Topside / Shipboard Environmental Connectors
|
|
- Buck Farmer
- 5 years ago
- Views:
Transcription
1 eacrow arine Bronze opside / hipboard I-B with solder cup or crimp contacts its-mb reverse-bayonet mil-c-5015 type / VG95234 EQUIVAEN arine Bronze eries I-B connectors are compliant with VG95234, using all the same insert arrangements available in the standard I everse Bayonet eceptacles and IB everse Bayonet Plugs. ypically they are used for power and signal transmission, with wires from 32 AWG to 4/0. A wide variety of backshells allow the I-B to accept jacketed cables, single or multi-poles, with or without FI/EI shielding, conduits with PG or metric thread. IP67 protection is the standard performance. IP68 on request. I-B How o Order ample Part Number IB G a P Y mb OPIDE: EACOW eries I = everse bayonet coupling receptacle IB = everse bayonet coupling plug Plug Grounding Fingers G = Grounding fingers; omit for none (plug only) Contact ype 31 = older cup 41 = Crimp hell tyle ee shell style table Environmental Class ee environmental class table; backshell determined by class (see note 1 and 2) hell ize/insert ee insert arrangement tables Contact Gender P = Pin = ocket Alternate Insert otation ee insert rotation positions table (pg 8-9) aterial Option B = arine bronze I or IB Connector hell tyles I eceptacle Code Description 00 Front panel mount square flange receptacle with accessory threads 01 In-line cylindrical receptacle with accessory threads 02 Front panel mount square flange receptacle no accessory threads 03 ear panel mount square flange receptacle no accessory threads 030 ear panel mount square flange receptacle with accessory threads 038 ear panel mount square flange receptacle with 90 backshell 07 ear panel mount jam nut receptacle no accessory threads 070 ear panel mount jam nut receptacle with accessory threads 078 ear panel mount jam nut receptacle with 90 backshell IB Plug Code Description 06 traight cylindrical plug connector with accessory threads 08 Cylindrical plug connector with 90 backshell 26 quare flange panel mount plug Notes 1. ee pages 16 and 17 for connector/backshell configurations. 2. ee page 18 for overall length of specific connector/backshell configurations. Environmental Class Code Description A Non-environmental G, G, P Environmental (with wire sealing grommet) G Environmental (wire sealing grommet and shrink boot) F,, Environmental (wire sealing grommet and compression ring) hell yle / environmental class matrix hell Environmental Class tyle A F G G G P P I 00 I 01 I 02 I 03 I 030 I 038 I 07 I 070 I 078 IB 26 IB 06 IB Glenair, Inc 1211 Air Way, Glendale, CA U.. CAGE code arine/ubsea Catalog
2 eacrow arine Bronze opside / hipboard I-B marine bronze insert arrangements ating Contact Number Contact ize 4/ A A A I I I A A I A D A A E A A A A A A10* I I D D D D A B A I A A A A A C A A D (18-20x110 ) A D D D D A I ating Contact Number Contact ize 4/ A I A A A A A A A A A A A24 A (20-11x100 ) I A A (20-11x250 ) I A A8 I A9 A A48 I B8 A D D A D E E E B D A A A A A A A A A A A D A OPIDE: EACOW * Only Crimp Contact Version 2017 Glenair, Inc 1211 Air Way, Glendale, CA U.. CAGE code arine/ubsea Catalog 5
3 eacrow arine Bronze opside / hipboard I-B marine bronze insert arrangements OPIDE: EACOW ating Contact Number Contact ize 4/ A10 A A37* A A D A D A D A D A A A A A A A D D E I A A1 B A8 A A11 A A12 A A25 A A28 I A55* I G5 A A D E D A D A A A (28-12x100 ) A A A A I A * Only Crimp Contact Version ating Contact Number Contact ize 4/ A A D D A A * I A A A29 A A31* A A35 A A63 I B1 B B2 E D E D D A I A D D D D D A A A A A A5 G A A D A A1 A A3 E A8 A A25 A A27 A A30 A A40 A A48 I A55 A B22 A Glenair, Inc 1211 Air Way, Glendale, CA U.. CAGE code arine/ubsea Catalog
4 eacrow arine Bronze opside / hipboard I-B marine bronze insert arrangements ating Contact Number C 1 1 Contact ize 4/ D A A A A A A A D A (36-9x100 ) A D A = 36-B39 A A A D A7 A A10 A A35 A A51 D A72* I A99* A B78 D B90 D 1 n.1** pecial Contact 36-D78 D D A A A D D A A A A A A * A * I A A3 A A4 A A5 A ating Contact Number 40-A5G A 5 5 Contact ize 4/ A6 B A8 E A9 A A10 D A14 A A20 D A24 D A38 A A51 A A55 A A56 A A62 A A65 A A70 A B4 E B19 A B25 A B37 A D4 C G4 E 4 4 * Only Crimp Contact Version pecial Contact OPIDE: EACOW 2017 Glenair, Inc 1211 Air Way, Glendale, CA U.. CAGE code arine/ubsea Catalog 7
5 eacrow arine Bronze opside / hipboard I-B marine bronze insert rotation OPIDE: EACOW a ± 2 W X Y Z A a ± 2 W X Y Z A A8 20-A A B A A a ± 2 W X Y Z A1 24-A8 24-A A12 24-A A A G Glenair, Inc 1211 Air Way, Glendale, CA U.. CAGE code arine/ubsea Catalog
