FOOT CONTROLS. Black Billet Forward Control Kits. Chrome Billet Forward Control Kits 2.02

Transcription

1 2 Foot Controls

2 Custom Forward Control Kits by GMA GMA controls are CNC-Machined from billet aluminum and then given a chrome, polished or black anodized finish. The controls feature adjustable brake and shift levers as well as direct brake lever actuation to eliminate the flex often found in heim joints. The brake master cylinder has a 5/8 bore and is not recommended for multi-caliper applications. Fits all Softail models from Made in the U.S.A Chrome FWD control kit $ Polished FWD control kit $ Black anodized FWD control kit $ Note: Custom brake lines are required. Installation on 86 Softail models requires relocation of the oil filter. Black Billet Forward Control Kits Billet aluminum forward control kits include all mounting hardware to fit all 4-speed FL, FX and FXWG models from 58-86, and 5-speed Softail models from Kit with 5/8"-bore master cylinder for use with stock and single-piston calipers $ Kit with 3/4"-bore master cylinder for multi-piston and multiple rear calipers $ Repl. rubbers for all kits above $ Rebuild kit for 46605, and $ Rebuild kit for $22.99 Note: Custom brake lines are required. Installation on 86 Softail models requires relocation of the oil filter. Chrome Billet Forward Control Kits Billet aluminum forward control kits include all mounting hardware to fit all 4-speed FL, FX and FXWG models from 58-86, and 5-speed Softail models from Kit with 5/8"-bore master cylinder for use with stock and single-piston calipers $ Kit with 3/4"-bore master cylinder for multi-piston and multiple rear calipers $ Repl. rubbers for all kits above $ Rebuild kit for 46605, and $ Rebuild kit for $22.99 Note: Custom brake lines are required. Installation on 86 Softail models requires relocation of the oil filter. Chrome Billet Forward Control Kits Billet aluminum forward control kits include brake & shift side controls, footpegs, and all mounting hardware and feature a 5/8 bore master cylinder Fits all 4-speed FL, FX, and FXWG models from and all Softail models from and custom applications.....$ Fits all Softail models from except Deuce or Rocker Models $ Rebuild kit for 46605, and $22.99 Note: Custom brake lines are required. Installation on 86 Softail models requires relocation of the oil filter *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

3 APPAREL TC Bros. Choppers TC Bros. Choppers SEATS & BAGS FOOT HAND LIGHTING ELECTRICAL EXHAUST Universal Forward Controls with Mounting Kit by TC Bros This kit includes a pair of universal forward controls and material to make mounts for them. They can be used to fit virtually any bike. The mounting plates are 4 x 6 x 5/16 thick raw steel and the spacers are heavy duty 1/4 wall seamless DOM steel tubing. The spacers can be cut shorter if desired and the threaded rods can be cut to length as well. The fitment possibilities are endless. You can make bolt on mounts or just weld them to your frame. Custom shapes can be cut for the unique look that you are going for. This is perfect for custom choppers and bobbers or even stock bikes! Since this is a universal product, there are no instructions included Universal forward controls with mounting kit $ Sportster Forward Control Kit by TC Bros. Forward control kits are made to fit all 883 and 1200 models of Harley Davidson Sportster 5 speed from Kit features CNC machined 6061 aluminum folding footpegs with a knurled nonslip finish for great looks and performance. Heavy-duty steel mounting brackets are TIG welded and powdercoated gloss black for a highly durable finish. Mounting instructions are included for easy installation. Kit includes stainless steel linkage rods, as well as everything you need to bolt these to your Sportster. All pivot points utilize oil impregnated, precision fit bronze bushings for long life FWD Control kit $ INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE TC Bros. Choppers WHEELS TIRES & BRAKES CHASSIS SHEETMETAL Elite Forward Controls by DNA Billet aluminum forward controls with rubber inserts. Available for all 4-speed Big Twins from 58-86, and Softail models from Elite Fits all 4-speed Big Twins from and all 5-speed Softail models from $ Fits all Softail models from (except Deuce or Rocker Models) $ Universal Forward Controls by TC Bros Controls feature CNC Machined aluminum pegs that are knurled for increased grip. Pegs have 1/2-13 standard threads for easy mounting on just about any bike made! Pivot plates are powder coated black for durability Universal forward controls $ INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

4 2 Chrome Forward Controls This chrome forward control kit converts mid-shift FX or FL models with floorboards to the clean smooth lines of late Softail models. Constructed of heavy-gauge steel, both the brake and shift sides are chrome-plated and come complete with footpegs and mounting hardware. Master cylinder sold separately. Fits 4-speed models and softail models Includes shift and brake assemblies $ Note: FX models must re-use existing Original Equipment shift rod end. Chrome Forward Control Kits for Big Twin Models These affordable kits include O-ring footpegs and toe pegs, and chrome master cylinders. The brake pedals and shift levers ride on bronze bushings giving smoother pedal action. The footpeg supports have female clevis that will accept most aftermarket footpegs. Kits include installation instructions, a universal nylon brake line kit, mounting hardware and a selection of shifter rods. Fit all 4-speed FL, FX models from (except 4-speed Softail models), and 5-speed Softail models from Kit with 3/4"-bore master cylinder for use with after market calipers, for four speed models to 86 and Softails to $ Kit with 5/8"-bore master cylinder for use with stock calipers $ Note: Some late model FXs were manufactured without a mounting tab on the right end of the lower engine mount crossmember. These motorcycles require the additional purchase of a CC #17503 Weld-on Frame Tab which is sold separately *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

5 APPAREL SEATS & BAGS FOOT HAND Forward Shifter Kit This original style replacement forward control set features a heavy duty mounting bracket and comes complete with ratchet top dust cover and arm. Fits FL models from 52-E79 and FX models from Can also be used as a forward shift conversion kit on FX models from 74-E79 however, it will reverse the shift pattern. Works with floorboards or footpegs Forward shifter kit $ OEM-Style Forward Control Kits Chrome-plated kits for OEM style floorboards or 3/8" stud mount custom footpegs. The shifter kit has a splined shift lever and arm, shift peg, braced shifter backing plate, FL and FX shifter rods, and mounting hardware. The brake kits are available with or without master cylinder, and include a backing plate, brake pedal, brake pedal stop, return spring, plunger, and mounting hardware. Forward Shifter Kit For 4-speed Big Twins $ Forward Brake Kits with Master Cylinder For 4-speed Big Twins 70-E $ Forward Brake Kits without Master Cylinder For 4-speed Big Twins 70-E $86.99 LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE Available in black GASKETS TRANSMISSION & CLUTCH DRIVELINE Forward Control Sets Forward controls sold in complete sets or individually by side. Complete Sets For FL models from and FX models (hydraulic rear brake only requires longer hose) $ Brake Side Only For FL/FX models from (hydraulic rear brake only requires longer brake hose) $ For Sportster models from (left-side cableoperated brake) $ For Sportster models from (requires longer brake hose) $93.99 Shift Side Only For Sportster models from (right-side shift) $ For Sportster models from (left-side shift) $97.99 * Requires relocation of horn on some models. Forward Control Kits for Sportster Models Add that stretched-out look and extend your riding position on your Sportster. These controls feature integrated shift lever and brake lever on the footpeg shaft. Kits includes footpegs, instructions, and mounting hardware. Available in chrome or black finish and in a 2 extended version. Standard Kits Fits all Sportster models from 14-Up, Chrome $ Fits all Sportster models from 14-Up, Black $ Fits all Sportster models from 04-13, Chrome $ Forward control kit, XL models 04-13, Black $ Extended kits Forward control kit +2, XL models 04-13, Chrome $ Forward control kit +2, XL models 04-13, Black $ WHEELS TIRES & BRAKES CHASSIS SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

