TRUE DUALS WITH FISHTAIL MUFFLERS 4" SLIP-ON MUFFLERS REPLACEMENT BILLET END CAPS HIGH PERFORMANCE 4" STRAIGHT TUBE SLIP-ON MUFFLERS APRIL 2015

Transcription

1 TRUE DUALS WITH FISHTAIL MUFFLERS Feature 13/4" head pipes that step into 21/4" fishtail mufflers Chrome heat shields cover headers Available with or without baffles systems accept 12mm and 18mm O 2 sensors 21/4" MUFFLERS FOR SOFTAIL MODELS True Duals w/ 30" fishtail mufflers (no baffles) $ True Duals w/ 33" fishtail mufflers (no baffles) True Duals w/ 36" fishtail mufflers (no baffles) True Duals w/ 30" fishtail mufflers True Duals w/ 33" fishtail mufflers True Duals w/ 36" fishtail mufflers FOR SOFTAIL MODELS True Duals w/ 30" fishtail mufflers (no baffles) True Duals w/ 33" fishtail mufflers (no baffles) True Duals w/ 36" fishtail mufflers (no baffles) True Duals w/ 30" fishtail mufflers True Duals w/ 33" fishtail mufflers True Duals w/ 36" fishtail mufflers " SLIP-ON MUFFLERS " diameter slip-on mufflers feature 16-gauge steel construction, removable flow-through baffles and show-chrome or black finish Bolt to stock locations with supplied hardware Sold in pairs FOR XG 500/ Megaphone, black w/ black billet end caps and contrasting flutes $ Straight cut, black w/ black billet end caps and contrasting flutes Straight cut (long), black w/ black billet end caps and contrasting flutes HIGH PERFORMANCE 4" STRAIGHT TUBE SLIP-ON MUFFLERS Utlilize an advanced inner collector that will enhance power and torque Slip on to your stock head pipes for easy installation Chrome bodies with black end caps and contrasting flutes Sold in pairs For VRSCF $ REPLACEMENT BILLET END CAPS Designed for use with Bassani 4" slip-on quick-change mufflers Available in extended versions to fit with stretched saddlebags Slash-cut end caps can be rotated for different looks Sold each Black w/ flutes 1" extended $ Black w/ flutes 2" extended Black slash cut 1" extended Black slash cut 2" extended DISCLAIMER: THE CALIFORNIA AIR RESOURCES BOARD ( CARB ) DOES NOT PERMIT THE USE OF AFTERMARKET EMISSION-RELATED PART(S) THAT ALTER THE PERFORMANCE OF OEM EMISSION- RELATED DEVICES UNLESS CARB HAS ISSUED AN EXECUTIVE ORDER, OTHER THAN ON RACING VEHICLES ON CLOSED COURSES. CHECK YOUR LOCAL LAWS AND MANUFACTURER S INFORMATION. dragspecialties.com

2 TECHNORESEARCH We at Drag Specialties are always happy to welcome new vendors and manufacturers to our family. This month we welcome the folks at Technoresearch to the team. Here you will find advanced, easy to use tuning and professional diagnostic products. You can save time and make more money when you choose Technoresearch. Watch here and in upcoming catalogs for even more. MAXIMUS TUNER Most advanced, easy-to-operate single-user flash tuning tool for ALL fuel-injected Harley-Davidsons Utilizes advanced hardware and software specifications to combine the most commonly used features from the Centurion Pro professional diagnostics tool as well as the Direct Link professional flash tuning tool Easy hookup with included cables Once tuning is complete, the kit is simply unplugged until the next tune Maximus allows backing up and restoring original maps, as well as re-flashing stock ECUs and performing routine diagnostics Fast data acquisition and many hours of data storage provides accuracy and saves time Provides power from the motorcycle for wideband O 2 sensors and will record/ monitor wideband O 2 sensors Tuning features include the ability to modify front and rear cylinder fuel/ spark tables separately, air/ fuel ratio, warm-up fuel, cranking fuel, closed loop, acceleration/ deceleration, rev limiter and the ability to restore original map Easy-to-use auto mapping feature Diagnostic features include key fob coding, speedometer calibration, read and clear diagnostic trouble codes (DTC), and system relay testing Requires the use of Windowsbased PC, laptop or tablet NOTE: Can be used on one motorcycle an unlimited