Footpegs & Foot Controls

Transcription

1 Footpegs & Foot 3 3

2 Forward Control Kits 3 Tribal Forward by Accutronix These unique forward controls feature a one-of-a-kind custom look that adds the finishing touch to your custom bike. Machined from aerospace grade 6061 T6 aluminum with a show-chrome finish and a 5/8"-diameter master cylinder bore. These controls also contain sealed bearings for superior performance and durability. Adjustable brake and shift assemblies for optimum riding comfort. Includes shift rod and mounting hardware. Master cylinder bore diameter measures 5/8" Fits all Softail models from 2000 to present $1, Note: Kickstand installation requires the additional purchase of a CC #12214 (OEM A) chrome billet kickstand mounting bracket. Optional Matching Tribal Grips and Footpegs Male mount passenger footpegs (sold in pairs) $ Handlebar grips (sold in pairs) $ Footpegs & Foot Diamond Forward with Knurled Pegs by Accutronix These chrome billet forward controls feature a smooth bend in the shift and brake lever for that contoured look. Topped off with beautiful knurled toe peg and footpegs. These controls also contain sealed bearings for superior performance and durability. No more worry about pegs and/or levers coming loose. The brake and shift levers are adjustable for optimum riding comfort. Includes shift rod and all mounting hardware. Master cylinder bore diameter measures 5/8". Matching knurled rear pegs and hand grips are available Fits all Softail models from 1984 thru $ Without kickstand mount for all Softail models from 1984 thru 1999 (for models that mount the kickstand behind the primary to provide a clean flush finish) $ " extended forward controls for all Softail models from 1984 thru $ Fits all Softail models from 2000 to present $ " extended forward controls for all Softail models from 2000 to present $ Note: Custom brake lines are required. Note: Kickstand installation on 2000 and later Softail models requires the additional purchase of a CC #12214 (OEM A) chrome billet kickstand mounting bracket. Note: Installation on 1984 thru 1986 Softail models requires relocation of the oil filter. Optional Matching Grips and Footpegs Knurled rear pegs (sold in pairs) $ Knurled hand grips (sold in pairs) $ Prices appearing in this catalog are Suggested Retail Price and are subject to change*

3 Forward Control Kits Apparel Bike Kits & Trailers Slotted Ball Milled Seats & Bags Foot Hand Chrome Billet Forward by Accutronix These top-quality, American-made forward controls are machined from aerospace grade 6061-T6 aluminum. Features include splined shafts for complete adjustability, and sealed roller bearings. Kits come complete with shift rods, brake rods and mounting hardware. For FX Softail Models from 1984 thru 1999 Engineered to mount in the stock position on FXST, FXSTC and FXSTS models. Uses the Original Equipment master cylinder (not included). Standard Length Ball milled style $ Slotted style $ "Extended Ball milled style $ Slotted style $ Note: Custom brake lines are required. Installation on 1984 thru 1986 Softail models requires relocation of the oil filter. For FX Softail Models from 2000 to Present Each kit includes new shifter and brake rods. Standard Length Ball milled style $ Slotted style $ "Extended Ball milled style $ Slotted style $ Note: Custom brake lines are required. Note: Kickstand installation on 2000 and later Softail models requires the additional purchase of a CC #12214 (OEM A) chrome billet kickstand mounting bracket. For Dyna Glide Models Utilizing a special backing plate, the controls move your foot position a full 12" forward from the stock position on Super Glide models. Fit all models from 1991 to present. Standard Length Ball milled style $ Slotted style $ "Extended Ball milled style $ Slotted style $ For FL Softail Models and Custom Application Big Twins from 1986 thru 1999 Includes 5/8"-bore chrome master cylinder. Will mount on 4-speed and rigid frames, but may require shift rod modifications. Note: The 3" extended kit is not recommended for FL Softail models due to a lack of fender clearance. Standard Length Ball milled style $ Slotted style $ "Extended Ball milled style $ Slotted style $ For Rubber-Mount Touring Models Ideal for those who want to stretch out on their Dresser, and if you want that custom look without floorboards. Fit Touring models from 1997 to present. Use the Original Equipment master cylinder and install with regular hand tools Ball milled style $ Slotted style $ Slotted Shorty Forward for Softail Models by Accutronix Chrome billet forward controls sit 2" back compared to stock controls. Adjustable brake and shift assemblies for optimum riding comfort. Comes slotted with rubber pegs $ Fits all Softail models from 1984 thru 1999 and custom models Note: Custom brake lines are required. Installation on 1984 thru 1986 Softail models requires relocation of the oil filter. Passenger Footpegs Matching male mount passenger footpegs to complement the forward controls $ Sold in pairs Elite Slotted Forward for Softail Models by Accutronix Elite chrome forward controls have a soft double bend for great looks and sealed bearings for great performance. Adjustable brake and shift assemblies for optimum riding comfort. Comes slotted with rubber pegs $ Fits all Softail models from 1984 thru 1999 and custom frames Fits Softail models from 2000 to present Note: Custom brake lines are required. Note: Kickstand installation on 2000 and later Softail models requires the additional purchase of a CC #12214 (OEM A) chrome billet kickstand mounting bracket. Note: Installation on 1984 thru 1986 Softail models requires relocation of the oil filter. Passenger Footpegs Matching male mount passenger footpegs to complement the forward controls $ Sold in pairs Lighting Electrical Exhaust Intake Engine Gaskets Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Forks & Shocks Sheetmetal General 3.03 Cross Reference

4 Forward Control Kits 3 Footpegs & Foot Supreme Legends USA Classic Forward Control Kits The most economical high-quality billet forward controls Supreme Legends USA has to offer. Choose from highly-polished or chrome finishes. Newly-improved quality upgrades for the strongest, smoothest fit possible Manufactured in the USA from 6061-T6 billet aluminum and precision CNC-machined to the highest standards possible Rubber is UV resistant, and long-lasting Include chrome mounting hardware (do not include brake line or shift linkage) Master cylinder utilizes a 3/4"-bore, and is compatible with all current brake systems Supreme Legends USA Premium Forward Control Kits Award-wining and beautifully-crafted billet forward controls from Supreme Legends USA. Available only with a chrome finish. Available with Ribbed Pegs for your Pleasure For Twin Cam 88 Softail Models Fits all FX Softail models from 2000 to present. Can also be installed on FL Softail models if floorboard are removed Polished with rubber band footpegs $ Chrome with rubber band footpegs $ Polished with ribbed footpegs $ Chrome with ribbed footpegs $ Note: Custom brake lines are required. Note: Kickstand installation on 2000 and later Softail models requires the additional purchase of a CC #12214 (OEM A) chrome billet kickstand mounting bracket. For 4-Speed FL/FX Models and 5-Speed Softail Models Fit 4-speed models from 1958 thru 1986 (except 4-speed Softail models), and all 5-speed Softail models from 1986 thru Polished with rubber band footpegs $ Chrome with rubber band footpegs $ Polished with ribbed footpegs $ Chrome with ribbed footpegs $ Note: Custom brake lines are required. Note: Installation on 1986 Softail models requires relocation of the oil filter. For all Dyna Glide Models from 1991 to Present Polished with rubber band footpegs $ Chrome with rubber band footpegs $ For all FXR Models from 1982 thru Polished with rubber band footpegs $ Chrome with rubber band footpegs $ Replacement Parts Master cylinder rebuild kit for CC # s thru $22.00 Newly-improved quality upgrades for the strongest, smoothest fit possible Manufactured in the USA from 6061-T6 billet aluminum and precision CNC-machined to the highest standards possible Designed with smooth end caps to hide assembly hardware Side port master cylinder included for running a hidden brake line Folding or solid footpegs available Includes chrome mounting hardware (does not include brake line or shift linkage) Matching handlebar grips and footpegs available separately with Master Cylinder Integrated master cylinder uses banjo bolt fitting on the backside where it s nearly invisible. Innovative design and flawless chrome make these sets a custom show stopper. Include hardware and shifter rod. Master cylinder utilizes a 9/16"-bore and is compatible with all current brake systems Solid footpegs. Fits all Softail models from 2000 to present (uses stock shift rod) $ Solid footpegs. Fits all 5-speed Softail models from 1986 thru 1999 (uses stock shift rod) $ Fold-up footpegs. Fits all Softail models from 2000 to present (uses stock shift rod) $ Fold-up footpegs. Fits all 5-speed Softail models from 1986 thru 1999 (uses stock shift rod) $ Fold-up footpegs. Fits FXR models from 1982 thru $ Fold-up footpegs. Fits Dyna Glide models from 1991 to present $ Master cylinder rebuild kit $49.95 Note: Custom brake lines are required. Note: Kickstand installation on 2000 and later Softail models requires the additional purchase of a CC #12214 (OEM A) chrome billet kickstand mounting bracket. Note: Installation on 1986 Softail models requires relocation of the oil filter. Using Stock Master Cylinder These controls were designed to replace stock mid-mount or forward controls and work with the stock rear master cylinder. Included are brackets, brake rod, and chrome mounting hardware Solid footpegs. Fits 5-speed FX Softail models from 1986 thru 1999 (uses stock brake and shift rods) $ Fold-up footpegs. Fits FXR models from 1982 thru $ Solid footpegs. Fits Dyna Glide models from 1991 thru $ Note: Installation on 1986 Softail models requires relocation of the oil filter. Optional Matching Grips and Footpegs Handlebar grips (sold in pairs) $ Angle mount passenger pegs (sold in pairs) $ Straight mount passenger pegs (sold in pairs) $ Prices appearing in this catalog are Suggested Retail Price and are subject to change*

5 Forward Control Kits Apparel Bike Kits & Trailers Seats & Bags Foot Supreme Legends USA Pro-Smooth Forward Control Kits Provide a superior blend of form and function at affordable prices. These stylish billet forward controls are available with a show-quality chrome finish. Newly-improved quality upgrades for the strongest and smoothest fit possible Manufactured in the USA from 6061-T6 billet aluminum and precision CNC-machined to the highest standards possible Designed with smooth end caps to hide assembly hardware Side port master cylinder included for running a hidden brake line Rubbers are UV resistant, and long-lasting Includes chrome mounting hardware (does not include brake line or shift linkage) Master cylinder utilizes a 3/4"-bore and is compatible with all current brake systems Matching handlebar grips and footpegs available separately 2" extended forward controls are also available Standard Forward Fits FX Softail models from 1984 thru $ Fits FX Softail models from 2000 to present $ Fits Dyna Glide models from 1991 to present $ Fits FXR models from 1982 thru $ " Extended Forward Fits FX Softail models from 1984 thru $ Fits FX Softail models from 2000 to present $ Note: Kickstand installation on 2000 and later Softail models requires the additional purchase of a CC #12214 (OEM A) chrome billet kickstand mounting bracket. Optional Matching Grips and Footpegs Handlebar grip set $ Rear footpeg set $ Replacement Parts Footpeg set (includes clevis) $ Toe peg set $61.00 Pro-One Chrome Billet Forward Exclusive styling features and innovative engineering are beautifully combined in this Pro-One design. Mounting plates and levers are machined from 6061-T6 aircraft quality aluminum with stainless steel footrest mounts and lever shafts. Smooth control operation is assured by roller and thrust bearings on all pivot points to eliminate any slop or play. Includes mounting hardware, master cylinder, and stainless steel shift rod $ Fits 4-speed FL and FX models from 1958 thru 1986 (except 4-speed Softail models), and 5-speed Softail models from 1986 thru 1999 Note: Custom brake lines are required. Installation on 1986 Softail models requires relocation of the oil filter. Choppers Inc. Devil s Tail Foot The same foot controls used on Billy Lane s Devil in a Red Dress bike and the Miss Behavin bike, which was built for the Discovery Channel s biker build-off between Billy Lane and Roger Bourget $ Can be used as jockey shift Fits all Softail models 1984 thru 1999 Bolts to stock mounts and uses stock master cylinder Comes with everything pictured Complete kit Hand Lighting Electrical Exhaust Intake Engine Gaskets Tranny & Clutch Driveline Chrome Forward Control Kits for Big Twin Models These affordable kits include O-ring footpegs and toe pegs, and chrome master cylinders. The brake pedals and shift levers ride on bronze bushings giving smoother pedal action. The footpeg supports have female clevis that will accept most aftermarket footpegs. Kits include installation instructions, a universal nylon brake line kit, mounting hardware and a selection of shifter rods. Fit all 4-speed FL, FX models from 1958 thru 1986 (except 4-speed Softail models), and 5-speed Softail models from 1986 thru $ Kit with 3/4"-bore master cylinder for use with stock calipers Kit with 5/8"-bore master cylinder for use with aftermarket calipers Note: Some late model FXs were manufactured without a mounting tab on the right end of the lower engine mount crossmember. These motorcycles require the additional purchase of a CC #17503 Weld-on Frame Tab which is sold separately. Wheels, Tires & Brakes Frames Forks & Shocks Sheetmetal General 3.05 Cross Reference

6 Forward Control Kits 3 Footpegs & Foot Excel EL Series Forward Features CNC machined billet aluminum construction, bronze bushing bearings and excellent quality. Brake line connection is hidden behind the master cylinder giving the controls a clean, sleek look. Includes a set of Full Rubber footpegs. All mounting stainless steel hardware included. Fits all Softail models from 1984 thru Available in a polished aluminum finish $ /8" master cylinder bore /8" master cylinder bore Excel Standard Quick Shift Forward Excel standard forward controls are built with comfort and durability in mind. The smooth performance of these controls make them a favorite among riders who need functionality with a show quality appearance. Features CNC machined billet aluminum construction, adjustable levers and hidden brake line mount. Shifter features an adjustable quick shift lever to make shifting easy and precise. Stainless steel, polished hardware connects it all to your frame. Available in chrome finish. They fit all Softail models from 1984 thru Footpegs and shifter toe peg are sold separately as a set. Select from the styles below $ /8" master cylinder bore /8" master cylinder bore Excel HE Series Forward The HE series High End forward controls combine great quality in a sleek package. Features a unique integrated master cylinder reservoir, needle roller bearing movement and a hidden brake line mount, making these controls the envy of your friends. Adjustable levers and stainless steel hardware complete the package. When you want your bike to have a clean look, there is nothing better than HE forward controls. They all Softail models from 1984 thru Available in chrome finish. Footpeg and shifter toe peg are sold separately as a set. Select from the styles below $ /8" master cylinder bore /8" master cylinder bore Radial Full Straight Straight Spiral Spiral Full Excel Footpeg Sets Innovative chrome billet designs include the forward control footpegs and a shifter toe peg Spiral Rib footpeg set $ Full Rubber footpeg set $ Straight Rib footpeg set $ Radial Rubber footpeg set $ Radial Excel Optional Passenger Pegs Spiral Rib male mount pegs $ Straight Rib male mount pegs $ Full Rubber male mount pegs $ Radial Rubber male mount pegs......$ Prices appearing in this catalog are Suggested Retail Price and are subject to change*