6 2 Chrome Forward Control Kits for Late Sportster Models Features integrated shift lever and brake lever on the footpeg shaft. Similar to the stock style forward controls found on Sportster models from that are equipped with OEM style forward controls. Fits 5-speed Sportster models from All chrome hardware and instructions included (footpegs not included) Replaces OEMs , $ Forward Control Kits for Evolution Sportster Models Available in two different versions to fit all models from Each kit includes all the necessary brackets, pedals, linkage, O-ring pegs, hardware and detailed instruction sheet to convert both brake and shifter to forward-mount style Fits all Evolution Sportster models with 4-speed transmissions from $ Fits all Evolution Sportster models with 5-speed transmissions from $ Note: CC #17545 will not fit with Original Equipment highway bars Replacement brake pedal for CC # $ Replacement shift lever for CC # $ Replacement brake pedal for EVO XL CC # $33.99 Forward Control Set for FXR Models An easy-to-install, American-engineered forward control assembly for all of the 5-speed FXR models from whether Shovelhead or Evolution-powered. Simple installation does not require the primary cover to be removed. All parts are show-chromed. A chrome cap for the thru-the-case shifter, and a complete hardware set are included Complete kit, includes brake and shifter control $ Brake Pedal only $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

7 APPAREL SEATS & BAGS FOOT HAND LIGHTING ELECTRICAL Forward Control Sets for Sportster Models Available for mechanical or disc brake models these forward control units provide a more comfortable riding position. Includes rubber footpegs with chrome end caps. Complete Kits Sets include both shift and brake controls Fits Sportster models from $ Fits Sportster models from 77-78* $ Fits Sportster models from 79-81* $ Brake Controls ONLY Available for mechanical disc brakes. Kits for hydraulic disc are designed to work with Wagner or Kelsey-Hayes style 1-piece master cylinders Fits Sportster models from Mechanical cable operated linkage. Right side brake... $89.99 Note: Kit requires extended brake line (not included) *Note: Kit requires modification to stock shift arm. Most installations will require longer motor mount bolts. Forward Controls for Dyna Glide Models Available in stock or 2"-extended length. Complete kits include ribbed foot and shifter pegs, mounting plates, control arms and all hardware. Fit all Dyna Glide models from Stock length kit $ " extended kit $ EXHAUST INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS Floorboard Forward Controls for Softail Models Chrome shifter and brake side controls with floorboards. Includes chromeplated mounting brackets, floorboards, brake pedal and heel/toe shift levers, and chrome master cylinder with cover. Use as a chrome replacement for FL Softail models, or swap from pegs to floorboards on FX Softail models, or add forward control floorboards to scratch-built machines. Fits all Softail models from Complete chrome floorboard kit $ Replacement master cylinder for CC # $ Rebuild kit for master cylinder CC # $44.99 Note: 86 and earlier models require brake line modifications and relocation of the oil filter. SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

8 2 Ness-Tech Forward Control Extensions for Softail Models Relocates the Original Equipment foot controls 3"-forward to increase legroom. Includes a pair of black anodized billet aluminum adaptor plates, extended stainless steel rear brake line, extended shifter rod, pin, and mounting hardware Fits FX Softail models from $ Fits FX Softails from $ Reduced Reach Conversion Kit for XL Forward Controls This new conversion kit repositions the original equipment foot pegs & foot controls up & back by 2 and positions the controls closer to the rider for added comfort & confidence. It provides additional leg clearance around the chassis and air cleaner, by moving the foot pegs outward 1.5 (LHS) & 0.5 (RHS). The reduced reach places the riders boot at the proper pivot point for improved leverage while maintaining the foot-forward riding profile. The kit comes with heavy duty steel mounts and shortened brake rod, reuses original equipment control supports and brake/shift levers or custom lever styles. Fits 04-Up XL models equipped with forward controls, available in chrome or black finish Reduced reach conversion kit black $ Reduced reach conversion kit chrome $ " Forward Control Extensions for Softail Models Moves the stock foot controls 3" forward to increase legroom Kits include a pair of extension plates, extended shift rod, and all necessary mounting hardware Available with a chrome finish Fits all FX Softail models from Sold in sets Chrome $ Note: Installation of these extension plates will require longer brake line to be installed *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

9 APPAREL SEATS & BAGS FOOT HAND LIGHTING Deep Cut Solo Shift & Brake Arms by Arlen Ness Machined billet aluminum construction Include Deep Cut billet shift peg, and are available in chrome or black anodize finish. Matching floorboards, covers, and many more matching accessories are available Made in the U.S.A. Brake Arm Standard Length Brake arm, Deep Cut 2014 FLT, chrome $ Brake arm, Deep Cut 2014 FLT, black $ Brake arm, deep cut chrome FLT $ Brake arm, deep cut black FLT $ Brake arm, deep cut chrome FLT $ Brake arm, deep cut black FLT $ Shortened Length Short Brake arm FLT, chrome $ Short Brake arm FLT, black $ Short Brake arm FLT, chrome $ Short Brake arm FLT, black $ Solo Shift Lever Solo shift lever, deep cut chrome FLT 84-Up $ Solo shift lever, deep cut black FLT 84-Up $ Inner Shift Lever Inner shift arm, deep cut chrome FLT 84-Up $ Inner shift arm, deep cut black FLT 84-Up $99.95 ELECTRICAL EXHAUST INTAKE ENGINE GASKETS Black Deep Cuts Retro Design TRANSMISSION & CLUTCH DRIVELINE Chrome Deep Cuts WHEELS TIRES & BRAKES Arlen Ness Heel-Toe and Brake Arm Kits for Touring models The ultimate floorboard control kits from Arlen Ness Each design is carved from billet aluminum and then either chrome-plated or black anodized Each kit includes a brake arm with peg and a heel/toe shifter set with pegs Choose from Deep Cut or Retro styling Fits FLT & 00-Up FLST Deep Cut Design Deep Cut design for Touring models, chrome $ Deep Cut design for Touring models, Black $ Deep Cut design for Touring & FLST models, chrome $ Deep Cut design for Touring & 00-Up FLST models, Black $ Retro Design Retro design for Touring models, chrome $ Retro design for Touring & 00-Up FLST models, chrome $ CHASSIS SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

10 Chrome Shift Levers Fits all FXR models from (repl. OEM T) $ Fits FL models from 74-84, and FXWG models from with splines (repl. OEM ) $ Fits all FL models from with splined shafts (repl. OEM TA) $ Fits all FX models with thru-the-case shifters, and all Softail models (except FL Softail models) from 86-89(repl. OEM TA)... $ Fits all 5-speed Evolution Sportster models from (repl. OEM T) $ Fits Evolution Sportster models from (repl. OEM TB) $ Fits Sportster models from (repl. OEM T) $ Fits Sportster models from 55-74, and early Big Twin models without splined shafts (repl. OEMs TA, ) $ Polished shift lever for Sportster models from (repl. OEM ) $ Vulcan Engineering FXR & Dyna Glide Shifter Sleeve Machined from 7075 aluminum to replace the OEM plastic shifter sleeve which leaks. This is the part that Harley recommends in their service bulletin. Includes o-rings Fits FXR models from and Dyna Glide models from (except Dyna Wide Glide models). (repl. OEM ) $33.99 Chrome Shifter Shafts Chrome-plated shifter shafts to replace the stock parts on Big Twins. Fits all 4-speed FL models from with splined shafts Replaces OEM A $16.99 Fits 5-speed FXR models with diaphragm clutch from late Replaces OEM $28.99 Fits FXWG and FX Softail models from late Also popular when removing heel/toe shifters on Fat Boy and Heritage Softail models. Splined shaft shoulder bolt type Replaces OEM $16.99 Fits FL Softail models from Replaces OEM B $24.99 Available in black Slotted Shift Lever for Sportsters Replace that dull looking shift lever with this stylish new slotted lever. Available in chrome or black finish. Sold each Shift lever, chrome fits XL models $ Shift lever, black fits XL models $38.99 Shifter Shaft Cap Use this chrome plated cap to cover the shifter shaft when installing forward controls. The cap is held in place with a flush mount sockethead screw. Fits FX, FXR and Dyna Glide models with mid-shift, and wrench is included Sold each $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

