MODIFICATIONS AVAILABLE - MADE TO ORDER - CONSULT OUR FACTORY. (MINIMUM ORDER MAY BE REQUIRED.)
|
|
|
- Claud Johnson
- 6 years ago
- Views:
Transcription
1 NEEDLE VALVES - ANGLE & CROSS PATTERN Flow can be accurately controlled from full orifice opening to shut off. Fluid flow is readily visible through large sight window. Cross pattern can be used singularly or installed in series. Pressure units supplied with non-vented sights. Gravity flow units supplied with vented sights. Vacuum application is available (requires modification) - Please specify.! Precision machined from aluminum bar stock! Maximum working pressure up to 125 PSI (861.9 kpa) to orifice CROSS PATTERN A [ORIFICE] INLET B C.69 Inches N N /8 F (17.53 mm) [.094 Inches] 1/8 F [2.39mm] N /4 T 1.38 (35.05) 3.38 (85.85) A [ORIFICE] INLET B N /8 F N N Inches (17.53mm) [.094 Inches] [2.39mm] 1/8 F 1/8 M 1/4 T N N /8 M 1/8 F 3.12 (79.25) 3.38 (85.85) MODIFICATIONS AVAILABLE - MADE TO ORDER - CONSULT OUR FACTORY. (MINIMUM ORDER MAY BE REQUIRED.) NEEDLE VALVES - ANGLE & CROSS PATTERN 5/07 BULLETIN F337
2 Designed for controlled multiple oiling from central location. Lubricant, (in reservoir of dispenser) individually metered at valve bank, travels to various points servicing hard to get at places, and eliminating individual oil cups. Easily disassembled for cleaning, individual valves remove without disturbing other components.!patented! Aluminum construction! Buna N Seals! Gage glass sight NEEDLE VALVE MANIFOLD! Pressure applications up to 125 PSI (861.9 kpa) non-vented.! Vacuum pressure available (requires modification) - Please specify. MODIFICATIONS AVAILABLE MADE TO ORDER - CONSULT OUR FACTORY VENTED SIGHT NON-VENTED SIGHT FEEDS L1 L2 NVM (53.09) 4.19 (106.43) NVM (53.09) 4.94 (125.48) NVM (72.14) 5.69 (144.53) NVM (72.14) 6.44 (163.58) NVM (91.19) 7.19 (182.63) NVM (110.24) 8.69 (220.73) LUBE DEVICES, INC NAGLE AVE., P.O. BOX 1810, MANITOWOC, WI PHONE: (920) FAX: (920) sales@lubedevices.com WEBSITE: NEEDLE VALVE MANIFOLD 9/03 BULLETIN F577-1
3 TOGGLE VALVES - LUBE DEVICES toggle valves are designed for controlled flow applications that require shutting off at times. This style of valve can be shut off and turned on again without affecting the previous preset drip rate. Fine adjustments can be made and easily locked by the knurled friction lock-ring. The drip rate is clearly visible through the large sight. Gravity feed valves are furnished with a vented sight chamber, provided by a split in the gasket above the sight glass. Valves for pressure applications have a solid gasket in both ends of the sight glass. (Non-vented)! Brass construction! Buna N seals For Toggle Adjustment - See Eng. Std. 103! Pressure version is rated for maximum working pressure applications up to 125 PSI (861.9 kpa)!.094 (2.39mm) minimum orifice A - 1/8 PTF FEMALE INLET N /8 MALE 3.81 (96.77mm) N /4 TUBE 4.00 (101.60mm) 1/8 NPTF MALE INLET N N /4 TUBE 4.00 (101.60mm) 1/4 NPTF MALE INLET N /4 TUBE 4.00 (101.60mm) TOGGLE VALVES - 3/04 BULLETIN F797-2 LUBE DEVICES, INC NAGLE AVE., P.O. BOX 1810, MANITOWOC, WI PHONE: (920) FAX: (920) sales@lubedevices.com WEBSITE:
