983 SERIES CONNECTORS EN2997, ESC10, BACC63 SPECIFICATIONS
|
|
- Sharyl Alexander
- 6 years ago
- Views:
Transcription
1 DEUTCH 983 ERIE CONNECTOR EN2997, EC10, BACC63 ECIFICATION Extreme Reliability in Harsh Aerospace & Military Applications
2 CONTENT ECTION 1 : ealed Connectors 9 section 1-1 : sealed connectors standard 10 section 1-2 : sealed connectors with integral accessory 12 section 1-3 : arrangements 14 section 1-4 : ART-NUMBERING 17 TANDARD AD-TAN ECTION 2 : Hermetic Receptacles 21 section 2-1 : hermetic receptacles stainless steel 22 section 2-2 : arrangements 24 section 2-3 : ART-NUMBERING 27 TANDARD AD-TAN ECTION 3 : Backshells 29 section 3-1 : open backshells 30 section 3-2 : open backshells for K6 and Quadrax arrangements 32 section 3-3 : closed backshells for K6 and Quadrax arrangements 32 ECTION 4 : rotective Covers 33 ECTION 5 : Dummy Receptacles 35 ECTION 6 : anel eals 37 ECTION 7 : Mated & Unmated Dimensions 39 section 7-1 : for sealed connectors 40 section 7-2 : for sealed connectors with integral accessory 41 section 7-3 : for hermetic receptacles 42 ECTION 8 : Contacts & Tooling 43 TE Components... TE Technology... TE Know-how... AM AGATAT CII HARTMAN KILOVAC MICRODOT NANONIC OLAMCO Raychem Rochester DEUTCH EACON hoenix LL Rowe hoenix Optix AF EACON Get your product to market faster with a smarter, better solution. AGE 2
3 DEUTCH 983 ERIE CONNECTOR INTRODUCTION HIGH RELIABILITY elf-locking system HARH ENVIRONMENT REITANCE High temperature operating (260 C) Fireproof inserts (thermoset and fluorinated silicon) Fluid resistant inserts ALICATION-MATCHED VERION ealed stainless steel ealed aluminum Hermetic stainless steel Hermetic aluminum HERMETIC ALUMINUM IMROVED ERFORMANCE Aluminum shell (weight saving) Nickel plated shells (better continuity) Copper alloy contacts (higher intensity) Glass-to-metal sealing TE Connectivity s (TE) DEUTCH 983 series connector was created in the 90 s. This connector has been especially designed for harsh environment aircraft zone applications such as engines and boosters. Available in two versions, TE s DEUTCH 983 series connector is used in its stainless steel version on harsh constraint-facing areas such as engines, landing gears, AU (Auxiliary ower Unit), wings, pylons, leading edges whereas the aluminum version is used in cargo compartments. Qualified to EN2997 specification for its stainless steel and aluminum version, TE s DEUTCH 983 series is also qualified to AD (Aerospace Defense and ecurity) EC10, Boeing BACC63 and Airbus AB specifications. In addition, TE s DEUTCH 983 series is fully intermateable with MIL-DTL eries III connectors. TE s DEUTCH 983 series connector uses contacts qualified to the EN3155 and AD EC30 specifications. TE s DEUTCH 983 eries connectors are distinguishable from MIL-DTL connectors by following improvements : - hell-to-shell metal bottoming (plug and receptacle mated) - Anti-rotation system on 360 by tightening - elf-locking system all plug - Reduced elastomer barriers to use new and old generations of wires All TE s DEUTCH 983 electrical connectors series are intermateable and interchangeable with connectors in accordance with MIL-DTL series III. A large accessories range completes TE s DEUTCH 983 connector series : - Backnut - traight cable clamp - 90 cable clamp LARGE ACCEORIE RANGE Backnut traight cable clamp 90 cable clamp Custom design 1 Connector s rear part fitted with a teeth anti-rotation system (360 ) assuming an effective tightening and clamping of accessories / EMI shielding improvement 2 elf locking control 3 hell to shell metal bottoming 4 RFI grounding fingers for electrical continuity between plug and receptacle 5 Individual contact sealing at coupling stage by compression of elastomer conical risers on hard insert 6 Interface sealing assumed by High Frequency (H.F.) gasket 7 hell/insert assumed by potting 8 ealing on each wire thanks to several sealing barriers AGE 3
