Draft DIAPHRAGM METER PARTS CATALOG. Product Lines: METRIS, 400A, 675A, 800A, 1000A
|
|
- Holly Johnson
- 6 years ago
- Views:
Transcription
1 DIAPHRAGM MER PARTS CATALOG Product Lines:,, 800A, Draft This is a comprehensive catalog of diaphragm meter parts for Itron, Inc. It contains parts used in current production. For information on part numbers, descriptions or assemblies in previous models of Sprague, Schlumberger or Actaris meters, please call customer service at Price list effective March 10 th, All information and descriptions of parts in this document are believed to be accurate, but are not guaranteed. All prices are in USD and are subject to change without notice. All taxes extra. FOB Owenton, KY. Minimum order $100.
2 s Catalog Index of Diaphragm s B Badges 5 Brackets Center Bracket Assembly 6 Diaphragm Bracket 7 C Castings Center.3 Side Cover.3 Top..3 Top Assemblies.3 Carrier Wire Assembly...7 Ceiling Plate...6 Center Modules.9 Connection Nut..7 Connection Washer...7 D Diaphragm Assembly...6 Drive Dogs.5 E Extension Plate.6 F Flag Arm Link 9 G Gaskets Case...3 Diaphragm. 3 Top..3 Gear Shaft-Helical Worm..9 H Handhole Cover 4 I IDM Assembly...4 Indexes...4 Index Boxes...4 Index Mounting Bracket 3 M Main Shaft Assembly 7 O O-Ring Handhole Cover..3 Outlet Seal...9 R Retaining Clip 9 S Screw List..8 Seal Cup....7 Caps...7 T Assemblies.6 Tangent Crank...7 Top Assemblies.3 V Valve Covers.5 Valve Cover Guides...9 Valve Seats 6-2 -
3 s Catalog Top Assembly (Top Casting, IDM, Hubs) Description C to C #1 Sprague Standard Castings 30LT LT LT Description 1-1/4 (1" Pittsburgh) SF RM Top with IDM Lower Case Center Casting #4 Sprague Standard (ft³) #4 Sprague Standard (ft³) 6-25/ / Side Cover Center Casting Side Cover LT (ft³) 6-25/ LT (ft³) 8-1/ LT (ft³) 6-25/ Gaskets and O-Rings 30LT (ft³) 8-1/ LT (ft³) 6-25/ Description 45LT (ft³) 8-1/ Case Gasket A #4 Sprague Standard (ft³) ,, Handhole O-Ring A 30LT (ft³) A 45LT (ft³) #5 Sprague Standard (ft³) LT (ft³) LT (ft³) LT (ft³) LT (ft³) Top #5 Sprague Standard (ft³) A Top 30LT (ft³) Top 45LT (ft³) Side Cover Gasket Diaphragm O-Ring Top Gasket Top Gasket Index Mounting Bracket Assembly Description Index mounting bracket Index Screws for Indexes # and # Top 100LT (ft³) Index Screws for Indexes # #
4 s Catalog IDM Assembly Description Indexes Description Type, IDM Assembly IDM for Standard Top (ft³) IDM for Top (ft³) & & 2 PSI Compensating, 4 Circle, ft 3 5 PSI Compensating, 4, ft & 4 1/2'2' (ft 3 ) N IDM for Standard Top (m³) IDM Screws Male Drive Dog Seal Unit & 4 1/2'2' (ft 3 ) & 4 Digit Direct Read (ft 3 ) N & 4 Digit Direct Read (ft 3 ) & 5 Digit Direct Read (ft 3 ) N & 5 Digit Direct Read (ft 3 ) & 5 Digit Direct Read (m 3 ) N & 5 Digit Direct Read (m 3 ) Index Boxes Description & & Handhole Cover,, Index Box with Boss and RTV Index Box with Ports and RTV Index Box with RTV (Not Pictured) Description Handhole Cover , 10 (ft 3 ) N , 10 (ft 3 ) Digit Direct Read (ft 3 ) N Digit Direct Read (ft 3 ) Digit Direct Read (m 3 ) N Digit Direct Read (m 3 ) Digit Direct Read (m3) N Digit Direct Read (m3) Compensating 5 Circle Dial 2 PSIG Compensating 5 5 PSIG Compensating 5 10 PSIG Compensating PSIG Compensating PSIG Compensating
5 s Catalog Badges (Badges cont.) Description Type 5 PSIG (Standard) 5 PSIG (Standard) N (ft³) (ft³) PSIG N (ft³) PSIG (ft³) PSIG (m³) PSIG N (ft³) PSIG (Standard) N (ft³) Description Type & & &,, 25 PSIG 25 PSIG 25 PSIG Blank Aluminum Badge (ft³) N (m³) (m³) PSIG (Standard) 25 PSIG (HP) (ft³) N (ft³) Drive Dog 25 PSIG (HP) (ft³) PSIG N (m³) PSIG (m³) PSIG m 3 (HP) N (m³) Description, Male Male A & 675A 675A 25 PSIG N (ft³) A & 675A 675A 25 PSIG (ft³) Valve Covers 675A & 675A 675A & 675A 800A 800A 800A 675A 25 PSIG 675A 25 PSIG 800A 25 PSIG 800A 25 PSIG 800A 25 PSIG N (m³) (m³) N (ft³) (ft³) N (m³) Description Valve Cover, Rear (Lapped) Valve Cover, Front (Lapped) Valve Cover (Lapped) Also Order: Valve Cover Bearing p/n A 800A 25 PSIG (m³) A & 800A Valve Cover 675A & 800A (Lapped) & 25 PSIG N (ft³) Valve Cover (Lapped)
