Illustrated Parts Manual

Transcription

1 Illustrated Parts Manual Beginning S/N: 60 Effective Date: 00 P/N 000-

2 KEY TO ABBREVIATIONS USED IN THIS MANUAL Abbreviation What it Represents º (Dimension)Degrees (Angle) " (Dimension)inches (-)Negative (Polarity) (+) Positive (Polarity) ATAll-Terrain CCWCounter-clockwise Conn Connector CWClockwise D Diameter DCDeck, Collection (number refers to size in inches) DM Deck, Mulching (number refers to size in inches) DRDeck, Rear Discharge (number refers to size in inches) DSDeck, Side Discharge (number refers to size in inches) DUGarlock (Bearing) ESNA (Fastener)Nylon Insert Locknut FSC Forward Speed Control GA Gauge gal gallon GHSGrass Handling System GR (Fastener)Grade HDHeavy Duty HP Horse Power IDIdentification or Inside Diameter LLength LHLeft Hand (orientated with operator on seat) LP Low Profile mm (Dimension)millimeters MS (Fastener)Machine Screw NS (as part number) Item is not sold by Walker Manufacturing OD Outside Diameter oz ounce PFH (Fastener) Phillips Flat Head P/NPart Number PPH (Fastener)Phillips Pan Head PTH (Fastener)Phillips Truss Head PTO Power Take-Off QKSQuick Slide qtquart RH Right Hand (orientated with operator on seat) SAE (Fastener)Society of Automotive Engineers SBH (Fastener)Socket Button Head (Bolt) SDSide Discharge SFH (Fastener)Slotted Flat Head SHC (Fastener) Socket Head Cap SHL (Fastener) Shoulder (Bolt) SM (Fastener)Sheet Metal (Screw) S/N Serial Number SpgSpring SQH (Fastener)Square Head SS (Fastener) Stainless Steel ST (Fastener)Self-Tapping (Screw) Term Terminal V Volts NOTE: In some instances, combinations of abbreviations may be used (eg PPHMS - Phillips Pan Head Machine Screw) Use only genuine Walker replacement parts

3 ILLUSTRATED PARTS LIST Section of Tractor Covered Page Section of Tractor Covered Page Decals Tractor Decals Body / Chassis Assemblies Body / Chassis Assembly (GHS Models) Rear Body Assembly (GHS Models)6 Body Assembly (SD Models) Tractor Components Main Component Power Transmission (GHS Models)0 (SD Models) Engine Group Air Intake And Exhaust Group6 Radiator Group Hydrostatic Ground Drive Assemblies0 Steering Control Assemblies Throttle Control Assembly Parking Brake Assembly6 GHS Group GHS Powerfil Assembly (00)0 GHS 00 Bushel Catcher Assembly Instrument Panel Assembly Electrical Components Electrical Assembly6 Electrical Assemblies (GHS 00 Bushel Components) Electrical Connectors0 Maintenance Lubrication Points Wiring Schematic Warranty Limited Warranty Use only genuine Walker replacement parts

4 TRACTOR DECALS ITEM PART DESCRIPTION LOCATION NO NO NO NO REQ D GHS REQ D SD Walker Product Decals 600- RH Fender Body, RH Side Near Seat 00 Walker Mower (" Round) Utility Bed (one on each side) 0 6- Made in USA Body 00- Walker (" Round) 00 Bushel Catcher (one on each side) 0 - Decal, Dd Body Danger Decals Warning Decals Caution Decals Warning, Read Manual Body 0- Decal, Hydro Warning Bridge Assembly and LH Gear Axle Drive Assembly Danger, Pinch Point 00 Bushel Catcher Mounting Frame Assembly 0 (one on each side) 600- Danger, Rotating Blower Blades Body, Near Body Chute 0 Maintenance Decals Parking Brake Body, RH Side Below Seat 600- Danger, Body Latch Body, RH Side Below Seat NS Caution (6-0 Kubota) Air Cleaner Cover NS Caution (6- Kubota) Radiator Front Body Closure Rear Cross Member, Body Oil Level Jackshaft Support 6 0- Axle Oil Level Gear Axle Drive Assemblies (one on each) 600- Throttle Body, LH Side 6 PTO Alignment Arrow Universal Joint Tube Assembly NS Sealed Reservoir Hydrostatic Drives (one on each) 0 6 Removable Screen 00 Bushel Catcher Removable Screen 0 NOTE: All parts requiring decals are shipped with decals applied Use only genuine Walker replacement parts

5 TRACTOR DECALS SD Model Decks Parts Manual for Deck Decals GHS Model Decks Parts Manual for Deck Decals Use only genuine Walker replacement parts

6 BODY / CHASSIS ASSEMBLY (GHS MODELS) ITEM PART DESCRIPTION NO NO NO REQ D ITEM PART DESCRIPTION NO NO NO REQ D Seat Assembly 60- Suspension Seat 60- Suspension Seat Mount 0- Shock Mount 60- Shoulder Washer Rear Bumper Assembly (GHS Models Only)* NS Recovery Tank Mount (-0 Kubota) 6 0- Mount Plate 6-0 / 00 Rear Bumper 6- Catcher Pivot Bushing 6 Roller Wheel (" Rubber) 0 - Catcher Pivot Plate Cable Clamp (/) Body Assembly - Cable Clamp ( x /) - Grommet (/6) 60- Harness Clip NS Body ID Plate 6 Rubber Bumper (0 OD x ) Panel Guard - Dome Plug (/) - Dome Plug (/6) 0 6 mm Ball Stud Gas Spring Assembly (Includes Item # 0) Rubber Bumper ( OD x 0) Plastic Tip, Red Extension Spring (/ x ) - Body Latch Hook (-/ Side Bars) 6 - Dome Plug (/) 00- Front Body 0 Edge Molding, Lever Opening - Dome Plug (/) 0 - Dome Plug (/6) Tilt-Up Latch Assembly*** Plastic Tip -0 Spring Arm, Tilt-Up Latch -0 Spring Pivot Bushing - Compression Spring (/ x /) - Mount Angle, LH 6 - Hook, Tilt-Up Latch - Mount Angle, RH Chassis Assembly 6- Retainer Collar (") (Includes Item # F) 0- Pivot Bearing 0 0 Tail Wheel Fork 0- Grease Fitting ( Degree) 0 Nut, Tail Wheel Axle 0- Seal, Outer (-/ x -/) 0- Spacer, Tail Wheel Axle (0 ID x OD) 0 Bearing Cone (/ ID) 6 0- Bearing Race 0 Tail Wheel & Tire ( x 00-6) (With Bearing Race) 0- Tail Wheel Tire ( x 00-6) 06 Tail Wheel & Hub (6 x ) ** ** (Includes Items # 0 & 6) 0-0 Dual Tail Wheel & Tire Assembly ** (Includes Items # - & -) 6- Seal, Reverse Lip 0 Tail Wheel Axle (/ x 0-/) 0 00 Wheel & Tire ( x 0-) 00- Drive Tire ( x 0-) ** 00- Wide Wheel ( x ) ** 00-6 Chassis Frame (-/ Side Bars) Fasteners 0- Keps Nut /-0 Keps Nut 6 F00 /-0 ESNA Nut /6- Whiz Locknut F0 /-6 Keps Nut F0 /-6 Whiz Locknut F0 /-6 ESNA Nut F00 /6- ESNA Nut F0 0- x / PPHMS F06 0- x / PPHMS F0 /-0 x / Hex Bolt F0 /-0 x / Hex Bolt F0 /6- x / Hex Bolt 6 F0 /-6 x Hex Bolt 6 F00 /-6 x -/ Hex Bolt F0 /-6 x -/ Hex Bolt F00 / SAE Washer F0 / SAE Washer F0 / Wave Spring Washer F0 /6- x Hex Bolt F0 /-0 x / PFH Bolt F /-6 x / Hex Bolt F /-0 x -/ Wheel Lug Bolt F / x -/ x /6 Washer F0 /6- x / Set Screw, Knurl Point F06 # x /6 Drive Pin F /6 Split Lock Washer F /6- x -/ Hex Bolt F x x 0 Washer F Coil Roll Pin (/6 x /6) F /6 Conical Washer F /6- x /6 Set Screw F /6- x / SFH Screw * Rear Bumper Assembly for SD Models is not shown here BODY ASSEMBLY (SD MODELS), Page ** Service Part Only *** Complete Tilt-Up Latch Assembly Kit available by ordering kit # Use only genuine Walker replacement parts