4 LUBE-O-MATIC - SOLENOID WITH INTEGRAL SIGHT FEED The exclusive LUBE-O-MATIC features an integral solenoid/sight feed package which offers automatic fluid flow. The coil wires (normally closed valve) connect across the drive line or start switch allowing the unit to feed only when the machine is running. This package is price competitive with the cost of the solenoid alone. The knurled adjustment wheel provides positive, smooth feed rate adjustment from full-flow to shut-off. A large vented sight window is provided for easy viewing of the feed rate.! Class B molded water resistant coil! Needle valve is brass construction! All commercial voltages are available.! 11.5 watts power consumption for all units!.094 (2.39mm) minimum orifice! Gravity flow HOW TO ORDER: After catalog number, specify the voltage / Hertz required, separate with a dash (-). VOLTAGE: V/60Hz, 1Ph V/60Hz, 1Ph V/60Hz, 1Ph V, DC V, DC EXAMPLE: ESS V/60Hz, 1Ph. Solenoid voltage Series ESS102 (Angle pattern) MODIFICATIONS AVAILABLE MADE TO ORDER - CONSULT OUR FACTORY YOUR CHOICE OF TWO PATTERNS - ANGLE AND STRAIGHT STRAIGHT PATTERN CATALOG NUMBER A - CATALOG NUMBER A - ESS101 1/4 TUBE 3.19 (81.03) ESS102 1/4 MALE NPTF 3.19 (81.03) ESS103 1/8 MALE NPTF 3.00 (76.20) ESS151 1/8 MALE NPTF 2.50 (63.50) ESS152 1/4 MALE NPTF 2.56 (65.02) ESS155 1/4 TUBE 2.62 (66.55) LUBE-O-MATIC - SOLENOID WITH INTEGRAL SIGHT FEED 5/07 BULLETIN F987
5 NEEDLE VALVES - STRAIGHT PATTERN Sight pattern valves are ideally suited for vertical inline installation requiring controlled visible fluid metering. Knurled wheel provides for smooth, accurate adjustments of flow rate. Drip feed rate is adjustable from full orifice flow to complete shut-off. Flow is readily visible through large sight window. Pressure units supplied with non-vented sights. Gravity flow units supplied with vented sights. Vacuum application is available (requires modification) - Please specify.! Precision machined from brass bar stock.! Buna N seals.! Gage glass sight.! Maximum working pressure up to 125 PSI (861.9 kpa) to orifice MODIFICATIONS AVAILABLE-MADE TO ORDER-CONSULT OUR FACTORY. A - HEX [ORIFICE] B - INLET C - D E N /8 M 1/8 M 3.03 (76.96) N N Inches 1/4 M 1/4 M 3.41 (86.61) N (20.57 mm) [.094 Inches] 1/8 F 1/8 F 2.72 (69.09) N N [2.39 mm] 1/4 F 1/4 F 2.97 (75.44) 1.50 (38.10) N /4 M 1/4 T 3.44 (87.38) N Inches (23.88 mm) [.109 Inches] 3/8 M 3/8 M 3.56 (90.42) N [2.77 mm] 3/8 F 3/8 F 3.25 (82.55) N Inches (26.92 mm) [.152 Inches] 1/2 M 1/2 M 3.94 (100.08) N [3.86 mm] 1/2 F 1/2 F 4.62 (117.35) 1.75 (44.45) 1.75 (44.45) NEEDLE VALVES - STRAIGHT PATTERN 6/05 BULLETIN F307
SERIES G603 STANDARD FRONT MOUNT GAGE
LIQUID LEVEL GAGE -FRONT MOUNT, FLEXIBLE, CLEAR Economical, versatile and durably constructed. Available in mounting lengths to 600 inches (15240mm). Practical where oil level readings are necessary on
S P R AY E R VA L V E S AND C O N T ROL S C AT A L OG
Q UA L I T Y VA LV E S A N D C O N T R O L S. TO D AY A N D TO M O R R O W. Texas Industrial Remcor, Inc. CATALOG NO. 33 The new RC2 control system: Ensures no potential leaks in the tractor cab when using
Installation Components AirCare Air Preparation Systems
Care Preparation Systems Modular Line Filters 602104 602106 602108 * Transparent 602109 nylon liquid level indicator -18 lens. to 79 C Body Bowl Material icle Zinc Aluminum Zinc* Aluminum* Sintered Polypropylene
WDV-2 2-way normally closed poppet with air pilot. When valve closes a spring biased internal piston draws back a small volume on outlet side (approx.
PV-1 MPS-2P SPECIALTY COMPONENTS Miniature pulse valve, a normally open 3-way valve that closes shortly after being pressurized and remains closed until supply pressure is exhausted and repressurized.