6 eacrow arine Bronze opside / hipboard I-B marine bronze insert rotation a ± 2 W X Y Z 28-72** A A A A B1 28-B A5 G A1 32-A A A A A30 32A A A B a ± 2 W X Y Z = 36-B A7 36-A A35 36-A A A B B-90 36D A A A A A5G A A9 40-A A14 40-A A24 40-A A51 40-A55 a ± 2 W X Y Z 40-A A A A B B B25 40-B37 40-D4 40-G4 ** Class A Only - Only Crimp Contacs Insert otation (front view) α α Normal Position Alternate Position with ocket Contacts Alternate Position with Pin Contacts OPIDE: EACOW 2017 Glenair, Inc 1211 Air Way, Glendale, CA U.. CAGE code arine/ubsea Catalog 9
7 eacrow arine Bronze opside / hipboard I-B with older Cup or Crimp Contacts its 00 front wall mount receptacle with through holes and accessory threads hell ize +0.2[.01]- 0.1[.00] [.01] ax. +0.4[.02] -0[0.00] Ø +0.1[0.00] -0[0.00] F hread F [0.72] 2.8 [0.11] 24.7 [0.97] 14.2 [0.56] [0.72] 25.4 [1.00] 3.2 [0.13] UNEF [0.96] 3.2 [0.13] 24.9 [0.98] 14.2 [0.56] [0.91] 30.4 [1.20] 3.2 [0.13] UNEF [1.07] 3.2 [0.13] 24.9 [0.98] 14.2 [0.56] [0.97] 32.5 [1.28] 3.2 [0.13] UNEF [1.07] 3.2 [0.13] 33.9 [1.33] 19.0 [0.75] [0.97] 32.5 [1.28] 3.2 [0.13] UNEF [1.21] 4.0 [0.16] 34.3 [1.35] 19.0 [0.75] [1.06] 35.0 [1.38] 3.2 [0.13] UNEF [1.34] 4.0 [0.16] 34.3 [1.35] 19.0 [0.75] [1.16] 38.0 [1.50] 3.2 [0.13] Ø [1.47] 4.0 [0.16] 34.3 [1.35] 19.0 [0.75] [1.25] 41.0 [1.61] 3.2 [0.13] [1.61] 4.0 [0.16] 35.8 [1.41] 20.6 [0.81] [1.37] 44.5 [1.75] 3.7 [0.15] [1.84] 4.0 [0.16] 35.8 [1.41] 20.6 [0.81] [1.56] 50.9 [2.00] 3.7 [0.15] [2.10] 4.0 [0.16] 37.4 [1.47] 22.2 [0.87] [1.75] 57.0 [2.24] 4.3 [0.17] UN [2.35] 4.0 [0.16] 37.4 [1.47] 22.2 [0.87] [1.94] 63.5 [2.50] 4.3 [0.17] UN [2.58] 4.0 [0.16] 37.4 [1.47] 22.2 [0.87] [2.19] 69.9 [2.75] 4.3 [0.17] UN OPIDE: EACOW its 01 In-line receptacle with accessory threads V hread hell ize +0.2 [.01] -0.1 [00] [.01] ax [.02] -0 [0] ±0.1[.00] V hread [0.72] 2.8 [0.11] 24.7 [0.97] 14.2 [0.56] 21.8 [0.86] UNEF [0.96] 3.2 [0.13] 24.9 [0.98] 14.2 [0.56] 28.8 [1.13] UNEF [1.07] 3.2 [0.13] 24.9 [0.98] 14.2 [0.56] 30.5 [1.20] UNEF [1.07] 3.2 [0.13] 33.9 [1.33] 19.0 [0.75] 30.5 [1.20] UNEF [1.21] 4.0 [0.16] 34.3 [1.35] 19.0 [0.75] 33.8 [1.33] UNEF [1.34] 4.0 [0.16] 34.2 [1.35] 19.0 [0.75] 36.9 [1.45] [1.47] 4.0 [0.16] 34.3 [1.35] 19.0 [0.75] 39.5 [1.56] [1.61] 4.0 [0.16] 35.8 [1.41] 20.6 [0.81] 43.9 [1.73] [1.84] 4.0 [0.16] 35.8 [1.41] 20.6 [0.81] 48.4 [1.91] [2.10] 4.0 [0.16] 37.4 [1.47] 22.2 [0.87] 56.0 [2.20] UN [2.35] 4.0 [0.16] 37.4 [1.47] 22.2 [0.87] 6 [6] UN [2.58] 4.0 [0.16] 37.4 [1.47] 22.2 [0.87] 68.6 [2.70] UN Glenair, Inc 1211 Air Way, Glendale, CA U.. CAGE code arine/ubsea Catalog
8 eacrow arine Bronze opside / hipboard I Front Wall ount (00) and In-line ecptacles (01) its 02 front wall mount receptacle, No accessory threads hell ize Ø A +0.2 [.01] -0.1 [.00] ØC ax. [.01] ax +0.41[.02] -0 [0.00] [.01] [.01] Ø +0.1[.00] -0[0.00] ØC [0.72] 16.2 [0.64] 2.8 [0.11] 24.7 [0.97] 14.2 [0.56] [0.72] 25.4 [1.00] 3.2 [0.13] [0.96] 19.2 [0.76] 3.2 [0.13] 24.9 [0.98] 14.2 [0.56] [0.91] 30.4 [1.20] 3.2 [0.13] [1.07] 2 [0.88] 3.2 [0.13] 24.9 [0.98] 14.2 [0.56] [0.97] 32.5 [1.28] 3.2 [0.13] [1.07] 2 [0.88] 3.2 [0.13] 33.9 [1.33] 19.0 [0.75] [0.97] 32.5 [1.28] 3.2 [0.13] [1.21] 25.6 [1.01] 4.0 [0.16] 34.3 [1.35] 19.0 [0.75] [1.06] 35.0 [1.38] 3.2 [0.13] [1.34] 29.0 [1.14] 4.0 [0.16] 34.3 [1.35] 19.0 [0.75] [1.16] 38.0 [1.50] 3.2 [0.13] Ø [1.47] 32.2 [1.27] 4.0 [0.16] 34.3 [1.35] 19.0 [0.75] [1.25] 41.0 [1.61] 3.2 [0.13] [1.61] 35.3 [1.39] 4.0 [0.16] 35.8 [1.41] 20.6 [0.81] [1.37] 44.5 [1.75] 3.7 [0.15] [1.84] 41.4 [1.63] 4.0 [0.16] 35.8 [1.41] 20.6 [0.81] [1.56] 50.9 [2.00] 3.7 [0.15] [2.10] 47.8 [1.88] 4.0 [0.16] 37.4 [1.47] 22.2 [0.87] [1.75] 57.0 [2.24] 4.3 [0.17] [2.35] 54.1 [2.13] 4.0 [0.16] 37.4 [1.47] 22.2 [0.87] [1.94] 63.5 [2.50] 4.3 [0.17] [2.58] 59.0 [2.32] 4.0 [0.16] 37.4 [1.47] 22.2 [0.87] [2.19] 69.9 [2.75] 4.3 [0.17] its 03 ear panel mount square flange recepacle, no accessory threads Ø ØC hell ize +0.2 [.01] -0.1 [0.00] ØC max. [0.01] ax [0.01] -0 [0.00] [0.01] [0.01] [0.72] 16.2 [0.64] 2.8 [0.11] 25.0 [0.98] 18.4 [0.72] [0.72] 25.4 [1.00] [0.96] 19.2 [0.76] 3.2 [0.13] 25.0 [0.98] 18.4 [0.72] [0.91] 30.4 [1.20] [1.07] 2 [0.88] 3.2 [0.13] 25.0 [0.98] 18.4 [0.72] [0.97] 32.5 [1.28] [1.07] 2 [0.88] 3.2 [0.13] 34.5 [1.36] 23.2 [0.91] [0.97] 32.5 [1.28] [1.21] 25.6 [1.01] 4.0 [0.16] 34.5 [1.36] 23.2 [0.91] [1.06] 35.0 [1.38] [1.34] 29.0 [1.14] 4.0 [0.16] 34.5 [1.36] 23.2 [0.91] [1.16] 38.0 [1.50] [1.47] 32.2 [1.27] 4.0 [0.16] 34.5 [1.36] 23.2 [0.91] [1.25] 41.0 [1.61] [1.61] 35.3 [1.39] 4.0 [0.16] 34.5 [1.36] 23.2 [0.91] [1.37] 44.5 [1.75] [1.84] 41.4 [1.63] 4.0 [0.16] 34.5 [1.36] 24.2 [0.95] [1.56] 50.9 [2.00] [2.10] 47.8 [1.88] 4.0 [0.16] 34.5 [1.36] 24.2 [0.95] [1.75] 57.0 [2.24] [2.35] 54.1 [2.13] 4.0 [0.16] 34.5 [1.36] 24.2 [0.95] [1.94] 63.5 [2.50] [2.58] 59.0 [2.32] 4.0 [0.16] 34.5 [1.36] 24.2 [0.95] [2.19] 69.9 [2.75] 5 hd OPIDE: EACOW 2017 Glenair, Inc 1211 Air Way, Glendale, CA U.. CAGE code arine/ubsea Catalog 11
