370 Visit us on the Internet at YE Air Cleaner Adapter

Size: px

Start display at page:

Download "370 Visit us on the Internet at YE Air Cleaner Adapter"

Marjorie Blankenship
6 years ago
Views:

TOOLS & FOOT PRIMARY & ENGINE & SHEET GAS & OIL WHEELS FRAMES & HANDLEBARS SPRINGERS TRIKE GENERAL EXHAUST TRANSMISSION CONTROLS DRIVETRAIN ELECTRICAL METAL TANKS & BRAKES

Dell Orto Pumper carburetor. YE-CA-01 Sold each $69.95 YE Oil Change Helper No-mess oil changes on your 1992 1999 Big Twin are a breeze with this funnel.

95 Chrome Universal Horn This 12-volt beauty puts out a lot of sound for its size... measing a compact 2.60" in diameter.

95 YE Windage Trays And Auxiliary Scavenger Oil Pump Windage trays are mounted at specific locations, like inside the lower engine case, for superior distribution of motor

95 YE-WT-03 Fits the mini sump on XR-750 engines $56.95 YE-WT-04 Fits Big Twins with Delkron engine cases $56.95 YE-WT-05 Fits 1936 1999 HD Big Twin engines $12.

95 YE-SL-07 1982-1995 YE Skeletal Chrome Control Levers Give your bike the finger!

1 TOOLS & FOOT PRIMARY & ENGINE & SHEET GAS & OIL WHEELS FRAMES & HANDLEBARS SPRINGERS TRIKE GENERAL EXHAUST TRANSMISSION CONTROLS DRIVETRAIN ELECTRICAL METAL TANKS & BRAKES ACCESSORIES LIGHTING & RISERS & FORKS KITS Yankee Engineuity Products YE Air Cleaner Adapter For Dell Orto Carburetors Lets you put a stock Bendix or Keihin air cleaner on a Dell Orto Pumper carburetor. YE-CA-01 Sold each $69.95 YE Oil Change Helper No-mess oil changes on your Big Twin are a breeze with this funnel. It hooks to your frame and guides the drained oil from your filter into your catch pan. YE-PT-01 Sold each $18.95 Chrome Universal Horn This 12-volt beauty puts out a lot of sound for its size... measing a compact 2.60" in diameter. Features a simple 2-wire hookup and includes a universal mounting bracket Sold each $12.95 YE Windage Trays And Auxiliary Scavenger Oil Pump Windage trays are mounted at specific locations, like inside the lower engine case, for superior distribution of motor oiling. WINDAGE TRAYS YE-WT-01 Fits speed Sportster engines $45.95 YE-WT-02 Fits 1991 up 5-speed Sportster engines (including Buell XB models) $45.95 YE-WT-03 Fits the mini sump on XR-750 engines $56.95 YE-WT-04 Fits Big Twins with Delkron engine cases $56.95 YE-WT-05 Fits HD Big Twin engines $12.95 AUXILIARY SCAVENGER OIL PUMP YE-SP-01 Fits Big Twin engines and 1970 up Sportster engines $ YE-SL YE Skeletal Chrome Control Levers Give your bike the finger! These levers will fit most 1982 up Big Twins and Sportsters, and are made from heat-treated aircraft quality aluminum. They provide a great style, high quality, and a great fit. YE-SL-05 Brake lever ONLY for Big Twins $ YE-SL-06 Clutch lever ONLY for Big Twins $ YE-SL-07 Brake and clutch lever set for Big Twins $ YE-SL-08 Brake lever ONLY for Big Twins $ YE-SL-09 Brake and clutch lever set for Big Twins $ Visit us on the Internet at or us at info@paughco.com YE-SL

090101 080301 080601 SP1012C 080102 090102 090105 ALL SEATS INCLUDE TWO SEAT SPRINGS SEAT PAN La Rosa

pan polished to a mirror finish, high-density foam for maximum comfort, and top-quality leather to

They include a polished aluminum front swivel mounting bracket and 2" chrome custom springs.

These mounts are made from formed steel.

SP8203C Fits 1983 2003 Sportster models $269.95 SP0809C Fits 2004-2009 Sportster models $269.

95 080101 Shedron brown Plain $243.95 080302 Black Flames $243.95 080102 Shedron brown Flames $243.

95 16"-LONG BAD ASS SOLO SEATS 090301 Black Plain $243.95 090101 Shedron brown Plain $243.