7 BODY / CHASSIS ASSEMBLY (GHS MODELS) Electrical Assembly F0 6 F0 F0 F0 F F0 F0 F F00 F0 F F0 F0 GHS Group F06 6 F06 F0 F0 6 F F F 0 6 F0 F F0 0 F0 F0 F0 F0 F0 F F F F0 F0 F 6 F0 6 F0 F0 F F0 F0 F0 F00 F06 F F0 6 F F 0 F F 0 6 Electrical Assembly F 6 6 F0 Use only genuine Walker replacement parts

8 REAR BODY ASSEMBLY (GHS MODELS) ITEM PART DESCRIPTION NO NO NO REQ D ITEM PART DESCRIPTION NO NO NO REQ D Rear Body Assembly (GHS Models) - Catcher Handle Plate, LH - Catcher Handle Plate, RH 6- Catcher Support Frame, Insulation Foam Pad, RH 0- Insulation Foam Pad, LH 6 6 mm Ball Stud Gas Spring Assembly (Includes Item # 6) Rubber Bumper (0 x ) 0- Rear Body Panel Fasteners 0- Keps Nut 6 /-0 Keps Nut /6- Whiz Locknut F0 0- x / PPHMS 6 F0 /-0 x / Hex Bolt F0 /-0 x / Hex Bolt F / x Fender Washer F0 /-0 x / Carriage Bolt NOTE: Rear Bumper Assembly for GHS Models is not shown here BODY / CHASSIS ASSEMBLY (GHS MODELS), Page 6 Use only genuine Walker replacement parts

9 REAR BODY ASSEMBLY (GHS MODELS) GHS 00 Bushel Catcher Assembly F0 F0 F F0 F0 F0 6 Body / Chassis Assembly (GHS Models) 6 Use only genuine Walker replacement parts

10 BODY ASSEMBLY (SD MODELS) ITEM PART DESCRIPTION NO NO NO REQ D ITEM PART DESCRIPTION NO NO NO REQ D Utility Bed Assembly 60-0 Bed Liner ( x ) 60- Utility Bed (Includes Item # ) 0- Insulation Foam Pad, RH 0- Insulation Foam Pad, LH Rear Bumper Assembly (SD Models) - Cover Plate 6 Rubber Bumper (0 x ) 6 mm Ball Stud Gas Spring Assembly (Includes Item # ) - Rear Bumper 0 NS Recovery Tank Mount (-0 Kubota) 0- Mount Plate Cable Clamp (/) 6 Roller Wheel (" Rubber) 0- Rear Body Panel Fasteners 0- Keps Nut /-0 Keps Nut /6- Whiz Locknut F0 /-6 Keps Nut 6 F0 /-6 Whiz Locknut F0 /-6 ESNA Nut F0 0- x / PPHMS 6 F06 0- x / PPHMS F0 /-6 x Hex Bolt 6 F00 /-6 x -/ Hex Bolt F0 /-6 x -/ Hex Bolt F0 / SAE Washer F0 / Wave Spring Washer F0 /-0 x / PFH Bolt F 0- x / PTHMS NOTE: BODY / CHASSIS ASSEMBLY (GHS MODELS), Page for all common parts used on both models Use only genuine Walker replacement parts

11 600- BODY ASSEMBLY (SD MODELS) F00 F0 F0 F0 F0 0 F0 6 F0 F0 F0 F0 F F0 F0 F06 F0 F0 F0 Body / Chassis Assembly (GHS Models) Body / Chassis Assembly (GHS Models) Use only genuine Walker replacement parts

12 MAIN COMPONENT POWER TRANSMISSION (GHS MODELS) ITEM PART DESCRIPTION NO NO NO REQ D ITEM PART DESCRIPTION NO NO NO REQ D Clutch Lever Assembly 0 Grease Fitting Extension Spring (/ x -/) Clutch Idler Pulley 6- PTO Belt Tightener ( TAB) 0- Fiberglide Bearing Inner Race (-/) 0- Clutch Actuator Block 0- Grease Fitting ( Degree) 6 Compression Spring (/ x -/) 0 0 Knuckle Joint 0- Clutch Actuator Rod Pivot Bearing (/6 x /6) Clutch Lever (Includes Items # & ) 0 Handle Grip PTO Drive Shaft Assembly 00- Dipstick, Gearbox 6 - Brake Band Guide 00- PTO Gearbox / Flange Pulley Ground Drive Belt, Micro-V - Quick Coupler Installation Tool ** 0-6 Universal Joint Tube Assembly / Spline 0- Brake Band (-/) 6- PTO Drive Pulley (-//V) (Includes Items # F6 & F6) -0 Engine Pulley (Flywheel Mount) (Includes Item # F) 0 Engine PTO Belt 6 Drive Belt (VX) Jackshaft Assembly 6 0- Jackshaft Drive Pulley (/V) (Includes Items # F06 & F) 6 Bearing with Collar (/) Jackshaft (/ x -/) - Hydro Jackshaft Mount - Hydro Jackshaft Mount Assembly * (Includes Items #,, - & ) 0 Retainer Washer (/ x -/) 0- Inner Race (-/) -0 Idler Arm - Extension Spring (/ x ) 6- Spacer Bushing (/6) Idler Pulley (") 6 - Transmission Drive Pulley (-/MV) (Includes Items # F06 & F) 0 Ground Drive Release Assembly - Idler Pulley (/ Groove) Ground Drive Release Arm 0 Idler Arm Guide Handle Grip, Red 6 Handle, Ground Drive Release (Includes Item # 0) Extension Spring (/ x ) Plastic Tip, Red Spring Arm, Ground Drive Idler Release (Includes Item # ) Compression Spring (/6 x /) Fasteners 0- Keps Nut /-0 Keps Nut F00 /-0 ESNA Nut /6- Whiz Locknut F0 /-6 Keps Nut F0 /-6 Whiz Locknut F0 /-0 x / Hex Bolt F0 /-6 x -/ Hex Bolt F0 /-6 x -/ Hex Bolt F0 /-6 x -/ Hex Bolt F00 / SAE Washer F060 AN606 Washer F06 / Internal Star Lock Washer F06 /6 x /6 x Key F06 / x / Cotter Pin F0 /-6 x Hex Bolt F6 /-0 x -/ Hex Bolt F6 /6- Hex Nut F6 /6 Split Lock Washer F /6- x / Set Screw F / x Fender Washer F /-0 x -/ Hex Bolt F M x x 6 PFH Bolt F6 /6- x / Hex Bolt F /- x / SFH Cap Screw F 0- x / PFHMS F /6- x -/ Hex Bolt F /6- x Hex Bolt F /6- ESNA Jam Nut * Service Part Only ** The Quick Coupler Installation Tool is used to assist the installation of the Quick Coupler Tube and PTO Shaft connection by holding the disconnect ring in the retracted position when joined to the tractor spline shaft on the PTO gearbox Use only genuine Walker replacement parts

13 MAIN COMPONENT POWER TRANSMISSION (GHS MODELS) F F F F0 F 0 F6 F00 F0 0 F F060 F F F0 F060 F F0 F6 6 F F06 F0 F0 F0 F6 F6 6 F6 F6 GHS Group F06 GHS Group F00 Hydrostatic Ground Drive Assemblies 0 6 F F06 F06 Hydrostatic Ground Drive Assemblies F Hydrostatic Ground Drive Assemblies Engine Group 0 6 F0 F0 F0 F0 Body / Chassis Assembly (GHS Models) F6 F6 Use only genuine Walker replacement parts