50-01 (Full Internal Port) (Reduced Internal Port) Pressure Relief. & Pressure Sustaining Valve MODEL
50-01 650-01 & 1 Hytrol (Main ) 2 X42N-2 Strainer & Needle 3 CRL Control Accurate Pressure Control Optional Check Feature Fast Opening to Maintain Line Pressure Slow Closing to Prevents s Completely Automatic
Installation Components AirCare Air Preparation Systems
Modular Line Filters 602104 602106 602108 602109 250 psig / 17 bar Body Material icle Zinc Zinc* * Sintered Polypropylene 40µ 602104 Drain Type Port PTF ¹ ₄ 602106 Manual ³ ₈ A B C Dia. 5.27 / 1.34 0.75
Accessories Index. Air Starters. Accessories Index By Description Accessory IR Page Description Part # Number J 1 SRV125 SRV125T SRV100
Air Starters Accessories Index Accessories Index By Description Accessory IR Page Description Part # Number Relay Valves SRV100 SRV125 SRV125T SRV150 SRV150SS Relay Valve Tune Up Kit SRV150-TK3 J-3 J-4
Spray Nozzle. QuickJet and Systems/Components. Features and Benefits. Accessories
Efficient QuickJet and Systems are designed to save time in the cleaning and replacement of plugged or worn spray tips. Key feature overview for QuickJet Systems: Reduce maintenance downtime and costs
AIR PREPARATION PRODUCTS. Table of Contents
AIR PREPARATION PRODUCTS Table of Contents Page Air Filters................................................. 5-7 Oil Removal Filters......................................... 8-9 Regulators..............................................
C-5230 Pneumatic Signal Limiter
24-4221- 9, Rev. B Product Bulletin C-5230 Issue Date February 2016 C-5230 Pneumatic Signal Limiter Features Independently Adjustable High/Low Limits Integral Hypodermic Needle Test Points Field Chosen
EVP SERIES PROPORTIONAL CONTROL VALVES
EVP SERIES PROPORTIONAL CONTROL VALVES 207 Clippard is pleased to add the EVP series proportional control valve to our electronic product line. This product combines the features of the existing EV series
Solenoid Valves & Accessories. Cylinder Control Bases. Features. Performance Data. Materials
Valves & Accessories PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-057 Features l Controls cylinder extension and retraction l Allows rapid cylinder return l -Way Normally Closed l Quick Exhaust
Mini 1. Compact High Flow 3-Way and 4-Way Pneumatic Directional Control Valves
Catalog LX-530 Mini 1 Compact High Flow and Pneumatic Directional Control Valves FEATURES: 3-port or 5-port bodies Manual, Air Pilot, Solenoid or Mechanical Operators Two-position, Single or Dual Actuation
Quicklub Lubrication Systems
Fittings, Adapters and Accessories Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for
Sc h rader Bellows. CS Series Air Control Valves. 2 & 3-Way, Inline, Manifold & Stacking Direct Acting Solenoid Valves
Sc h rader Bellows 2 & 3-Way, Inline, Manifold & Stacking Direct cting Solenoid Valves INDEX PGE Features Inline Valves... 3 Stacking Valves... 4 Manifold Valves... 5 Valve Model Number System... 6 Solenoid
The TR-Series are large volume,
HYDROSTATIC TEST PUMPS Model TR-Series U p to 5.5GPM 5000PSI HYDRO INC. 3500 Arrowhead Drive Carson City Nevada 89706 web site: www.ricehydro.com e-mail: ricehydro@ricehydro.com Phone: (775) 885-1280 Fax:
Low Profile 3-Station Model
Low Profile 3-Station Model Low Profile 3-Station Model 106 Low Profile 3 Station Model MODELS USED ON 1 8700-16 Warmer Cover Plate 2 8572-18 Heating Element 100Watt/120V 3 7506-30 #8-32 x 3/8" Threaded
Flow Limit Safety Shutoff Valves Model 1
Flow Limit Safety Shutoff Valves Model 1 Model 1 Series flow limit safety shutoff valves automatically shutoff all flow from the cylinder when flow exceeds a factory preset level. The Model 1 is normally
Quicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2
Series 1, 2 & 6 Options selector. Port 4 = 1/8" NPT 5 = 1/4" NPT (Series 6* only) 7 = #10-32 UNF 8 = 1/4-28 UNF
KIP Isolation Valves Ideal for control of corrosive and aggressive media Elastomer diaphragm provides protection from aggressive, corrosive, and gritty media Isolation valves can be equipped with a low
ACCESSORIES FOR AIR VALVES & AIR SYSTEMS
ACCESSORIES FOR AIR VALVES & AIR SYSTEMS BULLETIN ACC-2000R AIR VALVES FOR INDUSTRY SINCE 1949 ISO 9001 CERTIFIED FOOT GUARDS Page 8 QUICK EXHAUST & ELECTRIC QUICK EXHAUST VALVES Pages 6 & 7 SHUTTLE VALVES
Quicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 10 and
Form No , 9 5, 6. Parts List for: X1A1 AIR DRIVEN WITH REMOTE CONTROL HYDRAULIC PUMP. Max. Capacity: 10,000 PSI
Form No. 101249 Parts List for: X1A1 AIR DRIVEN WITH REMOTE CONTROL HYDRAULIC PUMP Max. Capacity: 10,000 PSI Air Motor Assembly See sheet 3 of 6 13 12 1 11 10 8, 9 Basic Pump Assembly See sheet 4 of 6
Series: hydraulic-type control in pneumatic machinery
Adding Adding the the control, control, rigidity rigidity and and power power of of hydraulics hydraulics to to aa pneumatic pneumatic machine machine Control with Air-Oil Tanks Air-Oil tanks provide a
SV1217-SS SPRAY VALVE O P E R AT I N G M A N U A L
SV1217-SS SPRAY VALVE O P E R AT I N G M A N U A L I&J FISNAR INC. 2003 GENERAL DESCRIPTION The SV1217-SS spray valve is operated by air pressure, providing precise deposit control for low to medium viscosity
metering valves Metering Valves Index 1300 Series Series Series 8
Metering Valves Index 1300 Series 1 0 Series 300 Series HOKE Inc. PO Box Spartanburg, SC 9305- Phone () 57-79 Fax () 57-50 www.hoke.com Sales-hoke@circor.com metering valves Milli-Mite 1300 Series Forged
PARTS CATALOG MODEL FBD56X SERIES FROZEN BEVERAGE DISPENSERS (INCLUDES AFCTM PARTS)
FBD Partnership, LP P.O. BOX 897 SAN ANTONIO, TX 788 USA 0-67-800 FAX 0-67-8 www.fbdfrozen.com FBD TECHNICAL SUPPORT -866--777 TECHNICAL SUPPORT FAX -0-67-8 PARTS CATALOG ------------------------------
Form No Parts List for: RWP55 RWP55-4 MODEL C HYDRAULIC PUMP AIR DRIVEN WITH REMOTE CONTROL GENERAL ASS'Y SIDE VIEW SECTION A-A
Parts List for: Form No. 000339 RWP55 RWP55-4 MODEL C HYDRAULIC PUMP AIR DRIVEN WITH REMOTE CONTROL GENERAL ASS'Y SIDE VIEW 3 9, 0 4 5 6 6 5 4, 3 9,0 SPX Hydraulic Technologies, Rockford, IL 609 USA powerteam.com
RP-1350 Rev. 1. Parts List. Model 441-S Regulator. Parts List. Copyright 1999 Invensys Energy Metering
RP-1350 Rev. 1 Model 441-S Regulator Parts List Model 441-S Regulator Parts List Copyright 1999 Invensys Energy Metering DIAPHRAGM SIZE Nominal Inside Diameter A 7" Diaphragm 9 3 /4" 10" Diaphragm 13 1
MicroCoat System Operating Manual MC4000 Series MC785M, MC785M-WF Spray Valves
MicroCoat System Operating Manual MC Series MC785M, MC785M-WF Spray Valves A NORDSON COMPANY Introduction The MicroCoat System provides precise lubrication control for metal stamping operations. The MC
Mini Fire-Ball 225, 50:1
Mini Fire-Ball 225, 5:1 Features and Benefits Non-corrosive air motor design for long life Double-acting pump ensures smooth fl uid fl ow Robust grease inlet cage withstands the most abusive handling Typical
VFDAVV 1/2 VFDAVV VACUUM VALVES. DIMENSIONS (mm)
VACUUM VALVES VFDAVV VACUUM VALVES Direct acting vacuum valves 12VDC, 24VDC, 110VAC & 230VAC 1/4 & 1/2 Ports Full size high flow orifice 3-way Operation 2-way Operation (plug exhaust port using VFBP-U02)
PARTS CATALOG MODEL FBD352 DISPENSER
FBD Partnership, LP P.O. BOX 897 SAN ANTONIO, TX 788 USA 0-67-800 FAX 0-67-8 www.fbdfrozen.com FBD TECHNICAL SUPPORT -866--777 TECHNICAL SUPPORT FAX -0-67-8 PARTS CATALOG ------------------------------
CONNECTION INTO INTERNAL THREADED AND SHAPED ELEMENTS
CONNECTION INTO INTERNAL THREADED AND SHAPED ELEMENTS Series IG (manual version) - Quick connector for female threads and shaped elements - Working pressure: from 0 up to 350 bar IG-18-14 66 30 19 1/4"G
For more Parts Information:
For more Parts Information: https://manitowocfsg.sysonline.com/default.aspx TABLE OF CONTENTS Manitowoc Foodservice [Updated: Sep. 30, 2013] Manitowoc - Ice & Related Parts Catalog Ice Machine S Series
Control Valves/Meters Grease
Grease 740 WARNING Lincoln Control Valves, Meters and Accessories Provide the Durability and Precision You Need for Your Lubrication Systems. Whip Hoses Models 3029, 3034, 5812, 5818, 5861, 81725, 81726,
Section E Fine Spray Nozzles
Section E Fine Spray s Overview Our fine spray hydraulic atomizing nozzles are available in two styles. Standard s: Traditional threaded nozzles made of metal. Quick-Connect s: Consisting of a nozzle body
BRASS BALL VALVES. CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0.