11 APPAREL SEATS & BAGS Chrome Shifter Covers Chromed replacement shifter covers Fits FL models Replaces OEM $ Fits FXSTC, FLSTF, FLST models Replaces OEM $19.99 FOOT HAND LIGHTING ELECTRICAL EXHAUST INTAKE Shift Lever Brackets Made from heavy-gauge steel with added support plates in the peg mount area for superior strength and styling. Does not crack like the Original Equipment item or other aftermarket parts. Beautifully polished and chrome-plated, and complete with bushing and zerk fitting installed, ready for use Fits 4-speed FL models from (repl. OEM ) $ Fits FL Softail models from (repl. OEM A) $46.99 ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL Chrome Shifter Support Bracket This custom shifter bracket fits 4-speed FL models from Also may be used as a forward control bracket on 4-speed FX models from Replaces OEM $45.99 INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

12 2 Late Hydraulic Brake Lever Plate Fits FL models from 73-E Replaces OEMs , A $32.99 Jockey Shift Conversion Kit This kit converts foot shift and hand clutch to Jockey Shift with foot-operated clutch. Fits all 4-speed Big Twins with wrap-around oil tanks ONLY through early 79 as well as custom applications. The shift lever is also sold separately Complete jockey shift conversion kit $ Jockey shift lever only (3/8-24 thread) $ Chrome Hydraulic Brake Pedal Fit FL models from late Brake pedal (repl. OEM ) $35.99 Hydraulic Brake Pedal for FL Models A chrome-plated pedal for FL models from 73-E Replaces OEM A.....$36.99 Brake Arm Clevis Pin Replacement brake arm clevis pin for FL models. Zinc finish, sold each Brake arm clevis pin FL models $1.99 Brake Pedal Return Spring Chrome-plated return spring with rubbercoated ends to prevent scratching. Fits all FX models from late 72-E Replaces OEM $4.99 Suicide Clutch Pedals Here s an old school part for ya! Early style suicide clutch pedal with backing plate for 74 B/Twins with jockey shift set-ups. Great item for custom retro bike builds. Made in USA by Paughco Suicide clutch pedal $68.99 Brake/Master Cylinder Springs Brake shoe return springs. Fits all Sportster mechanical brakes and Big Twin front brakes only Replaces OEM ) (Sold in pairs) $5.49 Chrome hydraulic brake pedal return spring. Fits speed Big Twins Replaces OEMs , ) (sold each) $3.99 Hydraulic Brake Stop Fits the master cylinder on 4-speed FL models from 70-E79 and FX models from 71-E Replaces OEM T......$ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

13 APPAREL SEATS & BAGS FOOT HAND LIGHTING Cobra Custom Footpegs and Shiftpegs Cobra foot & shiftpegs are CNC-Machined from 6061-T6 billet and available in a chrome, matte black or contrast cut finish and wrapped in a durable soft-touch non-slip rubber. Matching grips are available in the hand control section of the catalog. Footpegs Cobra footpegs, chrome $ Cobra footpegs, contrast cut $ Cobra footpegs, black $76.99 Shiftpegs Cobra shiftpegs, chrome $ Cobra shiftpegs, contrast cut $ Cobra shiftpegs, black $22.99 ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES Panorama Custom Footpegs and Shiftpegs These Panorama footpeg sets are precision CNC made from 6061-T6 billet aluminum and add a great look to any motorcycle. Available in a beautiful chrome, black, matt black or bronze finish. All items include our durable soft-touch non-slip rubber and are easy to install. Shift pegs available separately. Matching grips are in the hand controls section. Footpegs Panorama footpegs chrome $ Panorama footpegs matt black $ Panorama footpegs gloss black $ Panorama footpegs bronze $71.99 Shiftpegs Panorama shiftpeg chrome $ Panorama shiftpeg matt black $ Panorama shiftpeg gloss black $ Panorama shiftpeg bronze $ Stroker Billet Foot Pegs CNC-Machined from billet aluminum with a knurled finish for a non-slip grip. Available in either a chrome-plated, black anodized or bronze finish. Foot Pegs (sold in pairs) Chrome, Stroker Foot Pegs $ Black, Stroker Foot Pegs $ Bronze, Stroker Foot Pegs $69.99 Shift Pegs (sold each) Chrome, Stroker Shift Peg $ Black, Stroker Shift Peg $ Bronze, Stroker Shift Peg $19.99 CHASSIS SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

14 Custom Rubber & Billet Foot Pegs by Avon Performance Avon pegs are constructed from a durable rubber compound and are finished with billet end caps in either a chrome or black anodized finish. These pegs will fit all standard male mount clevises. Proudly made In the U.S.A. 2 Footpegs (Sold in pairs) Air Gel Chrome Price Black Price Standard $ $74.99 Custom Contour Chrome Price Black Price Excalibur $ $79.99 Gatlin $ $94.99 Rival $ $84.99 Spike $ $89.99 Standard $ $79.99 Air Cushion Chrome Price Black Price Excalibur $ $86.99 Gatlin $ $99.99 Rival $ $84.99 Standard $ $99.99 Velvet Air Cushion Chrome Price Black Price Standard $ $99.99 Tribal Chrome Price Black Price Spike $ $99.99 Flame Chrome Price Black Price Standard $ $89.99 Shift/Brake Pegs (Sold each) Air Gel Chrome Price Black Price Standard $ $27.99 Custom Contour Chrome Price Black Price Excalibur $ $34.99 Gatlin $ $47.99 Rival $ $38.99 Spike $ $32.99 Standard $ $29.99 Air Cushion Chrome Price Black Price Excalibur $ $34.99 Gatlin $ $47.99 Rival $ $38.99 Standard $ $36.99 Velvet Air Cushion Chrome Price Black Price Standard $ $36.99 Tribal Chrome Price Black Price Spike $ $36.99 Flame Chrome Price Black Price Standard $ $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

15 APPAREL SEATS & BAGS FOOT HAND Soft-Touch Footpegs by Arlen Ness The ultimate in comfort and style for the rider. Knurled rubber center provides an excellent gripping surface plus vibration dampening. Foot pegs are machined from aluminum to provide strength and durability. Shifter/brake pegs have been given extra length to provide a larger contact area for riders wearing boots. The ends of the footpegs and shifter pegs feature the Ness Scalloped design. Available in chrome or black anodize. Matching Soft-Touch grips also available. Footpegs Chrome $ Black $ Dimpled with smooth end cap, chrome $ Dimpled with smooth end cap, black $89.99 Shift/Brake pegs Chrome $ Black $ Dimpled with smooth end cap, chrome $ Dimpled with smooth end cap, black $29.99 Soft-Touch Footpegs by Arlen Ness The ultimate in comfort and style for the rider. Knurled rubber center provides an excellent gripping surface plus vibration dampening. Foot pegs are machined from aluminum to provide strength and durability. Shifter/brake pegs have been given extra length to provide a larger contact area for riders wearing boots. The ends of the footpegs and shifter pegs feature the Ness Scalloped design. Available in chrome or black anodize. Matching Soft-Touch grips also available. Footpegs Dimpled with smooth end cap, chrome $89.99 Shift/Brake pegs Black $ Dimpled with smooth end cap, black $ LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS Beveled Fusion Footpegs by Arlen Ness Designed to match the Fusion line of grips The perfect fusion of traction, style, and comfort Each foot & shift peg features intricate machining for a great look Available in chrome or black anodize finish Beveled Fusion footpegs chrome $ Beveled Fusion footpegs black $ Beveled Fusion shift/brake peg chrome $ Beveled Fusion shift/brake peg black $ Tornado Billet & Rubber Foot Pegs CNC-Machined from billet aluminum and covered with a knurled black rubber. Available in either a chrome-plated, black anodized or bronze finish. Foot Pegs (sold in pairs) Chrome, Tornado Foot Pegs $ Black, Tornado Foot Pegs $ Bronze, Tornado Foot Pegs $75.99 Shift Pegs (sold each) Chrome, Tornado Shift Peg $ Black, Tornado Shift Peg $ Bronze, Tornado Shift Peg $19.99 SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

