HI-OUTPUT GRENADES 2-INTO-2 EXHAUST SYSTEMS

Size: px

Start display at page:

Download "HI-OUTPUT GRENADES 2-INTO-2 EXHAUST SYSTEMS"

Juliana Mason
6 years ago
Views:

1800-1765 1800-1767 HI-OUTPUT GRENADES 2-INTO-2 EXHAUST SYSTEMS Feature mild steel 4" three-step muffler bodies, 1.75" headpipes and 2.

or 18mm O 2 sensors NOTE: Require removal of passenger footpegs. NOTE: Will not fit models with saddlebags.

95 1800-1767 Chrome w/ black end caps 749.95 1800-1768 Black w/ pearl/nickel end caps 799.95 FOR 06-15 FXD/FXDWG 1800-1769 Chrome w/ chrome end caps 749.

95 FOR 04-15 XL 1800-1761 Chrome w/ chrome end caps 749.95 1800-1762 Black w/ black end caps 799.95 1800-1763 Chrome w/ black end caps 749.

1 HI-OUTPUT GRENADES 2-INTO-2 EXHAUST SYSTEMS Feature mild steel 4" three-step muffler bodies, 1.75" headpipes and 2.25" heat shields CNC machined billet end caps Available in all chrome, chrome wtih black tips, all black, or black with pearl/nickel end caps Super bung technology; will accept 12 or 18mm O 2 sensors NOTE: Require removal of passenger footpegs. NOTE: Will not fit models with saddlebags FOR FXS, FXST, FLS, FLST (EXCEPT 09 FXSTSE, FXCW/C, FXSB/SE) Chrome w/ chrome end caps $ Black w/ black end caps Chrome w/ black end caps Black w/ pearl/nickel end caps FOR FXD/FXDWG Chrome w/ chrome end caps Black w/ black end caps Chrome w/ black end caps Black w/ pearl/nickel end caps FOR XL Chrome w/ chrome end caps Black w/ black end caps Chrome w/ black end caps Black w/ pearl/nickel end caps DISCLAIMER: THE CALIFORNIA AIR RESOURCES BOARD ( CARB ) DOES NOT PERMIT THE USE OF AFTERMARKET EMISSION-RELATED PART(S) THAT ALTER THE PERFORMANCE OF OEM EMISSION- RELATED DEVICES UNLESS CARB HAS ISSUED AN EXECUTIVE ORDER, OTHER THAN ON RACING VEHICLES ON CLOSED COURSES. CHECK YOUR LOCAL LAWS AND MANUFACTURER S INFORMATION. dragspecialties.com

1800-1710 1800-1718 1800-1711 MEGACONE TRU-X CROSSOVER 2-INTO-2 SYSTEMS The Tru-X Crossover design is engineered to equalize exhaust flow and back pressure for ultimate performance Deep, rich, smooth

are covered with full-coverage 21/4" heat shields Include 12mm and 18mm oxygen sensor ports with plugs Reduces heat on rider s leg FOR 09-15 FLHT, FLHR, FLHX, FLTR MODELS 1800-1710 Chrome $ 1,199.

95 4" DNT STRAIGHT CAN MUFFLERS WITH AN ACOUSTICALLY TUNED BAFFLE Feature 16-gauge steel construction throughout Specially designed 3-stepped baffle that is acoustically tuned to deliver a unique

95-15 FLT/FLHT/FLHR/FLHX/FLTR models $ 689.

powerful sound quality with performance baffles Include 12mm and 18mm oxygen sensor ports with plugs 13/4" headpipes come with 21/4" full-coverage heat shields CHROME 1800-1718 For 96-15 Softail

