Proudly Distributed by

Transcription

1 Proudly Distributed by

2 Table of Contents Santee Handle Bars Santee Exhaust Santee Frames *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.

3 These fine Santee products are found in the 2013 Custom Chrome Catalog 3

4 Santee 1 1/4 Chrome Handlebars These bars are the latest offering from Santee, these bars feature a swedged which means you get a smooth transition from the 1.25 diameter to the 1 area for mounting the OEM or any custom hand controls with 1 mounts. This taper also allows you to rotate the control to any angle for both clearance and optimum comfort. Constructed of steel tubing and CNC bent for smooth lines, each set of bars comes pre-drilled and with a pull-wire already installed in the bars so pulling your wire harness through the bars will be much faster and easier. Available in a variety of sizes, fitments, and finishes /4 Dresser Ape Hangers These handlebars have all the features listed above but were designed to fit FLHT/C/U/X models from including Throttle-By- Wire applications. For internal wiring only. Chrome Handlebars Ape Hangers (width 37, height 11, center 15.75, pullback 8.5 ) $ Ape Hangers (width 37, height 14, center 15.75, pullback 8.5 ) $ Ape Hangers (width 37, height 17, center 15.75, pullback 8 ) $ Ape Hangers (width 37, height 19, center 15.75, pullback 8 ) $ Black Powder Coated Handlebars Ape Hangers (width 37, height 11, center 15.75, pullback 8.5 ) $ Ape Hangers (width 37, height 14, center 15.75, pullback 8.5 ) $ Ape Hangers (width 37, height 17, center 15.75, pullback 8 ) $ Ape Hangers (width 37, height 19, center 15.75, pullback 8 ) $ Standard 1 1/4 Ape Hangers Standard Ape Hangers are designed to fit all Big Twin and Sportster models from (except FLHT models) these handlebars will also work with Throttle-By-Wire applications. Chrome Handlebars Ape Hangers (width 33.75, height 11, center 10, pullback 11 ) $ Ape Hangers (width 33.75, height 14, center 10, pullback 11 ) $ Ape Hangers (width 33.75, height 17, center 10, pullback 11 ) $ Ape Hangers (width 33.75, height 19, center 10, pullback 11 ) $ Black Powder Coated Handlebars Ape Hangers (width 33.75, height 11, center 10, pullback 11 ) $ Ape Hangers (width 33.75, height 14, center 10, pullback 11 ) $ Ape Hangers (width 33.75, height 17, center 10, pullback 11 ) $ Ape Hangers (width 33.75, height 19, center 10, pullback 11 ) $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.

5 Santee Designer Series Bonanza Handlebars by Fred Kodlin These are the latest new and improved design Bonanza Bars II from Fred Kodlin of Murdercycles. They are available in a Flat, 'Low', Medium, High, and in a Touring version and are available in either a chrome-plated or black finish. Drilled for internal wiring, designed for use with style handlebar controls. Bonanza Bars for FLH/FLHT Touring Models 38 wide, 15 rise, 14.5 center, 8.5 pullback, 1.25" dia Chrome (will work with 'Throttle-by-Wire') $ Black (will work with 'Throttle-by-Wire') $ " Bonanza Fat Bars 'Medium' Bonanza Fat Bars, Chrome (32" wide, 14" rise, 7" center, 6" pullback, 1.25" dia.) $ 'Medium' Bonanza Fat Bars, Black (32" wide, 14" rise, 7" center, 6" pullback, 1.25" dia.) $ 'Low' Bonanza Fat Bars, Chrome (32" wide, 11" rise, 7" center, 6" pullback, 1.25" dia.) $ 'Low' Bonanza Fat Bars, Black (32" wide, 11" rise, 7" center, 6" pullback, 1.25" dia.) $ Bonanza Bars II - Wide Version 'High' wide Bonanza II, Chrome (36" wide, 15" rise, 12" center, 5 1/2" pullback, 1" dia.) $ 'High' wide Bonanza II, Black (36" wide, 15" rise, 12" center, 5 1/2" pullback, 1" dia.) $ 'Medium' wide Bonanza II, Chrome (36" wide, 13" rise, 12" center, 5 1/2" pullback, 1" dia.) $ 'Medium' wide Bonanza II, Black (36" wide, 13" rise, 12" center, 5 1/2" pullback, 1" dia.) $ Bonanza Bars II - Narrow Version 'High' narrow Bonanza II, Chrome (34" wide, 15" rise, 9" center, 5 1/2" pullback, 1" dia.) $ 'High' narrow Bonanza II, Black (34" wide, 15" rise, 9" center, 5 1/2" pullback, 1" dia.) $ 'Medium' narrow Bonanza II, Chrome (34" wide, 13" rise, 9" center, 5 1/2" pullback, 1" dia.) $ 'Medium' narrow Bonanza II, Black (34" wide, 13" rise, 9" center, 5 1/2" pullback, 1" dia.) $ Flat Bonanza Bars 29 wide, 1 built-in riser, 5 pullback, 1" dia Black $

