Section 15, Hardware

Transcription

1 7950 Dyna Glide Section 15, Hardware Chrome Polished Allen Motor Show Bike Kits Complete motor kit includes everything needed to mount the following: rocker box, primary cover, lifter base, transmission covers, oil pump, air cleaner, cam cover, point cover, timing plug, motor mounts (early XL motor mounts include spacers). Sportster kits also include fasteners for sprocket cover, rear master cylinder and generator. Twin Cam 88 kits also include fasteners for motor case and oil hose cover. Button head allens and flat head allens are used where necessary Dyna Glide 2006-on 7950 TC Dyna Glide Dyna Glide Dyna Glide Softail 2007-on 7947 TC Softail Softail Softail Softail Evo 4 speed FLT 2009-on 7953 FLT TC FLT FLT, FXR FLT, FXR Evo 5 speed Sportster 2004-on 7934 Sportster Sportster Sportster Sportster Softail

2 Show Kits 7929 Acorn Style for TC 3617 Cap Stye for Evolution 8520 Cap Stye for Softail Show Bike Kits in Acorn & Cap style Acorn Cap Description 7922 XL Evolution 4 speed Evolution 5 speed Softail Gold as above Softail , Dyna Glide Softail, Dyna Glide Softail , Dyna Glide Twin Cam 88 Dyna 1999-on 7929 Twin Cam 88 FLT Acorn Stye for Sportster Gas Tank mounting kit Dyna 1991-on Gas Tank mounting kit Softail 2000-on

3 CHROME ACORN NUTS Sold As Noted CHROME CAP NUTS Sold As Noted Chrome Nuts CHROME PIKE NUTS Sold As Noted PCP Thread Size SAE (10 pack) (10 pack) /4-24 (10 pack) /4-28 (10 pack) /16-24 (10 pack) /8-24 (10 pack) /16-20 (10 pack) /2-20 (each) /16-18 (each) /8-18 x 15/16 (each) /8-18 x 1-1/4 (each) UNC (10 pack) (10 pack) /4-20 (10 pack) /16-18 (10 pack) /8-16 (10 pack) /16-14 (10 pack) /2-13 (each) /16-12 (each) /8-11 x 15/16 (each) /8-11 x 1-1/4 (each) METRIC x 1 (each) x 1.25 (each) x 1.25 (each) x 1.25 (each) PCP Thread Size SAE /4 x 28 (10 pack) /16 x 24 (10 pack) /8 x 24 (10 pack) /16 x 20 (10 pack) /2 x 20 (each) /16 x 18 (each) /8 x 18 x 15/16 (each) UNC (10 pack) /4 x 20 (10 pack) /16 x 18 (10 pack) /8 x 16 (10 pack) /16 x 14 (10 pack) /2 x 13 (each) /16 x 12 (each) METRIC x 1 (each) x 1.25 (each) x 1.25 (each) x 1.5 (each) PCP Thread Size SAE (10 pack) (10 pack) /4-24 (10 pack) /4-28 (10 pack) /16-24 (10 pack) /8-24 (10 pack) /16-20 (10 pack) /2-20 (each) /16-18 (each) /8-18 x 1 (each) UNC (10 pack) /4-20 (10 pack) /16-18 (10 pack) /8-16 (10 pack) /16-14 (10 pack) /2-13 (each) /16-12 (each) METRIC x 1.25 (each) x 1.25 (each) x 1.25 (each) x 1.50 (each) BSF /4-26 (each) /16-26 (each) /8-26 (each) /16-26 (each) /2-26 (each) CHROME FLAT WASHERS 2203 Fits 1/4 bolt (12 pk) 2204 Fits 5/16 bolt (12 pk) 2205 Fits 3/8 bolt (6 pk) 2206 Fits 7/16 bolt (6 pk) Fits 1/4 bolt (100 pk) Fits 5/16 bolt (100 pk) Fits 3/8 bolt (100 pk) Fits 7/16 bolt (100 pk) CHROME LOCKWASHERS Fits 1/4 bolt (100) Fits 5/16 bolt (100) Fits 3/8 bolt (100) Fits 7/16 bolt (100)

