METRIS 250 Meter Parts List
|
|
- Alexandra Lester
- 6 years ago
- Views:
Transcription
1 METRIS 250 Meter Parts List
2 This is a comprehensive catalog of the METRIS meter parts for Itron, Inc. It contains parts used in current production. All parts information and descriptions in this document are believed to be accurate, but are not guaranteed. Some parts may not be backward compatible with older versions of the product type. For information on part numbers, descriptions or assemblies in previous models of Sprague, Schlumberger or Actaris meters, contact Itron Support Services at Parts list effective September METRIS 250 Parts List TDC Proprietary and Confidential 2
3 Contents Special Tools... 6 Meter Top Assembly Badge and Rivet... 7 Meter Bottom Casting... 7 Hand Hole Cover... 7 Index Cover... 7 O-Ring Hand Hole Cover... 7 Case Gasket... 7 Index... 7 Outlet Seal... 7 IDM Assembly... 7 Drive Dog... 8 Tangent Adjustment Assembly... 8 Flag Arm Link... 8 Security Seal Cup... 8 Security Seal... 8 Valve Cover Guide... 8 Gear Shaft, Helical Worm... 8 Valve Cover... 8 Retaining Clip... 8 Screws... 8 Center Module... 8 Meter Connections LT Swivels LT Connection Nut LT Connection Nut Tin LT Connection Nut Washer... 9 #1 Sprague/1A Standard Swivels... 9 #1 Sprague/1A Standard Connection Nut... 9 #1 Sprague/1A Standard Connection Nut Washer... 9 #1 Sprague/1A Standard Connection Blind Washer /4 (1 Pittsburgh) Swivels /4 (1 Pittsburgh) Connection Nut /4 (1 Pittsburgh) Connection Nut Washer LT Swivels LT Connection Nut LT Connection Nut Washer LT Connection Nut Tin METRIS 250 Parts List TDC Proprietary and Confidential 3
4 30 LT Swivels LT Connection Nut LT Connection Nut Washer LT Connection Nut Tin METRIS 250 Parts List TDC Proprietary and Confidential 4
5 METRIS RM/MB METRIS 250 METRIS Measurement Module METRIS 250 Parts List TDC Proprietary and Confidential 5
6 Item No. Quantity Part No. 6" RM MB Description Item No. Quantity Part No. 6" RM MB Description Manufacturing badge: Module assembly: NTC 5# MAOP (ft 3 ) NTC ft TC 5# MAOP (ft 3 ) TC ft 3 (shown) NTC 10# MAOP (ft 3 ) NTC m TC 10# MAOP (ft 3 ) NTC m 3, reverse stop TC, 35 kpa (m 3 ) TC m NTC, 35 kpa (m 3 ) NTC, ft 3, reverse stop Customer badge (blank) Top case assembly RM/MB Rivet 1/8 x.254 (4 required if customer badge) Manifold seals Case screw RM manifold assembly includes SU Bottom case with badge holes manifold with inlet & outlet hub (regulator included with RM only): Outlet seal /4" Inlet, #1 Sprague/1A Standard Top case assembly, includes 6 center-to-center /4" Inlet, 10 LT top, IDM assembly & hubs: /4" Inlet, 20 LT #1 Sprague/1A Standard " Inlet, #1 Sprague/1A Standard LT " Inlet, 10 LT LT " Inlet, 20 LT LT Manifold screws /4" (1" Pittsburgh) 21 Call Sales Order Analyst 1 Orifice /4" (ISO BSP G 1/1-4 ) MB plate/manifold regulator seal O-ring hand hole cover 23 Call Sales Order Analyst B42R regulator without valve body SU Hand hole cover Retainer plate screws Seal cup Valve cover (lapped), rear Security seal (red) Valve cover (lapped), front Hand hole cover screws Retaining clip Index mounting screws Gear helical worm: IDM assembly Metric, m 3 Index: Cubic feet, ft Standard 4-circle dial/clock (ft 3 ) NTC Tangent crank assembly: Standard 4-circle dial/clock (ft 3 ) TC NTC ft Standard 5-digit direct read/odometer (ft 3 ) NTC TC ft 3 (shown) Standard, 4-digit direct read/odometer (ft 3 ) NTC NTC m 3, reverse stop Standard 5-digit direct read/odometer (ft 3 ) TC NTC m Standard 4-digit direct read/odometer (ft 3 ) TC TC m Standard 5-digit direct read/odometer (m 3 ) NTC NATC ft 3, reverse stop Standard 5-digit direct read/odometer (m 3 ) TC Flag arm link PSI PC, 4-circledial/clock (ft 3 ) Valve cover guide PSI compensating, PSIA base, Drive Dog 4-circle, (ft3) NTC & TC Index cover screw Standard 7-digit direct read (m 3 ) TC Standard 7-digit direct read (m 3 ) NTC Index cover with RTV gasket Case gasket Special Tools METRIS proving wrench IDM Tool Prover plug METRIS prover platform Orifice wrench Regulator adjustment wrench METRIS 250 Parts List TDC Proprietary and Confidential 6
