Filter - Regulator - Lubricator
|
|
- Rudolf Hines
- 6 years ago
- Views:
Transcription
1 atalog #R-06 ilter - Regulator - ubricator ist - Effective September 1, 2011 Page 1
2 BO-IR, Inc N.E. 49th venue Gainesville, Tel (352) Quick Reference Guide 5,,, 1 escription R ilter, regulator, lubricator (Pages 4 & 5) 5,,, 1 escription ilter, regulator combo (Pages 14 & 15) 5,,, 1 escription ilter regulator, lubricator (Pages 6 & 7) 5,,, 1 escription ilter (Pages 16 & 17),, escription M ilter regulator, mist separator (Pages 8 & 9),, escription M Mist Separator (Pages 16 & 17) 5,,, 1 escription R ilter, regulator (Pages 10 & 11) 5,,, 1 escription R Regulator (Pages 18 & 19),, escription MR -ilter, mist separator, regulator (Pages 12 & 13) 5,,, 1 escription ubricator (Pages 20 & 21) 5 escription Gauges (Page 22),, escription ock out, tag out valve (Page 22) ccessories and Parts Pages 22 and 23 1/2 escription 3-way slide valve (Page 23) Page
3 BO-IR, Inc. ax (352) Web Site: 1 Year Warranty How to Order Regulator Max. 102 psi Size ( ) 2.. (28 SM) 3.. (53 SM) 4.. (106 SM) 5.. (350 SM) We warrant the ilter-regulator-ubricator product to be free from defects in material and workmanship for a period of one (1) year from the date of shipment from abco-ir. (See Product Precautions on pages 17, 19 and 21.) escription ilter Mist Separator (1µ fi ltration) M Regulator R ubricator ilter/regulator ombo ombo with ubricator ilter, Regulator R ilter, Regulator, ubricator R ombo with Mist Separator M ilter, Mist Separator, Regulator MR Series 3 R 2P Regulators feature these gauges as standard: Sizes 2, 3 & 4; square embedded (psi scale). Size 5; round NPT (bar and psi scale). 2 NPT (Size 2 only) P (Size 2 and 3) P (Size 3 only) P 1/2 (Size 4 only) P (Size 4 and 5) P 1 (Size 5 only) P ilter Rating Option eave blank for standard (5µ fi ltration std for sizes 2, 3 & 4; 40µ fi ltration std for size 5) 5µ for size µ for sizes 2, 3, 4 & µ for sizes 2, 3 & rain (requires 15 psi min.) uto rain, loat Type Pressure ifferential rain..... M (also allows manual release of fl uids) Pressure Range for Regulator - Option eave blank for standard 5 to 125 psi range 5 to 35 psi to 60 psi S Gauge - Option eave blank for standard Block off plate B NPT adapter plate NPT adapter plate Round gauge w/adapter plate Small NPT arge NPT G Square embedded MPa.... M Example Model Number -MR2PM Series, body size 2, fi lter-mist separator-regulator, NPT ports, with manual drains and standard pressure gauge Page 3
4 ilter - Regulator - ubricator with two Type Mounting Brackets BO-IR, Inc N.E. 49th venue Gainesville, Tel (352) T Ported Interface available - see page 22 -Type mounting brackets standard with Rs. Optional 3-way lockout/tagout valve shown. See page 23. Polycarbonate bowls are standard for all models. Regulators feature square embedded outlet pressure gauge with psi scale. (145 psi = 1.0 MPa = 10 bar). SEE PROUT PREUTIONS ON PGES 17, 19 N 21. Plastic bowl guards are standard for all models How to Order escription: ilter, Regulator, ubricator Series ; Size 2, 3, 4 or 5 R 2P Pressure range for regulator - Option: Blank for standard 5 to 125 psi = 5 to 35 psi S = 5 to 60 psi NPT: 1P=; 2P=; 3P=; 4P=1/2; 5P=; 6P=1 rain (requires 15 psi min.): = uto drain, float type M = Manual/Pressure differential drain ilter rating - Option: (blank for standard of 5μ for sizes 2, 3 & 4 ; 40μ for size 5) 1 = 5μ; 2 = 25μ; 3 = 40μ Manual drain also opens as inlet pressure is reduced to less than 5 psi. Gauge - Option: Blank for standard B = Block off plate = NPT adapter plate = NPT adapter plate = Small round gauge with NPT adapter plate G = arge round gauge with NPT adapter plate M = Square embedded MPa scale External imensions - inch (mm) Size Sizes, 4 & 5 B imension E G H J K P Manual rain uto rain loat type 5,,, 1 5.5(140) 7.1(181) 9.4(238) 11.1(282) 1.7(44) 1.9(48) 1.7(43) 1.5(38) 3.3(84) 1.6(41) 2.5(64) 3.3(84) 3.8(96) 0.9(24) 1.4(35) 0.22(5.5) 0.28(7.0) 0.35(9.0) 0.47(12) 0.33(8.5) 0.43(11) 0.51(13) 0.63(16) 0.2(5) 0.3(7) 0.3(7) 0.4(10) 2.7(67.5) 4.5(115) 5.5(140) 6.3(160) 8.4(214) 12.2(309.5) 5.3(134) 6.6(169) 8.4(213) 11.7(297) Page
5 Specifications BO-IR, Inc. ax (352) Web Site: Specifications Series / Model Size 5 Port size NPT,,, 1 Operating media ir Max. operating pressure: psi (MPa) (bar) 145 (1.0) (10) Regulating range: psi (MPa) (bar) Standard: 5 to 125 (0.04 to 0.85) (0.4 to 8.5) Max. flow rate* 28(800) 53(1500) 106(3000) 350(10000) Temperature range 5 to 52 (+23 to 125 ) iltration Standard 5μ 5μ 5μ 40μ Recommended oil Turbine oil (ISO VG32) Exxon Terrestic GT32 or equal Bowl material Polycarbonate onstruction / Regulator Relieving type Weight lb.(kg) 1.5(0.7) 2.2( 1 ) 4.4 (2 ) 8.4 (3.8) * low SM 102psi (0.7 MPa)(7bar) inlet pressure. ccessories and Mounting See pages 22 & 23. ccessories 5 Round Pressure Gauge GR-1P GR-1P GR-2P GR-2P Square Embedded Gauge GS-P (psi scale) or GS-M (MPa scale) N Standard Interface NS2 NS3 NS4 NS5 T Ported Interface NT2-1P, NT2-2P NT3-1P, NT3-2P NT4-2P, NT4-3P N ock Out/Tag Out Valve T2-1P, T2-2P T3-2P, T3-3P T4-4P, T4-5P N Sleeve Valve SV-2P SV-2P; SV-3P SV-4P N Mounting -Type Mounting Bracket MB2 MB3 MB4 MB5 T-Type Mounting Bracket MBT2 MBT3 MBT4 MBT5 Round gauge requires gauge adapter plate #G-1P (for NPT) or #G-2P (for NPT). Pricing - Effective 9/1/11 Port NPT 1/2 1 Manual drain -R1PM -R2PM -R2PM -R3PM -R4PM -R5PM 5-R5PM 5-R6PM $ Manual drain also opens as inlet pressure is reduced to less than 5 psi. No charge for optional filter ratings, pressure ranges, or gauges. uto drain -R1P -R2P -R2P -R3P -R4P -R5P 5-R5P 5-R6P Replacement Parts See page 23. ilter Element: 5μ, 25μ & 40μ omplete Bowl w/uto rain omplete Bowl w/manual rain Bowl only for fi lter Bowl Guard for fi lter or lubricator Regulator iaphragm Regulator Knob ubricator Bowl ubricator Pickup Tube (w/fi lter when applicable) ubricator djuster w/sight dome included ubricator Plug for ill Port $ low haracteristics - Inlet pressure = 102 psi Pressure haracteristics Set point conditions: Inlet pressure = 102 psi; Outlet pressure = 29 psi; low rate = 0.7 SM Page 5
6 ilter / Regulator ombo with ubricator and T Type Mounting Bracket BO-IR, Inc N.E. 49th venue Gainesville, Tel (352) ilter/regulator ombo with ubricator features square embedded outlet pressure gauge with psi scale (145 psi = 1.0 MPa = 10 bar) and one T Type mounting bracket. T Type mounting bracket. SEE PROUT PREUTIONS ON PGES 17, 19 N 21. How to Order escription: ilter/regulator ombo, ubricator Series ; Size 2, 3, 4 or 5 2P NPT: 1P=; 2P=; 3P=; 4P=1/2; 5P=; 6P=1 rain (requires 15 psi min.): = uto drain, float type M = Manual/Pressure differential drain ilter rating - Option: (blank for standard of 5μ for sizes 2, 3 & 4 ; 40μ for size 5) 1 = 5μ; 2 = 25μ; 3 = 40μ Manual drain also opens as inlet pressure is reduced to less than 5 psi. Pressure range for regulator - Option: Blank for standard 5 to 125 psi = 5 to 35 psi S = 5 to 60 psi Gauge - Option: Blank for standard B = Block off plate = NPT adapter plate = NPT adapter plate = Small round gauge with NPT adapter plate G = arge round gauge with NPT adapter plate M = Square embedded MPa scale External imensions - inch (mm) Size Sizes, 4 & 5 5,,, 1 4.6(117) 6.1(154) 7.7(195) 3.0(76) 3.5(88) 3.4(87) 4.8(122) E 1.5(38) 3.1(80) 1.6(41) G 1.8(45) 2.3(58.5) 3.0(77) 3.8(97) H 0.9(24) 1.4(35) J 0.22(5.5) 0.28(7.0) 0.35(9.0) 0.47(12) K 0.33(8.5) 0.43(11) 0.51(13) 0.63(16) 0.2(5) 0.3(7) 0.3(7) 0.4(10) P 2.7(67.5) 4.4(112) B imension Manual rain uto rain loat type 6.5(166) 8.1(205) 10.1(257) 13.0(330) 6.8(172) 8.0(203) 10.0(255) 13.4(340) Page