amount of times, but not multiple bikes For Softail, Dyna and all models w/ CAN data bus (except V-rod) (6-pin connector) $ For models w/ Delphi EFI (J1850), V-Rod and models w/ Marelli EFI (4-pin connector) CENTURION SUPER PRO AND SUPER PRO PLUS PROFESSIONAL DIAGNOSTIC TOOLS The industry s only complete professional diagnostic tool system designed for independent professional repair facilities Communicates with all Harley- Davidson and Buell models using the proprietary VCM-TR3 Communication Module with included cables Re-flash blank ECU, program VIN and Key Fobs Perform radio and speaker calibration on all models up to 2014 Easily perform speedometer calibration on all models through 2015 ABS bleeding and solenoid testing Read and clear Diagnostic Trouble Codes (DTC) Reset air/ fuel values and adjust idle rpm Perform active tests on tachometer, speedometer, fuel pump, idle rpm, system relays, cooling fans, alarm, IAC, ACR compression, injector coils, coolant pump, left or right turn signals and other systems LED indicator tests for 6th gear, ABS service, battery, check engine, cruise control, high and low beam, neutral, oil, security and coolant temp View real-time data in strip chart or digital dashboard formats Requires use of a Windows or Android-based PC, laptop or tablet; connect using either included cable or Bluetooth wireless connection Fast data acquisition and many hours of data storage provides accuracy and saves time Can easily update software online through Technoresearch to stay current on all features, years and model types Included VCM-TR3 Communication Module is fully compatible with Direct Link & Tune Builder keys (sold separately) Includes Mobile Dyno with Android app that provides more than 20 hours of data logging Durable metal housing and easy adapter system allowing for fast switches between motorcycles Made in the U.S.A For H-D and Buell models $ 1, For H-D and Buell models, Victory and Indian models (all) 2, DISCLAIMER: THE CALIFORNIA AIR RESOURCES BOARD ( CARB ) DOES NOT PERMIT THE USE OF AFTERMARKET EMISSION-RELATED PART(S) THAT ALTER THE PERFORMANCE OF OEM EMISSION-RELATED DEVICES UNLESS CARB HAS ISSUED AN EXECUTIVE ORDER, OTHER THAN ON RACING VEHICLES ON CLOSED COURSES. CHECK YOUR LOCAL LAWS AND MANUFACTURER S INFORMATION. 2

3 DIRECT LINK TUNING KEY Provides the most extensive, professional, easy-to-use flash tuning capabilities available For use with any Technoresearch VCM-TR3 (Centurion Pro, Pro Plus or Tune Builder) Direct Link s included Auto Mapping feature greatly reduces the users need to do cell-by-cell tuning calculations Allows tuners to modify fuel and spark tables (front and rear cylinders), air fuel ratio, warm-up fuel, cranking fuel, closed loop, acceleration and deceleration, rev limiter and knock control Fuel, spark and AFR real-time cell tracing Simultaneous modification of both front and rear cylinder fuel and spark tables TUNE BUILDER Tune Builder is an easy-to-use, professional tuning aid that saves up to 50% of the time needed to create mapping Quickly combines current map information with using its powerful data collection and sophisticated algorithms to automatically create tables that allows users to copy/ paste completed maps into flash tuning software After data is collected from a motorcycle ECU, Tune Builder s Auto Mapping feature automatically generates fuel tables to create the most efficient map possible Can be used with all flash tuning software regardless of brand, including OE and aftermarket products Effortlessly tune Volumetric Efficiency (VE) tables, detect and remove spark knock and evaluate engine usage areas Log up to 16 channels simultaneously and at high frequency Record and seamlessly integrate any O 2 sensor device into data collection Can utilize the motorcycle s stock narrow band O 2 sensors (if equipped) View 3D plots in a grid or in color and view statistics on collected data View and adjust