7 Forward Control Kits Apparel Bike Kits & Trailers Seats & Bags Foot Chrome Billet Forward Control Kits by Billet Concepts Beautiful chrome-plated billet aluminum forward control kits. Available with pegs in the stock location or 3" extended for more leg room. Kits do not include brake lines or shift rods. For 4-Speed FL/FX Models and 5-Speed Softail Models Fit 4-speed models from 1958 thru 1986 (except 4-speed Softail models), and all 5-speed Softail models from 1986 thru Kit with rubber belted footpegs $ " extended kit with rubber belted footpegs $ Kit with ball milled footpegs $ Note: Custom brake lines are required. Installation on 1986 Softail models requires relocation of the oil filter. For all FXR Models from 1982 thru Kit with rubber belted footpegs $ For all Dyna Glide Models from 1991 to Present Kit with rubber belted footpegs $ Replacement Parts Master cylinder rebuild kit $ Master cylinder (sold each) $ Rubber belted footpeg (sold each) $ Rubber belted shifter peg (sold each) $ Beauty cone for brake pivot (sold each) $ Brake pedal pad (sold each) $ Replacement rubber rings (sold as set) $24.49 Thunder Cycle Design Forward Control Kit Same forward controls featured on Eddie Trotta's Camel series and on the Discovery Channel Bike Build-Off. Machined from billet aluminum with a show-chrome finish and a 3/4"-diameter master cylinder bore Fits all Softail models from 1986 thru 1999 (brake and shifter toe pegs and forward control footpegs sold separately) $ Note: Custom brake lines are required. Installation on 1986 Softail models requires relocation of the oil filter Fits all Softail models from 2000 to present $$ Note: Kickstand installation on 2000 and later Softail models requires the additional purchase of a CCI# (OEM A) chrome kickstand mounting bracket. Death Series Forward Control Folding Footpegs with Ball Detent Choose from a variety of stylish patterns. Footpegs measure 81/2"-long and are sold in pairs Twisted $ Crossed $ Ball Milled Speared $ Ball milled pattern $ Smooth $ Twisted Death Series Toe Pegs Available in smooth pattern only, and sold each Smooth (3"-long) $ Smooth (4"-long) $49.95 Crossed Smooth Optional Death Series Folding Rear Footpegs with Ball Detent Choose from a variety of stylish patterns. Footpegs measure 61/2"-long and are sold in pairs. Speared Twisted $ Crossed $ Speared $ Ball milled $ Smooth $ Optional Death Series Handlebar Grips Fit all models from 1973 to present (except those with handlebar air reservoirs) sold in pairs Twisted $ Crossed $ Speared $ Ball milled $ Smooth $ Hand Lighting Electrical Exhaust Intake Engine Gaskets Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Forward for Softail Models by Billet Concepts Simple and efficient single shaft design. Integrated ball detent folding pegs share a single shaft with shift and brake levers for rattle-free performance. Chromeplated billet aluminum construction accented with stepped machined details and rubber band style pegs Fits 4-speed FL and FX models from 1958 thru 1986 (except Softail models) and 5-speed Softail models from 1986 thru $ Fits all Twin Cam 88 Softail models from 2000 to present $ Note: Custom brake lines are required. Note: Kickstand installation on 2000 and later Softail models requires the additional purchase of a CC #12214 (OEM A) chrome billet kickstand mounting bracket. Note: Installation on 1986 Softail models requires relocation of the oil filter. Forks & Shocks Sheetmetal General 3.07 Cross Reference

8 Forward Control Kits 3 Footpegs & Foot BDL Forward by Dalton Designs These show-quality forward controls are CNC-machined from billet aluminum. Features hidden hardware securing the master cylinder cover, pivot points and footpegs. Adjustable brake and shifter lever height. Side brake hose port. Direct brake actuation eliminates the flex often found in heim joints. Fit Softail models from 1986 thru Chrome $ Polished $ Replacement Parts Shifter/brake pegs (sold in pairs) $ Footpegs (sold in pairs) $ Master cylinder top gasket $ Master cylinder rebuild kit $15.49 Note: Custom brake lines are required. Installation on 1986 Softail models requires relocation of the oil filter. Thunder Heart Chrome Billet Forward Quality, CNC-machined billet components have brilliant chrome-plating. Includes raised pegs that mount to control shaft for cleaner looks and better feel, as well as a shifter rod and master cylinder. Available in standard or 2" extended versions for 5-speed Softail models from 1986 thru Standard length $ " extended $ Rear pegs (sold in pairs)....$ Note: Custom brake lines are required. Installation on 1986 Softail models requires relocation of the oil filter Chrome Billet Forward Control Kits Billet aluminum forward control kits include all mounting hardware to fit all 4-speed FL, FX and FXWG models from 1958 thru 1986, and 5-speed Softail models from 1986 thru $ Kit with 5/8"-bore master cylinder for use with stock and single-piston calipers Kit with 3/4"-bore master cylinder for multi-piston and multiple rear calipers Note: Custom brake lines are required. Installation on 1986 Softail models requires relocation of the oil filter Prices appearing in this catalog are Suggested Retail Price and are subject to change*

9 Forward Control & Extension Kits Apparel Bike Kits & Trailers Seats & Bags Foot JayBrake Radial Slotted Forward Control Sets for Softail Models Redesigned JayBrake forward controls reflect the new sleeker look of the radially machined foot controls and the softer imaging of edges. While offering the same strength and show quality workmanship that has gone into every set of JayBrake forward controls. Includes right and left controls in a brilliant chrome finish. For Softail Models from 2000 to Present Wide Bands pegs 3/4"-bore master cylinder $1, Wide Bands pegs 5/8"-bore master cylinder $1, Full Rubber pegs 3/4"-bore master cylinder $1, Full Rubber pegs 5/8"-bore master cylinder $1, Dove Tail Strips pegs 3/4"-bore master cylinder $1, Dove Tail Strips pegs 5/8"-bore master cylinder $1, For Softail Models from Late 1987 thru Wide Bands pegs 3/4"-bore master cylinder $ Wide Bands pegs 5/8"-bore master cylinder $ Full Rubber pegs 3/4"-bore master cylinder $ Full Rubber pegs 5/8"-bore master cylinder $ Dove Tail Strips pegs 3/4"-bore master cylinder $ Dove Tail Strips pegs 5/8"-bore master cylinder $ Ness-Tech Radius Forward Control Kits Integral 3/4"-bore master cylinder for incredible stopping power Master cylinder linkage is hidden and shift controls feature teflon bushings for smooth operation CNC-machined from 6061-T6 aluminum before being chrome-plated Accepts any male mount footpegs or mini floorboards and shift pegs (not included) Includes custom kickstand mount and custom shifter rod......$ Stock length for Softail models from 2000 to present Stock length for Softail models from 1984 thru Stock length for Dyna Glide models from 1993 to present " extended for Softail models from 2000 to present " extended for Softail models from 1984 thru 1999 Note: There is no provision for a brake light switch on these forward controls. We recommend the use of a CC #14137 Banjo Bolt Brake Switch. Hand Lighting Electrical Exhaust Intake Engine Gaskets Ness-Tech Forward Control Extensions for 2000-Up Softail Models Relocates the Original Equipment foot controls 3"-forward to increase legroom. Includes a pair of black anodized billet aluminum adaptor plates, extended stainless steel rear brake line, extended shifter rod, kickstand spring, pin, and mounting hardware $ Fits all Twin Cam 88 FX Softail models from 2000 to present Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Forks & Shocks JayBrake 2" Extension Kits for Softail Models Chrome-plated brackets and rods give you an extra 2" of legroom. They fit all Softail models from 1987 thru 1999 equipped with JayBrake forward controls Classic $ Sculpted $ ZCB Forward Control Adaptors Allows you to use any 1999 and earlier forward controls on any of the Twin Cam 88 Softail models. Sold in sets $ Fits all Softail models from 2000 to present Sheetmetal General 3.09 Cross Reference

10 Forward Control Kits Style A Style B 3 Footpegs & Foot Extended Forward Control Kits for Softail Models Designed just for you big bikers 6 ft. or taller, these chrome-plated kits extend the footpegs four inches further forward. Unlike the stock forward controls, our kits also bring the footpegs level with each other providing the rider with a more secure feeling and better control. So that you don t have to lift your feet for braking and shifting, our kits retain the stock pegto-pedal distances by utilizing many of the major components from your bike along with longer shifter and brake rods. The backing plates are made from 5/16" billet steel for superior strength. Installs in less than one hour. Includes all necessary parts and detailed instructions Fits early 1987 FX Softail models with top-finned caliper (also fits 1986 models if the oil filter is relocated) $ Fits FX Softail models from late 1987 thru 1999 (with smooth caliper) $ Note: 1990-up models will require the additional purchase of an OEM or equivalent shifter arm. Another simpler option is to enlarge the shifter shaft bushing in our backing plate to 9/16"-diameter (.5625") using a drill bit or reamer. Style A Available For Twin Cam 88 Models RST New Design Forward Uniquely-shaped, billet aluminum forward controls with TÜV approval for 4-speed Big Twins, Softail, Dyna Glide, Sportster and Twin Cam 88 models. Available with Rubberband and Knurled peg designs. The versions for 4-speed Big Twins and Softail models up to 1999, and the controls for Twin Cam 88 models are extended 3 cm. Style B Fit all 4-Speed FL and FX Models from 1958 thru 1986, and 5-Speed FX Softail Models from 1986 thru 1999 (3cm extended) Style B ( Rubberband ) $1, Style A ( Knurled ) $1, Fit Twin Cam 88 Softail Models from 2000 to Present (3cm extended) Style B ( Rubberband ) $1, Style A ( Knurled ) $1, Fit Sportster Models from 1991 thru Style B ( Rubberband ) $1, Style A ( Knurled ) with TÜV $1, Fits Dyna Glide Models from 1991 to Present Style B ( Rubberband ) $1, Fits FXR Models from 1982 thru Style B ( Rubberband ) $1, RST New Design Black Powder Coated Extended Aluminum Forward Uniquely-shaped forward controls with TÜV approval for 4-speed Big Twins and Softail models. The versions for Big Twins thru 1999, and 2000-up Twin Cam 88 models are 3 cm extended Fits 4-speed FL and FX models from 1958 thru 1986 (except Softail models) and 5-speed Softail models from 1986 thru $1, Fits all Twin Cam 88 Softail models from 2000 to present..$1, Prices appearing in this catalog are Suggested Retail Price and are subject to change*

11 Forward Control Kits Apparel Bike Kits & Trailers Seats & Bags Foot Hand Lighting OEM-Style Forward Control Kits Chrome-plated kits for OEM style floorboards or 3/8" stud mount custom footpegs. The shifter kit has a splined shift lever and arm, shift peg, braced shifter backing plate, FL and FX shifter rods, and mounting hardware. The brake kits are available with or without master cylinder, and include a backing plate, brake pedal, brake pedal stop, return spring, plunger, and mounting hardware. Forward Shifter Kit For 4-speed Big Twins 1952 thru $ Forward Brake Kits with Master Cylinder For 4-speed Big Twins 1970-early $ for 4-speed Big Twins 1958 thru $ Forward Brake Kits without Master Cylinder For 4-speed Big Twins 1970-early $ For 4-speed Big Twins 1958 thru $93.99 Electrical Exhaust Intake Engine Chrome Forward This chrome forward control kit converts mid-shift FX or FL models with floorboards to the clean smooth lines of late Softail models. Constructed of heavy-gauge steel, both the brake and shift sides are chrome-plated and come complete with footpegs and mounting hardware. They are also available separately. Master cylinder sold separately $ Includes shift (CC #060050) and brake (CC #130423) assemblies Forward Control Shifter Kit Features a heavy-duty mounting bracket and rubber pegs with chrome end caps. Kit comes complete with linkage for ratchet top (1952-early 1979) and rotary top (late ) shifters. Fits 4-speed Big Twin models from 1952 thru 1986 and 5-speed Softail models from 1986 thru Forward shift kit $ Replacement backing plate......$54.49 Note: FX models must re-use existing original Equipment shift rod end. Forward Control Brake Kit Features a heavy duty mounting bracket and rubber pegs with chrome end caps. Available for 4-speed Big Twin models from 1970 thru 1986 with Wagner or Kelsey-Hayes style 1-piece master cylinder. Kit comes complete with mounting bracket, brake pedal, master cylinder plunger, footpeg and hardware Forward brake kit $ Replacement backing plate for Wagner or Kelsey-Hayes master cylinders.$ Replacement pedal return spring..$4.99 Note: Master cylinder sold separately Forward Brake Kit with Master Cylinder This brake control kit includes a chrome Wagner-style master cylinder, brake pedal, backing plate, return spring, plunger, pedal stop and hardware $ Fits Big Twin models 1973-early 1979 (disc brake) Weld-On Frame Tab Weld-on right hand side frame mounting tab for all late model 4-speed Big Twins without the Original Equipment mounting tab Sold each $6.54 Forward Shifter Kit This original style replacement forward control set features a heavy duty mounting bracket and comes complete with ratchet top dust cover and arm. Fits FL models from 1952-early 1979 and FX models from 1971 thru Also can be used as a forward shift conversion kit on FX models from 1974-early 1979, however it will reverse the shift pattern $ Works with floorboards or footpegs 3.11 Gaskets Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Forks & Shocks Sheetmetal General Cross Reference