7 Specifications BO-IR, Inc. ax (352) Web Site: Specifications Series / Model Size 5 Port size NPT,,, 1 Operating media ir Max. operating pressure: psi (MPa) (bar) 145 (1.0) (10) Regulating range: psi (MPa) (bar) Standard: 5 to 125 (0.04 to 0.85) (0.4 to 8.5) Max. flow rate* 28(800) 53(1500) 106(3000) 350(10000) Temperature range 5 to 52 (+23 to 125 ) iltration Standard 5μ 5μ 5μ 40μ Recommended oil Turbine oil (ISO VG32) Exxon Terrestic GT32 or equal Bowl material Polycarbonate onstruction / Regulator Relieving type Weight lb.(kg) 1.3(0.6) 1.7( 0.77 ) 4.2 (1.9 ) 7.0 (3.2) * low SM 102psi (0.7 MPa)(7bar) inlet pressure. ccessories and Mounting See pages 22 & 23. ccessories 5 Round Pressure Gauge GR-1P GR-1P GR-2P GR-2P Square Embedded Gauge GS-P (psi scale) or GS-M (MPa scale) N Standard Interface NS2 NS3 NS4 NS5 T Ported Interface NT2-1P, NT2-2P NT3-1P, NT3-2P NT4-2P, NT4-3P N ock Out/Tag Out Valve T2-1P, T2-2P T3-2P, T3-3P T4-4P, T4-5P N Sleeve Valve SV-2P SV-2P; SV-3P SV-4P N Mounting -Type Mounting Bracket MB2 MB3 MB4 MB5 T-Type Mounting Bracket MBT2 MBT3 MBT4 MBT5 Round gauge requires gauge adapter plate #G-1P (for NPT) or #G-2P (for NPT). Pricing - Effective 9/1/11 Port NPT 1/2 1 Manual drain -1PM -2PM -2PM -3PM -4PM -5PM 5-5PM 5-6PM $ Manual drain also opens as inlet pressure is reduced to less than 5 psi. No charge for optional filter ratings, pressure ranges, or gauges. uto drain -1P -2P -2P -3P -4P -5P 5-5P 5-6P Replacement Parts See page 23. ilter Element: 5μ, 25μ & 40μ omplete Bowl w/uto rain omplete Bowl w/manual rain Bowl only for fi lter Bowl Guard for ilter or ubricator Regulator iaphragm Regulator Knob ubricator Bowl ubricator Pickup Tube (w/fi lter when applicable) ubricator djuster w/sight dome included ubricator Plug for ill Port $ low haracteristics - Inlet pressure = 102 psi Pressure haracteristics Set point conditions: Inlet pressure = 102 psi; Outlet pressure = 29 psi; low rate = 0.7 SM Page 7
8 ilter/regulator ombo with Mist Separator and T Type Mounting Bracket ilter/regulator ombo with Mist Separator features square embedded outlet pressure gauge with psi scale (145 psi = 1.0 MPa = 10 bar) and one T Type mounting bracket. T Type mounting bracket. SEE PROUT PREUTIONS ON PGES 17, 19 N 21. 5μ ilter How to Order escription: ilter/regulator ombo, Mist Separator Series ; Size 2, 3 or 4 M 2P M NPT: 1P=; 2P=; 3P=; 4P=1/2; 5P= rain (requires 15 psi min.): = uto drain, float type M = Manual/Pressure differential drain Manual drain also opens as inlet pressure is reduced to less than 5 psi. Pressure range for regulator - Option: Blank for standard 5 to 125 psi = 5 to 35 psi S = 5 to 60 psi Gauge - Option: Blank for standard B = Block off plate = NPT adapter plate = NPT adapter plate 1μ Mist Separator = Small round gauge with NPT adapter plate G = arge round gauge with NPT adapter plate M = Square embedded MPa scale External imensions - inch (mm) Size Sizes & 4,, 4.6(117) 6.1(154) 3.0(76) 3.5(88) 3.4(87) E 1.5(38) 1.6(41) G 1.8(45) 2.3(58.5) 3.0(77) H 0.9(24) 1.4(35) J 0.22(5.5) 0.28(7.0) 0.35(9.0) K 0.33(8.5) 0.43(11) 0.51(13) 0.2(5) 0.3(7) 0.3(7) P 2.7(67.5) B imension Manual rain uto rain loat type 6.5(166) 8.1(205) 10.1(257) 6.8(172) 8.0(203) 10.0(255) Page
9 Specifications Specifications Series / Model Size Port size NPT,, Operating media ir Max. operating pressure: psi (MPa) (bar) 145 (1.0) (10) Regulating range: psi (MPa) (bar) Standard: 5 to 125 (0.04 to 0.85) (0.4 to 8.5) Max. flow rate* 5.3(150) 11.6(330) 28(800) Temperature range 5 to 52 (+23 to 125 ) iltration Standard: 1μm Bowl material Polycarbonate onstruction / Regulator Relieving type Weight lb.(kg) 1.0(0.45) 1.7( 0.75) 3.3(1.5 ) * low SM 102psi (0.7 MPa)(7bar) inlet pressure. ccessories and Mounting See pages 22 & 23. ccessories Round Pressure Gauge GR-1P GR-1P GR-2P Square Embedded Gauge GS-P (psi scale) or GS-M (MPa scale) Standard Interface NS2 NS3 NS4 T Ported Interface NT2-1P, NT2-2P NT3-1P, NT3-2P NT4-2P, NT4-3P ock Out/Tag Out Valve T2-1P, T2-2P T3-2P, T3-3P T4-4P, T4-5P Sleeve Valve SV-2P SV-2P; SV-3P SV-4P Mounting -Type Mounting Bracket MB2 MB3 MB4 T-Type Mounting Bracket MBT2 MBT3 MBT4 Round gauge requires gauge adapter plate #G-1P (for NPT) or #G-2P (for NPT). Pricing - Effective 9/1/11 Port NPT 1/2 Manual drain -M1PM -M2PM -M2PM -M3PM -M4PM -M5PM $ uto drain -M1P -M2P -M2P -M3P -M4P -M5P $ Manual drain also opens as inlet pressure is reduced to less than 5 psi. No charge for optional pressure ranges or gauges. Replacement Parts See page 23. ilter Element: 1μ, 5μ, 25μ & 40μ omplete Bowl w/uto rain omplete Bowl w/manual rain Bowl only for ilter / Mist Separator Bowl Guard for ilter / Mist Separator Regulator iaphragm Regulator Knob Page 9
10 ilter - Regulator with T Type Mounting Bracket BO-IR, Inc N.E. 49th venue Gainesville, Tel (352) ilter with Regulator features square embedded outlet pressure gauge with psi scale (145 psi =1.0 MPa = 10 bar) and one T Type mounting bracket. T Type mounting bracket. SEE PROUT PREUTIONS ON PGES 17, 19 N 21. How to Order escription: ilter with Regulator Series ; Size 2, 3, 4 or 5 R 5P M Pressure range for regulator - Option: Blank for standard 5 to 125 psi = 5 to 35 psi S = 5 to 60 psi NPT: 1P=; 2P=; 3P=; 4P=1/2; 5P=; 6P=1 rain (requires 15 psi min.): = uto drain, float type M = Manual/Pressure differential drain ilter rating - Option: (blank for standard of 5μ for sizes 2, 3 & 4 ; 40μ for size 5) 1 = 5μ; 2 = 25μ; 3 = 40μ Manual drain also opens as inlet pressure is reduced to less than 5 psi. Gauge - Option: Blank for standard B = Block off plate = NPT adapter plate = NPT adapter plate = Small round gauge with NPT adapter plate G = arge round gauge with NPT adapter plate M = Square embedded MPa scale External imensions - inch (mm) Size Sizes, 4 & 5 5,,, 1 4.6(117) 6.1(154) 7.3(186) 0.7(17) 1.7(43) E 1.5(38) 3.3(84) 1.6(41) G 1.8(45) 2.3(58.5) 3.0(77) 3.7(93) H 0.9(24) 1.4(35) J 0.22(5.5) 0.28(7.0) 0.35(9.0) 0.47(12) K 0.33(8.5) 0.43(11) 0.51(13) 0.63(16) 0.2(5) 0.3(7) 0.3(7) 0.4(10) P 2.7(67.5) 4.5(115) R 0.6(16) 0.4(11) 0.5(14) 0.6(16) B imension Manual rain 4.4(110) 5.8(148) 8.0(202) 10.6(270) uto rain loat type 4.3(108) 4.5(115) 8.4(213) 10.6(270) Page
11 Specifications BO-IR, Inc. ax (352) Web Site: Specifications Series / Model Size 5 Port size NPT,,, 1 Operating media ir Max. operating pressure: psi (MPa) (bar) 145 (1.0) (10) Regulating range: psi (MPa) (bar) Standard: 5 to 125 (0.04 to 0.85) (0.4 to 8.5) Max. flow rate* 28(800) 53(1500) 106(3000) 350(10000) Temperature range 5 to 52 (+23 to 125 ) iltration Standard 5μ 5μ 5μ 40μ Recommended oil Turbine oil (ISO VG32) Exxon Terrestic GT32 or equal Bowl material Polycarbonate onstruction / Regulator Relieving type Weight lb.(kg) 0.9(0.4) 1.4( 0.65 ) 2.9 (1.3) 5.4 (2.45) Pricing - Effective 9/1/11 Port NPT 1/2 1 Manual drain -R1PM -R2PM -R2PM -R3PM -R4PM -R5PM 5-R5PM 5-R6PM $ Manual drain also opens as inlet pressure is reduced to less than 5 psi. No charge for optional filter ratings, pressure ranges, or gauges. uto drain -R1P -R2P -R2P -R3P -R4P -R5P 5-R5P 5-R6P $ * low SM 102psi (0.7 MPa)(7bar) inlet pressure. ccessories and Mounting See pages 22 & 23. ccessories 5 Round Pressure Gauge GR-1P GR-1P GR-2P GR-2P Square Embedded Gauge GS-P (psi scale) or GS-M (MPa scale) N Standard Interface NS2 NS3 NS4 NS5 T Ported Interface NT2-1P, NT2-2P NT3-1P, NT3-2P NT4-2P, NT4-3P N ock Out/Tag Out Valve T2-1P, T2-2P T3-2P, T3-3P T4-4P, T4-5P N Sleeve Valve SV-2P SV-2P; SV-3P SV-4P N Mounting -Type Mounting Bracket MB2 MB3 MB4 MB5 T-Type Mounting Bracket MBT2 MBT3 MBT4 MBT5 Round gauge requires gauge adapter plate #G-1P (for NPT) or #G-2P (for NPT). Replacement Parts See page 23. ilter Element: 5μ, 25μ & 40μ omplete Bowl w/uto rain omplete Bowl w/manual rain Bowl Only for ilter Bowl Guard for ilter Regulator iaphragm Regulator Knob low haracteristics - Inlet pressure = 102 psi Pressure haracteristics Set point conditions: Inlet pressure = 102 psi; Outlet pressure = 29 psi; low rate = 0.7 SM Page 11
12 ilter - Mist Separator - Regulator with two Type Mounting Brackets BO-IR, Inc N.E. 49th venue Gainesville, Tel (352) T Ported Interface available - see page 22 -Type mounting brackets Standard Interface available - see page 22 ilter, Mist Separator, Regulator features square embedded outlet pressure gauge with psi scale (145 psi =1.0 MPa = 10 bar) and two Type mounting brackets. 5μ ilter SEE PROUT PREUTIONS ON PGES 17, 19 N 21. How to Order escription: ilter, Mist Separator, Regulator Series ; Size 2, 3 or 4 MR 4P 1μ Mist Separator NPT: 1P=; 2P=; 3P=; 4P=1/2; 5P= rain (requires 15 psi min.): = uto drain, float type M = Manual/Pressure differential drain Pressure range for regulator - Option: Blank for standard 5 to 125 psi = 5 to 35 psi S = 5 to 60 psi Manual drain also opens as inlet pressure is reduced to less than 5 psi. Gauge - Option: Blank for standard B = Block off plate = NPT adapter plate = NPT adapter plate = Small round gauge with NPT adapter plate G = arge round gauge with NPT adapter plate M = Square embedded MPa scale External imensions - inch (mm) Size Sizes & 4,, 5.5(140) 7.1(181) 9.4(238) 0.7(17) E 1.5(38) 1.6(41) G 2.5(64) 3.3(84) H 0.9(24) 1.4(35) J 0.22(5.5) 0.28(7.0) 0.35(9.0) K 0.33(8.5) 0.43(11) 0.51(13) 0.2(5) 0.3(7) 0.3(7) P 2.7(67.5) B imension Manual uto rain rain loat type 4.3(110) 4.2(108) 5.8(148) 6.1(155) 8.0(202) 8.4(213) Page