4 YNOTIC FOR EALED RECETACLE Nut ACCEORIE traight Cable Clamp RECETACLE TYE 0 TYE 7 ealed quare Flange Receptacle ealed Jam-Nut Mounting Receptacle Elbowed Cable Clamp YNOTIC FOR EALED RECETACLE WITH INTEGRAL ACCEORY TYE 2 RECETACLE quare Flange Receptacle with Integral Accessory TYE 3 Jam-Nut Receptacle with Integral Accessory AGE 4
5 YNOTIC FOR HERMETIC RECETACLE TYE 0 HERMETIC RECETACLE TYE 1 Hermetic quare Flange Receptacle Hermetic older Receptacle TYE 7 Hermetic Jam-Nut Mounting Receptacle AGE 5
6 YNOTIC FOR EALED LUG Nut TYE 6 ACCEORIE traight Cable Clamp LUG ealed lug without EMI Ring TYE 6 Elbowed Cable Clamp ealed lug with EMI Ring YNOTIC FOR EALED LUG WITH INTEGRAL ACCEORY LUG TYE 7 AGE 6
7 TECHNICAL CHARACTERITIC Mechanical Models of connectors A W W R R K Y KE E YE KV V KF F hell Material tainless steel Aluminum nickel Aluminum olive drab cadmium Aluminum black anodized Insert Material Thermo-setting ilicone intered glass Contacts Type Crimp type, removable, gold plating older type, non removable, gold plating Version ealed Hermetic Temperature ranges -65 C to 175 C -65 C to 200 C -65 C to 260 C cyclique Fire resistance as per EN Fire test as per EN Connector with self-locking control Mechanical endurance 250 operations 500 operations hielding RFI on plug Corrosion (salt spray) as per EN hours 500 hours Vibrations as per EN , method B (10 to 2000 Hz along 2 axes) Vibrations as per EN , method C hocks as per EN g/3ms ealed m3/h / 100 ka Electrical Insulation resistance At 25 C and 65% R.H > 5000 MΩ At 260 C and 65% R.H > 1000 MΩ Dielectric withstanding voltage At sea level 1500 Vrms 50 Hz mated connectors At meters altitude 1000 Vrms 50 Hz mated connectors At meters altitude 200 Vrms 50 Hz unmated connectors hielding efficiency as per EN MHz to 1 GHz models R - W - - E - V - F AGE 7
8 KEY ORIENTATION lug Front View Master Key A B C D Keying osition Key/Keyway locations in degrees ize 8 ize 10 ize 12 to 28 A B C D A B C D A B C D N-Normal Y Keying osition Key/Keyway locations in degrees for T and V polarisations (230V only) ize 12 and 14 ize 20 A B C D A B C D T V Note : Keying positions T and V do not apply to shell sizes 08, 10, 16, 18, 22, 24 and 28. AGE 8
9 ECTION 1 ealed Connectors AGE 9
10 ECTION 1.1 ealed Connectors tandard RECETACLE quare Flange TYE max ± max. B C 4 holes 3.05 ± 0.10 sizes 08 to 22 4 holes 3.80 ± 0.10 size 24 and 28 C F G C B H C max. 4 holes 3.20 ± 0.10 sizes 08 to 22 4 holes 3.80 ± 0.10 size 24 and 28 V Mounting styles with 4 screws ize B C ±0.05 F G Max H Min. V Min. Weight (g) tainless steel Aluminum Without contact Dimensions in mm Overal dimensions and characteristics are given for indication guidance only. TE Connectivity reserves the right to modify them for production improvement reasons (roprietary products only). AGE 10
11 Jam-Nut Mounting TYE max ±0.15 E B M N F G H max. A V Mounting styles with panel cutouts ize A B E F G H M N V Min. Weight (g) tainless steel Aluminum Tightening torque of panel nut m.n max m.n max m.n max m.n max m.n max m.n max m.n max m.n max m.n max m.n max. Without contact LUG Dimensions in mm tainless teel Aluminum max max. TYE 6 A G A G max. ize A G Weight (g) tainless steel Aluminum max Without contact Dimensions in mm Overal dimensions and characteristics are given for indication guidance only. TE Connectivity reserves the right to modify them for production improvement reasons (roprietary products only). AGE 11
12 ECTION 1.2 ealed Connectors with Integral Accessory RECETACLE quare Flange TYE Y B C 4 holes 3.05 ± 0.10 sizes 08 to 22 4 holes 3.80 ± 0.10 size 24 and 28 C R F X Q W C B H C 1.50 ± ± ± holes 3.20 ± 0.10 sizes 08 to 22 4 holes 3.80 ± 0.10 size 24 and 28 V Mounting styles with 4 screws ize B C ±0.05 R ±0.10 F ±0.10 Y X ±0.10 Q ±0.10 W ±0.25 H Min. V Min Dimensions in mm Overal dimensions and characteristics are given for indication guidance only. TE Connectivity reserves the right to modify them for production improvement reasons (roprietary products only). AGE 12