6 Santee 1 Ape Hanger Handlebars 1 steel handlebars, works with either early or late model style controls (except throttle-by-wire models). Available in 10, 12, and 16 heights and in either a chrome-plated or Satin black powder coated finish. Not knurled. Pre-82 models 10 rise, 32.5 width, 7 pullback, 8 center Ape Hanger, Chrome $ Ape Hanger, Satin Black $ rise, 34.5 width, 7 pullback, 8 center Ape Hanger, Chrome $ Ape Hanger, Satin Black $ rise, 35 width, 7 pullback, 8 center Ape Hanger, Chrome $ Ape Hanger, Satin Black $ up models (with wiring recess) 10 rise, 32.5 width, 7 pullback, 8 center Ape Hanger, Chrome $ Ape Hanger, Satin Black $ rise, 34.5 width, 7 pullback, 8 center Ape Hanger, Chrome $ Ape Hanger, Satin Black $ rise, 35 width, 7 pullback, 8 center Ape Hanger, Chrome $ Ape Hanger, Satin Black $41.99 Santee 1 Ape Hanger Handlebars Pre-Drilled for Internal Wiring 1 steel handlebars are knurled and pre-drilled for internal wiring for a custom look and works with either early or late models style controls (except throttle-by-wire models). Available in 10, 12, and 16 heights and in either a chrome-plated or satin black powder coated finish. 10 rise, 32.5 width, 7 pullback, 8 center Ape Hanger, Chrome $ Ape Hanger, Satin Black $ rise, 34.5 width, 7 pullback, 8 center Ape Hanger, Chrome $ Ape Hanger, Satin Black $ rise, 35 width, 7 pullback, 8 center Ape Hanger, Chrome $ Ape Hanger, Satin Black $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.

7 Available in black Santee 1 Wide and Low Handlebars 1 steel handlebars, works with either early or late model style controls (except throttle-by-wire models). Available in different widths to optimize comfort and in either a chrome-plated or black powder coated finish. Pre-82 models wide Drag bar, Chrome $ wide Drag bar, Black $ wide Drag bar, Chrome $ wide Drag bar, Black $ wide Drag bar, Chrome $ wide Drag bar, Black $ wide Drag bars, Chrome $ * XLX style, Chrome (5 rise, 32 wide, 7 pullback, 6 center) $ * XLX style, Black (5 rise, 32 wide, 7 pullback, 6 center) $ models (except Touring) wide Drag bar, Chrome $ wide Drag bar, Black $ wide Drag bar, Chrome $ wide Drag bar, Black $ wide Drag bar, Chrome $ wide Drag bar, Black $ "-wide with slight rise and 2" pullback, Chrome $ * XLX style, Chrome (5 rise, 32 wide, 7 pullback, 6 center) $ * XLX style, Black (5 rise, 32 wide, 7 pullback, 6 center) $ /4 T-Bars These bars are designed to fit most models from including Throttle-By-Wire applications with 3.50 center to center riser mounting holes. For internal wiring only. Chrome T-Bars T-Bar (width 30, height 6, pullback 11 ) $ T-Bar (width 30, height 8, pullback 11 ) $ T-Bar (width 30, height 10, pullback 11 ) $ Black Powder Coated T-Bars T-Bar (width 30, height 6, pullback 11 ) $ T-Bar (width 30, height 8, pullback 11 ) $ T-Bar (width 30, height 10, pullback 11 ) $ Straight-Up 1 1/4 T-Bars These are the perfect bars to give your ride that aggressive, no non-sense look. They feature straight risers, pre-drilled for internal wiring (with a pre-installed pull wire) and will fit all models from including Throttle by Wire applications. Available in a chrome-plated or gloss black finish.77cm Chrome Straight-Up T-Bars, Chrome $ Straight-Up T-Bars, Chrome $ Straight-Up T-Bars, Chrome $ Black Straight-Up T-Bars, Black $ Straight-Up T-Bars, Black $ Straight-Up T-Bars, Black $