13 Specifications BO-IR, Inc. ax (352) Web Site: Specifications Series / Model Size Port size NPT,, Operating media ir Max. operating pressure: psi (MPa) (bar) 145 (1.0) (10) Regulating range: psi (MPa) (bar) Standard: 5 to 125 (0.04 to 0.85) (0.4 to 8.5) Max. fl ow rate* 7(200) 15.8(450) 38.8(1100) Temperature range 5 to 52 (+23 to 125 ) iltration Standard: 1μ Bowl material Polycarbonate onstruction / Regulator Relieving type Weight lb.(kg) 0.66(0.3) 1.1(0.5) 2.2(1.0) * low SM 102psi (0.7 MPa)(7bar) inlet pressure. ccessories and Mounting See pages 22 & 23. ccessories Round Pressure Gauge GR-1P GR-1P GR-2P Square Embedded Gauge GS-P (psi scale) or GS-M (MPa scale) Standard Interface NS2 NS3 NS4 T Ported Interface NT2-1P, NT2-2P NT3-1P, NT3-2P NT4-2P, NT4-3P ock Out/Tag Out Valve T2-1P, T2-2P T3-2P, T3-3P T4-4P, T4-5P Sleeve Valve SV-2P SV-2P; SV-3P SV-4P Mounting -Type Mounting Bracket MB2 MB3 MB4 T-Type Mounting Bracket MBT2 MBT3 MBT4 Note: Round gauge requires gauge adapter plate #G-1P (for NPT) or #G-2P (for NPT). Pricing - Effective 9/1/11 Port NPT 1/2 Manual drain -MR1PM -MR2PM -MR2PM -MR3PM -MR4PM -MR5PM $ uto drain -MR1P -MR2P -MR2P -MR3P -MR4P -MR5P $ Manual drain also opens as inlet pressure is reduced to less than 5 psi. No charge for optional pressure ranges or gauges. Replacement Parts See page 23. ilter Element: 1μ, 5μ, 25μ & 40μ omplete Bowl w/uto rain omplete Bowl w/manual rain Bowl only for ilter / Mist Separator Bowl Guard for ilter / Mist Separator Regulator iaphragm Regulator Knob Page 13
14 ilter / Regulator ombo with MBR Type Mounting Bracket BO-IR, Inc N.E. 49th venue Gainesville, Tel (352) Steel mounting bracket and panel nut included SEE PROUT PREUTIONS ON PGES 17, 19 N 21. ilter/regulator combo units feature square embedded outlet pressure gauge with psi scale (145 psi =1.0 MPa = 10 bar) and one MBR Type mounting bracket. How to Order escription: ilter/regulator ombo Series ; Size 2, 3, 4 or 5 2P Pressure range for regulator - Option: Blank for standard 5 to 125 psi = 5 to 35 psi S = 5 to 60 psi NPT: 1P=; 2P=; 3P=; 4P=1/2; 5P=; 6P=1 rain (requires 15 psi min.): = uto drain, float type M = Manual/Pressure differential drain ilter rating - Option: (blank for standard of 5μ for sizes 2, 3 & 4 ; 40μ for size 5) 1 = 5μ; 2 = 25μ; 3 = 40μ Manual drain also opens as inlet pressure is reduced to less than 5 psi. Gauge - Option: Blank for standard B = Block off plate = NPT adapter plate = NPT adapter plate = Small round gauge with NPT adapter plate G = arge round gauge with NPT adapter plate M = Square embedded MPa scale External imensions - inch (mm) Size Sizes, 4 & 5 5,,, 1 3.0(76) 3.5(88) 3.4(87) 4.7(120) E 1.5(38) 3.0(75) 1.6(41) 2.0(51) G 1.02(26) 1.34(34) 1.65(42) 1.75(44.5) H 1.8(45) 1.8(46) 2.1(54) 2.5(63) J.21(5.4).26(6.5).33(8.5).26(6.5) K.53(13.4).49(12.5).81(20.5).61(15.5) 1.8(45) 2.2(55) 2.6(67) M P B imension Manual rain 6.5(166) 8.1(205) 10.1(257) 13.0(330) uto rain loat type 6.8(172) 8.0(203) 10.0(255) 13.4(340) Page
15 Specifications BO-IR, Inc. ax (352) Web Site: Specifications Series / Model Size 5 Port size NPT,,, 1 Operating media ir Max. operating pressure: psi (MPa) (bar) 145 (1.0) (10) Regulating range: psi (MPa) (bar) Standard: 5 to 125 (0.04 to 0.85) (0.4 to 8.5) Max. flow rate* 28(800) 53(1500) 106(3000) 350(10000) Temperature range 5 to 52 (+23 to 125 ) iltration Standard 5μ 5μ 5μ 40μ Recommended oil Turbine oil (ISO VG32) Exxon Terrestic GT32 or equal Bowl material Polycarbonate onstruction / Regulator Relieving type Weight lb.(kg) 0.6(0.26) 1.0(0.44) 2.2(1.0) 3.7(1.7) * low SM 102psi (0.7 MPa)(7bar) inlet pressure. ccessories and Mounting See pages 22 & 23. ccessories 5 Round Pressure Gauge GR-1P GR-1P GR-2P GR-2P Square Embedded Gauge GS-P (psi scale) or GS-M (MPa scale) N Standard Interface NS2 NS3 NS4 NS5 T Ported Interface NT2-1P, NT2-2P NT3-1P, NT3-2P NT4-2P, NT4-3P N ock Out/Tag Out Valve T2-1P, T2-2P T3-2P, T3-3P T4-4P, T4-5P N Sleeve Valve SV-2P SV-2P; SV-3P SV-4P N Mounting MBR Mounting Bracket MBR2 MBR3 MBR4 MBR5 Note: Round gauge requires gauge adapter plate #G-1P (for NPT) or #G-2P (for NPT). Pricing - Effective 9/1/11 Port NPT 1/2 1 Manual drain -1PM -2PM -2PM -3PM -4PM -5PM 5-5PM 5-6PM $ Manual drain also opens as inlet pressure is reduced to less than 5 psi. No charge for optional filter ratings, pressure ranges, or gauges. Replacement Parts See page 23. ilter Element: 5μ, 25μ & 40μ omplete Bowl w/uto rain omplete Bowl w/manual rain Bowl Only for ilter Bowl Guard for ilter Regulator iaphragm Regulator Knob uto drain -1P -2P -2P -3P -4P -5P 5-5P 5-6P $ low haracteristics - Inlet pressure = 102 psi Pressure haracteristics Set point conditions: Inlet pressure = 102 psi; Outlet pressure = 29 psi; low rate = 0.7 SM Page 15
16 ilter and Mist Separator BO-IR, Inc N.E. 49th venue Gainesville, Tel (352) μ ilter (40μ for size 5) 1μ Mist Separator Order Mounting Brackets and Interface Blocks separately. See pages 22 and 23. SEE PROUT PREUTIONS ON PGE 17. Plastic bowl guards are standard for all models. Polycarbonate bowls are standard for all models. How to Order Series ; Size 2, 3, 4 or 5 4P NPT: 1P=; 2P=; 3P=; 4P=1/2; 5P=; 6P=1 escription: = ilter (5μ standard for sizes 2, 3 & 4; 40μ for size 5) M = Mist Separator (1μ standard for sizes 2, 3 & 4 only) ilter rating ilter - Option: (leave blank for standard); 1 = 5μ; 2 = 25μ; 3 = 40μ Mist Separator (leave blank) rain (requires 15 psi min): = uto drain, float type M = Manual/Pressure differential drain (Manual drain also opens as inlet pressure is reduced to less than 5 psi.) ilter Pricing - Effective 9/1/11 Port NPT Manual drain -1PM $ PM PM PM /2-4PM PM PM PM No charge for optional filter ratings. uto drain -1P -2P -2P -3P -4P -5P 5-5P 5-6P $ Mist Separator Pricing - Effective 9/1/11 Port NPT 1/2 Manual drain -M1PM -M2PM -M2PM -M3PM -M4PM -M5PM $ Manual drain also opens as inlet pressure is reduced to less than 5 psi. uto drain -M1P -M2P -M2P -M3P -M4P -M5P $ External imensions inch (mm) Size Sizes & 4 Size 5 5,,, 1 B imension Manual uto rain rain loat type 4.3(110) 5.1(130) 7.2(184) 11.2(285.5) 4.2(108) 5.4(138) 7.2(184) 11.2(284) 0.4(11) 0.6(14) 0.7(18) 0.9(24) E 0.7(17) 0.6(16) 0.7(17) 0.9(23) 1.6(41) G 1.0(26) 1.7(42) 2.1(54) H 0.9(22) 0.9(23) 1.0(26) 1.4(35) J 0.21(5.4) 0.26(6.5) 0.33(8.5) 0.33(8.5) K 0.53(13.4) 0.49(12.5) 0.81(20.5) 0.47(12.0) 1.8(45) 3.0(76) M P 1.8(46) 2.4(62) Page
17 Specifications - Precautions BO-IR, Inc. ax (352) Web Site: Specifications Series / Model Size 5 Port size NPT,,, 1 Operating media ir Max. operating pressure: psi (MPa) (bar) 145 (1.0) (10) Max. flow rate* ilter 53(1500) 127(3600) 204(5800) 420(12000) Mist Separator 7(200) 15(450) 38(1100) N Temperature range 5 to 52 (23 to 125 ) iltration Standard 5μ 5μ 5μ 40μ Bowl material Polycarbonate Bowl apacity cc Weight lb.(kg) 0.2(0.1) 0.5(0.2) 0.9(0.4) 2.1(1.0) * low SM 102 psi (0.7 MPa)(7bar) inlet pressure. ccessories and Mounting See pages 22 & 23. ccessories 5 Standard Interface NS2 NS3 NS4 NS5 T Ported Interface NT2-1P, NT2-2P NT3-1P, NT3-2P NT4-2P, NT4-3P N ock Out/Tag Out Valve T2-1P, T2-2P T3-2P, T3-3P T4-4P, T4-5P N Sleeve Valve SV-2P SV-2P; SV-3P SV-4P N Mounting MB Mounting Bracket MB2 MB3 MB4 MB5 Replacement Parts See page 23. ilter Element: 1μ, 5μ, 25μ & 40μ omplete Bowl w/uto rain omplete Bowl w/manual rain Bowl Only for ilter / Mist Separator Bowl Guard for ilter / Mist Separator ilter low haracteristics - Inlet pressure = P1 (See specifi cation chart for mist separator maximum fl ow rate.) Product Precautions! aution ir Supply 1. This product is specifi cally designed for compressed air service, and use with any other fl uid (liquid or gas) is a misapplication. or example, use with or injection of certain hazardous liquids or gasses into the system (such as alcohol or liquid petroleum gas) could be harmful to the unit or result in a combustible condition or hazardous external leakage. Manufacturer s warranties are void in the event of misapplication and manufacturer assumes no responsibility for any resulting loss. 2. Install an air fi lter as a preliminary fi lter on the inlet side of the mist separator to prevent unwanted clogging. 