Product News VO 2 CAGE FIGHTER AIR INTAKE KIT TRIKE ADAPTER KITS SPOILER WINDSHIELDS FOR OEM BATWING FAIRINGS LIGHTED FAIRING VENT TRIM 2 SEAT BOLT

Transcription

1 Product News SEPTEMBER 2017 VO 2 CAGE FIGHTER AIR INTAKE KIT Designed for maximum airflow to the filter element while providing a custom look Includes washable high flow filter element Features large inlet backing plate and billet venturi Available in a brushed finish For 17 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU TRIKE ADAPTER KITS Kits adapt Dresser-style mufflers to fit 17 Trike models Sold in pairs FOR 17 H D FL TRIKE MODELS Chrome Black SPOILER WINDSHIELDS FOR OEM BATWING FAIRINGS Designed to be looked over, the spoiler windshield diffuses the air stream effectively slowing the flow, without buffeting Made of aircraft-grade Lucite for excellent optics and durability Uses OEM hardware for a perfect fit 76 MM (3 ) COLOR FOR FLHT/ FLHX AND FLHTCUTG MODELS Smoke Ghost Dark smoke 76 MM (3 ) COLOR FOR FLHT/ FLHX AND H D FL TRIKE MODELS Smoke Ghost Dark smoke LIGHTED FAIRING VENT TRIM White DRL with amber turn signals Mounts to s or Installs with included chrome tie wraps Plug and play For Dresser models w/ Batwing fairing 2 SEAT BOLT Polished stainless steel construction Makes for quick installation/removal of seat / 4 20 thread pitch PG. 1 // +49 (0)

2 S&S It s a given that these folks are leaders in performance, design and innovative new products. As you have seen recently, they have a newfound focus on exhausts that your customers are dying to get their hands, eyes and ears on. Be sure to have some in stock. Your customers will thank you EL DORADO TRUE DUAL EXHAUST SYSTEMS Improved power and torque Oxygen sensor location same as stock Includes adapters for wide band oxygen sensors Uses two high-flow cats to increase exhaust flow while providing just the right amount of back pressure for optimum torque FOR FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU MODELS Chrome w/ Tracer end caps Black w/ Tracer end caps Relocation of cats to mufflers reduces heat on rider Produces a deep throaty exhaust note throughout the RPM range Available in show chrome or black ceramic finish J2825 sound compliant Chrome w/ Thruster end caps Black w/ Thruster end caps POWER TUNE DUAL HEADER SYSTEMS Independent dual-look with under the bike crossover Hidden crossover passage between front and rear pipes for maximum performance Full heat shields with 220 coverage FOR FLT/ FLHT/ FLHR/ FLHX/ FLTR MODELS Chrome Includes 18 mm sensor ports and plugs Black header features a Jet-Hot ceramic finish Compatible with style slip-on Dresser mufflers Black ceramic PG. 2 // +49 (0)

3 TUNED INDUCTION AIR CLEANERS Swept forward, two-in-one design rams additional air into the cylinder Natural supercharging effect increases mid-range torque Nearly twice the filter area of a teardrop air cleaner Feature chrome runner and bracket (except where noted), backing plate, filters and hardware For FLHT/ FLHR/ FLHX/ FLTR/H D FL Trike, FXDLS, Softails, FLSTNSE, FXSBSE, FLSTSE models with S&S Single Bore EFI (except models w/ fairing lowers) For 17 FLHT/ FLHR/ FLHX/ FLTR/H D FL Trike, 17 FXDLS, 17 Softail (except models w/ fairing lowers) For 17 Twin Cam w/ stock Delphi EFI (except 17 Touring, 17 FXDLS, 17 Softails) For XL w/ stock EFI 1 Black HIGH VOLUME/HIGH PRESSURE (HVHP) POLISHED BILLET OIL PUMP KIT HVHP oil pumps have a new gear tooth profile with fewer but larger teeth that provides an increased oil volume for both supply and return-side of the pump Supply-side gears are 9% wider than stock Return gears are 28% wider than stock to ensure that the additional volume of oil supplied to the engine is scavenged and returned to the oil tank, reducing the amount of oil in the crankcase breather Pumps are available with a universal cover that has a number of oil feed and return options allowing maximum flexibility for custom installations, while standard has style oil line hookups Kit includes supply gears, return gears, drive shaft, drive shaft keys, drive shaft snap rings, check ball, check ball spring, pressure valve spring, cover screws with O-rings, miscellaneous hose fittings, plugs, screws, gaskets, mounting hardware, oil pump drive shaft gear, oil pump pinion shaft gear, S&S breather gear and shim kit and instructions For Big Twin models BILLET OIL PUMP KITS Kit includes oil pump, universal cover, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball and spring, pressure relief valve and spring, check ball and release valve cover screws with O-rings, breather gear, drive gear, shim kit, miscellaneous hose fittings, plugs, screws and gaskets Pump features a smoother design and pressure relief towers that are 0,300 shorter than the OEM oil pump Accepts 3 / 8 rubber oil lines For Big Twin For Big Twin PG. 3 // +49 (0)

