CONTROL & HANDLEBARS CONTROL & HANDLEBARS HANDLEBAR CONTROLS BIKER S CHOICE CHOPPED HANDLEBAR CONTROL KIT BIKER S CHOICE HANDLEBAR CONTROL KITS

Transcription

1 HANDLEBAR CHOPPED HANDLEBAR CONTROL KIT Chrome-plated 9/16 bore single without switches Fits Sportster; Big Twin Note: minor wiring and control cable change required with master cylinder $ HANDLEBAR CONTROL KITS Chrome-plated finish Available with or without switches Without Switches FLT 15mm Bore with Audio & Cruise $ Softail, Dyna with 9/16 Bore Single Cable Clutch Sportster with 1/2 Bore Single (exc. XR 1200) FLT 11/16 Bore with Audio FLT 11/16 Bore with Audio & Cruise Sportster with 1/2 Bore Single Sportster; Big Twin with 9/16 Bore Single Sportster; Big Twin with 11/16 Bore Dual Sportster, Big Twin with 5/8 Bore Single Sportster, Big Twin with 3/4 Bore Dual With Chrome Switches Sportster; Big Twin with 9/16 Bore Single $ Sportster, Big Twin with 5/8 Bore Single Sportster, Big Twin with 11/16 Bore Dual Replacement Top Cover Gasket Sportster; Big Twin $2.50 BRAVO HANDLEBAR CONTROL KIT Billet aluminum Beautifully designed with a show chromed finish 11/16 brake master cylinder - cable clutch Accepts O.E.M. handlebar switch kits Fits 1 handlebars $ FINAL BLACK CUSTOM HANDLEBAR CONTROL KITS Features custom levers, perch and clamps Use without switch housings Smooth cap Fits custom applications with 1 handlebars 9/16 Bore with Cable Clutch $ /16 Bore with Cable Clutch Replacement Levers CHOPPED MASTER CYLINDERS Chrome cast aluminum Reservoir 1/4 shorter than stock Fits H-D models (exc. 04-Up Sportster; 08-Up Touring) 5/8 Bore Single Disc $ /16 Bore Single Disc /16 Bore Dual Disc

2 HANDLEBAR FINAL 280 CONTOURED HANDLEBAR WITH HYDRAULIC CLUTCH Hydraulic clutch Chrome-plated Switches and wiring not included Plain cap Fits Big Twin models Hydraulic Clutch 9/16, Brake 9/ $ Hydraulic Clutch 9/16, Brake 11/ Hydraulic Clutch 11/16, Brake 9/ Hydraulic Clutch 11/16, Brake 11/ HYDRAULIC CLUTCH CONVERSION KIT Complete handlebar kit to convert from stock cable clutch over to easy hydraulic clutch Chrome 30% less hand lever effort Step by step installation instructions included Big Twin Models $ Sportster Models CLUTCH LEVER & BRACKET ASSEMBLY Chrome Clutch Lever and Bracket Assembly FLT $ Sportster, Big Twin Sportster; Big Twin (exc Touring) Sportster Brake/Clutch Clamp Only Sportster, Big Twin H-D # $11.45 Hardware Kit H-D Lever Brackets H-D # $17.99 HANDLEBAR MASTER CYLINDERS Replacement O.E.M. type master cylinders accept stock handlebar switch covers and internal parts Chrome 1/2 Bore Sportster Single Disc $ /16 Bore Big Twin Single Disc H-D# $ /8 Bore L85-95 Big Twin Single Disc H-D# $ /16 Bore Includes sight window L85-95 Big Twin Dual Disc H-D# $ Big Twin Dual Disc H-D# /4 Bore Big Twin H-D# $ mm FLT $ Cover Gaskets Sold in packs of H-D Front Master Cylinder H-D# $17.95 Brake/Clutch Clamp Big Twin H-D# $11.45 HYDRAULIC CLUTCH MASTER CYLINDER 11/16 bore Chrome-plated Fit FLT; Softail models $ HANDLEBAR MASTER CYLINDER REBUILD KITS Note: # & do not come with cover gasket(h-d# ) FLT 15mm H-D # A $ Sportster with 1/2 Bore Single Disc H-D Models (exc XL; Touring) 9/16 Bore Single Disc H-D Models (exc XL; Touring) 11/16 Bore Dual Disc L85-95 FXRSP, FLHT Models Dual Disc (11/16 ) H-D# A XL, FX Models Single Disc (5/8 ) H-D# XL, FX, FXR; FL; 82-E85 FLT (3/4 ) H-D# Sportster, Big Twin H-D# BIKER S CHOICE NEW PART NUMBERS ARE RED

3 HANDLEBAR Clutch Brake ARLEN NESS RAD III HANDLEBAR Arlen Ness introduces the industry s first factory replacement full custom hand controls An evolution of the popular Rad II hand controls Complete kits include: master cylinder, brake lever, clutch perch and appropriate chrome switch housings (switches not included) Controls and switch housings accept all factory wires, cables, lines and switches Any Arlen Ness mirrors or grips are a great addition Available for single or dual disc models (except hydraulic clutch models); some kits available with cruise/radio functions for models originally equipped with those features Note: 9/16 bore is for single disc applications, 11/16 bore is for the dual disc applications Complete Kits Single Disc Models, 9/16 Master Cylinder $ Dual Disc Models, 11/16 Master Cylinder Dual Disc Models with Radio, Cruise and Intercom 11/16 Master Cylinder Individual Components 9/16 Brake Master Cylinder (Includes Lever) $ Cable Clutch Perch (Includes Lever) Replacement Clutch Lever Replacement Parts Replacement Brake Master Cylinder Cover $34.95 Standard Switch Set Switch Set with Radio and Cruise Control JAY J & IMAGE SERIES HANDLEBAR Chrome Solid, slotted and formed style levers Application Slotted Solid Retail J-Series 5/8 Bore Brake $ /16 Bore Clutch Hydraulic Cable Clutch Image-Series 5/8 Bore Brake $ /16 Bore Clutch Cable Clutch Master Cylinder Rebuild Kits ON PAGE FINAL ARLEN NESS & CLUTCH HANDLEBAR MASTER CYLINDERS CNC machined from 6061-T6 billet aluminum 5/8 bore for single disc applications Hydraulic clutch master cylinders feature 11/16 bore Custom 5/8 Bore $ Lever-Cable Clutch Petite Switch Style 5/8 Bore $ Petite Switch Style Perch-Cable Clutch $ Lever-Cable Clutch Replacement Levers Brake Lever $61.95 Cable Clutch Rebuild Kits 5/8 Rebuild Kit $

4 HANDLEBAR & SWITCH HOUSING Brake Light Banjo Bolt ON PAGE FINAL JAY CLAMP MOUNT HANDLEBAR Note: Footnote denotes replacement lever 3/4 Bore Brake - Master Cylinder - Solid Lever Sportster, Custom Big Twin - Polished $ /8 Bore Brake - Master Cylinder - Solid Lever H-D High Pressure Applications - Polished $ Sportster, Big Twin - Chrome , Cable Clutch Lever and Bracket - Solid Lever Matches Clamp Mount Master Cylinders - Polished $ Matches Clamp Mount Master Cylinders - Chrome /16 Bore Hydraulic Clutch - Solid Lever H-D with Hydraulic Clutch - Polished $ H-D with Hydraulic Clutch - Chrome , HANDLEBAR SWITCH HOUSINGS Chrome Includes 4 chrome allen head mounting screws Vertical Opening XL; FL; FX; FLT H-D # B $10.95 Horizontal Opening XL; FL; FX; FLT $10.50 Plain XL; FL; FX; FLT $11.95 JAY MASTER CYLINDER REBUILD KITS Includes all rubber parts (except the cover gasket) Fits 3/4 JayBrake Master Cylinders $23.99 Fits 5/8 JayBrake Master Cylinders Fits 9/16 JayBrake Master Cylinders Cover Gasket Fits all JayBrake Master Cylinders $ MASTER CYLINDER COVERS Fits XL; Dyna, Softail; Touring Stock H-D# $21.95 Smooth Teardrop Fits L79-95 H-D models Plain H-D# $8.95 Finned SWITCH HOUSINGS Chrome-plated O.E.M. type replacements Can be used on most 82-up models except those with radios Note: offers hole for clutch interlock XL, Big Twin $ V-Rod; XL, Dyna, Softail, Road King (exc. FXSTDSE, FLHRSEI) H-D# Softail, Dyna; V-Rod, XL, (exc. FXSTDSE, FXCW) BIKER S CHOICE NEW PART NUMBERS ARE RED

5 HANDLEBAR SWITCH HOUSINGS KURYAKYN SWITCH HOUSING These housings will accept stock H-D switches Add the Brake and Clutch Dress-Up Kit ( , or ) to complete your hand controls Sold as a set FLHTC; FLHX; FLTRX; FLHT; FLHXXX without Cruise (Mfg/N 7806) $ FLHTCU; FLHTK; FLTR; 2011 FLTRU; FLHRC; FLHTCUTG (Mfg/N 7807) VRSC, XL, XR, Dyna, FLHR (exc FLHRSE); Softail (exc FXSTDSE) Mfg/N Will also fit FLHR equipped with Cruise KURYAKYN & CLUTCH DRESS-UP KIT An inexpensive, fast and easy way to completely finish chroming most hand controls The clutch perch is a complete chrome replacement unit The master cylinder cover dresses up the reservoir and covers the entire visible hand brake bracket assembly Electra Glide, Road Glide, Street Glide, Tour Glide, Road King; Dyna; XL Dual Disc (Mfg/N 9119) $ Softail, Dyna Single Disc (Mfg/N 9126) Electra Glide, Road Glide, Street Glide; Trikes without Reverse (Mfg/N 1740) Sportster (Mfg/N 1741) KURYAKYN SWITCH HOUSING COVERS No disassembly They go right over the stock switch assemblies A perfect match when combined with Brake and Clutch Dress- Up Kit ( , or ) Note: For best appearance, must be equipped with Brake and Clutch Dress-Up Kit ( , or ) or Handlebar Reservoir Cover Sets (H-D# or ) FLHTC; FLHX; FLTRX; FLHT without Cruise (Mfg/N 7827) $ FLHTCU; FLHTK; FLTR; 2011 FLTRU; FLHRC (Mfg/N 7828) Will also fit FLHTC; FLHX; FLTRX; FLHT with Cruise OVAL MINI PUSH BUTTON HANDLEBAR KIT Chrome Includes 20 colored wiring, mounting hardware and Allen wrench Fits 1 handlebars $60.95 Switches ON PAGE 285 JAY INTEGRATED MICRO SWITCH CLAMP Chrome $ FINAL ARLEN NESS PETITE SWITCH CLAMPS Chrome Fits all Ness-Tech, JayBrake and Performance Machine handlebar master cylinders 2 button design can be used for a starter, turn signal, horn or kill switch Fits custom Sportster and Big Twin models Switch Clamp Sportster, Big Twin $ Replacement Switch Housing # $ Buttonhead Allen CUSTOM SWITCH COVER HARDWARE Allen Sportster; Big Twin $10.99 Button Head Sportster, Big Twin Models $

6 HANDLEBAR Chrome - Single Disc Chrome - Dual Disc FINAL These hand controls will add the finishing touch to your Harley- Davidson or custom application Easy to see your handlebar control switches at night with these patented amber L.E.D. backlit switches Features the new 08-up style handlebar control levers and master cylinder design Chrome-plated or black satin powder-coated aluminum diecast switch housings, clutch perch, bore master cylinder, lever blades and black switches with patented amber L.E.D. back lighting on the wording and symbols 60" long O.E.M. color-coded wire harness to install on to the tallest handlebars in the marketplace Throttle side complete with throttle clamp Comes with the clutch starting switch installed for 07-up models. For models it is optional to wire it in All of the switches are pre-installed into the switch housing to save you time Black - Single Disc BAGGER-WERX COMPLETE HANDLEBAR CONTROL KITS WITH BACKLIT AMBER L.E.D. SWITCHES Black - Dual Disc Includes all hardware, pin connectors and shrink tubing U.S.A. Patent Pending #12/783,852 & Taiwan Patent #M on the switches Fits Touring, Dresser, Bagger models and customs with dual disc Note: Only the Top switches are backlit. The lower Radio switches are not. Description Chrome Black Retail Single Disc 9/16 Master Cylinder $ Dual Disc 11/16 Master Cylinder $ /16 Master Cylinder with Audio /16 Master Cylinder with Audio & Cruise /16 Master Cylinder with Cruise Chrome Black BAGGER-WERX BACKLIT AMBER L.E.D. HANDLEBAR SWITCHES & WIRING HARNESS KITS Easy to see your handlebar control switches at night with these patented amber L.E.D. backlit switches Left and right side handlebar control switches with patented amber L.E.D. back lighting on the wording and symbols Installs easily into any Harley-Davidson or aftermarket standard style 1996-up switch housings Includes 60" long O.E.M. color-coded wire leads with pin connectors and wire diagram Long enough wire harness for the tallest of handlebars in the marketplace Comes with the clutch neutral starting switch for 07-up models. For models it is optional to remove it U.S.A. Patent Pending #12/783,852 & Taiwan Patent #M Fits Big Twin, Sportster models Note: Will also fit Touring models on top/upper switches only Chrome $ Black BIKER S CHOICE NEW PART NUMBERS ARE RED

7 HANDLEBAR SWITCHES TWIN POWER LATE STYLE HANDLEBAR SWITCHES Complete with 48 long O.E.M color-coded wire leads Stop/Start XL, Big Twin (Black) H-D# $ XL, Big Twin (Chrome) H-D# XL, Big Twin (Black) H-D# XL, Big Twin (Chrome) H-D# Brake Light XL, Big Twin Front H-D# $14.50 Switch Housing ON PAGE 282 Shrink Wrap Tubing ON PAGE 680 Dimmer/Horn XL, Big Twin (Black) H-D# $ XL, Big Twin (Chrome) H-D# XL, Big Twin (Black) H-D# XL, Big Twin (Chrome) H-D# Left Turn Signal XL, Big Twin (Black) H-D# $ XL, Big Twin (Chrome) H-D# XL, Big Twin (Black) H-D# XL, Big Twin (Chrome) H-D# Right Turn Signal XL, Big Twin (Black) H-D# $ XL, Big Twin (Chrome) H-D# XL, Big Twin (Black) H-D# XL, Big Twin (Chrome) H-D# Handlebar Switch Kit Includes left and right switches with 48 long O.E.M. color-coded wire leads XL, Big Twin (Black) $ XL, Big Twin (Chrome) XL, Big Twin (Black) XL, Big Twin (Chrome) Mechanical Stop Light Switches XL, Big Twin H-D# $ Softail, Touring; Dyna, XL H-D# Does not include audio or cruise control FINAL 285