14 MAIN COMPONENT POWER TRANSMISSION (SD MODELS) ITEM PART DESCRIPTION NO NO NO REQ D ITEM PART DESCRIPTION NO NO NO REQ D Clutch Lever Assembly 0 Grease Fitting Extension Spring (/ x -/) Clutch Idler Pulley 6- PTO Belt Tightener ( TAB) 0- Fiberglide Bearing Inner Race (-/) 0- Clutch Actuator Block 0- Grease Fitting ( Degree) 6 Compression Spring (/ x -/) 0 0 Knuckle Joint 0- Clutch Actuator Rod Pivot Bearing (/6 x /6) Clutch Lever (Includes Items # & ) 0 Handle Grip PTO Drive Shaft Assembly 00- Dipstick, Gearbox 6 - Brake Band Guide 00- PTO Gearbox / Flange Pulley Ground Drive Belt, Micro-V - Quick Coupler Installation Tool ** 0-6 Universal Joint Tube Assembly / Spline 0- Brake Band (-/) 6- PTO Drive Pulley (-//V) (Includes Items # F6 & F6) -0 Engine Pulley (Flywheel Mount) (Includes Item # F) 0 Engine PTO Belt 6 Drive Belt (VX) Jackshaft Assembly 6 0- Jackshaft Drive Pulley (/V) (Includes Items # F06 & F) 6 Bearing with Collar (/) Jackshaft (/ x -/) - Hydro Jackshaft Mount - Hydro Jackshaft Mount Assembly * (Includes Items #,, - & ) 0 Retainer Washer (/ x -/) 0- Inner Race (-/) -0 Idler Arm - Extension Spring (/ x ) 6- Spacer Bushing (/6) Idler Pulley (") 6-6 Idler Pulley Spring Mount Cable Clamp (/ x /) - Transmission Drive Pulley (-/MV) (Includes Items # F06 & F) Starter Relay Mount Ground Drive Release Assembly 0 - Idler Pulley (/ Groove) Ground Drive Release Arm 0 Idler Arm Guide 06- Handle Grip, Red 6 Handle, Ground Drive Release (Includes Item # ) Extension Spring (/ x ) 6 Plastic Tip, Red Spring Arm, Ground Drive Idler Release (Includes Item # 6) Compression Spring (/6 x /) Fasteners 0- Keps Nut /-0 Keps Nut F00 /-0 ESNA Nut /6- Whiz Locknut F0 /-6 Keps Nut F0 /-6 Whiz Locknut F0 /-0 x / Hex Bolt F0 /-6 x -/ Hex Bolt F0 /-6 x -/ Hex Bolt F0 /-6 x -/ Hex Bolt F00 / SAE Washer F060 AN606 Washer F06 / Internal Star Lock Washer F06 /6 x /6 x Key F06 / x / Cotter Pin F00 /-0 x -/ Hex Bolt F0 /-6 x Hex Bolt F6 /-0 x -/ Hex Bolt F6 /6- Hex Nut F6 /6 Split Lock Washer F /6- x / Set Screw F / x Fender Washer F /-0 x -/ Hex Bolt F M x x 6 PFH Bolt F6 /6- x / Hex Bolt F /- x / SFH Cap Screw F 0- x / PFHMS F /6- x -/ Hex Bolt F /6- x Hex Bolt F /6- ESNA Jam Nut * Service Part Only ** The Quick Coupler Installation Tool is used to assist the installation of the Quick Coupler Tube and PTO Shaft connection by holding the disconnect ring in the retracted position when joined to the tractor spline shaft on the PTO gearbox Use only genuine Walker replacement parts

15 MAIN COMPONENT POWER TRANSMISSION (SD MODELS) F F F F0 F 0 6 F6 F00 F0 0 F F F F060 F0 F060 F F0 F6 F0 F0 F F06 F0 6 F6 F6 6 F6 F6 F06 F00 Hydrostatic Ground Drive Assemblies 0 F 6 F06 F06 Hydrostatic Ground Drive Assemblies F00 F Hydrostatic Ground Drive Assemblies Engine Group F0 0 F0 F0 F00 6 F0 Body / Chassis Assembly (GHS Models) F6 F6 Use only genuine Walker replacement parts

16 ENGINE GROUP ITEM PART DESCRIPTION NO NO NO REQ D ITEM PART DESCRIPTION NO NO NO REQ D Engine Assembly - Actuating Solenoid 0- Inline Ball Joint - Solenoid Mount 0- Solenoid Linkage Rod NS Kubota Diesel Engine (D Kubota) 6 Throttle Cable Mount Bracket - Cable Tie (0# x ") Fuel Tank Assembly Cable Clamp (/) 0- Tank Tube (") 0 - Hose Clamp (/) M Fuel Line (/ x 6-/) ** Cable Clamp (/ x /) M Fuel Line (/6 x ) ** - Hose Clamp, Silver (/6) 0- Hose Clamp (/ to /) 6 6 M Fuel Line (/6 x -/) ** NS Fuel Filter (0-00 Kubota) M Fuel Line (/6 x -/) ** 0 Fuel Filter (-60 Kubota) 0 Splash Guard 0 Trash Guard M Fuel Line (/6 x -/) ** NS Fuel Pump (6-0 Kubota) 00 Fuel Filter (In-Line) 06- Hose (/ x 6) Fuel Filter, In Tank 06- Fuel Tank, Gallon, Diesel 0- Fuel Tank Cap, Diesel * 0- Bushing, Rubber * Fuel Return Tube Fasteners 0- Keps Nut F00 /- Hex Nut /-0 Keps Nut /6- Whiz Locknut F0 0- x / PPHMS F0 0- x / PPHMS F0 /-0 x / Hex Bolt 6 F0 /-0 x / Hex Bolt F0 /-0 x / Hex Bolt F00 / SAE Washer F0 /6 Ext Star Lock Washer F06 / Internal Star Lock Washer F06 / x / Cotter Pin F0 A/A66D Aluminum Pop Rivet F0 /6- x / Hex Bolt F / x / x / Washer F /6- x -/ Hex Bolt F M x x Hex Bolt * Service Part Only ** Required hose specifications: M - /" ID fuel/oil/vapor hose (Gates -00 or equivalent) M - /6" ID fuel/oil/vapor hose (Gates -00 or equivalent) M - /6" ID low permeation (<g/m^/day) fuel hose (Parker 0 or equivalent) NOTE: ELECTRICAL CONNECTORS, Page 0 for identification of all Electrical Wiring Service Parts NOTE: Decals for this assembly are not shown here TRACTOR DECALS, Page for Decal listing and placement information Use only genuine Walker replacement parts

17 ENGINE GROUP Air Intake And Exhaust Group F0 F0 Air Intake And Exhaust Group 0 F0 F00 F0 F F06 F00 0 F F0 6 F0 F0 6 F F0 0 0 F0 F0 Electrical Assembly F06 6 F0 F0 Body / Chassis Assembly (GHS Models) F0 F06 F0 Use only genuine Walker replacement parts