tables simply View data using Strip Chart or Digital Dashboard Data logging and data analysis features Save back-up with calibrations and restore the original map Wideband O 2 sensor controller interfacing Motorcycle s VIN is assigned to one key and can be used for multiple tunes For all Harley-Davidson models w/ Delphi EFI $ For all Harley-Davidson models w/ Marelli EFI Easy to apply manual corrections of VE and spark tables Can apply changes to front and rear tables simultaneously Keys are available with either five or 10 licenses; one license used per motorcycle NOTE: PART # includes VCM-TR3 communication hardware and cables. License keys need to be purchased separately. NOTE: If you have a Centurion Super Pro or Centurion Super Pro Plus, PART # is NOT needed Tune Builder VCM (does not include keys) $ Tune Builder License Key w/ five licenses (ea.) Tune Builder License key w/ ten licenses (ea.) COMPLETE BIKE HARNESS The perfect start for any project bike or OEM model re-wire Complete bike harness w/ starter relay, 3-circuits, self-canceling and run, brake and turn signal module Works with any stand alone, Evo or Twin Cam ignition system Designed to operate with a two-position key switch Key start switches can be used with a simple wiring modification (ignition system and key switch are not included with this harness) OEM color-matching harness with 11-second self-canceling turn signal module Fuse block holds a full size, commonly available and replaceable starter relay and three (3) ATO fuses A 30-Amp circuit breaker is installed and is ready for any regulator/charging system Harness provides running light and turn signal functions to the front turn signals, run, brake and turn signal functions for the rear turn signals Oil, neutral, high beam and turn signal indicator wiring Color-matching handlebar switch wiring, as found on most models (except Dresser models) Headlight wiring with headlight socket and terminals Front turn signal connectors and terminals Rear fender harness with connectors and terminals Key switch wiring with ring terminals Coil wire with ring terminals, tachometer, horn, oil sending unit, brake switch and neutral switch wiring with terminals Sections of 3 16", 1/4", 3 8" and 1/2" i.d. heat shrink included Heavy-gauge, 12 (+) power and (-) ground wires with terminals for battery connection Wiring harness $ TOUR PAK PLUG-N-PLAY REAR SPEAKER HARNESS Fits all models with a Harmon Kardon radio and using a factory speakerequipped Tour-Pak ; allows the use of Tour-Pak audio controls NOTE: Customer will need to have the radio flashed by a dealer to activate rear channels in order for these harnesses to work For models w/ Harmon Kardon radio and using a factory speaker-equipped Tour Pak $ DISCLAIMER: THE CALIFORNIA AIR RESOURCES BOARD ( CARB ) DOES NOT PERMIT THE USE OF AFTERMARKET EMISSION-RELATED PART(S) THAT ALTER THE PERFORMANCE OF OEM EMISSION-RELATED DEVICES UNLESS CARB HAS ISSUED AN EXECUTIVE ORDER, OTHER THAN ON RACING VEHICLES ON CLOSED COURSES. CHECK YOUR LOCAL LAWS AND MANUFACTURER S INFORMATION. 3

4 TCFI GEN 7 FUEL INJECTION CONTROLLER Fully programmable plug-in replacement for 54-pin Delphi controller with CAN data bus used on 14 Touring models Quickly auto-tune fuel curves for front and rear cylinders on a dyno or on-road with new WEGO IIID dual channel, wide-band, oxygen sensor interface Real-time and continuous auto-tuning with monitoring, control and override capability Robust alpha-n (throttle position and rpm-based) fuel control eliminates problems with long duration/high overlap camshafts Powerful Windows software for custom programming and data analysis Extended data logging and diagnostics; DataFLASH memory stores full 60 minutes of operating data at 10 samples/second Powerful Windows software for custom programming and data analysis Programmable user input for functions such as two-stage rpm limiter, nitrous retard, and shift kill and