4 Chrome Screws Chrome Flat Head Allen Screws (10 pack) Fine Thread (SAE) PCP Description x 1/ x 5/ x 3/ x 1/ x 3/ x /4-28 x 1/ /4-28 x 3/ /4-28 x /4-28 x 1-1/ /4-28 x 1-1/ /4-28 x /4-28 x 2-1/ /4-28 x 2-1/ /16-24 x 1/ /16-24 x 3/ /16-24 x /16-24 x 1-1/ /16-24 x 1-1/ /16-24 x 1-3/ /16-24 x /8-24 x 1/ /8-24 x 3/ /8-24 x /8-24 x 1-1/ /8-24 x 1-1/ /8-24 x 1-3/ /8-24 x 2 Coarse Thread (UNC) PCP Description x 1/ x 5/ /4-20 x 3/ /4-20 x 1/ /4-20 x 5/ /4-20 x 3/ /4-20 x 7/ /4-20 x /4-20 x 1-1/ /4-20 x 1-1/ /4-20 x 1-3/ /4-20 x /4-20 x 2-1/ /4-20 x 2-1/ /16-18 x 1/ /16-18 x 3/ /16-18 x 7/ /16-18 x /16-18 x 1-1/ /16-18 x 1-1/ /16-18 x 1-3/ /16-18 x /8-16 x 1/ /8-16 x 3/ /8-16 x /8-16 x 1-1/ /8-16 x 1-1/ /8-16 x 1-3/ /8-16 x 2 Chrome Smooth Hex Head Bolts (10 pack) Fine Thread (SAE) PCP Description /4-28 x 5/ /4-28 x 3/ /4-28 x 7/ /4-28 x /4-28 x 1-1/ /4-28 x 1-1/ /4-28 x 1-3/ /4-28 x /4-28 x 2-1/ /16-24 x 5/ /16-24 x 3/ /16-24 x 7/ /16-24 x /16-24 x 1-1/ /16-24 x 1-1/ /16-24 x 1-3/ /16-24 x /16-24 x 2-1/ /8-24 x 3/ /8-24 x /8-24 x 1-1/ /8-24 x 1-1/ /8-24 x 1-3/ /8-24 x /16-20 x /16-20 x 1-1/ /16-20 x 1-1/ /16-20 x 1-3/ /16-20 x 2 Coarse Thread (UNC) PCP Description /4-20 x 5/ /4-20 x 3/ /4-20 x 7/ /4-20 x /4-20 x 1-1/ /4-20 x 1-1/ /4-20 x 1-3/ /4-20 x /4-20 x 2-1/ /16-18 x 5/ /16-18 x 3/ /16-18 x 7/ /16-18 x /16-18 x 1-1/ /16-18 x 1-1/ /16-18 x 1-3/ /16-18 x /16-18 x 2-1/ /8-16 x 3/ /8-16 x /8-16 x 1-1/ /8-16 x 1-1/ /8-16 x 1-3/ /8-16 x /16-14 x /16-14 x 1-1/ /16-14 x 1-1/ /16-14 x 1-3/ /16-14 x 2 Chrome Countersunk Washers for Use With Flat Head Allen Screws Chrome plated 82 degrees countersunk washers are made to accept the flat allen screws for a variety of custom applications. PCP Size Unit #10 (8 pack) /4 (8 pack) /16 (8 pack) /8 (5 pack) /16 (5 pack)

5 Chrome Screws Chrome Smooth Allen Screws (10 pack) Fine Thread (SAE) Coarse Thread (UNC) PCP Description PCP Description x 1/ x 1/ x 5/ x 5/ x 3/ x 3/ x x 1-1/ x 1-3/ /4-24 x 7/ /4-24 x 1-7/ /4-24 x 1-5/ /4-24 x 2-1/ /4-24 x 2-3/ /4-28 x 5/ /4-28 x 3/ /4-28 x 7/ /4-28 x /4-28 x 1-1/ /4-28 x 1-1/ /4-28 x 1-3/ /4-28 x /4-28 x 2-1/ /16-24 x 5/ /16-24 x 3/ /16-24 x 7/ /16-24 x /16-24 x 1-1/ /16-24 x 1-1/ /16-24 x 1-3/ /16-24 x /16-24 x 2-1/ /16-24 x 2-1/ /16-24 x 2-3/ /16-24 x /16-24 x 3-1/ /8-24 x 3/ /8-24 x /8-24 x 1-1/ /8-24 x 1-1/ /8-24 x 1-3/ /8-24 x /8-24 x 2-1/ /8-24 x 2-1/ /8-24 x 2-3/ /8-24 x /16-20 x 1-1/ /16-20 x 1-1/ /16-20 x 2-1/ /16-20 x /16-20 x 3-1/ /4-20 x 3/ /4-20 x 1/ /4-20 x 5/ /4-20 x 3/ /4-20 x 7/ /4-20 x /4-20 x 1-1/ /4-20 x 1-1/ /4-20 x 1-1/ /4-20 x 1-3/ /4-20 x /4-20 x 2-1/ /4-20 x 2-1/ /4-20 x 2-3/ /16-18 x 1/ /16-18 x 5/ /16-18 x 3/ /16-18 x 7/ /16-18 x /16-18 x 1-1/ /16-18 x 1-1/ /16-18 x 1-3/ /16-18 x /16-18 x 2-1/ /16-18 x 2-1/ /16-18 x 2-3/ /16-18 x /16-18 x 3-1/ /16-18 x 3-1/ /8-16 x 3/ /8-16 x /8-16 x 1-1/ /8-16 x 1-1/ /8-16 x 1-1/ /8-16 x 1-3/ /8-16 x /8-16 x 2-1/ /8-16 x 2-1/ /8-16 x 2-3/ /8-16 x /8-16 x 3-1/ /8-16 x 3-1/ /16-14 x 1-1/2 Chrome Button Head Allen Screws (10 pack) Fine Thread (SAE) Coarse Thread (UNC) PCP Description PCP Description x 1/ x 1/ x 5/ x 5/ x 3/ /4-20 x 3/ x 1/ /4-20 x 1/ x 5/ /4-20 x 5/ x 3/ /4-20 x 3/ x /4-20 x 7/ /4-20 x x 5/ /4-20 x 1-1/ /4-20 x 1-1/ /4-28 x 1/ /4-20 x 1-1/ /4-28 x 3/ /4-20 x 1-3/ /4-28 x /4-20 x /4-20 x 2-1/ /4-20 x 2-1/ /16-24 x 3/ /16-24 x 1/ /16-24 x 3/ /16-24 x /16-24 x 1-1/ /16-24 x 1-1/ /16-24 x 1-3/ /8-24 x 1/ /8-24 x 3/ /8-24 x /8-24 x 1-1/ /8-24 x 1-1/ /8-24 x 1-3/ /8-24 x /16-18 x 1/ /16-18 x 3/ /16-18 x 7/ /16-18 x /16-18 x 1-1/ /16-18 x 1-1/ /16-18 x 1-3/ /16-18 x /8-16 x 1/ /8-16 x 3/ /8-16 x /8-16 x 1-1/ /8-16 x 1-1/ /8-16 x 1-3/ /8-16 x