8 Santee Santee Designer Series Double Barrel High Exhaust by Cycle Kraft Designed by Kenji Nagai of Cycle Kraft Japan. These are the hottest pipes on the market, available in chrome or black finish with optional heat shields. Include billet steel end caps and baffles Double Barrel High, chrome fits Softails $ Double Barrel High, black fits Softails $ Double Barrel High, chrome fits Softails $ Double Barrel High, black fits Softails $ Double Barrel High, heat shields, chrome $ Double Barrel High, heat shields, black $ Santee Designer Series Double Barrel Low Exhaust by Cycle Kraft Designed by Kenji Nagai of Cycle Kraft Japan. This is the second version of his double barrel pipes, available in chrome or black finish with optional heat shields. Include billet steel end caps and baffles Double Barrel Low, chrome fits Softails $ Double Barrel Low, black fits Softails $ Double Barrel Low, chrome fits Softails $ Double Barrel Low, black fits Softails $ Double Barrel Low heat shields, chrome $ Double Barrel Low, heat shields, black $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.

9 Fastbacks Pipes for Softails by Custom Chrome Custom Chrome s latest creation in exhaust designs. Choose between black or chrome finish, heat shields are available in either finish (sold separately) so you can mix and match to your taste Fastbacks, chrome Softails $ Fastbacks, black Softails $ Fastbacks, chrome Softails $ Fastbacks, black Softails $ Fastbacks, chrome heat shields $ Fastbacks, black heat shields $ Santee Santee Holeshot Pipes for Sportsters Midmount pipes designed to set your bike apart from the crowd. Available with black or chrome drilled heat shields and delivered with baffles and mounting hardware Holeshot pipes XL chrome $ Holeshot pipes XL black $

10 Chrome Billet End Cap Pipe Full-Radius Heat Shield Santee 2 1/2" Snub Nose Exhaust Pipes Subtle as a nuclear blast these pipes rock! Featuring fat 2 1/2" maximum coverage heat shields for a huge look that keeps your pipes looking new and virtually eliminates blueing. Each pipe is constructed of heavy-duty 16-gauge steel and include heavy-duty mounting brackets and chrome billet end caps with integral baffles complete the package. Like all Santee pipes these beauties are engineered to survive For Softail models 86-11, chrome $ For Softail models Black $ For Softail models chrome $ For Softail models black $ For Dyna models chrome $ For Dyna models black $ For Dyna models chrome $ For Dyna models black $ For Sportster models from $ For Sportster models from black $ Crossover Santee Drag Pipes for Touring Models Santee Designer Series BOA Created with 2 1/4" pipe then beautifully polished and chromed, the BOA is a lethal combination of performance and style. For Softail models For Softail models $ For Softail models $ Optional chrome heat shield set with hardware $ Distinct dual exhaust systems featuring 2 1/4" straight pipes to deliver wicked sound and all the power you can handle. The Crossover system has one pipe exiting on each side Crossover exhaust system $ Crossover exhaust Chrome $ Crossover exhaust Black $ Optional baffle for 2 1/4" pipes (sold each) $31.99 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.

11 Santee Designer Series Y Pipes by John Reed Created by Custom Chrome s master designer John Reed to make a statement and make it with authority. Available in 1 3/4" and 2" with a tasty show chrome finish. Unless your neighbors are bikers too, you re going to ruffle some feathers with these pipes! /4" for Softail models $ /4 for Softail models black $ /4 for Softail models chrome $ /4 for Softail models black $ /4" pipes for Pandemonium & Jammer 88 Shovelheads or Pan/Shovel with STD cylinder heads $ " for Softail models $ for Softail models black $ for Softail models chrome $ for Softail models black $ " for FX and FL Shovelheads $ for FX and FL Shovelheads, black $ Optional Heat Shields Optional heat shields for #11447 & $ Optional heat shields for # & $ Optional heat shields for # $ Optional heat shields for # $ Santee 'Lake Pipes' She purrs like a kitten till the Lake Pipes roar (Beach Boys)! Styled after the classic Street-Rod side pipes, they must be seen and heard to be believed. 2" head pipes constructed of 16 gauge steel Choice of 2 outlet lengths "-long outlet for Softails 86-11, chrome $ "-long outlet for Softails 86-11, black $ long outlet for Softails 12-13, chrome $ long outlet for Softails 12-13, black $ "-long outlet for Softails 86-11, chromé $ "-long outlet for Softails 86-11, black $ long outlet for Softails 12-13, chrome $ long outlet for Softails 12-13, black $ Note: Will not fit models with floorboards Santee 11