18 AIR INTAKE AND EXHAUST GROUP ITEM PART DESCRIPTION NO NO NO REQ D ITEM PART DESCRIPTION NO NO NO REQ D Precleaner Assembly 06- Remote Precleaner (Includes Item # ) 0- Hose Clamp (-/ to ) 0- Precleaner Tube, -/ / GHS 0 Shock Mount (0 OD x /) 0-0 Rear Precleaner Mount 6 0 Elbow, Precleaner 0- Air Cleaner Assembly * (Includes Items # -, 6 & ) 0- Air Cleaner Band 00- Safety Filter Insert Air Cleaner Cartridge 0- Air Cleaner Draw Latch 0- Air Cleaner Cap 00- Vacuator Valve 06 Air Intake Hose 0 Hose Clamp (-/ to -/) 6 0- Street Elbow 0 (/ x /) 0-0 / Pipe Thread Male W/Barb M Vacuum Hose (") Δ 0- Air Flow Indicator W/Bracket (Vacuum 0" HO) 0 0- Tube Support Arm Exhaust Assembly - Exhaust Manifold Shield NS Spring Washer (0-000 Kubota) -6 Engine Brace (Includes Items # 0, & F0) NS Muffler (6-0 Kubota) NS Muffler Gasket (-0 Kubota) 6 0 Spacer, Muffler Motor Mount 06- Water Temperature Sender 06- Temperature Sender Adapter Oil Pressure Switch 0 Oil Filter (- Kubota) 0- Manifold Heat Shield 0- Tail Pipe Fasteners 0- Keps Nut /6- Whiz Locknut * F0 /-6 Keps Nut ** F0 0- x / PPHMS F0 /-6 x Hex Bolt ** F0 /6- x / Hex Bolt F /6- Hex Nut F /6 Split Lock Washer F /6- x -/ Hex Bolt (GHS Models use only ) F6 /6- x / Hex Bolt F /6- x -/ Hex Bolt *** F M0 Split Lock Washer F M x x Bolt, GR F /6- x -/ Hex Bolt * F M0 x x 0 Hex Bolt F M x x GR Hex Bolt F - Nylock Nut F - x / PPHMS * Two () and two () F fasteners are reused from Clutch Lever Assembly MAIN COMPONENT POWER TRANSMISSION (GHS OR SD MODELS), Pages 0 or ** One () F0 and one () F0 fastener are reused from Rear Bumper Assembly BODY / CHASSIS ASSEMBLY (GHS MODELS), Page *** GHS Models Only Δ Required hose specifications: M - /6" ID automotive vacuum hose NOTE: Decals for this assembly are not shown here TRACTOR DECALS, Page for Decal listing and placement information 6 Use only genuine Walker replacement parts

19 AIR INTAKE AND EXHAUST GROUP F0 F0 F0 6 0 F0 F F6 0 F F F 6 F0 6 0 F F0 F0 F F F Engine Group F F F (GHS Models Only) Body / Chassis Assembly (GHS Models) Use only genuine Walker replacement parts

20 RADIATOR GROUP ITEM PART DESCRIPTION NO NO NO REQ D ITEM PART DESCRIPTION NO NO NO REQ D Radiator Assembly 0- Hose Clamp (/ to -/) 0- Upper Radiator Hose 0- Hose Clamp (/ to -/) - Fan Mount Tab, LH -6 Radiator Cooling Fan 6 - Radiator Fan Shroud NS Recovery Tank Hose Clamp (0-0 Kubota) M0 Recovery Tank Hose ** NS Coolant Recovery Tank and Hose (0-00 Kubota) 0 - Cable Tie (0# x ") - Radiator Cap * Radiator - Radiator Channel Seal (/ x / x ) Radiator Brace Shock Mount (00 OD x ) 6 - Radiator Screen 6 Screen Channel - Fan Blade Replacement * (Includes Items # F0, F, F, F & F) 0 Radiator Guard 0 Retainer Washer (/ x -/) Washer (/ x -/ x /) - Debris Shield, Shroud - Fan Mount Tab, RH 0- Lower Radiator Hose Fasteners /-0 Keps Nut 6 F0 /-6 ESNA Nut F0 /-0 x / Hex Bolt F0 /-0 x / Hex Bolt F06 / Internal Star Lock Washer F0 / x Fender Washer F0 Belleville Washer, SS * F00 /-0 x -/ Hex Bolt F 0- x / PTHMS F 0- x / Whiz Lock Bolt * F Thrust Washer * F Spring Ring F Fender Washer * * * Service Part Only ** Required hose specifications: M0 - /" ID EDM Hose NOTE: Decals for this assembly are not shown here TRACTOR DECALS, Page for Decal listing and placement information Use only genuine Walker replacement parts

21 RADIATOR GROUP Engine Group Body / Chassis Assembly (GHS Models) F F0 F06 6 F 0 Body / Chassis Assembly (GHS Models) F06 F0 F06 F0 F06 F0 6 F0 F0 Body / Chassis Assembly (GHS Models) F00 F06 F00 F0 0 F0 F0 Use only genuine Walker replacement parts

22 HYDROSTATIC GROUND DRIVE ASSEMBLIES ITEM PART DESCRIPTION NO NO NO REQ D ITEM PART DESCRIPTION NO NO NO REQ D Transmission Lockout Assembly 0- Transmission Lockout Assembly * (Includes Items # -, F0, F0 & F0) Plastic Tip 0 Lockout Cam (Includes Item # F0) 0- Lockout Lever 0- Lockout Mount ** Ground Drive Assemblies Bridge Assembly Cable Clamp (/) - Throttle Cable Mount Bracket 6- Hydro Fan, CW 0 0 Hydrostatic Drive, CCW (00-0) 606- Air Vent Valve * 600- Gear Axle Drive Assembly (Includes Items # & ) 60- Pipe Plug (/ NPTF) 6 Cable Retainer (Uses existing bolt on Gear Axle Drive Assembly) 6- Pinion Gear 6 6 Spacer, Pinion Gear 60 O-Ring Seal Hydro Pulley (-//MV) (Includes Items # F06 & F) 6- Hydro Fan, CCW 0 06 Hydrostatic Drive, CW (00-0) Deck Support Arm Assemblies 60-0 Outboard Mount, LH 6- Deck Support Arm, LH (Includes Item # 6) - Hitch Pin (# 6) 6- Deck Support Arm, RH (Includes Item # 6) 60- Outboard Mount, RH 6 0 Grease Fitting 60- Support Arm Bushing (-/6) Transmission Repair Parts 0- Input Shaft * 0- Bearing, Input Shaft * 0 0- Snap Ring * 0- Seal, Input Shaft * 0 Reservoir to Casting Gasket * 0 Reservoir Cap and Gasket * 0 Transmission Reservoir Kit * 0- Rubber Bladder * O-Ring & Plug Assembly * 0- Seal, Control Shaft * Fasteners F0 /-6 Keps Nut F0 0- ESNA Nut F06 0- x / PPHMS F0 0- x / PPHMS F06 /-0 x / SBH Screw F0 /-6 x Hex Bolt F00 /-6 x -/ Hex Bolt F0 /-6 x Hex Bolt F0 /6 Internal Star Lock Washer F06 / Internal Star Lock Washer 6 F06 / x / Woodruff Key (#) F0 A/AD Aluminum Pop Rivet F60 External Snap Ring (66 Shaft) F / x Fender Washer F /6 x -/ x / Washer F00 /6-0 x Grade Bolt F /6-0 x / Hex Bolt F6 /-6 x Hex Bolt All Thread F /6- x /6 Set Screw (Unbrako Knurl Point) * Service Part Only ** Part not used on Jackshaft side of tractor 0 Use only genuine Walker replacement parts

23 HYDROSTATIC GROUND DRIVE ASSEMBLIES F0 F F0 0 F06 F0 F06 F06 F6 Main Component Power Transmission (GHS Models) F6 F0 F06 F0 F0 F0 F60 F F0 6 F06 F06 F F F06 F F F F06 F F06 0 F00 F0 6 F00 F F 6 6 F06 F60 F06 F0 F0 F F06 F0 F00 Use only genuine Walker replacement parts