4 PREDATOR SEAT FOR DYNA High-quality automotive-grade vinyl cover Custom-molded polyurethane foam interior for maximum comfort 5 mm ( 3 / 16 ) ABS thermoformed seat base for a perfect fit Rubber bumpers and fully carpeted bottom to protect paint Fits all Drag and most H-D sissy bars Lowers rider 19 mm ( 3 / 4 ) compared to original seat Includes all mounting hardware Measures 28 cm W front x 15 cm W rear x 73,5 cm L overall (11 x 6 x 29 ) PREDATOR SEATS FOR XL High-quality automotive-grade vinyl cover and molded flexible urethane interior for durability and comfort FOR FXD, FXDWG, FLD Smooth Carpeted seat bottom ensures perfect fit without damaging paint Available in smooth pattern Mounting hardware included measures 28 cm W front x 12,5 cm rear x 44 mm H x 68,5 cm L overall (11 x 5 x 13/4 x 27 ) measures 25,5 cm W front x 12,5 cm W rear x 44 mm H x 67,5 cm L overall (10 x 5 x 13/4 H x 261/2 ) FOR ALL XL Smooth FOR XL Smooth OEM-STYLE BRAKE ROTORS High-quality stainless steel construction Design/drill pattern is the same as OEM Works with stock and most aftermarket calipers Sold each DIA. HUB DIA. OEM # FRONT ROTORS For FLHT/ FLHX/ FLTR, FLHR (left) ,8 2,250 ID A For FLHT/ FLHX/ FLTR, FLHR (right) ,8 2,250 ID A For FXST/ FLST, FXS/ FLS, FXCW/C, FXD/ FXDWG, XL ,5 2,250 ID For Big Twin, XL ,5 2 ID REAR ROTORS For FLHT/ FLTR/ FLHX/ FLHR ,8 2,250 ID A/B For FXST/ FLST, FXD/ FXDWG, XL ,5 2,250 ID For FXST/ FLST, FXD/ FXDWG, FXR, XL ,5 2 ID For FX/ FXST/ FXWG, 91 FXD, FXR, XL ,5 2 ID A 1 Solid rotor, not slots/ holes. MAGNETIC DOCKING POINTS COVERS Cover the docking points when detachable accessories are not in use 25,4 mm (1 ) OD Large styles measure 30,2 mm L (1,187 ) with a 24,8 mm ID (0,975 ) and 28,6 mm (1,125 ) inside depth Small styles measure 30,2 mm L (1,187 ) with a 22,7 mm ID (0,895 ) and 28,6 mm (1,125 ) inside depth Short styles measure 19,1 mm L (0,750 ) with a 24,8 mm ID (0,975 ) and 17,8 mm (0,700 ) inside depth Chrome or gloss black finish Sold in pairs LARGE Chrome; repl. OEM # Gloss black; repl. OEM # SMALL Chrome; repl. OEM # Gloss black; repl. OEM # SHORT Chrome; repl. OEM # Gloss black; repl. OEM # PG. 4 // +49 (0)