9 eacrow arine Bronze opside / hipboard I-B with solder cup or crimp contacts its 030 ear wall mount square flange receptacle with accessory threads Ø F hread hell ize +0.2[.01] -0.1[0.00] +0.2[.01] 0[.00] hd F hread [0.72] 2.8 [0.11] 30.0 [1.18] 18.4 [0.72] [0.72] 25.4 [1.00] UNEF [0.96] 3.2 [0.13] 30.0 [1.18] 18.4 [0.72] [0.91] 30.4 [1.20] UNEF [1.07] 3.2 [0.13] 30.0 [1.18] 18.4 [0.72] [0.97] 32.5 [1.28] UNEF [1.07] 3.2 [0.13] 37.0 [1.46] 23.2 [0.91] [0.97] 32.5 [1.28] UNEF [1.21] 4.0 [0.16] 36.0 [1.42] 23.2 [0.91] [1.06] 35.0 [1.38] UNEF [1.34] 4.0 [0.16] 38.3 [1.51] 23.2 [0.91] [1.16] 38.0 [1.50] [1.47] 4.0 [0.16] 37.0 [1.46] 23.2 [0.91] [1.25] 41.0 [1.61] [1.61] 4.0 [0.16] 37.0 [1.46] 23.2 [0.91] [1.37] 44.5 [1.75] [1.84] 4.0 [0.16] 39.5 [1.56] 24.2 [0.95] [1.56] 50.9 [2.00] [2.10] 4.0 [0.16] 39.5 [1.56] 24.2 [0.95] [1.75] 57.0 [2.24] UN [2.35] 4.0 [0.16] 39.5 [1.56] 24.2 [0.95] [1.94] 63.5 [2.50] UN [2.58] 4.0 [0.16] 39.5 [1.56] 24.2 [0.95] [2.19] 69.9 [2.75] UN OPIDE: EACOW its 038 P square flange receptalce and 90 backshell assembly with Accsy threads Ø U hell ize +0.2[.01] -0.1[0.00] F hread ax. U +0.2[.01] -0[0.00] [0.72] UNEF 2.8 [0.11] 48 [1.89] 25.0 [0.98] 18.4 [0.72] [0.72] 25.4 [1.00] [0.96] UNEF 3.2 [0.13] 50 [1.97] 26.5 [1.04] 18.4 [0.72] [0.91] 30.4 [1.20] [1.07] UNEF 3.2 [0.13] 53 [2.09] 27.0 [1.06] 18.4 [0.72] [0.97] 32.5 [1.28] [1.07] UNEF 3.2 [0.13] 60 [2.36] 27.0 [1.06] 23.2 [0.91] [0.97] 32.5 [1.28] [1.21] UNEF 4.0 [0.16] 61 [0] 30.0 [1.18] 23.2 [0.91] [1.06] 35.0 [1.38] [1.34] [0.16] 69 [2.72] 32.0 [1.26] 23.2 [0.91] [1.16] 38.0 [1.50] [1.47] [0.16] 69 [2.72] 32.0 [1.26] 23.2 [0.91] [1.25] 41.0 [1.61] [1.61] [0.16] 71 [2.80] 37.0 [1.46] 23.2 [0.91] [1.37] 44.5 [1.75] [1.84] [0.16] 73 [2.87] 38.0 [1.50] 24.2 [0.95] [1.56] 50.9 [2.00] [2.10] UN 4.0 [0.16] 77 [3.03] 45.5 [1.79] 24.2 [0.95] [1.75] 57.0 [2.24] [2.35] UN 4.0 [0.16] 80 [3.15] 47.2 [1.86] 24.2 [0.95] [1.94] 63.5 [2.50] [2.58] UN 4.0 [0.16] 83 [3.27] 52.0 [2.05] 24.2 [0.95] [2.19] 69.9 [2.75] 5 hd F hread Glenair, Inc 1211 Air Way, Glendale, CA U.. CAGE code arine/ubsea Catalog
10 eacrow arine Bronze opside / hipboard I-B with solder cup or crimp contacts its 07 jam nut receptacle, no accessory threads O-ing B hell ize +0.2[.01] -0.1[0.00] in. B ax. ± 0.2[.01] ±0.1[0.00] ey V hread [0.72] 5.2 [0.20] 4.0 [0.16] 24.5 [0.96] 27 [1.06] 31.8 [1.25] 11.2 [0.44] UNEF [0.96] 7.5 [0.30] 26.8 [1.06] 33 [1.30] 41.3 [1.63] 14.6 [0.57] [1.07] 7.5 [0.30] 26.8 [1.06] 38 [1.50] 44.4 [1.75] 15.7 [0.62] [1.07] 7.5 [0.30] 32.2 [1.27] 38 [1.50] 44.4 [1.75] 15.7 [0.62] V-hread [1.21] 9.0 [0.35] 33.7 [1.33] 40 [1.57] 47.6 [1.87] 16.8 [0.66] [1.34] 9.0 [0.35] 33.7 [1.33] 44 [1.73] 50.8 [2.00] 18.0 [0.71] [1.47] 9.1 [0.36] 33.7 [1.33] 46 [1.81] 54.2 [2.13] 20.2 [0.80] [1.61] 9.1 [0.36] 33.7 [1.33] 51 [2.01] 57.2 [2.25] 20.2 [0.80] UN [1.84] 8.5 [0.33] 5.6 [0.22] 35.2 [1.39] 55 [2.17] 63.5 [2.50] 22.5 [0.89] UN [2.10] 6.5 [0.26] 5.6 [0.22] 35.2 [1.39] 62 [4] 69.8 [2.75] 24.7 [0.97] UN [2.35] 8.3 [0.33] 5.6 [0.22] 35.2 [1.39] 71 [2.80] 76.2 [3.00] 26.9 [1.06] UN [2.58] 8.3 [0.33] 5.6 [0.22] 35.2 [1.39] 75 [2.95] 83.5 [3.29] 29.6 [1.17] UN its 070 jam nut receptacle with accessory threads V-hread O-ing 1 B F-hread hell ize B*ax F hread ± (ey) V hread [0.72] 5.2 [0.20] UNEF 4.0 [0.16] 24.5 [0.96] 36.2 [1.43] 27 [1.06] 31.8 [1.25] 11.2 [0.44] UNEF [0.96] 7.5 [0.30] UNEF 26.8 [1.06] 38.9 [1.53] 33 [1.30] 41.3 [1.63] 14.6 [0.57] [1.07] 7.5 [0.30] UNEF 26.8 [1.06] 38.9 [1.53] 38 [1.50] 44.4 [1.75] 15.7 [0.62] [1.07] 7.5 [0.30] UNEF 32.2 [1.27] 48.5 [1.91] 38 [1.50] 44.4 [1.75] 15.7 [0.62] [1.21] 9.0 [0.35] UNEF 33.7 [1.33] 49.3 [1.94] 40 [1.57] 47.6 [1.87] 16.8 [0.66] [1.34] 9.0 [0.35] [1.33] 49.3 [1.94] 44 [1.73] 50.8 [2.00] 18.0 [0.71] [1.47] 9.1 [0.36] [1.33] 49.3 [1.94] 46 [1.81] 54.2 [2.13] 20.2 [0.80] OPIDE: EACOW [1.61] 9.1 [0.36] [1.33] 49.3 [1.94] 51 [2.01] 57.2 [2.25] 20.2 [0.80] UN [1.84] 8.5 [0.33] [0.22] 35.2 [1.39] 51.9 [2.04] 55 [2.17] 63.5 [2.50] 22.5 [0.89] UN [2.10] 6.5 [0.26] UN 5.6 [0.22] 35.2 [1.39] 51.9 [2.04] 62 [4] 69.8 [2.75] 24.7 [0.97] UN [2.35] 8.3 [0.33] UN 5.6 [0.22] 35.2 [1.39] 51.9 [2.04] 71 [2.80] 76.2 [3.00] 26.9 [1.06] UN [2.58] 8.3 [0.33] UN 5.6 [0.22] 35.2 [1.39] 51.9 [2.04] 75 [2.95] 83.5 [3.29] 29.6 [1.17] UN *B minimum dimension is 2017 Glenair, Inc 1211 Air Way, Glendale, CA U.. CAGE code arine/ubsea Catalog 13