3. Supply and outlet connections must be made to ports marked IN, OUT or marked with directional symbols. 4. Some compressor oils, cleaners, chemicals, solvents, paints and fumes will attack plastic bowls and may cause plastic bowl failure. Inspect bowls frequently to detect crazing, cracking, damage or deterioration. Immediately replace any crazed, cracked, damaged or deteriorated bowls. 5. o not install on a compressed air line where the compressor is lubricated with, or the air contains, a material that will attack plastic bowls. 6. Vibration during transit of new equipment may loosen the filter and/or lubricator bowls. heck to be certain the bowls and guards are completely locked into position before pressurizing the unit.! aution 1. Install this unit ahead of equipment that requires fi ltered air. 2. Install unit in a vertical position with fi lter bowl at bottom. 3. The mist separator should be installed in a pulsation-free location. ifferential pressure greater than 15 psi may cause damage to this item and other downstream components. 4. o not use for pressures lower than rated..r.. unit has its own minimum operating pressure determined by the equipment and is designed specifically to function with compressed air. If used below the minimum operating pressure, a loss of performance and breakdown may occur. 5. o not allow air fl ow more than rated fl ow. If the air fl ow is permitted outside the range of rated fl ow, even momentarily, drainage and fi ltered contaminants may splash through the outlet and may cause damage to this item and other downstream components.! Warning Installation Maintenance 1. E-PRESSURIZE UNIT BEORE TTEMPTING TO REMOVE NY OMPONENT, GUR OR BOW. 2. Replace the fi lter element every 2 years or when the pressure differential approaches 15 psi, whichever comes fi rst, to prevent damage to the element. 3. Replace all bowl guards and lock securely before pressurizing Page 17
18 Regulator with MBR Type Mounting Bracket BO-IR, Inc N.E. 49th venue Gainesville, Tel (352) Steel MBR type mounting bracket and panel nut included SEE PROUT PREUTIONS ON PGE 19. Regulators feature square embedded outlet pressure gauge with psi scale (145 psi =1.0 MPa = 10 bar) and one MBR Type mounting bracket and panel nut. Gauge for size 5 is round NPT thread (bar and psi scale). Orange stripe shows when knob is pulled away from housing allowing knob rotation to make outlet pressure adjustments. How to Order Series ; Size 2, 3, 4 or 5 R escription: Regulator 2P NPT: 1P=; 2P=; 3P=; 4P=1/2; 5P=; 6P=1 Pressure range for regulator - Option: Blank for standard 5 to 125 psi = 5 to 35 psi S = 5 to 60 psi Gauge - Option: Blank for standard B = Block off plate = NPT adapter plate = NPT adapter plate = Small round gauge with NPT adapter plate G = arge round gauge with NPT adapter plate M = Square embedded MPa scale External imensions inch (mm) Size 1.32(33.5 mm) ia. Panel Hole Required Pricing - Effective 9/1/11 Size (52.3 mm) ia. Panel Hole Required Port NPT 1/2 1 $ R1P -R2P -R2P -R3P -R4P -R5P 5-R5P 5-R6P No charge for optional pressure ranges or gauges. Sizes & (42.5 mm) ia. Panel Hole Required 5,,, 1 B 3.7(93) 4.7(120) 5.0(127) 6.7(169) 0.6(14) 1.7(43) 2.3(57.5) 3.4(87) E 1.5(38) 3.3(84) 1.6(41) 2.0(51) G 1.02(26) 1.34(34) 1.65(42) 1.75(44.5) H 1.9(48) 1.8(46) 2.1(54) 2.6(65.8) J.21(5.4).26(6.5).33(8.5).26(6.5) K.53(13.4).49(12.5).81(20.5).61(15.5) 1.8(45) 2.2(55) 2.6(67) M.13(3.2) Panel Hole N 1.32(33.5) 1.68(42.5) 1.68(42.5) 2.06(52.3) Page
19 Specifications - Precautions Product Precautions! aution Installation 1. This product is specifi cally designed for compressed air service, and use with any other fluid (liquid or gas) is a misapplication. or example, use with or injection of certain hazardous liquids or gasses into the system (such as alcohol or liquid petroleum gas) could be harmful to the unit or result in a combustible condition or hazardous external leakage. Manufacturer s warranties are void in the event of misapplication and manufacturer assumes no responsibility for any resulting loss. 2. ontaminants in the compressed air stream must be fi ltered and drained with a suitable component before reaching this regulator product. 3. Install the component that is the same pipe size as the line on which it is to be mounted. o not use fi ttings that may restrict air fl ow. 4. Supply and outlet connections must be made to ports marked IN, OUT or marked with directional symbols. 5. Unit must be mounted with adjusting knob in vertical attitude either up or down. 6. Install this unit ahead of equipment that requires regulated pressure. 7. When using in combination with a lubricator, always install this regulator before the lubricator. Specifications Series / Model Size 5 Port size NPT,,, 1 Operating media ir Max. operating pressure: psi (MPa) (bar) 145 (1.0) (10) Regulating range: psi (MPa) (bar) Standard 5 to 125 (0.04 to 0.85) (0.4 to 8.5) Max. flow rate* 28(800) 53(1500) 106(3000) 350(10000) Temperature range 5 to 52 (+23 to 125 ) onstruction Relieving type Weight lb.(kg) 0.4(0.2) 0.7(0.33) 1.9(0.85) 2.7(1.2) * low SM 102 psi (0.7 MPa)(7bar) inlet pressure.! Warning djustment 1. djust the regulator while monitoring inlet and outlet pressure gauges. Turning the knob beyond reasonable resistance may damage internal parts. 2. The regulator is intended to be adjusted manually. o not use tools on the regulator knob as this can cause damage.! aution Pull the regulator knob to unlock. (Orange stripe will appear in the gap.) Make sure the knob is unlocked before adjusting the pressure and lock it after setting the pressure. ailure to unlock or lock may damage the knob or other parts and the outlet pressure may vary from expected settings. Push the regulator pressure knob to lock. If the knob is not easily locked, adjust it left or right slightly and then push to lock. (The orange stripe will be covered when the knob is locked.) Replacement Parts See page 23. Regulator diaphragm Regulator knob Spring: 5 to 125 psi Spring: 5 to 35 psi Spring: 5 to 60 psi Mounting See page 22. Size 5 Mounting Bracket MBR2 MBR3 MBR4 MBR5 ccessories See pages 22 & 23 for Interfaces, 3-Way Sleeve Valves, ock Out/Tag Out Valves, Gauges and block off plates. low haracteristics - Inlet pressure = 102 psi Pressure haracteristics Set point conditions: Inlet pressure = 102 psi; Outlet pressure = 29 psi; low rate = 0.7 SM Page 19
20 ubricator BO-IR, Inc N.E. 49th venue Gainesville, Tel (352) Order Mounting Brackets and Interface Blocks separately. See pages 22 and 23. SEE PROUT PREUTIONS ON PGE 21. How to Order Series ; Size 2, 3, 4 or 5 escription: ubricator 3P NPT: 1P= 2P= 3P= 4P=1/2 5P= 6P=1 Pricing - Effective 9/1/11 External imensions - inch (mm) 1/2 1-1P -2P -2P -3P -4P -5P 5-5P 5-6P $ Size Sizes 5 Sizes & 4 5,,, 1 B 4.9(125) 5.9(150) 7.9(200) 9.8(250) 1.6 (40) 1.7(44) 1.9(48) 1.6(41) 1.6(41) G 1.0(26) 1.7(42) 2.1(54) H 0.9(22) 0.9(23) 1.0(26) 1.4(35) J 0.21(5.4) 0.26(6.5) 0.33(8.5) 0.33(8.5) K 0.53(13.4) 0.49(12.5) 0.81(20.5) 0.47(12.0) 1.8(45) 3.0(76) M P 1.8(46) 2.4(62) Page
21 Specifications - Precautions BO-IR, Inc. ax (352) service@fabco-air.com Web Site: Specifications Series / Model Size 5 Port size NPT,,, 1 Operating media ir Max. operating pressure: psi (MPa) (bar) 145 (1.0) (10) Min. dripping fl ow rate: SM(PM) 0.5(15) :1.0(30) 1.7(50) 6.7(190) :1.4(40) Temperature range 5 to 52 (+23 to 125 ) Recommended oil Turbine oil (ISO VG32) Exxon Terrestic GT32 or equal Bowl material Polycarbonate Weight lb.(kg) 0.4(0.18) 0.5 (0.22) 1.1(0.5) 2.4(1.1) Replacement Parts See page 23. ubricator bowl Bowl guard ubricator pick up tube ubricator adjuster ubricator Plug for fi ll port ccessories & Mounting See pages 22 and 23. ccessories 5 Standard Interface NS2 NS3 NS4 NS5 T Ported Interface NT2-1P, NT2-2P NT3-1P, NT3-2P NT4-2P, NT4-3P N ock Out/Tag Out Valve T2-1P, T2-2P T3-2P, T3-3P T4-4P, T4-5P N Sleeve Valve SV-2P SV-2P; SV-3P SV-4P N Mounting MB Mounting Bracket MB2 MB3 MB4 MB5 low haracteristics - Inlet pressure = P1 Product Precautions! Warning Installation 1. This product is specifi cally designed for compressed air service, and use with any other fluid (liquid or gas) is a misapplication. or example, use with or injection of certain hazardous liquids or gasses into the system (such as alcohol or liquid petroleum gas could be harmful to the unit or result in a combustible condition or hazardous external leakage. Manufacturer s warranties are void in the event of misapplication and manufacturer assumes no responsibility for any resulting loss. 2. ontaminants in the compressed air stream must be filtered and drained with a suitable component before reaching this lubricator product. 