6 Hardware HEX NUTS USA Made Chrome Hex Nuts PCP Thread Quantity /4 x 20 UNC /4 x 28 SAE /16 x 18 UNC /16 x 24 SAE /8 x 16 UNC /8 x 24 SAE /2 x 20 SAE /16 x 20 SAE /8 x 18 SAE 10 Chrome NYLOC-NUTS USA Made feature plastic insert vibration proof mounting. PCP Thread Quantity /4 x 20 UNC /4 x 28 SAE /16 x 18 UNC /16 x 24 SAE /8 x 16 UNC /8 x 24 SAE /2 x 20 SAE /16 x 20 SAE /8 x 18 SAE 10 Zinc Nylock Hex Nuts (10 Pack) PCP Thread /8-24 SAE /16-20 SAE Chrome Heim Joints Heim joints have a variety of uses and are especially useful for custom shift and brake linkage creation. The 5/16 joints are available with left or right hand threads. USA made. PCP Size /4 x 1/4-28 female /16 x 5/16-24 male /16 x 5/16-24 female /16 x 5/16-24 male (left hand thread) /8 x 3/8-24 female Cad Flex Lock Nuts PCP Thread Quantity /24 NC /4 x /4 x 28 Fine /16 x /2 x

7 Chrome Hardware Chrome Caps Snap on knurled allen screw for ease of installation. Packs of 100. PCP Fits / / / Assortment of 100 pieces of each size listed above Chrome Pasties Allen head bolt covers install with a set screw. Sold in pairs for thread size listed. PCP Size / /8 Chrome Snap Caps Bolt Cap Cover Kits These bolt cover kits make any bike look great and are also great for custom builders. Beatifully designed and chromed, these caps easily install over the raw OE bolt heads on engine, transmission, primary and more. Each kit includes individually marked pieces that make identification and installation a breeze. Model Year PCP Kit Qty. Touring on on Dyna on TC on Softail on FXCW/C 2009-on FLSTSB 2009-on TC-88 Engine XL 2004-on on Engine on Chrome Bolt Cap Cover Kit 105 Piece kit with chromed ABS plastic bolt cap covers Fits FXCW, FXCWC 2009-on Allen Bolt Custom Cap Covers These cap covers are sized by bolt thread diameter. Chrome plated and machined from aluminum, these caps come with set screws and an allen wrench. Sold in pairs / / /