16 Custom Chrome O-Ring Pegs Kick Pedal and Shifter Pegs (sold each) Flat O-ring kicker pedal $ Round O-ring toe peg (repl. OEM T) $7.99 Custom Pegs (Sold in pairs) /8"-24 stud mount $ /2"-20 stud mount $ Clamp-on 7/ $ Fits 5/8" square bars used in most after market highway bars $19.99 Note: When used as highway pegs, these footpegs should not be used under normal stopand-go operating conditions. Passenger Pegs (Sold in pairs) Fit most models from 71-Up Standard length pegs (repl. OEM T) $ Extended length pegs (1"-longer than stock) $ Driver Pegs (Sold in pairs) Fit Sportster models from and FX models from Replaces OEM T $29.99 Fit FXR models (except FXRD and FXRP) from and Sportster and Dyna Glide models from 91-Up (except Dyna Wide Glide models) Replaces OEM T $34.99 Replacement O-Ring Sets Contains enough O-rings for one footpeg Fits CC #19953 flat kick pedal, and #12931 or #12934 driver pegs, Replacement O-rings (pack of 10) $ Fits CC #19955 (repl. OEM T) $ For CC #12933 pegs or stud mount and clamp-on custom pegs (pack of 12) $3.99 Oval Ribbed Footpeg Large oval-shaped footpegs provide a more comfortable footrest, and add a nice visual accent. Sold in pairs Male mount $ MX Style Pegs by Burly These aggressive MX style serrated pegs offer a perfect no slip grip! Constructed from steel with a matte black finish, 2-pc design makes them easy to adjust the angle for the perfect foot positioning. If that isn t enough the Burly team even built a bottle opener into them! Fits all standard male mount applications, sold in pairs MX Style pegs, Pair $ Chrome & Rubber Gladiator Billet Footpegs These chrome and rubber billet footpegs are a perfect match to our billet controls part # & They include chrome mounts that are available with either a 3/8 or 1/2 mounting hole. Sold as a pair With 1/2 mounting hole $ With 3/8 mounting hole $ Optional Matching Shift/Brake Pegs Sold as a pair $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

17 APPAREL SEATS & BAGS FOOT HAND LIGHTING ELECTRICAL Vibra-Kushion Footpegs These state-of-the-art chrome-plated footpegs have an innovative design which provides custom styling and superior comfort. Other features of these pegs include replaceable hollow-core wear-resistant rubber insert cleats and interchangeable steel mounting clevis. Fit most early and late-model bikes. Vibra-Kushion Footpegs (Sold in pairs) Chrome Small, male mount $ Black Small, male mount $ Chrome Large, male mount $ Black Large, male mount $ Chrome Clamp on pegs. Fits 1" and 1 1/4" frame or engine guard tubing $ Stud mount 1/2" $39.99 Shifter Pegs and Kicker Pedal (sold each) Chrome Standard length toe peg $ Black Standard length toe peg $ Chrome Extended toe peg (3 1/2"-long) $ Black Extended toe peg (3 1/2 long) $10.99 Replacement Parts Mount, male (Sold in pairs) $ Rubbers (small footpeg) set of $ Rubbers (large footpeg) set of $ Rubbers (shifter toe peg) set of $3.99 Note: None of these footpegs or replacement parts are interchangeable with their KüryAkyn Iso-Peg counterparts. EXHAUST INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL INSTRUMENTS & GAUGES Vibra-Kushion Footpeg Stirrups Get more comfort without adding floorboards. These stirrups use our Vibra-Kushion footpegs, and are adjustable so that you get the right amount of heel support. Include male clevis that fit large or small-diameter Vibra-Kushion footpegs Chrome, Pair $ Black, Pair $49.99 GENERAL CROSS REFERENCE

18 Chrome and Ribbed Rubber Pegs Mount to the Original Equipment or aftermarket footpeg clevis on most models. The perfect match to our CC #12900 Handlebar Grips Large, male mount (Sold in pairs) $ Small, male mount (Sold in pairs) $ Shifter toe peg (sold each) $10.99 Replacement Parts Mount, male (Sold in pairs) $ Extended Pegs for Forward Controls Longer than the stock pegs by over an inch for additional comfort when air cleaner, or tanks have made pegs difficult to use. Use as passenger pegs to help clear Shotguns or other custom exhaust equipment. Sold in pairs Original Equipment-style $ Chrome end cap style $ Black replacement rubbers $ Rubber Footpegs with Chrome Ends Die-cast footpegs with rubber sleeves and chrome ends. Fit a variety of applications including aftermarket highway peg sets Passenger pegs (Sold in pairs) $ Black rubber toe peg with chrome end cap and short stud (sold each).. $ Chrome Spur Pegs Mount to the Original Equipment or aftermarket footpeg clevis on most models. Perfectly match our CC #12169 Handlebar Grips Large, male mount (Sold in pairs) $ Small, male mount (Sold in pairs) $ Shifter toe peg (sold each) $8.99 Replacement Parts Mount, male (Sold in pairs) $ Replacement countersunk bolt (pack of 10) $ Stock Replacement Large Diameter Footpegs Steel peg set with rubber covers. Fits FL models from 41-84, FX models from (except FXST and FXWG models), and Sportster and K models from Sold in pairs Footpeg set (replaces OEM ) $ Replacement rubbers (replaces OEM T) sold in pairs $ Chrome and Rubber Band Pegs Mount to the Original Equipment or aftermarket footpeg clevis on most models. Perfectly match our CC # s and Handlebar Grips Small, male mount (Sold in pairs) $ Shifter toe peg (sold each) $11.99 Replacement Parts Mount, male (Sold in pairs) $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Chrome Billet Footpeg Peg Mounts CNC-Machined from 6061-T6 billet aluminum 3 long with a 1 1/4 diameter clamping area fit most engine guards and any 1 1/4 dia. tubing Mounting hardware included Sold in pairs Chrome billet peg mounts $97.99 Please see Cautionary Information in back of catalog.

19 Knurled Flatband, Chrome Battistini Toe Peg, Oval Hole, Chrome APPAREL Battistini Toe Peg, Oval Hole, Black Battistini Toe Peg, Round Hole, Black Ness-Tech Shifter Toe Pegs Made of chrome-plated billet aluminum. Sold each Chrome, Knurled Flatband $ Black, Battistini Oval hole $ Black, Battistini Round Hole $56.99 Replacement Parts Toe peg rubbers (pack of 4) $5.99 SEATS & BAGS FOOT HAND LIGHTING ELECTRICAL EXHAUST Clamp-On Footpeg Sets 1 1/4" clamp-on footpeg kits with three different styles of footpegs come complete with three-piece chrome frame clamps. They will fit all Sportster frames from 82-Up and all 5-speed rubbermount frames With O-ring pegs $ With rubber cushion pegs $ With rubber pegs $49.99 Shifter Toe Pegs Wide selection of toe pegs in the market from stock to custom. Sold each Black rubber toe peg with chrome end cap and short stud (sold each) $ Stock replacement black rubber toe peg with short stud (repl. OEM T) $ Stock replacement black rubber toe peg with long stud (repl. OEM T) $ Round O-ring toe peg (repl. OEM T) $7.99 Replacement O-Rings Fits CC #19955 (repl. OEM T) $2.99 INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS Passenger Pegs for FX Models Replacement peg sets with chrome ends (replaces OEM A) Rubber peg set (Sold in pairs) $ Stud mount 1/2" $ Chrome O-ring peg set $33.99 Chrome Rear Footrest Bracket Sets Replacements for the rear brackets on 4-speed FX models thru 81, or can be used to replace the one-piece welded and stamped rear footrest brackets, and the large aluminum rear brackets fitted to 4-speed FL models from Left and right brackets alone (1/4" steel plate) $ Bracket set (includes supports and mounting hardware)..$ Passenger Peg Mounts for Dynas These chrome or wrinkle black passenger peg mounts bolt to the stock location on 06-Up Dynas. They accept any male mount style footpegs (sold separately) Passenger peg mounts chrome $ Passenger peg mounts wrinkle black $93.99 SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