2 MEGACONE TRU-X CROSSOVER 2-INTO-2 SYSTEMS The Tru-X Crossover design is engineered to equalize exhaust flow and back pressure for ultimate performance Deep, rich, smooth sound quality with performance baffles Performance gains on stock or highly tuned engines 41/2" chrome or deep black mufflers with innovative custom look gloss black inverted end caps 13/4" headpipes are covered with full-coverage 21/4" heat shields Include 12mm and 18mm oxygen sensor ports with plugs Reduces heat on rider s leg FOR FLHT, FLHR, FLHX, FLTR MODELS Chrome $ 1, Black 1, " DNT STRAIGHT CAN MUFFLERS WITH AN ACOUSTICALLY TUNED BAFFLE Feature 16-gauge steel construction throughout Specially designed 3-stepped baffle that is acoustically tuned to deliver a unique deep and throaty exhaust sound while providing maximum performance Include a new-style billet end cap with internal machined flutes Available in chrome w/ chrome end caps Sold in pairs For FLT/FLHT/FLHR/FLHX/FLTR models $ F-BOMB 2-INTO-1 SYSTEMS Aggressive-looking 2-into-1 performance design 41/2" deep black or show chrome finish muffler with innovative gloss black inverted end cap Deep, powerful sound quality with performance baffles Include 12mm and 18mm oxygen sensor ports with plugs 13/4" headpipes come with 21/4" full-coverage heat shields CHROME For Softail models (except FXCW/C, FXSB/SE) $ For Dyna models w/ mid or forward controls For XL models w/ mid or forward controls BLACK For Softail models (except FXCW/C, FXSB/SE) For Dyna models w/ mid or forward controls For XL models w/ mid or forward controls DISCLAIMER: THE CALIFORNIA AIR RESOURCES BOARD ( CARB ) DOES NOT PERMIT THE USE OF AFTERMARKET EMISSION-RELATED PART(S) THAT ALTER THE PERFORMANCE OF OEM EMISSION-RELATED DEVICES UNLESS CARB HAS ISSUED AN EXECUTIVE ORDER, OTHER THAN ON RACING VEHICLES ON CLOSED COURSES. CHECK YOUR LOCAL LAWS AND MANUFACTURER S INFORMATION. 2

WEGO III DUAL CHANNEL WIDE-BAND EXHAUST GAS OXYGEN SENSOR SYSTEM Versatile tuning aid for all carbureted and fuel-injected engines displays air/fuel ratio (AFR) and logs over two hours data including

display with automatic dimming under low light conditions Built-in USB interface Includes WEGO III dual display unit, two 18mm Bosch LSU 4.2 oxygen sensors, 96" sensor harness, two 18 1.

95 HIGH-PERFORMANCE PISTON KITS 0903-1169 Forged from a high-silicone aluminum alloy to deliver long life and consistent dimensions Wiseco s high-tech manufacturing ensures greater operating strength

2mm steel, positive twist, gas nitrided top ring, 1.2mm cast iron, taper under-hook scraper ring and 2.0mm three-piece, flex-vent oil ring with steel chrome-faced rails) Pistons are made in the U.S.A.

) with 4 3 0903-1170 8" stroke crank (10:1 comp.) 1 $ 463.95 For 99-06 Twin Cam bored to 1596cc (97 cu. in.) 0903-1169 463.95 with 4" stroke crank (10:1 comp.) 1 Not for Twin Cooled models.

base with a gel insert in seating area and covered with a black vinyl cover Available in a full covered version PART # or partially covered with paintable black gel coat Includes mounting hardware

NOTE: Will require relocation and custom mounting of taillight, turn signals and license plate mount. DESCRIPTION SUG. RETAIL FOR 10-15 XL 0804-0568 Partial cover $ 501.95 0804-0569 Full cover 501.

3 WEGO III DUAL CHANNEL WIDE-BAND EXHAUST GAS OXYGEN SENSOR SYSTEM Versatile tuning aid for all carbureted and fuel-injected engines displays air/fuel ratio (AFR) and logs over two hours data including AFR, engine RPM, and a spare 0-5V analog input for sensors such as throttle position or manifold pressure Can be used for on-road or dyno testing Display uses ultra-bright daylight-readable blue LED display with automatic dimming under low light conditions Built-in USB interface Includes WEGO III dual display unit, two 18mm Bosch LSU 4.2 oxygen sensors, 96" sensor harness, two mm weld nuts for exhaust pipe and software CDROM Measures 5.6" L 3.2" W 0.9" H WEGO III w/ AFR display $ HIGH-PERFORMANCE PISTON KITS Forged from a high-silicone aluminum alloy to deliver long life and consistent dimensions Wiseco s high-tech manufacturing ensures greater operating strength and lower expansion at high temperatures Kits include forged pistons with ArmorGlide coated skirts, rings, retainer clips, chrome piston pins and top-end gasket kits Piston kits feature VM-rings (1.2mm steel, positive twist, gas nitrided top ring, 1.2mm cast iron, taper under-hook scraper ring and 2.0mm three-piece, flex-vent oil ring with steel chrome-faced rails) Pistons are made in the U.S.A. WARNING: Wiseco pistons that use VM-rings can only be fitted with Wiseco VM-rings. SUG. DESCRIPTION PART # RETAIL For Twin Cam bored to 1746cc (106 cu. in.) with " stroke crank (10:1 comp.) 1 $ For Twin Cam bored to 1596cc (97 cu. in.) with 4" stroke crank (10:1 comp.) 1 Not for Twin Cooled models BURLY CAFÈ SOLO SEAT/TAIL SECTION Transforms a standard XL into a Café racer Seat pan and rear cowling are constructed from fiberglass Seat features high-density foam base with a gel insert in seating area and covered with a black vinyl cover Available in a full covered version PART # or partially covered with paintable black gel coat Includes mounting hardware and bracket to relocate electronics NOTE: Will require removal of fender struts/supports from the frame. NOTE: Will require relocation and custom mounting of taillight, turn signals and license plate mount. DESCRIPTION SUG. RETAIL FOR XL Partial cover $ Full cover FOR XL Partial cover Full cover FOR XL Partial cover Full cover RUNAROUND SOLO SEATS The lowest, leanest solo seat for Softails 10.5" wide Top covering is made from the highest-quality expanded black vinyl NOTE: FLSTN models will require removal of the seat rail. NOTE: Not intended for use with a passenger seat/pillion pad For FLSTC/FLSTN, FLSTS/C $ For FXST, FLST/C/N (except FXSTD, FLSTN, 07 FLSTF) DISCLAIMER: THE CALIFORNIA AIR RESOURCES BOARD ( CARB ) DOES NOT PERMIT THE USE OF AFTERMARKET EMISSION-RELATED PART(S) THAT ALTER THE PERFORMANCE OF OEM EMISSION-RELATED DEVICES UNLESS CARB HAS ISSUED AN EXECUTIVE ORDER, OTHER THAN ON RACING VEHICLES ON CLOSED COURSES. CHECK YOUR LOCAL LAWS AND MANUFACTURER S INFORMATION. 3