8 HANDLEBAR SWITCHES B A TWIN POWER EARLY STYLE HANDLEBAR SWITCHES Run/Off A XL, Big Twin (Black) H-D# A $5.95 B XL, Big Twin (Chrome) High/Low C XL, Big Twin (Black) H-D# A $5.45 D XL, Big Twin (Chrome) Starter or Horn E XL; FL; FX H-D# A $4.95 Plain Rocker Switch F XL, Big Twin (Chrome) $6.50 H-D# D C E F Short Button Caps G XL; FL; FX (Black) H-D# $9.95 Long Button Caps Sold in packs of 10 H XL; FL; FX (Chrome) H-D# $16.95 I. E73 XL, FX; 72-E73 FL (Black) H-D# G I H J K Retaining Plate Screws Sold in packs of 25 J Sportster, Big Twin (6-32 x 1/4 ) H-D#2803W $2.95 Brake Switch Terminals Sold in packs of 10 K Sportster, Big Twin H-D# $1.99 Neutral Switch Terminal (Not Shown) L XL; 73-E79 FX; FLT; FXST H-D# $1.69 Mechanical Stop Light Switch M XL, FX; FL Front; XL Rear $ M FINAL TWIN POWER HANDLEBAR SWITCHES WITH WIRES 48 long handlebar wiring harness with switches is ready to install Fits Sportster, Big Twin $55.50 TWIN POWER REPRODUCTION HANDLEBAR SWITCHES Starter or Horn K, Sportster; FL H-D# TA $6.49 Light K, XL, FL (exc XLCH); H-D# T $ K, Sportster; 38-E79 FL H-D# TWIN POWER CUSTOM HANDLEBAR SWITCH Custom handlebar control switch features 3-way head lamp dimmer switch with integral horn button Fits XL, Big Twin handlebars $14.50 HANDLEBAR WIRING CLIPS Chrome Sold in packs of 4 3/8 I.D $7.99 1/2 I.D BIKER S CHOICE NEW PART NUMBERS ARE RED

9 CLUTCH LEVER BRACKETS & LEVERS CLUTCH LEVER BRACKET Chrome Clutch lever bracket has mounting hole for mirror Fits XL; FL; FX; FLT H-D# $12.95 DUAL SLOTTED LEVERS CNC machined Chrome-plated Softail, Dyna; 2007 Touring Models $ Sportster Models Big Twin; Sportster Models LEVER ASSEMBLY Hand-polished assembly D.O.T. approved ball end Handlebar clamp Fits XL brake; FL, FX clutch/brake H-D # A $33.99 O-SERIES LEVERS CNC machined Chrome-plated Softail, Dyna; 2007 Touring Models (5 Hole) $ Sportster Models (4 Hole) Big Twin; Sportster Models SLOTTED SKULL LEVERS Chrome-plated Fits Sportster, Big Twin $ Lever Covers ON PAGE FINAL BIKER'S CHOICE CUSTOM SLOTTED LEVERS Chrome-plated Fits Sportster, Big Twin $ /CLUTCH LEVERS Chrome-plated Sportster $ Sportster Softail, Dyna FLT H-D# (exc. Hydraulic Clutch Models) FLT (Black) H-D# (exc. Hydraulic Clutch Models) Anti-Rattle Clip On Clutch Lever 287

10 LEVERS REPLACEMENT HAND LEVERS Chrome-plated Direct O.E.M. type replacement Brake Sportster, Big Twin H-D # Chrome $ Sportster; Big Twin H-D# Chrome Clutch Note: # lever will fit models if used with H-D # nylon bushings Sportster, Big Twin H-D # T Chrome $18.99 Anti-Rattle Clutch Chrome Sportster, Big Twin H-D # $ Sportster; Big Twin (exc. V-Rod) H-D # KURYAKYN ZOMBIE LEVERS Comfortable contours and a dished back allow high leverage with minimal reach Additional emblems sold separately Note: When (Mfg/N 1047) is installed on a Softail or Dyna the brake lever will be positioned approximately 3/8 further from the handlebar than a stock lever Electra Glide, Road Glide, Street Glide, Road King, Trike with Cable Operated Clutch (Mfg/N 1058) $ Sportster (Mfg/N 1060) H-D Models with Cable Operated Clutch (exc ; Electra Glide, Road Glide, Street Glide, Road King XL, Trike) Mfg/N FINAL KURYAKYN TRIGGER LEVER SETS Chrome-plated Allows the forefinger to have a real grip making it more comfortable and easier to pull the lever Great for someone with small hands H-D Models (Mfg/N 1021) $ XL; Big Twin (exc. V-Rod) Mfg/N Electra Glide, Road Glide, Street Glide, Road King with cable operated clutch (Mfg/N 1056) Lever Covers ON PAGE 289 KURYAKYN EMBLEMS Sold individually Emblems can be changed on the Serpent shift linkage, Zombie levers (# , , ) or Fender Tip Lens Grill (# ) Universal applications with 1 diameter of flat surface Wild Boar (Mfg/N 1083) $8.99 Dollar Sign Bling (Mfg/N 1084) Eagle (Mfg/N 1085) Rose (Mfg/N 1086) Patriot (Mfg/N 1087) Ace of Spades (Mfg/N 1088) Skull (Mfg/N 1089) KURYAKYN BOSS BLADES Wide, deeply dished blades Shortest reach possible while still providing full range of motion Sculpted surfaces and chiseled ends Note: When BC# is installed on a 2008 Softail or Dyna the brake lever will be positioned approximately 3/8 farther from the bar than the stock lever Electra Glide, Road Glide, Street Glide, Road King, Trikes with Cable Clutch (Mfg/N 1057) $ Twin Cam with H-D Hydraulic Clutch; V-Rod Models (Mfg/N 1036) H-D Models with Cable Operated Clutch (exc XL, Dresser, Road King, Road Glide, Street Glide) Mfg/N KURYAKYN SILHOUETTE LEVERS Beautifully sculpted levers create a unique accent Very comfortable on the hands Note: When BC# is installed on a 2008 Softail or Dyna the brake lever will be positioned approximately 3/8 farther from the bar than the stock lever Electra Glide, Road Glide, Street Glide, Road King, Trikes with Cable Clutch (Mfg/N 1055) $ Twin Cam with H-D Hydraulic Clutch; V-Rod Models (Mfg/N 1019) H-D Models with Cable Operated Clutch (exc XL, Dresser, Road King, Road Glide, Street Glide) Mfg/N BIKER S CHOICE NEW PART NUMBERS ARE RED

11 LEVERS, COVERS & ANCHOR PINS MAGURA STYLE LEVER Chrome-plated Fits Sportster, Big Twin H-D # T $18.99 SHOW CHROME LEVER FRINGE Leather lace-up lever covers Adds extra comfort and style 12 long $16.95 THROTTLE ASSEMBLIES RIVER ROAD LEVER COVERS Black Fringes 16 long Fits all H-D models $32.95 ANCHOR PINS 2 bushings included per anchor pin Fits H-D clutch; H-D brake (exc FL) H-D# $13.95 FINAL THROTTLE ASSEMBLIES WITH GRIPS Chrome-plated ends Direct O.E.M. type replacement Assemblies may also be used for various custom applications Single Cable Sportster, Big Twin (exc. 74 FL) H-D# $25.45 Dual Cable 81 H-D Models; Custom Applications H-D# B $25.95 CUSHION GRIP THROTTLE ASSEMBLIES Feature soft cushion grips which help to absorb vibration and eliminate tingle for greater rider comfort Chrome-plated steel ends Single cable Fits Sportster, Big Twin (exc. 74 FL) Note: For replacement grip covers only, order # H-D# $31.50 THROTTLE ASSEMBLIES Chrome May be used for various custom applications or stock replacement Grips not included Single Cable Sportster, Big Twin (exc. 74 FL) H-D # $12.50 Dual Cable 81 H-D Models; Custom Applications H-D # B $

12 THROTTLE KITS & FITTINGS FINAL INTERNAL CONTROL KITS Made with high quality components to ensure trouble free operation and installation Uses left side grips Fits 1 handlebars Note: Requires cutting 4 off end of handlebars Internal Throttle Kit $ Internal Clutch Kit THROTTLE CLAMPS Chrome-plated Includes chrome hardware Threaded throttle cable hook-up Single Sportster, Big Twin Models $11.95 Dual Custom Applications $10.95 MOTION PRO CABLE FITTINGS KIT Handy shop kit with 14 most commonly used cable fittings $ ARLEN NESS ROLLER BEARING THROTTLE KIT FOR FACTORY STYLE THROTTLE TUBES Turning your throttle has never been easier or smoother Design allows your factory throttle tube to ride on a roller bearing instead of dragging on your handlebar Note: Requires cutting 1/2 from the right side of handlebar $23.95 THROTTLE ADJUSTING SCREW Chrome-plated Includes spring Fits all stock throttles and Biker s Choice custom grip sets Sold in packs of 10 Fits XL, Big Twin H-D# A $18.95 CRUISE CONTROL FOR HARLEY-DAVIDSON MODELS Made from durable Zytel nylon Easily installs in minutes without grip removal Simple thumb lever on/off operation Eliminates hand and wrist fatigue on long rides Fits most Indian and 1990 and newer Harley-Davidson models $35.95 BIKER S CHOICE NEW PART NUMBERS ARE RED

13 GRIPS CHROME & LEATHER GRIPS Soft, comfortable grip 5 long Fits 1 handlebars $ TEXTURED GRIP SET Textured, molded foam grips Leather-like appearance Closed-cell material will not absorb moisture Much more durable than standard cushion grips Chrome-plated steel ends Note: Will not fit models equipped with front fork air control accumulator in handlebar XL, Big Twin (exc. 74 FL) $24.50 With Throttle Sleeve XL, Big Twin Dual (exc Touring) $25.95 INTRUDER GRIPS CNC 6061-T6 aluminum Beautifully chrome-plated Fits H-D dual cable with 1 handlebars $76.95 CHROME-N-CUSHION DIAMOND GRIPS Chrome-plated Soft rubber inserts Includes throttle sleeve XL, Big Twin (Single) $ CUSHION GRIPS Manufactured from closed-cell foam Grips will not absorb water, fade or crack Chrome-plated steel ends Note: Will not fit models with front fork air control accumulator in handlebar Sportster, Big Twin (exc FL) H-D# $19.45 With Throttle Sleeve XL, Big Twin Single $ XL, Big Twin Dual (exc. 08-Up Touring) Replacement Covers Only Fit Cushion Grips (Closed Cell Foam) $ DUAL THROTTLE GRIPS Chrome-plated Soft rubber inserts Fits H-D dual cable Sensation $84.50 Twisted CHROME-N-CUSHION RAIL GRIPS Chrome-plated Soft rubber inserts Includes throttle sleeve Fits XL, Big Twin (Single) $31.95 O.E.M. STYLE REPLACEMENT GRIPS Molded black rubber Note: Left grip may need to be altered slightly to fit models with front fork air control accumulator in handlebar Sportster, Big Twin (exc FL) H-D# A $8.50 With Throttle Sleeve XL, Big Twin Single $ XL, Big Twin Dual (exc Touring) ROCKET GRIPS Chrome-plated Billet aluminum Fits H-D dual cable $ TORNADO GRIPS CNC made from billet aluminum and chromed finish Features special anti-vibration and nonslip rubber for added comfort while riding in any weather condition Fits H-D dual cable with 1 handlebars Chrome $81.95 Black FINAL 291

14 GRIPS Black AVON GRIPS CUSTOM CONTOUR GRIPS Great feel and ergonomic design Billet end caps Seamless rubber grip technology Fits 81-Up H-D Models H-D with Chrome Description Fly By Wire Throttle Slide Retail Black Anodized $59.95 Chrome AVON GRIPS CUSTOM CONTOUR SPIKE GRIPS Billet spike end caps and rings Ergonomic seamless rubber grip Embossed Tribal logo on Tribal series Fits 81-up H-D models H-D with Description Fly By Wire Throttle Slide Retail Custom Contour Chrome $69.95 Black Anodized Tribal Contour Chrome $69.95 Black Anodized FINAL 292 AVON GRIPS AIR CUSHION GRIPS WITH AVON BOSS Billet end caps and rings 3-ring air cushion design Ergonomic seamless rubber grip New Avon Boss throttle assist provides a more comfortable riding experience Fits 81-up H-D models H-D With Description Fly By Wire Retail Throttle Slide Retail Chrome $ $77.99 Black Anodized AVON GRIPS VELVET AIR CUSHION GRIPS Billet end caps and rings 3-ring air cushion design Soft and smooth velvet like surface Ergonomic seamless rubber grip Made in the USA Fits 81-Up H-D Models H-D With Description Fly By Wire Retail Throttle Slide Retail Black Anodized $ $59.99 Chrome Chrome AVON GRIPS AIR CUSHION GRIPS Billet end caps and rings 3-ring air cushion design Ergonomic seamless rubber grip Fits 81-up H-D models Black H-D With Description Fly By Wire Retail Throttle Slide Retail Chrome $ $59.95 Black Anodized AVON GRIPS VELVET AIR CUSHION GRIPS WITH AVON BOSS Billet end caps and rings 3-ring air cushion design Soft and smooth velvet like surface Ergonomic seamless rubber grip New Avon Boss throttle assist provides a more comfortable riding experience Fits 81-up H-D models H-D With Description Fly By Wire Retail Throttle Slide Retail Chrome $ $77.99 Black Anodized BIKER S CHOICE NEW PART NUMBERS ARE RED