20 2 Ness 1-1/4" Clamp-On Peg Mount for Highway Bars Chrome-plated, die-cast design Accepts male mount footpegs Footpeg Clamp Mount - Sold in pairs $49.99 Adjustable Footpeg Kit for Models with Forward Controls Fits into the female footpeg clevis on models with forward controls. Pegs may be rotated in a 360 arc. Kit includes everything necessary to make the conversion (except footpegs) and features flawless chrome-plating on the individual components Fits Dyna Wide Glide, FX Softail and 4-speed FXWG models 83-Up $88.99 Note: Passenger footpegs are not included in the kit. Chrome Clamp-On Peg Mounts for Highway Bars 1-1/4 These chrome plated mounts are perfect for use on highway bars and will work with any male mount peg Clamp on peg mount chrome, Sold in pairs $ Clamp on peg mount black, Sold in pairs $59.99 Offset Chrome Footpeg Extensions Provide long-legged riders with an inexpensive method of stretching out their legs without moving their controls. They move the footpegs out 3 1/2" from the centerline of the motorcycle and 2" forward. Fits FX Softail, Dyna Wide Glide and 4-speed FXWG models from 80-Up Chrome Offset Extension Brackets - Sold in pairs (footpegs not included) $42.99 Note: These peg extensions will reduce ground clearance and increase the distance from the Original Equipment footpegs to the brake and shift controls. Chrome Adjustable Highway Peg Mounts for Sportster Models Footpeg mounting arms are adjustable and can be mounted in three pre-set positions to match the riders heights and preferred riding position Features black mounting brackets with chrome footpeg arms and clevises Includes all required mounting hardware Accepts most standard male mount pegs Fits all Sportster models from $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

21 APPAREL SEATS & BAGS Chrome Highway Peg Brackets for Dyna Glide Models The perfect addition to Dyna Super Glide models or to replace stock mounts on all mid-shift Dyna Glide models from 91-Up. Includes brackets, footpeg mounts and hardware Replaces OEM (sold in sets) $71.99 Chrome Passenger Peg Mounts Stock replacement for Sportster models from Perfect for adding rear pegs to these bikes. Sold in pairs Replaces OEM T.....$25.99 Note: Passenger footpegs are not included in the kit. Footpeg D-clips Spring steel D-clip used to replace week or lost stock clip and give floppy pegs a firm hold again. 3/8 hole. Dealer pack of Footpeg d-clip $0.80 FOOT HAND LIGHTING Transmission Mount Passenger Peg Bracket for Big Twins Fits Big Twins with rigid frames. Use with any 3/8" stud-mount footpegs Sold each $ Chrome Footpeg Clevis Universal clevis for most stock or aftermarket footpegs with male shanks. Include hardware. Sold in pairs With female bolt mount......$ With male stud mount $ Footpeg bolt, nut and spring clip only, not chrome (sold each)...$2.99 Highway Peg Blocks for Sportster Models When combined with footpegs, these chrome steel blocks provide increased comfort. Include required mounting hardware, and measure approx. 6 1/2"-long. Sold in pairs For alternator Sportster models from (repl. OEM T) $35.99 Note: Highway pegs should not be used under normal stop-and-go operating conditions. Weld-On Frame Tab Weld-on right hand side frame mounting tab for all late model 4-speed Big Twins without the Original Equipment mounting tab Sold each $ Footpeg Anti-Sag D-Clips Take the sag out of droopy male mount footpegs. Replace the Original Equipment D-clips with spring steel D-clips that have a integral shim to put pegs back to a flat and level position Card of ten pairs $ Bullet-Style Footpeg Supports 3/8"-24 Stud Zinc-plated. Fits FL models from and FX models from Replaces OEM (sold each) $7.99 1/2"-20 Stud Zinc-plated. Fits FL models from and FX models from Replaces OEM (sold each) $ ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL Piece Frame Clamps Chrome-plated, 3-piece design eliminates spreading the clamp to fit over frames. Sold each " clamp 3-piece $ /8" clamp 3-piece $ /4" clamp 3-piece $9.99 Replacement Footpeg Bars Chromed steel bars for 5/8" female mount footpegs. Includes a 3/8"-16 x 3/4" grade 5 chrome-plated bolt and lockwasher. Use as replacements for broken pegs. Sold each "-long $ "-long $ "-long $9.99 OEM- Style Bracket Kits for Floorboards Replacement brackets and mounting tabs for installing floorboards Bracket kit for aluminum primary $ Bracket kit for tin primary $32.99 INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

22 Black Banana Boards by CycleSmiths CycleSmiths is now offering it s popular Banana Boards and accessories in a black powder coated finish. They still have that distinct look with their long shape and curved front & rear tips. They feature a high-grip rubber surface that is riveted to the floorboard for a very cool look. To complete the package matching passenger floorboards, footpegs, shift pegs, and brake pedal pads are also available. Rider Floorboards Fits all Touring and FL Softail from Long (19 floorboards) $ Short (14 floorboards) $ Passenger Floorboards Fits all Touring and FL Softail models equipped with accessory passenger floorboards from Sold in pairs $ Optional Accessories Standard male mount footpegs (sold in pairs) $ Shift/brake peg (sold each) $ Brake pedal pad fits all Touring and FL Softail models from 86-Up $ Banana Boards by CycleSmiths CycleSmiths Banana boards have a distinct look with their long shape and curved front & rear tips. They feature a high-grip rubber surface that is riveted to the footboard for a very cool look. They are available in a 19 or 14 lengths, matching passenger floorboards, brake pedal pad, shift pegs, and footpegs are also available Floorboards Fits all Touring and FL Softail models from Long (19 ) Banana Boards $ Short (14 ) Banana Boards $ Passenger Floorboards Fits all Touring and FL Softail models equipped with accessory passenger floorboards from 80-Up Passenger Banana Boards $ Optional Accessories Banana brake pedal pad fits all Touring models and FL Softails from 86-Up $ Banana shift peg (sold each) $ Banana male mount footpegs (sold in pairs) $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

23 Adjustable Driver s Mini-Floorboard Kit Fit into the stock female footpeg clevis on models with forward controls. In addition to 7/8" of fore-to-aft movement, they may be rotated in a 360 arc. Kit includes everything necessary for installation and features flawless chrome-plating on the individual components Fits Dyna Wide Glide, FXST, FXSTC, FXSTS, FXSTSB, and 4-speed FXWG models from $ APPAREL SEATS & BAGS FOOT HAND LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES TourEase Custom Floorboard Pads Feature non-slip rubber pads, chrome slotted covers. Ready for mounting on stock floorboard bases Sold in pairs $59.99 CHASSIS Adjustable Passenger s Mini-Floorboard Kits for Softail Models Designed to bolt to the passenger footpeg mounting points. Mini Shaker floorboards have vibration-absorbing dampers. Both kits have 7/8" of fore-to-aft movement and may be rotated in a 360 arc. Kits include everything necessary to make the conversion, and fit all FX Softail models and FLST models from 84-99, (except FLSTC models). Floorboards measure approx. 7 1/4" x 3 1/2" Kit with Shaker mini-floorboards fits all FX and FL Softail models (except FLSTC) $ Kit with Shaker mini-floorboards for all FXR models $ SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