SADDLEMEN From Tour-Pak offerings to saddles, seat pads and more, our friends at Saddlemen continue to develop new products that every rider can use.

We ve brought some of the latest offerings together below. Be sure to have these and others on display where your customers can experience them first-hand.

a combination of progressive density foam and SaddleGel inserts for superior driver and passenger comfort Seat has a perforated, ventilated leather cover for the ultimate in luxurious comfort, feel

backrests (sold separately) 0801-0939 For 14-15 FLHR/FLHX/FLTRX/S, 08-13 FLHT/ FLHR/FLTR/FLHX $ 539.00 0801-0941 For 14-15 FLHTK, FLHTCU, FLHTKSE, FLHTCUTG 539.

00 0801-0934 Matching 97-13 Tour-Pak pad cover 80.

4 SADDLEMEN From Tour-Pak offerings to saddles, seat pads and more, our friends at Saddlemen continue to develop new products that every rider can use. Their wide-range of innovative designs, loaded with in-demand features and premier style, are designed to complement one another across their entire range of products. We ve brought some of the latest offerings together below. Be sure to have these and others on display where your customers can experience them first-hand ROAD SOFA LS SEATS Refined split-cushion design separates the seating surface from the lumbar support to reduce tailbone/back pressure for maximum long-range comfort Seat features a combination of progressive density foam and SaddleGel inserts for superior driver and passenger comfort Seat has a perforated, ventilated leather cover for the ultimate in luxurious comfort, feel and looks Protective rain cover included Passenger pillion area has received special attention for comfort and to allow a clear view of the road ahead Accommodates Saddlemen or Harley-Davidson backrests (sold separately) For FLHR/FLHX/FLTRX/S, FLHT/ FLHR/FLTR/FLHX $ For FLHTK, FLHTCU, FLHTKSE, FLHTCUTG For FLHTCUTG/FLHXXX For FLHR, FLHX For FLT, FLHT, FLTR (except FLHX) Matching Tour-pak pad cover Matching Tour-Pak pad cover ROAD SOFA PT SEATS Refined split-cushion design separates the seating surface from the lumbar support to reduce tailbone/back pressure for maximum long-range comfort Seat features a combination of progressive density foam and SaddleGel inserts for superior driver and passenger comfort Pillowed soft upholstery cover backed by a compliant foam layer under the cover to provide incredible comfort and style Classic styled button-tufted cover Accommodates Saddlemen or Harley-Davidson backrests (sold separately) For FLHR/FLHX/FLTRX/S, FLHT/ FLHR/FLHX/FLTR $ For FLHTK, FLHTCU, FLHTKSE, FLHTCUTG For FLHTCUTG, FLHXXX For FLHR, FLHX For FLT, FLHT, FLTR (except FLHX) Matching Tour-Pak pad cover Matching Tour-Pak pad cover SADDLEGEL COMFORT PADS Visco-elastic SaddleGel pads add riding comfort to any seat on any model Large Easy Reach pads are specifically designed to provide the support needed for longer time in the saddle, yet provide leg clearance so that a person can remain flat footed when stopped Large Easy Reach pads will fit most cruisers and most touring motorcycles Jumbo comfort gel pad is the largest pad of the family and will fit larger cruisers and touring motorcycles Pads available with a soft stretch cover, fleece cover or raw (no cover) for custom applications EASY REACH PADS Soft stretch cover $ Fleece cover Raw no cover JUMBO PADS Soft stretch cover $ Fleece cover Raw no cover

