HOT LEGS FORK LEG SETS SADDLEBAG LATCH KIT SEPTEMBER 2012

Size: px

Start display at page:

Download "HOT LEGS FORK LEG SETS SADDLEBAG LATCH KIT SEPTEMBER 2012"

Hope Joseph
5 years ago
Views:

SEPTEMBER 2012 ARLEN NESS You will now find three generations of this motorcycle family lending their expertise to parts and accessories that bear one of the most recognizable names in custom Ness.

headquarters. Be sure to have plenty of Ness on hand when your customers come asking for it by name.

either chrome or black anodized Accept all internal OEM components Sold in pairs FOR 07-12 FLS/FLST 0403-0048 Smooth, chrome $599.95 0403-0049 Smooth, black 599.95 0403-0050 Deep Cut, chrome 599.

95 0403-0059 Deep Cut, black 599.95 FOR 00-06 FLST 0403-0052 Smooth, chrome 599.95 0403-0053 Smooth, black 599.95 0403-0054 Deep Cut, chrome 599.95 0403-0055 Deep Cut, black 599.

1 SEPTEMBER 2012 ARLEN NESS You will now find three generations of this motorcycle family lending their expertise to parts and accessories that bear one of the most recognizable names in custom Ness. Between rides, promotions and events you will find father Arlen, son Cory and grandson Zach designing, testing and building many of the hottest parts and accessories available today here in their U.S. headquarters. Be sure to have plenty of Ness on hand when your customers come asking for it by name HOT LEGS FORK LEG SETS Tapered billet machined design with hidden axle drastically cleans up front end Offered in Smooth and Deep Cut designs in either chrome or black anodized Accept all internal OEM components Sold in pairs FOR FLS/FLST Smooth, chrome $ Smooth, black Deep Cut, chrome Deep Cut, black FOR FXST Smooth, chrome Smooth, black FOR FXST (CONT) Deep Cut, chrome $ Deep Cut, black FOR FLST Smooth, chrome Smooth, black Deep Cut, chrome Deep Cut, black FOR FXST Smooth, chrome $ Smooth, black Deep Cut, chrome Deep Cut, black REPLACEMENT COMPONENTS Repl. axle for FLST Repl. axle for FLST SADDLEBAG LATCH KIT Direct OEM replacement components Comes with latch assemblies, all necessary hardware hinges and tether straps; face plates and saddlebag locks not included Also works on aftermarket custom saddlebags Saddlebag latch kit $249.95

VANCE & HINES The Terry Vance & Byron Hines legacy began over 30 years ago

Their Made-In-The-USA performance products are bred from their racing

Start-to-finish, their intake, fuel-management and exhaust systems are

Available in brushed stainless steel or black ceramic powder-coated stainless

full merge collector for maximum performance Tuned length megaphone 1800-1501

Racepack EGT fittings in both headpipes Includes O 2 sensor port plugs for

ports for wideband tuning capability Designed and made in the U.S.A.

09 FXSTSSE) $784.95 1800-1502 For 06-12 Dyna Glide models (except FLD) 773.

95 1800-1496 For 09-12 VRSCF V-Rod Muscle 805.

2 VANCE & HINES The Terry Vance & Byron Hines legacy began over 30 years ago with a race-winning formula that continues today. Their Made-In-The-USA performance products are bred from their racing experience and are second-to-none for quality, performance and style. Start-to-finish, their intake, fuel-management and exhaust systems are in-house designed and tested to ensure the final products are all worthy of the Vance & Hines name COMPETITION SERIES 2-INTO-1 EXHAUST Available in brushed stainless steel or black ceramic powder-coated stainless steel to provide significant weight savings over stock Stepped headpipes and full merge collector for maximum performance Tuned length megaphone Slip fit collector joints with two dual swivel end retention springs Racepack EGT fittings in both headpipes Includes O 2 sensor port plugs for non-sensor applications Flat plane 12mm and quick access 18mm oxygen sensor ports for wideband tuning capability Designed and made in the U.S.A. BRUSHED STAINLESS STEEL For FXS/FXST/FLS/FLST models (except 09 FXSTSSE) $ For Dyna Glide models (except FLD) For XL models For VRSCF V-Rod Muscle BLACK CERAMIC POWDER-COAT STAINLESS STEEL For FXS/FXST/FLS/FLST models (except 09 FXSTSSE) $ For Dyna Glide models (except FLD) For XL models For VRSCF V-Rod Muscle