24 Tour Ease Mini Floorboards May be installed in any clevis-style footpeg mounts, including as passenger floorboards for Softail models, or to replace the stock rider pegs on FXR or Softail models. Additional holes permit them to be rotated 15 for increased comfort Chrome, pair (measure 8"-long x 4"-wide). $ Black, pair (measure 8 long x 4 wide).... $55.99 Note: When used in place of highway pegs, these floorboards should not be used under normal stop and go conditions Replacement bolt and spacer set (Sold in pairs) $ Replacement mounting blocks (Sold in pairs) $ Fusion Series Adjustable Floorboards by Arlen Ness The perfect fusion of billet and rubber to provide the best in comfort and style Each Fusion Series floorboard is machined from 6061-T6 billet aluminum and features knurled or linear rubber inserts for excellent foot traction. Matching passenger floorboards are available for each style (Available separately) Designed to match the Arlen Ness Fusion Grip and Foot & Shift Pegs (Available separately) Driver floorboards measure: 13.8 L x 5.0 W; Passenger floorboards measure: 10.0 L x 4.0 W Each driver floorboard has 3 different mounting locations giving 3" of adjustability. Allowing you to adjust the floorboard forward and back to obtain your preferred riding position. Driver floorboards fit: FLT/FLHT/FLTR/H-D FL Trike and FLST Passenger floorboards fit: FLT/FLHT/FLHR/FLTR/H-D FL Trike Fusion driver floorboards chrome $ Fusion driver floorboards black $ Fusion passenger floorboards chrome $ Fusion passenger floorboards black $ Tour Ease Passenger Floorboards These passenger boards provide excellent comfort, and have a unique universal mounting system that promotes easy installation. Made from 12-gauge steel with rubber pads, and triple chrome-plated Set of two floorboards $ Adjustable Floorboard Kits Kits permit a full seven inches of fore-aft adjustment along with angle and height adjustability utilizing forged and chrome-plated mounting brackets. Available with modified versions of our popular oval floorboards or oval shaker floorboards. Fit all 4-speed FXWG models from 80-86, and all Softail or Dyna Wide Glide models from (except FL Softail models). May also be installed on any motorcycle with clevis-style footpeg mounts. For example, they will fit on the rear of Softail models as a set of passenger floorboards. Includes hardware and instructions Chrome, oval shaker floorboards $ Black, oval shaker floorboards $ Chrome, oval floorboards (shown) $ Black, oval floorboards $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

25 APPAREL SEATS & BAGS BEFORE AFTER Extended Reach Floorboard Kits This kit extends the rider footboard forward of the stock location by about 1.5 inches, providing the tall rider a comfortable riding position. Accepts original mounts & includes left & right footboards & rubber pads as shown, pans available in black or chrome finish. Fits 02-Up touring models, also Touring models equipped with extended reach billet style brake lever # Extended reach floorboards, black $ Extended reach floorboards, chrome $ (shown) TOP VIEW FOOT HAND LIGHTING ELECTRICAL EXHAUST BOTTOM VIEW Half Moon Rider Floorboard Kits This new design combines a classic style half-moon shaped footboard with the comfort of today s vibration isolated rubber mountings designed for long comfortable riding. Kit includes left & right footboard pans and matching rubber inserts. Fits FL Softail models Half moon floorboard kit, black $ Half moon floorboard kit, chrome $ Available in black Skull Mini Floorboards These mini Skull floorboards are great for replacing your rear passenger pegs with. Also great for hi-way bars or front driver pegs. Adjustable angles to fit your desired riding comfort. Comes in chrome with black eyes or Black with chrome eyes. Pad surface is about 4 wide x 4 long x 1-1/4 overall thickness. Mounts in most Harley female style peg clevis. Fits most Harley models 72-Up. Sold in pairs Chrome Skull Mini Floorboards $ Black Skull Mini Floorboards (not shown) $ Replacement Rubber pads (pair) $9.99 INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL INSTRUMENTS & GAUGES Reduced Reach Passenger Floorboard Brackets Reduced reach passenger floorboard brackets raise the floorboards about 2-1/4 higher for increased passenger comfort. Kits include all necessary mounting hardware and are available in either a chrome plated or gloss black finish. Fits all 93-Up Touring modes. Sold in Pairs Chrome $ Black (Repl. OEM# B) $ Chrome Undercovers for Passenger Floorboards Look good even when passenger floorboards are folded up. Simple installation limited to drilling mounting holes in the floorboard bases. Sold in pairs Chrome, Fits all Touring models $ Black, Fits all Touring models $35.99 GENERAL CROSS REFERENCE

26 Early Model Late Model Solid Floorboards for FL Models Chrome plated floorboards with solid mount pads fit 4-speed FL models from Can also be used on early steel primaries when bracket kit CC #26561 is used Sold in pairs $ Black rectangular pads (repl. OEM T) sold in pairs $ Original Equipment-Style Floorboards Available in three different versions that fit the stock mounting brackets on all 4-speed models from The oval shaker floorboards provide Original Equipment styling, with floating upper plates just like the late model floorboards. Replacement bracket kits are available separately. Floorboard Sets Standard oval floorboards (repl. OEM ) $ Rectangular shaker floorboards (repl. OEM TA) $ Oval shaker floorboards $71.99 Note: Installation of oval shaker floorboards on foot clutch models reduces the amount of travel available for the foot clutch rocker pedal. Modifications may be required on these models. Replacement Parts Black rectangular pads (repl. OEM T) sold in pairs $ Black replacement pads for oval floorboards (Sold in pairs) $ Replacement bumpers (repl. OEM ) set of $ Rectangular floorboard upper plate with pad (sold each) $11.99 Late Model Floorboards These alternatives to the stock floorboards fit all 5-speed Touring and FL Softail models from The oval shaker set has the mounting brackets offset from the center of the floorboards. Depending on which way they re installed, you ll end up with your feet approximately 1" further ahead of, or further behind, the stock position. This permits you to tailor your foot placement for increased comfort. The rectangular shaker floorboards are replacement items for crashdamaged or used motorcycles. Compatible with Original Equipment or CC replacement parts. Floorboard Sets Rectangular shaker floorboards (repl. OEM A) $ Black, Rectangular shaker floorboards (repl. OEM A) $ Standard oval floorboards $51.99 Replacement Parts Black rectangular pads (repl. OEM T) sold in pairs $ Black replacement pads for oval floorboards (Sold in pairs) $ Replacement bumpers (repl. OEM ) set of $ Rectangular floorboard upper plate with pad (sold each) $11.99 Vintage-Style Floorboards for Touring and Softail Models Chrome plated vintage style floorboards feature raised footpad and antivibration dampeners for a comfortable ride. Fits all Touring models from 80-Up, and FL Softail models from 86-Up. Replacement rubber pads and vibration dampener kits are also available separately Floorboard set (repl. OEM T) $ Black replacement pads for oval floorboards (Sold in pairs) $ Replacement bumpers (repl. OEM ) set of $0.87 Colored Rectangular Floor Mats Add a splash of color to your rectangular floorboards with these out of sight floorboard mats available in white, teal, blue, yellow, red & black. Look great when used along with our colored grips, seats etc. Sold in pairs Early style floorboard mats Green $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