6 s Catalog Valve Seat Assembly Description Valve Seat A & 800A Valve Seat (with Bearing) Description Type Units Valve Seat (with Bearing) Assembly N ft Assembly ft Ceiling Plate Assembly - Reverse Stop N m Assembly N m Description Assembly m Ceiling Plate Adjustment Assembly N ft 3 & m Ceiling Plate Adjustment Assembly N ft 3 & m Extension Plate Adjustment Assembly ft 3 & m Adjustment Assembly ft 3 & m Description Extension Plate Center Bracket Assembly Diaphragm Assembly Description Center Bracket Description Also Order: Center Bracket Bearing Diaphragm Assembly Also order: Hex Nut p/n (2) Diaphragm Assembly Also order: Hex Nut p/n (2) Boot Seal Center Bracket Assembly
7 s Catalog Main Shaft Assembly Description Main Shaft Also Order: Thrust Bearing Main Shaft Assembly (N) Tangent Crank Main Shaft Assembly () A & 800A Description Tangent Crank Tangent Crank Diaphragm Bracket Description Diaphragm Bracket Also order: E-Clip p/n Diaphragm Bracket Also order: E-Clip p/n Seal Cup,, Description Seal Cup Location Handhole Cover and Index Carrier Wire Assembly Cup Case Cup Case Description Carrier Wire Bracket Assembly Also order: Wire Screw p/n Carrier Wire Bracket Assembly Also order: Wire Screw p/n (2)
8 s Catalog Handhole Cover Screws Case Screws Index Box Screw Index Mounting Screw Screws Description Location Quantity,,,, 10-24X1/2 Slotted Pan Head Handhole Cover Rivet 1/8 x Badge /4-20X3/4 Hex Head Case , 10-24X5/8 Fil Head Screw SlotD Index Box , 10-24X3/8 Fil Head Index Mounting Screw Index Valve Seat Screw Top Case /4-20X3/4 Hex Head Top Case /4-20X5/8 Wash Face Side Cover ¼-20x5/8 Soc Head Cap Screw Valve Seat Screw /16-18X3/4 Hex Head Top Case /16-18x1 RD Head Screw Side Cover x7/16 Wash Head SLF TP IDM Screw /4-20X1/2 Hex Head Slotted Index Box Screw X3/8 Fill Head 6-32X1 TRI RNDLR Taptite 1/4-20X1/2 Hex Head Slotted 1/4-20X.375 FIL Head Index Mounting Bracket Index Mounting Screw for Indexes # # Index Bracket Screw for Standard and Top Index Bracket Screw for Itron Adapter Plate
9 s Catalog Cap Description Location Valve Cover Guides,, Cap Handhole Cover and Index Description Valve Cover Guides Cap Case Cap Case Gear Shaft, Helical Worm Description Center Modules Gear Shaft, Helical Worm Gear Shaft, Helical Worm Metric Description Module N ft NEW Module ft NEW Module N m NEW Module N m 3 - Reverse Stop NEW Retaining Clip Description Retaining Clip Flag Arm Link Module Module m NEW Outlet Seal Description Description Outlet Seal Flag Arm Link Itron, Inc 970 Highway 127 North Owenton, KY Tel: Fax: Price list effective March 10, All information and descriptions of parts in this document are believed to be accurate, but are not guaranteed. All prices are in USD and are subject to change without notice. All taxes extra. FOB Owenton, KY. Minimum order $
METRIS 250 Meter Parts List
METRIS 250 Meter Parts List This is a comprehensive catalog of the METRIS meter parts for Itron, Inc. It contains parts used in current production. All parts information and descriptions in this document
More informationI-250 Meter Parts List
I-250 Meter Parts List This comprehensive catalog of diaphragm meter parts for Itron, Inc. contains parts for meters in current production. All parts information and descriptions in this document are believed
More informationAluminumcase Dry Test Meters DTM-200A and DTM-325 Repair Parts
A C E D RPL-7800. DTM-00A and DTM- Meters Aluminumcase Dry Test Meters DTM-00A and DTM- Repair Parts DTM-00A DTM- www.americanmeter.com AMC Quality System QMI is Accredited by: C R E D I T ISO 900 Certified
More information(675A-1000A) Parts commonality with old style Sprague Easy Turn (ET) allows simple installation AMR compatible
Product Bulletin A15G Effective Date 5-2 A Series Meter 4A 675A, 8A, 1A (ET) Benefits Lowers handling and shipping costs Eliminates costs of duplicate inventory Reduces training time Improves safety Superior
More informationParts List 8 AAT-60 and AAT-90 Auto-Adjust II Turbo-Meters
MP-1073C Rev. 3 Parts List 8 AAT-60 and AAT-90 Auto-Adjust II Turbo-Meters Parts List 8 AAT-60 and AAT-90 Auto-Adjust II Turbo-Meters Working Pressures: 175, 275, 720 & 1440 psig Copyright 2001 Invensys
More informationB-34 Series Regulator Parts List. Effective June 2002
B-34 Series Regulator Parts List Effective June 2002 B-34N Reference Schematics B-34R Reference Schematics 2 Note: See Reference Schematics B-34 Series Service Regulators (Models N,R, M, D, IMN, IMR, IMRV,
