Eye-bolt for front chain adjustment, Pre-49 singles, twins, 1958-on CS singles

Size: px

Start display at page:

Download "Eye-bolt for front chain adjustment, Pre-49 singles, twins, 1958-on CS singles"

Eric Pitts
6 years ago
Views:

1 Part No. AJS & MATCHLESS GEARBOX & CLUTCH - NEW PARTS Price (20% VAT) Price (excl VAT) Tool for adjusting clutch spring nuts (heavier duty than spanner) Spanner, single end, dynamo chain and clutch spring adjustment RTK Eye-bolt for front chain adjustment, Pre-49 singles, twins, 1958-on CS singles (x2) Eye-bolt for front chain adjustment, singles Bolt, for front chain adjustment, 1956 singles Bolt, for front chain adjustment, 1956 twins Bolt for front chain adjustment, 1957-on twins Bolt, for front chain adjustment, 1957-on road singles Crosshead, for front chain adjuster eye-bolt, Pre-56 all models, 1958-on CS singles only (x2) Crosshead, for front chain adjuster bolt, all models, 1958-on road models only Nut, gearbox adjusting bolt, 1961-on CS singles * Burman CP Gearbox 179-X-7 CP 16 teeth gearbox sprocket CP 17 teeth gearbox sprocket X-2 CP 18 teeth gearbox sprocket CP 19 teeth gearbox sprocket X Nut fixing gearbox sprocket to main driving gear X-1 Washer, lock, gearbox sprocket nut X-8 Spacing collar, gearbox sprocket Bolt, gearbox top fixing, with nut & washer, all models except 350cc pre-engine no G9-G Spacer, gearbox top & bottom mountings, inside engine plates left & right, all models G9-G61 with CP gearbox except 350cc before engine no Spacer, gearbox top fixing bolt, outside right, 1948-on. Use for STD (STD632) Stud, gearbox bottom fixing, 350cc before engine no. 8000, with nuts /NOS Stud, gearbox bottom fixing, 350cc before engine no. 8000, 'New Old Stock' Stud, gearbox bottom fixing, all models (except 350cc before engine no ); 1951 twins only. Also gearbox top fixing, 350cc before engine no. 8000, with nuts Stud, gearbox bottom fixing, 1951 all singles, with nuts X-1 Nut, for ¼" gearbox and kick-starter case studs X-1 Nut, for 5/16" gearbox and kick-starter case studs X CP gearbox filler cap X-1 Washer, fibre, for gearbox shell drain plug C/PW Gasket for Burman CP kickstarter case, Pre-War models with external (exposed) clutch operating mechanism 4-1-C/PW Gasket for Burman CP kickstarter case cover, Pre-War models with external (exposed) clutch operating mechanism 2-1C Gasket for Burman CP kickstarter case C-2 Gasket for Burman CP kickstarter case cover X CP ball bearing, for driving gear on mainshaft C Felt washer for driving gear ball bearing, pre-1948 grease-type CP gearbox (112-C-2) Oil seal, main driving gear bearing, for oil-filled gearboxes - no longer available, use B seal with housing 68-X CP ball bearing, for mainshaft X Rollers for camshaft (set of 12) CO-66-1 Main spring, for spring box (large spring) CO-67-1 Pawl spring, for spring box (small spring) CO-97-1 Gear position indicator, fixed CO-97-2 Gear position indicator, moving X Nut, retaining moving gear indicator, pre X-1 Plunger, clutch operating X-1 Ball, steel, for clutch thrust rod X-4 28-X-56 Rod, thrust, for clutch, 9 7/8" long (four plate clutch)