2 SP1012C ALL SEATS INCLUDE TWO SEAT SPRINGS SEAT PAN La Rosa Design Leather Solo Seats These classic solo seats by La Rosa Designs feature a billet aluminum seat pan polished to a mirror finish, high-density foam for maximum comfort, and top-quality leather to ensure durability and long life. They include a polished aluminum front swivel mounting bracket and 2" chrome custom springs. Available in two sizes 13"-long and 16"-long, with black leather or distressed brown leather coverings, as well as a Shedron brown leather. The 13"-long seats are 10"-wide in the seating area, and the 16"-long seats are 12½"-wide in the seating area. SOLO SEAT MOUNTS FOR SPORTSTER MODELS Easy to install and work with 13" or 16" La Rosa solo seats. These mounts are made from formed steel. They re black painted and include 3" barrel springs and hardware. SP8203C Fits Sportster models $ SP0809C Fits Sportster models $ SP1012C Fits Sportster models $ "-LONG BAD ASS SOLO SEATS Black Plain $ Shedron brown Plain $ Black Flames $ Shedron brown Flames $ Black Cross $ Shedron brown Cross $ Distressed brown Plain $ "-LONG BAD ASS SOLO SEATS Black Plain $ Shedron brown Plain $ Black Flames $ Shedron brown Flames $ Black Cross $ Shedron brown Cross $ Distressed brown Plain $ To order these parts, call us at or toll free at La Rosa Design Solo Seats 371 TOOLS & EXHAUST TRANSMISSION FOOT PRIMARY & ENGINE & SHEET GAS & OIL WHEELS FRAMES & LIGHTING HANDLEBARS SPRINGERS TRIKE GENERAL CONTROLS DRIVETRAIN ELECTRICAL METAL TANKS & BRAKES ACCESSORIES & RISERS & FORKS KITS

TOOLS & FOOT PRIMARY & ENGINE & SHEET GAS & OIL WHEELS FRAMES & HANDLEBARS

METAL TANKS & BRAKES ACCESSORIES LIGHTING & RISERS & FORKS KITS La Rosa Design

top-quality, heavyweight leather, and are designed to mount on the left-side of

They feature heavy-duty straps and buckles, and measure 10"-wide x 7" to

They are the perfect match to the La Rosa Design solo seats on the previous

95 PRSBL03BH SSBBL03BH La Rosa Design Solo Saddlebags With Reserve Fuel Bottle

These saddlebags include a 1-liter fuel bottle cradled in its own leather

They re handmade from top-quality, heavyweight black leather, and designed to

They re similar in fit and function to our other La Rosa Design saddlebags.

95 SSBBL03BH Fits the left-side of rigid frames and 1984-up Softail swingarms

3 TOOLS & FOOT PRIMARY & ENGINE & SHEET GAS & OIL WHEELS FRAMES & HANDLEBARS SPRINGERS TRIKE GENERAL EXHAUST TRANSMISSION CONTROLS DRIVETRAIN ELECTRICAL METAL TANKS & BRAKES ACCESSORIES LIGHTING & RISERS & FORKS KITS La Rosa Design Saddlebags La Rosa Design Solo Saddlebags These bags are handmade from top-quality, heavyweight leather, and are designed to mount on the left-side of rigid and Softail models. They feature heavy-duty straps and buckles, and measure 10"-wide x 7" to 14"-tall x 4"-deep. They are the perfect match to the La Rosa Design solo seats on the previous page. SSB03 Black $ SSB01 Shedron brown (not shown) $ PRSBL03BH SSBBL03BH La Rosa Design Solo Saddlebags With Reserve Fuel Bottle Who couldn t use a lttle extra fuel onboard? These saddlebags include a 1-liter fuel bottle cradled in its own leather holster. They re handmade from top-quality, heavyweight black leather, and designed to mount on the left-side of 2004-up Sportster and Softail models. They re similar in fit and function to our other La Rosa Design saddlebags. PRSBL03BH Fits 2004-up Sportster models $ SSBBL03BH Fits the left-side of rigid frames and 1984-up Softail swingarms $ FSBCL Visit us on the Internet at or us at info@paughco.com PRSBL06 La Rosa Design Solo Saddlebags For Late Sportster and Dyna Glide Models Handmade from top-quality, heavyweight distressed leather, and designed to mount on the left-side of 2004-up Sportster and Dyna Glide models. They feature heavy-duty straps with roller buckles, and are the perfect match to the La Rosa Design distressed leather solo seats on the previous page. FSBCL06 Fits 2004-up Dyna Glide models $ PRSBL06 Fits 2004-up Sportster models $221.95

920 919 915 918 919A Engine, Clutch & Transmission Tools 921 922 923 To order these parts, call us at 775-246-5738 or toll free at 800-423-2621 Engine, Clutch and Trans- mission Tools For Big Twins

Fits 1955 up Big Twins. 920 Complete kit $128.95 CLUTCH HUB AND SPROCKET PULLER For pulling the 1936 early 1984 clutch hubs on Big Twin and 45" models (will not work on 5-stud clutch hubs).