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS MODEL D300 SERIES MIXERS (INCLUDES MOTOR PARTS) ML-134258 ML-134261 D300T (Timed) D300C (Timed) PRIOR MLS COVERED IN THIS MANUAL ML-134211 ML-134213 ML-104421 ML-134114 D300T
More informationMICRO XXV Gas Page Saw 1 of 16
MICRO XXV Gas Page Saw 1 of 16 CARBURETOR WA-19 (3500 Small Engine Parts 1 530035006 Shutter Throttle 2 530035015 Screw-Throttle Shutter 3 530035024 Spring-Throttle Return 4 530035034 Shaft-Throttle 5
More informationDELCO 20/22/25/27MT BREAKDOWN
DELCO 20/22/25/27MT BREAKDOWN J&N UNIT # JanNco # OE PART # LESTER # TYPE VOLT ROTATION TEETH 410-12027 25MT 12 CW 9 410-12028 410-12028R 1109264 6177 25MT 12 CW 10 410-12030R 20MT 12 CW 10 410-12031 410-12031R
More informationInstruction Manual P/N: Make: Nissan Model: 370z Year: Engine: V6-3.7L
Instruction Manual P/N: 12529003 Make: Nissan Model: 370z Year: 2009-2012 Engine: V6-3.7L Please read the entire instruction manual before proceeding. Ensure all components listed are present. If you are
More informationAuto-Adjust II Turbo-Meters
Sensus Metering Systems Auto-Adjust II Turbo-Meters " AAT-0 and " AAT-30 MP-03D R Parts List T H E G A S I N D U S T R Y 0 6 5 8 9 3 3 Pressue Tap All Working Pressures Body Assembly Components Main Body
More information824XL, 824XL Int l Snowthrower
Form No. 824XL, 824XL Int l Snowthrower Model No. 38086 200000001 and Up Model No. 38066 200000001 and Up Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part number,
More informationRAM P/N AH04415R Double Reduction Wheel Drive SERVICE MANUAL
RAM P/N AH04415R Double Reduction Wheel Drive SERVICE MANUAL Power Wheel Service Manual Model 7 Double Reduction Wheel Drives AUBURN, INDIANA 46706-3499 U.S.A. PHONE: (219) 925-3200 FAX: (219) 925-4725
More informationMagnesium Option, Late Model Front Seal, Viton, P/N 67256V Rear Seal, Viton, P/N 67257V Shifter Installed Heat Treated Yoke, P/N
DESCRIPTION OPTION Magnesium Option, Late Model 80100L Front Seal, Viton, P/N 67256V 80109 Rear Seal, Viton, P/N 67257V 80110L Shifter Installed 80112L Heat Treated Yoke, P/N 62946-6 80119-6 Heat Treated
More informationPowers Controls No. 6 Pneumatic Damper Actuator
Document No. 152-013P25 Powers Controls No. 6 Pneumatic Damper Actuator OEM Literature Basic Actuator Typical Actuator with Clevis and Pin Actuator with Extended Shaft and Frame Mounting Accessories Description
More information3400 Gas Saw Page 1 of 25 Bow Guide & Chain Informatio
3400 Gas Saw Page 1 of 25 Bow Guide & Chain Informatio 44235 13".050/ 3/8 pitch, P760-80 Bow Guide 51293 13".050/ 3/8 pitch, P760-80 Chain 44236 14".050/ 3/8 pitch, P760-87 Bow Guide 51294 14".050/ 3/8
More informationBrushcutter. Model No & Up. Parts Catalog
Form No. 5-727 Rev. A Brushcutter Model No. 51992 20000001 & Up Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part number, the quantity, and the description of
More informationEDGE GUARD PARTS AND ACCESSORIES. Innovative Products to Simplify Construction GRID CLIP ASSEMBLY 3001 CAM LOCK ASSEMBLY 3002 CLOSURE STRIP 3003
Innovative Products to Simplify Construction DESCRIPTION PART NO. GRID CLIP ASSEMBLY 3001 CAM LOCK ASSEMBLY 3002 CLOSURE STRIP 3003 SCREW JACK ASSEMBLY 3004 DIGITAL DIFFERENTIAL EDGE GUARD PARTS AND ACCESSORIES
More informationParts List 6 MODEL T-35 and T-57 Mark II Turbo-Meters with Blade Tip Sensors
MP-1070BS Metering Systems Parts List 6 Model T-35 and T-57 Mark II Turbo-Meter with Blade Tip Sensors Parts List 6 MODEL T-35 and T-57 Mark II Turbo-Meters with Blade Tip Sensors Working Pressures: 175,
More informationSuper EZ Chain Saw UT Page 1 of 19 Carburetor
Super EZ Chain Saw UT-10580 Page 1 of 19 Carburetor Super EZ Chain Saw UT-10580 Page 2 of 19 Carburetor 1 93203A 1 /P Repair Kit Includes items 1-16. 2 93203A 1 /P Repair Kit Includes items 1-16. 3 93203A
More informationBrushcutter. Model No A & Up. Parts Catalog
Form No. -08 Rev. A Brushcutter Model No. 1990A 20000001 & Up Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part number, the quantity, and the description of each
More informationERDS17550E. Tondeuse à conducteur marchant Pièces détachées Avertissement!