12 Santee Designer Series Venom Pipes by Big Bear Choppers 2 1/4 Drag Pipes These 2" pipe sets are constructed of 14-gauge seamless tubing and feature extreme slash cut tips. They come complete with mounting brackets Venom for stock Softail models $ Venom for Softail with 5/8" offset motor mounts $ Venom for stock Softail models $ Chrome heat shield set $ Big Mama Pipes for FX Softail Models from Santee Designer Series Skirt Blowers Exhaust by Paul Yaffe Originals Go BIG with 225 s from Santee! Huge 2 1/4 -diameter pipes deliver wicked sound and all the performance you can handle. Made from 16 gauge seamless tubing. For Softail Models For Softail models 84-11, chrome $ For Softail models Black $ Optional baffle for 2 1/4 pipes (sold each) $ /4" pipes featuring vertical slash cut tips which accent the angle of the swingarm. This unique set of show-chromed pipes provides a sleek custom look. Manufactured of heavy 16 gauge steel tubing, precision bent on computer controlled equipment and hand checked to ensure a perfect fit For Softail models from $ For Softail models $ For Softail models $ Optional baffle for 2 1/4" pipes (sold each) $ The latest and sickest pipe design from the mind of Paul Yaffe. Straight up in your face styling with a multi-piece heat shield design that will totally set your bike apart from the crowd. Includes a set of velocty stack exhaust tips for a race-ready, all-business look For Softail models 86-11, chrome $ For Softail models 86-11, black $ For Softail models 12-13, chrome $ For Softail models 12-13, black $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.

13 1 3/4" Shotgun Drag Pipes Classically styled high quality Shotgun Drags are made of 16 gauge steel with beautiful chrome plating, great bends and hot performance. Optional baffles may be used if a quieter exhaust note is desired For Softail models $ For Softail models from $ Baffles fits 1 3/4"-diameter pipes $3.99 Note: The installation of this pipe set on Fat Boy and FLSTN models will require the removal of the stock rear exhaust pipe mounting bracket. 1 3/4" S -Style Drag Pipes These slick looking drags have an S shaped rear pipe that crosses the transmission stacked above the front pipe. Available in a variety of styles, they are constructed of 16 gauge steel and feature flawless chrome plating Each set uses hidden channel mounts and includes all necessary hardware and brackets except where noted otherwise. Shorty Kickdown Drags for Softail Models from Includes an innovative chrome plated exhaust bracket that replaces the tubular Original Equipment part Slash-Cut Drags for Softail models $ For 4-Speed FL Models (with kick or electric start) 40"-long drag pipe set has an inside-the-frame front pipe that fits with factory floorboards and forwardmounted master cylinder. The under-the-transmission rear pipe clears the large battery, factory safety bars and saddle bags. Easily mounted using optional P -clamps. Floorboard models require an optional Floorboard Adaptor /4" Drag pipes $ Floorboard adaptor, Sold each $ P-Clamps 1 3/4" $ Baffles fits 1 3/4"-diameter pipes $3.99 For FX Models and 4-Speed FL Models Clear all Original Equipment footpeg and control positions and provide superior fit with excellent ground clearance. Complete with concealed channelmounts, chrome mounting bracket, exhaust port gaskets, sockethead exhaust port screws with lockwashers, and installation instructions. Optional baffles may be installed when a quieter exhaust note is desired Slash-Cut Drags $

