Bushings & Hardware 233 Clutch Release Components 230 Kicker Covers & Parts 232. Mounting Plates 231 Shifter Components 230

Transcription

1 Bushings & Hardware 233 Clutch Release Components 230 Kicker Covers & Parts 232 Lock Tabs 234 Mounting Plates 231 Shifter Components 230

2 TOOLS & FOOT PRIMARY & ENGINE & SHEET GAS & OIL WHEELS FRAMES & HANDLEBARS SPRINGERS TRIKE GENERAL EXHAUST TRANSMISSION CONTROLS DRIVETRAIN ELECTRICAL METAL TANKS & BRAKES ACCESSORIES LIGHTING & RISERS & FORKS KITS Shifter & Clutch Release Components F Ratchet Top Dust Cover Parts And Shift Rod Chrome dust shield for 1952 early 1979 FL model ratchet shift covers (OEM ) $ Chrome dust shield for 1974 early 1979 FX model ratchet shift covers (OEM ) $ Shifter shaft lever for 1952 early speed ratchet lid (OEM ) $ x 1/2" screws for shifter shaft lever (set of 3) OEM 1767W $ F Complete shift rod with clevis and shoulder bolt (OEM s A, , ) $ Clevis pin hardware kit with cotter pin for shift rod clevis ends (OEM ) $ Visit us on the Internet at A or us at info@paughco.com 219H G Mainshaft Support And Clutch Release Arms 224 Transmission shaft support. Prevents excessive wear on the mainshaft bearing when using a 1970 up engine in a rigid frame without the stock aluminum inner primary $ A Support shaft bearing for Paughco #224 transmission support $ G Early clutch release arm for mousetrap or suicide clutch rod on 1941 up Big Twins, but hand shift only from (OEM s and ) $ H Clutch release arm for mousetrap eliminator custom modification. Fits Big Twins to early 1978 with stock or custom frames and a wrap-around oil tank $74.95

3 A A 218AX E218AS 218AW E218AX Transmission Mounting Plates & Adjusters E218AW Transmission Mounting Plates And Adjusters A wide selection of mounting plates that will accommodate most Big Twins with four or five-speed transmissions from stock Knuckleheads to modern customs. 218 For 4-speed transmissions in Paughco standard width swingarm and rigid frames (not Easyride frames), or stock HD swingarm and rigid frames (OEM s and ) $97.95 B218 Same as Paughco #218 but gloss black (not shown) $ For Paughco Easyride or stock Softail frames when using 4-speed transmissions $ For Paughco wide Easyride frames when using 4-speed transmissions (1/2" offset) $ A For Paughco wide Easyride frames when using 4-speed transmissions (1" offset) $ E218X For Paughco extra-wide Easyride frames when using 4-speed transmissions (1½" offset) $ For Paughco wide rigid frames when using 4-speed transmissions (1/2" offset) $ A For Paughco wide rigid frames when using 4-speed transmissions (1" offset) $ For Paughco extra-wide rigid frames when using 4-speed transmissions (1½" offset) $ A For Paughco rigid frames when using Softail 5-speed transmissions $ AW For Paughco wide rigid frames when using 5-speed Softail transmissions (1/2" offset) $ AW-1 For Paughco wide rigid frames when using 5-speed Softail transmissions (1" offset) not shown $ AX For Paughco extra-wide rigid frames when using 5-speed Softail transmissions (1½" offset) $72.95 E218AS For Paughco Easyride or stock Softail frames when using 5-speed transmissions (OEM ) $72.95 E218AW For Paughco wide Easyride frames when using 5-speed Softail transmissions (1/2" offset) $72.95 E218AW-1 For Paughco wide Easyride frames when using 5-speed Softail transmissions (1" offset) not shown $72.95 E218AX For Paughco extra-wide Easyride frames when using 5-speed Softail transmissions (1½" offset) $ Transmission adjuster for stock or custom $ A Bracket for rear of early model transmission plate (OEM ) $18.95 B217A Same as Paughco #217A but gloss black $ B Transmission adjusting bolt $ A B217A 217B To order these parts, call us at or toll free at TOOLS & EXHAUST TRANSMISSION FOOT PRIMARY & ENGINE & SHEET GAS & OIL WHEELS FRAMES & LIGHTING HANDLEBARS SPRINGERS TRIKE GENERAL CONTROLS DRIVETRAIN ELECTRICAL METAL TANKS & BRAKES ACCESSORIES & RISERS & FORKS KITS

