber dampener for Fat Bob speedometers when used with a cast dash on Big Twins from (repl. OEM ) $5.99 Speedometer Light Sockets Includes 12-volt bulbs. Pack of Replaces OEM $4.80 Custom Front Wheel Speedometer Cables Unique black vinyl cables that permit you to combine our 2:1 ratio speedometers with front wheel speedometer drive units. Cables have a 5/8"-18 large coarse thread on the speedometer end /2"-long $ Black vinyl, 42 1/2"-long $ INSTR.03

4 Actual speedo reads 120 MPH Police Special Speedometers These quality units are available in 1:1 and 2:1 drive ratios. Speedometers come with rubber isolation kit and Late-Style threaded reset knob stud. When used with early steel dashes, antique reset knob is required. Reset knobs sold separately. 1:1 Ratio Speedometers (1000rpm = 60mph) Fits FL models 62-80, FX models and FXWG with transmission drive unit. 5/8"-18 cable fitting Police special face $ :1 Ratio Speedometers (2000rpm = 60mph) Fits FL models with transmission drive unit and FX, or custom models with front wheel drive unit. 5/8"-18 cable fitting Police special face $59.99 KM/H Face Fat Bob Speedometers These units feature quality glass lenses and resettable odometers. They fit most Fat Bob dashes, and require speedometer cables with a 5/8"-18 thread. Face 1:1 ratio Price 2:1 ratio Price $ $64.99 KM/H $ $64.99 KM/H KM/H Face SpeedoTachs The same features as the speedometers listed above with the addition of an integrated electronic tachometer. Includes installation instructions :1 ratio $ K ILOMETERS INSTR.04 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. Please see Cautionary Information in back of catalog.

5 Style Speedometer and Tachometer Original equipment style replacement instruments for Big Twin and Sportster models from The speedometers feature 10 to 120 MPH faces and come complete with dual light bulbs and sockets. Available for handlebar or tank-mounted applications. Speedometers Fits FX, FXR and Sportster models with riser mounted gauges, rear reset knob and self canceling turn signals (repl. OEM A) $ Fits FX, FXR and Sportster models with riser mounted gauges and rear reset knob (repl. OEM A)......$69.99 Tachometers Fits FX, FXR and Sportster models with riser mounted gauges (repl. OEMs and ) $69.99 Tachometer and Speedometer Quality instruments for FX models with handlebar-mounted instruments from 73-82, and FX models with tank-mounted instruments from (except FXWG, FXST). The 120 MPH speedometer has a light socket, dash gasket and a mounting bracket. The tachometer includes a dash gasket and a mounting bracket. The speedometer requires a cable with a 16mm threaded nut Electronic tachometer (repl. OEM A) $ Speedometer (repl. OEM B) $ Actual speedo reads 150 MPH Early Model Speedometer Fits 4-speed FX models from (except Softail and FXWG models) and 73 Sportster models Replaces OEM $35.99 Note: FX models will require rewiring from stock stator drive system to new coil drive system. Speedometer for XL and FXR Models Original style replacement speedo for XL and FXR models Speedometer. Fits XL models and FXR models 82-E83 Replaces OEM D $ /2" Mini Instrument Kits Designed around our popular 2 1/2" diameter mini gauges, these kits include instrument, chrome mounting bracket (without visor), chrome gauge cup, rubber grommet and hardware. Fit most Big Twin and Sportster models from Instrument Kits Speedometer, 2:1 MPH.... $ Speedometer, 2240:60 MPH $ Speedometer, 2:1 KPH..... $ Tachometer, coil driven.... $78.99 Replacement Parts Single instrument bracket. $ Chrome cup, electric drive.. $ INSTR.05