4 A Engine, Clutch & Transmission Tools To order these parts, call us at or toll free at Engine, Clutch and Trans- mission Tools For Big Twins And Sportsters A selection of essential tools for working on many Evolution and pre-evolution models. SPROCKET SHAFT BEARING TOOL Used to install the crankshaft into the crankcase Timken bearing. Fits 1955 up Big Twins. 920 Complete kit $ CLUTCH HUB AND SPROCKET PULLER For pulling the 1936 early 1984 clutch hubs on Big Twin and 45" models (will not work on 5-stud clutch hubs). Can also be used on the motor sprockets on Big Twins and Sportsters, transmission sprockets on Sportsters, and alternator rotor assemblies on Big Twins. 915 Sold each $58.95 PINION GEAR PULLER Used to remove the pinion gear on Sportsters and Big Twins (except Twin Cams). 918 Complete kit $ COUNTERSHAFT SPROCKET LOCKNUT WRENCH Special wrenches for removing or installing the countershaft sprocket nuts. 919 Fits all 1936 early speed transmissions $ A Fits all 5-speed transmissions $73.95 CRANKCASE LAPPING TOOL Fits 1930 up Big Twin engines and Sportster and K-model engines (OEM ). 921 Complete kit $ TRANSMISSION LAPPING TOOL Used on Big Twins and Sportsters (OEM ). 922 Complete kit $ ENGINE AND TRANSMISSION LAPPING TOOL Used on 1930 up Big Twins and Sportsters (OEM ). 923 Complete kit $1, TOOLS & EXHAUST TRANSMISSION FOOT PRIMARY & ENGINE & SHEET GAS & OIL WHEELS FRAMES & LIGHTING HANDLEBARS SPRINGERS TRIKE GENERAL CONTROLS DRIVETRAIN ELECTRICAL METAL TANKS & BRAKES ACCESSORIES & RISERS & FORKS KITS

5 TOOLS & FOOT PRIMARY & ENGINE & SHEET GAS & OIL WHEELS FRAMES & HANDLEBARS SPRINGERS TRIKE GENERAL EXHAUST TRANSMISSION CONTROLS DRIVETRAIN ELECTRICAL METAL TANKS & BRAKES ACCESSORIES LIGHTING & RISERS & FORKS KITS Engine, Clutch & Transmission Tools Engine And Transmission Tools For Big Twins And Sportsters A selection of essential tools for working on many Evolution and pre-evolution models. VALVE GUIDE DRIVER TOOL SET Use to remove valve guides on Big Twin, Sportster and 45" engines. Includes a 5/16" driver, an 11/32" driver and a 3/8" driver. 910 Set of 3 $38.95 SHIFT FORK GAUGE Commonly used to adjust the shift forks on speed transmissions. 913 Sold each $ WRIST PIN KEEPER INSTALLER For split step ring keepers on 1972 and earlier engines. 914 Complete kit $27.95 MAIN DRIVE GEAR BUSHING TOOL Used to insert a new bushing in the main drive gear. It holds the bushing (OEMs or ) so that it will not buckle while under pressure. Fits Big Twins from Sold each $58.95 ROD RACE PRESS TOOL Designed to facilitate the installation or extraction of rod races. This tool provides support without bending the rods on Big Twin and Sportster engines. 917 Complete kit $ Visit us on the Internet at or us at info@paughco.com

7402 33125-89 33396-39 35050-40 25448-84 33082-16 33197-79 34066-52 35216-26 45680-30 60-2080 33318-85 34180-33 37503-41 To order these parts, call us at 775-246-5738 or toll free at 800-423-2621

95 CLUTCH LOCK TAB Fits 1984 1994 Sportsters. 25448-84 Pack of 10 $27.95 COUNTERSHAFT LOCK TAB Fits 1937 1986 4-speed Big Twins. 33082-16 Pack of 10 $27.