15 GRIPS AVON GRIPS BOSS PERFORMANCE GRIPS New Boss Performance grips are truly the most ergonomic grips manufactured for the V-Twin market Incorporating the Bottle shape as well as a built in throttle assist, these grips even include an undercut area for your fingers to fit into First grab on to these grips and you will think they were made just for your hands Made in the USA Fits 81-up H-D models H-D With Description Fly By Wire Retail Throttle Slide Retail Billet Chrome $ Billet Black Anodized Rubber/Chrome $ Rubber/Black Anodized AVON GRIPS CUSTOM CONTOUR WITH NEW AVON BOSS Great feel and ergonomic design Billet end caps Seamless rubber grip technology New Avon Boss throttle assist provides a more comfortable riding experience Made in the USA Fits 81-up H-D models H-D With Description Fly By Wire Retail Throttle Slide Retail Chrome $ $77.99 Black Anodized AVON GRIPS BOSS THROTTLE ASSIST Provides a more comfortable riding experience Works with both Avon H-D grips on throttle side Available in chrome and black anodized Chrome $20.00 Black Anodized AVON GRIPS FLAME TEXTURED GRIPS Seamless rubber grip Fits 81-up H-D models Fly By H-D With Description Wire Retail Throttle Slide Retail Chrome $ $59.99 Black Anodized AVON GRIPS OLD SCHOOL GRIPS Premium quality Old school style Fits 81-up H-D models H-D with Description Throttle Slide Retail 1 Bars Retail Old School Black $22.95 Jack Hammer $20.95 Waffle AVON GRIPS V-CRUISER GRIPS Double leather grain texture made from soft durable rubber Traditional look and feel Billet chrome end caps and rings Fits 81-up H-D models H-D with Throttle Slide $38.99 H-D with Fly By Wire FINAL 293

16 FINAL 294 KURYAKYN ISO -FLAME GRIPS Unique flamed pattern in the soft and cushy raised rubber pads Finished off with a Maltese Cross emblazoned end cap and knurled trim ring Accepts ISO -Throttle Boss H-D Models with Dual Cable Throttle Control (Mfg/N 6260) $ H-D Models with Electronic Throttle Control (All Dresser, Road King, Road Glide, Street Glide, Trike) Mfg/N KURYAKYN TRANSFORMER GRIPS Bright chrome grip bodies and sculpted end caps provide a solid feel, while contrasting soft black rubber inlays absorb vibration and provide comfort for miles on end Transformer Grips also allow you to match any Kuryakyn theme parts already used on your bike with interchangeable Widow, Zombie or Maltese Cross medallions included with each pair Throttle Boss (fits left or right grip) sold separately Grips sold in pairs H-D Models with dual cable throttle control (Mfg/N 6291) $ H-D Models with electronic throttle control (Mfg/N 6293) Transformer Throttle Boss (Mfg/N 6294) Smooth Trim Rings (Mfg/N 6364) KURYAKYN ZOMBIE GRIPS Smooth chrome bodies with vibration absorbing rubber inserts assure a comfortable and secure grip Zombie end caps enhance the specter of evil Premium Zombie Grips with Throttle Boss H-D Models with dual cable throttle control (Mfg/N 6295) $ H-D Models with electronic throttle control (Mfg/N 6297) Zombie Grips without Throttle Boss H-D Models with dual cable throttle control (Mfg/N 6296) $ H-D Models with electronic throttle control (Mfg/N 6298) Replacement Zombie End Cap Kit $20.99 GRIPS KURYAKYN PILOT GRIPS Comfortable raised rubber pads provide a secure grip area Chrome body adds a subtle accent to highlight other accessories Fits all H-D with dual throttle cables Pilot Grips with Throttle Boss H-D Models with Dual Cable Throttle Control (Mfg/N 6204) $74.99 Pilot Grips without Throttle Boss H-D Models with Dual Cable Throttle Control (Mfg/N 6203) $ H-D Models with Electronic Throttle Control (All Dresser, Road King, Road Glide, Street Glide) Mfg/N KURYAKYN ISO GRIPS Styled to match the popular ISO -Pegs, they dampen handlebar vibration while providing a sure, cushioned feel for long haul comfort Removable end caps allows for use with stock air reservoir type handlebars Premium ISO - Grips with Chrome Accent Rings with Throttle Boss H-D Models with Dual Cable Throttle Control (Mfg/N 6212) $ H-D Models with Electronic Throttle Control (All Dresser, Road King, Road Glide, Street Glide, Trike) Mfg/N ISO - Grips with Chrome Accent Rings without Throttle Boss H-D Models with Dual Cable Throttle Control (Mfg/N 6205) $ H-D Models with Electronic Throttle Control (All Dresser, Road King, Road Glide, Street Glide, Trike) Mfg/N ISO Grips Black H-D Models with Dual Cable Throttle Control (Mfg/N 6320) $ H-D Models with Electronic Throttle; Electra Glide, Street Glide, Road Glide, Road King, Trike; 2011 FLSTSE (Mfg/N 6321) KURYAKYN WIDOW GRIPS Designed with style and comfort in mind Mfg/N 6276 Fits H-D Models with electronic throttle control; Electra Glide, Road King, Road Glide, Street Glide and Trikes $99.99 ISO Throttle Boss ON PAGE 299 BIKER S CHOICE NEW PART NUMBERS ARE RED

17 GRIPS KURYAKYN BRAIDED GRIPS Get the custom look that works with these braided grips Made from a soft synthetic rubber that provide exceptional comfort that s made to last Available in 3 color combinations Designed to work with all 4-screw grip accessories that fit Kuryakyn ISO grips Fits H-D Models with Cable Throttle Control Black/Black (Mfg/N 6330) $69.99 Black/Red (Mfg/N 6331) Black/Blue (Mfg/N 6332) Fits H-D Models with Electronic Throttle Control; Electra Glide, Road Glide, Street Glide, Road King, Trikes; FLSTSE Black/Black (Mfg/N 6333) $69.99 Black/Red (Mfg/N 6334) Black/Blue (Mfg/N 6335) ARLEN NESS DEEP CUT COMFORT GRIPS Finest in style and comfort at half the price Conical billet grip bodies are machined to perfection and finished in chrome or black anodized finishes Innovative rubber inserts have a soft air cushion feel that dampens vibration for a comfortable ride Matching foot pegs are sold separately Description Chrome Black Retail Cable Style $ FLH, FLT Models Engraved, Dimpled Chromed ARLEN NESS SOFT TOUCH GRIPS Premium hand grips look and feel great Engraved, Dimpled Black Smooth, Dimpled Chromed Made in the USA from the finest materials such as Kraton rubber and billet aluminum end caps and collars Throttle sleeve included for cable or fly by wire applications Matching foot pegs and shifter pegs, sold separately Description Chrome Black Retail Fits Sportster, Big Twin models (exc FLH, FLT) Scalloped, Knurled $59.95 Scalloped, Dimpled Rubber Engraved, Dimpled Rubber Smooth, Dimpled Rubber Fits FLT models Scalloped, Knurled $59.95 Scalloped, Dimpled Rubber Engraved, Dimpled Rubber Smooth, Dimpled Rubber Scalloped, Dimpled Chromed Scalloped, Knurled Chromed Smooth, Dimpled Black Scalloped, Dimpled Black Scalloped, Knurled Black FINAL 295

18 GRIPS ARLEN NESS GRIPS Designed to fit the contour of your hands Chrome finish Fits H-D models (exc FLH, FLT) Torpedo $ Horizontal Billet Deep Cut - Black FINAL 296 Black Chrome LA CHOPPERS HEX TEX GRIPS WITH COMFORT PADS Visually dynamic and ergonomically comfortable Raised comfort pads reduce grip effort Faceted surface reflects light, adding an exciting visual element Textured surface reduces hand fatigue by stimulating circulation No other grip provides such dynamic form and function Machined from billet aluminum Available in a show chrome or bright-dip black anodized finish Direct replacement for stock grips Black $ Chrome ARLEN NESS BILLET GRIPS CNC machined from 6061-T6 billet aluminum Twisting the throttle has never been smoother or easier Chrome finish with some styles available in black anodized Fits FLH, FLT Description Chrome Retail Black Retail Battistini Round $ $ Battistini Oval Rocket Retro Diamond Flatband BIKER S CHOICE NEW PART NUMBERS ARE RED

19 GRIPS GRAB-ON DELUXE ROAD GRIPS 1 x 6 quality foam road grips with chrome end caps 2-year manufacturer s warranty $33.19 Dovetail PROGRIP SKULL GRIP Chromed plastic skull end-caps Super comfortable rubber grip Fits 1 bars $18.19 PROGRIP TOURING GEL GRIP MODEL 862 Designed with touring comfort in mind Chrome-plated ends Fits 1 bars $16.79 Wide Band Solid JAY BILLET GRIPS CNC machined billet aluminum Chrome Fits H-D single or dual cable Dovetail $ Wide Band Solid PRO-0NE MILLENNIUM BILLET GRIPS Chrome-plated billet aluminum Comfortable hand contour Fits H-D dual throttle (except models with air reservoir in handlebar) $99.95 PROGRIP CRUISER STREET GRIP MODEL 842 Super soft and durable with great adhesion Gel molds to hands as pressure is applied Black with gray base and chromed end Inserts fit 1 bars $15.99 PROGRIP CRUISER CHROMED RUBBER GRIP MODEL 866 Super soft and durable chromed rubber Billet look with the comfort of a gel grip Fits 1 handlebars Chromed $42.99 Chromed Red Chromed Blue FINAL 297

20 HEATED GRIPS SYMTEC POWER DEMON DC VOLTAGE CONTROLLERS Controls DC voltage supply for adjusting the temperature levels of all heated accessories DC jack assembly is mounted on the horn bracket and the Power Demon controller is mounted on the throttle side of the handlebars Allows selection of 4 levels of heat without taking eyes off the road for adjustment Heat level displayed by 4 colored L.E.D.s which can be dimmed at night White L.E.D.s illuminate perimeter of DC jacks on the horn bracket to show where plugs are at night Available in a sleek and stylish chrome or black versions Easy to install Description Chrome Retail Black Retail H-D Left Mount $ $ SYMTEC HEAT DEMON MOTORCYCLE HAND WARMERS Complete motorcycle hand warmer kit with HI/LO heater Fits under existing grips Maximum 43 watt at 14 volts High/low/off switch Fits most models Metal Toggle Switch $49.95 Round Toggle Switch HOT GRIPS Black Electric heated grips made of Kraton GTM thermoplastic rubber Includes Off-Low-Hi switch and simple instructions 1 bar and ID, 4.75 L Fits H-D models $ FINAL 298 SYMTEC HEAT DEMON GRIP WARMERS Heaters install inside the handlebar allowing for use with any grip Attractive weatherproof design Available in black or chrome Custom controller with 4 levels of heat Fast warm up 4 color L.E.D. lights indicate the heat level selected (dims for night riding) Thermistor feedback keeps the grip heat at the selected level regardless of the voltage variation or ambient conditions Can be installed on 1 aluminum handlebars Description Chrome Retail Black Retail H-D Standard Throttle 1 Left Mount $ $ H-D Standard Throttle 1 Right Mount H-D Electric Throttle 1 Left Mount H-D Electric Throttle 1 Right Mount H-D Electric Throttle 1-1/4 Left Mount H-D Standard Throttle 1-1/4 Left Mount H-D Standard Throttle 1-1/4 Right Mount Universal (Metric) Left Mount SHOW CHROME HEATED GRIPS Perfect way to keep your hands warm while riding during cold weather conditions Comfortable, warm, durable non-slip grips allow the rider to vary the degree of warmth with the variable position Hi/Med/Lo/Off rheostat switch Fits 1 bars Pre-2008 H-D models $84.99 FIRSTGEAR SINGLE, SEMI-MOUNTED HEATED GRIP HEAT-TROLLER Designed to variably control heated grips or thumb-warmer or heated seats Designed to be mounted to a 12-volt DC vehicle without drilling holes Hook-and-loop the switch anywhere on a 12-volt DC motorcycle or ATV $79.95 FIRSTGEAR SINGLE, MOUNTED HEATED GRIP HEAT-TROLLER Designed to variably control heated grips or thumb-warmer or heated seats Designed to be mounted to a 12-volt DC vehicle Requires drilling of holes for switch and L.E.D $59.95 BIKER S CHOICE NEW PART NUMBERS ARE RED

21 GRIP KURYAKYN CONTOURED ISO THROTTLE BOSS Updated styling combined with a larger surface area and pad Designed for more comfort than the original while still easing hand and forearm fatigue Fits Kuryakyn ISO, ISO -Flame and Transformer grips Chrome (Mfg/N 6299) $19.99 Black (Mfg/N 6318) KURYAKYN UNIVERSAL ECONO-THROTTLE ASSIST Allows you to relax your grip on the throttle making pins and needles and fatigue a distant memory Simple design emphasizes reliable function over flashy complex styling Variety of interchangeable rubber inserts allows use with most grip configurations Mfg/N 6218 Universal fit: All O.E.M. grips and aftermarket grips with minimum 1-1/8 to maximum 1-3/4 outside diameter $29.99 KURYAKYN MECHANICAL THROTTLE CRUISE ASSIST Simple and clean looking throttle position holder Spring loaded tensioner makes it easy to set without over tightening for easy throttle shut down when needed Add the left side for a bar end weight matched pair and ride on in comfort Fits All H-D Models with 1 or 7/8 handlebars with hollow bar ends, O.E.M. or Kuryakyn ISO, Transformer style grips (exc Touring Models with electronic throttle, heated grips or air reservoirs in handlebars) Note: Proper installation may require cutting or drilling a 5/8 hole in the end of the O.E.M. grips. Proper installation requires 7/8 or 1 handlebars that have open ends. Mechanical Throttle Cruise Assist (Mfg/N 6285) $89.99 Matching Bar End Weight (Mfg/N 6288) KURYAKYN UNIVERSAL THROTTLE BOSS Designed to fit any type or size grip Can be installed in seconds Provides a cushioned platform for your palm Allows the driver to vary or maintain a speed without keeping a tight grip on the throttle Reduces muscle fatigue and discomfort Removes quickly, stow in a jacket pocket or tool pouch Mfg/N $12.99 Shown mounted to grip KURYAKYN ISO THROTTLE BOSS Small adjustable paddle that is positioned under the palm of the rider s throttle hand Allows rider to slightly relax hand grip on throttle and still maintain a constant speed Reduces stiffness and fatigue after prolonged cruising at a steady speed Must be used with Kuryakyn ISO Grips # Individual Chrome (Mfg/N 6250) $19.99 Pair (Mfg/N 6253) Individual Black (Mfg/N 6319) CRAMPBUSTER Full throttle control with a relaxed hand Reduces hand fatigue and cramping Comfortably fits your hand Easier throttle operation Eliminates throttle creep Doesn t lock throttle on CrampBuster will rotate forward with ease, yet when downward pressure is applied by your hand, the throttle is regulated effortlessly and accurately - without squeezing Starter pack includes 3 of each size Sold in box of 12, retail priced individually Black Standard 1-1/8 (All Standard Size Grips) $10.95 ea. Standard Wide (All Standard Size Grips) ea. Oversized 1-1/ ea. Oversized 1-1/2 Wide ea. Starter Pack ea. Chrome Standard Wide (All Standard Size Grips) $10.95 ea. Oversized 1-1/2 Wide ea. FINAL 299