ALL ELECTRIC EASY SHIFT SPEED SHIFTER KITS For speed, comfort and fun Electronically suspends the ignition system, allowing the transmission to smoothly shift up or down with just the push of a

street riding or full-throttle shifting Also a perfect match for male and female riders who own bikes that require a lot of hand strength to pull in the clutch lever OEM shifting ability is retained

module that sends a quick signal from the handlebar control to the shift cylinder Also included is the electronic ignition kill module and step-by-step instructions with photos for easy installation

95 0510-0218 0510-0219 0510-0220 KICKSTANDS Available in a stock replacement style and for lowered suspension Stock replacement model provides a less steep lean angle, which in turn reduces effort

3 ALL ELECTRIC EASY SHIFT SPEED SHIFTER KITS For speed, comfort and fun Electronically suspends the ignition system, allowing the transmission to smoothly shift up or down with just the push of a button Shift up at partial or full throttle and back down at the touch of a button There is no need to use the foot shifter, and the clutch is used only when starting or stopping Works for normal street riding or full-throttle shifting Also a perfect match for male and female riders who own bikes that require a lot of hand strength to pull in the clutch lever OEM shifting ability is retained after installation Includes a dual-button handlebar control, a shift cylinder plated with a lustrous chrome finish, bolt-on shift cylinder support bracket and a state-of-the-art control module that sends a quick signal from the handlebar control to the shift cylinder Also included is the electronic ignition kill module and step-by-step instructions with photos for easy installation For 12 FLD models $ For 12 VRSCDX V-Rod $ KICKSTANDS Available in a stock replacement style and for lowered suspension Stock replacement model provides a less steep lean angle, which in turn reduces effort when lifting the bike off the kickstand Lowered models provide a better lean angle when parked, even when turning the bars to the right TIG-welded steel construction; hand-polished to accept smooth show-quality chrome plating Mount directly on the stock mounting bracket and utilizes the stock return spring Feature a large surface foot pad contact area to support the bike better on the ground; the longer kick tab is also easily accessible for use with stock and oversized primary covers Patents Pending. FOR FLHT, FLHX, FLHR, FLTR MODELS Stock repl. kickstand $ front and 1 rear lowered kickstand front and 1 rear lowered kickstand FRONT AXLE CAPS Brass construction Setscrew for easy installation Sold in pairs FOR FXD, FXDWG, SOFTAILS (EXCEPT FXSTD, SPRINGERS), FLT/FLHT, FXR AND XL MODELS ( 3 /4 AXLE) Elite $ Gothic FOR FLHT/FLHR/FLHX/FLTR AND FXD MODELS (1 AXLE) Elite $ Gothic

2330-0017 MEMPHIS SHADES BATWING FAIRING The clean aerodynamic shape and innovative mounting system easily enhances the

with a class A finish that looks great as is or can easily be painted Memphis Shades exclusive No-Tool Trigger-Lock

kits are available in a combination of CNC-machined aluminum plates, stainless steel bolts and aluminum anchors for a

installation NOTE: Batwing Fairing is not compatible with any other fairing windshields, wind deflectors or accessories.

TRIGGER-LOCK MOUNT KIT SPECIFIC TO BIKE MODEL DESCRIPTION BATWING FAIRING POLISHED TRIGGER-LOCK MOUNT KIT For 12 FLD 1

2320-0113 PART # PART # BATWING FAIRING TRIGGER-LOCK MOUNT KIT 2330-0017 $279.95 2320-0113 $142.

the days of fumbling with tools to remove your windshield The revolutionary No-Tool Trigger-Lock hardware features an

latches lock the windshield down until the spring loaded trigger locks are intentionally disengaged, allowing the rider

combination of CNC-machined aluminum plates, stainless steel bolts and aluminum anchors, or black E-coated plates, bolts