7 Meter Top Assembly 6 Badge and Rivet Assembly includes top casting, IDM, hubs Exploded view item number 1 Exploded view item number NTC 5# MAOP (ft 3 ) #1 Sprague/1A Standard TC 5# MAOP (ft 3 ) LT meter top assembly NTC 10# MAOP (ft 3 ) LT meter top assembly TC 10# MAOP (ft 3 ) LT meter top assembly TC, 35 kpa (m 3 ) /4 (1" Pittsburgh) meter top assembly NTC, 35 kpa (m 3 ) RM top with IDM meter top assembly Blank aluminum EMB Aluminum embossed Rivet 1/8 x Meter Bottom Casting Hand Hole Cover Exploded view item number 3 Exploded view item number SU Meter bottom casting with badge holes SU Hand hole cover Hand hole cover, PFM, Pete s plug Hand hole cover, PFM, 1/8 pipe plug Index Cover Exploded view item number 14 O-Ring Hand Hole Cover Exploded view item number Index cover with boss and RTV (standard) Index cover with ports and RTV O-Ring hand hole cover Case Gasket Indexes Exploded view item number 15 Exploded view item number Case gasket, cork/neoprene Index Test Dials ½, 2 Standard 4-circle dial/clock (ft 3 ) NTC ½, 2 Standard 4-circle dial/clock (ft 3 ) TC ½, 2 Standard 5-digit direct read/odometer (ft 3 ) NTC Outlet Seal ½, 2 Standard 4-digit direct read/odometer (ft 3 ) NTC ½, 2 Standard 5-digit direct read/odometer (ft 3 ) TC ½, 2 Standard 4-digit direct read/odometer (ft 3 ) TC Exploded view item number ½, 2 Standard 5-digit direct read/odometer (m 3 ) NTC * Standard 5-digit direct read/odometer (m 3 ) TC Outlet seal ½, 2 2 PSI compensating, 4-circle dial index (ft 3 ) NTC & TC ½, 2 2 PSI compensating, PSIA base, NTC & TC 4-circle, (ft 3 ) * Standard 7-digit direct read (m 3 ) TC IDM Assembly Exploded view item number 12 *50dm 3, 10dm IDM assembly for slant face Type * Standard 7-digit direct read (m 3 ) NTC METRIS 250 Parts List TDC Proprietary and Confidential 7
8 Drive Dog Tangent Adjustment Assembly Exploded view item number 31 NTC Exploded view item number Drive dog (male) NTC ft TC ft NTC m 3, reverse stop NTC m 3 Security Seal Cup TC m 3 Exploded view item number NTC ft 3, reverse stop Security seal cup Security Seal Flag Arm Link Exploded view item number 29 *Exploded view item number 9 (017167) Flag arm link Snap seal (red) used in hand hole cover and index Snap seal (red) used in case Valve Cover Guide TC Gear Shaft, Helical Worm Exploded view item number 27 Exploded view item number Valve cover guide Helical worm Valve Cover Helical worm, metric Exploded view item number Rear (lapped) Front (lapped) Retaining Clip Exploded view item number Retaining clip Screws Exploded view item number 10, 2, 32, 11, and not shown. Part Number Quantity Location x 1/2 slotted pan head hand hole cover 2 Hand hole cover Center Module Exploded view item number NTC ft TC ft NTC m NTC m 3, reverse stop TC m NTC ft 3, reverse stop /4-20 x 3/4 hex-head 10 Case x 5/8 cross-slotted x 3/8 Fillisterhead index mounting screw x.775 cross-slotted 3 Index cover 2 2 Index to meter Itron AMR devices METRIS 250 Parts List TDC Proprietary and Confidential 8
9 Meter Connections 10 LT Swivels #1 Sprague/1A Standard Swivels LT x 3/4M galvanized swivel #1 Sprague/1A Standard x 1M M.I.* black swivel LT x 3/4M galvanized swivel with plug #1 Sprague/1A Standard x 1M black swivel with plug LT x 3/4M galvanized, insulated swivel #1 Sprague/1A Standard x 1M black, insulated swivel #1 Sprague/1A Standard x 1M black insulated swivel with plug #1 Sprague/1A Standard x 1M galvanized swivel 10 LT Connection Nut #1 Sprague/1A Standard x 1M galvanized swivel with plug LT galvanized connection nut #1 Sprague/1A Standard x 1M galvanized, insulated swivel #1 Sprague/1A Standard x 1M galvanized, insulated swivel with plug #1 Sprague/1A Standard x 3/4F galvanized swivel 10 LT Connection Nut Tin #1 Sprague/1A Standard x 3/4F galvanized, insulated swivel Part Number #1 Sprague/1A Standard x 3/4M galvanized, insulated swivel #1/1A Standard x 3/4M M.I., * black swivel LT connection nut tin *malleable iron 10 LT Connection Nut Washer #1 Sprague/1A Standard Connection Nut LT connection nut washer #1 Sprague/1A Standard black connection nut #1 Sprague/1A Standard galvanized connection nut #1 Sprague/1A Standard Connection Nut Washer #1 Sprague/1A Standard connection nut washer #1 Sprague/1A Standard Connection Blind Washer #1 Sprague/1A Standard blind washer METRIS 250 Parts List TDC Proprietary and Confidential 9
10 1-1/4 (1 Pittsburgh) Swivels 20 LT Swivels (same as 1A swivels) #1 Sprague/1A Standard x 1M M.I.* black swivel LT x 1M black swivel #1 Sprague/1A Standard x 1M black swivel with plug LT x 1M black, insulated swivel #1 Sprague/1A Standard x 1M black, insulated swivel LT x 1M galvanized swivel #1 Sprague/1A Standard x 1M black insulated swivel with plug LT x 1M galvanized, insulated swivel LT x 1M galvanized swivel with plug #1 Sprague/1A Standard x 1M galvanized swivel LT x 3/4M galvanized swivel #1 Sprague/1A Standard x 1M galvanized swivel with plug LT x 3/4M galvanized, insulated swivel #1 Sprague/1A Standard x 1M galvanized, insulated swivel #1 Sprague/1A Standard x 1M galvanized, insulated swivel with plug #1 Sprague/1A Standard x 3/4F galvanized swivel #1 Sprague/1A Standard x 3/4F galvanized, insulated swivel #1 Sprague/1A Standard x 3/4M galvanized, insulated swivel LT x 3/4F galvanized swivel LT x 3/4F galvanized, insulated swivel LT x 1M black swivel 20 LT Connection Nut 1-1/4 (1 Pittsburgh) Connection Nut LT black connection nut LT galvanized connection nut 20 LT Connection Nut Washer /4 black connection nut /4 galvanized connection nut /4 plated connection nut LT connection nut washer 1-1/4 (1 Pittsburgh) Connection Nut Washer 20 LT Connection Nut Tin (same as 1A connection nut washer) LT connection nut tin /4 connection nut washer METRIS 250 Parts List TDC Proprietary and Confidential 10