6 Electronic and Mechanical Tachometers are available! Mini Gauges These gauges feature chrome cases with polished stainless steel bezels, strong chrome steel mounts, rubber mount handlebar clamps, accurate non-fluctuating indicators and 12-volt dial lights. They measure 2 5/8"-wide x 2 1/16"-deep. Durable housings are water and vibration resistant. The speedometers require cables with 12mm threaded nuts. Speedometers ONLY The 1:1 ratio units fit 4-speed FL and FX models with transmission driven speedometers from The 2:1 ratio units fit Sportster and K models, and FL models with transmission speedometer drives from They also fit Sportster, FX and FXR models with front wheel speedometer drives from (except Softail and 4-speed FXWG models). The 2240:60 ratio unit will fit Softail and 4-speed FXWG models from 84 thru 90, and 4-speed FL models with front wheel speedometer drives from 81 thru 84. It may also be installed on Softail models from 91 thru 95 if the self-cancelling turn signal feature is forfeited :60 ratio with MPH face $ :1 ratio with 140 MPH face $ :1 ratio with 160 MPH face $ :1 ratio with 180 KM/H face $35.99 Speedometer Kits with Cables These kits feature the same high-quality speedometers listed above, and include a speedometer cable to facilitate installation :60 ratio with MPH face for Softail and 4-speed FXWG models from 84-90, and 4-speed FL models with front wheel speedometer drives from May also be installed on Softail models from if the self-cancelling turn signal feature is forfeited $ :1 ratio with MPH face for Sportster and K models from 54-72, and FL models with transmission speedometer drives from $ :1 ratio for Sportster, FX and FXR models with front wheel speedometer drives from $ :1 ratio for 4-speed FL and FX models with transmission-driven speedometers from $49.99 Speedometers with Resettable Odometers The 2:1 ratio units fit Sportster and K models, and FL models with transmission speedometer drives from They also fit Sportster, FX and FXR models with front wheel speedometer drives from (except Softail and 4-speed FXWG models). The 2240:60 ratio unit will fit Softail and 4-speed FXWG models from 84-90, and 4-speed FL models with front wheel speedometer drives from It may also be installed on Softail models from if the selfcancelling turn signal feature is forfeited :60 ratio with 160 MPH face $ :1 ratio with 140 MPH face $ Black housing 2:1 ratio with 140 MPH white face $ :1 ratio with 180 KM/H face $39.99 Tachometers ONLY :1 ratio for all models with mechanical tachometers.... $ Electronic tachometer for most models from $ Black housing white face electronic tachometer for most models from $62.99 Tachometer Kit with Cable This kit features the same high-quality tachometer listed above, and includes a tachometer cable to facilitate installation :1 ratio for all models with mechanical tachometers.... $42.99 Replacement Parts Handlebar gauge clamp $ volt bulb (twist type) box of $ volt bulb (push-in type) box of $ Black vinyl speedometer cable for CC #27862 (53"-long). $ Black vinyl speedometer cable for CC # s and (38 1/2"-long) $ Black vinyl speedometer cable for CC # (38 1/2"-long) $ Braided steel speedometer cable for CC # (38 1/2"-long) $18.99 INSTR.06 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. Please see Cautionary Information in back of catalog.

7 Chrome Speedo Block-Off Plug Chrome plug is used to seal the transmission when the speedo drive unit is removed. Fits 4-speed Big Twins Includes chrome plate, gasket and screw. Sold each Block-off plug $5.99 Indicator Lamps These indicator lamps fit most models and are available in four different colors. They re shipped with 6"-long leads that are not terminated but include Original Equipment-style terminals. Also for most handlebar gauge mounting brackets. Sold each Green (replaces OEM ) $ Red (replaces OEM ) $ Amber (replaces OEM ) $ Blue (replaces OEM ) $ Replacement speed nuts to fit lamps (pack of 10) $0.50 Speedometer Sensor Block-Off Plugs for Big Twins Billet aluminum plug seals the transmission case when using a mechanical drive speedometer. Includes O-ring. Sold each Chrome-plated with chrome buttonhead bolt $ Light Bulb Sockets for Fat Bob Speedometers Replacement bulb sockets with two wires for large FL speedos. Sold each Metal lamp socket $ Plastic lamp socket $3.99 Speedometer Knobs and Screws Chrome knurled knob and screw sets for large dash-mounted Fat Bob speedometers. Sold in packs of Fits all Softail models (replaces OEM )......$ Fits all 4-speed Big Twins and Softail models from (replaces OEMs , ) $2.50 Antique Speedometer Knobs Reproduction of the thin stem odometer reset knob for Big Twin speedometers. Ideal for steel two-light, three-light or Cateye dashes. Pack of Antique speedometer knobs $1.20 Speedometer Reset Knob This chrome reset knob features knurled edges for easy adjustment and comes with mounting screw. Fits Softail models from Sold each Speedometer reset knob $ INSTR.07