8 Chrome Hardware Colony Allen Screw Hole Plugs Decorative chrome plated hole plugs add a smooth finished look to your allen screw head. PCP Size Assortment tray with 100 pcs each of 1/4, 5/16 & 3/ /4 (100 pk) /16 (100 pk) /8 (100 pk) /16 (100 pk) Flat Washers Chrome I.D. Type U/M #8 Standard 100 pack #10 Standard 100 pack /4 Standard 12 pack /4 Standard 100 pack /16 Standard 12 pack /16 Standard 100 pack /8 Standard 6 pack /8 Standard 100 pack /16 Standard 6 pack /16 Standard 100 pack /2 Standard 100 pack /2 Standard 5 Pack /8 Standard 50 pack /16 5/8 OD 50 pack /4 OEM 50 pack Lock Washers Chrome OEM I.D. U/M /4 12 pack /4 100 pack / pack /16 12 pack /8 100 pack /8 6 pack / pack /16 6 pack /2 100 pack Chrome End Caps for Allen Bolts Chromed steel caps fit allen bolts of thread size 1/4 to 3/8. Sold in packs of 10. PCP Item / / /8 1/4 Chrome Flat Washers Duplicate of OEM 6099 as used on primary and cam covers pack Chrome Nylon Tie Straps PCP 25 PK

9 Trim and Hardware CHROME STANDARD NUTS Hold Down Knobs & End Caps End Caps (Pairs) PCP Description 424 Foot rest end caps Hold Down Knobs (Pairs) /2 diam. 5-1/6 x 18th /4 diam. 3/8 x 24th 434 With stud to fit stock air breather 1958-on (ea) Chrome Bullet Krommets Packs Chrome Hide A Nut This unit will cover nut & bolt heads up to 5/8 Diam Packs Sold in 10 packs. PC # Thread Size SAE /4 x /16 x /8 x /16 x /2 x /8 x 18 UNC /4 x /16 x /8 x /16 x 14 Chrome Mini Ball Our newest 1-1/4 diameter decorative chrome ball Use to replace end plugs in our rail sets or any 5/8 20 ga. tubing /16-20 thread /4-20 thread thread for H.D. choke pull knob Chrome Star Washers Ideal for use in mounting trims or accessories to fiberglass or plastic. 411 Sold in 10 packs Thread Chrome Balls (each) 418 3/8 x 24th CHROME NYLOCK NUTS Sold in 10 packs. UNC / /16 x /8 x /16 x 14 SAE / / / / / /

10 Chrome Plated Metric Fasteners Nylon Insert Locknuts (10pk) PCP Thread Size mm mm mm mm mm mm Hex Nuts (10 pack) PCP Thread Size mm mm mm mm Lock Washers (100 pack) PCP Thread Size mm mm mm mm Polished Chrome Allen Screws (10 pack) PCP Thread Size x10mm x12mm x10mm x16mm x20mm x25mm x30mm x40mm x50mm x20mm x30mm x40mm x50mm x25mm x30mm x40mm x50mm Button Head Allen Screws (10 pack) PCP Thread Size x13mm x12mm x15mm x20mm x25mm x30mm x40mm x50mm Thread Pitches for Metric Fasteners on this Page: 4mm.70 5mm.80 6mm 1.0 8mm mm mm 1.75 Flat Washers (100 pack) PCP Thread Size mm mm mm mm

11 Roller Bearings (100Packs) Sportster Rod Rollers These rod rollers fit 1954-on K and Sportster. 17 bearings used A.1875x.480 Std A.1875x A.1875x A.1875x A.1875x A.1875x A x A x Sportster Right Crankcase Roller These rollers fit 1957-on Sportster, 13 used x.800 Std x x x x x Late Type 74 & 80 Rod Rollers Late type rod rollers for 74& 80 OHV 1973 and later. 17 Bearings are used. Standard size 3/16 x B.1875x.585 Std x x x x x x x x (undersize) Big Twin Crankcase Rollers Big Twin right case 1958-on, 28 used. Also fits all interchangeable wheels using loose roller bearing A.250x.490 Std A.250x A.250x A.250x A.250x A.250x x Late Big Twin and All Sportster Short Rod Rollers These rollers fit 1973and later Big Twin, 34 used. Also fits 1954 and later Sportster, 34 used A.1875x.294 Std A.1875x A.1875x A.1875x A.1875x A.1875x A x A x x (undersize) Roller Sets Big Twin right side case rollers Size 28 set OEM Std Big Twin clutch hub rollers (20 packs) Size PCP OEM Std A