11 30 LT Swivels LT x 1-1/4 M black swivel LT x 1-1/4M black, insulated swivel LT x 1-1/4M galvanized swivel LT x 1-1/4M galvanized, insulated swivel LT x 1-1/4M galvanized swivel with plug 30 LT Connection Nut LT black connection nut LT galvanized connection nut 30 LT Connection Nut Washer LT connection nut washer 30 LT Connection Nut Tin LT connection nut tin METRIS 250 Parts List TDC Proprietary and Confidential 11
12 Itron is a registered trademark of Itron, Inc Itron, Inc. All rights reserved Contact Itron, Inc., U.S., 970 Hwy. 127 North, Owenton, Kentucky USA Toll free: September 2016 METRIS 250 Parts List TDC Proprietary and Confidential 12
I-250 Meter Parts List
I-250 Meter Parts List This comprehensive catalog of diaphragm meter parts for Itron, Inc. contains parts for meters in current production. All parts information and descriptions in this document are believed
More informationDraft DIAPHRAGM METER PARTS CATALOG. Product Lines: METRIS, 400A, 675A, 800A, 1000A
DIAPHRAGM MER PARTS CATALOG Product Lines:,, 800A, Draft This is a comprehensive catalog of diaphragm meter parts for Itron, Inc. It contains parts used in current production. For information on part numbers,
More information(675A-1000A) Parts commonality with old style Sprague Easy Turn (ET) allows simple installation AMR compatible
Product Bulletin A15G Effective Date 5-2 A Series Meter 4A 675A, 8A, 1A (ET) Benefits Lowers handling and shipping costs Eliminates costs of duplicate inventory Reduces training time Improves safety Superior
More informationIn Accordance with COMAR and COMAR A(2) Diaphragm Meters - Aluminum Case
In Accordance with COMAR 20.55.05.02 and COMAR 20.25.01.04-1A(2) Diaphragm Meters - Aluminum Case Models: 80B AL-175 5B-225 250B AC-250 AL-250 AL-425 500B AL-600 AC-630 AL-800 AL-1000 AL-1400 AL-2300 AL-5000,
More informationAluminumcase Dry Test Meters DTM-200A and DTM-325 Repair Parts
A C E D RPL-7800. DTM-00A and DTM- Meters Aluminumcase Dry Test Meters DTM-00A and DTM- Repair Parts DTM-00A DTM- www.americanmeter.com AMC Quality System QMI is Accredited by: C R E D I T ISO 900 Certified
More informationElster RABO. Connected Industrial. Highly Accurate Rotary Gas Meter PRODUCT FEATURES. Applications. Brief information. Operating Principle
Connected Industrial Elster RABO Highly Accurate Rotary Gas Meter Applications Honeywell Elster has combined tried and tested product features of their RPM and IRM rotary meter product lines with new developments
More informationMelling Oil Pump Helical Asymmetrical Steel Gears Improved Efficiency, Performance, and Durability. Small Block Engines. Cars, Trucks & Vans
S H A R K T O O T H T E C H N O L O G Y GM Cars, Trucks & Vans 262-400 Small Block Engines Melling Oil Pump Helical Asymmetrical Steel Gears Improved Efficiency, Performance, and Durability Multi-patented
More informationParts List 8 AAT-60 and AAT-90 Auto-Adjust II Turbo-Meters
MP-1073C Rev. 3 Parts List 8 AAT-60 and AAT-90 Auto-Adjust II Turbo-Meters Parts List 8 AAT-60 and AAT-90 Auto-Adjust II Turbo-Meters Working Pressures: 175, 275, 720 & 1440 psig Copyright 2001 Invensys
More informationP1276 For Models: L1276, M1276, and NL1276 PARTS CATALOG. Marine Generators Marine Diesel Engines Land-Based Generators
P1276 For Models: L1276, M1276, and NL1276 PARTS CATALOG Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents
More informationAir Preparation Products. For Low Temperature Service. Parker Hannifin Corporation Pneumatic Division Richland, Michigan
Air Preparation Products For Low Temperature Service Catalog -E Miniature R Series R Regulators Miniature Miniature Regulators /8", /" Basic /8" Body R-C Non- R-MC Features Diaphragm operated for fast
More informationToll-free: 1 (844) MAGISTER
About Us.................................................... 2 Production................................................... 3 Quality Policy.................................................4 Quality Control................................................5
More informationTugger T-Bolts Coupling (Extension) Nuts Eye Bolts Metric Coupling (Ext.) Nuts Latch Swing Bolts Heavy Hex Nuts...