2 28-X-5 Rod, thrust, for clutch, 10 3/16" long (five plate clutch) X X-2 Roller race for clutch bearing chainwheel X Rollers for chainwheel bearing, (set of 24) X-2 Washer for chainwheel bearing, thin X-3 Washer for chainwheel bearing, thick X-16 Centre for five plate clutch, 4-stud type (69-X) Nut retaining clutch centre - use B nut X Washer, plain, for clutch centre retaining nut X-3 Washer, lock, for clutch centre retaining nut. Replaces 212-X spring washer X-2 CP clutch plate, friction, bonded, (1951 as B52) X CP clutch plate, plain steel, thin (0.040"), all models & cc only ( as B52) 6-X-5 CP clutch plate, plain steel thick (0.060"), cc only (1951 as B52) X-3 Clutch spring X-2 Cup for clutch spring X-3 Adjusting nut for clutch spring X-11 Stud for clutch spring, 4-plate clutch X-12 Stud for clutch spring, 5-plate clutch CO-63-3 Bolt clamping gear lever with nut & spring washer X-1 OS-52-1 CO-82-2 Burman gear lever rubber X Pinion, ratchet, kickstarter X Spring, kickstarter ratchet pinion X-4 Spindle for kickstarter quadrant (pre-1949) Burman kickstart rubber, enclosed end X X-1 CP non-folding kickstart lever, with rubber X-1 Bolt fixing kickstarter X X X-1 Nut for kickstarter fixing bolt X Nut, domed, folding kickstart pedal X Washer, dished spring, folding kickstart pedal nut X Stop, rubber & metal sleeve, for kickstarter quadrant * Burman B52 Gearbox Bolt, gearbox top fixing, with nut & washer, Spacer, gearbox top fixing bolt, outside right, Bolt, gearbox top fixing, with nut & washers, Stud, gearbox bottom fixing, with nuts Filler cap for B52 gearbox Washer, fibre, for gearbox shell drain plug Washer, fibre, for oil level plug Washer, fibre, for under head of outer cover screws Oil level plug for outer cover /4/5/6/7 Screws for B52 outer cover (set) G-5-3 Gasket for Burman B52 inner gearbox cover G-5-4 Gasket for Burman B52 outer gearbox cover B52 ball bearing, for driving gear on mainshaft B52 ball bearing, for mainshaft B52 oil seal for driving gear bearing Housing, for driving gear bearing oil seal Bush, for mainshaft driving gear Bush, for mainshaft third and layshaft second gears B52 oil seal in cover bush for kickstarter spindle Oil seal in cover bush for cam spindle B52 oil seal in cover bush for control quadrant spindle G-31-1 B52 16 teeth gearbox sprocket B52 17 teeth gearbox sprocket

3 B52 18 teeth gearbox sprocket B52 19 teeth gearbox sprocket Nut fixing gearbox sprocket to main driving gear Washer, lock, gearbox sprocket nut Spacing collar, gearbox sprocket Water deflector, fits under gearbox sprocket nut. Covers large hole in chaincase, preventing ingress of water and mud. Originally fitted to competition models with B52 gearbox but also suitable for road models with B Pin, cotter, for selector spindle pegs G-42-3 Plunger locating cam assembly Spring, for cam assembly locating plunger Spring, secondary, for control quadrant G-47-1 Gear indicator, correct round type Spring under gear indicator Nut retaining gear indicator Bolt clamping gear lever with nut & spring washer / G-48-1 Burman gear lever rubber Roller race for clutch bearing chainwheel Rollers for chainwheel bearing, (set of 24) Washer for chainwheel bearing, thin Washer for chainwheel bearing, thick Washer, plain, for clutch centre retaining nut Washer, lock, for clutch centre retaining nut Nut retaining clutch centre G-32-2 G-33-3 Cam-plates, fixed & moving, actuating clutch, pair Rod, thrust, for clutch, 9 7/8" long (four plate clutch) Rod, thrust, 10 3/16" long (five plate clutch) Ball, steel, 5/16", for cam-plates & clutch thrust rod Thrust dowel with washer & split pin, passes through both cam-plates Spring for cam plate dowel G B52 clutch plate, friction, bonded G-40-6 G-39-1 B52 clutch plate, plain steel, thin (0.040"), cc only G-39-4 B52 clutch plate, plain steel, thick (0.060"), cc only & all models Thrust cup/adjuster for pressure plate Nut, lock, for pressure plate thrust cup/adjuster Clutch spring G-42-2 Cup for clutch spring Adjusting nut for clutch spring Stud for clutch spring, 4-plate clutch Stud for clutch spring, 5-plate clutch Spring, kickstarter ratchet pinion G-20-1 Pinion, ratchet, kickstarter Nut retaining ratchet driver to mainshaft G-23-1 Spindle for kickstarter quadrant G-45-3 Burman kickstart rubber, enclosed end G-43-2 G-45-1 B52 non-folding kickstart lever, with rubber /11/ Bolt fixing kickstarter Nut, domed, folding kickstart pedal Washer, dished spring, folding kickstart pedal nut * AMC Gearbox Bolt, gearbox top fixing, with nut & washers Bolt, gearbox top fixing, 1958-on CS singles Washer, gearbox top fixing bolt Spacer, gearbox top fixing bolt, left & right, 1958-on CS singles Stud, gearbox bottom fixing, with nuts Stud, gearbox bottom fixing, 750cc models except P11, with nuts & washers