195 Series Ball Valves BRASS BALL VALVES CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0. Hot forged brass body Blow-out nickel plated
3. Fuel System FUEL SYSTEM FUEL INJECTION (FUEL SYSTEM) A: GENERAL. FU(STi)-7
W1860BE.book Page 7 Tuesday, January 28, 2003 11:01 PM 3. Fuel System A: GENERAL The fuel pressurized by the fuel tank inside pump is delivered to each fuel injector by way of the fuel pipe and fuel filter.
Introduction. Installation. Maintenance. Bill of Materials
Table of Contents Introduction Specitications... 3 Operation... 4 Installation New Installations... 6 Retrofit Installations... 6 Flow Control Switch... 7 Dimensions... 8 E-7 Valve... 28 E-7 Valve with
RAZOR. RAZOR HVLP Spray Guns
RAZOR RAZOR HVLP Spray Guns Provides generous material flow that helps you get the job done quickly Offers exceptional atomization rate Promotes a superior finish Proven effective for clear coat, base
www.cmadishmachines.com Table of Contents CMA-44 1. PARTS MANUAL... 4 1.1. Initial Parts Kit (P/N 13996.81)... 4 1.2. Initial Parts Kit (P/N 13996.80)... 5 1.3. Exploded View Drawings... 6 1.3.1. Cabinet
www.cmadishmachines.com Table of Contents CMA-66 1. PARTS MANUAL... 4 1.1. Initial Parts Kit (P/N 13996.81)... 4 1.2. Initial Parts Kit (P/N 13996.80)... 5 1.3. Exploded View Drawings... 6 1.3.1. Cabinet
For more Parts Information:
For more Parts Information: https://manitowocfsg.sysonline.com/default.aspx TABLE OF CONTENTS Manitowoc Foodservice [Updated: Sep. 30, 2013] Manitowoc - Ice & Related Parts Catalog Ice Machine S Series
Neoprene. Steel or Brass
The low air inclusion product line is designed for air conditioning, refrigerant, gaseous and fluid transfer applications. Product Features connections for versatility of installation on tubing or hose
INSTALLATION INSTRUCTIONS FOR MODEL H00984
INSTALLATION INSTRUCTIONS FOR MODEL H00984 IMPORTANT: REVIEW ALL INSTRUCTIONS, PARTS LISTS, & INSTALLATION DIAGRAMS BEFORE STARTING INSTALLATION HORN ASSEMBLY 1. Follow steps 1-5 for both horns. For best
Colorflow and Ball Valves. Industrial Flow Control, Check, Gauge Control. Catalog HY /US
Colorflow and Industrial Flow Control, Check, Gauge Control Catalog HY14-3300/US Colorflow and Fully guided poppets are used on Colorflow valves rather than the less durable ball-check type construction.