22 GRIP HANDLEBAR GRIP END PLUGS Chrome Sturdy steel end plugs 62-E83 XL, Big Twin H-D # $6.95 KURYAKYN GRIP END WEIGHTS Installs quickly on the end of grip adding mass and length to reduce high amplitude handlebar vibration Bright chrome finish Fits ISO, ISO -Flame and Transformer grips Grip End Weight (Mfg/N 6338) ea $21.99 Grip End Weight (Mfg/N 6238) pr KURYAKYN STILETTO END CAPS Simply replaces the existing end cap on Kuryakyn ISO or ISO -Flame grips Screws supplied for use with or without ISO -Throttle Boss Mfg/N $39.99 KURYAKYN POINTED END CAPS Chrome Mfg/N 6336 Fits Kuryakyn Braided grips and ISO grips $39.99 RIVER ROAD GRIP COVERS Black Fringes 16 long Fits all H-D models $49.95 FINAL NATIONAL CYCLE HAND DEFLECTORS Hand Deflectors are an easy-to-install solution for keeping your hands warm and dry when riding in cold weather Deflectors are secured to the control boss of your mirrors, allowing plenty of room for brake and clutch lever access Fitments for a wide range of H-D models Application P/N Mfg/N Retail FXSTB; FLHR/FLHRC; FLHT; FL; FLSTC N5541 $ FX Softail (exc. FXSTB, FXS Blackline); FXD/Dyna (exc. FXDF); 80-85, Wide Glide; FLSTFB; FLSTS; XL N XL N BIKER S CHOICE NEW PART NUMBERS ARE RED

23 HANDLEBAR DIMENSION CHART Note: The following diagrams and terms explain how Biker s Choice measures the handlebars listed in this catalog. Center Width Horizontal dimension of the straight tubing between the lowermost bends in the bar Measured on the top side of the bar Width Overall width of the bars from end to end Rise Vertical dimension (height) of the bar measured from the bottom to the highest point on the bar (viewed from the side with the front face of the bar positioned vertically) Pullback Horizontal dimension from the front face of the bar to the rearmost point on the bar Measured in a front to rear direction (viewed from the side with the front face of the bar positioned vertically) 1-1/4 FAT RISER BARS 1-1/4 thick Smooth swaged design Risers are 3-1/2 centers Pre-drilled, dimpled for wiring Works with all standard controls, grips and risers Clearance for hydraulic clutch control Polished and chromed finished Welds at risers, polished smooth Diameter 1/2-13 thread End Center Application Width Rise Width Pullback P/N Retail 6 Riser $ Riser Riser Width Center Width Pullback Rise 1-1/2 FAT RISER BARS 1-1/2 thick Risers are 3-1/2 centers Pre-drilled, dimpled for internal wiring Works with all standard controls, grips and risers Polished and chromed finished Welds at risers, polished smooth 1/2-13 thread End Application Width Rise Pullback P/N Retail 7 Riser $ Riser FINAL Cables ON PAGE 342 Wiring Kits ON PAGE Opening Width Z Chrome-plated Accepts 1 controls No dimple Top Opening End Description Width Width Rise Pullback P/N Retail 1 Diameter $ Diameter Opening Width 301

24 Smooth Swaged Design FINAL /4 FAT BARS 1-1/4 thick Smooth swaged design Pre-drilled, dimpled and knurled for internal wiring Works with all standard controls, grips and risers Polished and chromed or black finished NOTE: When mounting an 1-1/4 diameter handlebar with a 1 center mounting section, a solid clamp must be used to properly support the bar and prevent breakage. End Center Application Width Rise Width Pullback Chrome Retail Black Retail Road King FL Models Throttle By Wire $ Dresser Dresser FL Models Throttle By Wire Bagger 10 Ape FL Models Throttle By Wire Bikini Beach $ Bikini Beach FL Models Throttle By Wire Dragster Bar Dragster FL Models Throttle By Wire Springer Dragster Ape Ape FL Models Throttle By Wire Springer Ape Ape Ape FL Models Throttle By Wire Ape Ape FL Models Throttle By Wire Ape Ape FL Models Throttle By Wire Ape Ape FL Models Throttle By Wire Ape Ape FL Models Throttle By Wire BIKER S CHOICE NEW PART NUMBERS ARE RED

25 Hi-Boy High Buckhorn Pre 77 Med. Buckhorn Low Buckhorn Wide Boy CUSTOM V-TWIN Superbar Drag Bar High Buckhorn Black Drag Bar Black Polished and chromed or black finish Available with dimples for wiring All styles are 1 diameter Not knurled Dimple Center End Description Width Width Rise Pullback Standard Retail Dimpled Retail High Buckhorn $ $85.50 High Buckhorn (Black) Med. Buckhorn Low Buckhorn Superbar Pre Drag Bar Drag Bar (Black) Hi-Boy Wide Boy MILER 1 diameter Bars pull back closer to the rider with a low rise for excellent comfort Center End Application Width Width Rise Pullback P/N Retail Smooth Pre 81 Models $76.95 Dimpled Models $76.95 Cables Wiring Kits ON PAGE 342 ON PAGE 676 FINAL FLH TOUR BARS Wide, comfortable bars for Dressers 1 diameter DRAG BARS 30 bends Application Width Rise Pullback Standard Retail Dimpled Retail FLH Tour Bar / $35.95 Drag Bars 24-1/ $

26 FINAL 304 TRIPLE CHROME T-BAR Triple chrome-plated and polished steel handlebars CNC robot welded and bent Smooth tapered down ends on 1-1/4 T-Bars Bars are drilled and features a pre-run wire inside to easily and quickly pull wiring through 3-1/2 spaced risers Description Rise Width Pullback P/N Retail 1-1/4 T-Bars $ /4 T-Bars /4 T-Bars /2 T-Bars /2 T-Bars TRIPLE CHROME 1-1/4 Triple chrome-plated and polished handlebars CNC robot welded and bent Smooth tapered ends flow into the hand controls Bars are drilled and features a pre-run wire inside to easily and quickly pull wiring through Knurled riser clamp area Center Description Width Rise Width Pullback Dimpled Retail Dresser / $ Dragster Bars Dragster Springer Bars Ape Springer Ape Ape Ape Ape BIKER S CHOICE NEW PART NUMBERS ARE RED

27 Low Buckhorn Med. Buckhorn Superbar Drag Bar High Buckhorn Hi-Bar TRIPLE CHROME 1 Triple chrome-plated and polished handlebars CNC bent for accuracy Smooth tapered ends flow into the hand controls Available standard or dimpled Bars are not knurled (exc. 16 & 18 Ape) Center Wide Bar Description Width Width Rise Pullback Dimpled Retail Standard Retail Low Buckhorn $ $66.95 Medium Buckhorn High Buckhorn Super Bar Pre Drag Bar Hi-Bar Wide Bar Ape Springer - Knurled Ape - Knurled DRESSER STYLE BARS Double bend design allows pullback clearance for FLT/FLHT/FLHX Drilled for internal wiring, accepts stock handlebar clamp, risers and controls Notched for electronic throttle control Available in 1 or 1-1/4 diameter Available in chrome or black powder-coated Made in the USA For FLHT, FLHX, FLHR, FLTR, FL Trikes Note: On 2007 and earlier fitment, electrical wiring must be run internally. Wiring Kit ON PAGE 676 End Center Application Width Rise Width Pullback Black Chrome Retail 1 Diameter Handlebars 13 Dresser Ape $ Dresser Ape /4 Diameter Handlebars 13 Dresser Ape $ Dresser Ape Cables ON PAGE 342 FINAL 305

28 LA CHOPPERS LA CHOPPERS HEFTY 1-1/4 diameter high-grade steel tubing Design for stock 1 controls Center section is 1-1/4 diameter (must use 1-1/4 riser for mounting) Dimpled and drilled for external or internal wiring Can be use with hydraulic clutch set-ups Available in hand polished chrome or black powder-coated finish Uses stock grips and hand controls End Center Application Width Rise Width Pullback Chrome Retail Black Retail Beach Bar $ Ape $ Ape Ape Ape Must use 1-1/4 risers for mounting Chrome Black Risers ON PAGE 323 FINAL LA CHOPPERS NICE CURVES A welcome change in design to the 2 most popular sizes of traditional ape hangers Available in 1 or 1.25 thickness in both chrome and black powder-coated finish Dimension: 12 or 16 tall, 32 width, 8.5 center width, 7 pullback Description Chrome Black Retail 1 Handlebars 12 Height $ Height /4 Handlebars 12 Height $ Height Wiring Kit ON PAGE 676 Cables ON PAGE 342 BIKER S CHOICE NEW PART NUMBERS ARE RED

29 LA CHOPPERS LA CHOPPERS 1 EVENFLOW Flowing lines and classic looks trademark this handlebar as a sure fire way to add comfort and class to any bike Exit hole drilled on the bottom for internal wiring Chrome finish Dimensions: 32 wide, 11 tall, 9 pullback $ LA CHOPPERS PrimeApes 13 A stellar custom handlebar itching to hit the streets Accommodates both electronic and cable throttles Drilled for internal wiring Available in chrome or gloss black Dimensions: 39 wide, 13 tall, 7 pullback NOTE: The PrimeApes for FLH are especially designed to fit with the Batwing Fairings Description Chrome Black Retail FLH with Batwing Fairing $ FLT, Softail, Dyna, XL LA CHOPPERS THROTTLE BY WIRE APE HANGERS 1-1/4 diameter high-grade steel tubing Designed for early and late models H-D stock 1 controls Mounting section is 1 in diameter Notched for electronic throttle and drilled for internal wiring Can be used with hydraulic clutch setups Hand polished and beautifully chrome finished Dimensions: 40 wide, 12 center width, 8 pullback Description Chrome Black Retail $ LA CHOPPERS THROTTLE BY WIRE FL APE HANGERS Specially designed for Batwing fairings, providing unique low profile bends that provide proper clearance without sacrificing the look of traditional ape hangers Available in chrome or black finish Available in 10, 12, 14, 16, 18 and 20 rises Specifically for Touring models with throttle by wire Dimensions: 40.5 wide, 14 center width, 10 pullback Description Chrome Black Retail $ FINAL 307

30 WILD 1 Wiring Kits ON PAGE 676 Cables ON PAGE 342 FINAL WILD 1 CHUBBYS LOW PROFILE DRAG 1-1/4 thick diameter Pre-drilled for internal wiring Works with early and late model stock controls and grips, most custom controls and custom grips Show chrome finish or black powder-coated Welds at risers, polished smooth End Pull- Style Width Rise back Black Chrome Retail Low Profile $ WILD 1 CHUBBYS DRAG BARS WITH RISERS 1-1/4 thick diameter Risers are 3-1/2 center to center Pre-drilled for internal wiring, dimpled Integral threaded 1/2-13 insert Works with all standard controls, grips and risers Show chrome finish or black powder-coated Available in 6, 8 or 10 rise Welds at risers, polished smooth End Center Pull- Style Width Rise Width back Black Chrome Retail 6 Drag $ Drag Drag WILD 1 PHYSCO CHUBBYS CHOPPER T-BAR 1-1/4 thick diameter 1/2-13 tpi bolt size Riser spacing 3-1/2 center to center Pre-drilled for internal wiring Works with early and late model stock controls and grips, most custom controls and custom grips Show chrome finish or black powder-coated Welds at risers, polished smooth End Center Pull- Style Width Rise Width back Black Chrome Retail $ WILD 1 CHUBBYS SPRINGER PULLBACK DRAG BAR 1-1/4 thick diameter Show chrome finish or black powder-coated Pre-drilled for internal wiring Works with all stock controls, cables, brake lines and wiring Mounts directly to the factory Springer front end The 6 pullback riser is 4.75 on center and features Wild 1 integrated mounting assembly with built in vibrational dampers End Center Application Width Rise Width Pullback Chrome Retail Springer $ BIKER S CHOICE NEW PART NUMBERS ARE RED

31 WILD WILD 1 CHUBBYS BARS 1-1/4 thick diameter Pre-drilled for internal wiring Knurled Works with all standard controls, grips and risers Show chrome finish or black powder-coated Will fit H-D models Throttle By Wire unless noted otherwise NOTE: Solid top clamp must be used on Touring models End Center Application Width Rise Width Pullback Black Chrome Retail Road King $ Road King II Springer Dresser Sportster/Big Twin FLST, FLSTC, FLSTF Knuckle Springer Dragster Dragster Springer Knuckle Road Glide Recommend using stock +4 throttle and idle cables on FLHR and FLHRCI models with cruise control 2 Will not fit H-D models Throttle By Wire FINAL WILD 1 PHYSCO CHUBBYS APES Perfect for extra tall riders They work with stock risers and top clamps Knurled Show chrome finish or black powder-coated 1/2-13 tpi bolt size Will fit H-D models Throttle By Wire unless noted otherwise NOTE: Solid top clamp must be used on Touring models End Center Pull- Style Width Rise Width back Black Chrome Retail 18 Ape $ Ape

32 WILD 1 FINAL WILD 1 CHUBBYS APE HANGERS 1-1/4 thick diameter Pre-drilled for internal wiring Knurled Works with all standard controls, grips and risers Show chrome finish or black powder-coated Will fit H-D models Throttle By Wire unless noted otherwise NOTE: Solid top clamp must be used on Touring models. Wiring Kits ON PAGE 676 Cables ON PAGE End Center Application Width Rise Width Pullback Black Chrome Retail 8.5 Baby Ape $ Ape Springer , Ape Ape Ape Springer , Ape Ape Ape Springer , Designed for Springer Models (FXSTS, FXSTSB & FLSTS). Mount to stock Springer risers 2 Will not fit H-D models Throttle By Wire BIKER S CHOICE NEW PART NUMBERS ARE RED