13 Jam-Nut Mounting TYE B G N R F X Q W H ± ±0.20 V Mounting styles with panel cutouts ize B G R ±0.10 F ±0.10 X ±0.10 Q ±0.10 W ±0.25 N H V Min. Tightening torque of panel nut m.n max m.n max m.n max m.n max m.n max m.n max m.n max m.n max m.n max m.n max. LUG Dimensions in mm TYE ize R ±0.10 F ±0.10 X ±0.10 Q ±0.10 W ± max ± ±0.20 R F X Q W Dimensions in mm Overal dimensions and characteristics are given for indication guidance only. TE Connectivity reserves the right to modify them for production improvement reasons (roprietary products only). AGE 13
14 ECTION 1.3 Arrangements Male Insert. Front Face View contacts size contacts size contacts size contacts size contacts size contacts size contacts size contacts size contacts size contacts size contacts size contacts size 20 3 contacts size 16 Consult TE Technical upport not EC10 O not EN2997 AGE 14
15 Male Insert. Front Face View contacts size contacts size contacts size contacts Quadrax or 2 K6 contacts O contacts size contacts size contacts size contacts Quadrax or 4 K6 contacts O contacts size contacts size contacts size 20 6 contacts size contacts size contacts size 20 2 contacts size contacts size contacts size contacts size contacts size 20 6 contacts size 12 Consult TE Technical upport not EC10 O not EN2997 AGE 15
16 Male Insert. Front Face View 26 contacts size contacts size contacts size contacts size contacts Quadrax 39 contacts size contacts size 20 BB AA O 23 contacts size contacts size contacts size 20 2 contacts size contacts size contacts size 20 6 contacts Quadrax or 6 K6 contacts O 42 contacts size 16 EE Consult TE Technical upport not EC10 O not EN2997 Arrangements Quadrax or K6 izes and number of contacts Arrangements Quadrax or K6 Arrangements Quadrax Quadrax or K6 AGE 16
17 ECTION 1.4 art-numbering DEUTCH ART NUMBERING YTEM Example of order: 983-6E N-L E N- L Connector type hell type 0 ealed square flange receptacle 6 lug 7 ealed round flange receptacle Connector model A-W-W-R-R-K--KE-E-KV-V-KF-F (W-R-K-KE : plug only) hell size Arrangements see section 1.3 Contact type Male contact Female contact Key orientation N Y T - V 230V only Index for contact L Connector without contact Without index Connector with contacts special modifications : Consult TE Technical upport AGE 17
18 DEUTCH ART NUMBERING YTEM FOR CONNECTOR WITH INTEGRAL ACCEORY Example of order: KV N-L KV N- L Connector type Connector model A-W-W-R-R-K--KE-E-KV-V-KF-F (W-R-K-KE : plug only) hell type 2 square flange receptacle with integral accessory 3 jam-nut receptacle with integral accessory 7 plug with integral accessory hell size Arrangements see section 1.3 Contact type Male contact Female contact Key orientation N Y Index for contact L Connector without contact Without index Connector with contacts special modifications : A1499 for KE and E only For other modifications, Consult TE Technical upport AGE 18
19 AD-TAN ART NUMBERING YTEM Example of order: EN2997E61203FN EN2997 E F N Connector type Connector model W-W-R-R-K--KE-E-KF-F-KV-V (W-R-K-KE : plug only) hell type 0 ealed square flange receptacle 6 lug 7 ealed jam-nut mounting receptacle A quare flange receptacle with integral accessory B Jam-nut mounting receptacle with integral accessory C lug with integral accessory hell size Arrangements see section 1.3 Contact type M Male standard contact F Female standard contact A Delivered without Male contact B Delivered without Female contact C pecial male contact size 20, with barrel size 18 D pecial female contact size 20, with barrel size 18 Key orientation N Y AGE 19
20 EC10 ART NUMBERING YTEM Example of order: EC10E61203NO EC10 E N O Connector type Connector model KE-E hell type 0 ealed square flange receptacle 6 lug hell size Arrangements see section 1.3 Contact type Male contact Female contact Key orientation N Variant identifier (alphabetic) O No minor variation AGE 20
21 ECTION 2 Hermetic Receptacles AGE 21