3. Install as close as possible to the equipment which is to be lubricated. Be sure lubricator is accessible for easy filling. 4. Supply and outlet connections must be made to ports marked IN, OUT or marked with directional symbols. 5. Install the same size unit as the pipe in use. void using fittings, couplings, etc., that restrict airflow. 6. Vibration during transit of new equipment may loosen the fi lter and/or lubricator bowls. heck to be certain the bowls and guards are completely locked into position before pressurizing the unit. 7. ill lubricator prior to pressurization by pouring oil into the bowl through the fill port. 8. Pressure must be disconnected from the lubricator and downstream air must be vented before removing the fill plug. Replenish the supply of lubricator oil through the fill port to the indicated level. 9. USE EN, NON-ETERGENT OI, preferably SE 10 or lighter, such as Exxon Terrestic GT32 or equal. The rate of oil delivery may be controlled by turning the adjusting screw counter clockwise for more and clockwise for less oil. Once set, the variable orifice in the lubricator will maintain the same ratio of oil to air flow regardless of any change in the airflow rate. Maintenance! Warning 1. BEORE SERVIING THIS UNIT RE PROUT PREUTIONS ON PGES 17, 19 N 21. Note the special warning information that applies to plastic bowls 2. E-PRESSURIZE UNIT BEORE TTEMPTING TO REMOVE NY OMPONENT, GUR OR BOW. 3. Inspect plastic bowls daily to detect crazing, cracking, damage or other deterioration. Immediately replace any crazed, cracked, damaged or deteriorated bowls. 4. Periodically remove the adjusting screw and clean the needle and the seat in the body by blowing off with an air blow gun. 5. If siphon tube is equipped with a filter, occasionally clean the filter by blowing off with an air blow gun. 6. rain off any contaminants which collect in the bottom of the bowl. 7. Replace all bowl guards before pressurizing Page 21
22 ccessories imension units are inch(mm) BO-IR, Inc N.E. 49th venue Gainesville, Tel (352) Standard Interface T Interface Size Part No. NS2 NS3 NS4 NS5 $ (10) 0.43(11) 0.55(14) 0.59(15) Size Port NPT Part No. NT2-1P NT2-2P NT3-1P NT3-2P NT4-2P NT4-3P $ (10) 0.39(10) 0.43(11) 0.43(11) 0.55(14) 0.55(14) B 0.75(19) 0.75(19) 0.75(19) 0.75(19) 0.94(24) 0.94(24) 1.14(29) 1.14(29) 1.30(33) 1.30(33) 1.54(39) 1.54(39) Mounting Bracket MB Type Mounting Bracket MBT Type Size Part No. MB2 MB3 MB4 MB5 $ Part No. MBT2 MBT3 MBT4 MBT5 $ (24) 1.38(35) 1.57(40) 1.97(50) B.59(15).63(16).87(22).94(24).22(5.5).28(7).35(9).47(12).33(8.5).43(11).59(13).63(16) E 1.18(30) 1.61(41) 1.97(50) 2.76(70).20(5).28(7).28(7).39(10) G.39(10).43(11).55(14).59(15) 1.30(33) 1.77(45) 1.97(50) 2.46(62.5) Mounting Bracket for ilters & ubricators Screws included Size Part No. MB2 MB3 MB4 MB5 $ (33.5) 1.54(39) 1.85(47) 2.16(55) 1.06(27) 1.26(32) 1.50(38) 1.77(45) 0.55(14) 0.75(19) 0.79(20) 0.67(17) G 1.02(26) 1.34(34) 1.65(42) 2.13(54) J 0.21(5.4) 0.26(6.5) 0.33(8.5) 0.33(8.5) K 0.53(13.4) 0.49(12.5) 0.81(20.5) 0.47(12) 1.77(45) 2.09(53) 2.76(70) 3.00(76) M X 0.74(18.8) 0.89(22.5) 1.14(29) 0.99(25.2) Y 1.02(26) 1.38(35) 1.85(47) 2.36(60) Z.18(4.5).18(4.5).22(5.5).26(6.5) Mounting Bracket for ilter/regulators & Regulators Size Part No. MBR2 MBR3 MBR4 MBR5 $ (25.5) 0.89(22.5) 1.08(27.5) 0.98(25).75(19).59(15).73(18.5).71(18) 1.18(30) 1.61(41) 1.97(50) 2.00(51) G 1.02(26) 1.34(34) 1.65(42) 1.75(44.5) J.21(5.4).26(6.5).33(8.5).26(6.5) K.53(13.4).49(12.5).81(20.5).61(15.5) 1.77(45) 2.17(55) 2.76(70) 2.64(67) M N 1.30(33) 1.65(42) 1.65(42) 2.05(52) X 2.05(52) 2.70(68.5) 3.15(80) 3.33(84.5) Z.87(22) 1.08(27.5) 1.18(30) 1.32(33.5) Page
23 Pressure Gauge (Square Embedded) ccessories / Replacement Parts imension units are inch(mm) BO-IR, Inc. ax (352) service@fabco-air.com Web Site: Round Pressure Gauge (Requires adapter plate) enter back male thread with dual scale bar & psi Scale psi MPa Part No. GS-P GS-M $ Port Part No. GR-1P GR-2P ØB $ (37) (42) 1.61(40.8) 1.75(44.5) imensions.94(23.8).96(24.5) E.39(10).47(12) Square.47(12).55(14) Gauge dapter Plate (Required for round gauge) Gauge Port Block Off (When no gauge needed) Regulator Mounting Nuts NPT Part No. G-1P G-2P $ Part No. G-XP $4.20 Size 2 3 & 4 5 Part No. -N -N 5-N $ Way ock-out / Tag-out Valve onnect to R components with NPT port or interface items. 3-Way Slide Valve Releases downstream air quickly and easily. onnect to R component with NPT port. Padlock hole ir slot vent faces downstream to release air pressure from components for maintenance, etc. Male NPT ØB emale NPT Size Port NPT 1/2 T2-1P T2-2P T3-2P T3-3P T4-4P T4-5P 1.65(42) 1.65(42) 2.00(51) 2.00(51) 2.36(60) 2.36(60) B 1.89(48) 1.89(48) 1.81(46) 1.81(46) 2.28(58) 2.28(58) $ SV-2P SV-3P SV-4P NPT 1/2 emale NPT 2.28(58) 2.26(57.5) 3.61(91.6) Male NPT B 1.02(26) 1.22(31) 1.50(38) 1.26(32) 1.26(32) 1.93(49).41(10.3).39(10).53(13.5) $ Replacement Parts Size Size Size Size 5 escription Part No. Part No. Part No. Part No. ilter Element 1μ 5μ 25μ 40μ omplete Bowl w/uto rain omplete Bowl w/manual rain Bowl only Bowl Guard Regulator iaphragm Regulator Knob ubricator bowl ubricator pick up tube ubricator adjuster ubricator Plug for fill port Page 23
24 BO-IR, Inc N.E. 49 th venue Gainesville, Telephone (352) ax (352) Web Site abco-ir Product atalog ibrary ylinders, Valves & ccessories atalog V9 details Pancake, Square 1, Multi-power, Hi-Power and ongstroke air cylinder lines. escribes valves, air-over-oil tanks, boosters & accessories. Stainless Steel Body ir ylinders atalog SSB-03 Exact interchange in bores from 5/16 to 3, strokes to 32. Popular options includes magnetic piston, non-rotating, and position feedback. Pancake II ylinders atalog Pan2-2 The direct industrial interchange. High strength composite cylinder barrel. 4 popular styles: Standard, Nonrotating, Multi-Power and 3-position. Global Series ir ylinders at. G-15 Widest choice of models and options. eatures non-lube service to 150 psi. Bores 12mm to 100mm Strokes 5mm - 150mm NPT or Metric ports Multi-Power ir Presses atalog P16 etails the powerful line of precision, forcemultiplying air presses. eliver forces to 11,000 pounds. New inear Thrusters Bulletin GB-J02 eatures longer strokes to 10 and 4mm round profi le sensors with surge suppression and polarity protection. ual unction Slides Bulletin E-10 Either of two slide styles (gantry or thruster) can be made from a single set of parts. Users can inventory less parts and assemble styles as needed. Swing lamps Bulletin #S-B04 lamp arm rotates 90 as it extends away from the workpiece. eatures standard magnetic piston. Stopper ylinders Bulletin #ST-IX04 Standard magnetic piston and a wide selection of styles. Roller direction is adjustable. Magnetic sensors can be mounted on body. Pneumatic Grippers atalog GR-8 SPG & PG parallel jaw motion with strokes from to 24 & forces to 402 lbs. GR & GS angular jaw styles with on-the-fl y adjustment. inear Slides atalog # S-03 ine includes 6 families of slides, pick & place units, and thin parts placers. 5/16 to 4 bores. Guide shafts to 1-1/2. NP Interchangeable ir ylinders atalog N-6 ll the desirable NP mounts. Bores from 1-1/2 to 6 ; strokes to 99. luminum or high strength composite cylinder body. Magnetic position sensing. istributed by: Specialty Valves and ontrol Valves Bulletin #14N omposite body solenoid valves in 2 or 3-way, N/O or N/, and manifoldable confi gurations. Process Solenoid valves. 5 Ported, 3 position, NPT 4-way air valves. Page 24
FDXS Series. required at temperatures below 0 C (32 F) None required, or ISO VG32. 0 ~ 5mm Standard with rubber bumper (both sides)
Bulletin FDXS-09 Features 1. Magnetic piston is standard in all sizes. 2. Non-rotating design enables precision positioning. ng. 3. Compact design saves space. 4. Suitable for multi-axis assemblies and
More informationPNEUMATIC ROTARY ACTUATORS
Bulletin FRA.C-09 Prices effective September 1, 2011 PNEUMATIC ROTARY ACTUATORS FRA & FRC Series FRA Series Features 1. Magnetic pistons are standard on all models. 2. Compact design saves space. 3. Rectangular