INDEX Threaded Rod... 4 T-Slot Nuts... 14 Driver Studs - Stainless Steel... 4 Stainless Steel T-Nuts... 14 Driver Studs... 4-5 Stainless Steel Flange Nuts... 15 Driver Studs Various Thread Lengths... 6
More informationB-34 Series Regulator Parts List. Effective June 2002
B-34 Series Regulator Parts List Effective June 2002 B-34N Reference Schematics B-34R Reference Schematics 2 Note: See Reference Schematics B-34 Series Service Regulators (Models N,R, M, D, IMN, IMR, IMRV,
More informationAuto-Adjust II Turbo-Meters
Sensus Metering Systems Auto-Adjust II Turbo-Meters " AAT-0 and " AAT-30 MP-03D R Parts List T H E G A S I N D U S T R Y 0 6 5 8 9 3 3 Pressue Tap All Working Pressures Body Assembly Components Main Body
More informationElster RABO. Connected Industrial. Highly Accurate Rotary Gas Meter FEATURES & BENEFITS. Applications. Brief information
Connected Industrial Elster RABO Highly Accurate Rotary Gas Meter Applications Honeywell Elster has combined tried and tested product features of their RPM and IRM rotary meter product lines with new developments
More informationJCB Engine Tier III Parts
GVF JCB Engine Tier III Parts 3033 Benzie Hwy. Benzonia, MI 49616 231-882-5921 Fax 231-882-5637 www.gillisons.com 800-392-6059 2 JCB TIER III ENGINE PARTS 1 MAIN INDEX TITLE PAGE NUMBER CHANGE NUMBER A
More informationFUNDAMENTAL PRINCIPLES OF ROTARY GAS METERS. by John Michalak Romet International, Inc.
FUNDAMENTAL PRINCIPLES OF ROTARY GAS METERS by John Michalak Romet International, Inc. INTRODUCTION Rotary gas meters have been in use for over sixty years in the natural gas distribution industry. Over
More informationSpray Pressure Control Manifold
Instruction Sheet P/N 0870G0 WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related documentation. Introduction The
More information155 CARTRIDGE SINGLE SEAL
MECHANICAL SEAL INSTALLATION INSTRUCTIONS 155 CARTRIDGE SINGLE SEAL SEAL INSTALLATION Preparation Determine if the pump is in good condition. A. Check the shaft or sleeve. 1. Remove all burrs and sharp
More informationCALIFORNIA Proposition 65 Warning:
PARTS MANUAL P1064 For Models: L1064D, L1064A, M1064D, M1064T1, M1064T2, M1064A, M1064H, NL1064D, NL1064T1, NL1064T2, NL1064H1, NL1064H2, M40C2, M55C2, & M65C2 CALIFORNIA Proposition 65 Warning: Diesel
More informationSpray Pressure Control Manifold
Instruction Sheet P/N 0870-0 WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related documentation. Introduction The
More informationFinding Top Center Position for No. 1 Piston. Set The Top Center Position By Temporary Marks On Type 1 Engines and 9RM Engines
Page 1 of 14 Finding Top Center Position for No. 1 Piston Set The Top Center Position By Temporary Marks On Type 1 Engines and 9RM Engines Various Fuel Injection Pumps may be equipped to the engine. Delphi
More informationWEAVER JACK CORP. MASTER PARTS PRICE & IDENTIFICATION LIST. (517) Fax (517) MINIMUM BILLING $20.00
EFFECTIVE JULY 1, 2014 WEAVER JACK CORP. MASTER PARTS PRICE & IDENTIFICATION LIST (517) 263-6500 Fax (517) 263-2810 MINIMUM BILLING $20.00 THIS PRICE LIST SUPERSEDES ALL PREVIOUS PARTS PRICE LISTS (Prices
More information711 URAI Roots. Quick Specs. Also Available in: Part Number
711 URAI Part Number 65121020 Detachable steel mounting feet Rigid one piece cast iron casing Connections in standard pipe sizes Straight, precision machined two lobe impellers Splash oil lubricated gears
More informationT-35/T-57 MARK II TURBO-METER GENERAL ASSEMBLY
MP-G-TBO-10-70B-0812-01-A 6" Model T-35/T-57 Mark II Turbo-Meter Parts List Working Pressures: 175, 275, 720, 1440 psi 12a 12 10 17 18 23 28 25 27 24 26 13 11 92 15 14 93 26a 29 32 76 44 43 8 9 83 84 79
More informationB42 Series Regulator Residential Regulator
B42 Series Regulator Residential Regulator The B42 is a spring loaded self-operated regulator with internal relief option. The B42 features a molded diaphragm, 6:1 lever ratio and one inch vent. The benefit
More informationINSTALLATION, OPERATION, MAINTENANCE & PARTS
OWNER'S MANUAL EXTREME ANGLE CARRIER INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural factors
More informationGTS, GTX and E-CLASS GAS TURBINE METERS SB
GTS, GTX and E-CLASS GAS TURINE METERS S 4510.4 An American Pioneer In Gas Measurement Accuracy, repeatability, rangeability and flow range make gas turbine meters the preferred choice in an increasing
More informationLube Level Maintainer
Lube Level Maintainer Models LM2000/LM2000S Installation Instructions 00-02-0423 Revised 08-12-09 Section 15 In order to consistently bring you the highest quality, full featured products, we reserve the
More informationWe recommend that when you need spare parts, you should use only original parts.