4 MEMPHIS SHADES BATWING FAIRING The clean aerodynamic shape and innovative mounting system easily enhances the style and comfort of your ride Inner fairing structure is black textured ABS Fairing outer shell is opaque black Lucite with a class A finish that looks great as is or can easily be painted Memphis Shades exclusive No-Tool Trigger-Lock mount kits feature a detach system that allows you to quickly and easily remove or install your fairing Trigger-Lock kits are available in a combination of CNC-machined aluminum plates, stainless steel bolts and aluminum anchors for a clean appearance that s built to last Fairing is predrilled and fitted with push-out hole plugs for easy wind deflector installation NOTE: Batwing Fairing is not compatible with any other fairing windshields, wind deflectors or accessories. WHAT TO ORDER 1. BATWING FAIRING 2. TRIGGER-LOCK MOUNT KIT SPECIFIC TO BIKE MODEL DESCRIPTION BATWING FAIRING POLISHED TRIGGER-LOCK MOUNT KIT For 12 FLD Requires relocation of front turn signals; kit included PART # PART # BATWING FAIRING TRIGGER-LOCK MOUNT KIT $ $ NO-TOOL TRIGGER-LOCK MOUNT KITS FOR MEMPHIS SHADES FATS/SLIM AND SPORTSHIELD WINDSHIELDS Gone are the days of fumbling with tools to remove your windshield The revolutionary No-Tool Trigger-Lock hardware features an innovative system that allows you to quickly and easily remove your windshields without the use of any tools A pair of latches lock the windshield down until the spring loaded trigger locks are intentionally disengaged, allowing the rider to remove the windshield Hardware is fully adjustable to achieve just the right windshield angle Kits are available in a combination of CNC-machined aluminum plates, stainless steel bolts and aluminum anchors, or black E-coated plates, bolts and anchors Kits are custom-fit to each style of bike for a truly no-hassle installation DESCRIPTION POLISHED BLACK FOR XL1200X For Fats/Slim $ DESCRIPTION POLISHED BLACK FOR XL1200X (CONT) For Sportshields $

2330-0095 MEMPHIS SHADES GAUNTLET FAIRING Gauntlet Fairing is a unitized quarter fairing with a matte black finish inside Class

really achieve the next level of custom Custom fit, model-specific mounting kits feature Memphis Shades exclusive Trigger-Lock

purchasing a plate-only mount kit 2320-0114 2320-0116 TRIGGER-LOCK MOUNT KITS PLATE-ONLY KI TS DESCRIPTION GAUNTLET FAIRING

FAIRING 2330-0095 $109.95 TRIGGER-LOCK MOUNT KITS 2320-0114 $142.95 2320-0116 142.95 PLATE-ONLY MOUNT KITS 2320-0115 $62.

95 3501-0777 3501-0778 3501-0778 3501-0777 SADDLEBAG MOUNT BRACKETS Made of one-piece steel construction and have Dzus clips for

relocation of rear turn signals for lid clearance may be required on some models Dyna brackets mount easily to the fender rails

mount easily to the fender rails and shock stud; rear turn signals must be relocated High-gloss powder-coat finish Designed for

bracket, axle/nut may contact and damage saddlebags.

5 MEMPHIS SHADES GAUNTLET FAIRING Gauntlet Fairing is a unitized quarter fairing with a matte black finish inside Class A gloss black finish outside Smoked windscreen ABS headlight bezel Factory finish looks great as is or can easily be painted to really achieve the next level of custom Custom fit, model-specific mounting kits feature Memphis Shades exclusive Trigger-Lock mounting system on and off without tools, or swap out with Memphis Fats/Slim windshields, Sportshields or Gauntlet Fairing by purchasing a plate-only mount kit TRIGGER-LOCK MOUNT KITS PLATE-ONLY KI TS DESCRIPTION GAUNTLET FAIRING POLISHED BLACK POLISHED BLACK For XL1200X PART # PART # PART # GAUNTLET FAIRING $ TRIGGER-LOCK MOUNT KITS $ PLATE-ONLY MOUNT KITS $ SADDLEBAG MOUNT BRACKETS Made of one-piece steel construction and have Dzus clips for quick 1 /4 turn bag detachment Softail brackets mount at two locations: on fender rails and behind the rear passenger pegs; relocation of rear turn signals for lid clearance may be required on some models Dyna brackets mount easily to the fender rails and shock stud; models with rear turn signals located on fender rails will require relocation of signals Sportster brackets mount easily to the fender rails and shock stud; rear turn signals must be relocated High-gloss powder-coat finish Designed for use with FLT/FLHT/FLHR style saddlebags NOTE: If bike is lowered to where the rear axle/nut is above the bracket, axle/nut may contact and damage saddlebags For FXST/FLST (except models w/ exhaust that runs above the rear axle or with models with rear highway bars) $ For FXD w/ conventional taillight/license plate mount For FXD For FXD For XL w/ conventional taillight/license plate mount

1401-0355 1401-0354 1401-0356 BAGGER-WERX FRONT FENDERS Made of 14-gauge stamped steel with a

legs mounting hole locations Direct replacement front fender for Street Glide and Road Glide

eliminated FOR 00-12 FLT, FLHT, FLHX, FLHR, FLTR 1401-0355 Smooth for 21 wheels $293.