11 eacrow arine Bronze opside / hipboard I-B with solder cup or crimp contacts its 078 jam-nut receptacle and 90 Backshell assembly OPIDE: EACOW O-ing V hread B 1 F hread itb 06 plug with accessory threads F-hread U hell ize [.01] -0.1 [.00] 18.2 [0.72] 24.5 [0.96] 27.2 [1.07] 27.2 [1.07] 30.7 [1.21] 34.0 [1.34] 37.3 [1.47] 40.9 [1.61] 46.7 [1.84] 53.4 [2.10] 59.6 [2.35] 65.5 [2.58] hell ize in B ax 5.2 [0.20] 7.5 [0.30] 7.5 [0.30] 7.5 [0.30] 9.0 [0.35] 9.0 [0.35] 9.1 [0.36] 9.1 [0.36] 8.5 [0.33] 6.5 [0.26] 8.3 [0.33] 8.3 [0.33] F hread UNEF UNEF UNEF UNEF UNEF UN UN UN [.01] 4.0 [0.16] 5.6 [0.22] 5.6 [0.22] 5.6 [0.22] 5.6 [0.22] ±0.1[0.00] ±0.1 [.00] 24.5 [0.96] 26.8 [1.06] 26.8 [1.06] 32.2 [1.27] 33.7 [1.33] 33.7 [1.33] 33.7 [1.33] 33.7 [1.33] 35.2 [1.39] 35.2 [1.39] 35.2 [1.39] 35.2 [1.39] 1 ax 55 [2.17] 60 [2.36] 60 [2.36] 73 [2.87] 74 [2.91] 80 [3.15] 80 [3.15] 84 [3.31] 85 [3.35] 89 [3.50] 93 [3.66] 95 [3.74] Ø F hread [0.97] 22.6 [0.89] UNEF [0.97] 29.0 [1.14] UNEF [0.97] 31.6 [1.24] UNEF [1.34] 31.6 [1.24] UNEF [1.34] 36.2 [1.43] UNEF [1.37] 39.8 [1.57] [1.37] 43.0 [1.69] [1.41] 46.4 [1.83] [1.41] 53.0 [2.09] [1.47] 60.0 [2.36] UN [1.47] 66.2 [2.61] UN [1.47] 72.3 [2.85] UN ey 27 [1.06] 33 [1.30] 38 [1.50] 38 [1.50] 40 [1.57] 44 [1.73] 46 [1.81] 51 [2.01] 55 [2.17] 62 [4] 71 [2.80] 75 [2.95] [.01] 31.8 [1.25] 41.3 [1.63] 44.4 [1.75] 44.4 [1.75] 47.6 [1.87] 50.8 [2.00] 54.2 [2.13] 57.2 [2.25] 63.5 [2.50] 69.8 [2.75] 76.2 [3.00] 83.5 [3.29] 11.2 [0.44] 14.6 [0.57] 15.7 [0.62] 15.7 [0.62] 16.8 [0.66] 18.0 [0.71] 20.2 [0.80] 20.2 [0.80] 22.5 [0.89] 24.7 [0.97] 26.9 [1.06] 29.6 [1.17] U [.01] 25.0 [0.98] 26.5 [1.04] 27.0 [1.06] 27.0 [1.06] 30.0 [1.18] 32.0 [1.26] 32.0 [1.26] 37.0 [1.46] 38.0 [1.50] 45.5 [1.79] 47.2 [1.86] 52.0 [2.05] V hread UNEF UN UN UN UN UN Glenair, Inc 1211 Air Way, Glendale, CA U.. CAGE code arine/ubsea Catalog
12 eacrow arine Bronze opside / hipboard I-B with solder cup or crimp contacts itb plug assembly with accessory threads hell ize V hread ax. U UNEF 40 [1.57] 22.6 [0.89] 25.0 [0.98] UNEF 42 [1.65] 29.0 [1.14] 26.5 [1.04] Aluminum Die Cast Elbow U UNEF 46 [1.81] 31.6 [1.24] 27.0 [1.06] UNEF 55 [2.17] 31.6 [1.24] 27.0 [1.06] UNEF 57 [2.24] 36.2 [1.43] 30.0 [1.18] [4] 39.8 [1.57] 32.0 [1.26] [4] 43.0 [1.69] 32.0 [1.26] [2.64] 46.4 [1.83] 37.0 [1.46] [2.64] 53.0 [2.09] 38.0 [1.50] tainless teel/ arine Bronze achined Elbow. For dimensions please contact the factory UN 72 [2.83] 60.0 [2.36] 45.5 [1.79] UN 75 [2.95] 66.2 [2.61] 47.2 [1.86] UN 78 [3.07] 72.3 [2.85] 52.0 [2.05] V itb 06 square flange panel mount plug Ø hell ize ax. Ø +0.1[0.00] -0[0.00] [0.11] 29.9 [1.18] 22.6 [0.89] [0.72] 25.4 [1.00] 3.2 [0.13] [0.13] 29.9 [1.18] 29.0 [1.14] [0.91] 30.4 [1.20] 3.2 [0.13] [0.13] 35.1 [1.38] 31.6 [1.24] [0.97] 32.5 [1.28] 3.2 [0.13] [0.13] 35.1 [1.38] 31.6 [1.24] [0.97] 32.5 [1.28] 3.2 [0.13] [0.16] 40.2 [1.58] 36.2 [1.43] [1.06] 35.0 [1.38] 3.2 [0.13] [0.16] 43.8 [1.72] 39.8 [1.57] [1.16] 38.0 [1.50] 3.2 [0.13] [0.16] 43.8 [1.72] 43.0 [1.69] [1.25] 41.0 [1.61] 3.2 [0.13] [0.16] 43.8 [1.72] 46.4 [1.83] [1.37] 44.5 [1.75] 3.7 [0.15] [0.16] 44.0 [1.73] 53.0 [2.09] [1.56] 50.9 [2.00] 3.7 [0.15] [0.16] 45.1 [1.78] 60.0 [2.36] [1.75] 57.0 [2.24] 4.3 [0.17] [0.16] 45.1 [1.78] 66.2 [2.61] [1.94] 63.5 [2.50] 4.3 [0.17] [0.16] 45.1 [1.78] 72.3 [2.85] [2.19] 69.9 [2.75] 4.3 [0.17] OPIDE: EACOW 2017 Glenair, Inc 1211 Air Way, Glendale, CA U.. CAGE code arine/ubsea Catalog 15
Topside / Shipboard Environmental Connectors
Seacrow Marine Bronze IPT-MB marine bronze connectors ipt-mb mil-c-26482 bayonet type / V95328 Compliant Marine Bronze Series IPT-MB connectors are the choice for reliability when 20-16 AW signal cables
More informationSEACROW CONNECTORS MARINE BRONZE CONNECTORS FOR HARSH ENVIRONMENTAL APPLICATIONS
SEACROW CONNECTORS MARINE BRONZE CONNECTORS FOR HARSH ENVIRONMENTAL APPLICATIONS JUNE 2014 SEACROW CONNECTORS Marine Bronze Connectors for Harsh Environmental Applications Shipboard Application Glenair
More informationSeries IPT (26482 Type) Bayonet Coupler
IPT330 eedthrough with Jack-to-Jack RJ45 Sample Part Number IPT330 02PP G 18 5E 1 7 RJ45 Category 2 IPT330 Material/inish 02PP = ront Panel Mount Square lange receptacle G = Insert grounded to shell; Omit
More informationAmphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments
mphenol eries everse ayonet oupling onnectors 12-024-8 uggedized onnector eries for ail/ass ransit and other arsh nvironments mphenol able of ontents age o. mphenol eries eversed ayonet oupling onnectors
More informationAmphenol. ACA-B and GT Series Reverse Bayonet Coupling Connectors.