5 HEAVY-DUTY 32A CHARGING KIT Kit includes an encapsulated magnetic rotor, precision-wound stator and a voltage regulator Features a thick 12,1 mm (0,476 ) center rotor as compared to a 5,6 mm (0,222 ) center OEM rotor NOTE: Not for fuel-injected models For FLT, L84 99 FXST/ FLST, FXD, 84 94/99 FXR w/ 32A system ALTERNATOR ROTOR Features encapsulated magnets in a reinforced steel shell Direct OEM replacement For FLHT/FLHR/FLHX/FLTRX models, CVO Dressers, H-D Trike models (54 amp); repl. OEM # M-EIGHT ENGINE BOLT KITS Includes bolts for clutch cover, transmission side and top covers, starter, timer cover, lifter block, transmission bearing housing, rocker cover, outer primary and crankcase Chrome plated Available with smooth or knurled Allen heads SMOOTH FITMENT KNURLED Engine bolt kit 17 M Eight REAR BRAKE CONTROL BOLT KIT FOR M-EIGHT ENGINES Chrome plated Available with smooth or knurled Allen heads SMOOTH FITMENT KNURLED Rear brake control bolt kit 17 M Eight ELECTRONIC SPEEDOMETER SENSOR Direct replacement for OEM sensor For FXST/ FLST; repl. OEM # PG. 5 // +49 (0)

6 RACE SERIES CHAIN DRIVE CONVERSION CAMCHEST KIT Provides maximum reliability, longevity, peak performance and the coolest engine and oil temperatures obtainable Complete conversion chain drive kits allows owners to update old mechanical style cams and tensioners to new hydraulic tensioner system Kit includes Feuling Race Series high volume oil pump, high flow billet cam plate, REAPER Series 574 camshafts, Race Series hydraulic roller lifters, adjustable pushrods, Timken /Koyo bearings, gaskets, O-rings, hardware, ARP fasteners, washers, moly lube and Loctite Conversion cams use style inner cam journals with outer journals requiring hydraulic chain tensioners, sprockets and chains (must be purchased separately) For Twin Cam (except 06 Dyna Glide) SUPER-DUTY FORGED PISTON KITS New skirt coating technology is applied to the entire thickness of the piston-to-wall clearance for a zero install clearance; coating then abrades in on start-up to hone for the perfect fit per cylinder Skirt coating eliminates piston rock for the best possible ring seal with no piston slap noise Hard anodized crown to aid in heat deflection and to reduce corrosion from alcohol fuels Hard anodized top ring groove eliminates micro welding of the ring to the groove; this maintains a flat and smooth surface for the best ring seal and top ring groove Includes piston, rings, pins and clips FOR TWIN CAM AND TWIN CAM BIG BORE 103 (W/ SCREAMIN EAGLE 95CC HEADS) FOR TWIN CAM AND TWIN CAM BIG BORE 103 BORE 10,0:1 COMP PISTONS (3,875 ) , FOR TWIN CAM AND TWIN CAM BIG BORE 103 BORE 10.5:1 COMP PISTON # (3,875 ) Std FOR BORED TO 110 CU. IN. (W/ SCREAMIN EAGLE 95CC HEADS) BORE 10,0:1 COMP PISTONS (4,00 ) , FOR BORED TO 117 CU. IN. (W/ SCREAMIN EAGLE 95CC HEADS) BORE 10,0:1 COMP PISTONS (4,125 ) , PEAK FLOW FUEL FILTERS Machined from 6061-T6 billet aluminum Filter element is made from pleated 304 stainless steel; filtering down to 10 microns and still flowing 6 gallons a minute Mini filter body measures 1 3 / 4 long; super-mini body measures 7 / 8 long SUPER MINI FILTERS BLACK RED BLUE MINI FILTERS BLACK RED BLUE PG. 6 // +49 (0)

