Section 8. Corbin-Gentry Seats Fender Struts... 27, Fender Trim FLH, FLT Seats...7. Fenders. Front...

Transcription

1 Section 8 Corbin-Gentry Seats Fender Struts... 27, Fender Trim FLH, FLT Seats...7 Fenders Front Rear... 20, Luggage Racks...1, Saddlemen Seats... 3 Sissy Bars Sissy Bar Pads Solo Seats Springs and Brackets

2 Seats Victory Series Saddles fit FXST-FLST models and all rigid frames. FXST-FLST models require re-use of existing rear tab. C D Victory Smoothie Saddles for Softails Feature 2 piece design on a single steel base plate. Victory saddle seats fit FXST-FLST models and all rigid frames. FXST-FLST models require re-use of existing rear tab or separate purchase of a new tab. Rigid frames require separate purchase of front mount Description (C) Classic style with concho and chrome spots (C) Classic style with concho and black spots (D) Classic style with fringe and chrome spots Rear tab ( ) A C Victory Flatlander Saddles for Softails Feature low, frame hugging design. Fits FXST-FLST models and all Rigid frames. FXST-FLST models require re-use of existing rear tab or one can be ordered separately. Rigid frames require purchase of front mount Description (A) Original Style (C) Buttoned Rear tab ( ) 8-2

3 Seats Gunfighter Saddles Original one up rider design, for low looks and fast curves, by Corbin-Gentry, features fully comfort firm molded foam covered with breathable naugahyde to give years of service. Silverchrome trim accents driver and tail area. PCP Model Years Softail Saddlemen Long Rider The distinctive two texture cover of the Long Rider does two things: First, the looks are unmatched, the velour texture gives a look of luxury. Second, the velour provides uncompromising comfort, cool in the summer, warm when it s cold. The weather proof velour is durable and does not absorb water Softail (inc. FXST, FLST & Fat Boy) Dynaglide Smoothie Saddle Seat Black naugahyde cobra saddle features low frame hugging design. Fits FXST 2006-on & FLST 2007-on,. Order rear seat tab assembly separately Saddlemen Two-Up Saddle Classic, clean looks separate this comfortable two up saddle from all the others. It s beautifully stitched with a functional pattern that enhances softness and comfort Dynaglide 1991-on Saddlemen Drifter The highly comfortable Drifter perfectly follows the lines of your bike and has the spirit to separate you from the crowd. The rear portion also has enough cushion for a passenger. Drifter Dynaglide 1991-on Black 8-3

4 Seats Victory Plush Top Saddle The 11 short back, deluxe pillow set features dual saddle molded foam construction on a single steel base plate. PCP Models Years 6176 FX-FXE (Evolution) 1985 FX-FXE (Evolution) 1985-on seats will not fit with seat rail in stock position. Softail Saddles Black naugahyde saddles are constructed on a steel base plate. Order seat tab separately. PCP Year Style Smoothie Cobra FXST 06-on FLST 07-on Cobra on Cobra on Touring bucket on Seat tab and screw Touring Bucket Saddle Seat Black naugahyde low profile seat with frame hugging design Order rear seat tab separately Fits FLST, FXST 2007-on

5 Seat Brackets Chrome Billet Rear Seat Tab Features contoured rear shape and includes screw. Kits sit where rear tab is fastened by two screws Knob & Bracket Kit Attaches rear of seat on FX-FL & FXST models. Allows removal of seat without going under fender with wrench Kit Chrome bracket XL on FXST-FLST Seat Tab Screw Sets Screws have a 1/2 x 13 thread and fit into frame in front of the strut mount. O-ring included (A) Knurled Seat Mounting Brackets PCP Application Chrome rear seat mount tab XL ( ) Chrome rear seat tab (1/4 x 20) Chrome rear seat tab (1/4 x 28) Chrome rear seat tab Softail ( ) Colony Softail Seat Bracket Mounting Bolts Chrome Seat Mount Bolts FXR, Road King Secure rear of solo seat to hold front of passenger pad firmly in place. Allows for easy passenger pad removal. PCP Application (pair) /16 x 24 FLHR 1994, FXR /16 x 18 FLHR 1995-on Black Button Set Set of six with clips, for repairing or installing on custom seats Black Large Tuck and Roll Solo Seat Custom tuck and roll style solo seat made of black vinyl

6 Solo Saddle Seat FXST Butt Bucket Saddle Fits Softail models. Includes brackets for direct frame mounting FXST, FLSTF Pleated Signature Solo Seat Solo seat features carpeted metal baseplates and a premiumquality black naugahyde covering over the dense molded foam cushions. The solo seat, bolts to the stock seats mounts. Solo seat (measures 20-1/2 L x 13 W). Seat Fits 6678 FXST Installed on 2014 XLH Butt Bucket Solo Seat Black vinyl cover. Fits XL 2004-on Black Vinyl Solo Seat Set by Corbin-Gentry Black naugahyde seat with classic 3 button styling and metal baseplate. Measures 12 x 12 and has threaded inserts to accept bolts or studs to mount springs and nose bracket. Pad measures 7 x 11 and mounts by 5/16 bolts on the underside. Mount kit is sold separately. PCP Item Seat and rear pad 6636 Solo seat only 8-6

7 Solo Saddle Seat XL Contour Solo Seat and Frame Mount Solo Seats Corbin-Gentry designed black naugahyde on reinforced fiberglass base plate. PCP Model FLT FLHR XL Leather Solo Saddles Frame mounted to fit stock models. PCP Application Wyatt Solo Saddle for FXDWG PCP Application on Chrome Dash Panel Extension Fits FLT and FLHR 1996-on with shorter seat