More informationFKHS Series. 3 Jaw Parallel Motion Pneumatic Grippers. Mounting Hole. Sensor Capable. Bottom tapped holes. Dowel Hole & Slot
Catalog No. KHS- KHS Series Jaw Parallel Motion Pneumatic Grippers Mounting Hole Can be mounted from the gripper side Mounting slot for easy sensor installation Sensor Capable Bottom tapped holes Can be
More informationStainless Steel FRLs
Stainless steel FRLs Stainless Steel FRLs Units 205 Stainless steel FRLs - PF504 Series - 1/4 Inch Ports PF504 Filter Miniature Features Stainless steel construction handles most corrosive environments
More informationPneumatic Valves FVA & FVEC Series
Catalog FVA.E-09 Prices effective May 1, 2012 Pneumatic Valves FVA & FVEC Series 12-16-15 FVA Series AIR PILOT VALVES Features Precision machined, hard anodized aluminum housing 1. Fast acting valves are
More informationWinslow Lube Oil By-Pass Type 1 Filter Service Instructions
Vent Plug (NPT) Winslow Lube Oil y-pass Type 1 ilter Service Instructions Parts List Part escription Part over ssembly and lamp Housing rain Plug ilter lement omponent Kit See Ordering Information on Page
More information1 6 / 2 6 S E R I E S C O M P A C T & S T A N D A R D M O D U L A R A I R P R E P A R A T I O N S Y S T E M S
16/26 SRIS O M P T & S T N R M O U L R I R P R P R T I O N S Y S T M S WILKRSON FILTRS, RGULTORS N LUBRITORS R26 Regulator F26 Filter L26 Lubricator M16 oalescing Filter B6 Filter/Regulator w/ Optional
More informationFRL/AirCare Air Controls & Accessories
FRL/irare ir ontrols & ccessories Lincoln Regulators, Filters & Lubricators well-planned compressed air system ensures minimum pressure loss in the system, and the removal of contaminants: water, compressor
More informationLubricator Series Functional explanation / Dimensions
00E/00E Series Lubricator / utofill type Only installing oil tank enables lubrication to multiple lubricator. : Rc/ to Rc JIS symbol ir uto. drain Specifications escriptions 00E///V 00E/8V ompact lean
More informationF20 & F21 QIX Particulate & Coalescing Filters
F2, F21 Series QIX Filters 1/4, 3/8, 1/2, 3/4 & 1 Inch Ports F2 & F21 QIX Particulate & oalescing Filters Manual rain utomatic rain Unique Interchangeable QIX Inserts llow One Module to ccommodate Port
More informationModel Model 815
Model 600004 Model 600204 Model 85387 Model 600104 Model 815 ir line products and accessories ir couplers and nipples............................... 196 low guns, tire inflators and siphon sprayers.............
More informationWinslow Lube Oil Full-Flow Type 1 Filter Service Instructions
Vent Plug (NPT) Winslow Lube Oil ull-low Type 1 ilter Service Instructions Parts List Part escription Part over ssembly and lamp Housing rain Plug ilter lement omponent Kit See Ordering Information on
More informationBulletin 14CAN Specialty & Control Valves
Bulletin 14C 4-7-06 Specialty & Control Valves Composite Solenoid Valve, 2 & 3-Way ormally Closed or ormally Open Series 38MP The Series 38MP is a 3 or 2 way, 2 position composite body solenoid valve designed
More informationMedium Pressure Valves, Fittings and Tubing Pressures to 21,000 psi
Medium Pressure Valves, ittings and Tubing MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
More informationHow to Order 1 T Z A. r Pressure range. 05 Pressure range 0 to 0.5 MPa 10 Pressure range 0 to 1 MPa 16 Pressure range 0 to 1.6 MPa
oolant Valve Series S External pilot solenoid S ir operated S How to Order 0 0 Y 0 0 T Z q w e r t y u i o!0!!!!! q Series S00 S00 S00 w Valve type ormally closed ormally open e Seal material R FKM r Pressure
More informationCatalog FGYBR-11 NEW PRODUCT. Magnetically Coupled Rodless Cylinders. FGYB & FGYR Series
Catalog FGYBR- NEW PRODUCT Magnetically Coupled Rodless Cylinders FGYB & FGYR Series Series FGYB Basic cylinder mounting See pages 6 & for dimensions and ordering information. Series FGYR Through hole
More informationAir service units filters, regulators and lubricators
filters, regulators and lubricators Legris offers an extensive range of filters, regulators and lubricators, including individual units and combinations. s - eliminate dust and coagulation from compressed
More informationOdor Removal Filter. Model. Note) 1 8, , , , 3 4. Model/Free Standing Type AMF (2B)JIS 10K FF flange
fficiently can remove odor in compressed air with an activated carbon element. The unit is designed for use in the area such as a clean room where odors must be avoided. an remove odor and gas ingredients
More informationHigh Pressure Valves, Fittings and Tubing Pressures to 65,000 psi
igh Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
More informationManufacturers of Premium Pneumatic Controls since 1921 ROSS CONTROLS ROSS CONTROLS ROSS CONTROLS
Manufacturers of Premium Pneumatic Controls since 1921 ROSS CONTROLS ROSS CONTROLS ROSS CONTROLS New Product Introduction 400 PSI High Pressure Regulator Ports: 1/8, 1/4, 3/8 Problem: Most spring activated
More informationFlow Controls & Accessories
Flow ontrols & ccessories Section Flow ontrol Valves SPF Series...2 337 Series...3 3250 Series... 4-5 Right ngle Series... 6-9 Needle Valves SPN Series...10 338 Series...11 SP Series heck Valve...12 339
More informationNEN Series NFPA Aluminum Cylinders
NEN Series NP luminum ylinders 1-1/2" to 4" bore sizes ompetitively priced Magnetic piston standard djustable cushion standard Sleeve nut construction standard Stocked strokes Technical data Medium: iltered
More informationCoolant Valve. VNC Series. Cylinder actuation by pilot air
oolant VN Series ir Operated/xternal Pilot Solenoid [Option] ylinder actuation by pilot air Wide selection of port and variations Threaded type (6 to ) lange type (3 to 80) Low water hammer or details,
More informationMechanical Style Pressure Switch. Specifications
or details about certified products conforming to international standards, visit us at www.smcworld.com. Mechanical Style Pressure Switch Series IS1000 Long service life: 5 million cycles IS1000-01 IS1000-01-X202
More informationACTUATORS GENERAL CATALOG
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG ROTARY ACTUATORS PISTON TYPE SERIES CONTENTS Features 1223 Specifications 1224 Inner Construction, Major Parts and Materials 1226 Order
More informationROD SLIDERS INDEX ACTUATORS GENERAL CATALOG. Characteristics 779. Handling Instructions, and Precautions 783
Presenting our CAD drawing data catalog ACTUATORS GENERAL CATALOG ROD SLIDERS INDEX Characteristics 779 Handling Instructions, and Precautions 783 Standard Cylinders Specifications 785 Order 78 Dimensions
More informationAir Filter Outdoor Series FW4000/FW8000-W Series Outdoor types now developed into a series. Port size: 1/4 to 1 JIS symbol Specifications Description
ir Filter Outdoor Series FW4000/FW8000-W Series Outdoor types now developed into a series. : 1/4 to 1 JIS symbol Specifications FW4000-W FW8000-W Working fluid ompressed air Max. working pressure MPa 1.0
More informationInstrument Ball Valves
www.swagelok.com Instrument all s 40 Series On-off, switching, and crossover flow paths Working pressures up to 3000 psig (206 bar) Temperatures from 50 to 150 (10 to 65 ) Low-temperature service option
More informationCatalog. Product Catalog. Setting a new standard for: Quality Reliability Value Global Compatibility
atalog Product atalog Setting a new standard for: Quality Reliability Value Global ompatibility Table of ontents 3- Valves 3 irect Acting Solenoid Valves (M3V) 4-5 3-Way Solenoid Valves (M3V) 6-7 4-Way
More informationAir Filter. Best Pneumatics 4. Equipment. Air Line
est Pneumatics Air Filter Air Filter: AF000 to 6000 P..- Mist Separator: AFM000/000/00 P..-6 Micro Mist Separator: AF000/000/00 P..-9 Large Flow Air Filter: AF00/0 P..- Air Line Equipment.-0 Modular Style
More informationIndustrial Cylinder Products Hydraulic and Pneumatic Cylinders. Catalog (01/11)
Industrial ylinder Products Hydraulic and Pneumatic ylinders atalog 00- (0/) Pneumatic ylinders Index Page Series, Heavy Duty, 0 P.S.I. ccessories - vailable Mountings and Specifications ushion Data -
More informationAir Service Units Filter pressure regulator + Lubricator - Size 1. Series Technical characteristics. Construction and working characteristics
ir Service Units Filter pressure regulator + Lubricator - Size Series 00 Construction and working characteristics - Zinc alloy body or reinforced technopolymer body with threaded brass insert connections.