mphenol - and eries everse ayonet oupling onnectors www.amphenol-industrial.com mphenol 97 eries onnectors are U recognized and recognized. or further information on your individual application requirements,
More informationVG95234 Qualified Bayonet-Lock Connectors
Qualified Bayonet-Lock Crimp-Contact MIL-DTL-5015 Type Electrical for Ruggedized Power and Signal Applications United States United Kingdom Germany France Nordic Italy Spain Japan High Voltage Electrical
More informationWHEN YOU NEED THE BEST IN 5015 CONNECTORS
WHEN YOU NEED THE BET IN 5015 CONNECTO 702-802-2555 www.crownconnector.com TBE OF CONTENT 5015 Connectors...................................... 2 everse Bayonet Connectors.......................... 12
More information2) CONNECTOR DESCRIPTION IT SERIES Figure 1: Plug Connector Example
Coupling nut Plugshell O-Ring O-Ring Cable clamp 2) CONNECTOR DESCRIPTION IT SERIES Figure 1: Plug Connector Example Shell ring Plugshell O-ring: Shell: The Plugshell O-Ring is designed to help to maintain
More informationModular Bayonet connectors: a flexible solution for data and signals transmission in railways harsh environment.
GM Modular Bayonet connectors: a flexible solution for data and signals transmission in railways harsh environment. Passenger control Networking and lighting control Diagnostic support for brakes, motors
More informationAmphenol. Amphenol ACA-B Reverse Bayonet Coupling Connectors
mphenol - everse ayonet oupling onnectors 12-027-1 he Industrial onnector for actory utomation, obotics, rocess ontrol and est & easurement quipment. mphenol able of ontents age o. mphenol - everse ayonet
More informationNFF QualiFied CoNNeCtors ith series Easy-to-assEmbly, Rigid insert PowER and signal REliablE REvERsE bayonet CouPling ConnECtoRs June 2013
NF F 61030 Qualified C onn ec to r s ith series Easy-to-AssemblY, Power and Signal Reliable Reverse Bayonet Coupling June 2013 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High
More informationP and P Receptacle PCB Hole Patterns
Series 79 790-028P and 790-043P 790-028P and 790-043P This section contains printed circuit board footprints for vertical mounted Series 79 receptacles. The contact identification numbers are shown for
More informationCA-COM Industrial Connectors
CA-COM Industrial Connectors ITT Corporation ITT is a diversified leading manufacturer of highly engineered critical components and customized technology solutions for the energy, transportation and industrial
More informationSeries 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle
Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle 801-009 and 801-010 - Ordering Information In-Line Style 01 Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02 How To Order
More informationFR ITS RJ45-1 W PHM F6
CODE SCALE SERIES SHEET WEIGHT CODE SCALE SERIES DESCRIPTION SHEET.2x45 R.2 Max. Max. specific indicationweight DATE File:RECEPTACLE_FEMM--PCB_3 - Copia DESCRIPTION.2x45 R.2 Max. Max. DATE File:RECEPTACLE_FEMM--PCB_3
More informationINTRODUCTION. Products CONTENTS. Circular Threaded Coupling Connectors. Reverse Bayonet Coupling Connectors
IOUIO etronics India, established as manufacturers of connectors in, has grown into a leading producer and exporter of I grade electrical connectors and related accessories. etronics India's continuing
More informationAmphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments
Amphenol GT eries Reverse Bayonet Coupling Connectors 12-024-7 Ruggedized Connector eries for Rail/ass Transit and other Harsh Environments Amphenol Table of Contents age o. Amphenol GT eries Reversed
More informationWEIGHT / COST-SAVING Dummy Contact Sealing Plugs (DCSP) For reliable sealing of unused contact cavities without the use of electrical contacts
Sealing Plugs (DCSP) For reliable sealing of unused contact cavities without the use of electrical contacts The use of color-coded M27488 type plastic sealing plugs in unused contact cavities is a requirement
More informationElectrical Test voltage (Vrms) Service sea level at m M I II
8LT eries Applications High density connectors for all military and aeronautical purposes. tandards MIL-C 38999 eries I - QPL approved NC 93422 HE 308 DTAT-C 5935 X 0005 (HE 308 standard) GAM/T1 list Description
More information8D Series D38999 Aluminum Series
onnector part numbers Basic Series 8D 0-11 W 35 P N L style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI shielding Also available:. Square flange receptacle
More informationINTRODUCTION. Products CONTENTS. Circular Threaded Coupling Connectors. Reverse Bayonet Coupling Connectors
OUO etronics ndia, established as manufacturers of connectors in, has grown into a leading producer and exporter of grade electrical connectors and related accessories. etronics ndia's continuing mission
More informationWIRING INSTRUCTIONS FOR IT-FRIT (MIL-DTL-C-5015G) AND ITB-ITS-FRITS (VG95234) CONNECTORS
WIRING INSTRUCTIONS FOR IT-FRIT (MIL-DTL-C-5015G) AND ITB-ITS-FRITS (VG95234) CONNECTORS JUNE 2016 for IT - FRIT (MIL-C-5015G) and ITB - ITS - FRITS (VG 95234) Connectors The aim of this book is to show
More informationMIL-C Series 4 PART NUMBER CONSTRUCTION
MIL-C-38999 - eries 4 PART NUMBR CONTRUCTION D38999 / 40 W F 35 P N Alternative Orientation Contact Type Insert Configuration Class tyle Military Prefix COD HLL TYL COD HLL IZ / 40 Wall Mount Receptacle
More information8D Series D38999 Composite Series
Connector part numbers Basic Series 8D 0-11 J 35 P N L Shell style: 0: Square flange receptacle 5: Plug with RFI shielding Type: - : Connectors with standard crimp contacts. L: Receptacle with long PC
More informationAmphenol s 2M Micro38999 Connector Series The New Aerospace Standard
Tri-Start Threaded Coupling General Information Page Guide Order... C29 Weight... C30 Plugs... C31 In-Line... C32 Square Flange... C33 Jam Nut... C34 PCB Sq Flange... C35 PCBJam Nut... C36 PCB Double Flange.