95 COMPLETE CLUTCH KIT Kit includes chain drive clutch basket, a complete clutch assembly with

to pull, but features increased pack pressure at higher rpm for instantaneous engagement

95 1130-0199 1130-0203 PRO CLUTCH KITS WITH VARIABLE PRESSURE PLATE ASSEMBLY Kits include Pro

surface for getting the horsepower to the rear wheel; includes hub, plates and spring Variable

07-10 Big Twin models w/ primary chain drive and stock-style basket $579.

95 PRO CLUTCH KIT Provide a large increase in clutch plate surface for getting the horsepower to

plates and spring Easy installation; just remove the clutch hub, press in the Pro Clutch hub and

6 BAGGER-WERX FRONT FENDERS Made of 14-gauge stamped steel with a raw finish Available in smooth or with accent ribs on the top and bottom Mounts to stock fork legs mounting hole locations Direct replacement front fender for Street Glide and Road Glide models Fits other Touring/Dresser/Bagger models also when fender lights and/or trim are eliminated FOR FLT, FLHT, FLHX, FLHR, FLTR Smooth for 21 wheels $ Ribbed for 16 to 18 wheels Ribbed for 21 wheels COMPLETE CLUTCH KIT Kit includes chain drive clutch basket, a complete clutch assembly with variable pressure plate assembly and starter ring gear Variable pressure plate assembly is easy to pull, but features increased pack pressure at higher rpm for instantaneous engagement For 06 Dyna, Big Twin (46T front sprocket, 106T ring gear) $1, PRO CLUTCH KITS WITH VARIABLE PRESSURE PLATE ASSEMBLY Kits include Pro Clutch and variable pressure plate assembly Pro Clutch provide a large increase in clutch plate surface for getting the horsepower to the rear wheel; includes hub, plates and spring Variable pressure plate assembly is easy to pull, but features increased pack pressure at higher rpm for instantaneous engagement Fit under all OEM outer primary covers For 06 Dyna, Big Twin models w/ primary chain drive and stock-style basket $ For Big Twin models w/ primary chain drive and stock-style basket PRO CLUTCH KIT Provide a large increase in clutch plate surface for getting the horsepower to the rear wheel Features a diaphragm clutch spring for maximum plate pressure Includes hub, plates and spring Easy installation; just remove the clutch hub, press in the Pro Clutch hub and install the clutch pack Sold each For Big Twin models w/ primary chain drive and stock style basket $

1120-0294 23/4 OPEN BELT DRIVE KITS Feature BDL s ball-bearing lockup clutch with ring gear Kits include motor plate, 52-tooth front pulley,

95 1120-0295 FOR 07-12 FXST/FLST/FXS/FLS (CONT) 1120-0295 Black anodized $1,951.

baseplate provides a unique look Kit includes a Kevlar 142-tooth drive belt, motor plate, starter housing and guard, stand offs, side guard and rear

95 2 BELT DRIVE KIT Includes BDL s ball-bearing lockup clutch with ring gear and a new, full-coverage side guard and top mesh belt guard Kit also