4 TOOLS & FOOT PRIMARY & ENGINE & SHEET GAS & OIL WHEELS FRAMES & HANDLEBARS SPRINGERS TRIKE GENERAL EXHAUST TRANSMISSION CONTROLS DRIVETRAIN ELECTRICAL METAL TANKS & BRAKES ACCESSORIES LIGHTING & RISERS & FORKS KITS Kick Start Covers & Parts 221 Kick Starter Parts And Accessories For Big Twins And Sportsters A nice selection of these important components for use as replacement parts. KICKER COVERS The heavily-reinforced bushing area and super-strong 356T6 aluminum construction, solves the problem of broken kick starter covers. Fits all OHV and Flathead Big Twins. Natural finish ONLY. 221 Finned $ Smooth (OEM A) $ ACCESSORIES AND HARDWARE 219 Kick starter shaft for Big Twins (OEM B) $ Highly-polished late kick arm with offset to clear exhaust pipes (OEM ) $ A Round solid kick pedal $ B Kick starter lever return spring for Big Twins (OEM ) $ B1 Kick start return spring stud for Big Twins (OEM ) $ C Kick start lever return spring for K-models and Sportsters (OEM ) $ C1 Kick start return stud for K-models and Sportsters (OEM ) $ D Hardware kit for kick pedals (OEM s , and 4336W) $ A Chrome cap nut-style kicker cover plug for all OHV 4-speed Big Twin from (can also be used as a timing hole plug) $ B Kicker cover cap nuts for Big Twins (set of 9) $ F Original-style kicker cover plug for all OHV 4-speed Big Twins from $ Kicker cover bushing kit for OHV and Flathead Big Twins (OEM s and 11101) $ Visit us on the Internet at B or us at info@paughco.com 220B1 220C1 220C A A 220D 220B 221F

5 Transmission Bushings & Hardware STF B A To order these parts, call us at or toll free at Transmission Bushings 223 Bushing kit for all HD and Paughco kicker covers (OEM ) $ Countershaft bushing (low or reverse) for Big Twins (OEM ) $ Countershaft low and second gear bushing for Big Twins (OEM ) $ Second gear mainshaft bushing for Big Twins (OEM ) $ Ratchet gear bushing for 1957 early 1973 Sportsters (OEM A) $ Kicker shaft bushings for Sportsters (OEM A) sold in pairs $27.95 Ratchet Top Mounting Hardware 50 Ratchet top screw kit for 1941 early 1979 Big Twins (set of 12) OEM s 2329, 1765W and $ A Ratchet top vent screws for 1936 early 1979 Big Twins (pack of 10) OEM $ B 1/4"-24 x 2" ratchet top screws for 1959 early 1979 Big Twins (sold in pairs) OEM 1765W $12.95 STF001B Old-Stf Brass Kick Pedals These solid brass kicker pedals are made by Old-Stf Cycles and offered thru Paughco. The solid brass cast pedal was specially designed with the Kick lettering for unique styling and an added cool look that no one else has. The pedal shafts are CNC-machined from solid bar stock, and include a mounting bolt and hardware. Fit 1936 up Big Twins and Sportsters. STF001 Natural brass finish $ STF001B Black painted $ TOOLS & EXHAUST TRANSMISSION FOOT PRIMARY & ENGINE & SHEET GAS & OIL WHEELS FRAMES & LIGHTING HANDLEBARS SPRINGERS TRIKE GENERAL CONTROLS DRIVETRAIN ELECTRICAL METAL TANKS & BRAKES ACCESSORIES & RISERS & FORKS KITS

6 TOOLS & FOOT PRIMARY & ENGINE & SHEET GAS & OIL WHEELS FRAMES & HANDLEBARS SPRINGERS TRIKE GENERAL EXHAUST TRANSMISSION CONTROLS DRIVETRAIN ELECTRICAL METAL TANKS & BRAKES ACCESSORIES LIGHTING & RISERS & FORKS KITS Lock Tabs Lock Tabs A large selection of lock tabs for a wide variety of applications. CLUTCH LOCK TAB Fits Sportsters Pack of 10 $27.95 COUNTERSHAFT LOCK TAB Fits speed Big Twins Pack of 10 $27.95 STARTER SHAFT BOLT LOCK TAB Fits 1989 Big Twins ONLY Pack of 10 $27.95 TRANSMISSION PLUNGER BODY BOLT LOCK TAB Fits Big Twins Pack of 10 $27.95 INNER PRIMARY LOCK TAB Fits 1985 up Big Twins Pack of 10 $18.95 STARTER LOCK TAB Fits speed Big Twins Pack of 10 $27.95 CAM FOLLOWER LOCK TAB Fits 1952 early 1979 Big Twins Pack of 10 $27.95 SHIFTER FORK LOCK TAB Fits speed Big Twins Pack of 10 $27.95 MAINSHAFT BEARING LOCK TAB Fits speed Big Twins Pack of 10 $27.95 MAINSHAFT SPROCKET NUT LOCKWASHER Fits W and G models Pack of 10 $18.95 CLUTCH HUB LOCK NUT TAB Fits 1941 early 1984 Big Twins Pack of 10 $ Visit us on the Internet at or us at info@paughco.com