7 ACCUTRONIX The good people at Accutronix have been manufacturing some of the highest quality motorcycle products on the market for about as long as we can remember. Within the past couple years ownership here changed hands. The new owners have invested in nine new CNC machines and a water jet. They have a strong commitment to developing new product and in modernizing the brand. We will be bringing you more here and in the upcoming FatBook TM. Keep watching HEEL SHIFTER ELIMINATORS Machined from 6061-T6 billet aluminum Used to space the toe shift arm outward when removing the heel shifter FOR FLT/ FLHT/ FLHR/ FLTR/ FLHX AND H D FL TRIKES Diamond, chrome Diamond, black Smooth, chrome Smooth, black CLUTCH AND BRAKE LEVERS CNC-machined from billet aluminum with a hard black anodized finish Fully rounded along the finger grooves for comfort Fits models with OEM-style controls Sold each BRAKE LEVER For Big Twin and XL models (except Dressers/H D FL Trike models, Softail and FXDLS) CLUTCH LEVER For Big Twin and XL models (except Dressers/H D FL Trike models, Softail and FXDLS) SPEED CLAMPS Fit 25,4 mm (1 ) OD uprights on many handlebars and risers Provide a solid mount for most stock Harley-Davidson and select aftermarket speedometer brackets Made from CNC-machined 6061-T6 aluminum Sold in pairs COLOR Black Polished M6 CHAIN TENSIONER Automatically adjusts the tension of the primary chain Provides constant and even tension, which improves gear shifting Reduces shifting noise; makes for a smoother ride Extends primary chain life For 17 M Eight PG. 7 // +49 (0)

8 REGULATOR/RECTIFIER New and built to OEM specifications for a high-quality cost-effective replacement Comes with the factory plug ends for an easy install Available in black For FLHT/ FLHR/ FLTR/ FLHX; repl. OEM # SIGNATURE SERIES HORN REPLACEMENT ACCENT Clean design that flows with the angle of the cylinder head Durable ABS construction with signature stainless steel Jim Nasi N logo Installs using included steel mount bracket and factory motor mount bolts NOTE: Requires relocation of the stock horn. FOR FLHT/ FLHR/ FLHX/ FLTRX AND H D FL TRIKE MODELS Chrome Black EXTREME DUTY BATTERY CABLES Flexible #2 gauge, 2000-strand copper wire 180A rating Black rubber-coated cables feature copper-coated tin lugs with glued heat-shrink sleeves to prevent corrosion For 17 M Eight models WIDE GLIDE HEADLIGHT MOUNT Direct bolt-on for early Wide Glide triple trees Constructed from tumbled stainless steel Bracket will not rust and will last the life of your motorcycle For FLH models PG. 8 // +49 (0)

9 RIVCO At Rivco, their Roadshow hauler logs over miles a year to attend races, rallies and other events across the United States, often right alongside our Drag Specialties rigs. It is a great place for riders to learn more about all of their product and how to find them at your dealership. Committed to manufacturing unique high-quality motorcycle accessories, they are also committed to promotion and educating your customers about their incredible lineup. LED DRIVING LIGHT KIT Super-bright lights rated at 3000 lumens Emit pure white light rated at 6000 Kelvin Fit 32 mm (11/4 ) diameter engine guards with or without fairing lowers Waterproof light housings Kit includes pair of 51 mm (2 ) LED lights and 32 mm (11/4 ) mounting clamps, wiring and switch Available in black 11,5 CM (4,5 ) LED SEALED BEAM CONVERSION KIT Includes two LED-105 bulbs, two pigtail connectors and the lens kit Bulbs output a combined 1040 lumens and are rated 6000 Kelvin LED driving light kit For FLT/ FLHT models LED REPLACEMENT FOR H9 AND H11 BULBS Super-bright 4500 lumen output per bulb Nighttime light field is 30% longer and 15% wider than factory bulbs Daylight-white light rated at 6000 Kelvin with no blue tint RFI shielded and produces no radio frequency interference Rated for hour service life Plug-and-play installation using stock reflector and bulb housing Uses half the power of factory Halogen bulb and produces twice the light For FLHR/ FLHX models H-3 STYLE LED REPLACEMENT BULBS Replace H3 Halogen bulbs Output 1200 total lumens (600 per bulb) Use factory housings Pure white light rated at 6000 Kelvin, no blue or yellow tint Rated for hour service life Sold in pairs For pre 06 models with replaceable bulbs PG. 9 // +49 (0)