8 .375".600" " " Motor Factory Speedometer Drive Units Stock replacement drive units for all models with front wheel drive speedometers from They work great with our 2-to-1 ratio speedometers Fits Sportster, FX and FXR models with Narrow Glide 19" front wheels, right side drive, 7 mm (repl. OEM ) $ Fits FLT and FLHT models, and speed FL models, right, 0 mm (repl. OEM ) $ Fits FXST, FXSTC, Dyna Wide Glide and 4-speed FXWG models with 21" front wheels from 84-95, left 16 mm (repl. OEM B) $ Fits Sportster, FX, FXR and Dyna Glide models with Narrow Glide 19" front wheels from 84-94, left, 8 mm (repl. OEM A) $ Fits FLHT models from (repl. OEM ), left, 11 mm $ Fits FLHS and FLHT models from 87-95, and FLT models from (repl. OEM A), left, 11 mm $ Fits FXLR models from (repl. OEM A), left, 8 mm $ Fits FL Softail models from (repl. OEM A) $ Fits FX Springer models from (repl. OEM ), left, 12 mm.... $29.99 (Mounting measurements are approximately!) Front Wheel Speedometer Drive Units Choose from our standard Spare Parts line or our Pro-Stock series of speedo drives. Pro-Stock Fits FXLR models from (repl. OEM A), left, 8 mm $29.99 Spare Parts Fits FX, FXR, and XL models with 19" front wheel (except FXWG) :1 ratio. Replaces OEM $ Fits FL models 81-84, FLT and FLHT models " wheel. 2.75:1 ratio. Replaces OEM $ Fits FXWG, FXST, and FXSTC models with 21" wheel. 2.0:1 ratio. Replaces OEM B $ Fits FX, FXR, and XL models with 19" front wheel :1 ratio. Replaces OEM A $28.99 M Custom Front Wheel Speedometer Drive Kits Puts the speedometer drive on the front wheel instead of the transmission. Kits are for use with 16" or 21" front wheels and 2240:60 ratio speedometers on 4-speed FXWG and FL models from (or custom bikes built with these front end components). The complete kits include correct spacers, drive ring and speedometer drive unit. Complete Kits For 16" front wheels $ For 21" front wheels $75.99 INSTR.08 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. Chrome Speedo Drive Covers The perfect finishing touch for a chrome front end. Designed to clear the Original Equipment black rubber cable boot Fits 4-speed FXWG, Dyna Wide Glide and Softail models from as well as all FLT, FLHT and FLHS models from $14.99 Please see Cautionary Information in back of catalog.

9 Front Wheel Drive Speedometer Cables Works on Big Twin and Sportster models with front wheel speedometer drive unit with metal cased handlebar or dash mount twin gauge speedometers (Type C ). Stock Length: 39" Fits: FX models 73-E78, FXR, FXLR 86-94, 85 FXSB, and 73 XL models. Replaces OEMs and A Stock Length: 43" Fits: XLS late 84-85, 85 FXRT, FXRS-SP and FXRS-CON Replaces OEM A See Chart 16-1mm Nut Spring or Metal Cable Style 39" Price 43" Price Steel braided $ $18.99 Front Wheel Drive Speedometer Cables Works on Big Twin and Sportster models with front wheel speedometer drive unit and Late-Style large diameter dash mounted speedometers (Type A ), aftermarket mini speedometers (Type D ), or plastic handlebar mounted speedometers (Type E ). Stock Length: 39" Fits: XL models 74-83, FXWG 84-86, FXST models 84-94, FXRS 88-94, Dyna Glide models 91-94, FLT models 80-85, 86 FLTC, FLHT and FLHTC 87-94, and 95 FLHT/C/U/I. Replaces OEMs , A, , , A and A Stock Length: 33 1/2" Fits: FL models 81-84, FLTC, FLHS 87-94, 95 FLTC-U and 96 FLTCU-I. Replaces OEMs and B Stock Length: 39 1/2" Fits: XLS and FXR, FXRS 82-E83. Replaces OEM B See Chart 12-1mm Nut Spring or Metal Cable Style 33 1/2" Price 37 1/2" Price 39" Price 39 1/2" Price 43" Price 45" Price Standard Black $ $ $ $ $ $8.99 Steel Braided $18.99 n/a $18.99 n/a $ $18.99 Custom Front Wheel Speedometer Cables Unique black vinyl cables that permit you to combine our 2:1 ratio speedometers with front wheel speedometer drive units. Cables have a 5/8"-18 large coarse thread on the speedometer end /2"-long $ Black vinyl, 42 1/2"-long $ Transmission Speedometer Drive Units teeth for FL models from 36-E61 (repl. OEM ) $ teeth for FL models from (repl. OEM ) 2: $ teeth for FL models from 69-80, FX models from and FXWGs from (repl. OEM T) 1:1.... $ Speedo drive for WL models :1 (repl. OEM ) $ Gasket (pack of 10) $ INSTR.09