03-001398-150323 Tondeuse à conducteur marchant Pièces détachées ERDS17550E Avertissement! Lire et comprendre le présent manuel dans son intégralité avant d utiliser cette machine ou de procéder à son
More informationStraight Shaft String Trimmer
Form No. -72 Rev. A Straight Shaft String Trimmer Model No. 1972 20000001 & Up Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part number, the quantity, and the
More informationParts List 12 MODEL T-140 and T-230 Mark II Turbo-Meters with Blade Tip Sensors
MP-1070DS Metering Systems Parts List 12 Model T-140 and T-230 Mark II Turbo-Meter with Blade Tip Sensors Parts List 12 MODEL T-140 and T-230 Mark II Turbo-Meters with Blade Tip Sensors Working Pressures:
More informationHighly Styled, Low Cost Serpentine Drive
Highly Styled, Low Cost Serpentine Drive Installation Instructions Chrysler 18, 40 and 60 Kit #4040 (without Power Steering) 66.5" Belt Kit #40440 (with Remote Power Steering) 81.5" Belt Kit #40445 (with
More informationPrinted from MediaCat
Illustration A Crankcase, Cylinder Illustration A Crankcase, Cylinder Ref.Nr. Item code Quantity Description 1 1113 020 2107 1 Crankcase (1,2,4,5,7,8) 2-11 1 1113 020 2108 1 Crankcase (3,6) 2-11 2 1113
More informationINVADER MODEL K5UR100ML UTILITY AND MANLIFTER AIR WINCH. Warning! Review WINCH OPERATING PRACTICES Prior to use.
Instructions, Parts and Maintenance Manual INVADER MODEL K5UR100ML UTILITY AND MANLIFTER AIR WINCH Warning! Review WINCH OPERATING PRACTICES Prior to use. Always operate, inspect and maintain this winch
More informationBennett Pump Company
Bennett Pump Company SB-100 Meters Operation, Service & Parts Manual Only Trained Personnel May Work on This Equipment For more information, please contact: Jim Biesecker, Component Sales 1218 E. Pontaluna
More informationStraight Shaft String Trimmer
Form No. 5-507 Rev. A Straight Shaft String Trimmer Model No. 51970A 250000001 & Up Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part number, the quantity, and
More informationTransfer Valve Actuator Service Parts List
Document Number SPL82395 Issue Date 12/10/99 Rev. Date 01/22/08 Transfer Valve Actuator Service Parts List Manual Actuator, Top Mounted Manual Actuator, Bottom Mounted Electric Actuator, Top Mounted Electric
More information9/8/ MSHZ 2001 / TOP COWLING Yamaha Motor Corporation, U.S.A. All rights reserved.
9.9MSHZ 00 Page of 47 9/8/04 9.9MSHZ 00 / TOP COWLING 04 Yamaha Motor Corporation, U.S.A. All rights reserved. 9.9MSHZ 00 Page of 47 9/8/04 Part List 9.9MSHZ 00 / TOP COWLING REF - NO PART NUMBER PART
More informationT-35/T-57 MARK II TURBO-METER GENERAL ASSEMBLY
MP-G-TBO-10-70B-0812-01-A 6" Model T-35/T-57 Mark II Turbo-Meter Parts List Working Pressures: 175, 275, 720, 1440 psi 12a 12 10 17 18 23 28 25 27 24 26 13 11 92 15 14 93 26a 29 32 76 44 43 8 9 83 84 79
More informationPony V Page 1 of 24 Battery Mounting Bracket
5151 Pony V Page 1 of 24 Battery Mounting Bracket 5151 Pony V Page 2 of 24 Battery Mounting Bracket 2 9296 2 CABLE- battery (replaces #9223) 4 9224 1 CLIP- vent tube shield (small) 6 9826 2 NUT- hex, 5/16"-24
More informationFIGURE 1-3. LEFT OP CONTROL BOX. MARCH/2011 HST-1-3, Page 1 of 2
FIGURE 1-3. LEFT OP CONTROL BOX MARCH/2011 HST-1-3, Page 1 of 2 FIGURE 1-3. LEFT OP CONTROL BOX MARCH/2011 HST-1-3, Page 2 of 2 FIGURE 1-3A. LEFT OP CONTROL BOX MARCH/2011 HST-1-3A, Page 1 of 2 FIGURE
More informationFORM NO Rev A. Powershift. 824 Snowthrower. Model No & Up Model No & Up. Parts Catalog
FORM NO. 3321 631 Rev A Powershift 824 Snowthrower Model No.38542 9900001 & Up Model No.38546 9900001 & Up Parts Catalog ORDERING REPLACEMENT PARTS To order replacement parts, please supply: the part number,
More informationCOMPACT WHEEL LOADERS 7020, 7020BH Parts Catalog Ingersoll HOME TRACTORS ATTACHMENTS INDEX ENGINES GENERAL INFO. casecoltingersoll.
R Ingersoll COMPACT WHEEL LOADERS 7020, 7020BH Parts Catalog 8-3370 HOME TRACTORS ATTACHMENTS PAINT ENGINES GENERAL INFO PRODUCT IDENTIFICATION NUMBERS (PIN) AND SERIAL NUMBERS (S/N) TRACTOR MODEL AND
More informationPARTS CATALOGUE. Rockford Motors inc.
PARTS CATALOGUE Rockford Motors inc. INSTRUCTIONS FOR USING THE PARTS CATALOGUE 1. This catalogue covers all the items of genuine parts and tools of BRIDGESTONE 350 GTR and 350 GTO motorcycles. 2. Please
More informationMODELS JG43, JG63, JG83 JG44, JG64, JG84
MODEL J STYLE G HERMETIC COMPRESSORS RENEWAL PARTS Supersedes: 180.23-RP4 (695) Form 180.23-RP4 (1298) MODELS JG43, JG63, JG83 JG44, JG64, JG84 (See Page 2 for Complete Model Nomenclature) 27531A UNIT
More informationPOWERS Controls. Technical Instructions Document No P25 AP December 3, No. 6 Pneumatic Damper Actuator.