More informationCompact direct acting precision regulator
direct acting precision Components preparation and pressure adjustment / unit CONTENTS Product introduction 6 Safety precautions 62 Discrete (RJB500) 624 Block manifold (MNRJB500) 626 Block configurations
More information/ Air Line Kit AL - M1203BS2 / OPERATION MANUAL. P1 - P8 / English P11 - P18 OM-K0652
/ Air Line Kit AL - M1203BS2 / OPERATION MANUAL P1 - P8 / English P11 - P18 OM-K0652 Thank you for purchasing the Air Line Kit " AL - M1203BS2 ". This Air Line Kit is designed to adjust the air ow supply
More informationPDE2611TCUK-ca Air Preparation. Miniature FRL series. Miniature FRL Series. Parker Hannifin Corporation Pneumatic Division - Europe
P26TUK-ca ir Preparation Miniature RL series Miniature RL Series 49 Parker Hannifin orporation Pneumatic ivision - urope P26TUK-ca ir Preparation Miniature RL series - /8", /4" asic /8" ody 4 ilters -
More informationPort Size. Connection G1/8 G 1/4 G 3/8 G 1/2 G 3/4 G 1. Standard nominal flow rate * 3000 I/min I/min I/min I/min I/min.
1/4-1 MXLOW LTRS Made as per SO 5782-1 standard. igh level of condensate seperation. Sturdy construction in aluminium. asy removal/refixing of bowl owl guard for 3/8" & 1/2" Size offered as a standard
More informationWork supports - Collet-Lok design
ork supports - ollet-ok design Shown: PS-1, PTS-1 Hydraulically locked, mechanically maintained work support ollet-ok products ollet-ok design allows the work support to maintain support position after
More informationL & S Series Linear Slides
& S Series inear Slides asic Selection S Series (short) single bearing block design, short overall length. (Photo this page) Series (long) double bearing block design, increased bearing support. (Photo
More informationAir Control Kit INSTRUCTIONS-PARTS LIST. Table of Contents HIGH VOLUME. 250 psi (1.7 MPa, 17.2 bar) Maximum Air Inlet Pressure
INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. 308 648 Rev. B Supersedes A HIGH VOLUME Air Control Kit 250 psi (.7 MPa, 7.2 bar)
More informationIC3A, IC3D, IC4A and IC4D ISO Spirax-Monnier International Ultraclean Compressed Air Filters
Page 1 of 5 ert. No. LRQ 0963008 Manual rain TI-P501-01 H Issue 5 I3, I3, I4 and I4 ISO 9001 Spirax-Monnier International Ultraclean ompressed ir Filters uto rain International Symbol escription The Spirax-Monnier
More information10 SERIES MODULAR VALVES. Pub. EC-1405
SERIES General Information Mounting Surface : ISO ----, CETOP-, NP-D Up to 5 MPa (363 PSI), 8 L /m in ( U.S.GPM) Pub. EC-5 The modular valves are functional elements with which a hydraulic system can be
More informationQuick-fitting Type Mechanical Valve. Mechanical Valve
Quick-fitting Type Mechanical Valve Mechanical Valve eatures This push-type valve turns on and off the input of air pressure. The operating force is not affected by strength of pressure owing to the spool
More informationNFPA Air Cylinders. Catalog NF-6
NPA Air Cylinders Catalog N-6 NPA Cylinders Cylinder Construction Head and cap are machined from solid aluminum bar stock and black anodized for corrosion resistance. The dimensional interchange to NPA
More informationL1000/L3000/L4000/L8000-W Series
Lubricator standard white Series L1/L3/L4/L8-W Series Supplies fine oil mist. Port size: 1/8 to 1 JIS symbol Specifications Descriptions L1-W L3-W L4-W L8-W Appearance Working fluid Compressed air Max.
More informationStandard Specifications Model. How to Order. Mist spray unit. Recommended Equipment. Mixing valve
Mist Spray Unit Series MU/ Intermittent spray to cutting and press gear chains, etc. Standard Specifications MU MU Inlet air Oil tank set range. MPa. to. MPa Oil tank capacity (cm ) Total capacity: Effective
More information10 VQ F. Nil Latching type: Push-locking type (Tool required) B. Nil. Electrical entry
Series 0-VQ00 port solenoid valve How to Order Valves 0 VQ 0 F ir cylinder Clean series Series VQ Compact port valve Type of actuation Normally closed Note) Normally open Note) Normally open type is available
More informationSeries: hydraulic-type control in pneumatic machinery
Adding Adding the the control, control, rigidity rigidity and and power power of of hydraulics hydraulics to to aa pneumatic pneumatic machine machine Control with Air-Oil Tanks Air-Oil tanks provide a
More informationProduct series extended even more! Non-rotating Type. Offers 3 types of non-rotating operation types. push type cylinders. pull type cylinders
The Pen Cylinder s compactness and easy handling make production lines in a broad range of industries. new release with even lighter weight and more PEN CYLINDERS Product series extended even more! The
More informationADEX Series Air Control Valves A00.01 Cv M3 Port A05.18 Cv M5 Port A12.47 Cv 1/8" Port zpv02 A B C D E F G H. Section H
X Series ir ontrol alves 00.0 v ort 05.8 v 5 ort.47 v /8" ort zpv02 Section www.parker.com/pneu/adex asic alve unctions... 2 asic alve eatures... ommon art umbers / R Type alves... 4 odel umber Index /
More informationPortable Filter Carts. Models 5MFP & 10MFP with Modufl ow and Intelli-Cart
Models 5MFP & 10MFP with Modufl ow and Intelli-Cart 174 Applications Filtering new fluid before putting into service Transferring fluid from drums or storage tanks to system reservoirs Conditioning fluid
More informationAL20-A to AL40-A. How to Order. Description. Rc NPT G 1/8 1/4 3/8 1/2 3/4
ourtesy of /Flodyne/Hydradyne otion ontrol Hydraulic Pneumatic Electrical echanical (8) 426-8 www.cmafh.com IS Symbol w e r t Semi-standard L 3 3 hread type Port size Option (ounting) a b c d Lubricator
More informationGlobal Series Air Cylinders
Global Series Air Cylinders Double Rod Options and Toolplates with interchange hole patterns for GT Series 2x øsp C bores opposite side for P SHCS KP EP KP 4x, GP threads (See pages 40-43) Global Series
More informationMedium Pressure Valves, Fittings and Tubing Pressures to 21,000 22,500 psi (1,500 (1,550 bar)
Medium Valves, ittings Tubing s to 22,00 psi (,00 (,0 bar) MXIMTOR has been designing manufacturing high pressure equipment for more than thirty years has a worldwide reputation for quality reliability,
More informationProduct Information. 36 & RM Series ROSS CONTROLS
Product Information oot Operated Valves 36 & RM Series ROSS CONTROLS Manual Valves Pedal & Treadle Heavy-Duty 36 Series 3-Way 2-Position Valves, Pedal, Spring Return NPT Threads BSPP Threads 1-2 2-3 1/4
More informationALB900 Series. Standard Specifications. Model. Port (Bypass lubrication adapter)
Centralized control of multi-point lubrication Stable oil feeding with a micromist Through the use of a booster, a pressure that is higher than that of the main air passage can be supplied. This difference
More informationSoft Start-up Valve. AV2000/3000/4000/5000 Series
Soft Start-up Valve V000/000/000/000 Series [Option] C- R- W- C R - W - Start-up valve for low speed air supply to gradually raise initial pressure in an air system and for quick exhaust by cutting off
More informationMULTI SLIDERS CONTENTS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG CONTENTS Features 923 Handling Instructions and Precautions 925 Specifications 929 Order Codes 930 Inner Construction 931 Dimensions 932
More informationAir Control Kits INSTRUCTIONS-PARTS LIST. Table of Contents HIGH VOLUME. 250 psi (1.7 MPa, 17.2 bar) Maximum Air Inlet Pressure
INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. 308 722 Rev. A HIGH VOLUME Air Control Kits 250 psi (.7 MPa, 7.2 bar) Maximum
More informationADEX Series. Air Control Valves. Section D
X Series ir ontrol alves 00.0 v.8 v.47 v ort 5 ort /8" ort Section www.parker.com/pneu/adex X iking Z asic alve unctions...00 asic alve eatures...0 ommon art umbers / R Type alves...02 odel umber Index
More informationHEC2003/2004 Series Servo Valve System
BULLETIN 10006 Bul. 5.00 GUIDING SYSTEMS October 2011 HEC2003/2004 Series Servo Valve System High response servo valve with spool position feedback signal All components are mounted over the drip pan Servo
More informationUNLOADING RELIEF VALVES
UNLOADING RELIEF VALVES BUG-6/1 (3/4, 1-1/4) Specifications / Model Number Designation Up to 21 (35 ), L /min (66 ) Pub. E- These valves are used to operate the pumps with minimum load in accumulator circuits
More informationModel 1100 Turbine Flow Meter
Model 1100 Turbine Flow Meter INSTALLATION & INSTRUCTION MANUAL 8635 Washington Avenue Racine, Wisconsin 53406 Tel: 800-433-5263 or 262-639-6770 Fax: 800-245-3569 or 262-639-2267 www.hedland.com TABLE
More informationWARNING. Filter Service. Section Refer to the following pages for timing and procedures of fi lter element replacement.