12 Bearings /16 Ball bearing XL clutch ramp XL , Starter motor gear end BT, XL 1991-on /8 Pump check valve BT 1941-on (10 pk) Starter motor gear end XL , BT Starter motor XL /32 Ball, starter motor XL 1991-on (10 pack) Starter, commutator end XL 1986-on Starter motor BT Starter motor commutator end BT/XL 1991-on Clutch ramp XL 1984-on A Outer cam Twin Cam Trap door TC 99-* A Mainshaft clutch side BT 5 speed 1984-on Transmission side cover BT 5 speed Transmission mainshaft BT 4 speed 1941-on Ball Bearings A Transmission mainshaft XL , clutch drum BT 1984-on Starter motor drive end FXR Rear fork pivot FXST (Heim) Inner chain housing BT L84-06 (pr) Brake drum 1979-on CLE Primary TC 2007-* wheel bearing FLT 2000* (pr) /4 wheel bearing fxst 2000-* A Rear fork pivot FXST 2000-* C Pinion main bearing TC 1999-* Clutch drum XL Clutch drum XL 1991-* Clutch BT Left crankcase bearing assembly BT Wheel Front/rear BT 1973-on; Front XL ; Rear XL 1979-on Left crankcase XL Wheel side car 1979-on CLE Tapered Bearings Fork Stem Bearing only for our Sportster stem cup conversion kit (549) Swing arm kit XL , FXD Head cup front fork BT 1960-on, XL 1982-on Race for head cup bearing BT 1960-on

13 Needle Bearings Bearing & Cages Needle Bearings A Transmission M/S and C/S s all BT 5 speed Countershaft low gear XL 1984-on Mainshaft 5th gear all BT 5 speed Main drive gear BT speed Transmission C/S all BT 5 speed, XL Cam gear XL 1958-on Cam gear BT Starter shaft housing BT Outer chain housing Cover BT Trans shifter BT 5 speed Mainshaft sprocket side XL Shifter drum XL Torrington inner cam Twin Cam 1999-on (pr) Tappet roller BT 1984-on, XL 1986-on As above, set of A 5th mainshaft BT & XL 1991-on Countershaft (closed end) XL Countershaft BT speed clutch gear and countershaft XL Clutch release (Wafer) BT 1975-on Cages and Bearing Sets A Rod cage & rollers BT A Rod cages & bearings XL L1986-on Cages & bearings pinion gear side (wht/gry) BT As above, green BT As above, red BT As above, blue BT Cages & bearings pinion shaft (blue) XL 1987-on Right bearing pinion STD BT Cages & bearings pinion shaft (red) XL 1987-on As above, white/grey XL 1987-on As above, green XL 1987-on BEARING RETAINING CAGES NO BEARINGS Rod cages (narrow) alloy BT (set) Rod cages (wide) alloy BT Pinion side (2) steel BT (each)

14 Lock Tabs, Keys, Shims LOCK TABS NOTE: MOST SNAP RINGS SOLD 10 PER PACK UNLESS NOTED OTHERWISE ONLINE at A Pinion shaft gear end XL 1979-on () Inner primary cover BT XL clutch ramp Starter motor shaft all Big Twin Starter motor all Big Twin Inner primary Big Twin Shifter cam XL 1954-on Transmission sprocket XL Primary adjuster Big Twin 1965-on Stem nut FL s Swing arm bolt Big Twin Side car connection bolt CLE 1979-on (each) Pulley lock plate 1992-on (each) Crank pin & pinion gear all L1981-on Oil pump drive gear XL 1988-on; pinion BT 1990-on Starter motor shaft BT 1989-on Footrest stud FXR 1987-on, KEYS Pinion gear shaft Big Twin Pinion shaft BT Kicker clutch gear BT Clutch hub Big Twin Shifter fork.007 BT speed Shifter fork.015 BT speed B Pushrod cover 1941-on all Twins Rear intake cam.005 XL 1971-on As above As above Asst. bearing shims BT 1969-on (16 pieces) As above.003 all XL 1977-on Belt spacer BT As above As above As above SHIMS Kit 1 Each of above 4 belt spacers (4 pk) Sprocket shaft all Big Twins (5) Sprocket shaft all Big Twins (5) Sprocket shaft all Big Twins (5) Brake abutment (rear) all BT ; FXWG 1983-on and FXE 1984-on Wheel hub FLT 1982-on Wheel hub FLT 1982-on Wheel hub FLT 1982-on Wheel hub FLT 1982-on Wheel hub FLT 1982-on Assortment of above (2 of each)