7 /4 OPEN BELT DRIVE KITS Feature BDL s ball-bearing lockup clutch with ring gear Kits include motor plate, 52-tooth front pulley, 142T-belt, starter housing and guard, stand offs, side guard and rear pulley cover with hardware FOR FXST/FLST/FXS/FLS Chrome $2, FOR FXST/FLST/FXS/FLS (CONT) Black anodized $1, OPEN BELT DRIVE KIT BDL s ball-bearing lockup clutch with ring gear provides ease of shifting and positive clutch engagement New streamlined baseplate provides a unique look Kit includes a Kevlar 142-tooth drive belt, motor plate, starter housing and guard, stand offs, side guard and rear pulley cover with hardware FOR FXST/FLST/FXS/FLS Chrome $2, BELT DRIVE KIT Includes BDL s ball-bearing lockup clutch with ring gear and a new, full-coverage side guard and top mesh belt guard Kit also includes motor plate and a 132-tooth belt 2 narrow design allows for the use of stock floorboards FOR FLHT/FLHR/FLTR/FLHX Chrome $2, CLOSED BELT DRIVE KIT One of BDL s original closed primary belt drives Kit includes 52-tooth front pulley, 142T-belt, complete clutch kit with ring gear and ball bearing pressure plate and hardware Clutch features 12 cylindrical replaceable clutch dogs, which allows clutch plates to maintain constant contact Kevlar clutch plates allow maximum performance with improved ball bearing pressure plate For FXST/FLST/FXS/FLS $

DRAG SPECIALTIES From everyday needs to custom dreams, if the Drag Specialties name is on it, you can rest assured your riders will be proud of their purchases and will be coming back for more.

stock length kickstands are for bikes with lowered suspension FOR 07-12 FLHT/FLHR/FLHX/FLTR AND 84-00 FLT/FLHT MODELS 0510-0216 Stock length; repl. OEM #50075-07 (9 1 /2 L) $56.

95 FOR 06-12 FXD/FXDWG MODELS 0510-0210 Stock length; repl. OEM #49704-09F/G (11 L) 49.95 0510-0211 1 under stock length (10 L) 49.95 FOR 91-05 FXD/FXDWG MODELS 0510-0212 Stock length; repl.

95 41/2 HIGH-POWER LED SPOTLIGHT Power savings of up to 85% compared to incandescent and halogen lighting High-class thermal dissipation design has twice the efficiency of other lights, lasts up to

8 DRAG SPECIALTIES From everyday needs to custom dreams, if the Drag Specialties name is on it, you can rest assured your riders will be proud of their purchases and will be coming back for more. Our reputation for quality parts and unrivaled service is always at the forefront, and we want to continue to bring you the very best in parts, accessories and service that you have come to expect from a leader GLOSS BLACK KICKSTANDS High-strength steel construction E-coated primer, then powder-coated gloss black for a long-lasting, durable finish Understock stock length kickstands are for bikes with lowered suspension FOR FLHT/FLHR/FLHX/FLTR AND FLT/FLHT MODELS Stock length; repl. OEM # (9 1 /2 L) $56.95 FOR FXS/FXST/FLST (EXCEPT FLSTN) Stock length; repl. OEM # (8 3 /4 L) under stock length (7 3 /4 L) FOR FXD/FXDWG MODELS Stock length; repl. OEM # F/G (11 L) under stock length (10 L) FOR FXD/FXDWG MODELS Stock length; repl. OEM # B (11 L) $ under stock length (10 L) FOR XL Stock length; repl. OEM # (8 L) under stock length (7 L) /2 HIGH-POWER LED SPOTLIGHT Power savings of up to 85% compared to incandescent and halogen lighting High-class thermal dissipation design has twice the efficiency of other lights, lasts up to 35,000 hours Chrome steel housing with a 3 /8-16 mounting stud SAE approved Sold each /2 LED spotlight $ EXHAUST PORT AND CROSSOVER GASKETS High-quality exhaust gaskets Sold in packs of (EA.) Exhaust port gasket for Big Twin and XL; repl. OEM # $ Crossover gasket for XL, FXR; repl. OEM # Interconnect gasket for FXST/FLST, FXD/L/C/B; repl. OEM # Interconnect gasket for FXST/C, FXSTS/B, FLST/C, XL models; repl. OEM # Interconnect gasket for Dyna Glide; repl. OEM # Muffler junction gasket for FLT; repl. OEM

SADDLEBAG LINERS No need for saddlebag organizers, liners feature three storage compartments on top with zipper closures Constructed of heavyweight polyester fabric with a PVC internal coating Center

the lid will flip up creating an open access for EZ loading and locating items Each liner has two handles that can be joined together with hook-and-loop material for easy carrying Sold in pairs Made

95 SPROCKET COVERS High-quality die-cast aluminum sprocket covers Available in polished or chrome finish Mount with existing hardware 1107-0279 1107-0281 1107-0278 1107-0280 1107-0282 CHROME POLISHED