Nylon Fluid Regulators
Instruction Sheet P/N 08880B Introduction The FR- and RA- nylon fluid regulators are patented, electrically non-conductive, air-operated, pressure regulators. Except for the body shape and fluid connection
CVH103P. Check Valve Series CVH103P. Technical Information. General Description
Catalog HY-351/US Information Cartridge Style Valve. For additional information see Tips on pages 1-4. Valve Series H13P Spherical poppet for low leakage D -Ring eliminates back-up rings Dual sense paths
2 YEAR WARRANTY HOSE REELS. reelmaster Series heavy duty, quality hose reel engineered to save space
STANDARD CAPacity 1400 Series 1400 Series heavy duty, quality hose reel engineered to save space 1400 Series* Holds up to 40 of 1/2 Hose For 1/4, and 1/2 I.D. Hose Swivel inlet: 1/2 NPSM Low pressure 1/2
PARTS LIST PONY 20 SCA
PARTS LIST PONY 20 SCA WIRING DIAGRAM PART NO. PART DESCRIPTION 4990601 GEARMOTOR - 120 VOLT 4990581 GEARMOTOR - 240 VOLT 4890391 VAC MOTOR - 115 VOLT 4891251 VAC MOTOR - 240 VOLT 4991321 BRUSH MOTOR -
EAGLE SERIES VALVES E3 AND E4 SERIES. A Solenoid coil is available in AC or. B Manual override plunger provides. C Valve body is tapped #10-32 and may
EAGLE SERIES VALVES E3 AND E SERIES A A Solenoid coil is available in AC or DC with LED and plug-in connector or wire leads. B Manual plunger provides valve actuation with no electrical power. B C Valve
Port Flow Rate/ Function Series Actuators Page Number Size Factor
Section dex Port Flow Rate/ Function Series Actuators Page Number Size Factor 0- Cv = 0.05 Way Modular Solenoid. -. & to Way Manifold /8 NPT Cv = 0. Way, Position Modular /8 NPT Cv = 0.05 Way Hex Solenoid.5.6
KJ Main Components - 120V 60Hz. Jetter. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Jetter KJ-0 Main Components - 0V 0Hz 0 0 NOTE: Order parts by Catalog Number only. Decal, Potable Water 0 Decal, Model Number Decal, Warning Motor Shroud 0 Hand Grip Handle Cord Wrap Pan Head Screw, #
HOSES. nozzle BRASS QUICK SEWER NOZZLE TAPE WASHER HIGH PRESSURE HOSE TOOLS TURBO HIGHER PSI RATING. o rings WASH SOAP CHISELING FLUSHING BLASTING
PRESSURE WASHER CENTER CATALOG BRASS QUICK coupling HIGH PRESSURE HOSE o rings TAPE HOSES HIGHER PSI RATING WASHER TURBO nozzle TOOLS for the trade SEWER NOZZLE WASH SOAP CHISELING FLUSHING BLASTING brass
Check Valves Product Specs and Ordering SINGLE BALL STEEL CHECK VALVES. Specifications. Operation. Features
SINGLE BALL STEEL CHECK VALVES Single Ball Steel Check Valves are designed for use in hydraulic or lubrication systems with pressures up to 5,000 PSI. Available in two models for use as inlet or outlet
SOLUTIONS. Airless Spray System. In This Issue: Airless Spray System pg. 2. Improved FlowMaster pg. 5
THE LATEST PRODUCTS AND NEWS FOR LINCOLN CUSTOMERS SOLUTIONS DECEMBER 2002 VOL. 4, NO. 1 Airless Spray System In This Issue: Airless Spray System pg. 2 Improved FlowMaster pg. 5 MC 2 Progressive High Pressure
For more Parts Information:
For more Parts Information: https://manitowocfsg.sysonline.com/default.aspx TABLE OF CONTENTS Manitowoc Foodservice [Updated: Sep. 30, 2013] Manitowoc - Ice & Related Parts Catalog Ice Machine S Series
VACUUM FILTRATION
VACUUM FILTRATION Introduction Glass Microfiltration: Support Systems mm Glass Microanalysis Holders mm Glass Microanalysis Holders 7 mm Glass Microanalysis Holders 7 mm Glass: All-Teflon seal 7 mm Glass:
Prodigy HDLV System Troubleshooting - Generation III