15 Snap Rings SNAP RINGS (Retainers) NOTE: MOST SNAP RINGS SOLD 10 PER PACK UNLESS NOTED OTHERWISE ONLINE at Clutch ramp mechanism 1987-on Big Twin Oil pump Big Twin 1970-on Pinion shaft Big Twin Choke cable FLT 1980-on Shifter linkage 1979-on Big Twin Trans release lever 5 speed BT Side cover bearing 1980-on 5 speed, BT (2 used) Starter crank pivot pin Big Twin Shifter pawl BT 4 speed; 1972-on XL Starter motor shaft BT Clutch guide 1984-on XL Clutch adjuster screw 1984-on XL Trans Gears 1980-on 5 speed BT (10 pk) (6 used) Shifter Cam 1986-on 5 speed Big Twin Chain adjuster pad BT Hand lever 1982-on all Twins Shifter shaft lever 1986-on 5 speed Big Twin Rear fork FXST A Left motor bearing 1983-on Big Twin Main drive gear bearing 1984-on Big Twin 5 speed Clutch drum 1984-on XL Right motor bearing 1987-on Big Twin, XL Mainshaft ball bearing (outer) XL Starter motor shaft (inner) 1989-on BT Starter motor shaft (outer) BT Shift pawl XL 1991-on Starter shaft nut BT 1994-on Shift brake XL 1999-on A Shift brake cam FXST 2000-on Wrist pin 1983-on BT; 1985-on XL Oil pump 1975-on XL Detent arm, XL 1991-on Shifter cam Big Twin L Access door BT 1999-on Main bearing BT 2003-on Main bearing R/S BT Main bearing L/S XL 2004-on Transmission third gear BT speed Mainshaft 3rd all XL 1956-on Counter low & second BT speed Counter shaft bearing BT speed Clutch hub bearing XL int Clutch pressure plate XL Clutch hub bearing XL ext Clutch drum bearing (ext.) BT 1984-on,XL Clutch (ext.) all BT 1990-on, XL 1991-on Clutch drum bearing (int.) BT 1984-on Clutch (int.) all BT Internal ring BT 2000-on Clutch pressure plate BT 1984-on Pressure plate (int.) all BT 1990-on Pressure plate (int.) all BT 1990-on Brake plunger rod 1987-on FXST, L1987-on FXR Brake boot retainer 1984-on FLXT, FXWG, plunger E1987-on on all FXR Brake push rod all BT 1987-on Front caliper piston 1983-on all Twins Fork stem 1986-on XL, 1987-on FLST/C/F, L1988-on FXST Oil seal (slider) FXR 1988-on Oil seal (slider) FXR Swing arm (plastic) 5 spd FLT 80-01, FXR Pivot bolt 5 speed Inner chain housing bearing 1985-on BT 5 speed Evolution exhaust port 1984-on Speedo mount all FXST Trap door bearing XL 1995-on

16 Bronze Bushings STD Piston pin XL 1957-on (pair) Piston pin XL 1957-on (pair) Same as above.005 O/S (pair) Same as above.010 O/S (pair) Oil pump shaft Big Twin 1936-on Crank case cover gear BT STD Same as above.005 O/S Same as above.010 O/S Gear cover pinion shaft BT Cam gear #1-3-4 cams XL 1957-on Cam cover rear int. Sportster 1957-on Cam gear #2 cam XL 1957-on Cam gear kit # XL 1957-on Cam cover pinion XL 1977-on Inner cam XL 1991-on Primary housing starter shaft BT 1989-on Starter shaft (primary) all BT R/Int cam XL 1991-on Foot shift brkt FL, FLH all FXWG and FXST models Primary housing shifter shaft FLT A Shifter shaft all FXR 1984-on, Dyna 1985-on M/S Drive gear BT speed Shifter shaft 1977-on XL (pair) A Brake pedal all XL 1980-on Upper slider (teflon) FXR/T 1987, FXWG 84-on Lower slider (teflon) FXR/XL 84-90, FXWG 84-on Upper slider FXRS-SP, FXLR 1987, all FXR 88* Lower slider FXRS-SP, FXLR 1987, all FXR 88* Lower slider (2) FLST 1987-on, FXST/C 1984-on Upper slider (2) FLST 1987-on, FXST/C 1984-on Inner primary shifter FX (4 speed ONLY) Brake lever hub FLT Shifter bracket FXST Up & lwr slider bushings FXD/WG 06-* (4PC) Magnetic Drain Plugs PCP Size Use /8 x 24 BT Case plug 74 & 80 (700) /2 x & XL Trans (707) /4 x 18 NPT chain cover (718) /8 x 18 Oil tank & time hole (720) /8 x 18 FXR drain (722A) /8 x 27 NPT 1990-on BT trans (739A) /2 x & 80 Inner primary ( A) Prevents metal particles from circulating through engine and transmission cases, oil tanks, etc