24 STEERING CONTROL ASSEMBLIES ITEM PART DESCRIPTION NO NO NO REQ D ITEM PART DESCRIPTION NO NO NO REQ D Transmission Spring Assemblies 60- Shock Mount Gear Drive, RH 6 0mm Ball Stud 6- Steering Lever Dampener Assembly 60- Shock Mount Gear Drive, LH - Ball Joint (/6-) Nylon Lined 6 6- Transmission Control Arm, LH - Control Rod (6") 66- Compression Spring (-/) 6- Steering Lever Actuator 0 0- Fiberglide Bearing /" - Control Rod (-/") Transmission Control Arm, RH Steering Lever & FSC Assemblies FSC Actuator Rod Bearing, Delrin ( ID x OD x 0) - FSC Actuator Cam 6 0 Grease Fitting 6 FSC Friction Washer (-/ x / x /6) 0- FSC Friction Body (Includes Item # 6) - FSC Key W/Stop 0- FSC Control Assembly * (Includes Items # -, F & F) 0 0- Handle Grip, Foam (-/) Extension Spring (/ x -/) 0 D-Clip - Steering Lever Support Pivot Pin, Steering Lever -0 Steering Lever Assembly, LH / Adjustable (Includes Items #, 0, 6, F60 & F) - Steering Lever Arm, LH / Adjustable * 6-0 Steering Lever Handle, Adjustable (Includes Items # 0 & F) Extension Spring (/ x 6-/) 0 Clevis (/") - Clevis Pin (/ x 00) 0 0- Speed Control Stop 0-0 Steering Lever Assembly, RH / Adjustable (Includes Items #, 0, 6, F60 & F) 0- Steering Lever Arm, RH / Adjustable * 6 FSC Knob 0 FSC Lever Assembly (Includes Item # 6) - Cable Tie (0# x ") Fasteners F00 /- Hex Nut /-0 Keps Nut 6 F00 /6- Jam Nut F00 /6- Keps Nut /6- Whiz Locknut F00 /6- ESNA Nut F0 /6- Jam Nut F0 /-0 x / Hex Bolt F0 /-0 x / Hex Bolt F0 /6- x / Hex Bolt F00 / SAE Washer F0 / SAE Washer F06 / x / Woodruff Key (#) F06 / x Cotter Pin F06 / x / Cotter Pin F0 /6- x Hex Bolt F x 00 x 0 Washer F6 /6 x / Cotter Pin F /-0 Self-Locking Nut F /- Self-Locking Nut F / Belleville Spring Washer F 0 x 6 x 00 Washer, SS F /-6 ESNA LP Nut F /-0 x 0 Knurled Bolt F60 /-0 x / Hex Bolt F0 0 x x 00 Washer F Washer / x / x 00 * Service Part Only Use only genuine Walker replacement parts

25 STEERING CONTROL ASSEMBLIES Hydrostatic Ground Drive Assemblies Electrical Assembly F0 6 Hydrostatic Ground Drive Assemblies F0 0 6 F F60 F0 F 0 6 F F F F00 F0 F F0 F00 F6 F0 F F F0 F00 F00 6 F00 F06 F0 6 6 F06 F06 F0 F F 0 F F F 6 F0 F06 F0 F F00 F00 0 F F60 Use only genuine Walker replacement parts

26 THROTTLE CONTROL ASSEMBLY ITEM PART DESCRIPTION NO NO NO REQ D ITEM PART DESCRIPTION NO NO NO REQ D Throttle Control Assembly Cable Clamp (/) 0 Throttle Cable NS 0- Jam Nut 0 Ball Joint (0-) 0- Control Lock Tab Friction Washer () 0- Control Lever, Throttle 0- Throttle Control Knob, Red 0- Friction Washer (06) 0 0- Control Bracket 0 Control Assembly * (Includes Items # -,, 0 & F0) Throttle Control and Cable Assembly * (Complete Control and Cable Assembly) (Includes Items #,,, & F) Fasteners 0- Keps Nut F00 /-0 ESNA Nut F0 0- x / PPHMS F0 / Belleville Spring Washer F 0- Keps Nut * Service Part Only NOTE: Decals for this assembly are not shown here TRACTOR DECALS, Page for Decal listing and placement information Use only genuine Walker replacement parts

27 THROTTLE CONTROL ASSEMBLY Body / Chassis Assembly (GHS Models) Engine Group F 0 F00 6 F0 F0 F F0 F0 Use only genuine Walker replacement parts

28 PARKING BRAKE ASSEMBLY ITEM PART DESCRIPTION NO NO NO REQ D ITEM PART DESCRIPTION NO NO NO REQ D Parking Brake Assembly 06- Handle Grip, Red 06- Parking Brake Lever (-/) 06- Lever Mount 0 Grease Fitting 0 Clevis Pin (/6 x /) Brake Actuator Arm 0 Pin, Transmission Lock 0 Clevis 0 Compression Spring (/ x /) 0 Rubber Dust Shield (/ x / x /) 6- O-Ring Seal (/ x /) 0 Plunger Bushing, Gear Axle 0- Brake Actuator Mount Clevis Pin (/6 x /) Cable Clamp (/) 6 0 Brake Control Cable, LH (") 0 Brake Control Cable, RH (0") 0- Cable Mount Bracket 0- Cable Pull Rod 0 Ball Joint (/-) Fasteners 0- Keps Nut F00 /- Hex Nut /-0 Keps Nut F0 0- x / PPHMS F0 /-0 x / Hex Bolt F0 /-0 x / Hex Bolt F0 AN6066 Washer F0 / E Retainer Ring F06 #0 SAE Washer F0 / x / Roll Pin F / x / Cotter Pin F / x -/ x 0 Washer F /6 x / Cotter Pin F6 AN6066L Washer F /- Keps Nut 6 Use only genuine Walker replacement parts

29 N PARKING BRAKE ASSEMBLY Body / Chassis Assembly (GHS Models) F0 0 F00 F F F0 F0 F6 F0 F06 F F6 F06 F F0 6 F0 F0 F F F0 F06 F F6 F0 F06 F0 6 0 F F Hydrostatic Ground Drive Assemblies Use only genuine Walker replacement parts

30 GHS GROUP ITEM PART DESCRIPTION NO NO NO REQ D ITEM PART DESCRIPTION NO NO NO REQ D Delivery Chute Assembly - Elbow Delivery Spout - Backing Plate, Grass-Pak Switch Rear Clip, Chute Mount Side Clip, Chute Mount - Delivery Chute W/Clips / 00 (Includes Items #,, 6, F6 & F) 6-0 Front Clip, Chute Mount 0- Body Chute (0 Blower) Blower Belt Tightener Assembly -6 Blower Drive Pulley (Includes Items # F0, F & F) - Blower Belt (Micro-V) 0 - Blower Pulley (Micro-V) (Includes Items # F06, F0 & F) 6- Torsion Spring 0- Fiberglide Bearing 0- Grease Fitting ( Deg) 6- Blower Belt Tightener Arm 0- Inner Race (-/) 6 Retainer Washer (/ x -/) Idler Pulley (") Blower Assembly Starter Relay Mount 6 Bearing W/Collar (/) 0 Blower Assembly (0") (Includes Items #, -,,, F0, F00, F, F6 & F6) - Blower Housing (0) - Blower Output Shaft (0) Blower Wheel (0") - Blower Faceplate (0) 6 Intake Tube (0 Blower) 6 - Skid Bar (0" Blower) - Intake Cover/GHS ** Cable Clamp (/ x /) Fasteners 0- Keps Nut 6 /-0 Keps Nut /6- Whiz Locknut F0 /-6 Keps Nut F06 0- x / PPHMS F0 /-0 x / Hex Bolt F0 /6- x / Hex Bolt F0 /-6 x -/ Hex Bolt F00 /-6 x -/ Hex Bolt F0 /-6 x -/ Hex Bolt F00 / SAE Washer F0 AN6066 Washer F06 /6 x /6 x Key F0 /6- x / SQH Set Screw F0 A/A66D Aluminum Pop Rivet 6 F00 /-0 x -/ Hex Bolt F /6- x / SQH Set Screw F 0- x / PTHMS F /6- x / Hex Bolt F /-0 x -/ Hex Bolt F6 /6 Split Lock Washer F /6- Hex Nut F /6 Split Lock Washer F / x / Woodruff Key (# 06) F /6- x -/ Hex Bolt F6 A/A6D Alum Pop Rivet (/6D x /L) F /6 Bulbex Rivet 6 F6 /-0 x / Carriage Bolt * Service Part Only ** Plugs Blower when GHS is not in use Furnished only with Mulching Decks, SD Decks used on a GHS Tractor, Rotary Broom Attachment and Snowblower Attachment Use of this part may be replaced by installing Blower Lockout Kit (P/N ) NOTE: ELECTRICAL CONNECTORS, Page 0 for identification of all Electrical Wiring Service Parts Use only genuine Walker replacement parts