More informationCannon Trident Connectors
Neptune is a range of circular connectors specifically designed for harsh environment applications. They come with membrane wire seals that meet the requirements for IP67 and do not require blanking plugs
More informationHeavy Duty Cylindrical MIL-C QWLD
20 eavy uty ylindrical I--22992 QW mphenol eavy uty ylindrical onnectors I--22992, QW wall mount receptacle cable connecting plug box mount receptacle jam nut receptacle (wall mount) thru bulkhead receptacle
More information8D Series D38999 Composite Series
Connector part numbers Basic Series 8D 0-11 J 35 P N L Shell style: 0: Square flange receptacle 5: Plug with RFI shielding Type: -: Connectors with standard crimp contacts. L: Receptacle with long PC tail
More informationTABLE OF CONTENTS. Amphenol Aerospace is a Certified ISO 9001 Manufacturer.
This catalog covers the Amphenol /Matrix MIL-C- 83723, Series III Connectors. These connectors incorporate crimp rear release contacts. There is great diversity within this cylindrical family, with the
More informationQUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS
QULIFIED YONET-LOK ONNETORS RIMP-ONTT MIL-DTL-5015 TYPE ELETRIL ONNETORS FOR RUGGEDIZED POWER ND SIGNL PPLITIONS JUNE 2017 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage
More informationAmphenol. Amphenol /Matrix MIL-C-83723, Series III Connectors. Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments
Amphenol /Matrix MIL-C-, Series III Connectors -0- Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments Amphenol This catalog covers the Amphenol /Matrix MIL-C-, Series
More informationQUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS
QULIFIED YONET-LOK ONNETORS RIMP-ONTT MIL-DTL-5015 TYPE ELETRIL ONNETORS FOR RUGGEDIZED POWER ND SIGNL PPLITIONS JUNE 2017 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage
More informationKVBS Reverse bayonet connectors for railway applications
Reverse bayonet connectors for railway applications KVBS connector series derives from the RF CVBS one and it is based on Mil-DTL-5015 and VG95234 specs. The most important advantages are the simpler and
More informationHIGH DENSITY INTERCONNECTS HD38999
HIGH DENITY INTERCONNECT HD38999 PD-229-2 PD-208-26 A CONNECTOR THAT TART AT 9 GOE TO 87 CONTACT The HD38999 family of connectors has 30% more contact density than the highest density il pec 38999 connectors
More informationHigh Vibration Self-Locking Coupling Nut High Amperage Contacts Dust & Sand Resistant
CDR eries Connectors High ibration elf-ocking Coupling ut High mperage Contacts Dust & and Resistant CDR ERIE ORDERIG IFORTIO CDR 00 H Z 32-79 P W - F80 95 COECTOR ERIE HE TYPE 00 Box ount Receptacle,
More informationCannon VG/CA-Bayonet. How to order VG Order reference. How to order Cannon Order reference. Explanation
How to order VG Order reference Series Shell style Dash Shell size Contact arrangement Contact type Contact termination Insulator position Explanation Series Shell style VG95234 A 32 6 S 1 N VG95234 J1,
More informationSUPERSEAL MIL-DTL-5015 TYPE REVERSE-BAYONET CONNECTORS: NOW WITH SUPERIOR SEALING, SHIELDING AND CRIMP CONTACT TERMINATION
RJ45 ETHERNET SUPERSEAL MIL-DTL-5015 TYPE REVERSE-BAYONET CONNECTORS: NOW WITH SUPERIOR SEALING, SHIELDING AND CRIMP CONTACT TERMINATION FIELD-READY RJ45 ETHERNET MIL-DTL-5015 TYPE REVERSE-BAYONET SUPERSEAL
More informationAmphenol JT/LJT Subminiature Cylindrical Connectors. Amphenol JT Connectors MIL-DTL Series II Crimp and MIL-C Series II Solder
mphenol J/J ubminiature ylindrical onnectors 2-090-7 mphenol J onnectors I--38999 eries II rimp and I--27599 eries II older mphenol J onnectors I--38999 eries I rimp and I--27599 eries I older mphenol
More informationMIL-DTL 38999Series III Aluminium Series
MIL-DTL 38999Series III Aluminium Series 13 Connector part numbers Basic Series 8D 0-11 W 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI
More informationMIL-DTL-38999Series III Composite Series
MIL-DTL-38999Series III Composite Series 25 Connector part numbers Basic Series 8D 0-11 J 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 5: Plug with RFI shielding. Type: -: Connectors
More informationSeries 801 Mighty Mouse Double-Start ACME Thread Receptacle
ouble-start ACME Thread Receptacle 801-009 and 801-010 Ordering Information Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02/12/22 In-Line Style 01 How To Order Sample Part Number 801-010
More informationProven Quality, Reliability & Expertise
CA Threaded Catalog Proven Quality, Reliability & Expertise ITT Cannon is a leading global manufacturer of connector products serving international customers in the aerospace and defense, medical, energy,
More informationSJT Series. Amphenol. Aerospace. Amphenol
eries TABE OF CONTENT - coop-proof Design of JT eries & tandard Mounting Dimensions of JT eries - Meet European pecification Applications Features, pecifications................... 98 How to Order, Rotations...............