0801-0952 0801-0953 0801-0954 PREDATOR 2-UP SEATS Solar-reflective leather in the seating area and automotive-grade vinyl on the sides; patented process reduces surface temperature by as much as 25 F

base for a perfect fit Rubber bumpers and fully carpeted bottom to protect paint Fit with all Drag and most H-D sissy bars Include all mounting hardware FOR 14-15 FLHT, FLHR, FLTRX, FLHX MODELS

95 0801-0948 0801-0949 0801-0950 0801-0951 PREDATOR SEATS Solar-reflective leather in the seating area and automotive-grade vinyl on the sides; patented process reduces surface temperature by as much

thermoformed seat base for a perfect fit Rubber bumpers and fully carpeted bottom to protect paint Fit all Drag and most H-D sissy bars Include all mounting hardware Black pinstripe stitch detail FOR

5 PREDATOR 2-UP SEATS Solar-reflective leather in the seating area and automotive-grade vinyl on the sides; patented process reduces surface temperature by as much as 25 F for a cooler seat, higher durability and longer life over conventional leather or vinyl Wider seating area and contoured polyurethane foam interior for maximum comfort 3 16" ABS thermoformed seat base for a perfect fit Rubber bumpers and fully carpeted bottom to protect paint Fit with all Drag and most H-D sissy bars Include all mounting hardware FOR FLHT, FLHR, FLTRX, FLHX MODELS (EXCEPT FLHTCUTG, 15 FLRT) (301/2" L 11" W FRONT; 71/2" W REAR) Smooth $ Flame stitch Double diamond stitch PREDATOR SEATS Solar-reflective leather in the seating area and automotive-grade vinyl on the sides; patented process reduces surface temperature by as much as 25 F for a cooler seat, this means higher durability and longer life over conventional leather or vinyl Wider seating area and contoured polyurethane foam interior for maximum comfort 3 16" ABS thermoformed seat base for a perfect fit Rubber bumpers and fully carpeted bottom to protect paint Fit all Drag and most H-D sissy bars Include all mounting hardware Black pinstripe stitch detail FOR FLHT, FLHR, FLTRX, FLHX MODELS (EXCEPT FLHTCUTG, 15 FLRT) (301/2" OVERALL 11" W FRONT 2" H ; 6" W REAR) Smooth $ Mild stitch Flame stitch Black pinstripe stitch Lowers rider 3/4" compared to original seat. 5

41/2" SPOTLIGHTS Available in a chrome or gloss black finish with a clear lens Swivel base mount Include H8 halogen bulb DOT and ECE compliant Sold each 2001-0957 Chrome

95 1/4" NPT PETCOCK Features a three-position switch (on/off/reserve) Chrome plated with filter screen Has a 1/4" fuel outlet; available in straight or 90 style Accept

95 0705-0201 90 fuel outlet 21.95 PIVOT PIN BUSHINGS High-quality replacement bushings Sold in packs of 10 2001-0958 0615-0268 For 04-15 XL (clutch lever only); repl.

) PREMIUM REUSABLE AIR FILTER Durable epoxy-coated wire mesh designed to maximize airflow and provide peak filtration 100% reusable and washable Pre-oiled for quick,

1 air filter 14-15 FLHT/ 1011-3498 1 $ 47.95 FLHR/FLHX/FLTR/FL Trike; repl. OEM # 29244-08 1 Must be used with OEM air cleaner cover.

compatible with OEM lever perches; sold in a set unless noted FOR 14-15 XL 0610-0794 Lever set $ 36.95 0614-0809 Repl. brake lever for PART #0610-0794 (ea.) 19.