12 Forward Control Kits 3 Footpegs & Foot Forward for Dyna Glide Models Available in stock or 2"-extended length. Extension kit moves Original Equipment forward controls on Dyna Wide Glide models 2" farther forward. Complete kits include ribbed foot and shifter pegs, mounting plates, control arms and all hardware. The extension kit includes chrome mounting plates with shifter and brake rods, re-using other forward control components. Fit all Dyna Glide models from 1991 to present Stock length kit $ " extended kit $ Extension kit for FXDWG forward controls $95.99 Forward Control Set for FXR Models An easy-to-install, American-engineered forward control assembly for all of the 5-speed FXR models from 1982 thru 1994 whether Shovelhead or Evolution -powered. Simple installation does not require the primary cover to be removed. All parts are show-chromed. A chrome cap for the thruthe-case shifter, and a complete hardware set are included Complete kit, includes brake and shifter control $ Replacement shifter shaft cover and screw for CC # $ Replacement brake pedal $ Replacement shift lever $ Santee Forward Control Kit for FX Models A complete kit for moving the FX mid-mount controls to a more comfortable position near the front frame downtubes. Fits all FX models from 1973 thru 1985 with mid-mount controls regardless of which of the three Original Equipment master cylinders are fitted. All major components are flawlessly chrome-plated including the ribbed pegs. Oversized rubbercovered brake and shifter toe pegs and hardware are included Fits all FX models from 1973 thru 1985 (except Softail and 4-speed FXWG models) $ Prices appearing in this catalog are Suggested Retail Price and are subject to change* Chrome Forward for Softail Models These stock-style forward controls replace the Original Equipment black painted units with brilliant chrome-plated parts. Brake and shift kits are sold separately and come complete with footpeg and mounting hardware. Brake Control Kits Original brake master cylinder and linkage is retained. Kit for 1982-early 1987 models also works well as a mid shift conversion on 4-speed FL models with remote reservoir master cylinders Fits FX Softail and 4-speed FXWG models 1982-early $ Fits FX Softail models from late 1987 thru $ Fits FX Softail models from 1989 thru $ Shift Control Kit Features our heavy-duty investment cast bracket and comes complete with shift rod with rod ends Fits 5-speed FX Softail models from 1986 thru $115.64

13 Floorboard Forward Control Kits Apparel Bike Kits & Trailers Seats & Bags Foot Hand Lighting Electrical Exhaust Chrome Billet Aluminum Floorboard Unique forward controls with integral floorboard mounts by Billet Concepts that set the standard for function with style. They feature onboard master cylinders with hidden brake line ports, and stepped billet styling on all arms, levers and control surfaces Fits Softail models from 1987 thru $ Fits all FXR models from 1982 thru $ Note: Installation on FXR and Softail models may require custom brake lines, and installation on 1986 and earlier FX Softail models requires oil filter relocation. Intake Engine Gaskets Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Floorboard Forward Control Kit for Softail Models by Khrome Werks Provides full support while riding by moving the controls almost 3 inches further forward. Utilizes the stock shift lever, with hinged chrome-plated steel floorboards. This kit includes a new rear brake pedal and is recommended for riders under 6 feet tall because the brake pedal provides a more upright position. Fits all FX Softail models from 1986 thru $ Complete kit Note: Installation on 1986 models requires relocation of the oil filter. Floorboard Forward for Softail Models Chrome shifter and brake side controls with floorboards. Includes chromeplated mounting brackets, floorboards, brake pedal and heel/toe shift levers, and chrome master cylinder with cover. Use as a chrome replacement for FL Softail models, or swap from pegs to floorboards on FX Softail models, or add forward control floorboards to scratch-built machines. Fits all Softail models from 1987 thru $ Complete chrome floorboard kit Note: 1986 and earlier models require brake line modifications and relocation of the oil filter Forks & Shocks Sheetmetal General Cross Reference

14 Forward & Specialty 3 Footpegs & Foot Chrome Forward Control Kits for Late Sportster Models Features integrated shift lever and brake lever on the footpeg shaft. Similar to the stock style forward controls found on Sportster models from 1998 to present that are equipped with OEM style forward controls. Fits 5-speed Sportster models from 1991 thru All chrome hardware and instructions included (footpegs not included) $ Replaces OEMs , Forward Control Kits for Evolution Sportster Models Available in two different versions to fit all models from 1986 to present. Each kit includes all the necessary brackets, pedals, linkage, O-ring pegs, hardware and detailed instruction sheet to convert both brake and shifter to forward-mount style Fits all Evolution Sportster models with 4-speed transmissions from 1986 thru $ Fits all Evolution Sportster models with 5-speed transmissions from 1991 thru $ Note: CC #17545 will not fit with Original Equipment highway bars Replacement brake pedal for CC # $ Replacement shift lever for CC # $11.09 Brake Side Mid Foot Control Kit for V-Rod Models by Kosman Specialties Designed to provide a different riding position A preferred position for comfort an sport riding A complete bolt-on kit supplied with all necessary hardware and easy to follow instructions Will only fit with aftermarket exhaust such as Vance & Hines, or Screamin Eagle exhausts will not fit with stock exhaust system The parts are machined out of aircraft grade aluminum alloy with a silver powder-coat finish Fits all V-Rod models from 2002 to present $ Shift Side LSL Rear Set for Sportster Models This kit is a must for any high performance Sportster model. CNC-machined ergonomic rear sets provide the proper riding position. They work well with stock handlebars and feature folding footpegs and a special bracket for the shift side because there are no existing mounting holes on the stock frame. Silver anodized for strength and wear protection Fits all Sportster models from 1986 thru $ Prices appearing in this catalog are Suggested Retail Price and are subject to change*

15 Economy Forward Control Kits Apparel Bike Kits & Trailers Seats & Bags Extended Forward for Early Sportster Models Stretch out with these extended chromed controls for Sportster models. Unlike other kits, the original master cylinder is retained in the factory position, eliminating the need to re-bleed or re-plumb messy brake lines. Heavy-duty mounting plates are over 5/16" thick with a 1 diameter footpeg support. Heim joints at control linkage ends provide smooth operation with minimal maintenance. Complete with chrome ribbed pegs and rubber shift and brake pads $ Fits Sportster models from 1980 thru 1981 Santee Forward for Sportster Models Two complete and easy-to-install kits for moving the stock controls to a more comfortable position near the front frame downtubes. All major components are flawlessly chrome-plated including the ribbed pegs. Oversized rubber-covered brake and shifter toe pegs and mounting hardware are included Fits Sportster models from 1957 thru $ Fits Sportster models from 1977 thru $ Foot Hand Lighting Electrical Exhaust Intake Engine Gaskets Tranny & Clutch Forward Control Sets for Sportster Models Available for mechanical or disc brake models these forward control units provide a more comfortable riding position. Includes rubber footpegs with chrome end caps. Complete Kits Sets include both shift and brake controls Fits Sportster models from 1975 thru $ Fits Sportster models from 1977 thru 1978* $ Fits Sportster models from 1979 thru 1981* $ Brake ONLY Available for mechanical or hydraulic disc brakes. Kits for hydraulic disc are designed to work with Wagner or Kelsey-Hayes style 1-piece master cylinders Fits Sportster models from 1975 thru Mechanical cable operated linkage. Right side brake $ Fits Sportster models from 1979 thru Hydraulic disc brake. Right side brake $76.99 Note: Kit requires extended brake line (not included) Brake cable replacement for CC # $28.99 Shift ONLY Fits Sportster models from 1975 thru Left side shift.....$73.99 *Note: Kit requires modification to stock shift arm. Most installations will require longer motor mount bolts. Use CC #36134 (sold separately) Budget Forward Control Sets Forward controls sold in complete sets or individually by side. Complete Sets For FL models from 1958 thru 1985 and 1971 thru 1973 FX models (hydraulic rear brake only requires longer hose)...$ For FX models from 1974-early $ Brake Side Only For FL/FX models from 1936 thru 1978 (hydraulic rear brake only requires longer brake hose) $ For Sportster models from 1957 thru 1974 (left-side cable-operated brake) $ For Sportster models from 1979 thru 1985 (requires longer brake hose) $94.59 Shift Side Only Fits 1971 thru 1973, FXWG models 1980-early 1985* $ For Sportster models from 1954 thru 1974 (right-side shift)..$ For Sportster models from 1977 thru 1985 (left-side shift)...$91.99 * Requires relocation of horn on some models. Driveline Wheels, Tires & Brakes Frames Forks & Shocks Sheetmetal General 3.15 Cross Reference

16 Adjustable Mini Floorboard Kits Footpegs & Foot Adjustable Passenger s Mini-Floorboard Kits for Softail Models Designed to bolt to the passenger footpeg mounting points and available in two different versions. One has mini Shaker floorboards with vibration-absorbing dampers. Both kits have 7/8" of fore-to-aft movement and may be rotated in a 360 arc. Kits include everything necessary to make the conversion, and fit all FX Softail models and FLST models from 1984 thru 1999, and FLSTC models from late 1987 thru 1989 ( FLSTC models must use CC #09904). Floorboards measure approx. 71/4" x 31/2" Kit with Shaker mini-floorboards $ Kit with mini-floorboards $ Kit with Shaker mini-floorboards for FLSTC models from 1990 thru $ Universal Adjustable Mini-Floorboard Kits for Highway Bars Designed to clamp-on to highway bars and features vibration-absorbing dampers in the floorboards. In addition to having 7/8" of fore-to-aft movement, they may also be rotated in a 360 arc. Includes everything necessary for installation and features flawless chrome-plating on the individual components. Floorboards measure approximately 71/4" x 31/2" Fits 1"-diameter highway bars $ Fits 11/4"-diameter highway bars (shown) $ Note: These floorboard kits should not be used under normal stop-and-go operating conditions 3.16 Prices appearing in this catalog are Suggested Retail Price and are subject to change*

17 Adjustable Mini Floorboard Kits Apparel Bike Kits & Trailers Seats & Bags Foot Adjustable Driver s Mini-Floorboard Kit Fit into the stock female footpeg clevis on models with forward controls. In addition to 7/8" of fore-to-aft movement, they may be rotated in a 360 arc. Kit includes everything necessary for installation and features flawless chrome-plating on the individual components $ Fits Dyna Wide Glide, FXST, FXSTC, FXSTS, FXSTSB, and 4-speed FXWG models from 1983 to present Hand Lighting Electrical Exhaust Intake Engine Adjustable Passenger s Mini-Floorboard Kit for FXR Models Bolts to the passenger footpeg mounting point on FXR models. Shaker floorboards have vibration-absorbing dampers, 7/8" of fore-to-aft movement, and rotate in a 360 arc. Kit includes everything necessary for installation and features chrome-plated components. Floorboards measure approx. 71/4" x 31/2" $ Fits all FXR models from 1982 thru 2000 Gaskets Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Forks & Shocks Adjustable Passenger s Mini-Floorboard Kit for Dresser Models Bolts to the passenger floorboard mounting point on all late model Dressers. Mini-floorboards have vibration-absorbing dampers with 7/8" of fore-to-aft movement, and can be rotated in a 360 arc. Kit includes everything necessary to make the conversion and features flawless chrome-plating on the individual components. Floorboards measure approx. 71/4" x 31/2"...$ Fits all FLT, FLHT and FLHS models from 1987 thru Sheetmetal General Cross Reference

18 Floorboards Footpegs & Foot Tour Ease Mini Floorboards May be installed in any clevis-style footpeg mounts, including as passenger floorboards for Softail models, or to replace the stock rider pegs on FXR or Softail models. Additional holes permit them to be rotated 15 for increased comfort Sold in pairs (measure 8"-long x 4"-wide) $41.19 Note: When used in place of highway pegs, these floorboards should not be used under normal stop and go conditions Replacement bolt and spacer set (sold in pairs) $ Replacement mounting blocks (sold in pairs) $17.24 Rear Passenger Floorboards Chrome floorboards provide additional comfort. They bolt-on in minutes, but will not work on models with kickstart only due to interference with the kickarm. Sold in pairs $ Fit 4-speed Big Twins from 1958 thru 1986 (except Softail models) Tour Ease Passenger Floorboards These passenger boards provide excellent comfort, and have a unique universal mounting system that promotes easy installation. Made from 12-gauge steel with rubber pads, and triple chrome-plated Set of two floorboards $ Replacement floorboard pads (sold in pairs) $11.29 Adjustable Passenger Floorboard and Footpeg Mounting Kits Chrome steel floorboard kit allows you to update your Touring or FXR model with passenger floorboards that can be adjusted over a range of 11/2". Includes left and right-side swingarm pivot brackets and all necessary hardware for installation. Installation may require the additional purchase of passenger floorboards and mounting brackets. Chrome steel footpeg kit permits you to bolt footpegs to the swingarm pivot bracket on Touring and FXR models where floorboard mounting brackets have traditionally been installed. Permits the footpegs to be rotated in a 360º arc providing a wide range of adjustment. Includes chrome-plated pivot brackets, extensions, adjustable bracket and arm, clevis and all necessary hardware for installation. Fit all Touring and FXR models from 1980 to present Adjustable passenger floorboard kit $ Adjustable footpeg kit $ Note: Passenger footpegs are not included in the kit Prices appearing in this catalog are Suggested Retail Price and are subject to change*

19 Floorboards Apparel Bike Kits & Trailers Seats & Bags Foot Ness-Tech Full-Length Floorboard Kits Eliminate the need for forward controls or highway pegs. Made from 3/8"-thick billet aluminum plate, machined for cushioned rubber inserts and chrome-plated. They measure approximately 19"-long x 4"-wide and include all necessary mounting brackets and hardware. Sold in sets Fits FL Softail models from 1986 to present $ Replacement rubber inserts (set of 16) $ Hand Lighting Electrical Exhaust Cyclesmiths Banana Boards Floorboards are curved in front and back for a great look, with a high-grip riveted footpad. Available in 14" and 19" lengths, passenger floorboards and brake pedal cover. Floorboards fit the late spacing used on all 5-speed models with floorboards from 1980 to present. Passenger boards fit all models from 1994 to present originally equipped with rear floorboards, while the brake cover fits FL Softail models from 1986 to present and Touring models from 1983 to present. Sold in pairs Driver floorboards (14"-long)...$ Driver floorboards (19"-long)...$ Passenger floorboards $ Brake pedal cover (sold each)....$79.95 Ness-Tech Mini Floorboards An exciting alternative to full-sized floorboards for a leaner, custom look. Made from chromeplated billet aluminum. Measures 8"-long x 31/2"-wide x 3/8"-thick. Includes all necessary mounting hardware. Sold in sets Male mount (shown) $ Replacement rubber inserts (set of 8) $14.89 Adjustable Floorboard Kits Kits permit a full seven inches of fore-aft adjustment along with angle and height adjustability utilizing forged and chrome-plated mounting brackets. Available with modified versions of our popular oval floorboards or oval shaker floorboards. Fit all 4-speed FXWG models from 1980 thru 1986, and all Softail or Dyna Wide Glide models from 1984 to present (except FL Softail models). May also be installed on any motorcycle with clevis-style footpeg mounts. For example, they will fit on the rear of Softail models as a set of passenger floorboards. Includes hardware and instructions Kit with oval shaker floorboards......$ Kit with oval floorboards (shown).....$ Tour Ease Custom Floorboards Custom assemblies include custom pad with cover, vibration dampers and heavy-gauge chrome steel bases. Available in oval or rectangular styles. Early Floorboards Fits 4-speed FL models from 1966 thru Oval (sold in pairs) $ Rectangular (sold in pairs)......$ Late Floorboards Fits 5-speed Touring models and FL Softail models from 1980 to present Rectangular (sold in pairs)......$ Custom Floorboard Pads Feature non-slip rubber pads, chrome slotted covers and high density vibration dampers. Ready for mounting on stock floorboard bases Rectangular (sold in pairs) $ Intake Engine Gaskets Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Forks & Shocks Sheetmetal General Cross Reference