More informationMIL-DTL Series 1 Solder Type PT
MIL-DTL-26482 Series 1 Solder Type PT The Amphenol Miniature Cylindrical Connector Series offers high density contact arrangements in a miniature, circular metal shell. This connector is environmentally
More informationCannon Trident Connector System
is a range of circular connectors specifically designed for harsh environment applications. They come with membrane wire seals that meet the requirements for IP67 and do not require blanking plugs for
More information891/2 Series. Description. Applications. Standards MIL-C 5015 G, class K NFL 54140
Applications Aircraft engines High temperature applications tandards IC 5015 G, class NF 54140 Description crew coupling High temperature connector for severe environment Fire resistant and fire wall High
More informationHigh Density Interconnects
Contents ection Description Pages Insert rrangement 40 How To Order HD38999 4 Contact and Technical Data 42 Receptacles Wall ount Receptacle 43 Wall ount Double Flange Receptacle 43 Line Receptacle 44
More informationPCB Single Row Connectors
SERIES PB Single Row onnectors Vertical Surface Mount PB onnectors with Jackscrews How to Order Vertical Surface Mount PB onnectors feature gold alloy TwistPin contacts. These nanomimiature connectors
More informationBRANCHE CONNECTEURS AEROMILITAIRES. AFD series Norme MIL-C G. Series 2
RN ONNTUR ROMIITIR series Norme MI- 26482 eries 2 ummary Introduction 1 dvantage 2 Technical characteristics 3 art-numbering system 4 tandard equivalence 5 ynoptic 6 rrangements 8 Receptacles 10 lugs 14
More informationSRC SERIES. Signal Connectors with bayonet locking system. Derived from VG95234 & in accordance with the NF F standard
SERIES Signal Connectors with bayonet locking system Derived from VG9523 & in accordance with the NF F 61-030 standard SERIES /// SIGNAL CONNECTORS Contents Main Characteristics... 2 Synoptic...3- Synoptic:
More informationTable of Contents Introduction... 2 Amphenol MIL-DTL-5015 and MIL-5015 Type Standard Cylindrical Connectors General Information, Class
able of ontents age Introduction...................................... 2 mphenol I--5015 and I-5015 ype tandard ylindrical onnectors eneral Information, lass esignations............................. 3
More informationAmphenol QWL Series Cylindrical Connectors Amphenol
mphenol QW eries ylindrical onnectors 12-053-4 mphenol O O escription age escription... age mphenol eavy uty ylindrical onnectors QW eries... 2 QW the environmental connector... 3 QW how to order... 4,
More informationUnderwater /Subsea Connectors and Cables. Deep Water Topside Downhole Shallow Water
Underwater /Subsea Connectors and Cables Deep Water Topside Downhole Shallow Water Glenair Marine / Subsea Connectors and Cables High pressure, harsh environment underwater / topside Subsea Deep Water
More informationTHREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS
MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL
More informationDirect grounding from PCB to shell Avoid the risk of breaking contact tails High resistance to vibration & shock Time saving & easy assembling
Direct grounding from PCB to shell void the risk of breaking contact tails High resistance to vibration & shock ime saving & easy assembling Prevent echanical tress on the older Joint 50151 EIE I ODEING
More information2M805 Tri-Start Threaded Coupling
2M805 Tri-Start Threaded Coupling General Information 2M Specs 2M801 2M803 2M804 2M805 Series Micro Miniature Connectors: s 2M805 Series of connectors offers the best EMI and Vibration performance among
More informationAmphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003
Amphenol eries SJT Series SJT VG 96912, Series 1 PAN 6433-2 JN 1003 Ordering information Ordering example: SJT G 06 RT 14-35 P A 014 Series (p. 9, 15, 18) SJT Scoop proof (100% scoop-proof) Junior (Miniature
More information8STA/8TA Series. Compact Circular Connectors Derived from MIL-DTL & JN1003. Connection Technologies
8STA/8TA Series Compact Circular Connectors Derived from MIL-DTL-38999 & JN1003 Connection Technologies 8STA/8TA Series Contents Overview Presentation... 06 Applications... 06 Features & benefits... 07
More informationCL-3/1297 CGL INDUSTRIAL POWER INPUT CONNECTORS UP TO 700 V
CL-3/1297 INDUSTRIAL POWER INPUT CONNECTORS UP TO 700 V Contents Introduction... 2 Features... 3 How to Order... 4 Part Number Explanation... 5 Technical Data... 6 250 / 500 Volt Contact Arrangements...
More informationRotations. FPT MIL-DTL Series FPT EMI/EMP. Circular Filter Connectors Features, Alternate Rotations. Filter. FPT Alternate Positions
FPT I-DT-26482 eries ircular onnectors Features, Alternate otations The Amphenol FPT eries combines the unique design features of the miniature PT eries with an EI filter. Intermateable with I-DT-26482
More informationca_b1-b66.qxd:layout 1 2/9/11 7:58 PM Page 1 Mini Circular
Microminiatuare ircular -.050" ontact pacing MIO- MIO- microminiature circular connectors are rugged yet lightweight - and meet or exceed the applicable requirements of MI- T-8353. pplications include
More informationDEUTSCH 9316 SERIES FOR MARINE AND OFFSHORE APPLICATIONS
DUTH 936 I FO MIN ND OFFHO ITION Harsh nvironment, Flameproof onnectors for ugged eliability and afety MIN OI ND G /// 936 I ONTNT Introduction/pecifications 3 ynopsis / ing ystem 4-5 ontact rrangements
More informationSCE. Snatch Connector Electrical Series
SCE Snatch Connector Electrical Series SCE is a miniature product with a silent push to mate and pull to release design across two styles of cable receptacles. All inserts and contacts are moulded in place,
More informationHBB power connector. Product description
HBB power connector Product description Contact technology guarantees high reliability Push lock to mate connector Quick release latch to unmate Ruggedised metal and plastic versions available Cable and
More information983 SERIES CONNECTORS EN2997, ESC10, BACC63 SPECIFICATIONS
DEUTCH 983 ERIE CONNECTOR EN2997, EC10, BACC63 ECIFICATION Extreme Reliability in Harsh Aerospace & Military Applications CONTENT ECTION 1 : ealed Connectors 9 section 1-1 : sealed connectors standard
More informationFeatures and Application
MIL-DTL-38999 Features and Application Series II Features and Application MIL-DTL-38999 Series II connectors feature a bayonet coupling mechanism with lower profile design and rear-removable crimp contact
More information8D Series D38999 Stainless Steel Series
Connector part numbers Basic Series 8D 0-11 K 35 P N L Locking type: None: Receptacle or plug with standard locking V: Plug with reinforced locking Shell style: 0: Square flange receptacle 7: Jam nut receptacle
More informationNow Available in Black Zinc Nickel
847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances
More informationMIL-DTL Series III Connectors
RELIABLE Self-locking threaded coupling 100% scoop proof Contact retention system provides excellent contact retention under severe vibration EMI PROTECTED Grounding fingers for excellent EMI protection
More information38999 Series III Composite Connectors
8D Series Composite 38999 Series III Composite Connectors The RoHS connector with the best performance in weight saving and corrosion resistance for MilAero applications. MIL-DTL-38999 Standard Versatility
More informationVEAM PT. VEAM PT Connectors VEAM PT. Series PT CPT. Military Spec Mil-DTL Series 1 Mil-DTL Series 1
eatures elector and uide enefits V PT eries PT PT ilitary pec il-t-26482 eries il-t-26482 eries arket ilitary/erospace ilitary/erospace oupling ayonet ayonet ax Temperature 25 25 ardware luminum luminum
More informationMICRO-CON-X 2-7 NEW PRODUCT BULLETIN C708
FEATURES & BENEFITS Up to 7 contacts in compact design IP-67 rating, at the face (when mated) IP-67 molded cable assemblies (when mated) All plastic design is light weight Variety of standard options to
More informationCA Bayonet / VG95234 Connectors
CA Bayonet / VG953 Connectors Proven Quality, Reliability & Expertise ITT s Cannon brand is a leading global manufacturer of connector products serving international customers in the aerospace and defense,
More informationAmphenol Miniature Cylindrical Connectors Meets MIL-C-26482, Series 1 Specifications. Amphenol
mphenol iniature ylindrical onnectors 12-070-15 eets I--26482, eries 1 pecifications mphenol Table of ontents age o. Introduction, mphenol iniature ylindrical eneral Information, esign lexibility...................1,
More informationContact resistance : environmental class hermetic class size 20 1 mω 7 mω size mω 3.8 mω size mω 2.4 mω
8525 eries pplications or all general purposes in civil aeronautical applications tandards N 934 H 32 NL 5413 N 3646 M T1 list LN 2954 escription Light weight version of MIL 26482 eries II Intermateable
More informationIBS, incorporated Index Steel Pipe Fittings S T E E L F I T T I N G S
B, incorporated ndex teel ipe ittings A Assortments ipe ittings 9 - Drawer -8, -9 5 - Cabinet - 54 - Bin -0 57-40B Bin -9 ipe ittings -2 45 lbows -2 90 lbows -2 Bell Reducers - Couplings Merchant teel
More information97 series crimp type plugs with solid shells
97 series crimp type plugs with solid shells 97-4106A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/8 34.93 3/4 19.057/8 22.23 5/8-24 12S 1-7/16 36.50 25/32 19.84 1 25.40 5/8-24
More informationMIL-DTL-5015, Matrix. Amphenol. Aerospace. Amphenol
mphenol --5015, atrix O O --5015, atrix esign haracteristics, ustomer Options. 433 nsert vailability and dentification. 434, 435 nsert rrangement rawings. 436-444 lass escriptions, erformance pecifications.