10 Speedometer and Tachometer Cables Front Wheel Speedometer Cables Fits all FX (except FXWG, FXST); FXRS (except Sport Edition, Convertible, FXRT and Low Rider models with tank-mounted instruments); XLH and XLCH 73 only; XLX and XLH Also fits Sportster models from (replaces OEMs , A) 40 1/4".5/8 +16mm Black vinyl $ Steel braided $18.99 Fits XLS; FXRT and FXRS Sport Edition or Convertible models; FX (except FXWG, FXST) with 2" to 4" over stock length forks (replaces OEM ) 46" Black vinyl $16.99 Fits all front wheel driven CC mini-speedos and mini-speedo kits. Also fits XLH and XLCH and FXWG, FXST and FXSTC (replaces OEMs , and ) 38 1/2" Black vinyl $12.99 Fits FXR and XLS plus any of the applications for CC #19084 with 2" to 4" over stock length forks, including CC mini gauges (replaces OEM A) 40".12mm Black vinyl $14.99 Fits same applications, including CC mini gauges, as CC #19084 but for use on bikes with 6" to 8" over stock length forks 47 1/2" Black vinyl $14.99 Fits FL model (repl. OEM ) 36" Black vinyl $20.99 Fits XLX/XLCH 70-72, (repl. OEM ) 44" Black vinyl $17.99 Front Wheel Speedo Cables (continued) Fits FLHT/FLHTC/FLHTP 86 (repl. OEM A) 44 1/2" Black vinyl $15.99 Fits XLH883/883DLX/883 Hugger 91-94, XLH , XLS late 84-85, FXRS Conv , FXRS-SP 87-93, FXRT 85 (repl. OEMs , ) 41" Black vinyl $26.99 FXEF 1985 (repl. OEMs , ) 36".5/8 +16mm Black vinyl $14.99 Fits FL models 81-84, FLHS FLST 86-90, FLSTC 87-95, FLSTF 90-95, FLSTN 93-95, FLTC 87-91, FLTCU FLTCUI 96, FXDB-D 92, FXDB-S 91, FXDC 92, FXDL 93-94, FXRS (repl. OEMs A, , A/B and ) 35".12mm Black vinyl $11.99 Fits all models with 2:1 ratio speedometer and front wheel drive, FXWG/FXST (repl. OEM ) 42 1/2" Black vinyl, 42 1/2"-long $20.99 Transmission Drive Speedometer Cables Fits all transmission-driven CC mini speedometers and mini-speedo kits 53" $ Fits FLS, XL models with mini gauge, transmission drive, 47 1/2"....$ Fits all FL models, FX models and FXWGs, as well as XL models when using CC #25575 one-piece Fat Bob tank. Can be used with any of CC s large dashmounted 1:1 speedometers (repl. OEM ) 35 1/8" $15.99 Tachometer Cables Fits all XL and FL with distributor drive. Also fits CC #27820 & mini tachometers and mini-tach kits (replaces OEMs T, A) 32" Black vinyl $14.99 Custom Black Vinyl Front Wheel Speedometer Cables Unique cables that permit you to combine any of our large 2:1 ratio Fat Bob speedometers with front wheel speedometer drive units. Each cable is complete with two cable-tospeedo head nuts, and a specially-designed flared cable end to fit either the FL (5/8"-18 large coarse thread) or (16 x 1.0mm) metal cased speedometers fitted to Sportster, FX and FXR models /2"-long $ Black vinyl, 42 1/2"-long $20.99 Choke Cables Replacement black vinyl choke cables Fits XL 88-91, FLST/FXST 90-97, FLHT 90-97, FXRS/T 90-92, FXDL/FXDWG 93-97, FLHR 94-97, FLHT 95-97, FX (repl. OEMs , A, ) $ Fits FLTC 80-89, FLHT 83-87, FXRS 82-89, FLHTC 83-89, FLHTCU 89, FLHS 87-89, FXRP 84-88, FLHTP 84-88, FLT 80-83, FXRC 85/87, FXRD 86, FXRDG 84, FXLR 87-89, FXR 82-83/86-89, FXRS-SP 85-89, FXRT (repl. OEMs , )....$18.99 INSTR.10 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. Please see Cautionary Information in back of catalog.