20 Floorboards & Brackets Early Model Late Model Footpegs & Foot Original Equipment-Style Floorboards Available in three different versions that fit the stock mounting brackets on all 4-speed models from 1940 thru The oval shaker floorboards provide Original Equipment styling, with floating upper plates just like the late model floorboards. Replacement bracket kits are available separately. Floorboard Sets Standard oval floorboards (repl. OEM ) $ Rectangular shaker floorboards (repl. OEM TA) $ Oval shaker floorboards $80.99 Note: Installation of oval shaker floorboards on foot clutch models reduces the amount of travel available for the foot clutch rocker pedal. Modifications may be required on these models. Replacement Parts Black rectangular pads (repl. OEM T) sold in pairs $ Black oval pads (sold in pairs) $ Replacement bumpers (repl. OEM ) set of $ Rectangular floorboard upper plate with pad (sold each) $16.99 Late Model Floorboards These alternatives to the stock floorboards fit all 5-speed Touring and FL Softail models from 1980 to present. The oval shaker set has the mounting brackets offset from the center of the floorboards. Depending on which way they re installed, you ll end up with your feet approximately 1" further ahead of, or further behind, the stock position. This permits you to tailor your foot placement for increased comfort. The rectangular shaker floorboards are replacement items for crash-damaged or used motorcycles. Compatible with Original Equipment or CC replacement parts. Floorboard Sets Rectangular shaker floorboards (repl. OEM A) $ Standard oval floorboards $54.49 Floorboard Spacer Models equipped with floorboards require this aluminum spacer to provide the correct floorboard and shift lever clearance Complete kit $22.49 Replacement Parts Rectangular pads (repl. OEM T) sold in pairs $ Replacement pads for oval floorboards (sold in pairs) $ Replacement bumpers (repl. OEM ) set of $ Rectangular floorboard upper plate with pad (sold each) $16.99 Solid Floorboards for FL Models Chrome plated floorboards with solid mount pads fit FL models Can also be used on early steel primaries when bracket kit is used. Sold in pairs Floorboard set $ Rectangular pads (repl. OEM T) $ OEM-Style Bracket Kits for Floorboards Replacement brackets and mounting tabs for installing floorboards Bracket kit for aluminum primary $ Bracket kit for tin primary $40.99 Prices appearing in this catalog are Suggested Retail Price and are subject to change* Vintage-Style Floorboards for Touring and Softail Models Chrome plated vintage style floorboards feature raised footpad and anti-vibration dampeners for a comfortable ride. Fits 5-speed Touring models from 1980 to present, and Fat Boy and Heritage Softail models from 1986 to present. Replacement rubber pads and vibration dampener kits are also available separately Floorboard set (repl. OEM T) $ Black replacement pads for oval floorboards (sold in pairs) $ Replacement bumpers (repl. OEM ) set of 8....$10.99

21 Floorboard Brackets & Covers Apparel Front Floorboard Brackets for Touring Models Great for replacing Original Equipment black brackets. Made from investment cast steel and beautifully chromed. Fit the driver s floorboards on all 5-speed Touring models from 1983 to present Rear, left-side (repl. OEM B)..$ Rear, right-side (repl. OEM B)..$ Front, (sold in pairs) repl. OEM B....$ Bike Kits & Trailers Seats & Bags Foot Hand Lighting Electrical discontinued Exhaust Intake Chrome Swingarm Blocks for Touring Models by Accutonix CNC-machined from 6061-T6 billet aluminum. Replaces the stock swingarm mounting blocks. Also has mounts for Original Equipment rear floorboards $ Fits all Touring models from 1993 to present Floorboard Adapter Bracket Special bracket used when installing muffler pipes on 1970 thru speed FL models, to keep floorboards clear of pipes $ Sold each Chrome Passenger Floorboard Support Brackets Chrome-plated die-cast steel passenger floorboard supports. Sold in pairs Fits all 1987 Touring models (repl. OEM ). Can also be used on these models from 1988 thru 1992 to lower the floorboards 11/2"......$ Fits Touring models from 1987 thru 1992 (repl. OEM ). Can also be used to raise the floorboards 11/2" on 1987 Touring models $ Floorboard Brackets for Softail Models Chrome replacement floorboard brackets to fit all FL Softail models from 1987 thru Right-side bracket (repl. OEM A) sold each $ Left-side bracket (repl. OEM B) sold each $ Doss Floorboard and Shifter Bracket Cover Kit This 4-piece kit of ribbed chrome steel covers adds a clean finished look to Softail models equipped with floorboards. Includes covers for the right-side floorboard bracket and support, and for the master cylinder, and a matching cover for the shifter bracket. The kit s components are also available separately below Fits FL Softail models from 1989 thru $ Floorboard Bracket Cover Set Two-piece set enhances the look of the right floorboard/master cylinder mounting bracket Fits FL Softail models from late 1987 thru $52.39 Shifter/Kickstand Bracket Cover Covers the Original Equipment bracket to minimize the unfinished look of the stock parts Fits FL Softail models from 1989 thru 1999 (will not work with Original Equipment highway bars) $79.99 Engine Gaskets Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Forks & Shocks Sheetmetal General 3.21 Cross Reference

22 Floorboard Covers Footpegs & Foot Doss Floorboard Undercovers Covers are made from heavy-gauge stamped steel with flawless chrome-plating. Instructions and all necessary mounting hardware are included. Sold in pairs $ Fit the Original Equipment driver s floorboards on all 5-speed Touring and FL Softail models from 1980 to present Ness-Tech Floorboard Skins Update your floorboards with these chromeplated billet aluminum floorboard skins. They replace the top plate and rubber pad of your Original Equipment or rectangular floorboards and bolt solidly to the bottom plate on all models made since Easily adapted to the older floorboards on models dating back to Floorboard skins (sold in sets)...$ Replacement rubber inserts (set of 8) $18.95 Pro-One Floorboard Covers and Brake Pedal Cover Great-looking chrome-plated billet items complement the graceful lines of your bike. All have ball milled details on their upper surfaces. Front Floorboards Install over the stock floorboards $ Fits FL Softail and 5-speed Touring models from 1980 to present Brake Pedal Cover Two-piece design has a lower plate that encloses the stock brake pedal lever and holds the ball milled top pad $ Fits FL Softail models from 1987 to present, and 5-speed Touring models from 1983 to present Chrome Undercovers for Passenger Floorboards Look good even when passenger floorboards are folded up. Simple installation limited to drilling mounting holes in the floorboard bases. Sold in pairs $ Fit all Touring models from 1987 to present Chrome Undercovers for Passenger Floorboards A great accessory to stylize passenger floorboards. The concho and leather accent look great when the floorboards are folded up. Easy-to-install, includes hardware $ Fit all FLT, FLHT, FLHS and Road King models from 1987 to present Doss Floorboard Pads Designed to replace the top plate and rubber pad of your Original Equipment or CC rectangular floorboards, and still utilize the stock rubber bumpers. Rubber inserts are sandwiched between stamped steel plates which feature flawless chrome-plating, and the ribs protrude thru slots cut into the top plate. Pads may be installed on the stock bottom plates of all models made since 1966 or if the rubber bumper mounts are not desired, bolted to the bottom plates by drilling two small holes at the front and rear of each one. Includes 8 new rubber bumpers Complete kit $ Replacement ribbed insert (pair).$ Doss Lighted Passenger Floorboard Covers For added lighting and increased visibility. Fits Touring models from 1987 to present. Sold in pairs Lighted floorboard marker lights only for Touring models already equipped with CC #46372 or OEM $ Bottom cover only (sold in pairs) $ Replacement bulbs (pack of 10) $ Prices appearing in this catalog are Suggested Retail Price and are subject to change*

23 Footpegs Apparel Death Series Smooth Shifter Pegs The original Death Series CNC-machined from billet aluminum with show chrome quality Enhances your custom bike like no other Includes 5/16" mounting bolt required to install on forward controls "-long (sold each) $ "-long (sold each) $49.95 Twist Speared Crossed Smooth Bike Kits & Trailers Seats & Bags Foot Ball Milled Hand Death Series Forward Control Footpegs by Thunder Cycle Design The original 'Death' Series Enhances your custom bike like no others CNC machined from billet aluminum with show chrome quality Measures 81/2" in length with ball detent 3/8" mounting bolt required to install Sold in pairs Twist pattern $ Crossed pattern $ Speared pattern $ Ball milled pattern $ Smooth pattern $ Lighting Electrical Exhaust Intake Engine.44 Magnum Footpegs by Choppers Inc. Polished aluminum ends with.44 magnum shell casings fit into the lathe-turned bodies. Footpegs feature 1/4" drilled dimples in a staggered pattern. Available for rider or passenger. Sold in pairs Rider pegs (71/2"-long, 3/8"-16 mounting) $ Passenger pegs (31/2"-long, 3/8"-16 mounting) $ Twist Speared Ball Milled Gaskets Tranny & Clutch Hex-Shaped Footpegs by Perse Hex design features hidden stainless steel hardware and a dual stainless steel ball detent that positively locates the pegs in position. Machined from 6061-T6 grade aluminum, they are available in chrome, or a gloss black anodized finish. Stainless steel mounting hardware included. Sold in pairs Chrome footpegs $ Black footpegs $ Smooth Crossed Death Series Passenger Footpegs by Thunder Cycle Design The original 'Death' Series Enhances your custom bike like no others CNC machined from billet aluminum with show chrome quality Measures 61/2" in length with ball detent 3/8" mounting bolt required to install Sold in pairs Twist pattern $ Crossed pattern $ Speared pattern $ Ball milled pattern $ Smooth pattern $ Driveline Wheels, Tires & Brakes Frames Forks & Shocks Sheetmetal General 3.23 Cross Reference

24 Footpegs O-Rings Footpegs & Foot Custom Chrome O-Ring Pegs Kick Pedal and Shifter Pegs (sold each) Kick pedal (flat) $ Shift peg (short stud) $9.49 Custom Pegs (sold in pairs) /8"-24 stud mount $ /2"-20 stud mount $ Clamp-on $ Fits 5/8" square bars used in most after market highway bars $18.49 Note: When used as highway pegs, these footpegs should not be used under normal stop-and-go operating conditions. Passenger Pegs (sold in pairs) Fit most models from 1971 to present Standard length pegs (repl. OEM T) $ Extended length pegs (1"-longer than stock) $ Driver Pegs (sold in pairs) Fit Sportster models from 1954 thru 1990 and FX models from 1971 thru Replaces OEM T $25.99 Fit FXR models (except FXRD and FXRP) from 1982 thru 1994 and Sportster and Dyna Glide models from 1991 to present (except Dyna Wide Glide models) Replaces OEM T $40.99 Replacement O-Ring Sets Contains enough O-rings for one footpeg Fits CC #19953 flat kick pedal, and #12931 or #12934 driver pegs.....$ For CC #19955 shift peg $ For CC #12933 pegs or stud mount and clamp-on custom pegs $ Discontinued Custom Foot and Shifter Pegs by Paul Yaffe Originals Chrome-plated, CNC-machined footpegs and shifter toe pegs designed by master customizer Paul Yaffe. Available in three different male mount styles including the Billet and Rubber which features a non-slip rubber grip surface. Matching grips are available for some styles. Footpegs (sold in pairs) Billet and Rubber $ Billet Diamond $ Billet Smooth $ Shifter Toe Pegs (sold each) Billet and Rubber $ Billet Diamond $ Billet Smooth $36.99 Handlebar Grips (sold in sets) Billet Smooth (not shown)......$ Billet Shift Peg Spacer by Paul Yaffe Originals Provides extended reach for easier shifting and braking. Made from chrome plated aluminum. Fits all Yaffe and Original Equipment shifter toe pegs $ Sold each Shifter Toe Pegs Wide selection of toe pegs in the market from stock to custom. Sold each Black rubber toe peg with chrome end cap and short stud $ Stock replacement black rubber toe peg with short stud (repl. OEM T) $ Stock replacement black rubber toe peg with long stud (repl. OEM T) $ Round O-ring toe peg (repl. OEM T)..$9.49 Replacement O-Rings Fits CC #19955 (repl. OEM T) $ Prices appearing in this catalog are Suggested Retail Price and are subject to change*

25 Footpegs Apparel Bike Kits & Trailers Seats & Bags Foot Hand Lighting Mirage Footpegs By combining our chrome and ribbed footpegs with the Mirage design we ve added a new styling accent to complete the integrated look achieved with Mirage accessories like derby and point covers, air cleaner insert, master cylinder cover, gas caps and many other items. Sold in pairs Large, male mount $ Large, 5/8" female mount $ Large, female mount $ Small, male mount $ Small, female mount $ Small, 5/8" female mount $45.84 Custom Chrome Knob End Pegs Innovative exclusive design integrates a chrome-plated die-cast body with rubber inserts for a more comfy ride and hot looks. Sold in pairs Large, male mount $ Large, female mount $ Large, 5/8" female mount $ Small, male mount $ Small female mount $ Small, 5/8" female mount $47.94 Knob End Shifter Toe Peg Sold each $12.89 Electrical Exhaust Intake Engine Gaskets Tranny & Clutch Knurled Passenger Footpegs by Accutronix Great looking foot pegs made in the U.S.A. from billet aluminum and then flawlessly chromeplated. Features unique Knurled design. Sold in pairs Knurled rear footpegs $ Optional Matching Hand Grips Knurled hand grips (sold in pairs) $ 'Tribal' Footpegs by Accutronix Unique design to compliment your custom bike. Machined from billet aluminum with show chrome quality finish. Matching hand grips and forward controls available. Measures 6" in length. Sold in pairs $ Fits all models with female-style clevis Driveline Wheels, Tires & Brakes Frames Landmark Diamond II Footpegs These chrome-plated billet aluminum, Landmark pegs provide great value and outstanding custom looks Male mount footpegs (pair)......$ Shifter toe peg (sold each) $28.99 Ali-Baba Footpegs by Paul Yaffe Footpegs and shifter toe peg feature the same quality and attraction as our existing Ali-Baba line of parts. Machined from 6061-T6 billet aluminum and chrome-plated Footpegs (sold in pairs) $ Shifter toe peg (sold each) $41.99 Forks & Shocks Sheetmetal General 3.25 Cross Reference