output Programmable user output for functions such as shift light, nitrous activation and electric shifter Billet aluminum housing with black anodized finish Easy plug-in installation NOTE: Not legal for sale or use on pollution controlled vehicles. Not for sale in California. NOTE: Requires the use of an exhaust system with 18mm sensor bungs, or headpipes must be modified to accept 18mm sensors For 14 FLHT, FLHR, FLHX, FLTRX models $ TCFI GEN 6 FUEL INJECTION CONTROLLER Fully programmable plug-in replacement for 73-pin Delphi controller with J1850 data bus used on Touring models Quickly auto-tune fuel curves for front and rear cylinders on a dyno or on-road with new WEGO IIID dual channel, wide-band, oxygen sensor interface Real-time and continuous auto-tuning with monitoring, control and override capability Robust alpha-n (throttle position and rpm-based) fuel control eliminates problems with long duration/high overlap camshafts Support for gear indication on accessory speedometers Powerful Windows software for custom programming and data analysis Extended data logging and diagnostics; DataFLASH memory stores full 60 minutes of operating data at 10 samples/second Programmable user input for functions such as two-stage rpm limiter, nitrous retard, and shift kill input and output Programmable user output for functions such as shift light, nitrous activation and electric shifter User-friendly PC Link software with 3-D graphics and easy spreadsheet editing capabilities Billet aluminum housing with black anodized finish Easy plug-in installation NOTE: Not legal for sale or use on pollution controlled vehicles. Not for sale in California. NOTE: Requires the use of an exhaust system with 18mm sensor bungs, or headpipes must be modified to accept 18mm sensors For FLHT, FLHR, FLHX, FLTR models $ FUEL INJECTOR CLEANER KITS Easily clean most fuel injectors Will flush and back flush injectors for best possible cleaning process No compressed air required Require aerosol can of fuel injection cleaner (not included) Push button switch to turn fuel injector on with LED indicator light Durable anodized billet aluminum construction Built tough for everyday shop use Kits include fuel injector cleaner tool and pigtail Patent pending FOR EFI BIG TWIN Fuel injector cleaner kit $ Repl. fuel injector pigtail FOR EFI BIG TWIN Fuel injector cleaner kit Repl. fuel injector pigtail DISCLAIMER: THE CALIFORNIA AIR RESOURCES BOARD ( CARB ) DOES NOT PERMIT THE USE OF AFTERMARKET EMISSION-RELATED PART(S) THAT ALTER THE PERFORMANCE OF OEM EMISSION-RELATED DEVICES UNLESS CARB HAS ISSUED AN EXECUTIVE ORDER, OTHER THAN ON RACING VEHICLES ON CLOSED COURSES. CHECK YOUR LOCAL LAWS AND MANUFACTURER S INFORMATION. 4

5 REV2 THROTTLE KIT The most advanced variable rate throttle in the world Innovative reel changing system lets you tailor the throttle rate to riding conditions and rider preference Ultra-compact housing with snap-together elbows make it easy to install and change reels New sleek design requires less handlebar space for lever clearance and throttle position Use smaller reels for slower throttle rate and larger reels for faster throttle rate Included cam reel provides progressive throttle response preferred by some riders Unique reel design allows fast reel changes Cable boot keeps dirt and dust out for reliable and smooth operation Billet aluminum inline cable adjusters for easy installation and adjustment Lower section of cables use 5mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight Upper section of cables use 6mm housing to provide solid support of adjusters Simple to install and maintain Kit includes Rev2 throttle assembly with throttle tube, Motion Pro Revolver black vinyl cables, Motion Pro RoadControl grips and Rev2 Street cam reel Standard interchangeable reels 35mm, 40 mm, 45 mm, 50 mm are also included Designed by Motion Pro Patent pending For XR1200/X $ FINNED TRANSMISSION SIDE COVERS Covers are CNC-machined from billet aluminum Allow the use of the stock clutch cable Bolt-on installation FOR FLHT, FLHR, SOFTAIL AND DYNA Black $ Chrome HYDRAULIC CLUTCH MASTER CYLINDER COVERS CNC-machined from billet aluminum Include new mounting hardware FOR FLHT, FLHX, FLTRX AND SCREAMIN EAGLE MODELS Dimpled, black $ Dimpled, chrome TRANSMISSION TOP COVERS CNC machined from billet aluminum Direct bolt-on replacement for the stock cover FOR FLHT/FLHR/FLHX/FLTR, SOFTAIL, DYNA Finned, black $ Dimpled, black $ Finned, chrome Dimpled, chrome