31 GHS GROUP Electrical Connectors F06 Electrical Assemblies (GHS 00 Bushel Components) F F F6 6 F F F0 F0 0 F F6 Main Component Power Transmission (GHS Models) F00 F0 F00 F0 6 F0 F F F06 F0 F 0 F0 Body / Chassis Assembly (GHS Models) F6 F F0 F00 F 6 F0 F0 F0 F F Use only genuine Walker replacement parts

32 GHS POWERFIL ASSEMBLY (00) ITEM PART DESCRIPTION NO NO NO REQ D ITEM PART DESCRIPTION NO NO NO REQ D 00 GHS Powerfil Assembly - Bearing Cap, Powerfil - Pivot Bearing (#SPP) - Pivot, Delivery Spout - Pivot Mount Ball Joint (/-) 6 - Powerfil Push Rod - Bushing, Powerfil Actuator - Compression Spring (/ x ) - Powerfil Actuator Rod Actuator Rod Assembly * (Includes Items # - & F00) 0 - Motor Mount Nut (/-) * Actuator Arm - Motor Mount Washer * 6- Grommet (/6 x /) - Actuator Motor (V) (Includes Items # & ) Fasteners 0- Keps Nut 0 F00 /- Hex Nut F06 0- x / PPHMS F0 0- x / PTH Screw F0 AN6066 Washer F0 /6 Rivet Backup Washer F0 0- x -/ SHC Screw F0 / x / Roll Pin F 0- x / PTHMS 6 F6 AN6066L Washer F /- Keps Nut * Service Part Only 0 Use only genuine Walker replacement parts

33 GHS POWERFIL ASSEMBLY (00) F06 F0 F0 F00 F00 0 Electrical Assemblies (GHS 00 Bushel Components) F00 6 F6 F0 Electrical Assemblies (GHS 00 Bushel Components) F F0 F F0 F F0 F GHS Group Use only genuine Walker replacement parts

34 GHS 00 BUSHEL CATCHER ASSEMBLY ITEM PART DESCRIPTION NO NO NO REQ D ITEM PART DESCRIPTION NO NO NO REQ D Upper Baffle Screen Assembly (Removable) - Removable Screen (/6 Hole) ** (Includes Items #,, F0 & F0) 06 Knob / Threaded Insert (0-) 606- Channel Top, LH 606- Channel Bottom 6- Edge Molding (6") 6 0 Screen Seal (-/) 0 Mustache Spring 606 C-Channel (00) C-Channel With Spring (00) * (Includes Items #, & F0) 606- Channel Top, RH 00 Exhaust Deflector Door Assembly Upper Seal Support 60- Upper Door Seal 60- Backup Plate - 00 Catcher Box Door (Includes Items # 0-, 6,, F0, F0 & F) Handle 60- Door Mount, LH Upper Door Stiffener 60- Lower Door Stiffener 60- Door Guide 60- Door Mount, RH GHS 00 Bushel Catcher Assembly Center Strap 60- Upper Frame Doubler 60- Outside Box Strap, LH 60- Lower Frame Doubler 60- Center Frame Doubler 60- Catcher Door Finger Catcher Mount 60- Catcher Dump Flap W/Plate Backing Plate, Dump Flap Reinforcing Strap 0 0- Pivot Bushing Inner 0- Decal Plate, Round (Set of ) 60- Pivot Bushing (/ x /6) 60- Hinge Plate, LH 0- Outside Torsion Bushing 60- Upper Arm 6 - Ball Joint (/6-) - /6 Ball Stud - Gas Spring Spring Clip 0 - Gas Spring Cover, LH 60- Lower Arm 0-6 Pivot Bushing Outer - / Ball Stud -6 Gas Spring Plate 60-0 Box Support, Gas Spring 6 - Handle, Catcher Lift Grommet (/ x / x /6) Wire Harness Channel Catcher W/O Powerfil, Gray * (Includes Door) Catcher W/Powerfil, Gray * (Includes Door) Bushel Catcher Box, Gray * Powerfil Cover Plate - Gas Spring Cover, RH 60- Hinge Plate, RH 60- Torsion Bar - Optional Dump Bag (Not Shown) May be ordered as an option Contact your Walker dealer Fasteners 0- Keps Nut /-0 Keps Nut /6- Whiz Locknut F00 /6- ESNA Nut F0 /6- Jam Nut F0 0- x / PPHMS F06 0- x / PPHMS F0 0- x / PPHMS F0 /-0 x / Hex Bolt 0 F0 /6 SAE Washer F00 / SAE Washer F06 / x Cotter Pin F0 A/A66D Aluminum Pop Rivet F0 /6 Rivet Backup Washer F0 - x / PTHMS 6 F 0- x / PTHMS F0 #0 Internal Star Lock Washer F /-0 x / PPHMS, SS F6 /-0 x PPHMS, SS F0 /6- x -/ Hex Bolt F0 /-0 x -/ PPHMS, SS F /-0 x / PPHMS, SS F0 /6D x /L Rivet, SS F0 Rivet, Aluminum F Aluminum Pop Rivet 6 F60 /-0 x / Hex Bolt F0 /-0 x / Carriage Bolt F /6 Bulbex Rivet 0 F6 /6- x / SBH Cap Screw, SS F0 /-0 x -/ PPHMS, SS * F /6 x / Aluminum Rivet, Black 6 Service Part Only ** This screen can be replaced by P/N - Removable Screen (/" holes) for improved air flow performance in wet conditions Use only genuine Walker replacement parts

35 GHS 00 BUSHEL CATCHER ASSEMBLY F F F06 F0 0 F0 F0 F0 F F F F0 F0 6 F0 Rear Body Assembly (GHS Models) F F0 F0 F F F0 F0 F F0 F6 6 F6 F0 F F0 6 F0 F F06 F0 0 F00 F0 F0 Rear Body Assembly (GHS Models) F0 F0 6 6 F00 0 F0 F F06 F0 F F F F0 F F0 F0 F0 F6 F 0 F0 F F F0 F0 F0 F0 F6 6 F F F0 F F0 F0 F0 F0 F0 F60 F0 F00 F0 F0 6 6 F6 F0 F0 F6 F60 F00 F0 F0 F 6 0 F0 F0 0 F06 F0 F0 F0 Use only genuine Walker replacement parts

36 INSTRUMENT PANEL ASSEMBLY ITEM PART DESCRIPTION NO NO NO REQ D ITEM PART DESCRIPTION NO NO NO REQ D Instrument Panel Assembly 0- Instrument Panel Cover (Optional) ** 6- Instrument Panel Assembly (Includes Items # -, 6-6, -, F, F0 & F) 0- Panel Frame 0- Panel Faceplate W/Decal 6 Panel Gasket 60-6 Ignition Key ( Set) * Ignition Switch (with Keys) (Includes Item # 6) 6- Red Indicator Light Assembly - Boot, Circuit Breaker - Circuit Breaker ( Amp) 0 - Circuit Breaker (0 Amp) 0- Hourmeter (Global) Toggle Switch (Off-On) - Switch Boot 06- Water Temperature Gauge Voltmeter Gauge 6 - Wire Harness, Instrument Panel - Cable Tie (# x -/") 0- Shock Mount (0 x ) Panel Box Mount Plate 0 Panel Box W/Graphic - Grommet (/ x -/6) 0-6 Lining, Panel Box (/) 6-6 Relay Switch (0/0 Amp) * 6- Relay Mount * 6 Warning Horn 6 6 Relay Switch (0/0 Amp) NC (Includes Items # & ) - Jumper Wire Fasteners 0- Keps Nut /-0 Keps Nut 6 F0 0- x / PPHMS F #6 x / PPHSMS, SS F J Clip, Instrument Panel C0-6A F0 6- x / PPHMS F 6- Keps Nut F 6- x /6 PPHMS * Service Part Only ** May be ordered as an option Contact your Walker dealer NOTE: ELECTRICAL CONNECTORS, Page 0 for identification of all Electrical Wiring Service Parts Use only genuine Walker replacement parts