8 Solo Seat Softail Solo Seat Kit Includes mount kit with springs, chrome frame cover and leather solo seat Solo Seat Kits FXD Includes leather solo seat and mount kit for FXD models. Order 1 or 2 springs separately. Kit Year on Solo Seat and Mount Kit for FXST Includes leather Police solo seat XL Leather Solo Seat Kits Kit includes K model seat, chrome 2 springs and mount hardware. PCP Years FXST Solo Seat Kit 2000-on Includes brackets andhardware to fit Softail models. Lower mount bracket includes integral frame cover. 4 seat springs supplied. PCP Item Seat kit Mount kit only 8-8

9 Solo Seat Rigid Seat Kit Includes 3 springs and solo seat Rigid Solo Seat Mounting Kit Custom solo seat mounting kit for rigid frames. Includes 2 hair pin springs, nose bracket and rear brackets. To mount Police and K solo seats, a cross bar, must be purchased separately Black Bates Style Tuck and Roll Solo Kit Genuine leather solo measures 13 W x 16 L with mount holes 6-5/8 c/c Velo Racer Kit Features thin profile with leather construction on stock formed steel baseplate. Edge is original cobbler style with ground and sanded edge. Seat measures 13 W x 16 L with 6-5/8 c/c on rear bolt holes Black Brown Chrome Alloy Solo Seat One piece aluminum forged seat features recesses to fit padded inserts Velo Racer Seat Features thin profile with leather construction on stock formed steel baseplate. Edge is original cobbler style with ground and sanded edge. Seat measures 13 W x 16 L with 6-5/8 c/c on rear bolt holes Black Brown 8-9

10 Solo Seat Metro Solo Seats Genuine black leather seats on a stock formed steel ribbed baseplate with a rolled and sewn edge; and custom styled black leather skirt. PCP Skirt Design Black spots and red rosettes Police with side spears and rectangles on rear Chrome spots with fringe Corbin-Gentry 1925 Standard Style Solo Seat This seat features genuine leather with an OEM style steelribbed base plate. Seams are finished by riveting a strip to seat pan, and then form fitting the covering to the strip for an authentic look Black (with leather rivet strip) Brown ( ) Softail Solo Seat Fits FXST models Solo Seat Features naugahyde construction with 6 genuine leather fringe or concho style skirt. Custom solo style accepts 3 or 5 springs. Seat measures 12 L by 9 W and can be mounted with or without seat T s. Matching pad features nickel spots and measures 14 L by 13.5 wide PCP Style Sonora Pad Chopper Solo Seats Smaller version in black or white vinyl. Includes nose bracket, accepts seat springs. 9 inches wide, 12-1/2 inches long Black Pillion Pad Black vinyl, measures 4-1/4 inches wide by 8-1/2 inches long Black

11 Solo Seat B D E A F A B C Replica Leather Solo Seats by Corbin-Gentry Constructed using genuine drum dyed leather cover with a molded foam pad on an accurate steel formed and ribbed baseplate with riveted brackets as original type. Authentic style seams are accomplished by first riveting a leather strip to the seat pan, then form fitting the leather cover to the saddle and finally sewing the cover to the strip. All seats measure 16 X 16 and fit stock seat T s. Skirts are constructed of Neo Royalite or leather, as noted. Black # Style Skirt Details B Fringe Leather Star-Rosette D 1948 Neo Conchas E Early Deluxe Leather Conchas Brown A Police Leather No skirt F Leather Concha-Crystal jewels and cobbler seam edge White A Police No skirt B Fringe Leather Blue Rosette C Spots Leather Blue Rosette Seat Cross Straps Will add extra support to Police and K style seats when they are not used with a T bar, such as on custom seat mount kits. Straps have holes for spring and seat mount. PCP Description Police K-models XLCH models

12 Solo Seat Mounting Brackets Solo Seat Mount and T Can be used on ST models with split tanks. PCP Item T Mount Universal Seat T Features slotted mounts to accept most solo seats Seat T and Piston Kit Fits Softail models. Includes black T, cylinder with internal spring, nose mount and related hardware. Drilling and tapping of frame required. PCP Fits Finish Black Chrome on Black Chrome frame cover Solo Seat Mount Kits Includes nose bracket, chrome springs, and rear brackets to mount small type solos. To mount larger Police seats, purchase cross bar separately. PCP Spring Type Application Coil Rigid Solid Dyna Glide Solid Dyna Glide Coil 2006-on FXD Hair pin Rigid Solo Seat Mount Bracket Allows mounting of spring set to underside of solo seats. May be drilled for extra application. Adds support to spring perches

13 Solo Seat Mounting Brackets FXST, FLST Auxillary Spring Set For use with seat T kit PCP # when mounting our buddy or solo seats. Dresses up under the seat area and will provide extra support when springs are engaged FLST, FXST Solo Seat Mount Kits Kit includes heavy duty seat T, pivot mount, 5 chrome springs and all related hardware. Accepts our standard Police Solo size seats. K model styles require use of cross bracket to provide adequate rear mounting distance between seat and fender. For the Dresser look, mount an auxiliary spring kit to this seat mounting assembly. A bracket is required to mount nose buddy seat. Note: Relay pack may have to be relocated to FXST, FLST 1994-on. Order Chrome frame # cover separately Seat mount kit Auxiliary nose mount bracket ( ) Chrome frame cover Black frame cover Chrome Solo Seat Bracket Kit Use this bracket kit to mount all Police size solo saddles on FXST, FLST models directly to the frame without the use of a T bracket. Kit includes all necessary hardware, 4 chrome springs and 2 chrome brackets. Order battery and frame cover separately. PCP Description Bracket kit ( ) Front bracket Spring cross support only FXST Solo Seat Bracket Kit Use to mount solo seats on FXST models. Note: front T can be used for a universal front seat mount on any frame. PCP Item 3717 Complete kit Front T FLT Solo Seat Mount Kit Mounting kit includes T bracket, 2 springs and strut bars for rigid mounting. #27348 for 1997-on uses a centre spacer for spring. Accepts standard size police solos and includes a black frame cover. Bracket #5537 (sold separately) is required to mount buddy seats on these kits. Seat is not included. PCP Application Bracket, Buddy seat