POWERS Controls No. 6 Pneumatic Damper Actuator Technical Instructions AP 331-3 331-2793 Actuator 331-2857 Actuator with Clevis and Pin 331-3012 Extended Shaft and Frame Mounting Description The POWERS
More informationTugger T-Bolts Coupling (Extension) Nuts Eye Bolts Metric Coupling (Ext.) Nuts Latch Swing Bolts Heavy Hex Nuts...
INDEX Threaded Rod... 4 T-Slot Nuts... 14 Driver Studs - Stainless Steel... 4 Stainless Steel T-Nuts... 14 Driver Studs... 4-5 Stainless Steel Flange Nuts... 15 Driver Studs Various Thread Lengths... 6
More informationPage 1 of 7 Section 05-03A: Axle, Front Drive, Dana Models 44 and 50 1996 Bronco/F-Series Workshop Manual DESCRIPTION AND OPERATION Procedure revision date: 06/19/2000 Hubs, Automatic Lock Refer to Section
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS MODEL 6430 & 6460 POTATO PEELER 6430 ML-019628 6430T ML-019629 6430T W/O MOTOR ML-038699 6430C ML-104560 6430CT ML-104561 6460 ML-019630 6460T ML-019631 6460T W/O MOTOR ML-038700
More informationSuper EZ Chain Saw UT Page 1 of 18 Tools And Accessories
Super EZ Chain Saw UT-10440 Page 1 of 18 Tools And Accessories Super EZ Chain Saw UT-10440 Page 2 of 18 Tools And Accessories 24299 24299 ANVIL- Crankshaft installation 24304 24304 BIT- #2 pozidrive 24295
More informationDrawing A Crankcase 041 AV SCS
Drawing A Crankcase 1 Drawing A Crankcase Reference Item number Qty Description 1 1110 020 2105 1 Crankcase 2-5, 9, 10, 12 2 9371 470 3120 2 Cylindrical pin 6x20 3 9048 216 1010 8 Pan head screw M5x18
More informationINSTRUCTION AND MAINTENANCE MANUAL GC31 COMMANDAIRE POSITIONER
Enidine / Conoflow 15 Commerce Way Westminster, SC 29693 Tel: (864) 647-9521 Fax: (864) 647-7993 WARNING Conoflow products are designed and manufactured using materials and workmanship required to meet
More informationDVX 90 MODEL NUMBER A2008KSB2BUSD (BLACK-RED) MODEL NUMBER A2008KSB2BUSE (BLACK-CAT GREEN) MORE TO GO ON. TM
2008 DVX 90 Illustrated Parts Manual MODEL NUMBER A2008KSB2BUSD (BLACK-RED) MODEL NUMBER A2008KSB2BUSE (BLACK-CAT GREEN) MORE TO GO ON. TM TABLE OF CONTENTS Black-Red (Model No. A2008KSB2BUSD) Black-Cat
More information4 Tri-Seal Disassembly Instructions
4 Tri-Seal Disassembly Instructions 1. Remove the cable guard and suction screen from the pump. Unbolt the pump end from the motor. 3. Remove the rotating assembly from the pump shell. Ensure that all
More informationPrinted from MediaCat
Illustration A Crankcase, Crankshaft Illustration A Crankcase, Crankshaft Ref.Nr. Item code Quantity Description 1 1117 020 2106 1 Crankcase 2-9 2 9022 341 1050 4 Spline screw IS-M5x25 3 0000 988 5211
More informationSXLAO Chain Saw UT Page 1 of 21 Carburetor Chamber
SXLAO Chain Saw UT-10045 Page 1 of 21 Carburetor Chamber SXLAO Chain Saw UT-10045 Page 2 of 21 Carburetor Chamber 1 59274 1 GASKET- Spacer 2 59718 1 SPACER 3 63260A 1 RETAINER- Reed valve 4 63253 1 SEAT-
More informationIlustrated Parts List
Spicer Drive Axles Ilustrated Parts List Spicer All Wheel 4 x 4 Drive System AXIP-0400 November 1999 Page to Insert The Spicer 4x4 Drive System Axle models and other equipment covered in this publication
More informationWEAVER JACK CORP. MASTER PARTS PRICE & IDENTIFICATION LIST. (517) Fax (517) MINIMUM BILLING $20.00
EFFECTIVE JULY 1, 2014 WEAVER JACK CORP. MASTER PARTS PRICE & IDENTIFICATION LIST (517) 263-6500 Fax (517) 263-2810 MINIMUM BILLING $20.00 THIS PRICE LIST SUPERSEDES ALL PREVIOUS PARTS PRICE LISTS (Prices
More informationCATALOG OF REPLACEMENT PARTS GAS TILTING KETTLES MODEL
CATALOG OF REPLACEMENT PARTS GAS TILTING KETTLES MODEL VGLT-20 VGLT-30 VGLT-40 VGLT-60 ML-52994 ML-114955 ML-52995 ML-52996 For additional information on Vulcan-Hart Company or to locate an authorized
More informationFilm-Tech. The information contained in this Adobe Acrobat pdf file is provided at your own risk and good judgment.