6 41/2" SPOTLIGHTS Available in a chrome or gloss black finish with a clear lens Swivel base mount Include H8 halogen bulb DOT and ECE compliant Sold each Chrome $ Gloss black W, H8 HALOGEN HEADLIGHT BULB Standard halogen bulb with a clear glass bulb Sold each Halogen bulb $ /4" NPT PETCOCK Features a three-position switch (on/off/reserve) Chrome plated with filter screen Has a 1/4" fuel outlet; available in straight or 90 style Accept rebuild kit PART # (sold separately; see the Drag Specialties 2015 FatBook) Sold each Straight fuel outlet $ fuel outlet PIVOT PIN BUSHINGS High-quality replacement bushings Sold in packs of For XL (clutch lever only); repl. OEM # $ 1.95 (ea.) PREMIUM REUSABLE AIR FILTER Durable epoxy-coated wire mesh designed to maximize airflow and provide peak filtration 100% reusable and washable Pre-oiled for quick, easy installation High-flow, four-layer surgical-grade cotton filtration Urethane body won t crack or curl like rubber Precision hand-poured design Screamin Eagle Stage 1 air filter FLHT/ $ FLHR/FLHX/FLTR/FL Trike; repl. OEM # Must be used with OEM air cleaner cover. WIDE BLADE LEVER SET Top-quality lever sets resemble the late-style wide, flat design Constructed of lightweight aluminum with a chrome finish Levers are compatible with OEM lever perches; sold in a set unless noted FOR XL Lever set $ Repl. brake lever for PART # (ea.) Repl. clutch lever for PART # (ea.) EASY FIND KICKSTAND EXTENSIONS Extension makes hard-to-reach kickstands easier to operate Include mounting hardware NOTE: Drilling required. CHROME For FLHT/FLHR/FLHX/FLTR $ For FXD/FXDWG BLACK For FLHT/FLHR/FLHX/FLTR For FXD/FXDWG

SPARK PLUG/HEAD BOLT COVERS Available in smooth or finned styles 0940-1318 Comes with mounting hardware Sold as a kit for two heads SUG.

in packs of 10 FOR 08-15 FLHT/FLHR/FLHX/FLTR MODELS 0617-0197 Chrome, clutch side; Repl. OEM #s 11143, 38738-08 $ 4.95 (ea.

) 2030-0874 VOLOLIGHTS: ADVANCED DECELERATION INDICATION 2030-0875 Encourage increased following distances and reduce the risk of rear

CLAMP FOR SPORTSTER 48 Custom upper triple tree allows you to install bushings and risers Greatly expands your custom handlebar

different flash patterns alert drivers to normal deceleration and emergency braking Three sensitivity settings (Sport, Touring and

7 SPARK PLUG/HEAD BOLT COVERS Available in smooth or finned styles Comes with mounting hardware Sold as a kit for two heads SUG. PART # DESCRIPTION RETAIL FOR TWIN CAM MODELS Finned, silver $ FOR XL MODELS Smooth, chrome $ Finned, silver PIVOT PIN/CLIP KITS Replacement pin kit Available with chrome or black-anodized finish Sold in packs of 10 FOR FLHT/FLHR/FLHX/FLTR MODELS Chrome, clutch side; Repl. OEM #s 11143, $ 4.95 (ea.) Black, clutch side 4.95 (ea.) Chrome, brake side; Repl OEM # (ea.) Black, brake side 4.95 (ea.) FOR XL MODELS Chrome; Repl. OEM #s 11379, (ea.) Black 3.95 (ea.) VOLOLIGHTS: ADVANCED DECELERATION INDICATION Encourage increased following distances and reduce the risk of rear end collisions Detect and indicate all methods of deceleration whether engine braking, downshifting or using brake levers TOP TRIPLE CLAMP FOR SPORTSTER 48 Custom upper triple tree allows you to install bushings and risers Greatly expands your custom handlebar installation options Will work with OEM turn signals Gloss black powdercoat finish that won t fade, unlike anodized finishes Two different flash patterns alert drivers to normal deceleration and emergency braking Three sensitivity settings (Sport, Touring and Default) allow user to adjust for motorcycle type and riding style Provide an earlier deceleration indication to reduce risk of rear end collisions Easy installation with only 9-16V and no crimping required Universal fit Use with LA Choppers handlebar angle adapters for the ultimate custom look For XL1200X $ Black $ Carbon fiber Carbon fiber wrap does not contain actual carbon fiber. 7

ACCUTRONIX The good folks at Accutronix have been manufacturing some of the highest quality motorcycle products on the market since 1985.

We ve included some of their latest offerings here. Hot new products that add-to and expand-upon the existing selection we already carry.

conceals the shift shaft Toe shifter is 81/4" and heel shifter is 8" from center of pivot to center of toe peg FOR 84-15 FLHT/FLHX/FLHR/FLTR, 86-15 FLST 1602-0978 1602-0979 1602-0980 1602-0981