14 Solo Seat Mounting Brackets Seat Rail Mount Kit Mount kit allows attachment of PCP#6510, to seat T PC#4909 or OEM style (#54001,54002) when fitted with leather police style solo saddles with or without skirts. PCP Description Mount kit only 6510 Seat hand rail ( ) FL-FXST Frame Cover. PCP Fit Finish Chrome Black Passenger Pads Fit stock seat rails on FLH, FLT, FLHT. Available in pillow style naugahyde to match factory style seats. Includes clamp, 13 tall. Passenger pads will fit seat rail shown Pillow Hand rail fits only FLH ( ) Chrome Universal Tilt-Up Nose Bracket 3703 Fits through backbone of frame, 1-3/4 O.D. For mounting solo seats to most frames Fits through custom mount spacer (welded to top of frame) Rigid Frame Seat Mount Brackets PCP Item Kit 2257 Rear mount bar Chrome Passenger Seat Hand Rail Fits 2009-on FLT except FLTHTCU & TG Weld On Stantions Fits 1 and 1-1/4 cross tubes to support springs Solo Seat Weld-On Cast Clamp Mounts Mount solo seat springs to 1 or 1-1/8 diameter frame tubing. Includes flat washers and push on retainers for springs Pair

15 Solo Seat Mounting Springs Chrome Torsion Type Seat Spring Set 2256 PCP Size Type Regular Heavy Heavy Heavy Chrome Seat Springs Original, tapered barrel style in 2, 3 or 5 height. The and 7 have a heavy duty 6.5mm wire diameter for stable support. Order various length spring sets as required for height change PCP Size hole ½, other hole.530, other Mini Shock Mount Kits For Rigid Frames Kits include shocks and mounts. Replacement shocks are sold each. PCP Item Dual shock kit Dual shock kit Shock only (each) Shock only (each) XL Solo Hardware Mount Kits Kits include nose bracket, 2 springs, and rear bracket. To mount larger type police solos the additional purchase of a cross bar is required. PCP Application

16 Bolt-On Sissy Bars Separate Sissy Bar Side Straps and Backs (NOT FOR DETACHABLES) Application Sissy Bar Back Width Side Straps Hiboy 16 Back Lowboy 11 Back (insert style) Shorty Hand Rail 7-¾ Mini 6 FXST/C/S FXSTS FXWG FLSTS FXST, FXSTS / FLSTF, FXSTB / FLSTN / FLSTC 2000-on FLSTS FLST 2006-on* FLSTSC * require extra PCP #24050 Hardware kit FLST/C/F/N /4 8-3/ * FXD / FXDX 1999, 2002-on FXDXT / FXD/L / FXD / FXD 2006-on (not FXDWG, FXDF/ SE) Sissy Bar Plate Hardware Kit / ( ) FXDWG / FLHR / FXR / XL 2004-on 7-½ XL / XL *Note: Except 2006 FLSTFSE2, 2007-on FLSTB/F/SB/SE

17 Bolt-On Sissy Bars Button Sissy Bar Pads These pads will mount to stock sissy bars, single for shorter bars and the 2 button style for taller bars. Mounting brackets are included Pillow pad 5 tall. Fits our 14 Sissy Bar Pillow pad 10 tall. Fits our 19 Sissy Bar 4523 Smooth original style pad 13 T for stock 16 bar Mini Back Rest Black back rest mounts to short sissy bars using a stainless steel insert with chrome frame mounting system Solid Sissy Bars Solid steel, 9/16 square for models listed. 19 model will accept taller pad #4522. For 12 For 19 Width Year Bars Bars (Inches) Model 1228* 1237* 8-3/16 XLS-XLH /16 XLS-XLH (signal notch) /4 FXWG-FXST /16 FLST & FLSTF *Note:Must use PC#28109 signal extensions on 1990-on Chrome Dyna Sissy Bar Side Plates Chrome detachable side plates mount sissy bars with a width of a 8-¾. Fits FXDWG A Detachable Side Plates and Dockable Hardware Side Plate Hardware Year up Sportster Sportster Sissy Bar Side Plate Set Side plates are non-detachable and can mount sissy bars with a width of 8-3/4. Fits FLHR, FLTR and FLHX

18 Rigid Sissy Bars BT 49 Round Stock Sissy Bar 9-7/8 Inside at mount Chrome BT 33 Round Stock Sissy Bar 9-7/8 Inside at mount Chrome Chrome Round Sissy Bar Is constructed of 5/8 steel to fit 8-9 flat fender with belt drive. Height is Chrome Maltese Cross Sissy Bar Insert 4 1/4 tall x 3 5/8 wide with 1-¾ C/C mount holes BT 28 Square Rigid Sissy Bar 10 Inside at mount. Mount holes to be drilled Chrome