Tanco Auto wrap 1300 SPARE PARTS LIST We recommend that when you need spare parts, you should use only original parts. When ordering spare Parts use the following: - Drawings are marked with a position
More informationMueller Gas Products. Mueller Drilling and Stopping Machines. DH5 Drilling and Stopping. o 500 PSIG. o 1200 PSIG
Mueller Gas Products Distributed by: Mountain States Pipe and Supply Colorado Springs, Colorado 80903 1 800 777 7173 Mueller Drilling and Stopping Machines E5 Drilling and Stopping o 500 PSIG EH5 Drilling
More informationP.C. Priority Flow Control Valve Series J02D3. General Description
CV Catalog HY15-352/US General Description Needle Type, Compensated Regulator Valve. For additional information see Tips on pages 1-4. P.C. Priority Control Valve Series J2D3 Features Good adjustment from
More informationAluminum Conduit Bodies, Covers and Gaskets For Rigid Conduit & IMC.
NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/upgrades. Allows connection of straight conduit runs, branch
More informationMODIFICATIONS AVAILABLE - MADE TO ORDER - CONSULT OUR FACTORY. (MINIMUM ORDER MAY BE REQUIRED.)
NEEDLE VALVES - ANGLE & CROSS PATTERN Flow can be accurately controlled from full orifice opening to shut off. Fluid flow is readily visible through large sight window. Cross pattern can be used singularly
More informationKunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
More informationKunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
More informationREPAIR PARTS SNOW THROWER -- MODEL NUMBER PR5524ESNHL ( ) AUGER HOUSING / IMPELLER ASSEMBLY
REPAIR S SNOW THROWER -- MODEL NUMBER PRESNHL (9900700) AUGER HOUSING / IMPELLER ASSEMBLY 7 0 7 9 0 9 7 0 (EXPLODED) 9 0.07.00-B NOTE: All component dimensions given in U.S. inches. inch =. mm 0 REPAIR
More informationTable of Contents. Page. See Catalog and Product Updates on our Website
2 Table of Contents Page Sapphire Orifice Assemblies... 3-5 Metal Orifice Assemblies - Barb Connections... 6-7 Metal Orifice Assemblies - NPT Connections... 8-9 Metal Orifice Assemblies - Inserts... 10-13
More informationCOMPACT WHEEL LOADERS 7020, 7020BH Parts Catalog Ingersoll HOME TRACTORS ATTACHMENTS INDEX ENGINES GENERAL INFO. casecoltingersoll.
R Ingersoll COMPACT WHEEL LOADERS 7020, 7020BH Parts Catalog 8-3370 HOME TRACTORS ATTACHMENTS PAINT ENGINES GENERAL INFO PRODUCT IDENTIFICATION NUMBERS (PIN) AND SERIAL NUMBERS (S/N) TRACTOR MODEL AND
More informationManifold-Mounted to Flange-Mounted Solenoid Valve Conversion
Instruction Sheet P/N 106501A03 Manifold-Mounted to Flange-Mounted Solenoid Valve Conversion WARNING: Allow only personnel with appropriate training and experience to operate or service the equipment.
More informationSERIES BCZ2D NOZZLE CYLINDER START-UP AND INFORMATION SHEET
Model Number Definition SERIES BCZD NOZZLE CYLINDER START-UP AND INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with cylinder installation, setup and repair.
More informationPARTS MANUAL KA-3500PT PISTON TYPE PUMP INDEX
PARTS MANUAL KA-500PT PISTON TYPE PUMP INDEX - Parts Page Drawing page - Fluid End Detail page - Piston Assembly, Liner & Pony Rod Detail page - Water Manifold Assembly Detail page 5 - Oil Manifold Assembly
More informationSPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.
Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component
More informationP773-2 For Model: M773LW2 PARTS MANUAL. Marine Generators Marine Diesel Engines Land-Based Generators
P773-2 For Model: M773LW2 PARTS MANUAL Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to the
More informationX Dodge / Chrysler /2. Model 44 /216 Disconnect Front Axles for. W1500 and W2500 Ram
Dodge / Chrysler 1994-1998 1 /2 Model 44 /216 Disconnect Front Axles for W1500 and W2500 Ram 15 Exploded View 16 Parts Listing ITEM NO. PART NUMBER DESCRIPTION 1 (3) Housing Axle Service 2 (1) Drive Pinion
More informationSCC Inc. BRx Series. Technical Instructions. Document No. CPBK-2000 September 15, BR-AS Bracket Assemblies for use with SQM Actuators
SCC Inc. BRx Series BR-AS Bracket Assemblies for use with SQM Actuators Technical Instructions September 15, 2015 Description Features Application BRx series bracket assemblies installed with Cxx series
More informationInverted High Pressure Fluid Filters
Instruction Sheet P/N 33290-03 Description See Figure. Nordson high-pressure fluid filters prevent nozzle-plugging by filtering contaminants out of coating materials. These stainless steel, wall-mounted
More informationBeryllium Copper Finger Strip
provides excellent EMI protection when used as a gasket, due to its high electrical conductivity. This combined with its other main features of high tensile strength, fatigue resistance and its spring
More informationCHICAGO HARDWARE & FIXTURE COMPANY
CHICAGO HARDWARE & FIXTURE COMPANY Manufacturers of Wire Rope and Cha Fittgs, Industrial and Mare Hardware and Allied Products Sales offices and warehouse stocks are mataed the prcipal cities to enable
More information620 Mobile open circuit Piston pump service manual ADY074 ADY098
620 Mobile open circuit Piston pump service manual ADY074 ADY098 2 EATON 620 Mobile Open Circuit Piston Pump Service Manual E-PUPI-TS018-E2 November 2017 Table of Contents Contents SERVICE PARTS Parts
More informationGROB 4V-24 Parts. GrobBandSaw.com
GROB 4V- Parts GrobBandSaw.com 888-550-3116 18 19 20 21 22 5/16-18x1/2 Hex Head Cap Screw ( 14 ) 34 35 36 37 38 39 40 39 41 42 43 44 45 46 17 16 3/8-16x3/4 Hex Head Cap Screw ( 2 ) 31 30 15 5/16-18x1 Hex
More informationService Parts. John Deere 6068HFG08. Engine. Engine Models: Generator Models: 125/150REOZJ4 145/175REOZT4 TP /15
Service s Engine Engine Models: John Deere 6068HFG08 Generator Models: 125/150REOZJ4 145/175REOZT4 Table of Contents Subject Page Subject Page Introduction... 3 Group 42: DEF Line... 27 Numbering System
More information55-Gallon Powder Drum Truck
Instruction Sheet P/N 0 0 -Gallon Powder Drum Truck for Bulk-Feed Powder Transfer Systems Description See Figure. The -gallon powder drum truck automatically adds bulk powder to a powder coating system
More informationMarine Generators Marine Diesel Engines Land-Based Generators
P1066 For Models: L1066T, L1066A, L1066H, M1066T, M1066A1, M1066A2, M1066A3, M1066H, M1066TMCA, NL1066T, NL1066H1, NL1066H2, NL1066H3, NL1066H4, and M99C2 PARTS CATALOG Marine Generators Marine Diesel
More informationPARTS MANUAL THIS PAGE INTENTIONALLY LEFT BLANK. Ag-Bag International, Ltd. G7000 June Appendix A
The parts manual is organized into groups, it is designed to make the locating of parts easier. The exploded drawings also show assembly paths. All parts listed are available from your authorized Ag-Bag
More informationParts Manual Refer to inside cover for additional serial number information
Parts Manual Refer to inside cover for additional serial number information Second Edition First Printing (A2) April 2007 Part No. 31496 (from serial number 641 to 9999) Genie Industries has endeavored
More informationSection 10 Chapter 20
Section 10 Chapter 20 24 Valve, 8.3 Liter Engine Specifications Note: All coding used in the 8.3 Liter and 9 Liter engine manuals are Cuins engine codes. These engine codes have no meaning to New Holland
More informationLube Level Maintainer
Lube Level Maintainer Models LM500/LM500-TF Installation Instructions 00-02-0729 2015-05-30 Section 15 BEFORE INSTALLING THIS MURPHY PRODUCT: A visual inspection of this product for damage during shipping
More informationCALEFFI. Solar pump stations 01166/14 NA. 278 and 279 series 01264/16 NA
Solar pump stations 78 and 79 series 0/4 N CLEFFI 04/ N CCREDITED ISO 900 FM 4 ISO 900 No. 000 Function Solar pump stations are used on the primary circuit of solar thermal water heating systems to control
More informationFILTERED AIR SUPPLY FANS
BULLETIN 664-B September 2004 FILTERED AIR SUPPLY FANS Wall Mounted Roof Mounted Catalog Numbering System To identify a specific fan for ordering or engineering specification, it is necessary to show
More informationSection 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings
Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130
More informationWorld Pressure Filters. A New Standard in 7,000 psi Pressure Filters
World Pressure Filters A New Standard in 7, psi Pressure Filters 12 WPF Series Applications Together we can the environment. Preserve Minimize waste and promote energy efficiency. worldwide Achieve filtration