33 WILD WILD 1 CHUBBYS BEACH BARS Spectacular looking custom bars with fluid bends Great fit on FLSTC, FLSTF, FLSTS Springer and stretch/rake frame custom applications Optimum hand and wrist placement provides maximum leverage, comfort and control Works with stock risers and top clamp Springer Beach Bar mounts onto the stock Springer risers Springer Beach Bar works with stock and most custom controls, grips, risers and top clamps Show chrome-plated or black powder-coated Pre-drilled for internal wiring Will fit H-D models Throttle By Wire unless noted otherwise NOTE: Solid top clamp must be used on Touring models. End Center Pull- Style Width Rise Width back Black Chrome Retail Beach Bar $ Springer Beach Bar Will not fit 2008 H-D models Throttle By Wire WILD 1 CHUBBYS FLHT/C BAGGER BAR Custom designed to enhance rider comfort Depending on rotation when mounted more end rise and more pullback than stock handlebars Provides better ergonomic hand/wrist position for leverage and control Grips are positioned behind fairing Works with stock cables, brake line and wiring Pre-drilled for internal wiring Knurled Show chrome-plated or black powder-coated Will fit H-D models Throttle By Wire unless noted otherwise NOTE: Solid top clamp must be used on Touring models. End Center Pull- Style Width Rise Width back Black Chrome Retail FLHT, FLHTC $ FINAL WILD 1 BAGGER APE BARS Ape hangers for the FLHT/C FLHX and all other bikes with bat wing fairings Fits the electronic throttle as in the Touring models NOTE: Solid top clamp must be used on Touring models. End Center Pull- Width Rise Width back Black Chrome Retail $

34 WILD FINAL WILD 1 OUTLAW Z NARROW BASE APE HANGERS 1-1/4 thick, show chrome-plated or semi gloss black powder-coated Pre-drilled for internal wiring, polished welds and diamond knurled Works with stock risers, top clamp, controls and grips on most models Perfect for Narrow Glide and Mid Glide front ends Base is 10.5 wide from outside to outside, inside width is 8" End Pull- Style Width Rise back Black Chrome Retail 10 Ape $ Ape Ape Springer Ape Sprnger Ape Springer Ape BIKER S CHOICE NEW PART NUMBERS ARE RED

35 KHROME WERKS KHROME WERKS WIDE SWEEPER CUSTOM FOR ELECTRA GLIDE, ROAD KING AND ROAD GLIDE Similar to # and Wide Sweeper Bars, except the throttle grip end is notched and the bar is milled for internal wiring to accommodate the new electronic throttle control sensor unit on models Formed from 1 diameter, 14-gauge steel tubing, dimpled, knurled and duplex nickel chrome-plated No cable or brake hose changes normally required NOTE: +2 Sweeper on Electra Glide models requires a longer clutch cable, H-D # Twist grip sensor kit H-D# can be used with 29 and longer wires to eliminate wire splicing of the sensor unit. KHROME WERKS SWEEPER CUSTOM Highly polished and nickel chrome-plated Inspired by the Holy Banana pullback bars of the 70s, the bar sweeps back to the rider with a graceful curve 1 diameter, 14-gauge Designed for H-D models with standard low risers without electric throttle control Wide sweepers also fit Road King models Diamond-knurled to help prevent slippage and dimpled for late model controls Use all stock cable and brake hose on most models End Center Application Width Rise Width Pullback P/N Retail Standard $65.99 Wide FLHT End Center Application Width Rise Width Pullback Chrome Black Retail Standard FLHR, FLTR $79.99 Standard FLHT FLHR, FLTR FLHT KHROME WERKS TALL SWEEPER Highly polished and nickel chrome-plated 1 diameter, 14-gauge steel tubing Diamond-knurled to help prevent slippage with wire dimples Use all stock cables and brake hose on most models, FLHT models require H-D# B cable End Center Application Width Rise Width Pullback P/N Retail Heritage, Softail, Wide Glide, Road King $ FLHT Wiring Kits ON PAGE 676 Cables ON PAGE FINAL 313

36 KHROME WERKS KHROME WERKS CUSTOM T-BAR 1 diameter Risers are 3-1/2 centers 14-gauge steel tubing Available with or without dimples Chrome Application Width Rise Pullback Standard Retail Dimpled Retail 6 Riser $ $ Riser FINAL 314 KHROME WERKS 1-1/4 FAT APE HANGER Specially designed for the models with the electronic throttle control sensor unit 1-1/4 diameter formed handlebars with 1 center mounting section and 1 grip mounts Pre-drilled for internal wiring Knurled clamping width is 5.5 to accommodate 1-piece top rider clamps Works with standard controls and grips NOTE: Twist grip sensor kit H-D# can be used with 29 and longer wires to eliminate wire splicing of the sensor unit End Center Application Width Rise Width Pullback Chrome Black Retail Fits Road King, Road Glide 12 Ape Hanger $ Ape Hanger Fits Electra Glide, Street Glide 12 Ape Hanger $ Ape Hanger Fits Electra Glide, Street Glide 12 Ape Hanger $ Ape Hanger BIKER S CHOICE NEW PART NUMBERS ARE RED

37 KHROME WERKS KHROME WERKS APE HANGER 1 diameter Highly polished and nickel chrome-plated Diamond knurled 14-gauge steel tubing Extended control cables required Standard Dimpled Dimpled Application Width Rise Pullback Chrome Retail Chrome Black Retail 12 Narrow Ape Hanger $ Ape Hanger H-D Ape Hanger with Electronic Throttle Control Ape Hanger H-D Ape Hanger Springer Ape Hanger with Electronic Throttle Control Ape Hanger $ Cables ON PAGE 342 Wiring Kits ON PAGE 676 FINAL 315

38 KHROME WERKS KHROME WERKS HERITAGE STYLE Available in either 1 or in a brawny 1-1/4 diameter with 1 center mounting section and 1 grip mounts Chrome-plated or gloss black Pre-drilled for internal wiring and notched for Electrical Throttle Control on 08-up Road King and Road Glide models Knurled, clamping width is 5.5 to accommodate 1-piece top riser clamps Work with standard controls and grips. Some models may require ETC wire extensions End Center Application Width Rise Width Pullback Chrome Black Retail 1 Diameter Handlebars H-D Models $ /4 Diameter Handlebars H-D Models FINAL KHROME WERKS 1 APE HANGER BARS 1 diameter formed handlebars 12 and 14 versions available Pre-drilled for internal wiring and the electronic throttle control sensor unit; knurled for non-slip clamping Work with standard controls and grips Polished and chrome plated or gloss black Fits Electra Glide, Street Glide models with Electronic Throttle Control End Center Application Width Rise Width Pullback Black Chrome Retail 12 Ape $ Ape BIKER S CHOICE NEW PART NUMBERS ARE RED

39 KHROME WERKS KHROME WERKS CUSTOM 1 diameter Chrome 14-gauge steel tubing Diamond knurled for O.E.M. risers on 3-1/2 centers to prevent slippage Late models come with wiring dimples Standard Dimpled Dimpled Application Width Rise Pullback Chrome Retail Chrome Retail Black Retail Hi-Rise Buckhorn $52.99 Fat Boy Style $48.99 Glide Style Low Rise Drag Bar $52.99 Standard Drag Bar H-D Standard Drag Bar H-D Bad Boy Not knurled Cables ON PAGE 342 Wiring Kits ON PAGE 676 KHROME WERKS REPLACEMENT 1 diameter Chrome 14-gauge steel tubing Diamond knurled for O.E.M. risers on 3-1/2 centers to prevent slippage 82 and Later bars are dimpled for late model controls Standard Dimpled Dimpled Application Width Rise Pullback Chrome Retail Chrome Retail Black Retail Replaces H-D# Heritage (87-07 FLST) $50.99 Replaces H-D# Ape Hanger (93-05 FXDWG) $63.99 Replaces H-D# (90-00 FLSTF, N; FLH; FLHR) Replaces H-D# Pullback (82-05 XL, FX, FXR, FXST, FXDB) Replaces H-D# Pullback (88-05 FXSTS) Replaces H-D# Pullback (74-81 XL, FX) $47.95 Replaces H-D# XLX ( ; XLS; 87 FXRS; 91 FXDB-S) FINAL 317

40 BURLY BRAND BURLY BRAND NARROW BOTTOM APE HANGERS Designed for Narrow Glide H-D front ends, including all Sportster and many Dyna models. Slotted and drilled for easy internal wiring Require longer cables and extension of handlebar wiring Available in 12,14 and 16 heights and chrome or black finish Tube Diameter: 1 Center Description Width Width Rise Pullback Black Retail Chrome Retail 12 Narrow Ape $ $ Narrow Ape Narrow Ape FINAL BURLY BRAND 1-1/4 APE HANGERS Swage forming allows maximum rotation of hand controls for greater comfort and superior ergonomics. Will not interfere with Hydraulic clutch housings Slotted and drilled for easy internal wiring May require longer cables and extension of handlebar wiring Fly By Wire version designed for 2008 and newer Touring models Available in 10,14,16,18 and 20 heights 13 Bagger Bar designed for full fairing Touring bikes Tube Diameter: 1-1/4 Center Description Finish Width Width Rise Pullback P/N Retail 10 Gorilla Chrome $ Gorilla Chrome Gorilla Chrome Gorilla Black Gorilla Throttle by Wire Chrome Gorilla Chrome Gorilla Black Gorilla Throttle by Wire Chrome Gorilla Chrome Gorilla Black Gorilla Throttle by Wire Chrome Gorilla Chrome Bagger Chrome Bagger Black Bagger Throttle by Wire Chrome Bagger Throttle by Wire Black BIKER S CHOICE NEW PART NUMBERS ARE RED Cables ON PAGE 342 Wiring Kits ON PAGE 676

41 BURLY BRAND BURLY BRAND BEACH BARS Swage forming allows maximum rotation of hand controls for greater comfort and superior ergonomics. Will not interfere with Hydraulic clutch housings Slotted and drilled for easy internal wiring May require longer cables and extension of handlebar wiring Fly By Wire version designed for 08-up Touring models Center Description Width Width Rise Pullback P/N Retail 1 Diameter Bars Bikini Bar Dimpled $ Bikini Bar Not Dimpled Bikini Bar Dimpled & Drilled Beach Bar Dimpled Beach Bar Not Dimpled Beach Bar Dimpled & Drilled Longhorn Bar Dimpled /4 Diameter Bars Bikini Bar Dimpled $ Bikini Bar Throttle by Wire Beach Bar Dimpled Beach Bar Throttle by Wire Knuckle Bar Classic Bar FINAL BURLY BRAND DRAG BARS Swage forming allows maximum rotation of hand controls for greater comfort and superior ergonomics. Will not interfere with Hydraulic clutch housings Slotted and drilled for easy internal wiring May require longer cables and extension of handlebar wiring Bars are 1 diameter at the grips and clamp areas and 3.5 center to center bolt pattern to fit most H-D applications Burly Drag Bars are 1-1/4 diameter, Burly XX Drag bars style utilizes massive 1-1/2 tubing Center Description Width Width Rise Pullback P/N Retail 0 Rise Burly $ Rise Burly Rise Burly Rise Burly XX Rise Burly XX Rise Burly XX

42 BARON CUSTOM Chrome Black BARON CUSTOM BIG JOHNSON FL HANDLEBAR 1-1/4 diameter The ultimate FL handlebar s ergonomic design improves the rider s overall body position, making the bike more comfortable to ride, easier to steer Direct replacement for stock bars with 1 riser clamp diameter Works with all stock cables, lines and controls Lower grip point, relaxes shoulders for added comfort Improved bar length increases leverage making the bike easier to steer Realigned wrist position reduces or eliminates hand numbness Does not interfere with stock mirrors Diamond-knurled for O.E.M. risers on 3-1/2" centers to prevent slippage Unique, chrome or black-powdercoat finish Made in the USA End Center Application Chrome Black Width Rise Width Pullback Retail Fits FL Touring models (FLH, FLT, FLSTC), including throttle-by-wire models Drilled for late model controls, works with FL fairings $ FL using stock cable and lines on FLH, FLT, FLSTC, FLHTC and most conventional H-D models. (exc. FXCW/C, FXSTS/C, FXCF) Works with early and late model controls and all FL fairings $ Does not accept Fly-by Wire throttles FINAL 320 PAUGHCO HOLLYWOOD 1 diameter Includes exit holes instead of dimples Use with conventional risers Description Width Rise Pullback P/N Retail Black $ HANDLEBAR CLAMP PLUGS Chrome-plated Plugs fit snugly into handlebar clamp screw holes for a clean, smooth appearance Fits XL, FX, FXR $3.45 PAUGHCO BIKER S CHOICE NEW PART NUMBERS ARE RED

43 HANDLEBAR RISERS ROUND SHOULDER PULLBACK RISERS Chrome-plated Aluminum die cast Fits 1 bars Sportster and Big Twin models 4-1/ $ / / PULLBACK RISERS Chrome-plated 6061-T6 billet aluminum Fits 1 handlebars Grooved Style Top Clamp 1-piece top clamp $ RISER SETS 6061-T6 billet aluminum Beautifully chrome-plated Fits 1 handlebars Hidden screws $ Smooth Style Top Clamps $ SQUARE SHOULDER RISERS Chrome-plated and black 6061-T6 billet aluminum Can be used with any standard or custom top handlebar clamps Fits 1 diameter handlebars Description Black Retail Chrome Retail $ $ / / / / Mounting Kits ON PAGE DETONATOR 2 RISERS 1-3/8 diameter risers Risers have hidden holes to thread wire down the center of each riser and comes complete with a base mount chrome billet wire cover so that all wires are totally hidden All assembly screws are also hidden with top cap Hidden wire cover available separately for other applications Available in 4, 6 and 8 Fits 1 diameter handlebars $ FINAL 321