19 Rigid Sissy Bars Chrome Rear Fender Support Braces Steel 1/4 fender braces for 5 or 6 flat fenders or Fat Bob rear fenders when installed on rigid frames For Fat Bob fender For flat 9 chrome For flat 8.5 chrome Rigid Frame Sissy Bars Manufactured from 9/16 square steel then polished and chrome plated. Designed for Fatbob or 5 & 6 steel fenders. Note: height is measured from bottom of bar to the top. PCP Style Type Height Stock 794 Square Top Fatbob 23 Square Tilt Top Fatbob 28 Round New Style Fatbob 28 Round Tilt Flat 26 Round Note: Tire to fender clearance must be checked Flat Rigid Fender Braces-Raw Looks like PCP# 3009 from above, 1/4 steel with preformed bends for flat fenders. PCP Size Round Sissy Bar by Paughco These bars measure 1/2 round are 24 tall and 10 wide at the bottom for rear belt drive frames With bobbed fender With flat fenders, 5 and Chrome Fender Brace with Offset Brace for 9 fenders features an offset for pulley and wide wheel. PCP Finish Raw Chrome Rubber Washers (20 pack) Use to mount accessories to fender / /

20 Rigid Fenders Round Profile Chopper Fender British style round fenders have a raw finish. PCP Width Type Smooth Smooth Heavy Duty Flat Fenders These fenders are rolled of 16 guage steel. The wide width of 7-9 may require trimming for chain/belt relief. PCP Description Plain Plain Plain Plain Plain Plain Raw Bobbed Flat Fender Fenders feature rolled 16 gauge steel construction that may require trimming and finishing for chain relief. Note: these fenders have a depth of 1-7/8. PCP Width Sissy Bar Luggage Rack Made of solid steel and then chrome plated. Fits all 16 tall sissy bars. This unique design allows for easy installation or removal. May require drilling for some applications Rigid Frame Fender Clamp Set Rigid frame fender U-clamps. Set of 2 chrome clamps & bolts mounts fender to frame behind battery. 941 Chrome ( ) *We suggest pre-fitting all fenders prior to painting* Flat Washers For mounting fenders and rails. Measures 1-1/4 diameter with a 5/16 bolt hole pack

21 Front Fenders Narrow Front Fender Custom front fender for all FX, FXR and Sportster models with 35mm or 39mm front forks. Unpainted, and complete with assembled chrome or plain brackets. Use with 19 or 21 rims. PCP Description 6009 Unpainted with chrome brackets ( ) Unpainted with plain brackets ( ) FXR , XL 19 ( ) Stock Type Front Fender Raw fender with chrome brackets to fit FX, FXR and XL. No cable bracket on FXSTD Steel Front Fender Raw with chrome bracket ( ) Raw (no chrome) Replica Raw Steel Front Fender Raw steel fender is assembled with right side cable bracket. Fits FX, XL, FXR B Ribbed Front Fender with Bracket Ribbed fender with chrome bracket for use on 35mm and 39mm forks. Can be used on 18, 19 or 21 rims. Fits FXWG, FXST, FXSTC and XL. PCP Description Chrome fender with chrome bracket Raw fender with chrome bracket Raw Front Fender with Riveted Bracket Raw fender with riveted bracket for 39mm forks. Fits 1991-on FXD and XLH E Conversion Fender Spacer Kit This chromed fender spacer kit includes hardware to allow the use of any stock narrow glide fender on a 41mm Wide-Glide front fork. Spacers bolt to the slider assembly *We suggest pre-fitting all fenders prior to painting* Narrow Raw Front Fender Short style narrow front fender with riveted bracket for use with 35mm and 39mm glides. 4-½ width with braces. Fits FXR and 1983-on XL

22 Front Fenders Narrow Front Fender for Wide Glide & FXST A trim, tire-hugging fender complete with chrome brackets and ready to paint. A reproduction of the Original Equipment front fender to fit all FX 80-86, FXST and FXDWG OEM Unpainted 6089 Chrome FXSTS Front Fender Raw fender with chrome brackets for Springer Replaces Steel Front Fender Raw steel fender with braces for 19 wheel on 49mm forks. Fits 2008-on FLST with 49mm forks FXWG-FXST Glide Type Fender 1980-on Fits FX FXST 84-on & FXDWG 91-on Custom Narrow Fender for Dyna Wide Glide Fits 2006-on FXDWG models and features chrome brackets. For 21 wheels Front Fender Mount Kit Use chrome mount kit to attach front fender to original style assembly. Fits FXSTS Chrome Front Fender Mounting Kit Reproduction of stock Harley hardware used to install stock fenders. PCP Description FLST 1986-on FXWG, FXST FXST 1994-on w/acorn nuts *We suggest pre-fitting all fenders prior to painting*

23 Front Fenders FL -Style Fender for FXWG & Softail Custom fender for 21 front wheel as on (Wide Glide front ends), this high-quality metal fender comes with a raw oiled finish. Fits FXWG, FXST/C and Dyna WG If trim is desired, mounting holes must be drilled and trim is available separately Unpainted Replica Glide Fork Front Fender 1987-on Raw steel fenders PCP Application OEM FLT on FLT Front Fender Rail Light Kit Increase your visibility using our 12 volt amber running lights that mount to the front fender rail on FL, FLT Installation is quick and easy, just wire the kit to the stock fender tip light. Sold in pairs Front Raw Fender Fits FLH 14-on and FLHX 14-on. Replaces Glide Fork Front Fender 1987-on Raw steel fenders without trim holes PCP Application OEM on FLT FLT, FLHT FLHR B FLHX, FLTR FLH on FLH *We suggest pre-fitting all fenders prior to painting*