Section 10-1 Filter Service Effective fi ltration of fl uids is vital to the longevity and performance of your Wagner. See the previous section on Preventive Maintenance for the scheduled intervals for
More informationPower Valve Precision Regulator
Power Valve Precision Regulator VEX Series High precision, large capacity relief regulator port large exhaust capacity pressure reducing valve which utilizes a nozzle flapper mechanism available as air
More informationCatalog 080-/USA Notes Vacuum Control Valves
Vacuum Control Valves Section Catalog 080-/USA Notes Vacuum Control Valves Catalog 080-/USA Index Vacuum Control Valves VA0 Vacuum Control Valves for Centralized Vacuum Systems VA0PSV & VA0PSP, -Port,
More information5.2 to 79 gpm 3000, 3600, 5000 psi
Modular Valve Series Modular Valve Series. to 79 gpm 000, 600, 000 Overview The modular valve is designed and engineered to integrate multiple hydraulic valve operations into a single unit, which eliminates
More informationOptions/Attachments. Part no. For AC30-A For AC30A-A For AC30B-A For AC30C-A For AC30D-A. For AC25-A. For AC25B-A For AC25C-A
ourtesy of M/lodyne/Hydradyne Motion ontrol Hydraulic Pneumatic lectrical Mechanical (800) 426-50 www.cmafh.com Options/ttachments Part No. Section Type Standard 0.02 to 0.2 MPa setting Standard 0.02 to
More informationPneumatic. Prep-Air II 05 Series Air Preparation Units Filter, Regulator, Lubricator, and Modular Accessories Catalog 0708/USA
Prep-ir II 5 Series ir Preparation Units Filter, Regulator, Lubricator, and Modular ccessories atalog 78/US WRNING FILUR OR IMPROPR SLTION OR IMPROPR US OF TH PROUTS N/OR SYSTMS SRI HRIN OR RLT ITMS N
More informationSRX R. Remediation Pumps. Simply Reliable
SRX R Remediation Pumps Simply Reliable The SRX pump is based on a simple, innovative design and built with fi eld-proven components. The result: a reliable pump to meet the demands of your remediation
More information3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length
Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube DQ2 Full stroke First-stage stroke dditional
More informationM1000/M3000/M4000/M8000 Series
il mist filter /000/000/8000 Series or measurement and instrumentation, etc. in oil content inhibited circuit. S symbol T VB. Specifications escriptions 000 000 8000 ppearance Working fluid ompressed air
More informationVNA Application example. 3-port dual pressure, N.C. type SGH. Nozzle SGH. Coolant pump
igh Pressure oolant Valve eries Pa/ orresponding to high speed grinding and long drilling processes oolant valve for high pressure coolant liquid (up to Pa/) that is ideal for lubrication, dust blowing
More informationType C2 Seat Type Solenoid Pilot Valve
Type C Seat Type Solenoid Pilot Valve JIS graphic symbols for hydraulic system T eatures No hydraulic locking occurs even during long periods of pressurized operation Nomenclature 1 3 5 - - - - - 1 3 5
More informationModulating Water Valves and Bulb Wells
Modulating Water Valves and ulb Wells PPLITION: These modulating valves regulate the flow of water to the heat exchanger to maintain a desired exiting oil temperature. They open automatically when temperature
More informationSeries CYP. Clean rodless cylinder ø15, ø32. How to Order
Series Clean rodless cylinder ø15, ø32 How to Order ir cylinder Clean rodless cylinder ore size (mm) 15 32 15 Cylinder bore size 15 15mm 32 32mm TN TF Port type M5 x 0.8 15 c NPT Standard stroke Standard
More informationParker Series 2A Air Cylinder
Parker ir ylinder hen the job calls for reliable, heavy-duty performance, specify. 00,000 psi yield strength chrome-plated, case-hardened piston rod.,000 psi yield strength rod-end stud with rolled threads.
More informationMedium Duty Hydraulic Cylinders Series 3L
Medium Duty Hydraulic ylinders Series L Medium Duty Service Industrial Tie od onstruction Nominal Pressure 000 PSI Depending on ore Size Standard ore Sizes " through " Piston od Diameters /" through -/"
More informationhydraulic power clamps
ourtesy of M/Flodyne/ydradyne Motion ontrol ydraulic Pneumatic lectrical Mechanical (8) 426-548 www.cmafh.com hydraulic power clamps Table of ontents ydraulic lamping 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4
More informationARO-FLO SERIES FILTERS, REGULATORS AND LUBRICATORS
ARO-FLO SERIES FILTERS, REGULATORS AND LUBRICATORS For more than years, Ingersoll Rand ARO has been an industry leader in the design and ARO-Flo Series manufacture of compressors, pneumatic tools, and
More information06 SERIES MODULAR VALVES. Pub. EC-1404
6 SERIES General Information Mounting Surface : ISO -AE-8--A, CETOP-8, NPA-D6 Up to 5 MPa (363 PSI), 5 L /m in (3 U.S.GPM) Pub. EC- The modular valves are functional elements with which a hydraulic system
More informationModel ZW204 Non-Modulating Float Valve
Model Z04 Non-Modulating loat Valve pplication The Zurn ilkins Model Z04 Non-Modulating loat Operated ontrol Valve is designed to be either fully open or fully closed in response to the position of the
More informationHigh Pressure Valves, Fittings and Tubing Pressures to 65,000 psi
igh Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
More informationAir Regulator 100 psi (.7 MPa, 7 bar) Maximum Air Inlet Pressure
INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. 30934 Rev. A Air Regulator 00 psi (.7 MPa, 7
More informationHigh Pressure Valves, Fittings and Tubing Pressures to 65,000 psi (4,500 bar)
igh Pressure Valves, ittings and Tubing Pressures to psi (4,00 bar) MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality
More information5.2 to 79 gpm 3000, 3600, 5000 psi
Modular Valve Series Modular Valve Series. to 79 gpm 000, 600, 000 Overview he modular valve is designed and engineered to integrate multiple hydraulic valve operations into a single unit, which eliminates
More informationF.R.L. unit modular type
F.R.L. unit modular type CKD Corporation CC-8EU-GB BSIC CONCEPT Pursuing high performance for all aspects, functionality, operability, serviceability, and safety. Compressed air filter, regulator, lubricator,
More informationNumatics, Inc. is a leading manufacturer of pneumatic products and motion control products.
Numatics, Inc. is a leading manufacturer of pneumatic products and motion control products. Our broad spectrum of standard, custom developed products and application components have made a significant
More information1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95
1.134 L INEAR A CTUATOR: AIR C YLINDER H O W M ADE I N USA T ECHNICAL T O O R D E R C95 AIR C YLINDERS C95 P ISTON R OD S Basic K Non-Rotating P ISTON - Basic D Magnetic B ORE IN MM 50 63 80 100 B S T
More informationValve Mounted Cylinder. Action Built-in magnet. With air cushion. Double acting. Standard. Nonrotating rod. Standard. rod. Standard. rod.
eries V/MVGQ,,,, 2,,,, 63,, eries Variations eries eries V ction uilt-in magnet With air cushion variations uilt-in One-touch fitting With auto switch With strong scraper Page RE RE X ouble acting -1-
More informationFlow Controls & Accessories
Flow ontrols & ccessories Section V V Flow ontrol Valves SPF Series...2 337 Series...3 3250 Series... 4-5 Miniature Right ngle...6 3251 Series...7 FM701 & FM703 Series...8 F701, F702, FS701 Series...9
More informationAir Valve AIR-PILOTED VALVES
K-UV002 Ver.1.0 ir Valve I-ILOTED VLVES INSTUCTI MNUL Ver.1.0 ir-piloted Valves Features Since the unit requires air piping only, with no need for electrical wiring, it can be handled by a person without
More informationCatalog. Product Catalog. Setting a new standard for: Quality Reliability Value Global Compatibility
atalog Product atalog Setting a new standard for: Quality Reliability Value Global ompatibility Table of ontents 3-20 Valves 3 irect cting Solenoid Valves (M3V) 4-5 3-Way Solenoid Valves (M3V) 6-7 4-Way
More informationOil Management. Temprite Oil Reservoirs. Model Maximum Working Pressure: 44.8 bar (650 PSI) RES7 Oil Reservoir for CO 2
Temprite Oil Reservoirs Model 47154 Maximum Working Pressure: 44.8 bar (650 PSI) 47154 Part # Model # Oil onn. apacity apacity E Sight Glasses 90040000 47154 3/8" SE 4 Gal. 512 oz. 15 Liters 3.5 Gal. 448
More informationSeries VC Direct Operated 2 Port Solenoid Valve for Oil. Series VCL VX VN VQ VDW VC LV PA
Series V irect Operated Port Solenoid Valve for Oil Series V VX VN V VW V V P.-9 Multipurpose Valve for Oil irect Operated Port Solenoid Valve for Oil Series V Kerosene, uel oil class (fuel oil ), Silicone
More informationELECTRO-PNEUMATIC TRANSDUCING REGULATORS CONTENTS ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS.
CCESSORIES GENERL CTLOG IR TRETMENT, UXILIRY, VCUUM, ND FLUORORESIN PRODUCTS ELECTRO-PNEUMTIC TRNSDUCING REGULTORS CONTENTS ETR Series Features, Operation Principle 237 pplication Examples 238 Handling
More information95 Series Inline Directional Control Valves Manufacturers of Premium Pneumatic Controls since 1921
ROSS CONTROLS 9 Series Inline Directional Control Valves Manufacturers of Premium Pneumatic Controls since 9 9 Series Valves INLINE DIRECTIONAL VALVES AND MANIFOLDS KEY FEATURES /-, /- and / way Solenoid
More informationManifold Regulator Modular Type. Regulator for manifold. Body size. Number of stations stations. 10 stations. Standard Specifications
Manifold Regulator Modular Type /3000 Series modular type that can be freely mounted on a manifold station. Optimal for central pressure control. Easily set up using the new knob. lso has a One-touch lock
More informationCOVER. Bendix ATR-6 Antilock. Traction Relay Valves DELIVERY PORTS (6) FIGURE 1 - BENDIX ATR-6 (AND ATR-3 ) ANTILOCK TRACTION RELAY VALVES
SD-13-4861 Bendix ATR-6 and ATR-3 Antilock Traction Relay Valves 2 PIN SOLENOID CONNECTOR Bendix ATR-3 Antilock Traction Relay Valves CONTROL SOLENOID CONTROL PORT COVER Bendix ATR-6 Antilock Traction
More information4-Way, 5-Port, 2 & 3-Position Solenoid and Remote Pilot 1/2" & 3/4" Ports. Technical & Service Data. Pneumatic
atalog VL-UTO-/US (Revised 6/0/0) pplication & Model Selection S utomotive Subbase Valves -Way, -ort, & -osition Solenoid and Remote ilot /" & /" orts pplication ual pressure or diverter valve operation
More informationHYDRAULIC HEAVY DUTY
Catalog #HHD-16 12/16 HYDRAULIC HEAVY DUTY Series HHD 3000 PSI RATED 10-25-16 WARNING IMPROPER SELECTION, IMPROPER USE OR FAILURE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN CAN CAUSE PROPERTY DAMAGE,
More information