27 APPAREL SEATS & BAGS FOOT Colored "Oval" Floorboard Mats These Colored "Oval" Floorboard Mats fit stock FL models plus any aftermarket oval floorboards fitted to custom Bobbers. Available in red or black. A super trick way to class up your ride! Affix with adhesive or rivets. A great look when used along with our Solo Seats, vintage style grips and kicker pedals which are also available in matching Red or Black! Replaces OEM# Sold in pairs Floorboard Mats, Oval - Red...$ Black replacement pads for oval floorboards (Sold in pairs).....$9.99 Clutch and Brake Pedal Pads Three piece rubber clutch & brake pedal pads for use with early foot rocker clutch & brake pedal. Great for restorations or retro styled customs. Available in black or white Clutch and Brake Rubber Pads 3 Piece set Black $ Clutch and Brake Rubber Pads 3 Piece set White $24.99 Floorboard Heel Guard These new rider footboard heel guards avoid damage to your boots and prevent melted rubber & scuff marks on your exhaust. This heel guard mounts to the right-side footboard and protects your boot from contact with the hot exhaust/ shield. The subtle curved shape keeps the boot heel away without restricting fore & aft movement of the rider s foot. Kit includes chrome or black heat resistant steel guard with all mounting hardware. Easy to install & sold each. Fits: FLD models, Touring & FL Softail models equipped with traditional and swept wing footboards Floorboard heel guard, chrome $ Floorboard heel guard, black $29.99 HAND LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH Brake Pedal Pad Kit Provides you with a larger, easier-to-use rear brake pedal. Fits most Big Twin models from Kit (replaces OEM TA) $ Brake pedal rubber only (replaces OEM ) $3.99 Brake Pedal Pad Replacement pad for FX Softail and Dyna Wide Glide models from 84-14, and speed FXWGs Replaces OEM T (sold each) $4.99 Brake Pedal Pads Fits FX Softail and Dyna Wide Glide models from 84-Up, and speed FXWGs Slotted $ Diamond $14.99 DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL INSTRUMENTS & GAUGES Brake Pedal Rubber Replacement black rubber for the brake pedal on all early 4-speed FL models Replaces OEM T (sold each) $2.99 GENERAL CROSS REFERENCE

28 Billet Shift Linkages by Landmark Landmark gear shift linkages come complete with transmission lever cover - easily installed in just 5 minutes. We use aircraft quality rod-ends for a tighter and smoother shift. The new look is finished off with the provided custom nuts and bolts. For Softail and Touring Models 86-Up Barbed wire shift link chrome $ Skull shift link chrome $ Slotted shift link black $ Slotted shift link chrome $ Shotgun shift link black $ For Dyna Models with Forward Controls 06-Up Skull shift link chrome $ Slotted shift link chrome $ Slotted shift link black $ For Sportster Models with Forward Controls 04-Up Skull shift link chrome $ Skull shift link black $ Slotted shift link chrome $ Slotted shift link black $ Shotgun shift link black $99.99 Small-Diameter Shift Linkages by Landmark Complete sets that include the rod, heim joints, lever shroud and hardware. Available in highly-polished stainless steel versions, or chrome-plated. Features a smaller diameter rod than Landmark s standard round rods. Polished Stainless Steel "-extended for all 5-speed Softail models (except FLSTS) from 86-Up (13 3/4"-long)... $90.99 Chrome-Plated Fits all 5-speed Softail models (except FLSTS) from 86-Up (11 3/4"-long) $ "-extended for all 5-speed Softail models (except FLSTS) from 86-Up (14 3/4"-long)... $ "-extended for all 5-speed Softail models (except FLSTS) from 86-Up (15 3/4"-long)... $ Fits all Dyna Wide Glide models from $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

29 APPAREL SEATS & BAGS FOOT HAND LIGHTING ELECTRICAL Custom Billet Shift Linkages Choose from a wide variety of cutting edge designs. CNC- Machined from billet aluminum and then beautifully chromeplated. These pieces will dress-up any bike. They measure long and will fit most Softail and Touring models. Includes (2) 5/16-24 studs and (4) 5/16-24 jam nuts. Requires separate purchase of heim joints (sold separately) Tribal Flame $ Maltese Cross with Flames $ Three Skulls $ Flaming Skulls $ Trucker Girl $ Gothic $ Gothic Sword $ Tribal Spade $59.99 Optional Chrome Heim Joints Chrome 5/16-24 female heim joints Sold each $ Custom Billet Shift Linkages Custom shift linkages CNC-Machined from 6061-T6 aluminum and available in either chrome-plated or black highlighted version. Fits all 86-Up Softail and Touring models (except FLSTS models) measures 9 3/16 long end to end (heim joints sold separately) Chrome Hole-Shot shift linkage $ Cryptic shift linkage $ Raptor shift linkage $44.99 Black Hole-Shot shift linkage $ Cryptic shift linkage $ Raptor shift linkage $44.99 Fits all 04-Up Sportster models comes complete with all hardware Hole-Shot shift linkage $ Talon shift linkage $55.99 TC Bros. Choppers EXHAUST INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL Shift Linkage for Softail Models with Crossover Exhaust by Landmark Top-quality polished stainless steel by Landmark won t peel, pit, chip or discolor. Easy-to-install, includes all hardware Fits FLSTS Heritage Springer Softail models from $ Universal Linkage Kit by TC Bros Universal Linkage Kit for all TC Bros Choppers forward control kits. The rods/tubes will need to be cut to fit your application. KIT INCLUDES: two 24 long 5/16 threaded rods, four 5/16 ball joints, two 5/16 ID x 1/2 OD raw steel tubes (to cover rod threads and increase rigidity), eight 5/16 jam nuts, four nylock nuts, and four flat washers Universal linkage kit $49.99 INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

30 Chrome Shift Linkage Measures 10 3/4"-long with 5/16"-24 threads, and is chrome-plated. Fits Softail models with forward controls from 86-Up (except FLSTS models from 97-03), as well as other custom applications Complete kit (replaces OEM A) $ Shifter rod ONLY (replaces OEM 11729) $7.99 Chrome Shifter Rod End Replacement chrome shift rod end for Softail models from 84-Up, 4-speed FXWG models from and Dyna Glide models from Also great for custom linkage applications using 5/16"-24 threads (replaces OEM ) Sold each $ Chrome Shifter Linkage Includes gear shifter rod end, shoulder bolt with locknut, shifter rod and clevis. Fits FX models and FL foot shift models Complete kit $24.99 Chrome Shifter Rod Fits all Softail models from 86-Up (except FLSTS models from 97-10) Shifter rod ONLY (replaces OEM 11729) $7.99 Chrome Rod End Fits all Big Twins from with hand or foot shift Replaces OEMs , $7.99 Chrome Clevis Pins These chrome-plated clevis pins include the washer and cotter pin. Fits many applications from Replaces OEM (pack of 10) $0.90 Chrome Shift Rod Spherical Joint Improves the looks of shifter linkages. Fits all Softail models from 86-96, most aftermarket forward control sets and many early models. Sold each Replaces OEM $7.99 Landmark Heim Joints Aircraft-quality rod ends ensure durability and smooth shifting. Replace most heim joints with 5/16"-24 right hand threads. Sold each Stainless steel $ Chrome $24.99 Chrome Heim Joints These flawlessly-plated units can serve a variety of uses, particularly when fabricating custom shift and brake linkages. The 5/16" heim joints are available with right and left hand threads to make links that are adjustable without disassembly. Made in the U.S.A. Sold each /4" x 1/4-28 female $ /16" x 5/16-24 male $ /16" x 5/16-24 female $ /16" x 5/16-24 male (left hand thread) $ /8" x 3/8-24 female $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