6 SISSY BARS AND SIDE PLATES All sissy bars are constructed from 9 16" solid steel Side plates are a bolt-on design no drilling required Bars and side plates sold separately Available in chrome or with a gloss black finish Bars are measured from the first bend to the top of the bar SQUARE SISSY BARS MODEL & YEAR SIDE PLATES TALL SISSY BAR SHORT SISSY BAR BAR WIDTH CHROME For FLHT/FLHR/FLTR/FLHX (w/o Tour-Pak ) (14.75") (10.14") 8.75" For FL/FLH (w/o Tour-Pak ) (14.75") (10.14") 8.75" For FXST/S/B, FLSTF, FLSTN (14.75") (10.14") 8.75" For FLSTC, FLSTC/S, FLSTN (14.75") (10.14") 8.75" For FLSTC/N 86-99, FLSTF (14.75") (10.14") 8.75" For FXWG, FXST (14.75") (10.14") 8.75" For FXD (except FXDX) (12.8") (10") 6.99" For FXR (12.8") (10") 6.69" For XL (15.14") (10") 8.25" For XL (15.14") (10") 8.25" GLOSS BLACK For FXST/S/B, FLSTF, FLSTN (14.75") (10") 8.75" ROUND SISSY BARS MODEL & YEAR SIDE PLATES TAPERED SISSY BAR BAR WIDTH CHROME For FLHT/FLHR/FLTR/FLHX (w/o Tour-Pak ) (10.1") 8.75" For FL/FLH (w/o Tour-Pak ) (10.1") 8.75" For FXST/S/B, FLSTF, FLSTN (10.1") 8.75" For FLSTC, FLSTC/S, FLSTN (10.1") 8.75" For FLSTC/N 86-99, FLSTF (10.1") 8.75" For FXWG, FXST (10.1") 8.75" For XL (11.5") 8.25" For XL (11.5") 8.25" GLOSS BLACK For FXST/S/B, FLSTF, FLSTN (10.1") 8.75" PRICE LIST PART # SUG. RETAIL PART # SUG. RETAIL PART # SUG. RETAIL PART # SUG. RETAIL PART # SUG. RETAIL $ $ $ $ $

7 CLUTCH LEVER BRACKETS Made of die-cast aluminum Available in black or chrome Sold each FOR 15 SOFTAIL, FLHT/FLHR/FLHX/FLTR AND H-D FL TRIKE W/ MECHANICAL CLUTCH Chrome $ Black; repl. OEM # A BRAKE/CLUTCH CONTROL KITS AND SWITCH HOUSINGS Feature chrome brake and clutch controls Die-cast aluminum switch housings have radiused edges, OEM-style clamps, smooth tops and a chrome finish for a clean look Accept OEM style switches and wiring Master cylinders accept OEM-style rebuild kits and have clearance for all 11/4" handlebars NOTE: Models with dealer-installed cruise control may require different or additional lower switch housings. Upper and lower switch housings are not compatible with OEM housings. BRAKE/HYDRAULIC CLUTCH CONTROL KIT For FLHT/FLHX (w/ OEM hydraulic clutch) $ SWITCH HOUSING KIT For models FLHT/FLHX (w/ OEM hydraulic clutch) CLUTCH AND BRAKE CONTROLS CLAMP HALVES Faithful reproduction of the original clamp halves that secure the handlebar master cylinder or clutch control Die-cast aluminum construction Available in chrome or black Sold each FOR FLHT/FLTR/FLHR MODELS (EXCEPT FLTRX) Black; repl. OEM # A $ Chrome FOR 15 FXSB/FLS/FLST MODELS Black; repl. OEM # A (clutch only) Chrome (clutch only) OPTIONAL QUIET BAFFLE FOR RAYZER SLIP-ON MUFFLERS Sold each For Python Rayzer Touring Slip-ons, PART #s / $ DISCLAIMER: THE CALIFORNIA AIR RESOURCES BOARD ( CARB ) DOES NOT PERMIT THE USE OF AFTERMARKET EMISSION-RELATED PART(S) THAT ALTER THE PERFORMANCE OF OEM EMISSION-RELATED DEVICES UNLESS CARB HAS ISSUED AN EXECUTIVE ORDER, OTHER THAN ON RACING VEHICLES ON CLOSED COURSES. CHECK YOUR LOCAL LAWS AND MANUFACTURER S INFORMATION. 7