More informationPOST MIX DISPENSER RECTANGULAR DESIGN LOW PRESSURE FAUCET
SPARE PARTS CATALOG ENTERPRISES, INC. 706039: Model 872B 2LPF Post Mix Dispenser, Tall 706040: Model 872D 2LPF Post Mix Dispenser, Short POST MIX DISPENSER RECTANGULAR DESIGN LOW PRESSURE FAUCET 23-February-15
More informationP864 For Models: M864K, M864W, and M864W3 PARTS CATALOG. Marine Generators Marine Diesel Engines Land-Based Generators
P864 For Models: M864K, M864W, and M864W3 PARTS CATALOG Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents
More information255 Cartridge Dual Seal
MECHANICAL SEAL INSTALLATION INSTRUCTIONS 255 Cartridge Dual Seal Installation Instructions SEAL INSTALLATION Preparation Determine if the pump is in good condition. A. Check the shaft or sleeve. 1. Remove
More informationHeat treated and black oxide finish For use in hydraulic lifter applications with less than 400 lbs. open spring pressure and under 7500 rpm
PUSHRODS Small Block Chevrolet Swedged End Pushrods.080 Wall 1010 Steel Heat treated and black oxide finish For use in hydraulic lifter applications with less than 400 lbs. open spring pressure and under
More informationCaliper Disc Brakes. Description H-1. Technical Data and Selection Procedure H DP100 Caliper H-4. HC3 and HD3 Calipers H-7
Eaton Corporation Airflex Division 9919 Clinton Road Cleveland, Ohio 44144-1077 Caliper Disc Brakes H Phone (216) 281-2211 Fax: (216) 281-3890 Description H-1 Technical Data and Selection Procedure H-2
More informationP843NSATS For Models: NL843N2, NL843NW2, and NL843NW3 PARTS CATALOG. Marine Generators Marine Diesel Engines Land-Based Generators
P843NSATS For Models: NL843N2, NL843NW2, and NL843NW3 PARTS CATALOG Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its
More informationDELCO 20/22/25/27MT BREAKDOWN
DELCO 20/22/25/27MT BREAKDOWN J&N UNIT # JanNco # OE PART # LESTER # TYPE VOLT ROTATION TEETH 410-12027 25MT 12 CW 9 410-12028 410-12028R 1109264 6177 25MT 12 CW 10 410-12030R 20MT 12 CW 10 410-12031 410-12031R
More information9-43 3" 25.4 lbs. 3" 18" $ " 29.1 lbs. 4" 18" " 35.3 lbs. 5" 24" " 35.1 lbs. 6" 24"
Cast Aluminum Foot Valves Foot Valves have dresser type connection for use with O. D. tubing only. Complete assembly includes slotted strainer and safety ring and link for connection to suction tube. 9-13C...
More informationB42 Series Regulator. Advanced Metering and Regulation Technolgy at Work
B Series Regulator Advanced Metering and Regulation Technolgy at Work Features Interchangeable aluminum orifice 1. in of diaphragm area Molded deep convolution diaphragm with o-ring seal Plated steel diaphragm
More informationWorld Pressure Filters A New Standard in 7,000 psi Pressure Filters
World Pressure Filters A New Standard in 7, psi Pressure Filters 12 Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions.
More informationIngersoll HYDRAULIC VACUUM HVFB, HVFC, AHVFC, AHVFB PARTS CATALOG HOME ATTACHMENTS
R Ingersoll HYDRAULIC VACUUM HVFB, HVFC, AHVFC, AHVFB PARTS CATALOG 8-3082 HOME ATTACHMENTS ALPHABETICAL INDEX Bags...13 Boot...9 Cover, Bags...13 Cover, Cart...11 Decals...19 Ducts...9 Housing, Blower...9
More informationHEAVY DUTY WORM GEARBOX MODEL SBWG
FEATURES AND BENEFITS The SBWG model is suitable for use with Butterfly, Plug and any other type requiring quarter turn motion for thrust and torque applications High Tensile Aluminium bronze material
More informationPowers Controls No. 6 Pneumatic Damper Actuator
Document No. 152-013P25 Powers Controls No. 6 Pneumatic Damper Actuator OEM Literature Basic Actuator Typical Actuator with Clevis and Pin Actuator with Extended Shaft and Frame Mounting Accessories Description
More informationProduct Description. Junction Boxes...V1-V23 Meter and Instrument Enclosures...V24-V33
SECTION V INDEX Product Description Page Number Junction Boxes......................................V-V2 Meter and Instrument Enclosures.......................V24-V Control Centers.....................................V4-V9
More informationPilot Operated 2-Way Gas Valves
Pilot Operated 2-Way Gas Valves Model 2180ED - ductile iron Model 2180ES - cast steel Overview AMOT Model 2180 valves will shut off the fuel gas and vent the manifold when used on an internal combustion
More informationModel descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60
More informationBoxer 700HDX Parts Manual
BIG POWER IN ALL PLACES Phone: Sales - 800-831-0042, Parts and Service - 800-255-8839 www.boxerequipment.com Boxer 700HDX Parts Manual SN 5082 and Higher Part No. 76345-820 Manufactured by: Morbark, LLC.
More informationKJ Motor/Pump Assembly. Jetter. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
KJ-000 Motor/Pump Assembly NOTE: Order parts by Number Only. 0 0 0 Gasoline Engine, Hp Manual Start 0 Gasoline Engine, Hp Electric Start Decal, Warning 0 Decal, Fuel Warning Decal, Model. KJ-000 Key, /
More information4400 TwinHybrid Gas Seal
IS0 14001: 1996 and ISO 9001: 2001 CERTIFIED CHESTERTON FLUID SEALING DIVISION INSTALLATION INSTRUCTIONS 4400 TwinHybrid Gas Seal SEAL INSTALLATION Preparation Determine if the pump is in good condition.