6 To order these parts, call us at or toll free at Lock Tabs Lock Tabs A large selection of lock tabs for a wide variety of applications. INNER PRIMARY LOCK TAB Fits speed models Pack of 10 $22.95 CLUTCH LOCK TAB Fits Sportsters Pack of 10 $27.95 COUNTERSHAFT LOCK TAB Fits speed Big Twins Pack of 10 $27.95 STARTER SHAFT BOLT LOCK TAB Fits 1989 Big Twins ONLY Pack of 10 $27.95 TRANSMISSION PLUNGER BODY BOLT LOCK TAB Fits Big Twins Pack of 10 $27.95 INNER PRIMARY LOCK TAB Fits 1985 up Big Twins Pack of 10 $18.95 STARTER LOCK TAB Fits speed Big Twins Pack of 10 $27.95 CAM FOLLOWER LOCK TAB Fits 1952 early 1979 Big Twins Pack of 10 $27.95 SHIFTER FORK LOCK TAB Fits speed Big Twins Pack of 10 $27.95 MAINSHAFT BEARING LOCK TAB Fits speed Big Twins Pack of 10 $27.95 MAINSHAFT SPROCKET NUT LOCKWASHER Fits W and G models Pack of 10 $18.95 CLUTCH HUB LOCK NUT TAB Fits 1941 early 1984 Big Twins Pack of 10 $27.95 SPRINGER ROCKER ARM LOCK TAB Fits the stock HD Springers on Big Twins, solos and Servicars Pack of 10 $24.95 PRIMARY BOLT LOCK TAB Fits the bolts that fasten the outer primary to the transmission on Big Twins Pack of 10 $ TOOLS & EXHAUST TRANSMISSION FOOT PRIMARY & ENGINE & SHEET GAS & OIL WHEELS FRAMES & LIGHTING HANDLEBARS SPRINGERS TRIKE GENERAL CONTROLS DRIVETRAIN ELECTRICAL METAL TANKS & BRAKES ACCESSORIES & RISERS & FORKS KITS

TOOLS & FOOT PRIMARY & ENGINE & SHEET GAS & OIL WHEELS FRAMES & HANDLEBARS SPRINGERS TRIKE GENERAL

& FORKS KITS Urns Paughco Biker Themed Urns Paughco proudly announces a new line of beautiful biker

These American-made urns are manufactured in our facility in Carson City, NV and designed using

These urns are very unique and provide a great way to pay final tribute to your loved ones.

Available in five styles and three different finishes, polished chrome, polished copper plate or gloss

814IL-UC Chrome $549.95 814IL-UCP Copper $549.95 814IL-UB Black $549.

5"-wide. HFB-C Chrome $499.95 HFB-CP Copper $499.95 HFB-B Black $499.

95 867-UCP Copper $499.95 867-UB Black $499.95 MINI COFFIN TANK Measures 15.5"-tall x 9"-wide x 4"-deep.

7 TOOLS & FOOT PRIMARY & ENGINE & SHEET GAS & OIL WHEELS FRAMES & HANDLEBARS SPRINGERS TRIKE GENERAL EXHAUST TRANSMISSION CONTROLS DRIVETRAIN ELECTRICAL METAL TANKS & BRAKES ACCESSORIES LIGHTING & RISERS & FORKS KITS Urns Paughco Biker Themed Urns Paughco proudly announces a new line of beautiful biker themed memorial urns. These American-made urns are manufactured in our facility in Carson City, NV and designed using existing Paughco motorcycle parts. These urns are very unique and provide a great way to pay final tribute to your loved ones... what better way to honor a motorcycle guy or gal. Available in five styles and three different finishes, polished chrome, polished copper plate or gloss black powderpaint. WALL MOUNT DISHED HALF TANK Measures 16"-long x 9"-tall x 5.5"-wide. 814IL-UC Chrome $ IL-UCP Copper $ IL-UB Black $ IL-BK Optional chrome shelf bracket $ FAT BOB HALF TANK Measures 19"-long x 8"-tall x 5.5"-wide. HFB-C Chrome $ HFB-CP Copper $ HFB-B Black $ FRISCO-STYLE PEANUT TANK Measures 16"-long x 7.5"-tall x 9"-wide. 867-UC Chrome $ UCP Copper $ UB Black $ MINI COFFIN TANK Measures 15.5"-tall x 9"-wide x 4"-deep. MCU-C Chrome $ MCU-CP Copper $ MCU-B Black $ BARREL-STYLE OIL TANK Measures 9.5"-long x 6"-diameter. 746-UC Chrome $ UCP Copper $ UB Black $ Note: Urns are custom built to order... please allow 2 weeks for production. Frisco-Style Peanut Tank Dished Half Tank Optional Shelf Bracket Barrel-Style Oil Tank 376 Visit us on the Internet at or us at info@paughco.com

8 Mini Coffin Tank Fat Bob Half Tank To order these parts, call us at or toll free at Urns 377 TOOLS & EXHAUST TRANSMISSION FOOT PRIMARY & ENGINE & SHEET GAS & OIL WHEELS FRAMES & LIGHTING HANDLEBARS SPRINGERS TRIKE GENERAL CONTROLS DRIVETRAIN ELECTRICAL METAL TANKS & BRAKES ACCESSORIES & RISERS & FORKS KITS

Bushings & Hardware 233 Clutch Release Components 230 Kicker Covers & Parts 232. Mounting Plates 231 Shifter Components 230

Bushings & Hardware 233 Clutch Release Components 230 Kicker Covers & Parts 232 Lock Tabs 234 Mounting Plates 231 Shifter Components 230 TOOLS & FOOT PRIMARY & ENGINE & SHEET GAS & OIL WHEELS FRAMES &