8 DOG DISH AIR CLEANER ASSEMBLIES Feature a hand-spun 5 3 8" polished aluminum cover with a high-quality element for high flow as well as superior protection from dust and dirt Include a black powder-coated backing plate and all necessary mounting hardware NOTE: Will require the separate purchase of a crankcase breather/carb support bracket kit CV CARB SUPPORT BRACKET Provides additional support for the carb and air cleaner Black powder-coated steel NOTE: Breather kits/bolts sold separately For Evolution Big Twin model w/ CV carb $ For CV carb $ For S&S Super E carb TOP MOTOR MOUNTS Heavy-duty steel with a black powder-coated finish Ideal for choppers and custom builds Available in heavy-duty OE-replacement design or with coil mount or ignition switch mount PRIMARY MOUNT LICENSE PLATE BRACKET Mounts off the primary using the stock hardware Just install the steel backing plate (applying thread locker to the bolts when re-installing) then attach the aluminum license plate backing plate, either vertically or horizontally, with the supplied hardware Super clean and tucked in Plate area is 7.25" 4.25" NOTE: Be sure to check your local laws regarding license plate orientation and location For XL models $ FOR BIG TWIN Heavy-duty stock style top motor mount $ Top motor mount w/ coil mount Top motor mount with ignition switch mount STEERING STEM BEARING KIT Restore the original smooth steering response; no more notchy feeling Exact OEM replacement kit; highest quality materials used in seals, bearings and races For FLT, FLHT, FLHX, FLHR, FLTR models, FXST, FLST, FXCW models, FXD, FLD models, FXR, XL models and VRSC models; repl. OEM #s , $ AXLE MOUNT LICENSE PLATE BRACKET Fits any 3/4" axle; just install the steel plate off your axle, then attach the aluminum license plate backing plate, either vertically or horizontally, with the supplied hardware Plate area is 7.25" 4.25" NOTE: Be sure to check your local laws regarding license plate orientation and location Axle mount license plate bracket $

9 BRAT SOLO AND TWO-UP SEATS Narrow, compact style Thick, fiberglass pan Available with a hand sewn, ribbed or diamond pattern black vinyl cover and a high-density foam base FOR 04-06, XL Solo, ribbed pattern $ Solo, diamond pattern Two-up, ribbed pattern Two-up, diamond pattern FOR XL Solo, ribbed pattern Solo, diamond pattern Two-up, ribbed pattern Two-up, diamond pattern OIL FILLER CAPS Machined from 6061 T-6 US-grade material using latest 5-axis technology for a beautiful detailed finish Hand-detailed polished with bright dipped chrome plating or gloss black finish Lightweight and high strength A simple snap in place; just remove old cover and clip on Retains stock dipstick FOR FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKE Chrome $ Black SIRIUSXM VEHICLE TUNER Designed to easily connect to SiriusXM-ready Jensen audio systems Features 20+ channels of additional music, sports, entertainment and SiriusXM Latino, a collection of 12 Spanish language channels Connect, control and enjoy through compatible audio systems Compact size hides discreetly behind the dash for a fully integrated look Single interface cable connection to SiriusXM-Ready stereos simplifies installation Includes vehicle tuner, magnetic mount antenna and installation guide NOTE: Requires a SiriusXM subscription to function SiriusXM Vehicle Tuner $ Straight, bolt-on installation in solo or two-up versions BLACK VINYL CABLE/LINE KITS Complete installation kit for 12", 14" and 16" Burly Ape hangers Kits include extended, single-disc, black braided steel brake line, extended clutch cable, extended throttle cables and all necessary wiring NOTE: Kits are based on using 2" risers with Ape hanger-style handlebars. FOR XL " Ape hanger bar $ " Ape hanger bar " Ape hanger bar DECELERATION LIGHTING CONTROL MODULE Detects and indicates all methods of deceleration, whether engine braking, downshifting or using brake levers Encourages increased following distances, and reduces the risk of rear end collisions Two different flash patterns alert drivers to normal deceleration and emergency braking Under-seat or other black box mounting Uses stock brake or signal lights; no additional lighting included Optional brake lever-actuated flashing at stoplights for increased visibility Maintains original aesthetics of your motorcycle 12VDC, and two options for installation Independent of license plate size Hook-and-loop and easy Posi-Tap, Posi-Lock connectors included Decelerating light control module $