37 INSTRUMENT PANEL ASSEMBLY F0 F DETAIL H F YEL/ DETAIL B ORG/ WHT BLU YEL/ 6 To Wiring Harness F0 PUR DETAIL A BLU 6 GRA DETAIL C To Wiring Harness B ORG BLU 6 A DETAIL D PUR YEL/GRN 6 DETAIL E D F C BLU YEL/ ORG GRA GRA YEL 0 E DETAIL F F F BLU/ DETAIL G G GRA GRA I J 6 H BLU/ PUR PUR DETAIL I DETAIL J ORG/WHT YEL/GRN YEL/GRN GRA YEL F 0 END VIEWS ARE SHOWN FROM BACK OF PLUG Use only genuine Walker replacement parts

38 ELECTRICAL ASSEMBLY ITEM PART DESCRIPTION NO NO NO REQ D ITEM PART DESCRIPTION NO NO NO REQ D Battery Assembly - Cable Tie (# x -/") 6 Battery Terminal Insul, Red (+) - Battery Hold-Down Bar Hook Bolt 0- Battery Pan 6 NS Battery (V/0CCA/Dry) Battery Terminal Insul, Black (-) 6 Battery Cable (-) Harness Assembly - Cable Tie (0# x ") 0 Cable Clamp (/) - PTO Safety Switch (NO) 0- Wire Harness Cable Clamp (/) 0 Wire Harness (/00) Lead Wire (Battery Charge) Switch ( Deg, /- NPT) 06- Switch (0 Deg, /- NPT) 6 Relay Switch (0/0 Amp) NC (Includes Items # & ) - Resistor, 0 Watt / OHM % 0 Cable Clamp (/ x /) - Time Delay Harness -6 Time Delay Module - Fan Control Module W/P Plug 6- Relay Mount * 6-6 Relay Switch (0/0 Amp) * 6 - Safety Switch (NO) 60- Adapter Harness - Wire Saddle ( Wires) Battery Cable (+) 0 Circuit Breaker (0 Amp) (Auto Reset/Sealed) -0 Breaker, Mount Bracket Circuit Breaker (0 Amp) (Auto Reset/Sealed) 0- Circuit Breaker Jumper Fasteners 0- Keps Nut 0 /-0 Keps Nut /6- Whiz Locknut F0 /-0 ESNA Wing Nut F0 0- x / PPHMS F06 0- x / PPHMS F0 0- x / PPHMS F0 /-0 x / Hex Bolt F0 /-0 x / Hex Bolt F00 / SAE Washer F06 / Internal Star Lock Washer F0 A/A66D Aluminum Pop Rivet F0 /6 Rivet Backup Washer F00 /-0 x -/ Hex Bolt F0 /6- x Hex Bolt F 0- x / PTHMS F -0 Keps Nut F 0- Keps Nut F -0 x / PPHMS * Service Part Only NOTE: ELECTRICAL CONNECTORS, Page 0 for identification of all Electrical Wiring Service Parts NOTE: Decals for this assembly are not shown here TRACTOR DECALS, Page for Decal listing and placement information 6 Use only genuine Walker replacement parts

39 ELECTRICAL ASSEMBLY F0 F00 F0 F0 F00 F0 F00 F0 GRA F00 DETAIL A /WHT F06 F F 6 Main Component Power Transmission (GHS or SD Models) A F0 F06 0 BRN ORG GRA F0 F0 F0 0 6 BRN YEL / GRN DETAIL H F0 G F06 DETAIL B / B F F0 F YEL BRN ORG/WHT GRA C D F0 PUR BLU/ GRN BRN GRN DETAIL I H DETAIL C YEL GRA YEL/GRN BRN YEL Engine Group I J GRA Instrument Panel Assembly DETAIL D GRN ORG ORG GRN BRN /WHT /WHT BRN BRN ORG/ WHT DETAIL J ORG ORG ORG/GRN F0 F0 F0 Electrical Assemblies (GHS 00 Bushel Components) 0 GRA Radiator Group Air Intake And Exhaust Group YEL/GRN BLU/ ORG Engine Group YEL DETAIL K GRA F YEL GRN E YEL Engine Group F GRN F06 PUR K /WHT F00 DETAIL E DETAIL F GRN YEL BLU DETAIL G F06 ORG/GRN BRN 6 END VIEWS ARE SHOWN FROM THIS DIRECTION Use only genuine Walker replacement parts

40 ELECTRICAL ASSEMBLIES (GHS 00 BUSHEL COMPONENTS) ITEM PART DESCRIPTION NO NO NO REQ D ITEM PART DESCRIPTION NO NO NO REQ D 00 Harness Components - Adapter Harness - Cable Tie (# x -/") Frame Clip (/6) 6 - Cable Tie (0# x ") 6- Horn, Full Signal * 6 0 / 00 Wire Harness - Grommet, Cut (/ x /) Grass-Pak Switch Assemblies -6 Aluminum Shaft & Vane Assembly - Grass-Pak Switch Assembly 0 Cable Clamp (/) Fasteners 0- Keps Nut F0 0- x / PPHMS F0 0- x / PTH Screw F 0- x / PTHMS F0-0 Keps Nut, SS F0-0 x / Hex Head, SS * Service Part Only NOTE: ELECTRICAL CONNECTORS, Page 0 for identification of all Electrical Wiring Service Parts Use only genuine Walker replacement parts

41 ELECTRICAL ASSEMBLIES (GHS 00 BUSHEL COMPONENTS) GHS Powerfil Assembly (00) A /WHT F F GHS 00 Bushel Catcher Assembly to (+) /WHT GHS 00 Bushel Catcher Assembly B Electrical Assembly to (-) GHS 00 Bushel Catcher Assembly 6 GHS Group F0 GHS Group 0 DETAIL A WHT /WHT /WHT 0 F0 F0 F0 F0 DETAIL B /WHT END VIEWS ARE SHOWN FROM THIS DIRECTION Use only genuine Walker replacement parts

42 ELECTRICAL CONNECTORS ITEM PART DESCRIPTION NO NO NO REQ D ITEM PART DESCRIPTION NO NO NO REQ D Electrical Wiring Service Parts 6-6- GA Butt Connector * GA Butt Connector * - 6- GA Shrink Connector * - -0 GA Shrink Connector * - Wire Terminal Adapter * GA Bullet Conn, Male * 6-6- GA Bullet Conn, Female * 0-6- GA Spg Loaded Term, Female * 0- Wire Clip, Female * 0 6 / x 6- GA QKS Term, Female * 6- /6 x - GA QKS Term, Female * 6 6- GA QKS Term, Female 0-6- GA Spg Loaded Term, Male * * 6-0 / x - GA QKS Term, Male * 6-6- GA Ring Term (#) Nylon Insulated * 6 6- / x 6- GA QKS Term, Male * 6-6 GA Ring Lug (/6) * 6- - GA Ring Term, #0 * GA Ring Term (/6) * GA Ring Term (/6) * 6-6- GA Ring Term, # 0 * GA Ring Term (/) * GA Ring Terminal (/) * 6-6- GA Ring Term (/) * GA Ring Term (/) * GA Ring Term, #0 * - Single Connector, Male * -Way Connector, Male * - -Way Locking Connector, Female * 0 - -Way Connector, Male * - -Way Connector, Female * -0 -Way Locking Connector, Male * 0- -Way Connector, Male * - -Way Connector, Male * -Way Locking Connector, Male * 6 - -Way Locking Connector, Female * - -Way Connector, Male * - -Way Connector, Female * - -Way Connector, Male * Way Connector, Male * - -Way Connector, Female * -6 6-Way Connector, Male - 6-Way Connector, Male * * - -Way Connector, Male * - -Way Connector, Female * 6 - -Way Connector, Male * 0- -Way Connector (M) * - 6-Way Connector (Female) * 0- Packard Plug (Male) * 0 0- Packard Plug (Female) * * Service Part Only NOTE: Not all Electrical Connectors are used with all assemblies NOTE: ELECTRICAL ASSEMBLY, Page 6 for locations of Wiring Harness and of all Electrical Wiring Service Parts 0 Use only genuine Walker replacement parts