17 Special Nuts Tail lamp mounting--all Twins 1973-on (10 pk) Shift arm adjust BT 5 speed 1985-on W Transmission sprocket all XL 1986-on, BT 1984-on Clutch W Transmission sprocket XL Rocker shaft end caps BT (red) Same as above, green cap Same as above, blue cap Rocker shaft end caps BT (black) Same as above, orange cap Kicker & C/S BT 4 speed Pinion gear all XL 1977-on A Pinion gear all XL 1991-on, BT Mainshaft starter clutch BT Horn cover FX, FL, XL 1965-on Clutch adjusting screw XL 1984-on (well type) Split tappet cupped nuts all 9/32 x Crank pin all XL L1981-on Crank pin BT 1983-on (pair) Pinion shaft BT 1981-on Sprocket shaft BT L Gear shaft all BT Pinion shaft gear BT Bendix drive shaft FLH , FXWG 1984-on, FXSB , FXST 1986-on Shifter fork BT 4 speed Mainshaft bearing BT 4 speed A XL Drive sprocket Mainshaft & countershaft BT 5 speed 1979-on Mainshaft sprocket BT 1936-on Drive sprocket XL Clutch push rod adjusting nut BT Mainshaft XL 1991-on Clutch hub BT Transmission mainshaft all 1990-on Motor sprocket Sportster Motor sprocket BT Motor sprocket BT Nut fork stem (NOT USED W/DAMPER) FXST , FLT 1987-on, FXWG 1980-on Nut fork stem FX 1971-on Filler screw fork nut BT L77-on, FXST 1987-on B Cone seat front end w/shield FL Bearing adjust. FLT Nut-gas valve all 1975-on Horn mounting all Super nut

18 O-Rings COMPLETE LIST OF O-RINGS Please order by PC # (Most O-Rings sold in bags of 10, check website for UM) EASY REFERENCE: Use Factory parts book to obtain OEM #, then look up in our complete listings of seals, gaskets, springs, nuts, O-Rings, keys or lock tabs Tappet screen plug Big Twin Tappet guide mounting screw XL Main drive gear BT 4 speed Transmission countershaft , FL, FX 4 speed Starter motor housing XLH Shifter lever sleeve FXR Fuel sending unit 2003-on Softail Oil distick 2006-on BT 6 speed Pushrod middle V2 BT, XL (O-ring) A Flat pushrod large L (Quad) Primary filler cap L XL Front fork air control FLT Lower push rod cover Big Twin; 1986-on XL Inner chain housing Big Twin Front fork air control solenoid 1984-FLT Upper pushrod cover V2 BT; 1986-on XL (O-ring) Oil tank fitting FXST Mainshaft right side FXRS Mainshaft ball bearing clutch side 1984-on Big Twin 5 speed (Quad) Countershaft FXWG, FXEF 4 speed A Tappet guide (upper) 1986-on XL A Tappet guide (lower) 1986-on XL Front fork air control cap 1985-on FLT, FXRT Front fork air control 1991-on FLT, starter motor(2) XL , inspection covers XL 1991-on Wheel hub cap 1987-on FLST Tappet cover XL Filler plug 5 speed 1987-on Clutch cable (trans cover end) 1987-on BT, XL Clutch inspection Chain inspection cover XL 1991-on Oil pump outer TC Push rod upper cover XL Shift lever FXST Clutch cover FX, FXE, FXR, FLT, FXST A Clutch cover 1994-on A Cylinder stud insert 1986-on XL, BT 1985-on Oil filter check valve 1986-on XL A Oil pump cover XL Oil pump 1991-on XL A Intake manifold XL, BT Carb all 1990-on, XL 1989-on Drain screw carb all 1990-on Keihen carb float bowl all Twins Carb bowl all Carb bowl 1992-on all Starter motor Twins 1990-on Shifter cam L Big Twin 4 speed Front brake caliper XL & FX (single) Front fork upper plug 1984-on FLT, FLHT Fork tube plug L77-85 FL; FXWG; 1984-on FXST,FLST Slider tube cap FX, FXR, FXRT, FXRS, FXRT, XL, XLS, XLX Fork tube plug 1987-on FXLR, FXRSE Gas cap 1983-on Twins (pair) Rocker oil line seal Front turn signal lense FLT, FLST, FXRT Front or rear turn signal lense 1986-on FXR, XL; rear only FXST Twin Cam on Cylinder base Rocker arm support Cylinder head locating dowel Oil pump outer Cam position sensor Crankshaft sensor Neutral switch Upper pushrod cover FLT fork air control Cam support plate plug Oil pump inner