44 HANDLEBAR RISERS FINAL 322 SPRINGER RISERS 2 Chrome Smooth Top Risers $ Chrome Smooth Top Risers Chrome Smooth Top Risers ALUMINUM RISERS Chrome-plated Forged aluminum Hidden screws for clean look Fits 1 diameter handlebars $ PULLBACK RISERS Chrome-plated and forged aluminum O.E.M. type pullback risers 4-1/2 rise, 1 setback Use stock or aftermarket clamp 1/2 x 13 mounting thread H-D# $49.95 STRAIGHT RISERS Chrome-plated and forged aluminum O.E.M. type straight risers 4-1/2 rise Use 1/2 x 13 coarse thread mounting bolts Use stock or aftermarket clamp H-D# $44.95 DOMED PULLBACK RISERS Chrome-plated Forged aluminum 3 up, 3 back Fits Sportster, Big Twin H-D# T $ FAT RISERS 1-1/4 thick Polished and chromed finished Works with 1 standard bars Sportster, Big Twin Models 1.5 High $ High with Top Clamp - Black Pullback Mounting Kits ON PAGE 324 LA CHOPPERS RISER EXTENSION Use with most bars and risers to clear tanks and gauges CNC machined high strength steel Chrome-plated or gloss black powder-coated finish DEUCE PULLBACK RISERS Chrome-plated 6 rise Includes 2 risers, 2 clamps and 4 screws Fits 1 bars, Deuce models $69.99 PAUGHCO GLIDE RISERS Fits Sportster, Big Twin models 3 Rise $ Rise Rise Rise Mounting Hardware 1/2-20 x 1-1/2 Studs $ /2-20 x 2 Bolts Description Chrome Black Retail 1 Diameter Risers 1 Height $ /2 Height /4 Diameter Risers 1 Height $ /2 Height BIKER S CHOICE NEW PART NUMBERS ARE RED SHORT RISERS Chrome-plated O.E.M. type replacements Use stock or aftermarket clamp FL Style FL H-D# $23.95 FX Style 1-5/8 rise XL; XLS; FX (exc. FXWG) H-D# $ NOVELLO CUSTOM RISER EXTENSIONS Use with most bars and gauges to clear tanks and gauges CNC machined billet aluminum Chrome-plated or black finish Description Chrome Black Retail 1 Handlebars 1 Rise $ /2 Rise /2 Handlebars 1 Rise $ /2 Rise

45 HANDLEBAR RISERS Smooth Drilled Mohawk LA CHOPPERS HANDLEBAR RISERS Cateye-shaped riser caps with radius edges provide cool, clean style No visible hardware for a super custom look Kit includes risers, caps and cap mounting hardware Available for 1 or 1-1/4 diameter handlebars Available in 3 distinct cap styles: drilled, mohawk and smooth Available in 2 heights: 1-1/2, 5-1/2 (w/ 1.75" pullback) Mount hole tapped 1/2 x 13 for use with H-D stock riser bolts Available in hand polished chrome or black T-6061 billet aluminum 1-1/4 for use wit LA Choppers Hefty handlebars Style Bar Size Rise Cap Chrome Black Retail Straight Smooth $ Straight Hefty 1-1/4 1.5 Smooth Pullback Smooth Pullback Hefty 1-1/4 5.5 Smooth Straight Drilled Straight Hefty 1-1/4 1.5 Drilled Pullback Drilled Pullback Hefty 1-1/ Drilled Straight Mohawk Straight Hefty 1-1/4 1.5 Mohawk Pullback Mohawk Pullback Hefty 1-1/4 5.5 Mohawk LA CHOPPERS TRIPLE TREE RISER ANGLE ADAPTERS Change the angle of your risers without having to install a different rake triple tree By angling your risers towards you, it provides extra pullback often providing a more comfortable riding position Tilt your risers away from you to get a custom chopper look and feel at a fraction of the price of raking your front end or installing new handlebars Angle is 5 and can be installed tilting risers towards or away from you T-6061 billet aluminum $89.95 LA CHOPPERS 1-1/4 HEFTY SPRINGER HANDLEBAR RISER KITS Adapt your Springer to work with LA Choppers line of Hefty Handlebars Kit comes complete with 2 risers, 2 mounting caps and all mounting hardware for the caps to the risers and the risers to your triple tree Hardware is completely concealed for a smooth clean look Hand polished and bathed in bright chrome T-6061 billet aluminum $ LA CHOPPERS TOURING HEFTY RISERS FOR 1-1/4 Raw finish Includes all hardware Fits under the stock nacelle cover to accommodate all of LA Choppers Hefty Handlebars Fits Touring models $ FINAL 323

46 HANDLEBAR RISERS & CLAMPS FINAL High High 4.5 High WILD 1 CHUBBYS RISERS 1-1/4 thick diameter Show chrome finish Works with 1 standard bars Use stock or aftermarket handlebar clamp Tapped for 1/2 x 13 mounting bolts Fits Sportster and Big Twin models High 5.5 High Pullback 9.5 High Pullback Application Black Chrome Retail 1.5 High $ High High High Pullback High High Pullback WILD 1 HANDLEBAR CLAMPS Show chrome finish Fits all H-D with 1 or 1-1/4 bars Description Black Chrome Retail Smooth $59.95 Ball-Milled WILD 1 TOP CLAMP 1-piece top clamp for Deuce and Softail Deluxe style risers Covers the 1 diameter center section of the Chubby bars Precisioned machined from billet aluminum with a show chrome finish Fits stock Deuce, Softail Deluxe and same style aftermarket risers, all 1 handlebars and Wild 1 Chubby bars $ GARDNER-WESTCOTT HANDLEBAR RISER MOUNTING KITS with lock washers Stainless Application Steel Retail Chrome Retail Allen Head 1/2-13 x 2-1/ $ $ /2-13 x 2-3/ /2-13 x /2-20 x 2-1/ /2-20 x 2-3/ /2-20 x Hex Head 1/2-13 x 2-1/ $8.99 1/2-13 x 2-3/ /2-13 x /2-20 x 2-1/ /2-20 x 2-3/ /2-20 x WILD 1 DEUCE HANDLEBAR ADAPTER KIT Custom inserts fit top triple tree Modifies the Deuce front end to accept Wild 1 Chubby bars Precision machined from steel Show quality chrome-plated $34.95 WILD 1 CUSTOM HANDLEBAR CLAMPS Hidden hardware Precision machined from billet aluminum Chrome-plated Works with Wild 1 Chubby bars and risers, standard 1 bars, stock and stock risers Fits all H-D with 1 or 1-1/4 bars Smooth $96.95 Ball-Milled BIKER S CHOICE NEW PART NUMBERS ARE RED

47 HANDLEBAR CLAMPS HANDLEBAR TOP CLAMPS Chrome or black Aluminum Includes 4 chrome bolt head plugs Fits H-D models (exc. Springers) Black (Smooth) $19.95 Chrome (Finned) GARDNER-WESTCOTT HANDLEBAR CLAMP CUSTOM HARDWARE KITS Chrome-plated Allen-head XL, FX $ XL, FXR (Speedo Bracket) XL, FX (exc Custom) SCALLOPED HANDLEBAR CLAMP Chrome-plated Fits XL, XFX, FXR models (exc. FXLR) Without Skirt $21.50 With Skirt EARLY STYLE RISER CLAMPS Chrome-plated, billet aluminum Fits all O.E.M. clamps on all early style risers from H-D models Grooved $37.95 Smooth HANDLEBAR CLAMP COVER Chrome-plated Reproduction of O.E.M. cover Fits FL models (without steering damper) H-D# $ UPPER CLAMPS Chrome Clamps have countersunk holes for allen screws Fits XL, FX, FXR (except FXLR) Note: may be used on 77-up FL, FX if speedometer and tachometer are mounted independently Without Skirt H-D# T $15.95 With Skirt H-D# T With Winged Emblem FINAL 325

48 HANDLEBAR BUSHINGS FLUSH MOUNT HANDLEBAR BUSHING KIT Black and chrome handlebar bushing kit Fits all H-D models (exc. Springer; XL, FLH, FLT) with 3.5 riser centers when 1/2-13 thread risers are used $36.95 HANDLEBAR MOUNT BUSHINGS Exact duplicates of O.E.M. High durometer insulating rubber bonded to steel inner and outer sleeves Fits K, XL; FL, FX H-D# $13.95 ARLEN NESS POLYURETHANE HANDLEBAR DAMPER KIT These polyurethane bushings add a more positive feel to the handlebars while limiting vibrations especially when using tall handlebars Heavy-duty chrome cup washers will not bend or distort like factory units Kit includes polyurethane bushings, inner sleeves and heavy-duty chrome cup washers Fits Softail, FX, FXR, Dyna, XL models (exc XL, Springer, Deuce) Custom Applications $30.95 HANDLEBAR MOUNT REBUILD KIT Kit includes rubber bushings, spacers and chrome washers Fits XL; Big Twin H-D# $10.95 ARLEN NESS POLYURETHANE HANDLEBAR DAMPER KIT FOR BAGGER MODELS A must when installing ape hanger handlebars on a Bagger Polyurethane bushings add a more positive feel to the handlebars while limiting vibrations Heavy-duty chrome cup washers will not bend or distort like factory units Kit includes polyurethane bushings, inner sleeves and heavy-duty chrome cup washers Fits FLT, FLH models $29.95 FINAL 326 BARNETT SOLID MOUNT HANDLEBAR ADAPTERS Eliminate rubber mounted handlebars Fitted to fork crown Solid mount adapter kit - all years Sold in a set of 4 Note: This kit fits H-D# A steel black or chrome and H-D# aluminum fork crowns $11.40 URETHANE HANDLEBAR BUSHINGS Special polyurethane material eliminates spongy feeling of O.E.M. type rubber bushings while better absorbing vibration Includes 4 chrome washers Note: Does not fit FLH, FLHT, FLHTC, FLHS, FLHTCU XL; Big Twin (exc. FXDB, FXSTD, Springer) $20.95 With Coarse Thread Bolts Includes two 1/2-13 x 2-1/2 chrome allen bolts XL; Big Twin (exc. FXDB, FXSTD, Springer) $27.95 With Fine Thread Bolts Includes two 1/2-20 x 2-1/2 chrome allen bolts XL; Big Twin (exc. FXDB, FXSTD, Springer) $27.95 Washers Only Sportster, Big Twin $ ARLEN NESS FLUSH MOUNT POLYURETHANE HANDLEBAR BUSHING KITS Cleanest way to mount your handlebars on your stock or custom triple tree application Cup washers provided in this kit are machined from 303 stainless steel and polished to chrome-like finish Flush mount lower cup washer conceals the provided hardware for a superior look USA made polyurethane bushings eliminate flexing and isolate vibration Kits include 2 lower flush mount cup washers, 2 heavy-duty wall top cup washers, 4 custom polyurethane bushings, 2 inner sleeves and fine or coarse allen hardware Fits Softail, FX, FXR, Dyna, XL models (exc XL, Springer, Deuce) Custom Applications Fine Thread $49.95 Coarse Thread BIKER S CHOICE NEW PART NUMBERS ARE RED

49 HANDLEBAR HANDLEBAR COIN HOLDER Chrome-plated die cast aluminum coin holder Holds nickels, dimes and quarters as well as bills in a rear clip Entire holder detaches from handlebar clamp for storage in saddlebag or safe keeping Great for traveling on tollways Fits 7/8 and 1 handlebars H-D # T $22.50 BUGLE HORN Chrome Manually operated bugle horn Mounts to 7/8 or 1 diameter handlebars $8.95 SLIPSTREAMER RADAR DETECTOR MOUNT Strong 3/16 thick acrylic mounting plate with quick release EPDM tiedown strap Allows mounting of standard radar detector on 7/8 or 1 handlebars $36.95 KURYAKYN SNAP-N-GO DRINK HOLDER These affordable drink holders mount on either the clutch or brake perch mounts or a 1 bar With secure snap-on mounting, simply Snap-N-Go to install or remove When removed it leaves an unobtrusive stud on your perch or a small clamp and stud for universal bar application Select the drink holder style you desire and ride with the plush comforts you deserve Includes 1 bar mount and perch mount Fits All H-D models Snap-N-Go with Stainless Steel Mug (Mfg/N 1486) $39.99 Snap-N-Go with Universal Basket (Mfg/N 1487) ROADRUNNER DRINK HOLDER WITH STAINLESS STEEL CUP 3-piece kit that mounts to your handlebar 16-oz. tapered cup is 100% stainless steel, insulated to keep your favorite beverage hot or cold and spill proof Detachable components make storage quick and effortless when not in use Mounts left or right side 1 handlebars $ /4 handlebars BIKE-BUOY MUG Always steady insulated drink holder Holds cans, bottles, glasses, plus coffee mugs with handles Includes handlebar mounting clamp and fairing mounting clip Sold individually $19.95 FINAL 327

50 HANDLEBAR KRUZER KADDY Attaches to any 1 or 1-1/4 bar Reversible mounting stud allows for rigid or pivot positioning 4 different styles to compliment any bike and budget Chrome is triple-plated Cup comes with 2 insulated liners to accommodate many sizes of drink bottles and cups Easily detachable cup Stainless $40.00 Chrome Black Leather Wrap KRUZER KADDY TRAVEL CUP Holds 20 oz Keeps beverages hot for 2 to 3 hours Keeps beverages cold for 5 hours Leak Proof Opens and closes at the push of a button $25.00 KRUZER KADDY COMBO PACKAGE Includes 1 Chrome Kruzer Kaddy ( ) and 1 Kruzer Kaddy Travel Cup ( ) $70.00 KRUZER KADDY KUSTOM KADDY Reversible mounting system allows for a rigid or pivot position Available in triple chrome plated or leather wrap Allows for optimum tank clearance Includes metric and American standard bolts Cup comes with 2 insulated liners to accommodate many sizes of drink bottles and cups Easily detachable cup Fits into the brake or clutch perch and highly recommended for models equipped with the 6 gallon fuel tank Chrome $45.00 Leather Wrap FINAL 328 KURYAKYN UNIVERSAL HANDLEBAR ACCESSORY MOUNTS Attach your cell phone, MP3 player and almost any portable device directly to your handlebars Quick detach mounting plate leaves a simple clamp when it is not in use Standard 4-hole AMPS pattern Includes hook-and-loop straps Accepts most belt clips 1" Handlebars (Mfg/N 1421) $ /4" Handlebars (Mfg/N 1474) CYCLE SOUNDS DEVICE HOLDERS First Generation iphone/3g/4g iphone/ipod Touch Holders With this holder there is no need for Velcro as it holds your iphone in place while riding Will need bracket P/N (bracket is included with all Cycle Sounds Audio Kits) to mount this holder to the switch housing which bolts onto the bike to secure the holder Blackberry Bold & Storm Holders Has quick release design that allows for easy removal Attaches to amps hole pattern on the universal mp3 mount that comes in all our kits Hardware and slide lock adaptor included iphone 1st Generation Holder $29.95 iphone 3G Holder iphone 4G Holder ipod Touch Holder Blackberry Bold Holder Blackberry Storm Holder iphone/ipod Touch Holder Bracker Required if purchasing iphone/itouch holders separately from Audio Kits BIKER S CHOICE NEW PART NUMBERS ARE RED