More informationTECHNICAL DATA. Notes: For use with Trim Charts on Pages 227b - d
April 15, 2011 Deluge Trim 227a Order Deluge Valve Separately This Trim Chart is for use with the following Viking Trim Sets Valve Size Galvanized Trim Part No. Brass Trim Part No. 3 (DN80) 14631-1 14631-2
More informationSHAFT MOUNT & SCREW CONVEYOR REDUCERS. Cleveland
SHAFT MOUNT & SCREW CONVEYOR REDUCERS Cleveland SHAFT MOUNT & SCREW CONVEYOR REDUCER FEATURES Shaft Mount reducers available in sizes 2 Screw Conveyor reducers available in sizes 2 6 Suitable for AGMA
More informationMODEL I-900 SCRAPER INDEX
I-900 PARTS MANUAL Ashland Industries Inc. Hwy. 13 South P.O. Box 717 Ashland, WI. 54806 877-634-4622 Toll Free - phone 715-682-4622 phone 715-682-9717 fax www.ashlandind.com MODEL I-900 SCRAPER HOW TO
More informationTWIN ROTARY RAKE PARTS BOOK MODEL
TWIN ROTARY RAKE PARTS BOOK MODEL 2650 17.01135 This parts book is furnished for your convenience only. All parts must be purchased through an authorized dealer. Call us for a dealer near you. Issue Date:
More informationCT350 Circle Track Racing Engine ( ) Speci ications
CT350 Circle Track Racing Engine (19258602) Speci ications Specifications Part Number 88960547 Thank you for choosing Chevrolet Performance as your high performance source. Chevrolet Performance is committed
More informationAdjustable Port Valves for HOT or COLD AIR, GAS, OIL, WATER, STEAM
ADJUSTABLE PORT VALVES Bulletin 1008A December 2009 Adjustable Port Valves for HOT or COLD AIR, GAS, OIL, WATER, STEAM 3" Adjustable Port Gas Valve Beck Electric Operator 6" Adjustable Port Air Valve Honeywell
More information2014 Product Catalog.
www.wtechnologylink.com 2014 Product Catalog 19515 Oil Center Boulevard, Houston, TX, 77073 Phone: 281-209-9111 Toll Free Sales: 1-888-592-2996 (USA) Fax: 281-209-9191 Email: sales@wtechnologylink.com
More informationPrinted from MediaCat
Illustration A Crankcase, Crankshaft Illustration A Crankcase, Crankshaft Ref.Nr. Item code Quantity Description 1 1117 020 2106 1 Crankcase 2-9 2 9022 341 1050 4 Spline screw IS-M5x25 3 0000 988 5211
More informationBennett Pump Company
Bennett Pump Company SB-100 Meters Operation, Service & Parts Manual Only Trained Personnel May Work on This Equipment For more information, please contact: Jim Biesecker, Component Sales 1218 E. Pontaluna
More informationTechnical Data. Sizes 2 in. to 24 in. (DN50 to DN600) Approvals UL and ULC Listed FM Approved
Worldwide Contacts www.tyco-fire.com Model TJP Resilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator General Description TYCO Model TJP Resilient-Seated Gate Valves with Vertical and
More informationSection M Dry Pipe Systems
Section M Dry Pipe Systems TABLE OF CONTENTS Dry Pipe System (Model G)... M-1 Dry Pipe System (Model F)... M-2 Accelerators / Air Maintenance Devices... M-3 Accessories and Components... M-4 Notes 1. Refer
More informationC PRO MAC /84 to 02/91 IPL R1 Page 1 of 15 Tools And Accessories
11-400034C PRO MAC 390 06/84 to 02/91 IPL 218037-R1 Page 1 of 15 Tools And Accessories 11-400034C PRO MAC 390 06/84 to 02/91 IPL 218037-R1 Page 2 of 15 Tools And Accessories 214220 Scrench 93797 Wrench
More informationPrinted from MediaCat
Illustration A Crankcase Illustration A Crankcase Ref.Nr. Item code Quantity Description 1 1119 020 2118 1 Crankcase (1,3,5) 2-11 1 1119 020 2109 1 Crankcase (6,8,9) 2-11 1 1119 020 2119 1 Crankcase (2,4)
More information33 URAI DSL Roots. Quick Specs. Also Available in: Part Number T
33 URAI DSL Part Number T3037900 Detachable steel mounting feet Rigid one piece cast iron casing Connections in standard pipe sizes Straight, precision machined two lobe impellers Splash oil lubricated
More informationSpare parts list. Centrifugal pumps CP
Spare parts list Centrifugal pumps CP 000 www.cp.com CP 000 9800 0 0a CP 000 Contents Contents General information............................................................... Spare parts list....................................................................
More informationBoxer 600HD Parts Manual
Phone: Sales - 800-81-002, Parts and Service - 800-2-889 www.boxerequipment.com BIG POWER IN ALL PLACES Boxer 600HD Parts Manual SN 1 and Higher Part No. 76-821 Manufactured by: Morbark, LLC. 807 S. Winn
More informationNVE Rotary Vane Pumps & Packages
A.1.1 1 6 1 6 1 6 6 60 66 1 6 0 1 6 61 1 11 0 10 1 0 BORE - FRONT 1 1 6 D 0 0 1A 1 1 1 01 NVE 60 Challenger Fan Cooled Parts Diagram 1 00 6 1 0 10 BORE - REAR 6 0 National Vacuum Equipment North America
More informationSinclair Collins. Process Control Valves. For Steam, Hot and Cold Liquids -40 to 450 F up to 500 psi. Catalog SCV-100/USA April 2001
Sinclair Collins Process Control Valves For Steam, Hot and Cold Liquids -40 to 450 F up to 500 psi April 2001 The Diaphragm Operated Valves on the following pages are designed for directing, diverting
More informationB531 Series Regulator Twin Parallel Commercial Regulators
Gas B531 Series Regulator Twin Parallel Commercial Regulators Applications Use the B531 for light utility, industrial and commercial application. The twin parallel design should be used where a high degree
More information