10 BEL-RAY For more than 60 years, the Bel-Ray name has been synonymous with quality and performance. It is widely regarded as one of the few iconic brands within the racing community and powersports industry. From the front forks to the rear axle and everything in between, there is a specifically designed, tested and proven lubricant or treatment to keep your customers bikes running longer and stronger. Make sure you have a variety of choices always on hand. ALL-IN-ONE FUEL TREATMENT Formulated to maximize fuel efficiency while minimizing all fuel related problems Keeps fuel lines and components free of buildup and gummy residues Neutralizes ethanol s harmful effects in gasoline to resolve common issues such as low fuel economy, reduced engine power, and accelerated fuel system component deterioration Stabilizes gasoline for extended periods of storage in fuel containers or in tanks Increases the overall gasoline octane when paired with lower octane fuels is sold in 24-packs to dealers; is sold in 12-packs to dealers Suggested retail reflects each pricing oz. (24-pk) $ oz. (12-pk) BULLET RINGZ LED TURN SIGNALS Seven outer ring Genesis LEDs embedded into an aluminum chrome bezel 24 inner Genesis LEDs Uses existing buckets Fit bullet/deuce-style turn signals Sold in pairs CHROME 1156 BASE/SINGLE INTENSITY Red, red lens $ Red, smoke lens Red/amber, amber lens Red/amber, smoke lens BASE/DUAL INTENSITY Amber/white, amber lens Amber/white, smoke lens Amber/amber, amber lens Amber/amber, smoke lens Red/red, red lens Red/red, smoke lens BLACK BASE/SINGLE INTENSITY Red, red lens $ Red, smoke lens Red/amber, amber lens Red/amber, smoke lens BASE/DUAL INTENSITY Amber/white, amber lens Amber/white, smoke lens Amber/amber, amber lens Amber/amber, smoke lens Red/red, red lens Red/red, smoke lens WHISKEY THROTTLE ASSEMBLIES Cast aluminum clamshell and throttle tube Includes chrome-plated steel cable ferrules and plated Allen cap clamshell mounting hardware Available in two styles: single cable for custom applications or dual cable for retrofitment on OEM push/pull throttle cable assemblies Cable ferrules included with both styles are designed to fit stock H-D thread-in and clip-in cables Throttle grip tube is machined to accept rubber motorcycle grips SINGLE CABLE Polished $ Black BLACK WHISKEY THROTTLE SLEEVE CNC-machined 6061 T-6 aluminum CNC-machined cable channel has barrel openings for two cables Allows owners to replace the thick, generally uncomfortable stock molded one-piece grips with soft aftermarket grips For models (except FLHT/ $ FLHR/FLHX/FLTR, HD FL Trikes CV CARB TOP COVERS Hand-polished, investment cast CNC-machined 6061 T-6 billet aluminum available in gloss black powder-coated or raw polished aluminum or in polished stainless steel Fit CV carburetors on late model Harley-Davidson Sportster, Evolution, Twin Cam and custom applications where Keihin CV carb might be used Feature a classic, finned look or the popular rippled-water-droplet look; a classic styling element FOR H-D CV40/44 CARBURETORS RIPPLE Polished aluminum $ FINNED Polished aluminum Black powdercoat aluminum DUAL CABLE Polished $ Black REPLACEMENT CABLE FERRULES Set of