14 Santee 1 3/4" Drags Dyno Power drag pipes add both style and performance. These smooth bracketless pipes may be mounted with P -clamps or with the universal chrome exhaust mounting brackets listed below. Dyno Power drags accept baffles when quieter exhaust note is desired For Sportster models "-long drag pipes mount using the universal drag pipe mounting brackets listed below. 80 and later models require optional Brake Pedal Stop. Will not fit XLCR, 79, or XR-1000 models /4" Drag pipes 40 long $ /4" Straight drags 34" long $ /4" Goose Cut drags 34" long $ Mounting Bracket for 1 3/4" set $ Baffles fits 1 3/4"-diameter pipes $ Santee 1 3/4" Upswept Drag Pipes for FX Models These drag pipe sets are reminiscent of the chopper pipes from the 60s. Available two ways; Kick-Out style with a slick turned out look, or for real nostalgia choose the Trim-Tail system. Chrome mounting bracket and hardware is included. Dyno Power pipes feature smooth, even mandrel bends and fully-polished high-quality chrome-plating Kick-Out Drags $ TrimTail Drags $ Santee 1 3/4" Slash Cut Drag Pipes Santee Drag pipes are made of 16 gauge steel with hidden channel mounts that connect to your stock brackets or to supplied brackets unless otherwise noted. For Softail Models For Softail models $ For Softail models from $ Baffles fits 1 3/4"-diameter pipes $3.99 Note: 1990 thru 1994 Fat Boy and FLSTN models with shotgun exhausts require mounting bracket CC #18499 except for CC #11122 which includes one. For 4-Speed FX Models from Slash-Cut Drags $ Baffles fits 1 3/4"-diameter pipes $3.99 For Sportster Models Front pipe mount includes integral brake pedal stop similar to stock. Pipes will not fit models with Original Equipment forward controls Slash-Cut Drags $ Chrome front heat shield $ Chrome rear heat shield $ Baffles fits 1 3/4"-diameter pipes $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.

15 Exhaust End Caps by Custom Chrome To complement the ever popular 3.5 Rinehart mufflers we ve come up with some stylish replacement end caps. Whether yours are scratched, faded or you just want to change the look of your mufflers we have something for you. We even have a raw slug that you can powder coat, anodize, machine or do whatever you like to. End caps are sold each and have a chrome or black Teflon coating End cap Vortex chrome $ End cap Vortex black $ End cap Afterburner $ End cap Smoothie raw $ End cap Bullet chrome $ End cap Bullet black $ End cap Thruster chrome $ End cap Thruster black $69.99 Santee 2-Into-1 Headpipes for Softail Models Modeled after the early-style 2-into-1 exhaust systems, the two separate front and rear 1 3/4" headers are joined with a tooled slip-fit connection for a snug, leak-resistant seal that requires no external clamping. This pipe set allows you to build a custom system and includes a muffler clamp and mounting bracket. Provides generous ground clearance and won t interfere with Original Equipment floorboards, controls, footpegs or saddlebags into-1 headpipe set $

16 Santee Shotgun Pipe Builders Kit For Pandemonium & Jammer 88 Shovelheads or Pan/ Shovelheads with STD Cylinder Heads This is the perfect starting point for those one off Shotgun pipes you are looking to build. They are designed to work perfectly with our Pandemonium, Jammer 88 Shovelhead or any Panhead/Shovelhead with STD cylinder heads. This kit comes complete with a front & rear pipe with flanges pre-welded on and 2 channel mounts that can be welded on where-ever you need them. The pipes come in a raw steel so you can cut and weld them up and chrome, paint, or wrap them up however you like. Made in the U.S.A Santee Shotgun pipe builders kit $ Universal Perforated Exhaust Heat Shield Chrome-plated 11"-long universal heat shield fits a range of pipe and muffler sizes from 1 3/4" to 3". Ideal for Shotgun or upswept exhaust systems Sold each $39.99 Santee Fishtail Straight Pipes A set of unmuffled, 30"-long Fishtail straight pipes with 1 3/4"-inlets Fishtail straight pipes, Sold in pairs $ Chrome Exhaust Heat Shield 7" chrome-plated heat shield for all 1 3/4" diameter exhaust pipes. A unique integrated clamp mounts this shield for a neat custom appearance Chrome heat shield (repl. OEM T) $ Chrome drilled heat shield (repl. OEM T) $ Black 7 heat shield (repl. OEM T) $17.99 Santee Baffled Fishtail Extensions These 36"-long universal Fishtail extensions can be easily added to existing headpipes. Sold each /4"-inlet $ Universal Exhaust Pipe Heat Shield 7"-long universal heat shield fits a range of pipe sizes from 1 1/2" to 2". Ideal for protection on Shotgun or upswept systems Sold each $43.95 Classic Fishtail Muffler Show-chrome muffler with an antique-style tip. This clean, bracketless muffler allows left or right side mounting and has a 1 3/4"-inlet, and is 35"-long Sold each $79.99 Floorboard Adaptor Required for use when installing some Santee exhaust systems on 4-speed FL models equipped with floorboards. When properly installed, it provides additional clearance between the front pipe and the right floorboard Floorboard adaptor, Sold each $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.