95 HORN COVERS Steel construction finished in chrome or black powder-coat Approximately 4 5 /8 diameter Contrasting screen detail with slot or five-spoke design Round horn covers replace the stock

95 SADDLEBAG LATCH INSERTS Aluminum die-cast construction with re-machined black finish Comes with a ball-milled design that adds to the custom touch Replaces red reflectors on stock latches Sold in

9 SADDLEBAG LINERS No need for saddlebag organizers, liners feature three storage compartments on top with zipper closures Constructed of heavyweight polyester fabric with a PVC internal coating Center compartment is made of a see-through mesh for locating items quickly Zippers on the outer compartments wrap around two sides for easy access The zipper on the main liners wraps around three sides, the lid will flip up creating an open access for EZ loading and locating items Each liner has two handles that can be joined together with hook-and-loop material for easy carrying Sold in pairs Made in the USA For all HD hard saddlebags (except FLD) $79.95 SPROCKET COVERS High-quality die-cast aluminum sprocket covers Available in polished or chrome finish Mount with existing hardware CHROME POLISHED POLISHED (CONT) For XL $ For XL $ For XL $ For XL For XL HORN COVERS Steel construction finished in chrome or black powder-coat Approximately 4 5 /8 diameter Contrasting screen detail with slot or five-spoke design Round horn covers replace the stock cowbell cover found on most Big Twin and XL models (uses stock horn) CHROME spoke $ Slot BLACK POWDER-COAT spoke Slot SADDLEBAG LATCH INSERTS Aluminum die-cast construction with re-machined black finish Comes with a ball-milled design that adds to the custom touch Replaces red reflectors on stock latches Sold in pairs SKULL POINTS COVER Available in chrome or wrinkle black finish with a contrasting screen insert Styles match accessory Drag Specialties horn, derby and dipstick covers Replaces the stock cover; includes mounting hardware FOR EVOLUTION BIG TWIN/70-84 BIG TWIN Chrome $ Black wrinkle FOR FLT/FLHT/FLHR Ball-milled, black powder-coat $25.95 BATTERY LIFT TOOL Allows ease of battery removal and installation in Touring models and other bikes where the battery is removed vertically Grips the battery in the case seam on each end; works on most sealed battery brands Not recommended for use as a battery carrier; always support the battery weight under the battery once it is accessible All-metal construction with a durable powdercoat finish that resists battery acid damage For use on YIX30L and other similar size batteries with approximately 6 9 /16 overall length Battery lift tool $

WILD BOAR SHIFT LINKAGE Chrome steel linkage with chrome-plated ABS wild boar Measures approximately 12 1 /8 long Sold each FOR

95 SIDE-MOUNT LICENSE PLATE HOLDER Holder features a horizontal, curved backing plate with a chrome finish License plate frame

mounts for side-mount license plate assembly for installation (sold separately, see page 1250 of the 2012 FatBook) Accepts most

95 UNIVERSAL HELMET LOCK Mounts to any 1 1 /4 to 1 1 /2 frame tube, engine guard or other tube bar Chrome finish Installs with

95 USB POWERPORT ADAPTER Converts any standard 12 volt powerport to a USB powerport (1 amp maximum) Will charge most smart

10 WILD BOAR SHIFT LINKAGE Chrome steel linkage with chrome-plated ABS wild boar Measures approximately 12 1 /8 long Sold each FOR FXST/FLST/FXS/FLS (EXCEPT FLSTS), TOURING MODELS Wild boar shift linkage $ SIDE-MOUNT LICENSE PLATE HOLDER Holder features a horizontal, curved backing plate with a chrome finish License plate frame is grooved with a chrome finish Features flush-mount flat-head screws and built-in LED license plate light Requires Küryakyn mounts for side-mount license plate assembly for installation (sold separately, see page 1250 of the 2012 FatBook) Accepts most 4 x 7 license plates Horizontal curved side-mount license plate holder $ UNIVERSAL HELMET LOCK Mounts to any 1 1 /4 to 1 1 /2 frame tube, engine guard or other tube bar Chrome finish Installs with hand tools Sold each NOTE: Works best if installed on a 2 1 /4 long section of straight tube Chrome helmet lock $26.95 USB POWERPORT ADAPTER Converts any standard 12 volt powerport to a USB powerport (1 amp maximum) Will charge most smart phones and music devices but not all tablet type devices Micro-processor controlled to provide stable and reliable power in a wide variety of charging conditions USB powerport adapter $

2112-0852 2112-0853 2112-0854 CYCLE ELECTRIC ALTERNATOR KITS Kits include stator, rotor, black rectifying voltage regulator and mounting hardware NOTE: Adding electrical accessories increases

Fuses and breakers are sized to protect wiring and switches. DO NOT CHANGE 30A MAIN BREAKER TO A 50A BREAKER. THE SWITCHES AND WIRING WILL NOT BE PROTECTED.