11 Liquid Filled Gauges Wide selection of liquid filled gauges have a polished stainless steel bezel, chrome case, and a glass lens in either 60-lb. or 100-lb. faces and a 270 sweep. Faces match our style speedometers for FLs, and come complete with fittings. 60 Pound Gauges For Big Twins from $ For Big Twins from (Original Equipment exhaust system with crossover tube may interfere) $ Replacement fittings for CC #18206 (pack of 5) $ Pound Gauges For Big Twins from $ For Big Twins from (Original Equipment exhaust system with crossover tube may interfere) $ Replacement fittings for CC #18206 (pack of 5) $ Accel Oil Pressure Gauges Premium quality 60 or 100 psi. oil gauge with 1 1/2"-diameter, four color Thunder Twin dial face. Glycerin filled for vibration dampening with stainless steel housing, glass lens and solid brass internals psi oil pressure gauge $ psi oil pressure gauge, black $ psi oil pressure gauge $ psi oil pressure gauge, black $ Oil Temperature Dipstick for Late Sportsters Available with either a white face and black letters or a black face with white letters. Replaces the stock oil dipstick. Will not fit XR1200 models. Sold each Oil temperature dipstick XL models, white face....$ Oil temperature dipstick XL models, black face.....$49.99 Oil Pressure Gauge Kits for Evolution Big Twins These kits permit you to check your oil pressure at a glance while riding. They include chromeplated adapters and an oil line that connect the engine block and the rocker box. Install in minutes and fit all Evolution Big Twins from Available with 100 lb. or 60 lb. liquid-filled oil pressure gauges Kit with 100 lb. gauge $ Kit with 60 lb. gauge $ Replacement chrome fitting kit (gauge not included) $18.99 V-Twin Oil Temperature Gauges 1"-diameter face is easy to read and accurately shows oil temperatures between 50 and 350 Fahrenheit Fits most custom and OEM side-fill tanks from except Dyna Glide, Sportster and Softail models (replaces OEMs T, T)(black face) $ Fits Sportster models from and Softail models from (replaces OEMs T, T)(black face) $ Fits Softail models from (replaces OEM )(white) $25.99 Rocker Box Oil Pressure Gauges A selection of liquid-filled oil pressure gauges with unique chrome-plated adapters which permit them to be mounted to the rear rockershaft. Now you can install your oil pressure gauge in a place where you can easily read it while you re riding your bike. Installation takes only a few minutes because the adapter replaces the stock rockershaft end plug. Fit all Sportster models and Shovelhead Big Twins from with your choice of 60 lb. or 100 lb. gauges. 60 Pound Gauge Price 100 Pound Gauge Price $45.99 n/a $ $ INSTR.11