Film-Tech The information contained in this Adobe Acrobat pdf file is provided at your own risk and good judgment. These manuals are designed to facilitate the exchange of information related to cinema
More information824 Snowthrower. Parts Catalog. Form Number Rev A. Model No and up. Model No and up.
Form Number 3322-802 Rev A 824 Snowthrower Model No. 38053-200000001 and up. Model No. 38078-200000001 and up. Parts Catalog Ordering Replacement Parts To order replacement parts, please supply the part
More informationIn Accordance with COMAR and COMAR A(2) Diaphragm Meters - Aluminum Case
In Accordance with COMAR 20.55.05.02 and COMAR 20.25.01.04-1A(2) Diaphragm Meters - Aluminum Case Models: 80B AL-175 5B-225 250B AC-250 AL-250 AL-425 500B AL-600 AC-630 AL-800 AL-1000 AL-1400 AL-2300 AL-5000,
More information48cm Lawnmower. Parts Catalog. Form No Model No and Up Model No and Up
Form No. 335-640 4cm Lawnmower Model No. 1094 10000001 and Up Model No. 1099 10000001 and Up Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part number, the quantity,
More information2 20011 Rod End, 12 IHS A 6 50052 V-belt 7 10061 Bolt Allen 8 10071 Washer 9 50082 Belt Pulley w/shaft 10 10091 Bolt Hex 11 20101 Pivot bearing 12 10111 Nut 13 70121 Connecting Rod, Vertical 15 70141 Cover
More informationHeavy Duty Front-Drive Steer Axles MX-140 and MX-160 Series
Revised 11/2009 Heavy Duty Front-Drive Steer Axles MX-140 and MX-160 Series Catalog PB-0349 Strength Power Speed Agility MERITOR PARTS. RIGHT FROM THE START. TABLE OF CONTENTS MX-17/19/21-140 and MX-21/23-160
More informationR190 Lawn Boss 21 (1989) Page 1 of 8 Body Assembly
129-476R190 Lawn Boss 21 (1989) Page 1 of 8 Body Assembly 129-476R190 Lawn Boss 21 (1989) Page 2 of 8 Body Assembly 1 731-0609 1 Control Handle Ass'y. 3 710-0796 1 /P Truss Mach. B-Tap Scr. #12 x 1.5"
More informationKJ Main Components - 120V 60Hz. Jetter. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Jetter KJ-0 Main Components - 0V 0Hz 0 0 NOTE: Order parts by Catalog Number only. Decal, Potable Water 0 Decal, Model Number Decal, Warning Motor Shroud 0 Hand Grip Handle Cord Wrap Pan Head Screw, #
More informationModel No: PDM260F. Parts Information: Pillar Drill Floor 12-Speed 1710mm Height 230V
1 PDM260F-1-01 RACK COLLAR 2 GSM610.S GRUB SCREW M6x10 (SINGLE) 3 PDM260F-1-03 TABLE SUPPORT 4 PDM260F-1-04 CRANK 5 PDM260F-1-05 HANDLE CRANK 6 PDM260F-1-06 RACK 7 PDM260F-1-07 SCREW-HEX SOC SET M10X1.5-12
More information155 CARTRIDGE SINGLE SEAL
MECHANICAL SEAL INSTALLATION INSTRUCTIONS 155 CARTRIDGE SINGLE SEAL SEAL INSTALLATION Preparation Determine if the pump is in good condition. A. Check the shaft or sleeve. 1. Remove all burrs and sharp
More informationHousing 3 GT/GTS Gas Turbine Meter
PL4802.2 Housing 3 GT/GTS Gas Turbine Meter 12 6 5 4 11 9 2 8 7 3 1 2 3 GT/GTS Gas Turbine Meter Housing Item No. Description Qty. Common To All Variations Part Numbers Product Variations 275 PSIG 1440
More informationNo. CLMP05 January 11, Parts Price List Clausing Lathes & Mills P.O. BOX 877 GOSHEN, IN PHONE (574) FAX (574)
No. CLMP05 January 11, 2005 P.O. BOX 877 GOSHEN, IN 46527-0877 PHONE (574) 533-0371 FAX (574) 533-0403 EMAIL info@clausingsc.com Website http://www.clausing-industrial.com Note: Please do not give credit
More informationi4550b Chain Saw UT Page 1 of 2 Carburetor - Muffler - Air Filter
i4550b Chain Saw UT-10807 Page 1 of 2 Carburetor - Muffler - Air Filter i4550b Chain Saw UT-10807 Page 2 of 2 Carburetor - Muffler - Air Filter Referenznumme Artikelnummer Menge Description 1 UP06752 1
More informationReproduction. Not for TWO STAGE LARGE FRAME SNOW THROWER 27" 11.5TP. Parts Manual for M1277E Snowthrower, 27"
Parts Manual for TWO STAGE LARGE FRAME SNOW THROWER 27" 11.5TP Model No. Description 1695734 M1277E 130.887650 Snowthrower, 27" Briggs & Stratton Yard Power Products Group 535 Macon Road McDonough, GA,
More informationLube Level Maintainer
Lube Level Maintainer Models LM500/LM500-TF Installation Instructions 00-02-0729 2015-05-30 Section 15 BEFORE INSTALLING THIS MURPHY PRODUCT: A visual inspection of this product for damage during shipping
More informationWARNING: To reduce the risk of SAVE THIS MANUAL FOR FUTURE REFERENCE
' ($ 0$$/,&+)/ 0'(/',//( WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Part SP0 SAVE THIS MANUAL FOR FUTURE REFERENCE Printed
More informationFORM NO Z Master OFZ 48 Rear Discharge Recycler Deck. Model No & Up. Parts Catalog
FORM NO. 3319 933 Z Master OFZ 48 Rear Discharge Recycler Deck Model No. 78477 890523 & Up Parts Catalog ORDERING REPLACEMENT PARTS To order replacement parts, please supply: the part number, the quantity,
More informationPARTS LIST FOR MECCANO No. 10 vs No. 7 & "L" 10/37? P/N Description 7/25 10/49 10/49 10/55 10/86 L 1 Perforated Strip 25 holes a
PARTS LIST FOR MECCANO No. 10 vs No. 7 & "L" 10/37? P/N Description 7/25 10/49 10/49 10/55 10/86 L 1 Perforated Strip 25 holes 50 24 24 24 24 38 1a Perforated Strip 19 holes 12 6 6 6 6 16 1b Perforated
More information17 in. Gas Trimmer - Curved Shaft
Form No. 78-7 Rev. A 17 in. Gas Trimmer - Curved Shaft Item No. 198 1000001 & Up Manufacturing No. 09009019 Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS ELECTRIC AND GAS BRAISING PANS MODELS VG30 VG40 VE30 VE40 ML-126847 ML-126848 ML-126849 ML-126850 For additional information on Vulcan-Hart Company or to locate an authorized
More informationREPAIR PARTS MANUAL MODEL NUMBER SB240 (MFG. ID. NO ) Snow Thrower BY Printed in U.S.A.