8 ACCUTRONIX The good folks at Accutronix have been manufacturing some of the highest quality motorcycle products on the market since These folks will tell you that they are committed to delivering high-end, top-quality craftsmanship in unique custom items that fit right, function flawlessly and of course look great. We ve included some of their latest offerings here. Hot new products that add-to and expand-upon the existing selection we already carry EXTENDED SHIFTER LEVERS Machined from 6061 T-6 billet aluminum Heel-toe shift arm kit replaces the stock H-D shift arms; mounts and adjusts like stock but conceals the shift shaft Toe shifter is 81/4" and heel shifter is 8" from center of pivot to center of toe peg FOR FLHT/FLHX/FLHR/FLTR, FLST Available in chrome or Night Series finish (black anodized and then machined again, yielding a contrast of black and raw aluminum finish) Toe pegs available separately (see 2015 Drag Specialties FatBook) Heel/toe shifter, diamond; chrome $ Heel/toe shifter, diamond; Night Series Heel/toe shifter, slotted; chrome Heel/toe shifter, slotted; Night Series Toe shifter, diamond; chrome $ Toe shifter, diamond; Night Series Toe shifter, slotted; chrome Toe shifter, slotted; Night Series BRAKE ARMS Machined from 6061 T-6 billet aluminum Replaces the stock H-D arm; mount like stock and include a decorative cap to conceal the mounting hardware Brake arm is 93/4" from center of pivot to center of toe peg Diamond and Slotted designs available in chrome or Night Series (black anodized and then machined again, yielding a contrast of black anodized and raw aluminum finish) Toe pegs sold separately (see the Drag Specialties 2015 FatBook) FOR FLHT/FLHR/FLHX/FLTR AND H-D FL TRIKE MODELS Diamond, chrome $ Diamond, black Slotted, chrome Slotted, black FOR FLHT/FLHR/FLHX/FLTR MODELS Diamond, chrome Diamond, black Slotted, chrome Slotted, black FOR FLHT/FLHR/FLHX/FLTR, L87-99 FLSTC, FLSTF, FLSTN, FLSTS MODELS Diamond, chrome $ Diamond, black Slotted, chrome Slotted, black FOR FLST MODELS Diamond, chrome Diamond, black Slotted, chrome Slotted, black

MECHANICAL REVERSE KIT WITH ELECTRONIC CUT-OFF SWITCH Makes parking anywhere possible Constructed from lightweight aluminum, chromed and zinc-plated

not affect forward gear operations Clutch-operated, eliminating any strain on the electrical system Plug-and-play harness, all installation tools and

95 TC3 OIL PUMPS Three stages for consistent pressure and reliable scavenging Separate scavenge sections for flywheel cavity and cam chest (no

run-out without damage 0932-0106 NOTE: S&S oil pumps for 99-06 are not compatible with S&S cam support plates for 99-06 engines.

95 0932-0107 For 99-06 Twin Cam models (except 06 Dyna) 399.

are removable for service Rebuildable bronze pinion shaft bushing in all models and bronze cam bushings in 07-later style NOTE: S&S oil pumps for

0925-0914 0925-0914 For 07-15 Twin Cam and 06 Dyna models $ 349.95 0925-0915 For 99-06 Twin Cam models (except 06 Dyna) w/ Gear Drive Cams 349.

5 1 8" W FOR 84-15 FLT/FLHT/FLHR/FLTR/FLHX AND 09-13 H-D FL TRIKE MODELS; 86-15 FLSTC, 90-15 FLSTF, FLSTN, 12-15 FLD 1621-0668 Gloss black powder

95 FORWARD CONTROLS Race-styled bolt-on forward controls Billet aluminum construction Hard anodized piston for increased performance and wear

9 MECHANICAL REVERSE KIT WITH ELECTRONIC CUT-OFF SWITCH Makes parking anywhere possible Constructed from lightweight aluminum, chromed and zinc-plated Equipped with an electronic cut-off switch to protect transmission from operator error No exhaust modification needed when used with OEM exhaust Does not affect forward gear operations Clutch-operated, eliminating any strain on the electrical system Plug-and-play harness, all installation tools and instructions included For 15 FLHT models $ 1, TC3 OIL PUMPS Three stages for consistent pressure and reliable scavenging Separate scavenge sections for flywheel cavity and cam chest (no interface) Screens and magnetic traps help protect the scavenge rotors from debris Special design allows S&S pumps to tolerate more pinion shaft run-out without damage NOTE: S&S oil pumps for are not compatible with S&S cam support plates for engines. All S&S cam support plates are machined for 07 and later-style oil pumps For Twin Cam and 06 Dyna models $ For Twin Cam models (except 06 Dyna) TC3 CAM PLATE Precision CNC-machined forged aluminum Adjustable oil pressure regulator; adjust without removing plate from the engine Passage plugs are removable for service Rebuildable bronze pinion shaft bushing in all models and bronze cam bushings in 07-later style NOTE: S&S oil pumps for are not compatible with S&S cam support plates for engines. All S&S cam support plates are machined for 07 and later-style oil pumps For Twin Cam and 06 Dyna models $ For Twin Cam models (except 06 Dyna) w/ Gear Drive Cams DRIVER S FLOORBOARDS CNC-machined from billet aluminum Can be adjusted up to 1" forward or back of the stock floorboard position Measure " L 5 1 8" W FOR FLT/FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKE MODELS; FLSTC, FLSTF, FLSTN, FLD Gloss black powder coated, dimpled $ Chrome, dimpled FORWARD CONTROLS Race-styled bolt-on forward controls Billet aluminum construction Hard anodized piston for increased performance and wear resistance Integrated 11 16" bore master cylinder included Folding footpegs, shifter and brake toe pegs included Include stainless steel hardware and kickstand bracket Available in Contrast Cut, Black Ops and chrome NOTE: models require use of kickstand assembly. NOTE: May require custom brake line for proper fit Uses OEM mounting hardware FOR FXST/FLST MODELS Contrast Cut $ Black Ops Chrome