Mount using 3M double-sided tape that is pre-installed on each Magic Flex Wheel Light Measure 2.9 x 2.3 x.

95 2040-1115 Orange LED 24.95 2040-1116 Pink LED 24.95 CHROME CASE (CONT) 2040-1117 Red LED $24.95 2040-1118 Purple LED 24.95 2040-1119 White LED 24.

bright red LEDs on the outer rim of the mirrored side function as turn indicators Notifies when signal is left on (for bikes without self-canceling turn signals) Also feature crystal clear lenses and

5 Sold in pairs NOTE: These LED Accent Mirrors are designed to piggy-back with stock turn signals.

tongue and ball; install in seconds without tools Simple bolt-on installation mounts to bike at five points for superior rigidity Plug-in wire harness no cutting, drilling or wire splicing required

11 CYCLE ELECTRIC ALTERNATOR KITS Kits include stator, rotor, black rectifying voltage regulator and mounting hardware NOTE: Adding electrical accessories increases amperage usage. When doing so it is important to consider amperage ratings of switches and wires. If you draw too many amps through a switch or wire, it will heat up and may burn. Fuses and breakers are sized to protect wiring and switches. DO NOT CHANGE 30A MAIN BREAKER TO A 50A BREAKER. THE SWITCHES AND WIRING WILL NOT BE PROTECTED. MAGIC FLEX WHEEL LIGHTS Contain 15 high-power LEDs that are pre-wired with 84 black sheath wire leads that make it easy to install in almost any application Available in both chrome and black cases Mount using 3M double-sided tape that is pre-installed on each Magic Flex Wheel Light Measure 2.9 x 2.3 x.4 Mount to most H-D brake calipers (except narrow glide front ends, XL, FXR, some Dynas and V-Rod) Sold each CHROME CASE Blue LED $ Green LED Orange LED Pink LED CHROME CASE (CONT) Red LED $ Purple LED White LED CUSTOM LED ACCENT MIRRORS Anti-vibration design for clearer vision Feature super-bright LEDs that are easy to see in the brightest sun Front amber LEDs accent both turn signals and running lights; bright red LEDs on the outer rim of the mirrored side function as turn indicators Notifies when signal is left on (for bikes without self-canceling turn signals) Also feature crystal clear lenses and RIVCO s black satin finished, PitchBlack frames Simple bolt-on, plug-in installation Convex mirrored glass measures 3 x 5.5 Sold in pairs NOTE: These LED Accent Mirrors are designed to piggy-back with stock turn signals. VERTICAL RECEIVER-STYLE TRAILER HITCH Laser-cut from high tensile strength steel, then formed and TIG welded by hand for superior fit, strength and reliability Vertical receiver hitch features chrome tongue and ball; install in seconds without tools Simple bolt-on installation mounts to bike at five points for superior rigidity Plug-in wire harness no cutting, drilling or wire splicing required Once installed, the black powder-coated main hitch frame is virtually unseen; only removable chrome vertical receiver remains visible Includes hitch, tongue, plug-n-play wire harness and ball ALTERNATOR KITS For XL; 20A at 1400 rpm $ For XL; 20A at 1400 rpm For XL; 20A at 1400 rpm BLACK CASE Blue LED $ Green LED Orange LED Pink LED BLACK CASE (CONT) Red LED $ Purple LED White LED Black $ NOTE: Will not fit/work on the CVO Ultra Classic Electra Glide or any model listed with filler panels. SAFETY WARNINGS: For information on the care, safety, maintenance, mounting, manufacturer s warranty and other information, consult the motorcycle manufacturer s and the trailer hitch manufacturer s publication(s) and/or website(s) for complete information. Towing can negatively affect handling, cornering, stopping and stability and may void your warranty. Towing increases the likelihood of serious injury or death. If you tow a trailer, never exceed the motorcycle manufacturer s Gross Vehicle Weight For FLHT/FLHR (except FLHRC/FLHTCU SE) $

SENA These days everybody wants to stay in touch.