24 Front Fenders A B C Steel Front Fender For the Fat Boy Look Steel front fender for Fat Boy models and most FL, FXWG, and FXST models when a 16 wheel is used. PCP Application (A) FLSTF, FLST (no primer) ( ) Preston as above (no primer) but with welded brackets (no rivets showing) (A) FLSTF, FLST ( ) (A) FLSTF 2000-on ( ) (A) FLT 1980-on (Preston, no primer) (B) FXWG, FXST (Preston, no primer) (B) FLH (Preston, no primer) (C) 2008-on FXDF with 16 wheel Fender Adaptor Brackets Allows the installation of a narrower Fat Kid (FLST style) front fenders on FLT-FLHT with 16 front wheels. PCP Application Alloy Chrome billet Chrome ( ) (not w/fairing lowers) Wide Glide Front Fork Fenders 1986-on #88203 does not have light relief or trim holes. Fenders are not painted. PCP Fitment on FLST, FLSTN, stock ( ) As above, with no trim holes on FLSTC ( ) *We suggest pre-fitting all fenders prior to painting*

25 Front Fenders NOTE!!! THESE DO NOT FIT WITH 16 TIRES 6071 Spring Fork Style Fenders Classic springer style 5 wide for 19 wheels for most models. Give a classic look to the new machines. Assembled using rivets. PCP 19 Wheels 6071* FX , FXR , XL tires 6072* FL models 1949-on 19 tires Spacer set for above Fender only (no braces) PCP 21 Wheels Custom application 88209* FXSTS FXSTS *Note: These numbers are supplied with chrome braces. Front Fender & Trims PCP Description FLST/C Heritage 1986-on ( ) (ea) FLTC/U Ultra-Tour 1889-on ( ) (ea) Fender light compl.1979-on ( ) FLT F/Fender (raw) ( A) FLSTC F/Fender (raw) ( ) FLSTF 2000-on ( A) Lamp lens 1980-on, amber ( ) Lamp gasket 1980-on ( ) FLST/C Chr. F/fender trim ( ) FLT , FLHS , FLHT 1996-on, FLHR 1994-on F/Bumper assembly ( D) FL Bumper only 1977-on ( B) Chrome or Brass Fender Tips Beautifully crafted fender tips in chrome or polished brass, with eagle or no eagle. Fits fender width as noted. PCP # Style Width Type A Eagle 4 FXWG-FXST (narrow fenders) B Smooth 4 As above C Smooth 5 FX 2187 C Eagle 5 FX 2186 As above in polished brass D Smooth BT 2185 E Eagle BT 2184 As above in polished brass *We suggest pre-fitting all fenders prior to painting*

26 Front Fenders Wyatt Gatling Steel Front Fenders Laser cut from full one piece blanks. Spacers required for use on 41mm glide forks for 19 wheels. Note: We suggest pre-fitting all fenders before painting. All fenders require determination of hole location and drilling to mount. Coverage O.D. of Inside PCP (Degrees) Wheel Bracket Width /2 4-3/ /8 4-7/ / /2 4-3/4 Softail Slim Front Fender Raw steel fender without trim holes Replaces on FLS Softail Slim models Chrome Fender Mounts Are.750 thick to mount custom fenders to wide glide forks Pair *We suggest pre-fitting all fenders prior to painting*

27 Rear Fender Fat Bob Rear Fender Kit for FXR Models A complete Fat Bob Rear Fender Kit for all FXR models from and FXRTs. The rebellious upswept kick of the chopper-style rear fender is combined with our smooth, chromed steel fender struts that not only improve styling but provide improved fender support over the original equipment parts. Accepts all of PCPI s taillight kits with Fat Bob mounts, or the stock (OEM ) taillight bracket. This kit and its components are not compatible with Original Equipment or aftermarket sissy bars Unpainted fender kit Note: These fender struts are not designed for the standard Original Equipment fender, nor will this fender mount correctly to the standard fender struts. FXR Stock Type Rear Fender PCP Application FXR models ( A) Chrome Rear FXR Fender Struts Diecast as stock and then an excellent chromed finish FXR (not FXRT, FXRP (59500/1-84) FXR (not FXRT, FXRP) (59542/4-87) FXR Rear Bobtail Fender Kit Kit includes steel fender, struts and bolts Dresser Style Rear Fender 6.5 wide undrilled, smooth steel fender with bobbed end Uses either stock or smooth struts Mounts to FXR, FXD and XL models with a 6.5 wide fender Installation requires drilling of holes *We suggest pre-fitting all fenders prior to painting*

28 Rear Fender Touring Smooth Rear Fender Smooth fender is 7 wide without tail lamp cut out. Fender has mount holes in side and a raw finish. For 16 wheel on FLT/HT, FLHR, FLTR, FLHX We suggest pre fitting the fender prior to painting FLT Smooth Rear Fender 2009-on Smooth 8-¾ wide custom rear fender is not drilled. We suggest pre fitting the fender prior to painting FLT Stock Rear Fender 2009-on Rear drilled fender has a primered finish and is 8-¾ wide. Fits FLT, FLHT/C/U, FLHR 2009-on. Replaces FLT Replacement Rear Fender We suggest pre fitting the fender prior to painting Touring Rear Fender Steel rear fender is 8-5/8 wide. Does not include cutout for tail lamp *We suggest pre-fitting all fenders prior to painting*

29 Rear Fender FXD Rear Fenders PCP Application USA ( A) FXST Style Rear Fender Kit Kit fits and includes steel fender, chrome struts in smooth or stock style, chrome license plate bracket and taillight with hardware Stock struts Smooth struts FLSTF Style Replacement Fenders For FLST, FXST 1986-on models. Accepts PCP# 406 tail lamp. Features one piece design.we suggest pre fitting the fender prior to painting. PCP Fitment , Raw one-piece design ( ) on ( B) Chrome struts ( , ) *We suggest pre-fitting all fenders prior to painting*