19 Seals SEALS: MOST SEALS SOLD 5 PER PACK UNLESS NOTED OTHERWISE ONLINE Cam cover XL Foot shifter cover BT Speed A Drive gear 74, 80 L1966-on Big Twin Clutch nut 74, BT 4 Speed Inner chain housing 1970-E84 BT 4 Speed B Left engine 74, Main drive gear XL Main drive gear seal BT A Oil pump Sportster Shifter shaft all 5 speeds M/S Sprocket XL M/S Clutch side FXR, FLT 1984-E94, XL Inner chain housing starter shaft Inner chain housing mainshaft BT A Inner primary cover all BT Mainshaft, clutch side BT, XL 2006-on (ea) Main drive gear BT 2007-on (5 pk) A Valve guide 1983-on, BT Evo 1986-on (10 pk) Oil pump BT 1968-on A Evo intake manifold 1986-on XL Intake manifold BT & XL 1989-on Starter shaft housing FXB, 84-on FXWG Engine XL late Clutch release lever FXR, FLT; primary cover XL Transmission M/S 4 speed Rear caliper seal boot kit FLT (dual piston type) Seal & boot kit, rear caliper FLT , XL, FXR, FXST L1987-on Caliper seal FX-FXR 1982-E87, XL 1983-E Fork slider 1987-on FXLR, FXRSE Fork slider FXR, FXRS, FXRT; XL; 1985 FXEF, FXSB Fork cap 1987-on FLST and FXST Fork slider FXWG Fork slider kit FLT Fork slider 1984-on FXST, 1985-on FXWG, 1987-on FLT Fork seal Dyna , V-Rod (5 pk) A F or R wheel E85 FX, XL swing arm B F or R wheel.411 all L Speedo drive unit FXR/S/T Speedo drive unit FXST

20 Studs A Cylinder head front left XL 1986-on Shift linkage (5 speed) FXST Transmission case (5) FXST 1985-on Evo exhaust 1984-on (4 studs & 4 nuts) A Engine mount bracket (short) BT 1984-on Engine mount bracket (long) BT A Cylinder stud XL 1986-on Cylinder base set BT A Cylinder base set BT Motor mount bracket BT Timer plate BT L , XL 1982-on Clutch pushrod adjuster BT 1984-on Chain adjuster XL 1986-on Anchor (brake) CLE 1979-on Master cylinder FLST/C/F L Rear turn signal 1-7/8 stud (pair) Springs PCP Application Keihin carb diaphragm ( ) (10 pack) Shift cam follower XL 1984-on ( ) (10 pk) Shifter Pawl XL 1972-on ( ) (10 pack)

21 Pins Dowel - Roll - Split - Locating - Step (Check online at for U/M) Inner primary cover BT 5 speed 1970-* FLT FXR Valve pin, oil pump BT 1986-on Roll pin, solenoid, 4 speed 1965-on Cam cover bushing XL 1957-on Transmission housing BT 5 speed Transmission housing to starter BT 1989-on Cam cover in casing (2) BT 1941-on; cylinder base (2) BT 1984-on; pinion case side (2); cylinder base XL 1986-on; casings (2) 1957-on Transmission bearing housing BT 5 speed ; inner primary cover BT 4 speed 1970-on; XL cam cover (2-3) Solenoid BT 5 Speed Roller pin, solenoid, 4 speed 1965-on Trans case to top plate BT 5 speed ; all Ignition cap BT 1968-on Oil pump XL 1977-on Oil pump XL 1961-on Transmission cam support (2) XL 1957-on Piston pin BT Transmission trap door (2) XL Shift lever pivot pin FXST Start shift lever pivot pin BT , FLT, FXR Starter crank gear - 3/8 BT Shifter shaft lever BT 5 speed 1979-on Rear brake rod clevis pin 1990-FXST Rear brake rod clevis pin FXST Rear brake clevis pin FLT 1979-*, FXST 1984-* A Stop switch lever all Hand lever pivot pin all (not XL 04-12) Anchor pin hand lever all Anchor pin hand lever all 1988-on B Pin, XL jiffy stand Pin side stand 1982-on all FLT Pin door hinge FLT

22 Spacers Colony Chrome Spacers Chrome plated steel spacers are available in a complete assortment or in 5 packs of each size. They are especially made for a snug fit on 1/4, 5/16 or 3/8 bolt. PCP Size /4 x 1/ /4 x 1/ /4 x 3/ /4 x 1/ /4 x 3/ /4 x 1 PCP Size /16 x 1/ /16 x 1/ /16 x 3/ /16 x 1/ /16 x 3/ /16 x 1 PCP Size /8 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ /8 x 3/ /8 x Complete assortment including compartment tray Spacer Chrome, steel spacers. Most sold in 10 packs. PCP IDxODxLength /4 x 7/16 x 3/ /4 x 7/16 x 1/ /4 x 7/16 x 3/ /4 x 7/16 x 5/ /4 x 7/16 x 3/ /4 x 7/16 x 7/ /16 x 1/2 x 7/32 (5 pack) /8 x 9/16 x 1/8 (5 pack) /8 x 13/16 x 1/ /16 x 11/16 x 5/16 Chrome Axle Spacers Sold each. PCP OEM ID Length A A A Speedo Drive Spacer Replaces speedo drive on all 1973-on FX-XL-FXR when front wheel drive is omitted FX, XL 1973-on FXST Bungee Nuts Made of high-grade carbon steel, then chrome plated. Bungee nuts can work as a tie-down knob or an excellent spring anchor, and can be used to replace shock absorber nuts. Sold in pairs / / /