26 Footpegs Footpegs & Foot Chrome and Ribbed Rubber Pegs Mount to the Original Equipment or aftermarket footpeg clevis on most models. The perfect match to our CC #12900 Handlebar Grips Large, female mount (sold in pairs) $ Large, male mount (sold in pairs) $ Small, male mount (sold in pairs) $ Small, 5/8" female mount (sold in pairs) $ Shifter toe peg (sold each) $ Kicker pedal (sold each) not shown $27.19 Replacement Parts Mount, large female (sold in pairs) $ Mount, 5/8" female (sold in pairs) $ Mount, male (sold in pairs) $ Replacement countersunk bolt (pack of 10) $ Live to Ride Footpegs Chrome-plated, steel footpegs feature replaceable anti-vibration rubber isolation pads with Live to Ride motto Small, male mount (sold in pairs) $ Small, 5/8" female mount (sold in pairs) $ Large, male mount (sold in pairs) $ Large, female mount (sold in pairs) $ Kicker pedal (sold each) $27.69 Replacement Parts Mount, large female (sold in pairs) $ Mount, 5/8" female (sold in pairs) $ Mount, male (sold in pairs) $ Rubbers (small pegs) sold in pairs $ Rubbers (large pegs) sold in pairs $ Rubber (shifter toe peg) sold each $ Rubber (kicker pedal) sold each $ Discontinued Chrome and Rubber Band Pegs Mount to the Original Equipment or aftermarket footpeg clevis on most models. Perfectly match our CC # s and Handlebar Grips Large, female mount (sold in pairs) $ Small, male mount (sold in pairs) $ Small, 5/8" female mount (sold in pairs) $ Shifter toe peg (sold each) $16.29 Replacement Parts Mount, large female (sold in pairs) $ Mount, 5/8" female (sold in pairs) $ Mount, male (sold in pairs) $ Rubbers (large footpeg) set of $ Rubbers (shifter toe peg) set of $ Chrome Spur Pegs Mount to the Original Equipment or aftermarket footpeg clevis on most models. Perfectly match our CC #12169 Handlebar Grips Large, female mount (sold in pairs) $ Large, male mount (sold in pairs) $ Small, male mount (sold in pairs) $ Small, 5/8" female mount (sold in pairs) $ Shifter toe peg (sold each) $15.49 Replacement Parts Mount, large female (sold in pairs) $ Mount, 5/8" female (sold in pairs) $ Mount, male (sold in pairs) $ Replacement countersunk bolt (pack of 10) $ Prices appearing in this catalog are Suggested Retail Price and are subject to change*

27 46021 Footpegs Apparel Bike Kits & Trailers Seats & Bags Accutronix Billet Footpegs Great looking pegs made in the USA from billet aluminum and then flawlessly chrome-plated. They re swaddled in vibration-absorbing rubber to provide a high level of comfort $ Male mount (sold in pairs) Extended O-Ring Footpegs 1"-longer than regular O-ring pegs for more comfort when riding two-up. They match our entire line of O-ring pegs and have replaceable rubber O-rings. Sold in pairs Fit most models from 1971 to present $ Replacement O-rings (pack of 12).$ Oval Ribbed Footpegs Large oval-shaped footpegs provide a more comfortable footrest, and add a nice visual accent. Sold in pairs Male mount $ Female mount $ /8" female mount $51.99 Foot Hand Lighting Electrical Custom Chrome Mini-Rib Footpeg and Grip Sets Mirage or Inferno, Rick Doss Speed Line or Eclipse - pick your pegs and grips to match other accessories and get just the look you want. Distinctive mini-rib designs look great with one-piece designer caps integral with the slotted frame that holds shock-absorbing ribbed rubber inserts. Sold in pairs (except shifter peg). Exhaust Intake Engine Male Large Peg Male Small Peg Female Large Peg Female Small Peg 5/8" Female Large Peg 5/8" Female Small Peg Shifter Peg Grip Set Gaskets $ $ $ $ $ $ $ $32.89 Tranny & Clutch Mirage Driveline Inferno n/a n/a n/a $45.49 n/a $45.49 n/a $34.89 Wheels, Tires & Brakes Frames Rick Doss Eclipse n/a n/a $ $ $ $45.49 n/a n/a Forks & Shocks n/a $ $ $ $ $ $ $31.39 Sheetmetal Rick Doss Speed Line General 3.27 Cross Reference

28 3 Footpegs & Foot Footpegs Retro Footpegs by KüryAkyn Features the same vibration-absorbing material that is used in the classic Iso-Pegs but with a sleeker tread, and a new, trimmer profile for the body of the footpeg Male mount (sold in pairs) $ Replacement retro footpeg pads (4 pieces) $ Vibra-Kushion Footpegs These state-of-the-art chrome-plated footpegs have an innovative design which provides custom styling and superior comfort. Other features of these pegs include replaceable hollow-core wear-resistant rubber insert cleats and interchangeable steel mounting clevis. Fit most early and late-model bikes. Vibra-Kushion Footpegs (sold in pairs) Small, male mount $ Small, 5/8" female mount $ Large, male mount $ Large, female mount $ Clamp on pegs. Fits 1" and 11/4" frame or engine guard tubing $ Stud mount 1/2" $40.99 Shifter Pegs and Kicker Pedal (sold each) Standard length toe peg $ Extended toe peg (31/2"-long) $ Kicker pedal $35.99 Replacement Parts Mount, large female (sold in pairs)..$ Mount, 5/8" female (sold in pairs)...$ Mount, male (sold in pairs) $ Rubbers (small footpeg) set of 8....$ Rubbers (large footpeg) set of 8....$ Rubbers (shifter toe peg) set of $ Rubbers (kicker pedal) set of $7.99 Note: None of these footpegs or replacement parts are interchangeable with their KüryAkyn Iso-Peg counterparts Dually Iso-Pegs by KüryAkyn With the same vibration-absorbing material used on standard Iso-Pegs, the chrome-plated footpegs have more isolation pads and twice the surface area for extra comfort $ Male mount (sold in pairs) Rubber Footpegs with Chrome Ends Die-cast footpegs with rubber sleeves and chrome ends. Fit a variety of applications including aftermarket highway peg sets Passenger pegs (sold in pairs) $ Shifter toe peg (sold each) $ Pro-One Chrome Footpegs Chrome-plated billet with ball milled detail in one-piece male mount or a unique adjustable design that allows the angle of the foot surface to be adjusted forward or back relative to the angle of the mount. For all models using male mount pegs One-piece pegs $ Adjustable pegs $ Shifter toe peg $ Prices appearing in this catalog are Suggested Retail Price and are subject to change*

29 Footpegs & Stirrups Apparel Iso-Pegs by KüryAkyn State-of-the-art chrome-plated footpegs have an innovative design which provides custom styling and great comfort. Other features include replaceable hollow-core wear-resistant rubber insert cleats and interchangeable mounting clevis. Iso-Pegs may be used on early or late-model bikes. Iso-Pegs Small, male mount (sold in pairs).....$ Small, 5/8" female (sold in pairs)......$ Large, male mount (sold in pairs).....$ Large, female mount (sold in pairs)...$ Shifter toe peg (sold each) $ Shift peg, longhorn. 7/8" longer than standard shift peg with 4 rubbers....$21.49 Replacement Parts Mount, large female (sold in pairs)....$ Mount, 5/8" female (sold in pairs).....$ Mount, male (sold in pairs) $ Rubbers (small footpeg) set of $ Rubbers (large footpeg) set of $ Rubbers (shifter toe peg) set of $4.25 Note: None of the footpegs or replacement parts listed are interchangeable with their Vibra-Kushion counterparts. Bike Kits & Trailers Seats & Bags Foot Hand Lighting Electrical Exhaust Intake Engine Gaskets KüryAkyn ISO -Peg Extenders Extended comfortable ISO -Pegs are the way to get around extended carb/manifolds, hot pipes and open primaries. Extended pegs may reduce cornering ground clearance. Check clearance before and after installation Sold in pairs $39.95 Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Vibra-Kushion Footpeg Stirrups Get more comfort without adding floorboards. These stirrups use our Vibra-Kushion footpegs, and are adjustable so that you get the right amount of heel support. Include male clevis that fit large or small-diameter Vibra-Kushion footpegs $ Set of two Stash Tube Footpeg Chrome knurled footpeg with rubber belting. Threaded end cap unscrews to reveal a 5/8" x 25/8" stash area. See matching grips CC # Sold in pairs Male mount. Fits all FXR, FXWG, and Softail models.....$77.99 Iso-Stirrup Sets by KüryAkyn Chrome-plated stirrups with rubber heel supports adjust to any angle for the comfort and support of floorboards without the bulky look. They re available with large or small-diameter Iso-Pegs or without pegs for those with another preference, and mount to female clevis. Sold in pairs Iso-Stirrups with large-diameter Iso-Pegs.....$ Iso-Stirrups with small-diameter Iso-Pegs.....$ Iso-Stirrups ONLY without footpegs $ Replacement heel rubbers $8.44 Forks & Shocks Sheetmetal General 3.29 Cross Reference

30 Footpegs Footpegs & Foot Also Available in Black Century Passenger Pegs by Billet Concepts Chrome-plated billet aluminum with grippy rubber inserts. Pegs click up and down on spring loaded ball bearings to ensure no flop or rattles Sold in pairs $ Ness-Tech Footpegs Male mount footpegs made of chrome-plated billet aluminum. Sold in pairs Twister $ Twister (black painted) $ Flamed $ Grooved $ Grooved (black painted) $ Knurled $ Diamond $ Diamond Flatband $ Stepped $ Battistini Round Hole $ Battistini Oval Hole $ Replacement Parts Footpeg rubbers (pack of 8).....$ Ness-Tech Shifter Toe Pegs Made of chrome-plated billet aluminum. Sold each Twister $ Twister (black painted) $ Flamed $ Grooved $ Grooved (black painted) $ Knurled $ Diamond Twist $ Diamond Flatband $ Stepped $ Battistini Round Hole $ Battistini Oval Hole $44.95 Replacement Parts Toe peg rubbers (pack of 4)......$7.99 Prices appearing in this catalog are Suggested Retail Price and are subject to change* Chrome Passenger Peg Sets by Billet Concepts Include the mounting clevis for a custom look. They match the pegs used in our forward control kits (see pg 3.07). Fit all applications that use a threaded clevis to mount footpegs. Sold in pairs Rubber belted style $ Ball milled style $149.99

31 Footpegs Apparel Bike Kits & Trailers Seats & Bags Foot Radial Series Footpegs and Brake Pedal Cover Kits designed by Radial Components, LLC Chrome die-cast footpeg kits are made to fit all models with female footpeg mounts from 1965 thru They re available in small and large sizes and feature adjustable male ends which permits them to be rotated to a position that provides maximum comfort Large footpegs (sold in pairs) $ Small footpeg (sold in pairs) $ Shifter toe peg (sold each) $18.49 Brake Pedal Cover Kits Chrome die-cast brake pedal cover kits are available in small and large sizes. Small Cover Kit Fits FX Softail and Dyna Wide Glide models from 1984 thru 2002, and 4-speed FXWG models from 1983 thru $31.99 Large Cover Kit Fits all 5-speed models with floorboards from 1980 thru $40.99 Ness-Tech Torpedo Footpegs Footpegs are 1"-longer than factory units for increased comfort Shifter pegs are slightly longer than stock CNC-machined from billet aluminum Matching handlebar grips and fork legs are also available Chrome-plated Male footpeg (sold in pairs) $ Shifter peg (sold each) $ Replacement footpeg rubbers $ Hand Lighting Electrical Exhaust Intake Engine Gaskets discontinued Tranny & Clutch Doss Eclipse 5-Rib Footpegs Our Eclipse pegs have a 5-rib design with fewer, but wider rubber ribs for a new custom look. They have the Eclipse crescent shape on the ends which match our grips and other Eclipse accessories Large, female mount (sold in pairs) $ Small, male mount (sold in pairs) $ Small, 5/8" female mount (sold in pairs) $49.99 Driveline Wheels, Tires & Brakes Frames Extended Pegs for Forward Longer than the stock pegs by over an inch for additional comfort when air cleaner, or tanks have made pegs difficult to use. Use as passenger pegs to help clear Shotguns or other custom exhaust equipment. Sold in pairs Original Equipment-style $ Chrome end cap style $ Black replacement rubbers $7.99 Forks & Shocks Sheetmetal General 3.31 Cross Reference

32 Footpegs Footpegs & Foot Supreme Legends USA Premium Chrome Billet Footpegs Target end-cap designed to match Legends forward control kits for a clean, integrated look, or they can be used alone. Sold in pairs Three band rubber with male mounts $ Three band rubber with folding female mounts $ JayBrake Footpegs and Shifter Toe Pegs High-quality products made from 6061 T6 billet aluminum that permit you to match all of your bike s footpegs and shifter peg needs. Footpegs Sold in pairs "-diameter Wide Bands male mount footpegs $ "-diameter Full Rubber male mount footpegs $ "-diameter Dove Tail Strips male mount footpegs......$ Full Rubber folding footpegs (mount with 3/8-16" bolts)....$ Wide Bands folding footpegs (mount with 3/8-16" bolts)...$ Dove Tail Strips folding pegs (mount with 3/8-16" bolts)....$ Shifter Toe Pegs Sold each Full Rubber $ Wide Bands $ Dove Tail Strips $ Supreme Legends USA Chrome Billet Footpegs Folding pegs for forward controls are also adaptable to mounting to any flat surface. Folding passenger pegs are available with straight or angled mount in standard male design. Sold in pairs Folding driver footpegs $ Angle mount passenger pegs $ Straight mount passenger pegs $77.00 Stock Replacement Large Diameter Footpegs Steel peg set with rubber covers. Fits FL models from 1941 thru 1984, FX models from 1971 thru 1985 (except FXST and FXWG models), and Sportster and K models from 1954 thru Sold in pairs Footpeg set (replaces OEM ) $ Replacement rubbers (replaces OEM T) sold in pairs...$ Prices appearing in this catalog are Suggested Retail Price and are subject to change*