30 Rear Fender Rear Fenders for Heritage Softail & FLSTN Features turn signal mounting holes, taillight mount, and fender reveal. Ready to use as an Original Equipment replacement or for FXST models wanting to change over to full one-piece fenders. Unpainted. PCP Description Stock style Heritage Softail (no primer) ( A) Smooth style Softail as a custom fender. No taillight holes Chrome fender struts (pair) Plastic fender splash guard ( A) Hinged Rear Fenders for Softail Models We offer Heritage-style rear fenders with hinges. They re available in tail light version which fit the OEM struts of all Softail models With 1973-on taillight mount FXST, FLST Rear Fender Extension 1986-on Replaces stock plastic extension Curved chrome Stainless ( A) Chrome Fat Bob Rear Fenders for FXWG & Softails Reproductions of the OEM pieces. Both fenders include the wire loom clips and necessary strut mounting holes as stock. They accept stock taillight assemblies as well as Cateye and Lucas taillights/brackets as found in Section 3. Fenders PCP Description Type FXWG ( ) Primered FXST/C and FXSTS Primered ( A) FXST/C and FXSTS Raw FXST ( ) Raw on FXST ( ) Raw Struts and Guards Plastic fender splash guard for FXST ( A) Chromed struts for FXST fenders Taillights and Brackets Black taillight bracket ( ) Chrome taillight bracket ( TA) 406 Stock taillight assembly ( A) 1231 Custom Fat Bob taillight bracket assembly FLST Replacement Rear Fenders for 2006-on Can also be used on all 1986-on FXST models. PCP # uses #406 tail lamp and includes indent for turn signal bar. PCP# does not have taillight cut or signal indents Replica *We suggest pre-fitting all fenders prior to painting*

31 Rear Fenders EZ Bob Rear Fender Kit For Sportster Models Includes steel fender and chrome taillight bracket which includes PCP #884 cateye taillight. If required, order chrome struts and covers separately. PCP Item Fender kit Fender kit Fender kit ( ) up Fender kit Related Parts Fender only Taillight bracket on Taillight bracket 884 Cateye taillight Chrome struts Chrome struts Chrome strut covers Sportster Bobbed Rear Fender Mounts to stock strut bars With holes T/L Sportster Bobtail Fender Kit Custom styled Bobtail fender fits 1999-on XL models. Use of this fender requires the separate purchase of installation kit # or Primered finish ( ) Custom Chopped Rear Fender Heavy duty steel fender mounts to frame the same as OEM stock fender. Fits XL and XL 2007-on with ECM cutout. Replaces Rear Fenders & Trim PCP Description 66955* Fender FXST ( A) 66985* Fender FLT ( B) Rear lamp assembly FL 1979-on ( ) Rear lense FL , FLST 1986-on ( ) Rear lense gasket FL1980-on ( ) (5 pk) * USA Chopped Rear Raw Fender Fits XL 883N, 1200N 10-on & will fit XLH 04-on. Shorter than bobbed fenders so it is recommended that a side mount tail lamp be used as stock lamps will not fit with this fender *We suggest pre-fitting all fenders prior to painting*

32 Rear Fenders Bobbed Steel Rear Fender for FXD-FXDWG Fenders are also OE replacements for FXDWG models. PCP Year Custom Steel Fenders by Wyatt Gatling Smooth formed, undrilled fenders are perfect for the builder s custom applications. Rear PCP Width Length End to End left belt Measurement Note: Length is measured from tip to tip across the top of the fender and end to end length is measured along the side of the fender Custom Fender Mount Kit Includes rubber bushings Steel Replica Rear Fender Fender mounts to stock struts and has tail lamp hole. PCP Fitment XL XL ( B) Raw Steel Bobbed Rear Fender Custom plain fender does not have tail lamp cutout, is not drilled and does not have wiring tabs on the inside. Fits XL Wide Bobbed Steel Rear Fender Fits FXST struts when used on wide style frames With holes Without holes, for 200 series tires *We suggest pre-fitting all fenders prior to painting*

33 Wide Rear Fenders FXST Strutless Rear Fenders Fit frames when width is 11 inches where original struts attach. Length measurements are taken fron the front flat area to the end. PCP# weighs 21 pounds. PCP Width Tire Length / Chrome Fender Brace with Offset Brace for 9 fenders features an offset for pulley and wide wheel. PCP Finish Raw Chrome Rigid Rear Fender Brace Set Two piece design can accomodate any width fender. PCP Finish Chrome Raw Chopper Fenders with Round Profile British style custom raw fenders are vailable smooth or with center rib. Note: fenders have tooling marks on the rolled or beaded ends from the manufacturing process. Test fit and preparation is required before priming and painting. Smooth Ribbed Width Smooth Ribbed Width

34 Sportster Rear Fenders E-Z Bob Rear Fender for Sporster Steel fender. Order struts separately Rear Sportster Steel Fenders 1982-on PCP Description 6079 Plain rear replacement fender with taillight mount XLS, 1979-on XL ( A) ( C) Stock ( A) USA Stock ( ) T/L Sportster Bobtail Fender Kit Custom styled Bobtail fender fits XL models. Use of this fender includes the installation kit # Primered finish ( ) 6479 XL Chrome Rear Fender Supports Chrome ( & ) (pair) Chrome ( & ) (pair) Allen bolt set for above struts XL Steel Rear Fender Stock style fender replaces Chrome Rear FXR Fender Struts Diecast as stock and then an excellent chromed finish FXR, FXRT/P (59500/1-84) FXR, (not FXRT/P) (59542/4-87) 8-34 ADVISORY*** ALWAYS INSTALL FENDERS BEFORE PAINTING, TO MAKE SURE OF FITMENT. XL Chrome Strut Covers 1982-on Chrome plated covers fit over existing shock struts. PCP Application ( ) ( ) ( ) (59902/3-04)