4 Gasket for inner kick-start case Gasket for outer kick-start cover AMC gearbox inspection cover, plain Screw for inspection cover Gasket for gearbox inspection cover Drain plug, in shell Dowel locating kick-start case and kick-start cover (2 for inner, 2 for outer) Stud, in shell, for kick-start case Stud in shell, for kick-start case Screw, securing kick-start cover A Screw, securing kick-start cover (NB turned to match original cheesehead dimensions exactly) Gear, first, layshaft, 28 teeth, with bush Bush for main driving gear (2 fitted) Bush for mainshaft second gear Bush for layshaft third gear Bush for layshaft first gear Ball bearing for main driving gear Ball bearing for mainshaft in kickstart case Ball bearing for layshaft in shell Bush, in shell, for camplate spindle and quadrant spindle Oil seal for main gear bearing Oil seal, O-ring for camplate spindle and quadrant assembly Q Oil seal, for camplate spindle and quadrant assembly, improved design Bush, in kick-start case (inner), for footchange spindle Bush, in kick-start case cover, for kick-start spindle (outer), type for M- not MA Bush, in kick-start case cover, for kick-start spindle (outer), 1962-on type for MA- not M Bush, in kick-start case (inner), for kick-start spindle, type for M- not MA Bush, in kick-start case (inner), for kick-start spindle, 1962-on type for MA- not M Bush, in kick-start case cover (inner), for footchange spindle Oil seal, O-ring for ratchet spindle Oil seal, O-ring for footchange spindle Q Oil seal, for footchange spindle, improved design (no need for modification to the cover) Oil seal, O-ring for kickstarter Q Oil seal, for kickstarter, improved design (no need for modification to the cover) AMC 14 teeth gearbox sprocket. NB does not have threaded holes for plate, not enough space in outer face. AMC 15 teeth gearbox sprocket AMC 16 teeth gearbox sprocket AMC 17 teeth gearbox sprocket AMC 18 teeth gearbox sprocket AMC 19 teeth gearbox sprocket Nut fixing gearbox sprocket Plate locking gearbox sprocket nut Spacer for gearbox sprocket Washer, plain, for camplate or spindle Screw for camplate or spindle Shaft, for selector fork Gear, ratchet assembly. Comes with spindle Roller for knuckle pin Pawl spring for gear change Circlip, knuckle pin Carrier, pawl assembly. Includes carrier & pin Pin, for pawl carrier Pawl, footchange Circlip, footchange pawl