MANUAL MODEL NUMBER SB0 (MFG. ID. NO. 919000) Snow Thrower 3 0 1-0.8.0 BY Printed in U.S.A. AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL NO. SB0 (919000), PRODUCT NO. 91 91 00-0 1 1 13 1 1 1
More informationAluminum Conduit Bodies, Covers and Gaskets For Rigid Conduit & IMC.
NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/upgrades. Allows connection of straight conduit runs, branch
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PTS SLICERS (INCLUDES MOTOR PTS) 8PS 8RS ML-089 ML-090 A product of HOBT CORPORATION 70 RIDGE AVENUE TROY, OHIO 7-000 FORM 9 (0-9) 8PS/8RS SLICERS REPLACEMENT PTS 6-7 - - PL-97 PT
More informationParts list. See Frame parts list Page 12. See hydraulic pump. exploded view. Page 14. See work head. exploded view. Page 7
Parts list See Frame parts list Page 12 See hydraulic pump exploded view Page 14 See work head exploded view Page 7 See electrical parts list Page 18 See hoist parts list Page 11 See Frame parts list Page
More informationROAD RACE BAFFLE for LT OIL PANS P/N
ROAD RACE BAFFLE for LT OIL PANS P/N 302-30 Instruction Sheet 199R11191 NOTE: This instruction sheet is intended for installation after a Holley LT oil pan (302-20) has previously been installed. If installing
More informationRIDGID 12 in. SLIDING COMPOUND MITER SAW MODEL NUMBER MS1290LZ1 FIGURE A. See Figure E
9 FIGURE A 77 7 8 78 1 0 8 7 1 0 19 18 17 1 1 1 1 79 9 See Figure E 11 10 7 7 80 8 9 7 9 7 81 9 8 8 0 8 8 9 8 8 9 0 1 0 7 1 1 1 9 0 1 7 70 7 7 7 7 71 1 81 7 7 PARTS LIST FOR FIGURE A 1 801 BASE/TABLE ASSEMBLY...1
More informationSISU DP-330 DRIVE GEAR. Maintenance Manual
SISU DP-330 DRIVE GEAR Maintenance Manual Sisu Axles, Inc. Autotehtaantie 1 PO Box 189 Fin-13101 Hameenlinna Finland Phone +358 204 55 2999 Fax +358 204 55 2900 DP330DG.PDF (3/2007) TABLE OF CONTENTS
More informationParts Catalog. S-Series Slicer Standard Automatic S13A. Model:
, 08 99508 ECN 0 Parts Catalog S-Series Slicer Standard Automatic Model: SA SA 0/5/8/08 Rev. Y IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
More informationKJ Motor/Pump Assembly. Jetter. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
KJ-000 Motor/Pump Assembly NOTE: Order parts by Number Only. 0 0 0 Gasoline Engine, Hp Manual Start 0 Gasoline Engine, Hp Electric Start Decal, Warning 0 Decal, Fuel Warning Decal, Model. KJ-000 Key, /
More informationFinding Top Center Position for No. 1 Piston. Set The Top Center Position By Temporary Marks On Type 1 Engines and 9RM Engines
Page 1 of 14 Finding Top Center Position for No. 1 Piston Set The Top Center Position By Temporary Marks On Type 1 Engines and 9RM Engines Various Fuel Injection Pumps may be equipped to the engine. Delphi
More informationEdelbrock Victor II Intake Manifold. For Chrysler 5.7L (Eagle), 6.1L and 6.4L Gen III HEMI Engines Part #7179
For Chrysler 5.7L (Eagle), 6.1L and 6.4L Gen III HEMI Engines PLEASE study these instructions carefully before beginning this installation. You should be familiar with and comfortable working on your
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS 4822 CHOPPER ML-136125 PRIOR ML COVERED IN THIS MANUAL ML-136102 A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43093 Rev. D (July 2012) F-43093 Rev. D
More informationK&T Saw Shop or
12-600031U PRO MAC 55 08/73 to 03/77 IPL 92384A-R1 Page 1 of 20 Accessories www.ktoutdoor.com 12-600031U PRO MAC 55 08/73 to 03/77 IPL 92384A-R1 Page 2 of 20 Accessories 84453 Kit - Piston tool 69191 Kit
More informationAMARILLO PUMP DRIVES MODEL 1 OOOA, 1200, 1500, 1800
AMARILLO PUMP DRIVES MODEL 1 OOOA, 1200, 1500, 1800 INSTRUCTIONS FOR REPAIRING MARCH 1, 1993 AMARILLO GEAR COMPANY Post Office Box 1789, Amarillo, Texas 79105 806 / 622-1273 FAX 806 / 622-3258 INSTRUCTIONS
More informationAPPENDIX B Power wagon winch INSTALLATION Requires Power Wagon Winch Mounting Kit (PN: AA)
APPENDIX B Power wagon winch INSTALLATION Requires Power Wagon Winch Mounting Kit (PN: 10305134AA) Rotate the gear housing 1. Remove the Power Wagon winch mount bracket. 2. Remove the winch hook (if installed).