35 Rear Fender Struts Rear Chrome Fender Struts (USA) PCP Description (sold in sets)) Black struts FXSTSB 1995 ( , ) Chrome FXST-FLST Fender Struts PCP Fitment FLST/C (599694/9-86A) FXST, FXSTC, FXSTS (59954/9-86A) Left & Right smooth FLST stock (59954/5-00) Chrome mount bolt kit FXST FXST Curved Strut Set Fits 9 fenders on FXST models Softail Chrome Rear Struts FLST, FXST, FXSTS (59954/5-03) Rear Fender Strut Mounting Kit Chrome low profile allen hardware kit Mounts 4 hole struts on speed Heritage Softail or Fat Boy ( ) 9921 Mounts 6 hole struts on FXST/C/S and Bad Boy ( ) FL , FX (except FX Deuce) Buttonhead bolts, as above Sportster 2004-on FL 2004-on and FX 2003-on Chrome Rear Strut Sets 2000-on PCP Application Type FXST Replica FLST Replica FLST Smooth FLST 2008-on Replica FLST 2008-on Smooth FXST Replica FXST Smooth

36 Rear Fender Struts Lower Ribbed Front Fender Trim Chrome ribbed lower fender trim is shaped to match the stock front fender. PCP Application 4844 FL (2 1/2 ) ( ) Touring models 1986-on, FLSTC/N 1986-on (3 1/4 ) ( ) Chrome Fender Strut Set All sets are pre-drilled with the correct mounting holes. Installation of FXWG style struts on FX 4-speed models will permit mounting of wide FL tailgate or FXWG bobbed fenders FXWG holes, back hole is countersunk As above, less turn signal holes Chrome Front Lower Fender Trim Chrome plated with a smooth finish and fits all FLH. PCP Application 4845 FL/T/HT/HS ( ) FLST/C, (3 1/4 tall) ( ) Chrome Allen Fender Strut Bolt Kits Kits include allen head bolts, washers and nuts for mounting fender. PCP Description FXST FXWG FX XL 1982-on 1734 Chromed Rear Fender Support Mounting Kit 1734 Acorn fender rail screws FX 71-86, XL Cap kit fender rail screws FX 71-86, XL Acorn rear support mounts FXST

37 Fender Trim Chrome or Brass Fender Tips Beautifully crafted fender tips in chrome or polished brass, with eagle or no eagle. PCP Model Wide FLH FXWG, FXST, XLX front 2187 FX, XL front ( T) 2186 As above in polished brass 2185 Wide FLH ( T) 2184 As above in polished brass Eagle Front Fender Ornaments These diecast fender ornaments are highly detailed and available chrome version. Mounting bolts and gaskets are included. The smaller version measures 6-3/4 long and 1-1/2 wide and 2 tall Chrome Diecast Fender Skull Ornaments Top quality fender trim with or without illuminated eyes. They are offered in all chrome or a chrome and gold inlay. Definitely something different to set your bike apart Chrome with illuminated eyes Chrome with gold inlay and illuminated eyes Front Fender Lamp 1949-on Clear lense ( ) Amber lense Chrome Front Fender Skull Trim Chrome strip with small skull attaches with adhesive tape. Fits 1990-on FXD and 1991-on XL. Each Chrome Steel Lower Fender Trim Rail Includes 2 stanchions and 1 ball in the center. ¼x20 Threads mount studs. Fits 1949-on FL

38 Fender Trim Reflectors Adhesive Backed OEM type, DOT approved PCP Colour Description Amber F/fender FXST, 86-on FLST ( ) (pair) Red R/fender FL, FX, FXST, 86-on FLST, 72-on XL ( ) (pair) Red R/fender 93-on FXSTC/S/F (framed) ( ) (pair) Red R/fender XL ( ) (pair) Amber R/fender 92-on Dyna ( , ) (set) Red Rear tail light bracket ( ) (each) Skull Fender Mudflaps Both mudflaps are black with a white imprinted skull emblem that has red reflector eyes. Both measure 6 1/2 wide at the 3 fender mount holes (hardware included) Large size (bottom 10 1/4 wide by 8 high) Small size (bottom 9 1/2 wide by 6 1/2 high) on FLSTF Fender Tips Rear Front Tri-Bar Rear Fender Lamp With smoked lens and red LED. The LED s glow in running mode and will increase in intensity when the brakes are applied. Tail lamp comes with hardware, wiring and OEM loom connectors. Fits FLT Order extension separately. PCP Item Lamp Extension Chrome V Fender Tips Fits 1997-on FLSTS. PCP Description Front Rear Chrome Rear Fender Tip with Smoked Lens Fits FLT Chrome Front fender Tip with Smoke Lens Amber LED with smoke lens. Replaces on 14-on FLT, FLHT

39 Fender Trim Lighted Rear Fender Tips Replaces OEM items on 1979-on FLT in chrome plastic with lights installed. Red Amber Fitment Bulb on FLT LED FLT LED FLT Bulb FLT LED FLT LED FLT LED FLT LED FLT LED LED Fender Tip Lamps Fit 1980-on models. PCP Type Colour Rear Red Front Amber Clear Fender Tip Lens Kit Kit includes 2 LED bulbs, 1 red and 1 amber. Fits FLT, FLHR and 1986-on FLSTC and FLSTN (not w/clean front fenders or Springer FLST,FLHX,FLHRS or FLTR) Lighted Fender Tips Replaces OEM items on 1979-on FLT in chrome plastic with lights installed. Front lights are amber and rear are red. PCP Description Front fender light ( ) Front lens only ( ) Front fender light with bulb 2000-on FLT Rear fender light ( ) Rear lense only ( ) Front fender tip grill Front amber lense with blue dot