51 RAM MOUNTS Utilizes a patented rubber ball and socket design which isolates and dampens shock and vibration Allows you to mount just about anything, anywhere on your motorcycle, ATV or UTV RAM is made of marine grade aluminum with a powder-coated finish, stainless steel hardware and Nitrile rubber balls Lifetime manufacturer s warranty Visit for more product information 3 ways to order RAM Mounts 1. Complete Kit 2. Mount + Cradle 3. Attachment Base + Arm + Adaptor Base + Cradle 1. Complete Kits RAM MOUNTS 2. Mount & Cradle 3. Attachment Base, Arm, Adapter Base & Cradle Complete Kits Diamond Base Kits Round Base Kits Camera Mounts Cradles Universal Cradle Aqua Boxes Attachment Bases FINAL Adaptor Bases (Chrome Available) Arms Accessories (Chrome Available) (Chrome Available)

52 RAM MOUNTS FINAL 330 Compatible Special Complete Kits Mount/Base Product Description Mfg/N P/N Retail Includes mounting base, standard length double socket arm and Diamond base to attach to a RAM cradle Note: Does not include device cradle or accessory. Drink Cup Holder with U-Bolt Base Complete RAM-B-132R $40.95 Cup Holder with U-Bolt Base Complete RAM-B Moto Mount X-Grip, Brake/Master Cylinder Base Complete Universal Device Holder RAM-B-174-UN Moto Mount X-Grip, Stem Mount 2.47 x 1 Complete Universal Device Holder. Installs into the majority RAM-B-176-UN of open stem holes on the triple clamp Moto Mount X-Grip, Brake/Master Cylinder and Complete Universal Device Holder. Mounts to brake/master RAM-B-174-UN U-Bolt Base cylinder or handlebar between 3/4 to 1-1/4 with u-bolt Cradle Diamond Base Kits Attachment Controls Mount 2.47 x 1 (Chrome) Diamond Adapts to most brake or clutch RAM-B-174CH $ reservoir assemblies. Controls Mount 2.47 x 1 Diamond Adapts to most brake or clutch RAM-B reservoir assemblies. U-Bolt Mount 2.43 x 1.31 Diamond Fits any round tube or handle bar RAM-B-149Z between 3/4" to 1-1/4" U-Bolt Mount (Chrome) Diamond Fits any round tube or handle bar RAM-B-149CH between 3/4" to 1-1/4" Stem Mount 2.47 x 1 Diamond Installs into the majority of open stem RAM-B holes on the triple clamp. Compatible Round Base Kits Mount/Base Clutch, Brake, U-Bolt Combo with 202 Base Round RAM-B $37.95 Chrome Clutch, Brake Round RAM-B-174CH U-Bolt Combo Handlebar Kit U-Bolt Mount with 202 Base Round RAM-B-149Z Compatible Camera Mount Bases/Kits Mount/Base Rail Mount for Dia. Rails Complete U-bolt for rails, 1/4-20 stud included RAM-B-149Z-C $37.95 U-bolt or Master Cylinder Mount Complete Mount to clutch/brake master cylinder reservoir RAM-B A or rail between diameter, 1/4-20 stud included ATV/UTV Rail Mount Complete Rail/rollbar strap mount, 1/4-20 stud included RAM-B-149Z-2-202A /2 Dia. Round Base with Stud Any camera with Camera mount. Adapts to any female 1/4-20 RAM-B-202A /4-20 female thread threaded hole. 2-1/2 wide base 1 Ball with 1/4-20 Aluminum Stud Any camera with Camera mount. Adapts to any female 1/4-20 RAM-B /4-20 female thread threaded hole. 1-1/4 Dia. Round Base with Stud Any camera with Camera mount. Adapts to any female 1/4-20 RAP-B /4-20 female thread threaded hole. 1-1/4 wide base 1 Requires the Go Pro Tri-pod mount ( ) for use with Go Pro Camera Compatible Phone/MP3 Cradles Mount/Base Apple iphone Diamond RAM-HOL-AP $10.95 Apple ipod Touch Diamond RAM-HOL-AP Apple Nano 3rd Gen Diamond RAM-HOL-AP Apple iphone 3G Diamond RAM-HOL-AP Apple ipod Touch 2nd Gen Diamond RAM-HOL-AP Apple iphone 4 Diamond RAM-HOL-AP Compatible GPS Cradles Mount/Base Garmin 60 Series Diamond Astro 220, 60, 60C, 60CS, 60CSx, 60Cx RAM-HOL-GA $10.95 Garmin Colorado Series Diamond 300, 400c, 400i, 400t RAM-HOL-GA Garmin Dakota Series Diamond 10, 20 RAM-HOL-GA Garmin Etrex Color Diamond Legend C, Cx, Venture Cx, Vista C, Cx, HCx RAM-HOL-GA Garmin GPS Map 62 Series Diamond GPS Map 62, 62S, 62ST RAM-HOL-GA Garmin GPS Map 76C Diamond 76C, 76CS, 76CSx, 76Cx, 96, 96C RAM-HOL-GA Garmin Nuvi Diamond 300, 310, 350, 360, 370 RAM-HOL-GA Garmin Nuvi 200/250 Diamond 200, 205, 250, 255, 260, 270 RAM-HOL-GA Garmin Nuvi 200W/250W Diamond 200w, 205w, 250w, 255w, 260w, 265wt RAM-HOL-GA Garmin Nuvi 500/550 Diamond 220, 500, 510, 550, Zuno 220 RAM-HOL-GA Garmin Nuvi 660 Diamond 600, 610, 650, 660, 670, 680 RAM-HOL-GA Garmin Nuvi 750/760/770 Diamond 710, 750, 755T, 760, 765T, 770, 775T, 780, 785T RAM-HOL-GA BIKER S CHOICE NEW PART NUMBERS ARE RED

53 RAM MOUNTS Compatible Special GPS Cradles Cont. Mount/Base Product Description Mfg/N P/N Retail Garmin Nuvi Diamond 800, 850, 855, 860, 880, 885T RAM-HOL-GA $16.95 Garmin Nuvi 1200 Diamond 1200, 1250, 1260T RAM-HOL-GA Garmin Nuvi 1300 Diamond 1300, 1350, 1350T, 1370T, 1390T RAM-HOL-GA Garmin Nuvi 1490T Diamond 1440, 1450, 1490T RAM-HOL-GA Garmin Nuvi 5000 Diamond Includes set of 2 nuts & bolts to connect cradle RAM-HOL-GA to any RAM compatible mount Garmin Approach/Oregon Diamond Approach G5, RAM-HOL-GA Oregon 200, 300, 400c, 400i, 400t, 550t, 550 Garmin Rino 530/520 Diamond 520, 520HCx, 530, 530HCx RAM-HOL-GA Garmin 3700 Series Diamond 3750, 3760T, 3790T RAM-HOL-GA Garmin GPSMAP 78 Diamond 78, 78s, 78sc RAM-HOL-GA Garmin Nuvi 1690/1695 Diamond 1690 RAM-HOL-GA TomTom ONE 130 Diamond 125, 130, 130S RAM-HOL-TO TomTom GO 510/710/910 Diamond 510, 710, 910 RAM-HOL-TO TomTom ONE V2/V3 Diamond One, V2, V3 RAM-HOL-TO TomTom ONE XL Diamond XL, XLS RAM-HOL-TO TomTom GO Diamond 520, 520T, 720, 720T, 730, 920, 920T RAM-HOL-TO TomTom GO 740 LIVE Diamond RAM-HOL-T TomTom XL Diamond 325, 325S, 325SE, 330, 330S, 335S, 340, RAM-HOL-T S, 340S LIVE Magellan Triton Diamond 200, 300, 400, 500 RAM-HOL-MA Magellan Triton 1500/2000 Diamond Mobile Mapper 6 RAM-HOL-MA Magellan 3200/3210/3220/3225/3250 Diamond 3200, 3210, 3220, 3225, 3250 RAM-HOL-MA Magellan 4200/4210/4220/4250 Diamond 4200, 4210, 4220, 4256 RAM-HOL-MA Magellan Explorist 510 Diamond Magellan Explorist 510, 610, 710 RAM-HOL-MA Spot II Diamond RAM-HOL-SP Compatible Universal Cradles Mount/Base Universal Plastic Cradle Diamond RAM-HOL-UN $22.95 Compatible Aqua Boxes Mount/Base Medium Size Aqua Box Round Width 2.88, Height 5.75, Depth 1.18 RAM-HOL-AQ $36.95 Small Size Aqua Box Round Width 2.38, Height 4.63, Depth 1.13 RAM-HOL-AQ Medium Square Size Aqua Box Round Width 6, Height 4, Depth 1.75 RAM-HOL-AQ Attachment Bases Cradle Attachment Cycle Handlebar Base with 1 Ball Adapts to most brake or clutch RAM-B $13.95 reservoir assemblies. Cycle Handlebar Base with 1 Ball (Chrome) - Adapts to most brake or clutch RAM-B-309-1CH reservoir assemblies. Clutch, Brake, U-Bolt Combo Handlebar Kit Adapts to most brake or clutch RAM-B reservoir assemblies. With U-Bolt Cycle Handlebar Base with 2 Balls - Adapts to most brake or clutch RAM-B reservoir assemblies. With extra ball. Cycle Stem Base with 1" Diameter Ball - Installs into the majority of open stem holes RAM-B on the triple clamp. Reservoir Cover Side Ball - Universal reservoir cap adapter. RAM-B Base with M10 X 1.25 Pitch & 1" Ball - M10 adapter ball. RAM-B Rail Base with Ball & Zinc U-Bolt - Fits any round tube or handle bar RAM-B-231Z between 3/4" to 1-1/4" U-Bolt for 3/4" TO 1" Diameter (Chrome) - Fits any round tube or handle bar RAM-B-231CH between 3/4" to 1-1/4".87 X 2.25 with 11mm Hole & 1" Ball - 11mm bolt adapter. RAM-B Base with 9mm Hole and 1" Ball - 9mm bolt adapter. With angle RAM-B Adaptor Bases 2-7/16" X 1-5/16" Base with Ball Diamond Diamond base adapter RAM-B $ /16" Diameter Base with 1" Ball Round Round base adapter RAM-B Arms Double Socket Arm Short 2" RAM-B-201-A $12.95 Double Socket Arm Short 2 (Chrome) RAM-B-201ACH Double Socket Arm Medium 3" RAM-B Double Socket Arm Medium 3 (Chrome) RAM-B-201CH Double Socket Arm Long 6" RAM-B-201-C Accessories Knob with Keyed Lock & 1/4"-20 Brass Hole - Locking Knob RAM-KNOB3L $23.95 Big Screen GPS Magnifier 2 X 4 2X - GPS Magnifier compatible with any RAM-MAG RAM GPS cradle FINAL 331

54 MIRRORS MIRRORS FOR TOURING MODELS Direct replacement on FLHX and easily fitted to FLHT, FLHTC/U models Mounts inside the inner fairing on FLHT, FLHTC, FLHTCU models Description Mirror Chrome Retail Black Retail Oval (pr) 5" L x 2.75" H $ $45.50 Spear (pr) 6" L x 1.75" H Custom Touring (pr) 1" wider than O.E.M Chopped Stem Height FINAL 332 TURN SIGNAL MIRRORS # / features auxiliary dual filament turn signals on back. Comes with amber lens # backside amber L.E.D. marker light Stem height = bottom of the mount to the center of the stem mount on mirror Stem Description Mirror Height* Chrome Retail Detonator L.E.D. Turn Signal (pr) Backside amber L.E.D. 6" x 3.5" 6" $ Oval L.E.D. Left (ea) 5" x 2.5" 4.5" Oval L.E.D. Right (ea) 5" x 2.5" 4.5" XTR-2 L.E.D. Marker Light (pr) 5" x 4" x 2.5" 4" Stem Height O.E.M. MIRRORS 5 X 3.5 mirror Stem height = bottom of the mount to the center of the stem mount on mirror Stem Description Height* Chrome Retail 1-Piece Long Stem Right H-D# T (ea) 6" $ Piece Long Stem Left H-D# T (ea) 6" Piece Short Stem Right H-D# (ea) 4" Piece Short Stem Left H-D# (ea) 4" O.E.M. Style Stamped Steel Std H-D# T 5" O.E.M. Style Die-Cast Heavy-Duty H-D# TB 5" BIKER S CHOICE NEW PART NUMBERS ARE RED