33 Footpegs & Footpeg Kits Apparel Bike Kits & Trailers Seats & Bags Retractable Passenger Footpegs by KüryAkyn Provides the passenger with an alternate footrest by moving the pegs up and forward. Folds back out of the way behind the passenger floorboards when not in use. Includes Iso-Peg footpegs. Sold in sets $ Fits all Touring models from 1993 thru Adjustable Passenger s Footpeg Kit for FXR and Softail Models Designed to bolt to the passenger footpeg mounting point on all FXR models. Permits pegs to be rotated in a 360 arc. Kit includes everything for installation (except footpegs) and features chrome-plated components $ Fits FX Softail and FLST models from 1984 thru 1999, and FLSTC models from late 1987 thru 1989 (1990 thru 1999 FLSTC should use CC #09903) Fits all FXR models from 1982 thru 1994 and FLSTC models from 1990 to present Note: Passenger footpegs are not included in the kit Foot Hand Lighting Electrical Exhaust Intake Engine Gaskets Passenger Pegs for FX Models Replacement peg sets with chrome ends (replaces OEM A) Rubber peg set (sold in pairs)...$ Vibra kushion peg set $ Chrome O-ring peg set $36.49 Chrome Rear Footrest Bracket Sets Replacements for the rear brackets on 4-speed FX models thru 1981, or can be used to replace the 1982 and later one-piece welded and stamped rear footrest brackets, and the large aluminum rear brackets fitted to 4-speed FL models from 1977 thru Left and right brackets alone (1/4" steel plate) $ Bracket set (includes supports and mounting hardware) $33.49 Adjustable Footpeg Kit for Models with Forward Fits into the female footpeg clevis on models with forward controls. Pegs may be rotated in a 360 arc. Kit includes everything necessary to make the conversion (except footpegs) and features flawless chrome-plating on the individual components $ Fits Dyna Wide Glide, FX Softail and 4-speed FXWG models from 1983 to present Note: Passenger footpegs are not included in the kit. Adjustable Passenger Footpeg Mounting Kit Chrome steel footpeg kit permits you to bolt footpegs to the swingarm pivot bracket on Touring and FXR models where floorboard mounting brackets have traditionally been installed. Permits the footpegs to be rotated in a 360º arc providing a wide range of adjustment. Includes chrome-plated left and right-side pivot brackets, extensions, adjustable bracket and arm, clevis and all necessary hardware for installation. Fits all Touring and FXR models from 1980 to present $ Complete kit Note: Passenger footpegs are not included in the kit. Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Forks & Shocks Sheetmetal General 3.33 Cross Reference

34 Footpeg Kits Footpegs & Foot Highway Peg Kits Beautiful show-chrome fold-up footrests for comfortable cruising in style. Include all hardware necessary for easy installation. Note: These peg sets should not be used under normal stop-and-go operating conditions. For 4-speed Big Twin Models from 1958 thru 1985 (except 4-Speed FXWG and Softail Models) Note: Models without the factory-installed right-side frame mounting tab must install a CC #17503 Weld-On Frame Tab O-ring style $ Wing style $40.99 For FXR Models from 1982 thru O-ring style $ Wing style $ For Sportster Models Models from 1952 thru O-ring style $ Wing style $40.99 Models with Generator from 1982-Early O-ring style $ Wing style $42.49 Colony Acorn Highway Peg Mounting Kit Extended acorn studs simplify installation of highway pegs Fits Sportster models from 1957-early $ Clamp-On Footpeg Sets Clamp-on footpeg kits with three different styles of footpegs come complete with three-piece chrome frame clamps in 1", 11/8" or 11/4" diameters. The 1" kits will fit most aftermarket frames, and the 11/8" kits fit most 4-speed or Softail frames and 1957 thru 1981 Sportster models, as well as Original Equipment highway bars. The 11/4" kits will fit all Sportster frames from 1982 to present and all 5-speed frames. 1" 11/8" 11/4" with O-ring pegs $ with Iso Pegs $ with rubber pegs $49.99 Chrome Highway Peg Brackets for Dyna Glide Models The perfect addition to Dyna Super Glide models or to replace stock mounts on all mid-shift Dyna Glide models from 1991 to present. Includes brackets, footpeg mounts and hardware $ Replaces OEM (sold in sets) Transmission Mount Passenger Peg Bracket for Big Twins Fits Big Twins with rigid frames. Use with any 3/8" stud-mount footpegs $ Sold each Highway Bracket Kit with Lights These chrome highway bracket kits have 12-volt marker lights built into the peg extensions, making you more visible at night. All necessary mounting hardware is included $ Fits FXR models from 1982 thru Fits Dyna Glide models from 1991 thru 1999 Weld-On Frame Tab Weld-on right hand side frame mounting tab for all late model 4-speed Big Twins without the Original Equipment mounting tab. For forward controls $ Sold each Footpeg Anti-Sag D-Clips Take the sag out of droopy male mount footpegs. Replace the Original Equipment D-clips with spring steel D-clips that have a integral shim to put pegs back to a flat and level position $2.05 per pr Card of ten pairs 3.34 Prices appearing in this catalog are Suggested Retail Price and are subject to change*

35 Footpeg Kits Apparel Bike Kits & Trailers Seats & Bags Foot Chrome Midmount Footpeg Kits Provide the rider with an alternate place to rest his feet. These kits include a right-side mounting bracket, a new chrome inspection cover, footpeg clevis, mounting hardware and rubber footpegs with chrome ends. The midmount bracket and hardware are also available without the footpegs or their mounting clevis if footpegs other than those supplied are desired Complete kit with brackets and footpegs for 5-speed FX Softail models from 1986 thru $ Mounting brackets ONLY for 5-speed FX Softail models from 1986 thru 1999 (footpegs not included) $45.83 Note: When used as highway pegs, these footpegs should not be used under normal stop-andgo operating conditions. Mid Foot Control Kit for V-Rod Models by Kosman Specialties Designed to provide a different riding position A preferred position for comfort an sport riding A complete bolt-on kit supplied with all necessary hardware and easy to follow instructions Will only fit with aftermarket exhaust such as Vance & Hines, or Screamin Eagle exhausts will not fit with stock exhaust system The parts are machined out of aircraft grade aluminum alloy with a silver powder-coat finish Fits all V-Rod models from 2002 to present $ Hand Lighting Electrical Exhaust Intake Forward Peg Set for Late Sportster Models Easy-to-install and complete with a pair of chrome O-ring footpegs and all necessary hardware. Fits between the lower front engine mounts $ Fits alternator-equipped Sportster models from late 1984 thru 1997 Note: This peg set should not be used under normal stop-and-go operating conditions. Rear Passenger Peg Set for Sportster Models Special design mounting blocks utilize the threaded lugs in the Original Equipment swingarm, and the pegs provided are our world famous O-ring pegs. Sold in sets $ Fit all Sportster models from 1983 thru 2003 Engine Gaskets Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Forks & Shocks Passenger Peg Kits for Softail Models This kit mounts in the existing tapped holes (1/2"-13) in the frame below the seat to provide an alternate footrest position for the passenger. It fits all Softail models from 1984 thru 1999 however, it is not recommended for use on FL Softail models, due to the width of the stock seats. Includes indexing washers Complete kit with footpegs $ Complete kit w/out footpegs $ Chrome Passenger Peg Kits for Sportster Models Fit Sportster models from 1983 thru Hardware is included Kit with chrome O-ring pegs $ Kit with Comfort Cruise pegs $49.99 Sheetmetal General 3.35 Cross Reference

36 Footpeg Mounts 3 Footpegs & Foot Highway Peg Blocks for Sportster Models When combined with footpegs, these chrome steel blocks provide increased comfort. Include required mounting hardware, and measure approx. 61/2"-long. Sold in pairs $ For alternator Sportster models from 1984 to present (repl. OEM T) Note: Highway pegs should not be used under normal stopand-go operating conditions Chrome Rear Footrest Brackets Replacements for the rear brackets on 4-speed FX models thru 1981, or can be used to replace the 1982 and later one-piece welded and stamped rear footrest brackets, and the large aluminum rear brackets fitted to 4-speed FL models from 1977 thru Left and right brackets alone (1/4" steel plate) $ Bracket set (includes supports and mounting hardware) $33.49 Frame Clamps These chrome investment cast clamps are stronger than aluminum or flat steel clamps. Designed by Radial Components, LLC. Sold each $ "-diameter clamp /8"-diameter clamp Ness 11/4" Clamp-On Peg Mount for Crash Bars Chrome-plated, die-cast design Accepts male mount footpegs Sold in pairs $49.95 Chrome Passenger Peg Mounts Stock replacement for Sportster models from 1983 to present. Perfect for adding rear pegs to these bikes. Sold in pairs $ Replaces OEM T Note: Passenger footpegs are not included in the kit Chrome Footpeg Clevis Universal clevis for most stock or aftermarket footpegs with male shanks. Include hardware. Sold in pairs With female bolt mount $ With male stud mount $ Footpeg bolt, nut and spring clip only (sold each) $ Bullet-Style Footpeg Supports 3/8"-24 Stud Zinc-plated. Fits FL models from 1965 thru 1984 and FX models from 1971 thru $ Replaces OEM (sold each) 1/2"-20 Stud Zinc-plated. Fits FL models from 1941 thru 1964 and FX models from 1971 thru $ Replaces OEM (sold each) 50's Boy Footpeg Extensions Made from cold-rolled steel to fit stock-style footpegs. They may be used to move pegs further from the centerline of the bike, and fit any stock-style female clevis. Footpegs are not included. Sold in pairs $ "-long Chrome Passenger Peg Brackets for Softail Models Install under the stock mounting screws that attach the fender struts to the frame. Designed to relocate the Original Equipment passenger footpegs to a more comfortable position for passengers who lean against the sissybar. Fit all Softail models from 1984 to present.....$ Sold in pairs (footpegs not included) 3-Piece Frame Clamps Chrome-plated, 3-piece design eliminates spreading the clamp to fit over frames. Sold each /8" clamp $ " (repl. OEM T) $ /8" (repl. OEM T).....$ /4" (repl. OEM T).....$ Prices appearing in this catalog are Suggested Retail Price and are subject to change*

37 Footpeg Mounts & Extensions Apparel Bike Kits & Trailers Seats & Bags Foot Hand Chrome Footpeg Extensions for Forward Install in the Original Equipment shifter and brake control brackets, they move your footpegs lower and farther forward. Machined from 3/8"-thick, steel plate. Includes chrome-plated footpeg clevis and hardware.....$ Fits FX Softail, Dyna Wide Glide and 4-speed FXWG models from 1983 to present Note: These peg extensions will reduce ground clearance and increase the distance from the Original Equipment footpegs to the brake and shift controls. Offset Chrome Footpeg Extensions Provide long-legged riders with an inexpensive method of stretching out their legs without moving their controls. They move the footpegs out 31/2" from the centerline of the motorcycle and 2" forward. Fits FX Softail, Dyna Wide Glide and 4-speed FXWG models from 1980 to present....$ Sold in pairs (footpegs not included) Note: These peg extensions will reduce ground clearance and increase the distance from the Original Equipment footpegs to the brake and shift controls. Lighting Electrical Exhaust Intake Engine Gaskets Passenger Footrest Kit for FXR Models 3/8" steel plates that relocate the passenger pegs several inches up and forward, for improved comfort. The brackets can utilize stock footpegs or CC s 1/2" stud-mount footpeg sets (footpegs not included). Includes chrome hardware $ Fits FXR models from 1982 thru 1990 Chrome Billet Footpegs by Jardine These ball-milled chrome billet footpegs have rubber band inserts, and are perfect for highway bars, extra frame-mounted footrests or for any custom application where clamping to 1" to 11/4" inch tubing is desired $ Sold in pairs Passenger Peg Brackets These chrome billet rear footpeg brackets feature ball mill design and a sloped contoured shape. They extend the rear pegs further forward providing the passenger with a more comfortable ride $ Fits all Softail models from 1984 thru 1999 or custom applications Footpeg Anti-Sag D-Clips Take the sag out of droopy male mount footpegs. Replace the Original Equipment D-clips with spring steel D-clips that have a integral shim to put pegs back to a flat and level position....$2.05 per pair Card of ten pairs Replacement Footpeg Bars Chromed steel bars for 5/8" female mount footpegs. Includes a 3/8"-16 x 3/4" grade 5 chromeplated bolt and lockwasher. Use as replacements for broken pegs. Sold each "-long $ "-long $ "-long $11.14 Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Forks & Shocks Sheetmetal General 3.37 Cross Reference

38 Shift Linkages Footpegs & Foot Shift Linkages by Paul Yaffe Originals Perfect addition to your custom bike Carved from 6061 T-6 aluminum and then beautifully chrome-plated Available in 2 styles Fit all 5-speed Softail models from 1986 to present (except FLSTS models from 1997 thru 2003) Sold each $ Groovy Missing Link Holy Missing Link Chrome Shift Linkage Measures 103/4"-long with 5/16"-24 threads, and is chrome-plated. Fits Dyna Wide Glide and 5-speed Softail models with forward controls from 1986 to present (except FLSTS models from 1997 thru 2003), as well as other custom applications Complete kit (replaces OEM A) $ Shifter rod ONLY (replaces OEM 11729) $8.34 Landry Shift Linkage by Paul Yaffe Originals This unusual link was originally created from the mind of veteran machinist Brian Landry. It has so many facets that light dances off the beautiful chrome-plating like a diamond ring!....$ Measures 12"-long with 5/16" male heim joints Chrome Steel Shift Linkage by Motherwell Products Quality chrome-plated steel shift linkage is machined with slotted detail on each side. Fits 5-speed Softail models with Original Equipment forward controls from 1986 to present (except 1997 thru 2003 FLSTS models)....$ Sold each Pro-One Chrome Shifter Rods Replaces the Original Equipment shifter rod on all 5-speed Softail models from 1986 to present (except FLSTS models from 1997 thru 2003) $ Ball milled Cut-out style Ball milled, for extended forward controls (3"-longer than stock) Chrome Shifter Linkage Includes gear shifter rod end, shoulder bolt with locknut, shifter rod and clevis. Fits 1971 thru 1973 FX models and 1952 thru 1984 FL foot shift models......$ Complete kit Chrome Shifter Rod Fits all Softail models from 1986 to present (except FLSTS models from 1997 to present) Replaces OEM $8.34 Chrome Rod End Fits all Big Twins from 1937 thru 1966 with hand or foot shift $ Replaces OEMs , Chrome Clevis Pins These chrome-plated clevis pins include the washer and cotter pin. Fits many applications from 1930 to present $ Replaces OEM (pack of 10) Shift and Glow Lighted Shifter Rods by Glow-Job A unique part that will make your bike stand WAY OUT in any crowd! They feature neon lighting on a polished stainless steel shift rod. New heim joints are not even necessary, just use your existing ones to hook the Shift and Glow right up. It's fully adjustable and will make any bike look like a custom masterpiece! They fit all 5-speed Softail models from 1986 to present (except FLSTS models) Yellow $ Green $ Orange $ Red $ Blue $ Purple $ Prices appearing in this catalog are Suggested Retail Price and are subject to change*