Prodigy HDLV System Troubleshooting - Generation III Instruction Sheet P/N 1081071-05 Use the procedures listed in this document to isolate and correct common problems with Prodigy HDLV Systems. Refer
500 Series Adjustable Popoff & Inline Relief Valves.5 to 150 PSIG
Fred C. Gilbert Co. 106 Norris Road Bakersfield, Ca. 93308 661-399-9569 fax 661-393-9654 Adjustable Popoff & Inline Relief Valves.5 to 150 PSIG Features Popoff or Inline Valves Adjustable Crack Pressure
Screwed Bonnet Needle Valves. Needle Valves
89 Design & Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.172 to.438 in. Flow Coefficients (Cv) from.37 to 2.7 Straight or angle flow patterns Optional panel mount Handle options available
Pneumatic Power Valves Series 75/76 Manual, Mechanical, Pneumatic and Electric Valves
Quic-Pics Catalogue Pneumatic Power Valves Series 75/76 Manual, Mechanical, Pneumatic and Electric Valves Contents: Product Line Overviews 2 Manually Operated Valves 5 Pushbuttons 6 Toggle Switch 8 Knob
MODEL CMA-44 PARTS MANUAL Rev 2.13
MODEL CMA-44 PARTS MANUAL Rev 2.13 CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-895-2141 www.cmadishmachines.com Table of Contents CMA-44 1. PARTS MANUAL... 4
DISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG BUNN-O-MATIC CORPORATION
8 4 0 0 1 BUNN Espress ES 2C DISCONTINUED VERSION Parts listed in this catalog may no longer be available. 12 0,5 1,5 CL 2 16 2,5 CAUTION HOT Liquid-Steam-Surfaces OFF ON ILLUSTRATED PARTS CATALOG Designs,
Rev.2.06A www.cmadishmachines.com Table of Contents EST-44 1. PARTS MANUAL... 3 1.1. Initial Parts Kit... 3 1.2. Exploded View Drawings... 4 1.2.1. Cabinet Assembly... 4 1.2.2. Control Box Assembly (3
Accessories. Section Outline
Fisher Controls offers a line of accessories including filters, needle valves, pressure gauges, vent assemblies, and emergency shutoff valves. This section provides technical information for these accessories.
Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI
Catalog HY15-351/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI PRESSURE RELIEVING AP1B2YP... 2G... Increase /Increase Current...5.3/1.4... 35/5... 7-8 AP2A2... C8-2... Increase
Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI
Catalog HY15-352/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI PRESSURE RELIEVING AP1B2YP... 2G... Increase /Increase Current...5.3/1.4... 35/5... 7-8 AP2B2YP... C8-2...
Valves, Fittings, and Manifolds Catalog. We make things MOVE
Valves, Fittings, and Manifolds Catalog We make things MOVE We Make Things Move A forward-thinking innovator, Bimba provides industry-leading pneumatic, hydraulic and electric motion solutions that are
CUP ACCESSORIES SECTION 4 FLOW VALVES, CHECK VALVES, MECHANICAL VALVES, SWIVEL JOINTS, & TEE ADAPTORS EDCO USA.
CUP ACCESSORIES SECTION FLOW ALES, CHECK ALES, MECHANICAL ALES, SWIEL JOINTS, & TEE ADAPTORS 0 EDCO USA. www.edcousa.net : CUP ACCESSORIES CONTENTS DUAL FLOW ALE TRI-FLOW ALE FLOW SENSOR ALE RELEASE CHECK
Highly Engineered, Quality Locomotive Products. Ingenuity in Motion
Highly Engineered, Quality Locomotive Products Ingenuity in Motion World Class Manufacturing WABCO Locomotive Products designs and manufactures highly engineered pneumatic components and related products.
Installation Suggestions
Installation Suggestions P/N 52200-98 Suggestions For Installing The Balboa 05-28-14 Introduction The Balboa consists of a controller that opens and closes valves that supply water to four groups of jets.