43 ELECTRICAL CONNECTORS Use only genuine Walker replacement parts

44 LUBRICATION POINTS ITEM LOCATION LUBRICATION NO NO TYPE PLACES ITEM LOCATION LUBRICATION NO NO TYPE PLACES Lubrication Points Steering Lever Pivot Grease Body Hinge Point Oil Deck-to-PTO Coupling Grease (Grease Spline Slide Area) FSC Actuator Rod Pivot Pins Oil (FSC) Friction Body Pivot Grease 6 FSC Lever Pivot Grease FSC Lever Fork Grease (Grease Slide Area) Deck Support Arm Pivot Grease Universal Joint Tube Assembly Grease* 0 Parking Brake Lever Grease Universal Joint Quick Connect Grease Spline (Grease Slide Area) Gear Axle Oil** PTO Clutch Lever Pivot Grease Brake Actuator Rod and Brake Oil Band Pivot Pins (Clevis) Clutch Actuator Push Rod Grease 6 Belt Tightener Pivot, Grease Ground Drive Throttle Control Cable Ends Oil Cold Start Lever Grease Catcher Hinge Point Oil 0 Rear Wheel Bearings Grease Engine Dipstick / Oil Filler Oil** PTO Gearbox Dipstick Oil** Belt Tightener Pivot, Grease Blower Drive (GHS Model Only) Hydrostatic Drive Oil** Throttle Control Pivot Oil * Grease every eight () hours ** See MDD Operator s Manual for procedure for checking and changing oil in Engine Crankcase, Hydrostatic Transmissions and Gear Axles NOTE: See Model MDD Operator s Manual for proper lubrication intervals Use only genuine Walker replacement parts

45 LUBRICATION POINTS 6 & Use only genuine Walker replacement parts

46 WIRING SCHEMATIC WALKER MODEL Dd Beginning S/N 0-0 OPTIONAL LIGHT /WHT FUEL PUMP YEL /WHT POWERFIL R MOTOR /WHT ORG /WHT /WHT YEL/GRN OIL PRESSURE SWITCH GRA - HORN + PUR BLU/ WATER TEMP GAUGE SENDER / YEL STARTER STARTER SOLENOID GLOW PLUGS FUEL SOLENOID GRASS PAK SWITCH ALTERNATOR R WATER GRN GRN WATER GRN TEMP TEMP SWITCH /" SWITCH /" ENGINE GRN GRA RELAY - D YEL 0 GRN 6 BRN A FAN RESISTOR OFF GLOW PLUG START RUN IGNITION SWITCH CIRCUITS 0 = BATTERY = START / REVERSING MODULE = GLOW PLUGS 0 = START AC = FUEL PUMP, FUEL SOLENOID GAUGES, AND FAN RELAY - A FUEL SOLENOID START RELAY (PULL) OFF 0 + A GLOW PLUG 0 + START 0 + RUN 0 + RELAY - B WARNING RELAY OFF 0 + A GLOW PLUG OPEN START 0 + A RUN 0 + A ALL OPEN AC AC 0 + AC RELAY - C FUEL SOLENOID RUN RELAY (HOLD) OFF OPEN GLOW PLUG 0 + START 0 + A RUN 0 + A RELAY - D FAN SPEED CONTROL OFF 0 + A RUN (LOW) 0 + A RUN (HIGH) 0 + RELAY - E START/TIME DELAY RELAY OFF 0 + A START 0 + A PTO ON OPEN OPTIONAL LIGHT YEL/GRN GRA YEL/GRN YEL/GRN GRA YEL YEL BLU/ PUR BLU/ PUR PUR VOLTAGE METER GRA GRA G I LIGHTS PTO INTERLOCK SWICH /WHT HOUR METER + - BLU/ WATER TEMP G S I GRN GRN 6 0 TIME DELAY MODULE RELAY - C BATTERY + _ ORG YEL BRN GRN 0 AMP CIRCUIT BREAKER 0 AMP CIRCUIT BREAKER CHASSIS GROUND GRN SEAT SWITCH YEL / BRN GRN REVERSING MODULE YEL GRA BRN ORG/WHT FSC NEUTRAL INTERLOCK SWITCH ORG/GRN 0 AMP CIRCUIT BREAKER GRA YEL YEL/ 0 6 ORG/WHT BLU A RELAY - B AMP CIRCUIT BREAKER /WHT YEL/GRN PUR PUR - WARNING HORN BLU + RELAY - A ORG 0 BRN 6 ORG A YEL/ BRN RELAY - E 0 BRN A 6 OIL PRESSURE LIGHT YEL/GRN WATER TEMP LIGHT PUR ORG BLU 0 AC 0 GRA IGNITION FOR TAIL WHEEL LOCK Use only genuine Walker replacement parts

47 LIMITED WARRANTY FOR WALKER COMMERCIAL RIDER MOWER WHAT THIS WARRANTY COVERS, AND FOR HOW LONG: Walker Manufacturing company will, at its option, repair or replace, without charge, any part covered by this warranty which is found to be defective in material and/or workmanship within one () year* after date of sale to the original retail purchaser unless the product is used for rental purposes, in which case this warranty is limited to ninety (0) days At Walker s request, customer will make the defective part available for inspection by Walker and/or return the defective part to Walker, transportation charges prepaid All parts and components of the Walker Mower are covered by this warranty except the following components which are warranted separately by their respective manufacturers: Kubota Engine Battery The available warranties covering these items are furnished with each mower Walker does not assume any warranty obligation, liability or modification for these items, which are covered exclusively by the stated warranty of the respective manufacturers noted above * Extended warranties are offered for the following powertrain components: A three () year unlimited hour warranty is offered for the Walker P/N 600- Gear Axle Assembly A three () year or 000 hour (whichever comes first) warranty is offered for Eaton Model Hydrostatic transmissions; covers full cost of replacement up to 000 hours of use, and after 000 hours warranty coverage is prorated against 000 hours WHAT THIS WARRANTY DOES NOT COVER: A This warranty does not cover defects caused by depreciation or damage caused by normal wear, accidents, improper maintenance, improper use or abuse of the product, alterations, or failure to follow the instructions contained in the Operator s Manual for operation and maintenance B The customer shall pay any charges for making service calls and/or for transporting the mower to and from the place where the inspection and/or warranty work is performed HOW TO OBTAIN SERVICE UNDER THIS WARRANTY: Warranty service can be arranged by contacting the dealer where you purchased the mower or by contacting Walker Manufacturing Company, East Harmony Road, Ft Collins, CO 0 Proof of the date of purchase may be required to verify warranty coverage WARRANTY LIMITATION: A THERE IS NO OTHER EXPRESS WARRANTY ANY WARRANTY THAT MAY BE IMPLIED FROM THIS PURCHASE INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IS HEREBY LIMITED TO THE DURATION OF THIS WARRANTY AND TO THE EXTENT PERMITTED BY LAW ANY AND ALL IMPLIED WARRANTIES ARE EXCLUDED Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you B WALKER WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES AND/OR EXPENSES IN CONNECTION WITH THE PURCHASE OR USE OF THE MOWER Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation(s) or exclusion(s) may not apply to you C Only the warranty expressed in this limited warranty shall apply and no dealer, distributor, or individual is authorized to amend, modify, or extend this warranty in any way Accordingly, additional statements such as dealer advertising or presentations, whether oral or written, do not constitute warranties by Walker, and should not be relied upon D This warranty gives you specific legal rights, and you may also have other rights which vary from state to state

48 WALKER MFG CO E HARMONY ROAD, FORT COLLINS, CO 0 (0) -6 FORM NO 00 PRINTED IN USA wwwwalkermowerscom 0 WALKER MFG CO