39 Shift Linkages Apparel Bike Kits & Trailers Seats & Bags Foot Hand Polished Stainless Steel Shift Linkages for Softail Models by Landmark Adds sparkle to the primary side of your Softail model. Includes easy-toinstall tranny lever cover, aircraft-quality rod ends and custom hardware. Fit 5-speed Softail models with Original Equipment forward controls from 1986 to present (except FLSTS models from 1997 thru 2003) Diamond $ Twisted $ Ball Milled $ Slotted $ Ness-Tech Shifter Rods Chrome-plated billet shifter rods are available in four styles to get the right custom look. They fit stock forward controls on all Softail models from 1986 to present (except FLSTS models from 1997 thru 2003) V style $ See-Thru style $ Round Grooved style $ Flat Grooved style $74.95 Lighting Electrical Exhaust Intake Shift Linkage for Softail Models with Crossover Exhaust by Landmark Top-quality polished stainless steel by Landmark won t peel, pit, chip or discolor. Easy-to-install, includes all hardware $ Fits FLSTS Heritage Springer Softail models from 1997 thru 2003 Death Series Shifter Rods by Thunder Cycle Designs An offspring of the original Death Series Smooth hourglass shape to dress-up your Softail model Machined from billet aluminum with show chrome quality finish Available in 3 different lengths Fit all 5-speed Softail models from 1986 to present (except FLSTS models from 1997 thru 2003) /2"-long $ /2"-long $ /2"-long for 3" extended forward controls $79.95 Engine Gaskets Tranny & Clutch Driveline Small-Diameter Shift Linkages by Landmark Complete sets that include the rod, heim joints, lever shroud and hardware. Available in highly-polished stainless steel versions, or chrome-plated. Features a smaller diameter rod than Landmark s standard round rods. Polished Stainless Steel "-extended for all 5-speed Softail models (except FLSTS) from 1986 to present (133/4"-long) $90.34 Chrome-Plated Fits all 5-speed Softail models (except FLSTS) from 1986 to present (103/4"-long) $ "-extended for all 5-speed Softail models (except FLSTS) from 1986 to present (133/4"-long) $ "-extended for all 5-speed Softail models (except FLSTS) from 1986 to present (143/4"-long) $ Fits all Dyna Wide Glide models from 1993 to present $55.99 Hi-Lo Smooth Diamond Polished Stainless Steel Shift Linkages for Softail Models by Landmark Manufactured from aircraft-quality stainless steel and polished to shine like chrome. Each kit includes the hardware and heim joints. Lengths are measured from eye-center to eye-center. Fit all 5-speed Softail models from 1986 to present (except FLSTS models from 1997 thru 2003)...$ Smooth Hi-Lo Diamond Wheels, Tires & Brakes Frames Forks & Shocks Sheetmetal General 3.39 Cross Reference

40 3 Footpegs & Foot Shift Levers discontinued Girder Shift Lever by KüryAkyn Not only is this shift lever hot looking, it also provides increased leverage for easier, more precise shifting. Includes slide in cover to hide the OEM shift spline. Fits Softail, Dyna Glide and FXR models from 1982 to present....$ Girder shifter arm Chrome Brake Pedal and Shift Lever for Floorboard Models Upgrade your Original Equipment brake and shift controls with these beautifully-crafted aluminum designs from Billet Concepts. Fits FL Softail models from 1986 to present and 5-speed Touring models from 1997 to present...$ Sold in sets Shifter Shaft Cap Use this chrome plated cap to cover the shifter shaft when installing forward controls. The cap is held in place with a flush mount sockethead screw. Fits FX, FXR and Dyna Glide models with mid-shift, and wrench is included $ Sold each Chrome Shift Rod Spherical Joint Improves the looks of shifter linkages. Fits all Softail models from 1986 thru 1996, most aftermarket forward control sets and many early models. Sold each $ Replaces OEM Chrome Shift Levers Fits all FXR models from 1982 thru 1994 (repl. OEM T) $ Fits FL models from 1974 thru 1984, and FXWG models from 1980 thru 1986 with splines (repl. OEM )...$ Fits all FL models from 1965 thru 1984 with splined shafts (repl. OEM TA) $ Fits all FX models 1974 thru 1985 with thru-the-case shifters, and all Dyna Glide and Softail models (except FL Softail models) from 1986 to present (repl. OEM TA)....$ Outer lever for FLT, FLHT, FLHS and Road King models from 1983 thru 1999, and FL Softail models from 1986 to present (repl. OEM ) $ Fits all 5-speed Evolution Sportster models from 1991 to present (repl. OEM T) $ Fits Evolution Sportster models from 1986 thru 1990 (repl. OEM TB) $ Fits Sportster models from 1977 thru 1985 (repl. OEM T) $ Fits Sportster models from 1955 thru 1974, and early Big Twin models without splined shafts (repl. OEMs TA, ) $ Polished shift lever for Sportster models from 1975 thru 1976 (repl. OEM ) $ Chrome Shifter Shafts Chrome-plated shifter shafts to replace the stock parts on Big Twins from 1970 to present. Fits all 4-speed FL models from 1974 thru 1984 with splined shafts $ Replaces OEM A Fits 5-speed FXR models with diaphragm clutch from late 1984 thru Replaces OEM $30.09 Fits FXWG and FX Softail models from late 1985 thru Also popular when removing heel/toe shifters on Fat Boy and Heritage Softail models. Splined shaft shoulder bolt type Replaces OEM $15.49 Fits FL Softail models from 1990 to present Replaces OEM B $24.49 Retaining ring for the shift arm on 4-speed models from 1965 thru $ Replaces OEM (pack of 10) 3.40 Prices appearing in this catalog are Suggested Retail Price and are subject to change*

41 Heim Joints & Toe Pegs Apparel Bike Kits & Trailers Landmark Heim Joints Aircraft-quality rod ends ensure durability and smooth shifting. Replace most heim joints with 5/16"-24 right hand threads. Sold each Stainless steel.....$ Chrome $24.49 Chrome Heim Joints These flawlessly-plated units can serve a variety of uses, particularly when fabricating custom shift and brake linkages. The 5/16" heim joints are available with right and left hand threads to make links that are adjustable without disassembly. Made in the U.S.A. Sold each $ /4" x 1/4-28 female /16" x 5/16-24 male /16" x 5/16-24 female /16" x 5/16-24 male (left hand thread) /8" x 3/8-24 female Chrome Shifter Rod End Replacement chrome shift rod end for Softail models from 1984 to present, 4-speed FXWG models from 1980 thru 1986 and Dyna Glide models from 1991 thru Also great for custom linkage applications using 5/16"-24 threads (replaces OEM )....$ Sold each Foot Clutch for Big Twins Chrome reproduction of the rocker style foot clutch assembly found on hand shift Big Twins from 1965 thru Ideal for vintage restoration or foot clutch/hand shift conversions on 4-speed Big Twins from 1941 thru Works with steel or aluminum primary covers when appropriate clutch releasing lever and rod is used (replaces OEM A) Foot clutch assembly only, clutch rod not included $ Note: Use CC #19079 releasing lever and CC # rod with tin primary. Replacement Parts Rod end (replaces OEM ) $ Clutch rod for tin primaries (replaces OEM ) $ Clutch rod with rod end and jam nut for aluminum primaries (replaces OEMs , and 7638) $ Spring (replaces OEM ) $ Pivot bearing cover (replaces OEM ) $15.49 Seats & Bags Foot Hand Lighting Electrical Exhaust Intake Engine Discontinued Gaskets Shift Rod and Heim Joints This is the Original Equipment part with chrome-plating. Fits all 4-speed FX models (except FXWG and Softail models) from 1974 thru The stock hardware keeps it in place......$ Replaces OEM Tranny & Clutch Driveline Death Series Smooth Shifter Pegs by Thunder Cycle Design The original Death Series CNC-machined from billet aluminum with show chrome quality Enhances your custom bike like no other Includes 5/16" mounting bolt for installation "-long (sold each) $ "-long (sold each) $49.95 Shifter Toe Pegs Wide selection of toe pegs in the market from stock to custom. Sold each Black rubber toe peg with chrome end cap and short stud.....$ Stock replacement black rubber toe peg with short stud (repl. OEM T) $ Stock replacement black rubber toe peg with long stud (repl. OEM T) $ Round O-ring toe peg (repl. OEM T) $9.49 Replacement O-Rings Fits CC #19955 (repl. OEM T) $6.69 Wheels, Tires & Brakes Frames Forks & Shocks Sheetmetal General 3.41 Cross Reference

42 Shifter Brackets/Covers & Brake Pads 3 Footpegs & Foot Shift Lever Brackets Made from heavy-gauge steel with added support plates in the peg mount area for superior strength and styling. Does not crack like the Original Equipment item or other aftermarket parts. Beautifully polished and chrome-plated, and complete with bushing and zerk fitting installed, ready for use Fits 4-speed FL models from 1970 thru 1984 (repl. OEM ) $ Fits FL Softail models from 1990 thru 1999 (repl. OEM A).....$46.99 Shifter Anti-Rattle Kits Tighten up that rattling shifter arm. Bushing and washer kit helps to tighten up loose shifters Fits floorboard-equipped 5-speed models with heel/toe shifters from 1980 to present $ Fits 5-speed FX Softail models from 1986 thru $ Fits 5-speed Touring models from 1980 to present when converting from heel/toe shifter to toe shifter.....$ Fits FL Softail models from 1986 thru 1999 when converting from heel/toe shifter to toe shifter.....$21.49 Doss Brake Pedal Cover Replaces the Original Equipment rubber pad. Chrome-plated steel with protruding rubber ribs looks great by itself or with matching Doss floorboard pads $ Fits FL Softail models from 1986 to present and FLT, FLHT, FLHS and Road King models from 1983 to present Matching Floorboard Covers Matching styling in a chrome-plated billet floorboard covers with rubber tread inserts. Includes 8 new rubber isolation bumpers $ Fit all Original Equipment or aftermarket rectangular floorboard bases Chrome Shifter Support Bracket This custom shifter bracket fits 4-speed FL models from 1952 thru Also may be used as a forward control bracket on 4-speed FX models from 1971 thru $ Replaces OEM Doss Shifter and Kickstand Bracket Cover Durable stamped steel construction and ribbed accents cover the Original Equipment bracket and minimize the cluttered look $ Fits all FL Softail models from 1989 thru 1999 Note: Will not work with Original Equipment highway bars. Chrome Steel Shifter Bracket Fits FX Softail models with peg style forward controls from 1990 thru $ Replaces OEM A Chrome Shifter Support Bracket This heavy duty bracket features a built-in footpeg mount and chrome finish. Works with large or small diameter spade mount footpegs. Fits FXWG models from 1980 thru 1986 and FX Softail models from 1984 thru Replaces OEM $ Prices appearing in this catalog are Suggested Retail Price and are subject to change*

43 Brake Pedals & Pads Apparel Bike Kits & Trailers Seats & Bags Foot KüryAkyn ISO Brake Pedal Pad for Touring and Softail Models Replaces the stock pad with a larger, more comfortable footing surface. Fits FL Softail and 5-speed Touring models from 1980 to present Brake pad kit $ Replacement rubber pads...$ Regency Multi-Position Extended Brake Pedals The ultimate brake pedal! Extended length allows more room for your foot and offers increased leverage for extra braking power. Unique adjustable feature allows multi-positioning for maximum comfort. For use with floorboard models $ Fits all FL Softail models from 2000 to present Fits all FL Softail models from 1991 thru 1999 and Touring models from 1997 to present Hand Lighting Electrical Exhaust Intake Engine Gaskets KüryAkyn ISO Brake Pedal Pads for Softail Models Provides additional brake pedal surface area and matches ISO pegs. Fits FX Softail and Dyna Wide Glide models from 1984 to present, and 1983 thru speed FXWGs Standard $ Longhorn (25% larger) $23.64 BEFORE Tranny & Clutch Driveline Wheels, Tires & Brakes AFTER Frames Brake Pedal Pads Fits FX Softail and Dyna Wide Glide models from 1984 to present, and 1983 thru speed FXWGs Slotted $ Diamond $22.99 Stock Look Extended Brake Pedals by Walter s Workshop The extra length provides more room for your foot and extra braking power. Made of chrome steel. Accepts Original Equipment and aftermarket pedal pads. Sold each $ Fits Softail models with floorboards from late 1987 thru Fits Softail models with floorboards from 2000 to present Fits all Touring models with floorboards from 1997 to present Forks & Shocks Sheetmetal General 3.43 Cross Reference

44 Brake Pedals & Pads Hydraulic Brake Pedal for FL Models A chrome-plated pedal for FL models from 1973-early $ Replaces OEM A 3 Footpegs & Foot Brake Pedal Rubber Replacement black rubber for the brake pedal on all early 4-speed FL models $ Replaces OEM T (sold each) Brake Pedal Pad Replacement pad for FX Softail and Dyna Wide Glide models from 1984 to present, and 1983 thru speed FXWGs $ Replaces OEM T (sold each) Late Hydraulic Brake Lever Plate Fits FL models from 1973-early $ Replaces OEMs , A Chrome Brake Pedal Nut Cover Hide the ugly nut and washer on floorboard brake pedals. Chrome-plated cover installs easily $ Fits FL Softail models from 1986 to present Hydraulic Brake Stop Fits the master cylinder on 4-speed FL models from 1970-early 1979 and FX models from 1971-early $ Replaces OEM T Chrome Hydraulic Brake Pedal and Backing Plate Fit FL models from late 1959 thru Brake pedal (repl. OEM ) $ Pedal backing plate (repl. OEM ) $38.39 Brake/Master Cylinder Springs Brake shoe return springs. Fits all Sportster mechanical brakes and 1949 thru 1971 Big Twin front brakes only $ Replaces OEM ) (sold in pairs) Chrome hydraulic brake pedal return spring. Fits 1958 thru speed Big Twins.....$ Replaces OEMs , ) (sold each) Brake Pedal Pad Kit Provides you with you a larger, easier-to-use rear brake pedal. Fits most Big Twin models from 1965 thru Kit (replaces OEM TA)....$ Brake pedal rubber only (replaces OEM ) $4.29 Brake Pedal Return Spring Chrome-plated return spring with rubber-coated ends to prevent scratching. Fits all FX models from late 1972-early $ Replaces OEM Prices appearing in this catalog are Suggested Retail Price and are subject to change*