0411-0113 LINDBY CUSTOM You can bet that your riders who are able to throwdown for the latest 2015 ride are going to want more than just a crash bar when it comes to a custom highway bar.

When your customers leave with the latest bike, make sure they leave with some stylish and functional Lindby bars like those you see here.

the Elite line of products including foot controls, windshield trim and bag latches Sold in pairs 0411-0112 FOR 14-15 FLHT, FLHR, FLTRX, FLHX AND H-D FL TRIKE 0411-0115 Chrome $ 489.

10 LINDBY CUSTOM You can bet that your riders who are able to throwdown for the latest 2015 ride are going to want more than just a crash bar when it comes to a custom highway bar. Per Lindby and his wife Anne pride themselves in the design and manufacture of bars that feature superior function and un-matched style. When your customers leave with the latest bike, make sure they leave with some stylish and functional Lindby bars like those you see here. ELITE SERIES FORK SLIDER COVERS 6061 billet aluminum construction with chrome or black-anodized finishes Easily create a custom look by replacing the factory stock fork slider covers Covers complete the Elite line of products including foot controls, windshield trim and bag latches Sold in pairs FOR FLHT, FLHR, FLTRX, FLHX AND H-D FL TRIKE Chrome $ Black w/ remachined accents FOR FLT, FLHT, FLHR, FLTR, FLHX AND H-D FL TRIKE Chrome Black w/ remachined accents ELITE EDGE WINDSHIELD TRIM 6061 aluminum construction is available in either chrome or black-anodized finishes Replaces stock trim on models listed FOR FLHT/FLHTC/FLHTCU/FLHX AND FLHTCUTG MODELS Chrome $ Black FOR FLHT/FLHTC/FLHTCU/FLHX AND H-D FL TRIKE MODELS Chrome $ Black LINBAR FRONT HIGHWAY BARS Bars are made from 11/4" high-strength steel for long-lasting durability Precision bent and welded for a perfect fit every time Neoprene O-rings provide traction in all climates Available in a triple-chrome-plated or gloss black powder-coat finish U.S. Patent #D NOTE: Not recommended for use with extended forward controls or extended floorboards. PART # DESCRIPTION SUG. RETAIL FOR 15 FLTRX/S Chrome $ Black HEDLED HEADLIGHT SYSTEM Billet aluminum housing with a chrome finish LEDs built into the bezel serve as running lights and turn signals LED beam with high/low functions For custom applications Measures 5.9" wide at front by 8.82" long Includes mounting block HEDLED headlight system $

PLUGZ ANTENNA HOLE FILLERS Replace antenna grommet on all Street Glides, Road Glides and Road Glide Customs Available in smoke or red lens Three

2040-1693 Red lens $ 69.95 2040-1694 Smoke lens 69.

1107-0464 NOTE: All 06 Dyna Glide and all 07-15 applications will require the use of gasket PART # 0934-0289 or 0934-0788.

95 FRONT FENDER Composite and fiberglass construction Lightweight yet durable Fits with a 26" wheel; 120/50-26 tire 1401-0494 For 86-13

95 0213-0629 1401-0495 0213-0628 STINGRAY FENDERS This classic style has been brought back from twisted, dilapidated swap meet finds, ready for

choice of raw steel or aluminum Available in 7" width, with a 40" length Radius fits 18" tires, as well as vintage-style 16" tires 1401-0495