31 APPAREL SEATS & BAGS Chrome Rear Master Cylinder Chrome-plated reproduction of the Girling master cylinder fitted to all FX models from 83-E87 (except 84 FXE). May also be installed on 82-E87 FXR models, but the pipe plug on the back will have to be removed for stop light switch installation Replaces OEMs A, A $ FOOT HAND LIGHTING ELECTRICAL Wagner-Lockheed Type Master Cylinders Fit hydraulic drum brake applications on FL models from or FX models from 71-72, and rear disc brake applications on FL and FX models from 73-E79. For drum brake applications from (replaces OEM ) Chrome $ Ball burnished $49.99 For disc brake applications from 73-E79 (replaces OEM ) Chrome $ Ball burnished $49.99 Replacement Parts Imported rebuild kit (repl. OEM A) $ Rebuild kit. Fits disc or drum brake applications $ Replacement chrome cap ONLY $ Dust boot for Big Twins (repl. OEM ) pack of $ Dust boot for 70-E79 Big Twins (repl. OEM ) pack of $ Chrome Late-Model Rear Master Cylinders Chrome-plated reproductions of the 5/8"-bore Original Equipment units with the ribs polished off before plating. The units for models also feature custom top covers Fits Sportster models from 82-E87 and FL Softail models from late 86-E87 (repl. OEMs A, ) $ Fits Sportster models from late (repl. OEM B) $ Fits FL Softail models from late (repl. OEM D) $ Rebuild kit for CC # $ EXHAUST INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS Chrome Rear Master Cylinder for Touring Models Tired of looking at that black master cylinder? Don t want a bulky chrome cover? Replace your stock master cylinder with this beautiful chrome piece! Replaces OEM Sold each Chrome rear master cylinder for FLT models $ Kelsey-Hayes Type Master Cylinders Chrome reproductions of the Kelsey-Hayes master cylinder. Fits Sportster models, late FX models and 83 FXEs. Kit includes all internal components, boot, cover gasket and chrome top cover Complete 3/4"-bore master cylinder for applications using Original Equipment-style rear calipers $ Complete 5/8"-bore master cylinder for custom applications with multipiston calipers $ Master cylinder rebuild kit (repl. OEM B) $ Replacement master cylinder cap gasket (repl. OEM , pack of 5) $ Replacement rubber dust boot (repl. OEM , pack of 5) $1.60 Note: CC #26248 master cylinder may also be installed on 79 Sportster models if modifications are made to the hard line between the brake tee and the master cylinder SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

32 Chrome Master Cylinder Covers Chrome replacement front master cylinder covers for 08-Up Touring models Chrome clutch master cylinder cover, fits all 08-Up Touring models $ Chrome front brake master cylinder cover, fits all 08-Up Touring models $17.99 Replacement parts Replacement rubber gasket for # $ Replacement rubber gasket for # $3.99 Master Cylinder Cover Fits 4-speed FL models from late 79-84, FLT models from 80-82, FXWG models from 80-82, and FL Softail models from Replaces OEM T $15.99 Chrome Master Cylinder Cover Fits front handlebar-mounted master cylinders on all models from L Cover, replaces OEMs , $11.99 Rebuild Kit for Wagner-Lockheed Master Cylinder Rebuild kit for use on Wagner-Lockheed type master cylinders used on FL and FX models Imported rebuild kit (repl. OEM A) $9.99 Early Master Cylinder Cover Gasket Fit all models from (pack of 10) Replaces OEM $1.30 Late Master Cylinder Cover Gasket Fits the rear master cylinder on late FL and late FX models, the rear master cylinder on Sportster models as well as the rear master cylinder remote reservoirs on Big Twins from Replacement master cylinder cap gasket (repl. OEM , pack of 5) $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

33 APPAREL SEATS & BAGS FOOT Master Cylinder Rebuild Kits Rear master cylinder rebuild kit for all models from late Replaces OEM A $38.99 HAND LIGHTING ELECTRICAL Rear Master Cylinder Rebuild Kits Complete rear wheel master cylinder rebuild kit. 5/8" Fits all Sportster models 82-E87; FX models 83-86; Softail models 84-E87 (repl. OEM A) $11.99 EXHAUST INTAKE Master Cylinder Rebuild Kits Complete rear master cylinder rebuild kits Fits Sportster, FXR, 87-Up Softail, 91-Up Dyna and Touring models (repl. OEM ) $ Fits 07-Up Sportster models (repl. OEM A)....$ Fits Sportster models (repl. OEM B).....$32.99 ENGINE GASKETS Master Cylinder Rebuild Kits for FXR, Dyna Glide and FLT/FLHT Models 11/16" All the components needed to restore braking performance Rear for all FLT, FLHT and FLHS models from (repl. OEM ) $ Front for all FLT, FLHT and FLHS models from 87-95; FXRT and FXRS models from and Dyna Glide models from $ TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS Master Cylinder Boots Fits the rear master cylinder on Sportster models, late FX models, and 83 FXE models Replacement rubber dust boot (repl. OEM , pack of 5) $1.60 Fits the rear master cylinder on most models from 80-E Replaces OEM (pack of 5) $2.60 Fits the rear master cylinder on Big Twin models from 70-E Dust boot for 70-E79 Big Twins (repl. OEM ) pack of $1.60 Fits the rear master cylinder on Big Twin models from Dust boot for Big Twins (repl. OEM ) pack of $1.20 SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

34 Crush Washers Top-quality washers are made in the USA for the following applications. Sold in packs of Master cylinder for Big Twins from 83-89; Sportster models from 82-E89 (repl. OEM ) $ Master cylinder for Big Twins from 84-91; Sportster models from 84-E91 (repl. OEM ) $ Crush washers, 10 mm, Brake line for Big Twins from (repl. OEM ) Pack of $ Washers for Banjo Bolts Sealing washers for the front and rear banjo fittings. Sold in packs of mm. Fits dual disc handlebar master cylinders and brake calipers on most models (repl. OEM ) $ mm. Fits all single disc handlebar master cylinders (repl. OEM ) $1.00 Chrome Brake Line Fittings These brake line fittings are used on handlebar mounted master cylinder and front or rear brake line tees. Fit many models from Sold in packs of Plug 1/8" NPT (repl. OEM ) $ Straight male 1/8" NPT to female 3/8"-24 inverted flare (repl. OEM ) $ (repl. OEM , pack of 5) $ Banjo Bolt 3/8"-24 banjo bolt fits 10mm banjo and includes sealing washers (repl. OEM ) Sold each $8.99 Master Cylinder Spacers Chrome spacers have a 3/8"-diameter hole, are 1/4"-thick and fit between the Wagner- Lockheed style rear master cylinder and its backing plate. Fit all Big Twins from 58-E79, and can be used as a universal spacer in other applications Replaces OEM (pack of 5) $1.40 Chrome Master Cylinder Plungers Fits all Big Twin models with Wagner Lockheed master cylinders. Sold each (repl. OEM )....$ E79 (repl. OEM )...$ Brake Light Banjo Bolts by Goodridge Combines a banjo bolt with a brake light pressure switch. Great for custom work. Zinc-plated or gold with flexible plastic sleeve covers and 11"-long wiring pigtail. Two sizes available for disc brake applications. Sold each. Gold /8"-24 for 10mm banjo......$ /16"-24 for 12mm banjo.....$18.99 Zinc-Plated /8" $ /16" $20.99 Goodridge Chrome Double Banjo Bolt This chrome banjo bolt allows 2 banjos to be fitted for dual caliper applications. Use it on front dual disc models to run lines directly from caliper to master cylinder and eliminate T fittings, or on the rear to link two calipers together. 3/8"-24 threads fits most front dual disc master cylinders, rear calipers and rear master cylinders Sold each $6.99 Chrome Brake Rods and Rod Clevis Foot pedal brake rod 10"-long (front). Fits Big Twins (replaces OEM ) $ Rear brake rod 23"-long. Fits Big Twins (replaces OEM ) $ Short clevis for foot pedal brake rod. Fits Big Twins (replaces OEM ) $ Long clevis for foot pedal brake rod. Fits 45s from 35-52, Big Twins and Servi-Cars (replaces OEM ) $ Rear brake rod and clevis 22 5/16"- long. Fits Sportster and K models from (replaces OEM ) $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.