45 Master Cylinders & Accessories Apparel Bike Kits & Trailers Seats & Bags Foot Hand Master Cylinder and Brake Pedal Pivot Cover Kit Dress-up the industrial look of the rear master cylinder and brake pedal pivot with chrome-plated stamped steel cover kit Two-piece kit for FX Softail models with Original Equipment forward controls from late 1987 thru 1999 (banjo bolt in the master cylinder) $ Lighting Electrical Exhaust Intake Chrome Brake Rods and Rod Clevis Foot pedal brake rod 10"-long (front). Fits 1937 thru 1957 Big Twins (replaces OEM ) $ Rear brake rod 23"-long. Fits 1937 thru 1957 Big Twins (replaces OEM ) $ Short clevis for foot pedal brake rod. Fits 1937 thru 1957 Big Twins (replaces OEM ) $ Long clevis for foot pedal brake rod. Fits 45s from 1935 thru 1952, 1937 thru 1957 Big Twins and 1934 thru 1950 Servi-Cars (replaces OEM ) $ Rear brake rod and clevis 225/16"-long. Fits Sportster and K models from 1952 thru 1966 (replaces OEM ).....$ Rear brake rod and clevis 237/8"-long. Fits Sportster models from 1967 thru 1974 (replaces OEM ) $ Brake rod adjusting nut. Fits Sportster and K models (except XLCR) from 1952 thru 1978 (replaces OEM ) $ Chrome Late-Model Rear Master Cylinders Chrome-plated reproductions of the 5/8"-bore Original Equipment units with the ribs polished off before plating. The units for 1987 to present models also feature custom top covers Fits Sportster models from 1982-early 1987 and FL Softail models from late 1986-early 1987 (repl. OEMs A, ) $ Fits Sportster models from late 1987 to present (repl. OEM B) $ Fits FL Softail models from late 1987 thru 1999 (repl. OEM D) $ Replacement cartridge assembly for CC # s 25909, (repl. OEM A) $ Rebuild kit for CC # $13.99 Engine Gaskets Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Reproduction Brake Parts Long-obsolete parts are beautifully chrome-plated to help keep that vintage iron running and on the road Front mechanical brake rod for UL, EL, and FL models from 1937 thru 1957 (replaces OEM CH) $ Clevis kit with clevis, pin, washer, cotter and nut for front mechanical brake rod on rigid Big Twins from 1937 thru 1957 (replaces OEM CH) $ Rear mechanical brake rod for UL, EL and FL models from 1937 thru 1957 (replaces OEM CH) $ Clevis kit with clevis, pin, washer, cotter and nut for rear mechanical brake rod on rigid Big Twins from from 1937 thru 1957 (replaces OEM CH).....$ Forks & Shocks Sheetmetal General Cross Reference

46 Master Cylinders Footpegs & Foot Premium Master Cylinder A complete Wagner-Lockheed master cylinder assembly from the Original Equipment supplier. For hydraulic drum brake applications on FL models from 1958 thru 1972 or FX models from 1971 thru Note: Use only DOT 3 brake fluid. Will fit rear disc brake applications on FL and FX models from 1973-early 1979 if the residual pressure check valve is removed Complete master cylinder (repl. OEM ) $ Imported rebuild kit (repl. OEM A) $ Dust boot for 1958 thru 1969 Big Twins (repl. OEM ) pack of $ Dust boot for 1970-early 1979 Big Twins (repl. OEM ) pack of 5....$ Wagner-Lockheed Type Master Cylinders Fit hydraulic drum brake applications on FL models from 1958 thru 1972 or FX models from 1971 thru 1972, and rear disc brake applications on FL and FX models from 1973-early Master Cylinders For drum brake applications from 1958 thru 1972 (replaces OEM ) Chrome $ Ball burnished $54.49 For disc brake applications from 1973-early 1979 (replaces OEM ) Chrome $ Ball burnished $52.89 Replacement Parts Imported rebuild kit (repl. OEM A) $ Rebuild kit. Fits disc or drum brake applications $ Replacement chrome cap ONLY...$ GMA Chrome Master Cylinders These American-made CNC-machined billet aluminum master cylinders have a 5/8"-bore to produce more pressure and increase stopping power. They re available with Wagner or Kelsey- Hayes pattern mounting holes, and designed to work with GMA and other aftermarket calipers with dual pistons. The brake hose end is tapped to 3/8"-24 NPT and can be adapted to most brake lines (except those with Banjo fittings) Wagner-style mounting holes (staggered) $ Kelsey-Hayes style mounting holes (horizontal) $ Replacement top cover gasket (pack of 5) repl. OEM $18.49 Note: These are custom master cylinders and will not necessarily bolt-up to all Original Equipment components. We recommend only a qualified bike builder install these units. Kelsey-Hayes Type Master Cylinders Chrome reproductions of the Kelsey-Hayes master cylinder. Fits 1980 thru 1981 Sportster models, late 1979 thru 1982 FX models and 1983 FXEs. Kit includes all internal components, boot, cover gasket and chrome top cover Complete 3/4"-bore master cylinder for applications using Original Equipmentstyle rear calipers (repl. OEMs A, A) $ Complete 5/8"-bore master cylinder for custom applications with multipiston calipers $ Replacement master cylinder rebuild kit for CC #26248 (repl. OEM B) $ Replacement master cylinder cap gasket (repl. OEM )......$ Replacement rubber dust boot (repl. OEM ) $10.99 Note: CC #26248 master cylinder may also be installed on 1979 Sportster models if modifications are made to the hard line between the brake tee and the master cylinder. Chrome Rear Master Cylinder Chrome-plated reproduction of the Girling master cylinder fitted to all FX models from 1983-early 1987 (except 1984 FXE). May also be installed on 1982-early 1987 FXR models, but the pipe plug on the back will have to be removed for stop light switch installation $ Replaces OEMs A, A Rear Master Cylinder by Tolle Manufactured especially for the Tolle Disc Brake kits CC # s and Not only is it an attractive matching accessory to the Disc Brake kit, it is recommended by Tolle to really get the most out of your set-up. 13mm bore master cylinder is just over 1/2" diameter- providing more brake pressure than the stock bore master cylinders. Billet aluminum construction, mirror polished with Tolle logo machined into the top cover, smooth rounded bottom Fits late 1979 to present $ Prices appearing in this catalog are Suggested Retail Price and are subject to change*

47 Master Cylinder Rebuild Kits Apparel Bike Kits & Trailers Seats & Bags Late-Model Master Cylinder Rebuild Kits Includes everything needed to completely rebuild stock handlebar master cylinders on models from 1996 to present For 9/16" bore single front disc master cylinder (repl. OEM ).....$ For 11/16" bore dual front disc master cylinder (repl. OEM ).....$17.59 Rear Master Cylinder Mounting Hardware Replacement master cylinder mounting studs to fit FL Softail models from late 1986 thru Sold in pairs (repl. OEM A) $5.44 Rebuild Kit for Kelsey-Hayes Master Cylinders Complete rear master cylinder rebuild kit for all Sportster models from 1979 thru 1981, FL models from late 1979 thru 1984, FX models from late 1979 thru 1983 and FLT/FLHT models from 1980 thru $ Replaces OEM B Foot Hand Lighting Electrical Exhaust Intake Rear Master Cylinder Cartridge Assembly Simplifies rebuilding the master cylinder. Fits Softail, FXR and Sportster models from late 1987 to present and Touring models from 1992 to present $ Replaces OEM A Early Master Cylinder Cover Gasket Fit all models from 1972 thru 1981 (pack of 10)..$13.69 each Replaces OEM Master Cylinder Boots Fits the rear master cylinder on 1980 thru 1981 Sportster models, late 1979 thru 1982 FX models, and 1983 FXE models $ Replaces OEM (pack of 5) Fits the rear master cylinder on most models from 1980-early $ Replaces OEM (pack of 5) Fits the rear master cylinder on Big Twin models from 1970-early $ Replaces OEM (pack of 5) Fits the rear master cylinder on Big Twin models from 1958 thru $ Replaces OEM (pack of 10) Master Cylinder Rebuild Kits for FXR, Dyna Glide and FLT/FLHT Models All the components needed to restore braking performance Rear for all FLT, FLHT and FLHS models from 1987 thru 1992 (repl. OEM ) $ Front for all FLT, FLHT and FLHS models from 1987 thru 1995; FXRT and FXRS models from 1987 thru 1992 and Dyna Glide models from 1991 thru $9.29 Engine Gaskets Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Late Master Cylinder Cover Gasket Fits the rear master cylinder on late 1979 thru 1984 FL and late 1979 thru 1982 FX models, the rear master cylinder on 1977 thru 1981 Sportster models as well as the rear master cylinder remote reservoirs on all Big Twin models from 1982 to present $3.70 ea Replaces OEM (pack of 5) Rear Master Cylinder Rebuild Kits Complete rear wheel master cylinder rebuild kit Fits all Sportster models 1982-early 1987; FX models 1983 thru 1986; Softail models 1984-early 1987 (repl. OEM A) $18.59 Master Cylinder Rebuild Kits Rear master cylinder rebuild kit for all models from late 1987 to present $ Replaces OEM A Forks & Shocks Sheetmetal General 3.47 Cross Reference

48 Master Cylinder Fittings Footpegs & Foot Chrome Brake Line Fittings These brake line fittings are used on handlebar mounted master cylinder and front or rear brake line tees. Fit many models from 1972 thru Sold in packs of Plug 1/8" NPT (repl. OEM ) $ Straight male 1/8" NPT to female 3/8"-24 inverted flare (repl. OEM ) $ right-angle fitting 1/8" NPT to female 3/8"-24 inverted flare. Connects the front brake line to the handlebar master cylinder and brake tee. (repl. OEM ) $22.99 Master Cylinder Spacers Chrome spacers have a 3/8"-diameter hole, are 1/4"-thick and fit between the Wagner-Lockheed style rear master cylinder and its backing plate. Fit all Big Twins from early 1979, and can be used as a universal spacer in other applications $ Replaces OEM (pack of 5) Washers for Banjo Bolts Sealing washers for the front and rear banjo fittings. Sold in packs of $ mm. Fits dual disc handlebar master cylinders from 1982 to present, and brake calipers on most models from 1984 to present (repl. OEM ) mm. Fits all single disc handlebar master cylinders from 1984 to present (repl. OEM ) Chrome Banjo Bolt Kits Replacement items for CC or Original Equipment master cylinders and calipers. Available for most models from 1982 to present. Includes washers. Sold each For 10mm banjo fittings $ For 12mm banjo fittings $ For 10mm banjo bolts with 12mm brake lines $10.99 Goodridge Chrome Double Banjo Bolt This chrome banjo bolt allows 2 banjos to be fitted for dual caliper applications. Use it on front dual disc models to run lines directly from caliper to master cylinder and eliminate T fittings, or on the rear to link two calipers together. 3/8"-24 threads fits most front dual disc master cylinders, rear calipers and rear master cylinders from 1982 to present.....$ Sold each Crush Washers Top-quality washers are made in the USA for the following applications. Sold in packs of Master cylinder for Big Twins from 1983 thru 1989; Sportster models from early 1989 (repl. OEM )....$ Master cylinder for Big Twins from 1984 thru 1991; Sportster models from early 1991 (repl. OEM ).....$ Brake line for Big Twins from 1958 thru 1972 (repl. OEM ) $ Donnie Smith Signature Series Banjo Bolt A highly visible item that s often overlooked by custom builders, this brake banjo bolt is a great place to start your Signature Series collection. Designed not only to look good but, be easy to fasten with a conventional wrench. Available for front and rear applications. Sold each /8"-24 banjo bolt. Fits 10mm banjo on front dual disc master cylinders and rear master cylinders and calipers 1982 to present (repl. OEM )....$ /16"-24 banjo bolt. Fits 12mm banjo on front single disc master cylinders 1983 to present (repl. OEM )....$12.49 Precision Performance Banjo Bolt 3/8"-24 banjo bolt fits 10mm banjo on models from 1982 to present, and includes sealing washers (repl. OEM ) $ Sold each Russell Brake Light Switch Banjo Bolt Features integral threaded 3/8"-24 tap to accept standard brake light switch. Thread switch into banjo and then into master cylinder. Eliminates additional tee for brake light switch $ Sold each 3.48 Prices appearing in this catalog are Suggested Retail Price and are subject to change*

49 Master Cylinder Covers & Plungers Apparel Bike Kits & Trailers Seats & Bags Rear Master Cylinder Cover Chrome stamped steel rear master cylinder cover $ Fits all 5-speed Sportster models from 1991 thru Foot Brake Light Banjo Bolts by Goodridge Combines a banjo bolt with a brake light pressure switch. Great for custom work. Zinc-plated or gold with flexible plastic sleeve covers and 11"-long wiring pigtail. Two sizes available for disc brake applications. Sold each. Gold /8"-24 for 10mm banjo $ /16"-24 for 12mm banjo $19.39 Zinc-Plated /8"-24 for 10mm banjo $ /16"-24 for 12mm banjo $17.79 Donnie Smith Signature Series Brake and Shift Covers These stamped steel covers are designed to fit over the brake or shift brackets on FL Softail models with factory floorboards from 1987 to present. Easy bolt-on application $ Shifter cover Brake cover Hand Lighting Electrical Exhaust KüryAkyn Rear Master Cylinder Cover for Late Sportster Models This chrome-plated die-cast cover completely covers the rear master cylinder and incorporates a fluid level viewing window $ Fits all 5-speed Sportster models from 1991 thru 1999 Intake Engine Gaskets Chrome Master Cylinder Reservoir Chrome-plated A.B.S. plastic reservoir that replaces the black Original Equipment item. Fits Big Twins with late-model reservoir-style master cylinders from 1982 thru Replaces OEM A $ Cover gasket (repl. OEM ) pack of $18.49 Master Cylinder Cover Fits 4-speed FL models from late 1979 thru 1984, FLT models from 1980 thru 1982, FXWG models from 1980 thru 1982, and FL Softail models from 1987 to present $ Replaces OEM T Rear Master Cylinder Cover This chrome cover is a snap to install and will add a custom touch $ Fits all FLHT and Road King models from 1997 thru 1999 Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Forks & Shocks Doss Speed Line Plunger for Softail Models This chrome-plated steel master cylinder plunger features distinctive styling and fits FX Softail models from late 1987 thru $ Sold each Chrome Master Cylinder Plungers Fits all Big Twin models with Wagner Lockheed master cylinders. Sold each $ thru 1969 (repl. OEM ) early 1979 (repl. OEM ) Sheetmetal General 3.49 Cross Reference