55 MIRRORS Applications ON PAGE FINAL

56 MIRRORS FINAL Applications ON PAGE BIKER S CHOICE NEW PART NUMBERS ARE RED

57 MIRRORS MIRRORS Fits H-D models Stem height = bottom of the mount to the center of the stem mount on mirror Description Mirror Stem Height* Chrome Retail Black Retail XTR-2 (pr) 5" x 4" x 2.5" 4.5" $75.95 Dragster Left (ea) D.O.T. approved mirror glass 6.5" x 3.25" 3.5" Dragster Right (ea) D.O.T. approved mirror glass 6.5" x 3.25" 3.5" Warrior with Tribal Stem Right (ea) 4.25" x 2" 4" Warrior with Tribal Stem Left (ea) 4.25" x 2" 4" Warrior with Slotted Stem Right (ea) 4.25" x 2" 4" Warrior with Slotted Stem Left (ea) 4.25" x 2" 4" Scorpion Right (ea) 6" x 2" 4" & 3" Scorpion Left (ea) 6" x 2" 4" & 3" Chopped (pr) 5.5" x 3" 4" Twister Square (pr) 4.5" x 2.25" 4" Twister Teardrop (pr) 6" x 2" 5" Formula (pr) 6" x 3" 5" Round Right (ea) 4" 4" Round Left (ea) 4" 4" $24.95 Slotted Oval-Grooved with Sword Stem (pr) 5.25" x 2.5" 4" Slotted Rectangular with Blade Stem (pr) 4.5 x Oval with Slotted Stem (pr) 5.5" x 3.5" 6.5" Small Teardrop Smooth Backing (pr) 4.5" x 1.5" 4" & 3" Custom Style Teardrop (pr) 6.25" x 3.25" 4.5" Custom Style Oval (pr) 5.5" x 3.25" 5" Sweeping Teardrop Left (ea) 5" x 3" 5" Sweeping Teardrop Right (ea) 5" x 3" 5" Adjustable Smooth Left (ea) 3.75" x 1.5" 4.5" Adjustable Smooth Right (ea) 3.75" x 1.5" 4.5" Adjustable Slotted Left (ea) 3.75" x 1.5" 4.5" Adjustable Slotted Right (ea) 3.75" x 1.5" 4.5" Custom Rectangular Stamped Steel (ea) Bi-directional mount 4.5" x 2" 4" Custom Rectangular Die Cast (ea) Bi-directional mount 4.5" x 2" 4" Teardrop Flame (pr) 5.25 x Oval (ea) Bi-directional mount 4.25" x 2.25" 4" Maltese (ea) Bi-directional mount 2.5" x 2.5" 4" & 3" , Slimline Custom (ea) Bi-directional mount 5" x 3" 3" " Rotor with Round Stem (ea) Bi-directional mount 3.5" x 3.5" 4" & 3" " Rotor with Cross Stem (ea) Bi-directional mount 3.5" x 3.5" 4" & 3" Maltese Cross with Flame Stem (ea) Bi-directional mount 4" x 4" 4" Maltese Cross with Cross Stem (ea) Bi-directional mount 4" x 4" 4" Rounded Diamond Left (ea) 5.25" x 2" 4" & 3" Rounded Diamond Right (ea) 5.25" x 2" 4" & 3" Large Teardrop (pr) 5.5" x 2" 4" & 3" Diamond with Flame Stem (ea) Bi-directional mount 5" x 2.75" 4" Diamond with Spear Stem (ea) Bi-directional mount 5" x 2.75" 4.5" Oval Girder Curved Stem (ea) Bi-directional mount 3.5" x 2" 4" & 3" Oval Girder Cross Stem (ea) Bi-directional mount 3.5" x 2" 4" & 3" Custom Bolt-On (ea) 3" 4" Oval w/teardrop (pr) Spear stem 5.5 x Oval w/teardrop (pr) Short slot stem 5.5 x Kruzer Right (ea) 4" x 2.25" 5" Wide View Rectangle (ea) 5" x 2" 4.5" Facet Diamond (ea) Bi-directional mount 6" x 3.5" 4.5" , Smooth Diamond (ea) Bi-directional mount 5" x 3.5" 4" , Black mirror head with chrome flames and stem 2 Includes hardware for Harley-Davidson or metric applications 3 Bi-directional mount fits either left or right side 4 Includes additional 3" stem Stem Height 5 Includes 2 stems: 5" and 3-3/4" 6 For 96-Up applications, use mirror adapter # Includes 2 stems: 4-7/8" and 3-5/8" FINAL 335

58 WICKED IMAGE & ARLEN NESS MIRRORS WICKED IMAGE FAST LANE TOURING MIRRORS Billet aluminum Replaces plastic fairing mirror on FL models Designed to come out further than stock replacement Includes mounting hardware $ ARLEN NESS DIE-CAST BAGGER MIRRORS Small stylish designs for FLHX models Black powder-coated, die-cast construction Integrated design cleans up the look of the stock Bagger Direct replacement on FLHX and easily fit on other Bagger models with fairing Mini Oval $89.95 RAD II WICKED IMAGE TOURING MIRRORS Billet aluminum Replaces plastic fairing mirror on FL models Features a 2 blind spot mirror for safety Includes mounting hardware Chrome $ Black FINAL ARLEN NESS RAD III MIRRORS Small stylish designs for your custom application Chrome-plated die-cast construction All styles feature convex glass Available in black and chrome Sold individually Note: Stem Height is measured from the bottom of the stem to the center of the mirror head mounting. Stem Offset is measured from the center of the stem mounting to the center of the mirror head mounting. Glass Stem Stem Description Dimensions Height Offset Chrome Retail Black Retail RAD III Die-Cast Stem, Left 7" W x 3" H 2-3/4" 3-1/2" $ $69.95 RAD III Die-Cast Stem, Right 7" W x 3" H 2-3/4" 3-1/2" RAD III Teardrop, Steel Stem, Left 7" W x 3" H 3-3/4" 3-1/4" RAD III Teardrop, Steel Stem, Right 7" W x 3" H 3-3/4" 3-1/4" BIKER S CHOICE NEW PART NUMBERS ARE RED

59 ARLEN NESS MIRRORS ARLEN NESS MICRO MIRRORS Small stylish designs for your custom application Chrome-plated die-cast construction All styles feature convex glass Available in black and chrome Sold individually Note: Stem Height is measured from the bottom of the stem to the center of the mirror head mounting. Stem Offset is measured from the center of the stem mounting to the center of the mirror head mounting Glass Stem Stem Description Dimensions Height Offset Chrome Retail Black Retail 4-Point, Left 3-3/4" W x 1-1/4" H 2-1/2" 3-1/2" $ $ Point, Right 3-3/4" W x 1-1/4" H 2-1/2" 3-1/2" Flame, Left 3-3/4" W x 1-1/4" H 3-1/2" 4" Flame, Right 3-3/4" W x 1-1/4" H 3-1/2" 4" Mini Oval, Left 4-1/2" W x 1-1/2" H 2-1/2" 3-1/2" Mini Oval, Right 4-1/2" W x 1-1/2" H 2-1/2" 3-1/2" RAD II Teardrop, Left 4-1/2" W x 1-1/2" H 2-1/2" 3-1/2" RAD II Teardrop, Right 4-1/2" W x 1-1/2" H 2-1/2" 3-1/2" Scoop Triangle, Left 4-1/2" W x 1-1/2" H 2-1/2" 3-1/2" Scoop Triangle, Right 4-1/2" W x 1-1/2" H 2-1/2" 3-1/2" Upswept, Left 4-1/2" W x 1-1/2" H 2-1/2" 3-1/2" Upswept, Right 4-1/2" W x 1-1/2" H 2-1/2" 3-1/2" FINAL 337

60 ARLEN NESS MIRRORS FINAL ARLEN NESS DIE-CAST MIRRORS Stylish designs for your custom application Chrome-plated die-cast construction All styles feature convex glass Includes hardware for Harely-Davidson or metric applications Note: Unless otherwise noted, all mirrors are sold individually. Stem Height is measured from the bottom of the stem to the center of the mirror head mounting. Stem Offset is measured from the center of the stem mounting to the center of the mirror head mounting. Glass Stem Stem Description Dimensions Height Offset P/N Retail Cross with Die-Cast Stem 3" W x 3" H 4-1/8" 4" $34.95 Pocket Turbo, Left 4-1/2" W x 2" H 4-1/4" 4-1/4" Pocket Turbo, Right 4-1/2" W x 2" H 4-1/4" 4-1/4" Pocket-Turbo, Grooved, Left 4-1/2" W x 2" H 4-1/4" 4-1/4" Pocket-Turbo, Grooved, Right 4-1/2" W x 2" H 4-1/4" 4-1/4" D Cateye, Left 4-1/4" W x 2-1/8" H 4-7/8" 3" D Cateye, Right 4-1/4" W x 2-1/8" H 4-7/8" 3" Cat-Eye, Soft Bend Grooved 4-1/4" W x 2-1/4" H 4" 4-1/2" Cat-Eye, Soft Bend Smooth 4-1/4" W x 2-1/4" H 4" 4-1/2" Vision 4-1/4" W x 2-1/8" H 4-1/4" 4-1/4" Stealth Long-Stem 5" W x 2-1/2" H 3-1/2" 4" Stealth Short-Stem 5" W x 2-1/2" H 3-1/2" 4" Oval Stepped 5" W x 2-1/2" H 4-1/4" 4-1/4" Sling-Shot, Smooth 4-3/4" W x 2" H 4-1/4" 4-1/4" Sling-Shot, Grooved 4-3/4" W x 2" H 4-1/4" 4-1/4" Teardrop, Left 4-1/4" W x 2-1/8" H 4" 3-3/4" Teardrop, Right 4-1/4" W x 2-1/8" H 4" 3-3/4" Bi-directional mount BIKER S CHOICE NEW PART NUMBERS ARE RED

61 KURYAKYN MIRRORS KURYAKYN MAGNUM PLUS MIRRORS Magnum Plus Mirrors position the mirror head outward 2 farther than standard Magnum mirrors Flat glass, allows for a larger image Mounting hardware for a variety of H-D applications is included Chrome head and stems Fits right or left Sold individually Fits H-D models Note: Not recommended for Buckhorn style bars or Sportster models Small Head (Mfg/N 1410) $59.99 Large Head (Mfg/N 1412) KURYAKYN ELLIPSE MIRRORS Chrome-plated Flat glass Features an oversized swivel ball for superior locking ability Hardware for a variety of H-D mounting applications is included 5-1/4 x 2-3/4 mirror O.A.L., 7 stem Available with flat or convex glass and feature an oversized swivel ball for superior lock ability Fits H-D models Note: Not recommended for Buckhorn style bars or Sportster models Flat Glass (Mfg/N 1437) $ Convex Glass (Mfg/N 1438) KURYAKYN MAGNUM MIRRORS Features sturdy stems and an oversized adjuster ball Available in 2 head sizes: Small head - 5 x 2-5/8 mirror O.A.L. Large head - 5-1/2 x 3 mirror O.A.L. Hardware for a variety of H-D mounting applications included Fits H-D models Note: Not recommended for Buckhorn style bars or Sportster models Small Head - Standard Stem (Mfg/N 1428) $99.99 Large Head - Standard Stem (Mfg/N 1430) KURYAKYN ZOMBIE MIRRORS Standard skull plus 35% more angst and 20% more anguish Mirror head is 3 x 4 with round glass 3 in diameter The smoothly arched stem positions the center of the mirror head about 4-3/8 above and 5-1/2 outboard of mounting point on the handlebar control Adjusts using swivel ball between opposing pins Hardware for a variety of H-D mounting applications included Mfg/N $ FINAL KURYAKYN MALTESE MIRRORS Flat glass is surrounded by a heavy, protruding bezel and accented by a knurled edge for a complete outlaw look Scalloped mirror arms extend from the bars with a swoop and are capped off by a stiletto styled end The bezel is easily removed to access and adjust the tension mechanism if necessary Hardware for a variety of H-D mounting applications is included Mfg/N 1425 Note: Not recommended for Buckhorn handlebars $ KURYAKYN SCYTHE & SCYTHE II MIRRORS Mirror head provides a sleek streamlined profile and is fitted with top quality optical glass, while the new stem features a graceful arc, placing the mirror head in a more user-friendly position Substantial, smooth operating swivels, adjust easily and hold their position securely All hardware included Note: Not recommended for Buckhorn handlebars. Scythe (Mfg/N 1449) $ Scythe II (Mfg/N 1448)

62 KURYAKYN MIRRORS & CAPS KURYAKYN BLIND SPOT TURN SIGNAL MIRRORS Alert drivers around you of your intention to move Mirrors have an L.E.D. amber turn signal directed to the side to get the attention of those drivers in your "blind spot" The flat glass has a beveled edge and a sculpted mirror head that moves a ball and socket mechanism Mfg/N 1435 Note: Not recommended for Buckhorn handlebars $ KURYAKYN BLIND SPOT TURN SIGNAL MIRRORS WITH INNER FAIRING MOUNTS Mirror heads and mounts are beautifully chromed and provide excellent rearward visibility Amber L.E.D.s in the outer edge of the mirror function as auxiliary turn signals and plug into the stock wiring harness Utilizes existing holes in the inner fairing on FLHX Models, but require drilling for installation on FLHT models. Includes a convenient template and all necessary hardware Mfg/N 1456 Direct replacement for FLHX or will fit FLHT, FLHTC, FLHTCU with re-drilled mount holes $ FINAL 340 KURYAKYN WINDSHIELD MOUNTED MIRRORS Sleek design blends a classy chrome windshield accent strip with gracefully curved arms to support the mirror heads Convex glass Turn Signal or Ellipse mirror heads are positioned just above the upper edge of the fairing to provide great rearward visibility By choosing Turn Signal mirror heads, you'll add auxiliary forward facing running and turn signals Fits Electra Glides, Street Glides, Trikes Windshield Mounted Turn Signal Mirrors (Set) Mfg/N $ Windshield Mounted Eclipse Mirrors (Set) Mfg/N Windshield Mount Only for Mirrors (ea.) Mfg/N Allows for installation of any mirror with 1/4-20 threaded stud KURYAKYN MIRROR CAPS Highlight those great lines by adding a sparkle of chrome in an unexpected location Also available with built-in amber auxiliary turn signals using simple plug-in connections Fits Street Glide; Electra Glide equipped with H-D# B Mirror Caps (Mfg/N 1427) $69.99 Lighted Mirror Caps (Mfg/N 1439) KURYAKYN TURN SIGNAL MIRRORS A heavy-duty locking mechanism and swivel ball keep these mirrors from moving L.E.D.s work for a running light and an auxiliary turn signal Mounting hardware for a variety of H-D applications is included Required Load Equalizer also included Not D.O.T. approved Available with flat or convex glass and feature an oversized swivel ball for superior lock ability Fits H-D models Note: Not recommended for Buckhorn style bars or Sportster models Flat Glass (Mfg/N 1431) $ Convex Glass (Mfg/N 1432) BIKER S CHOICE NEW PART NUMBERS ARE RED

63 PRO-ONE, JAY MIRRORS & CLAMP PRO-ONE WEEKEND WARRIOR MIRRORS Made from 6061-T6 aluminum and chrome-plated Will mount to all H-D mirror mounts Fits H-D Models Rectangular with Cutout Stem 4 x 2 mirror O.A.L., 6-1/2 x 3 stem Left $99.95 Right PRO-ONE TEAR DROP MIRRORS Made from billet aluminum and chrome-plated Will mount to all H-D mirror mounts 5-1/2 x 3-1/2 mirror O.A.L., 6 stem Fits H-D Models Right $99.95 Left PRO-ONE PRO-MINI MIRRORS Chrome All mirrors include hardware for custom, stock Harley-Davidson or metric cruiser Contoured Smooth Style 9 x 3-1/2 O.A.L H-D Models $ Blade Style 5 x 3 mirror head size Includes 2 lengths of stems: Long stem 5 x 4, short stem 3-3/4 x 3 Sold individually H-D Models $ Diamond Style 5 x 2-3/4 mirror head size Includes 2 lengths of stems: Long stem 5 x 4, short stem 3-3/4 x 3 Sold individually H-D Models $54.95 Tear Drop Style 5 x 2-3/4 mirror O.A.L., 7 x 4 stem H-D Models $ Face of FINAL JAY CLAMP-ON MIRRORS Highly polished, machined billet 2 round face Includes stainless steel hardware Sold individually Fits 1 handlebars Single Slotted $94.99 Dual Slotted CUSTOM MIRROR CLAMP Mounts stock H-D mirrors to 1 bars Sold individually $