17 Santee Designer Series Bonanza Highway Bar by Fred Kodlin This is the latest from Fred Kodlin and the Murder Cycles crew. These highway bars are the perfect match to the Bonanza handlebar series. The Highway Bars feature 1 1/4 steel tubing with built-in peg mounts so there is no need for those bulky clamps. They are available in a chrome-plated or black powdercoated finish. Chrome Bonanza highway bar for Touring models (except FLTR Road Glide models), chrome $ Bonanza highway bar for Touring models (except FLTR Road Glide models), chrome $ Black Bonanza highway bar for Touring models (except FLTR Road Glide models), black $ Bonanza highway bar for Touring models (except FLTR Road Glide models), black $ Optional Footpeg Clevises (required if you want to run highway pegs) Chrome 3/8-20 clevis, sold in pairs $ Black 3/8-20 clevis, sold in pairs $19.99 Note: Not for use with factory lowered (FLHX, FLHRS) and aftermarket lowered bikes. 17

18 95039 Santee Low Glide Frames and Swingarms If you re after a stock look that s as easy to build as bolting on parts, choose our Low Glide frame. If you re after a more radical custom look with one of those really-wide rear tires, pick one of our Low Glide Custom frames. Low Glide Stock Replacement Frame Stock-style frame kit accepts most Original Equipment or aftermarket accessories, with brackets and tabs for the coil, belt guard, late rear brake caliper and master cylinder, flatside gas tanks, oil tank, shock absorbers and fender struts. There is also a mounting loop provided on the right front downtube for oil filter housings. Everything bolts in place like on stock frames. Frames have 1"-diameter 1020 mild steel tubing with a stock 32 rake, no stretch, and the swingarm is stock width with clearance for belt or chain drive. The steering head uses stock bearings and cups. With correct inner and outer primaries and transmission mounting plate, 4-speed, 5-speed or 6-speed transmissions can be installed. Include rear axle and swingarm pivot shaft with bearings Frame and swingarm kit $1, Replacement frame ONLY (no swingarm) $1, Swingarm pivot bearing and retaining clip for all Softail models from (repl. OEM 9076) $ /4"-offset driveline offset kit (permits the use of a 1/2"-wider rear tire) $79.99 Accessories for Low Glide Frames Here are some items to finish a hot custom bike. Bearings and Cups Chrome bearing cups (pair) $ Timken bearing (sold each) $9.99 Flatside Gas Tanks gallon $ gallon $ Gas tank mounting kit $ Santee 4-Speed Rigid Frames These Classic Santee frames are the perfect start to any Old School build. Available with the classic look of either Wishbone or Straight Leg style downtubes that Santee is known for. Frames accept any Big Twin engine except Twin Cam (including Strokers and Evolution motors). Frames are set-up for disc brakes and include rear axle kit. Straight Leg Frames º rake, 0" downtube stretch, 0" backbone stretch WITHOUT tank mounts $ Wishbone Frames º rake, 0" downtube stretch, 0" backbone stretch WITHOUT tank mounts $ Replacement Axle Kit Replacement axle for Santee 4-speed rigid frames......$ Optional Oil Tanks Custom 3.5 qt. oil tank with push-on hose barbs $ Custom 3.5 qt. oil tank with push-on hose barbs and spin-on filter $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.