11 ELITE EDGE FLOORBOARDS Distinct, custom style Constructed of 6061 T-6 billet aluminum with rubber inserts Easy to install Available with new Rapture gloss black finish Sold in pairs Matching shifter pegs available separately (PART # ) NOTE: FLST/FLD models w/ passenger footpegs will require the use of OEM accessory floorboard mounts. FOR FLT, FLHT, FLHR, FLTR, H-D FL TRIKE, FLST, FLD Driver boards, Rapture gloss black $ FOR FLT, FLHT, FLST, FLD MODELS Passenger boards, Rapture gloss black ONE-PIECE TOURING SEAT WITH DRIVER S BACKREST Improved comfort for long rides Driver s portion of the seat is set back compared to the stock seat, for improved legroom on longer rides Driver s backrest is fully adjustable for height and pivots to match the driver s back angle Backrest pad measures 7.5" H 11" W Backrest can be removed without tools FOR 15 XG 500/ " W driver s seat, 9" W passenger seat $ REMOVABLE DRIVER BACKREST ASSEMBLIES The backrest post is notched, allowing four easy snap-in-place height adjustment positions (approximately 3") Folds completely flat for ease of getting on your motorcycle The contoured backrest pad pivots to match back angle of driver s back Backrest pad measures 7.5" W 11" H For use with Mustang Summit Touring Seat PART #s , , (sold separately) W/ chrome studs $ Vintage W/ black studs VINTAGE TOURING SEAT Upgrades the style and comfort of your ride Seat moves the rider up and back slightly to provide more legroom on longer rides Passenger seat area provides excellent comfort Vintage seat cover is made from the highest-quality expanded black vinyl FOR 15 XG 500/ " W driver s seat, 9" W rear passenger seat $ FASTBACK SEAT Give your bike a low, lean look with this streamlined seat Rider position is approximately 1" farther back than stock for improved legroom Top covering is made of high-quality expanded vinyl Offers reasonable passenger accommodations FOR 15 XG 500/ " W front, 7" W rear $

12 KLOCK WERKS We told you that Brian Klock and his team were not finished creating new Flare windshield styles for almost every ride and here is even more evidence of that. The latest offerings you see here include all of the same great features, design and testing that went into the Original Flare, now in designs for the latest H-D fairings. Be sure to have a variety of Flare windshields available when your customers come calling for them. FLARE LOW WINDSHIELDS Klock Werks has added another option to the patented Flare Windshield line for FLHT models Flare Low joins the already released 6.5", 8.5", and 11.5" options The original, patented Flare Windshield is still the best choice for improved air management, complementing the new vent/duct system in the batwing style HD fairing HD FLHT batwing style fairings sit 1" higher than 13 and earlier version which makes the Flare Low a great option The patented design features hips at the sides that re-route the wind away from riders while adding downforce to the front-end of the motorcycle to improve stability vs. riding with the stock windshield The flip at the top of the Flare redirects air back as clean, less turbulent air for rider and passenger Wind tunnel designed and tested Lexan Polycarbonate with FMR hard coating is used to create these custom-molded designs with unmatched durability All are predrilled for easy mounting using stock windshield hardware NOTE: The black version may not be suitable for shorter riders as it s an opaque material. The Klock Werks Flare Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S; International Patents: , , FOR FLHT, FLHX AND H-D TRIKE MODELS " dark smoke $ " black SADDLEBAG HINGE INSERTS Designed to replace the stock saddlebag reflectors on Dresser models Inserts are a quick and easy way to customize saddlebag hinges Just remove stock reflectors and press the special inserts into place Manufactured from 6061 billet aluminum and chrome plated Adhesive strips included for installation Sold in pairs FOR FLHT/FLHR/FLHX/FLTRX MODELS Limited, chrome $ Smooth HONEYCOMB FAIRING VENT SCREEN Accent the vent in the new HD vented fairing with Klock Werks Fairing Vent Screen Available in Honeycomb pattern mesh with raw aluminum finish Easy-to-install, and adds a custom touch to the front of your fairing Vent screen may even catch or stop larger bugs and other road debris from entering through your fairing vent Installation instructions and mounting adhesive included For 15 FLTRX/FLTRXS models $