12 Chrome Oil Gauge Fittings Replacement chrome fittings for CC and most aftermarket oil gauge kits. Sold each /8" NPT female elbow. Used on XL $ Adapter 1/2"-20 male to 1/8" NPT female. Used on Big Twins $ Adapter 1/8"-20 NPT male/female. Used on Big Twins $ /2"-long 1/8" NPT pipe extension. Used on XL $ "-long 1/8" NPT pipe extension. Used on XL $ /8" NPT elbow $ Oil Pressure Gauge Adapters for Late-Model Big Twins Made from 6061-T6 aluminum and available in two different styles with two different finishes. The dual adapters permit the use of an oil pressure gauge without giving up your dash or instrumentmounted oil pressure light. The single adapters are for use with an oil pressure gauge only. Both styles fit all Big Twins (except Twin Cam models). Sold each. Natural Price Black Price $ $29.99 Dual adapter $ $29.99 Single adapter Handlebar Mounted Clocks These clocks are easy to install, the integrated housing design is made from CNC billet aluminum and is a stylish addition to any cockpit. Clocks are water resistant, available in black or chrome finish, housing measures approximately 40mm diameter & the dial approximately 30mm. Overall height 44mm. Sold each, battery included Clock for 1.25 bars, chrome $ Clock for 1.25 bars, black $ Clock for 1 bars, chrome $ Clock for 1 bars, black $39.99 Ness-Tech Radius Chrome Oil Gauge Bracket Assembly The latest Radius style features stainless housing and glass lens, filled with vibration dampening glycerin for lasting performance. Billet bracket mounts oil pressure gauge to the rear rocker box. Complete kit includes Ness 60-lb gauge, billet bracket and cone, stainless steel hose assembly and necessary mounting hardware Fits Twin Cam 88 models $ Fits Evolution Big Twin models black $ Fits Sportster models chrome $ INSTR.12 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. Please see Cautionary Information in back of catalog.

13 General Warnings. Motorcycle riding is a dangerous activity. The only way to be sure to avoid injury is not to ride! Even if you use the finest and best-maintained equipment, wear a helmet and protective clothing, and take all possible precautions, it is not possible to avoid every risk. Motorcycle accidents frequently result in serious injury, including death. Please do not operate a motorcycle or other motor vehicle when you are tired or under the influence of alcohol or drugs, or when your perception is impaired for any other reason. At all times, please wear a helmet, ride carefully and within posted speed limits, and obey all other traffic regulations and instructions from law enforcement personnel. Custom Chrome, sells aftermarket motorcycle parts for Harley-Davidson and other brands. If you do not have the necessary experience and skill, please have a qualified mechanic install any new or replacement part on your motorcycle. The failure to install properly and test any new or replacement component could adversely affect your motorcycle s operation and result in an accident, including a fatal accident. Federal and state laws and regulations impose restrictions on modifying the engine, ignition, exhaust and other components of a motorcycle intended for on-road use. In addition, these laws and regulations impose requirements on windshields, brake components, lighting, and other equipment on your motorcycle. Accordingly, certain parts in this catalog are for competition or display purposes only. In general, those parts are indicated by a Competition mark: a checkered flag in a yellow oval. If you are a retail customer, you are responsible to know the laws and regulations that govern the modification of your motorcycle. Custom Chrome is not responsible if you modify your motorcycle or any component in violation of law. If you have any questions regarding a particular component, please consult your dealer or a qualified motorcycle mechanic. The following is additional information relating to components for sale in various sections of this catalog. This information is not exclusive if you have any questions regarding the installation or use of any component, please contact your dealer, a qualified mechanic, or Custom Chrome s customer service department. These fine Jammer products are found in the 2015 Custom Chrome Catalog Use the Dealer Locator at customchrome.com to find your local Custom Chrome Dealer This symbol appearing throughout our catalog means that the specified items are high-performance exhaust, carburetor, ignition, or engine components and are not legal for use on pollution or noise-controlled vehicles (except in organized and sanctioned racing or competition events). It is a violation of federal law and the law in every state to install or use any of these components on motorcycles that are licensed for street use or used on public roads. Penalties are substantial. CCI offers these components solely for competition, display, or other off-road use, and is not responsible for any illegal application or use thereof. COPYRIGHT BY CUSTOM CHROME - A DIVISION OF DAE-IL USA, INC. ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION MAY BE REPRODUCED, STORED IN A RETRIEVAL SYSTEM OR TRANSMITTED IN ANY FORM OR BY ANY MEANS; ELECTRONIC, MECHANICAL, PHOTOCOPYING, RECORDING, OR OTHERWISE WITHOUT PRIOR WRITTEN PERMISSION OF THE PUBLISHER. INSTR.13

14 155 East Main Ave. Suite 150 Morgan Hill, CA 95037