11 PLUGZ ANTENNA HOLE FILLERS Replace antenna grommet on all Street Glides, Road Glides and Road Glide Customs Available in smoke or red lens Three super-bright red LEDs Two-wire dual-function system Include two Posi-Taps Sold in pairs FOR FLTR/FLTRX/FLHX/FLHXS Red lens $ Smoke lens PLATINUM SERIES DERBY COVERS 6061 T-6 billet aluminum covers available in either chrome or black anodized platinum-cut finish NOTE: All 06 Dyna Glide and all applications will require the use of gasket PART # or FOR BIG TWIN (EXCEPT FLHTCUL/FLHTKL) Platinum cut, chrome $ Platinum cut, black anodized FRONT FENDER Composite and fiberglass construction Lightweight yet durable Fits with a 26" wheel; 120/50-26 tire For FLHT/FLHR/FLHX/FLTR models $ STINGRAY FENDERS This classic style has been brought back from twisted, dilapidated swap meet finds, ready for mounting on your custom motorcycle The raised center rib, flared duckbill and subtle stamped branding harken an earlier era; available in your choice of raw steel or aluminum Available in 7" width, with a 40" length Radius fits 18" tires, as well as vintage-style 16" tires Steel $ Aluminum SPOOL HUBS Polished and ready to lace up to a 40-spoke front rim Precision-machined 6010-T6 aluminum, with alloy bearing spacer tube and high-quality Japanese wheel bearing installed Large 3" flange diameter increases strength and stability, and accepts a common size 3/4" axle NOTE: Hubs require a set of custom spokes Chopper $ Flat track

TRASK Nick Trask and the team at Trask Performance have quickly become one of the top tuning shops in the country.

Embraced by the media with dozens of motorcycle magazine articles, features and covers, it is easy to see why more and more riders are asking for Trask by name.

CHIN SPOILERS Hand-laid fiberglass construction with a gel coat finish Help fill the gap between the wheel and the front of the frame to add a custom finishing touch to a Bagger Raked (19.

hardware 0504-0271 and grille insert 0504-0271 For 14-15 FLHT, FLHX, FLHR, FLTRX $ 279.95 w/ non-raked front ends 0504-0272 For 98-08 FLT, FLHT, FLHR, FLTR, FLHX w/ raked front ends 279.

FLHT/FLHX/FLHR/FLTRX/H-D FL TRIKES 0411-0108 Chrome $ 369.95 0411-0109 Black 369.95 FOR L84-13 FLT/FLHT/FLHR/FLHX/FLTR/H-D FL TRIKES 0411-0106 Chrome 369.95 0411-0107 Black 369.

12 TRASK Nick Trask and the team at Trask Performance have quickly become one of the top tuning shops in the country. On top of making big power Trask has also made big strides in the design and manufacture of their own line of custom parts and accessories. Embraced by the media with dozens of motorcycle magazine articles, features and covers, it is easy to see why more and more riders are asking for Trask by name. Get some of the latest here and in future catalogs. CHIN SPOILERS Hand-laid fiberglass construction with a gel coat finish Help fill the gap between the wheel and the front of the frame to add a custom finishing touch to a Bagger Raked (19.5" 11" 11") chin spoilers come out further and is for use on FL models that have been raked to accept a bigger wheel; will fit with most oil coolers including OEM and Jagg Include all necessary hardware and grille insert For FLHT, FLHX, FLHR, FLTRX $ w/ non-raked front ends For FLT, FLHT, FLHR, FLTR, FLHX w/ raked front ends V-LINE FORK TUBE COVERS Unique 3D CNC machining using 6061 T-6 aluminum Replace thin factory covers to give your bike a clean, stylish look Sold in pairs FOR FLHT/FLHX/FLHR/FLTRX/H-D FL TRIKES Chrome $ Black FOR L84-13 FLT/FLHT/FLHR/FLHX/FLTR/H-D FL TRIKES Chrome Black MM CUSTOM-COLORED PLUG WIRES Designer plug wire sets come in distinctive, highly visible colors Precut and have the plug/coil boots and terminals already installed Boots and wires are made from extra-high-temperature silicone, which gives protection up to 600 F FOR 15 XG500/750 PART # DESCRIPTION SUG. RETAIL Black $ Red Purple Yellow Spiro-Pro core provides up to 10 times the conductivity of a standard carbon-core wire Low resistance means they run cooler and last three to four times longer than carbon-core wires Sold in pairs PART # DESCRIPTION SUG. RETAIL Blue $ Pink Orange Green SELF-REGULATING LOAD EQUALIZER Compatible with all H-D factory security systems Won t overheat Plug-n-play when used with Küryakyn Panacea taillight, run/turn/brake controller or load equalizer adapters Can also be spliced in custom applications For H-D models (except Softail and Dynas) equipped w/ electronic TSM or TSSM $ LOAD EQUALIZER ADAPTER Allows splice-free installation of Küryakyn load equalizers equipped with 3-pin connectors Sold each For FLHX/FLTRX models $

APRIL 2016 dragspecialties.com

APRIL 2016 dragspecialties.com dragspecialties.com TECHNO RESEARCH Just about a year ago we welcomed Techno Research onboard with their unique tuning and diagnostic products available for any size shop and service level. We know many