More informationBand Tool Kits M81306/1-01 and M81306/1-02 Operating Instructions
Band Tool Kits M81306/1-01 and M81306/1-02 1 M81306/1 Standard and Micro Tool Overview 4 3 1 6 2 7 5 1 Calibration Access Plug (See Note 3) 2 Tensioning Lever: Squeeze with short gentle strokes to tighten
More informationABCIRH. Connectors. Halogen Free Bayonet Lock Connector Series
Connectors Halogen Free Bayonet Lock Connector Series Company Profile TT Electronics brand AB Connectors specialises in the design, test and manufacture of high performance electronic connectors and interconnect
More information8T Series. MIL-DTL Series II
Contents Overview 8T Series - Presentation... 06 8T Series - Applications... 06 A universal product platform... 07 Space saving... 08 ox solutions... 08 Shell types... 08 Features by shell types... 09
More informationFeatures and Application
ML-DTL-83723 Series Features and Application Bayonet and Threaded Coupling Features and Application ML-DTL-83723 Series family offers connectors with bayonet and threaded coupling including lanyard-release
More informationAmphenol Amphe-Armor Series Rugged Over-molded Connectors
mphenol mphermor eries ugged Overmolded onnectors rugged connector originally designed for the geophysical industry and the exploration of natural resources, where connectors are needed to withstand the
More informationHigh Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type
More informationPART NUMBER BREAKDOWN CP A 70 1 W D H - 10
SERIES 70 EMI/RFI Shielding Backshell Non-Environmental Outer Shield Termination Series 70 Backshells provide EMI/RFI protection using ferrules to secure a cable s outer shield. They do not offer environmental
More informationQwikConnect INTERCONNECT SOLUTIONS INDUSTRIAL STRENGTH GLENAIR JANUARY 2014 VOLUME 18 NUMBER 1
QwikConnect GLENAIR JANUARY 2014 VOLUME 18 NUMBER 1 INDUSTRIAL STRENGTH INTERCONNECT SOLUTIONS INNOVATION Performance Durability Ease of Use Geo-Marine QwikConnect GLENAIR JANUARY 2014 VOLUME 18 NUMBER
More informationEPIC CIRCON M23 Series
M23 Series EPIC EPIC CIRCON M23 Series Application Advantage Rugged nickel-plated, die-cast zinc body Positive vibration protection for use with motor drives and moving assemblies Integral EMC cable gland
More informationQwikConnect INTERCONNECT SOLUTIONS INDUSTRIAL STRENGTH GLENAIR JANUARY 2014 VOLUME 18 NUMBER 1
QwikConnect GLENAIR JANUARY 2014 VOLUME 18 NUMBER 1 INDUSTRIAL STRENGTH INTERCONNECT SOLUTIONS INNOVATION Performance Durability Ease of Use NO GAPS Industrial/Rail Interconnect Solutions Series ITS Reverse-Bayonet
More informationMILITARY MOTORSPORT INDUSTRIAL PRODUCT RANGE
MILITARY MOTORSPORT INDUSTRIAL PRODUCT RANGE ABOUT US VGL Impex Pty Ltd, trading as Allied Connectors, is an Australian based distributor of industrial electrical components and complementary products.
More informationHigh Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,
More informationWaterproof Circular Connectors Conforming to European Safety Standards
Waterproof Circular Connectors Conforming to European Safety Standards CE05 Series Conforming Standard MIL-DTL-5015 Wa t e r p r o o f IP 67 OUTLINE The industrial machinery including the machine tools
More informationAmphenol. AC and SAE AS50151 Threaded Standard Cylindrical Connectors.
mphenol and 50151 ed tandard ylindrical onnectors www.amphenol-industrial.com mphenol 97 eries onnectors are U recognized and recognized. able of ontents age mphenol eries onnectors Introduction/eneral
More informationWILDCAT CONNECTORS
UTSCH WILCAT 38999 CONNCTORS Higher contact densities in a familiar MIL-TL-38999 form factor AROSPAC, FNS & MARIN /// UTSCH WILCAT 38999 CONNCTORS 60 0 80 36 65 88 5 5 8 0 90 70 UTSCH WILCAT 38999 CONNCTORS
More informationConnect - Contact - Control. Circular Audio Miniature Connectors Series NF07 Series NF10 12,5 Ø max. max. cable diameter.
Connect - Contact - Control Ø Ø6 Ø9 Circular Audio Miniature Connectors Series NF07 Series NF0,5 Ø3. max. cable diameter 39.5 max. 4.5 A 58 e Connectors for audio technology: Series NF07 and NF0 Our well-proven
More informationHT STRAIGHT ADAPTER, WRENCH FLATS ( )
HT7006 - STRAIGHT ADAPTER, WRENCH FLATS (12387118) MIL-DTL-38999 SERIES III; MIL-DTL-38999 SERIES IV HT7 0 06-11 - 6-8 SERIES ADAPTER ANGLE STRAIGHT - 0 CONNECTOR SERIES (INTERFACE) FINISH 8 - ELECTROLESS
More informationKPT / KPSE / KPTC Connectors. In Accordance with VG95328
KPT / KPSE / KPTC Connectors In Accordance with VG95328 We Connect When it matters most For more than a century, ITT Cannon has developed innovative interconnect solutions for the world s harshest environments.
More informationExplosion-Proof ORDER CODES 8HN 74, T- R1T185L 48 3
Explosion-roof Explosion-roof, Fixed-Element RTDs are made for use in.. and Canadian hazardous areas. They are designed to extinguish flames inside the device, eliminating the potential for ignition of
More informationA Complete Miniature Range Threaded, Break Away, Bayonet
omplete Miniature Range Threaded, reak way, ayonet onnection Technologies Presentation The micro38999 ranges are made to meet a new generation of applications where space and weight are limited (Tactical
More informationCircular. Cannon VG/CA-Bayonet
Cannon VG/C-Bayonet Introduction Cannon C-Bayonet series was designed in accordance with the VG95234 specification. This versatile and highly reliable connector series is an improvement on the well established
More informationDEUTSCH HDJ Series Filter Connectors MIL-DTL SERIES I.5
DEUTSCH HDJ Series connectors are subminiature environment-class connectors with high and medium-density insert arrangements. They are based on MIL-DTL-38999 Series I coupling interface lengths and Series
More information