40 Fender Trim Stainless Steel Fender Trim Set Includes 2 of 9 and 2 of 10 strips for the top of all 7-1/4 wide ridgid, swingarm, or bobbed rear fenders. T-bolts and template provided to ease installation Front Fender Rail for FLT Models Styled after the front bumper used on Panheads to the mid- 60 s. This front trim is formed from 3/4 chromed steel tubing. Front and rear fender rails set the bike off. ( A) V-Design Front Fender Side Rails These fender side rails come as a set with hardware Stainless Steel FLT 1967-on ( T) Chrome FL touring (not Road Glide or Road King Custom, FLST/C/N 1986-on ( T) (requires purchase of T bolt kit) T bolt kit (4 T-bolts, 4 lock washers, 4 nuts) Rear Fender Rails for Heritage Models Styled after the rear bumper used on Panheads to the early 60 s. This rear trim is formed from 3/4 chromed steel tubing Heritage Softail ( ) FLST 2000-on ( ) Chrome Fender Nameplate for Road King (each) Chrome Fender Trim Rails PCP Model Fender on FLT Rear FLT Rear Chrome Fender Nameplate for Ultra Classic A (each) Glide Fender Nameplate Chrome nameplate for FL-FLH (pair) Mini Luggage Rack Mounts on H-D King Tour Pak. Fits nicely inside indent. Also fits other tour packs with 10 inch flat square surface. Pack measures 11-1/4 long x 9-1/4 at front and 10-1/2 at rear Chrome Skull Front Fender Strip Chrome strip with skull design to fit FL models. ( )

41 Fender Trim Heritage Chrome Fender Rail (not FLSTS) PCP Application Rear 2000-on FLST/C ( ) Chrome Front Fender Trim Rail Features V-Design for 1987-ON FLT-FLST-FLHR models. Does not fit FLSTS on FLST/C, FLSTN ( ) Rear Fender Rail Insert Fits Tour Glide, FLHS, FLHR, FLHT/C/U and FLHX. Not for Road Glide or Road King Classic A Front and Rear Bumpers Bumpers feature rubber inserts as OEM. PCP Description (A) Front FLT , FLHT 1996-on, FLHS FLHR 1994-on (not 1998-on FLTR) ( D) (A) Front rubber insert FLT ( A) Reflector speed nut (8126A) (10 pack) Front Fender Rail Insert Fits 1980-on Tour Glides, FLHTC/I, FLHTCU/I. Not for use on 1998-on FLTR/I, FLHRS or 1994-on FLHR/I A Chrome Rear Luggage Rack Fits FXST models Chrome Bumper Trim Rail For FLST Front

42 Luggage Racks Contour Fender Racks Feature solid steel construction for use with solo seats. PCP Application FXST FXST-FLST FXDWG on FXDWG FLHR (11 ll x 6-5/8 ) Grab Rail Sissy Bar Kit Grab rail kit with mount bracket and 8-½ sissy bar top. May require making permanent modifications to the fender which may void your warranty. Fits FXST 1986-on and FXD & XL 91-on Chrome Luggage Racks FXWG, FXST Luggage racks fit FXWG, FXST, FXSTC and FXSTS models as well as any other Big Twin models which have been converted to a Fat Bob rear fender and many swing arm frames fitted with a bobbed rear fender. PCP Description Bobtail rack, FXST/B/SB/C ( A) Bobtail luggage rack ( ) Bobtail rack FXST/B/S ( ) on Softail ( ) Luggage Rack Pad Measures 12-3/4 x 9 with quicker release spring loaded clamps to fit 3-channel stock luggage racks Pad Mount clamp kit

43 Luggage Racks Chrome Rear Fender Luggage Racks Available to fit a variety of models, these new luggage racks are easy to install and remove. Triple chrome plated and made out of 3/8 steel tubing. Mounts to stock seat bracket and license plate bracket. 10 Pound maxium load all FXR, FXE ( 9-1/2 L x 6 W) all FLST (10-1/2 L x 6 W) FXDWG (9 L x 6 W) FXDWG ( ) FXD (9 L x 6 W) Note: The cargo capacity of these racks is limited to ten pounds or less Chrome Bolt-On Luggage Rack Bolts on to the sissy bar side straps Outside width is 7-¾ and inside width between the mount brackets is 5-¾ For loads up to 10 pounds Fits FXD & XL 2004-on Sportster Chrome Luggage Racks Measure 6 x 8 for fender mounting on XL s. For loads of 10 pounds or less. PCP Application Seat Stock on Stock Solo ( ) Solo on Solo

44 Luggage Racks Chrome Three Rail Luggage Rack 1960 s Style retro style racks fit FXST-FLST but not FLSTS. Note: FLSTF models require turn signal relocation. PCP Description (11-3/4 L x 8-1/2 W) ( ) on FLSTF, 08-on FLSTC Chrome Luggage Rack Arched fender support and hidden hardware make rack appear floating. Side mounting holes are 1-¼ C/C. Fits FLHT , FLHR , FLHX T/L Chrome FLHR Luggage Rack Fits FLHR, FLHT and FLTR A Retro Luggage Rack Fits FLHR with solo seat. PCP Year Old Style Luggage Rack Replica of 1940 s accessory. Contours to all fenders 1934-on. Great for attaching throw-over saddlebags. Does not interfere with post mounted buddy or police solo seats. PCP Finish Polished 3215 Chrome Vintage Black Luggage Rack 1940 s style to fit EL and FL rear fenders Not countersunk for OE screws and hardware not included No interference with post mounted buddy or police solo seat Max load 10 pounds