19 Weld-On Hardtail for Big Twins A quick and easy method of converting swingarm frames to rigid. It has the same wheelbase and ride height as stock. Oil tanks for this hardtail include CC #s 12601, 12571, 12603, 12600, 12581, and CC #12554 chain guard should also be used Fits hydraulic drum brake 4-speed swingarm frames $ Weld-On Hardtail for Sportster Models Fits early Sportster models with mechanical rear brakes. It forms an almost-perfect straight line with the frame backbone, and lengthens the motorcycle by 4" and lowers it 4". The oil tank to use with this frame is a CC # Fits Sportster models $ Santee Rigid Frames for Sportster Models Designed and available to fit all Sportster engines from 57-03, these frames have a stock width rear section that will accept a 130mm rear tire with a standard 1 1/8 final belt or chain. Made in the U.S.A rake, 0 Backbone, 0 downtube stretch rigid frame for XL models without tank mounts $ rake, 0 Backbone, 0 downtube stretch rigid frame for XL models without tank mounts $ rake, 0 Backbone, 0 downtube stretch rigid frame for XL models without tank mounts $ Oil Tanks for XL Rigid Frames by Paughco Bolt-On Hardtail for Sportster Models A bolt-on unit lengthens the wheelbase by 4 1/2" and lowers the bike 4". The oil tank to use with this frame is a CC # For Sportster models with mechanical rear brakes $ This oil tank is for use with the Swedish & Chopper style rigid Sportster frames manufactured by Paughco. Drain plug sold separately. Made in USA by Paughco Oil tank for use w/paughco XL rigid frames $ w w w.cu sto m c h ro m e.co m Oil tank drain plug $

20 20 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.