The folks at Sena Technologies are making it just as easy to stay in touch with passengers or fellow riders out on the road.

enthusiast. Put your customers in touch today with Sena Technologies.

0 Bluetooth Intercom up to 400 meters (430 yards) in open terrain Multi-pair Bluetooth intercom Voice Prompts Bluetooth stereo

Jog Dial Sufficient sound level with integrated audio booster Bluetooth handsfree for Bluetooth mobile phones Bluetooth headset

quality Up to eight hours talk time, seven days stand-by time Can be used while charging on road trips Individual volume control

microphone or wired microphone 1- USB power and data cable 1- Hook-and-loop surface mounting plate 1- Hook-and-loop pad for Boom

speakers 2- Speaker pads 2- Helmet speakers BLUETOOTH HEADSET/INTERCOMS W/ BOOM MICROPHONES 4402-0233 Single unit $128.

95 SMH-5 DUAL-PACK KIT INCLUDES: 1- Owner s manual 2- Headset main units 2- Clamp units 2- Attachable Boom microphones or wired

Attachable Boom microphone holders 2- Allen wrenches 4- Microphone sponges 4- Hook-and-loop pads for speakers 4- Speaker pads 4-

12 SENA These days everybody wants to stay in touch. Whether it is Facebook, Twitter or other social media, people are more connected than ever before. The folks at Sena Technologies are making it just as easy to stay in touch with passengers or fellow riders out on the road. Their full range of Bluetooth communication products are state-ofthe-art and specifically designed for the motorsports enthusiast. Put your customers in touch today with Sena Technologies SENA SMH-5 BLUETOOTH STEREO HEADSET/COMMUNICATOR/INTERCOM Bluetooth specification v3.0 Bluetooth Intercom up to 400 meters (430 yards) in open terrain Multi-pair Bluetooth intercom Voice Prompts Bluetooth stereo headset by A2DP Bluetooth music playback control by AVRCP: play, pause, track forward and track back Easy operation by versatile Jog Dial Sufficient sound level with integrated audio booster Bluetooth handsfree for Bluetooth mobile phones Bluetooth headset or stereo headset for Bluetooth GPS navigations Water resistant for use in inclement weather Crystal clear and natural sound quality Up to eight hours talk time, seven days stand-by time Can be used while charging on road trips Individual volume control for each audio source Firmware upgradeable SMH-5 SINGLE UNIT KIT INCLUDES: 1- Headset main unit 1- Clamp unit 1- Attachable Boom microphone or wired microphone 1- USB power and data cable 1- Hook-and-loop surface mounting plate 1- Hook-and-loop pad for Boom microphone 1- Attachable Boom microphone holder 1- Allen wrench 1- Owner s manual 2- Microphone sponges 2- Velcro pads for speakers 2- Speaker pads 2- Helmet speakers BLUETOOTH HEADSET/INTERCOMS W/ BOOM MICROPHONES Single unit $ Dual pack Half helmet SMH-5 DUAL-PACK KIT INCLUDES: 1- Owner s manual 2- Headset main units 2- Clamp units 2- Attachable Boom microphones or wired microphones 2- USB power and data cables 2- Glued surface mounting plates 2- Hook-and-loop pads for Boom microphones 2- Attachable Boom microphone holders 2- Allen wrenches 4- Microphone sponges 4- Hook-and-loop pads for speakers 4- Speaker pads 4- Helmet speakers ACCESSORIES AND REPLACEMENT PARTS Mounting kit $ Supplies kit Boom mic helmet clamp kit Wired mic helmet clamp kit ACCESSORIES AND REPLACEMENT PARTS (CONT) Repl. Boom mic $ Repl. wired mic Large speaker upgrade SEPTEMBER

JBrake.com Made in the U.S.A. Forums.SuperTrapp.com P:

JBrake.com Made in the U.S.A. Forums.SuperTrapp.com P: Master Index 3 FORWARD CONTROLS & PEGS: J-FL Forward Controls 131 Classic Solid Forward Controls 132-133 Radial Slotted Forward Controls 134-135 J-FX Forward Controls 136-137 Pegs 138-139 HAND CONTROLS