More informationBPW Trailer axle HZF ECO Plus
BPW Trailer axle HZF 900-5 ECO Plus L ( form closure ( square ) ) Brake SN 428 for ABS, with sensors Track 840 mm, Spring centre 950 mm, Booster bracket centre 4 mm for diaphragm cylinder, AGS ECO-Master,
More informationREPAIR PARTS SNOW THROWER -- MODEL NUMBER PR5524ESNHL ( ) AUGER HOUSING / IMPELLER ASSEMBLY
REPAIR S SNOW THROWER -- MODEL NUMBER PRESNHL (9900700) AUGER HOUSING / IMPELLER ASSEMBLY 7 0 7 9 0 9 7 0 (EXPLODED) 9 0.07.00-B NOTE: All component dimensions given in U.S. inches. inch =. mm 0 REPAIR
More informationKunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
More informationParts Catalog. S-Series Slicer Standard Automatic Frozen Option S13A. Model:
, 08 995 ECN 0 Parts Catalog S3A S-Series Slicer Standard Automatic Frozen Option Model: S3A 0/09/08 Rev. W IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL
More informationKunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
More informationand 1/4 TURN SECOND STAGE REGULATOR TAL 502 (L) Rev. 0 MSA 2005 Prnt. Spec (I) Mat Doc
and 1/4 TURN SECOND STAGE REGULATOR TAL 502 (L) Rev. 0 MSA 2005 Prnt. Spec. 10000005389 (I) Mat. 10064383 Doc. 10064383 REGULATOR COMPONENTS Item Part No. Description 1 MASK MOUNTED REGULATOR ASSEMBLY
More informationSPIT TFIRE AIR WARNING! Review
INSTRUCTIONS, PARTS AND MAINTENANCE MANUAL SPIT TFIRE H5UR50-18MX1 UTILITY AIR WINCH WARNING! Review WINCH OPERATING PRACTICES prior to use. Always operate, inspect and maintain this winch in accordance
More informationG190 LT-145 (1992) Page 1 of 27 42" Mower Deck
132-736G190 LT-145 (1992) Page 1 of 27 42" Mower Deck 132-736G190 LT-145 (1992) Page 2 of 27 42" Mower Deck 3 17600A 1 S 42" Deck Ass'y. Code: N notates a new part (not previously existing). 813-06119
More informationBD Twin Turbo Cobra Kit
17 March 2017 1045780-94 Dodge Cobra Kit (I-00377) 1 BD Twin Turbo Cobra Kit 2003-2012 Dodge HPCR Machined BD turbochargers only BUILDERS KIT Installation reccomendations to aid asssembly Does not include
More informationPrinted from MediaCat
Illustration A Crankcase Illustration A Crankcase Ref.Nr. Item code Quantity Description 1 1119 020 2118 1 Crankcase (1,3,5) 2-11 1 1119 020 2109 1 Crankcase (6,8,9) 2-11 1 1119 020 2119 1 Crankcase (2,4)
More informationMarch Performance Corvette Alt. & P/S Kits Revolver Chrome Alt. & P/S Revolver Billet Alt & P/S Style Track Chrome Alt & P/S Kit
March Performance Corvette Alt. & P/S Kits 21175- Revolver Chrome Alt. & P/S 21180- Revolver Billet Alt & P/S 21140-Style Track Chrome Alt & P/S Kit 21145- Style Track Billet Alt. & P/S Kit PARTS LIST
More informationMAIN PRICE LIST. - B 487 Perforated Strip 2 1/2" B 488 Perforated Strip 3 1/2" B 482 Perforated Strip 4 1/2" 9 1.
PERFORATED STRIPS LENGTH HOLES GBP 1 Perforated Strip 12 1/2" 25 1.63 1 a Perforated Strip 9 1/2" 19 1.51 1 b Perforated Strip 7 1/2" 15 1.39 2 Perforated Strip 5 1/2" 11 0.90 2 a Perforated Strip 4 1/2"
More informationPower Max Commercial 1028 OHXE Snowthrower
Form No. 3415-768 Rev B Power Max Commercial 1028 OHXE Snowthrower Model No. 38806 Serial No. 400000000 and Up Register at www.toro.com. Original Instructions (EN) *3415-768* B Ordering Replacement Parts
More information