21 General Warnings Motorcycle riding is a dangerous activity. The only way to be sure to avoid injury is not to ride! Even if you use the finest and best-maintained equipment, wear a helmet and protective clothing, and take all possible precautions, it is not possible to avoid every risk. Motorcycle accidents frequently result in serious injury, including death. Please do not operate a motorcycle or other motor vehicle when you are tired or under the influence of alcohol or drugs, or when your perception is impaired for any other reason. At all times, please wear a helmet, ride carefully and within posted speed limits, and obey all other traffic regulations and instructions from law enforcement personnel. Custom Chrome, sells aftermarket motorcycle parts for Harley-Davidson and other brands. If you do not have the necessary experience and skill, please have a qualified mechanic install any new or replacement part on your motorcycle. The failure to install properly and test any new or replacement component could adversely affect your motorcycle s operation and result in an accident, including a fatal accident. Federal and state laws and regulations impose restrictions on modifying the engine, ignition, exhaust and other components of a motorcycle intended for on-road use. In addition, these laws and regulations impose requirements on windshields, brake components, lighting, and other equipment on your motorcycle. Accordingly, certain parts in this catalog are for competition or display purposes only. In general, those parts are indicated by a Competition mark: a checkered flag in a yellow oval. If you are a retail customer, you are responsible to know the laws and regulations that govern the modification of your motorcycle. Custom Chrome is not responsible if you modify your motorcycle or any component in violation of law. If you have any questions regarding a particular component, please consult your dealer or a qualified motorcycle mechanic. The following is additional information relating to components for sale in various sections of this catalog. This information is not exclusive if you have any questions regarding the installation or use of any component, please contact your dealer, a qualified mechanic, or Custom Chrome s customer service department. FOOT AND HAND CONTROLS Warning: Components with sharpened ends could cause serious injury in case of an accident. CCI recommends the use of these parts for display purposes only. Master cylinder: These brake components have not been tested for compliance with federal and state law. Because the brakes are the most important safety system on your motorcycle, we recommend that you have your brakes professionally installed and tested and regularly inspected and maintained, to ensure that they comply with Federal Motor Vehicle Safety Standard 122 and operate properly. HANDLEBARS AND CONTROLS Warning: The improper installation of handlebars or the other components in this section could adversely affect your ability to handle your motorcycle, resulting in a potentially serious or fatal accident. Please follow all installation instructions included with your accessory. If the instructions are unclear, please consult your dealer or a qualified mechanic for assistance. Handlebars: Some states regulate handlebar height. Please check with your Highway Patrol or Department of Motor Vehicles or with your local dealer to ensure that your choice of handlebar is legal in your state. Handlebar Grips: Components with sharpened ends could cause serious injury in case of an accident. CCI recommends the use of these parts for display purposes only. Mirrors: Federal Motor Vehicle Safety Standard # 111 specifies requirements relating to the size, shape, and installation of rearview mirrors. It is a violation of federal law and the law of many states to install non-compliant mirrors on motorcycles intended for on-road use. If you have any question whether a mirror advertised in this Section complies with FMVSS 111, please consult your dealer, a qualified mechanic, or CCI Customer Service. LIGHTING AND ELECTRICAL Warning: Federal Motor Vehicle Safety Standard #108 specifies requirements relating to lamps, reflective devices, turn signals, and associated equipment. It is a violation of federal law and the law of many states to install noncompliant lighting or reflective equipment on motorcycles intended for on-road use. If you have any question whether any equipment advertised in this Section complies with FMVSS 108, please consult your dealer, a qualified mechanic, or CCI Customer Service. Kodlin Elypse, Kodlin Mini-Square, and Wave Headlights: These headlights do not comply with FMVSS 108 and are for off-road, competition, or display purposes only. Taillights and License Plate Lights: FMVSS 108 governs the size and installation of taillights, license plate lights and holders, and related equipment. It is a violation of federal law and the law of many states to install non-compliant equipment on motorcycles intended for on-road use. If you have any question whether any equipment advertised in this Section complies with FMVSS 108, please consult your dealer, a qualified mechanic, or CCI Customer Service. Beehive and LED Snake Eye Taillights: These taillights do not comply with federal and state law and are for off-road, competition, or display purposes only. Rear Turn Signal Mounting Bars: These mounting bars may violate turn signal spacing requirements in FMVSS 108 and thus should be used only on off-road, competition, or display motorcycles. ELECTRICAL Warning: The modification of ignition timing, the installation of programmable ignition systems, or other adjustments to your motorcycle s electrical system that have the effect of increasing horsepower may violate federal law or the law of your state. Before modifying your motorcycle s electrical system or installing any aftermarket electrical component, please check with your dealer to insure that the modification or installation is legal in your state. Dynatec components: Certain of these components are not legal for sale in California and certain other states. EXHAUST AND INTAKE Warning: Federal law and the law of most states govern motorcycle exhaust emissions and noise. In many states, it is a violation of law to install an after market exhaust system that results in emissions or noise at levels greater than produced by your motorcycle s original equipment. If you are uncertain whether the installation of any after-market exhaust system is legal in your state, please consult your dealer. Straight pipes: The use of straight pipes without mufflers is illegal on motorcycles intended for on-road use. These pipes are for competition or display purposes only. O² sensor port: The installation of this or any other oxygen sensor port does not ensure that your motorcycle will remain in compliance with federal and state emission control laws. Diverter valves: The sale and installation of diverter valves is illegal in California and certain other states. Please check with your dealer before installing a diverter valve on your motorcycle. FRAMES Chassis Stabilizer: This chassis stabilizer has not been tested on all models of motorcycle and may not perform as desired on some models, which could result in a serious, potentially fatal accident. Test your motorcycle for handling and stability after installation. If you have any questions or concerns, contact your dealer or a qualified mechanic. Highway Bars: These bars are for cosmetic use only and will not protect your legs or lower body in the event of a fall, accident, or collision with an automobile or other object. Kickstands: If your kickstand does not retract when it contacts the ground as you ride off, it could adversely affect your ability to handle your motorcycle, which could result in a serious, potentially fatal accident. Ensure that your kickstand is properly installed. If you have any questions or concerns, contact your dealer or a qualified mechanic. Never ride with a kickstand that has a missing retraction spring. COPYRIGHT BY CUSTOM CHROME - A DIVISION OF DAE-IL USA, INC. ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION MAY BE REPRODUCED, STORED IN A RETRIEVAL SYSTEM OR TRANSMITTED IN ANY FORM OR BY ANY MEANS; ELECTRONIC, MECHANICAL, PHOTOCOPYING, RECORDING, OR OTHERWISE WITHOUT PRIOR WRITTEN PERMISSION OF THE PUBLISHER. Any add-on or modified emissions-related parts contained in this brochure that are subject to anti-tampering laws may or may not have been evaluated and/or exempted by CARB. As a distributor, Custom Chrome makes no representation or warranty with respect to whether the emissions-related parts in this brochure are legal for sale, installation or use in any state unless the part is installed in a vehicle used only for closed-course competition. Consult with the manufacturer as to any such exemptions before purchasing any add-on or modified emissions-related parts for non-competition use in California or elsewhere. 21

22 World s Finest Products For Harley-Davidsons Service Maintenance Customization Repair Performance Serene Drive Suite 150 Morgan Hill, CA Printed in USA 22 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.