5 Spindle for ratchet AMC gear change return spring, 1962-on. Improved version of (040075) Washer, gear change return spring Plate, stop, gear change Screw, gear change stop plate B AMC gear lever pedal, British-made (supplied without bolt or rubber). Use for AMC gear lever rubber Bolt clamping gear lever with nut & spring washer Gear indicator Bolt for gear indicator. Also use for oil level plug Plunger for camplate Spring for camplate plunger. Also use for (040045) Housing/bush for camplate plunger AMC folding kickstart lever, with bolt & rubber, superior quality British-made Nut, domed, fixing folding kickstart pedal to crank Washer, dished spring/belleville, kickstart pedal nut Bolt fixing kickstarter AMC kickstart rubber, open end Kickstart axle, with bush. Suits both early & late return springs Bush for kickstart axle. Also suitable for Pawl for kickstart axle Pin, kickstart axle pawl Spring, kickstart axle pawl Plunger, kickstart axle pawl Rivet, for kickstart cam or stop Stop, for kickstart axle Cam, for kickstart axle AMC kickstart return spring, type for M- not MA AMC kickstart return spring, 1962-on type for MA- not M Nut for mainshaft, kickstart end Clutch sprocket, pre-1960 type with bonded friction material, suitable for plain steel back plate only Clutch sprocket, solid type, suitable for 1959-on friction back plate only Clutch back plate, bonded type, suitable for 1959-on sprocket only Race plate for clutch Rollers for clutch (set of 15) Cage for rollers /7 AMC clutch shock absorber rubbers, set: 3 large, 3 small /7 AMC clutch shock absorber rubbers, set: 3 large, 3 small. British-made, more supple & much better fit than cheaper version Screw, shock absorber cover plate Nut retaining clutch Lock washer for clutch retaining nut AMC clutch plate, friction, bonded, double side, external lugs (pre-1960) AMC clutch plate, friction, bonded, double side, internal lugs (1959-on) AMC clutch plate, friction, bonded, single side, internal lugs (1959-on) AMC clutch plate, plain, internal lugs (pre-1960) AMC clutch plate, plain, external lugs (1959-on) (040354) Centre, shock absorber. Improved version of , suitable for all Heavyweight models AMC clutch centre Pressure plate, bare B Pressure plate, billet, bare Adjuster for clutch in pressure plate Nut for clutch adjuster AMC nut for clutch spring adjustment (043441) AMC clutch spring stud

6 AMC clutch spring AMC clutch spring for 5-plate clutch Cup, clutch spring Nut fixing clutch stud to clutch centre Rod, clutch operating Clutch operating lever Body, clutch operating Lock ring for clutch body Tool removing clutch lock ring Ball, clutch operating Roller, clutch operating Sleeve, clutch operating roller Screw, clutch operating roller Tool locking clutch. Has handle and internal & external lugs for engaging with centre & basket. Fits all AMC clutches (similar to Fig.51 in Workshop Manual) AMC clutch extractor tool * Lightweight Gearbox For other LW gearbox parts, check HW AMC Gearbox section Ball bearing for mainshaft in inner case Bearing, roller, in shell for main driving gear Q Oil seal for footchange & kickstart spindles Gasket for inner gearbox case Gasket for outer gearbox cover Gasket for gearbox inspection cover Screw for inspection cover Screws for gearbox outer cover, set of Nut, mainshaft bearing; nut retaining clutch centre Washer, lock, clutch retaining nut Bush for footchange ratchet shaft, in shell Bush for footchange, in outer cover Spring, footchange pawl B Lightweight gear lever pedal (supplied without bolt or rubber), British-made AMC gear lever rubber Kickstart return spring AMC kickstart rubber, open end Washer, lock, gearbox sprocket nut AMC clutch plate, friction, bonded, double side, internal lugs AMC clutch plate, friction, bonded, single side, internal lugs AMC clutch plate, plain, external lugs Lightweight clutch plate, shouldered with external lugs, 350cc Lightweight models

G85CS Parts list. Frank Kyul, Netherlands

G85CS Parts list. Frank Kyul, Netherlands G85CS Parts list Frank Kyul, Netherlands http://home.wanadoo.nl/fxkuyl/ CYLINDER BARREL & HEAD 022298 Barrel Cylinder 1 022515 Washer Cylinder Base 1 015351 Nut. Sleeve Cylinder Head 4 042157 Washer Sleeve