Introduction to Inline Lubrication. Master Pneumatic
Introduction to Inline Lubrication Master Pneumatic What is the purpose of Inline Lubrication? Sentry Introduce atomized oil into the compressed air line to lubricate: Air Motors Cylinders Gears Sliding
BATTERY WASH CABINETS, WASH STATIONS, RECIRCULATION/NEUTRALIZATION SYSTEM
BATTERY WASH CABINETS, WASH STATIONS, RECIRCULATION/NEUTRALIZATION SYSTEM Complete Product Line A cost-effective solution for extending the life of batteries and reducing lift truck electrical problems
V46 Series Pressure-Actuated Water-Regulating Valves
FANs 1, 11 Product/Technical Bulletin V46 Issue Date 9 V46 Series Pressure-Actuated Water-Regulating Valves The V46 pressure-actuated modulating valves come in two types of control action: direct acting
PRICE SCHEDULE. Complete Systems Components Accessories DIVISION OF RICE LAKE WEIGHING SYS-
Complete Systems Components Accessories DIVISION OF RICE LAKE WEIGHING SYS- 230 West Coleman Street P.O. Box 272 Rice Lake, Wisconsin 54868-0277 USA TEL: 715-234-1617 FAX: 715-236-7032 WEB SITE: www.mattsonspray.com
Control Valves & Valve Accessories
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 400 Phone 76-559-077 Fax 76-559-0547 Stainless Steel 0- Fully Ported valve with M5 threads available- contact factory Viton is a registered trademark
High Pressure Equipment High Pressure Valves, Fittings and Tubing
igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle
TECHNICAL INSTRUCTIONS
TECHNICAL INSTRUCTIONS 24 Month Maintenance Kit Instructions For Benchmark 2500-3000 Boilers Maintenance Kit # 58025-10 Flame Detector P/N 66034 Ignitor- Injector P/N 58023 Exhaust Manifold Seal P/N 84040
Goulds Small Capacity Double Suction Pump
Goulds 3410 Small Capacity Double Suction Pump 3410 Double Suction Pumps Designed for a Wide Range of Industrial, Municipal, Capacities to 7,000 GPM (1591 m3/h) Heads to 550 feet (168 m) Temperatures to
Centro-Matic. Automated Lubrication Systems
Centro-Matic Automated Lubrication Systems I install Lincoln Centro-Matic systems with confidence because I know they re going to prolong the life of my customer s critical machinery. Les Maness, Installation
2668CE CHI CHI CE CE CHI CHI VE VGHI44
WOB-L 2668/2688 SERIES MODELS models 2668CE22 2668CE44 2668CHI22 2668CHI44 2688CE22 2688CE44 2688CHI22 2688CHI44 2688VE44 2688VGHI44 Other models based on availability and minimum purchase. 2668CE32 2668CE40
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)
PRESSURE REDUCING VALVE
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Closes quickly when downstream pressure exceeds reduced pressure setpoint 3 PRESSURE REDUCING VALVE with SURGE
Control Valves/Meters Grease
Grease 740 WARNING Whip Hoses Models 3029, 3034, 5812, 5818, 5861, 81725, 81726, 81795 Install as shown. Swivels Volume High-Pressure Swivels Model Description Thread Size 81728 Straight 1 /2" NPT(m) x
Gearbox Tools & Accessories
Gearbox Tools & Accessories Reliability Centered Maintenance SYSTEMS LIMITED MISERTM Fluid Handling Products JLM Systems offers a unique line of OILMISER Gearbox Breathers and Accessories All OILMISER
Control valves, meters and accessories
Control valves, meters and accessories Control valves....................................... 48 Grease.......................................... 48 Fluid lubricants....................................
SPECIFICATIONS. Installation arrow must point downward Vertical Valve For top mounting.
PNEUMATIC FLOAT VALVE DESCRIPTION The Magnetic is an air sensor for detecting liquid level inside a vessel. The float mechanism mounted within the vessel operates a ceramic coated magnet. As the float
CLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
Genesis Series Valves Parts List / Service Instructions
Genesis Series Valves Parts List / Service Instructions INDEX PAGE General Warnings and Cautions......................................................... 2 Model Number Index...................................................................
CLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
Low Flow Air Atomizing
XA Low Flow Air Atomizing TO DER: specify pipe size, body style, spray set-up #, hardware and mounting assemblies, and material. See page 84. 82 The XA nozzle system uses the energy in compressed air to
Technology. The OILMISER Vapor Guard
The OILMISER Vapor Guard An air breather is used to vent the enclosed air space on the Drive End and Non-Drive End bearings on a Boiler Feed Pump. Increasing heat and thermal expansion, cause inside oil
3 Way/2 Position Valves
Way/ Position Valves Three way valves have three pipe connections and two orifices. When one orifice is open, the other is closed, and vice versa. They are commonly used to alternately apply pressure to
SERVICE INSTRUCTIONS. Material Pump
TM TM SERVICE INSTRUCTIONS Material Pump 9618 DESCRIPTION Model 9618 is designed for pumping petroleum products from the original container to a desired location. Due to its non-corrosive (aluminum and
Kuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
MINIATURE SOLENOID GENERAL SERVICE VALVES
MINIATURE SOLENOID GENERAL SERVICE VALVES SERIES The Series solenoid valves are designed for use with air and inert gases Highly customizable construction that is suitable for a wide variety of gas applications
Pressure Control Valves Series R. General Description. Specifications. Flow Data
Catalog Y14-2502/US Technical Information Series R General Description Series R direct relief valves limit system pressure by opening to tank when system pressure reaches the valve setting. Specifications