22 ECTION 2.1 Hermetic Receptacles tainless teel Receptacle quare Flange TYE max ± max. B C 4 holes 3.05 ± 0.10 sizes 08 to 22 4 holes 3.80 ± 0.10 size 24 C F G C B H C V Mounting styles with 4 screws ize B C ±0.05 F G H Min. max ize V Min. Weight (g) stainless steel Dimensions in mm Overal dimensions and characteristics are given for indication guidance only. TE Connectivity reserves the right to modify them for production improvement reasons (roprietary products only). AGE 22
23 Receptacle Jam-Nut Mounting TYE ± 0.15 E B N F M H A V Mounting styles with panel cutouts ize A B Receptacle older Round Flange E F H Min. M N ize V Min. Weight (g) tainless steel Tightening torque of panel nut m.n max m.n max m.n max mn. max mn. max m.n max m.n max mn. max mn. max. Dimensions in mm TYE ± max 1.55 max F G A H ize A ± F G H Min. ize V Min. Weight (g) Dimensions in mm tainless teel shell exempt of sulphur to help withstand Electron Beam (E.B.) welding and laser. Overal dimensions and characteristics are given for indication guidance only. TE Connectivity reserves the right to modify them for production improvement reasons (roprietary products only). V Mounting styles solder flange AGE 23
24 ECTION 2.2 Arrangements Male Insert. Front Face View contacts size contacts size contacts size contacts size contacts size contacts size contacts size contacts size contacts size contacts size 22 7 contacts size contacts size 20 3 contacts size contacts size contacts size contacts size 16 2 contacts K6 Aluminum, please consult TE Technical upport Consult TE Technical upport For K6 contacts, specify wire AWG AGE 24
25 Male Insert. Front Face View contacts size contacts size contacts size contacts K contacts size contacts size 20 6 contacts size contacts size 20 4 contacts size contacts size 20 2 contacts size contacts size contacts size contacts size contacts size 20 6 contacts size contacts size contacts size contacts size contacts size contacts size 20 Aluminum, please consult TE Technical upport Consult TE Technical upport For K6 contacts, specify wire AWG AGE 25
26 contacts size contacts size contacts size contacts size contacts size contacts size contacts K contacts size 16 EE Aluminum, please consult TE Technical upport Consult TE Technical upport For K6 contacts, specify wire AWG izes and number of contacts Arrangements K6 Arrangements K6 Arrangements K Consult TE Technical upport AGE 26
27 ECTION 2.3 ART-NUMBERING DEUTCH ART NUMBERING YTEM Example of order: 983-1YE N YE N Connector type hell type 0 quare flange receptacle 1 older receptacle 7 Jam-nut receptacle Connector model Y-YE for receptacle only hell size Arrangements : see section 2.2 Contact type Male contact Female contact, consult TE Technical upport Insert clocking position N Y No Aluminum Hermetic according to EN2997 and EC 10 specifications. For any inquiry concerning Aluminum Hermetics, please consult TE Technical upport. AGE 27
28 AD-TAN ART NUMBERING YTEM Example of order: EN2997YE12255MN EN2997 YE M N Connector type Connector model Y-YE hell type 0 quare flange receptacle 1 older receptacle 7 Jam-nut mounting receptacle hell size Arrangements : see section 2.2 Contact type M Male standard contact Insert clocking position N Y EC10 ART NUMBERING YTEM Example of order: EC10YE12255NO EC10 YE N O Connector type Connector model YE hell type 1 older mounted receptacle 2 quare flange receptacle 3 Jam-nut mounting receptacle hell size Arrangements : see section 2.2 Contact type Male standard contact Insert clocking position N Y Variant identifier (alphabetic) O no minor variation B eyelet termination AGE 28
29 ECTION 3 Backshells AGE 29
30 ECTION 3.1 Backshells Nut art number ize tainless steel Alu. nickel Alu. cadmium Alu. black anodized A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Models K--KE-E KV-V-KF-F Used for connectors R-R W-W A traight Cable Clamp art number ize tainless steel Alu. nickel Alu. cadmium Alu. black anodized A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Models K--KE-E KV-V-KF-F Used for connectors R-R W-W A AGE 30
31 90 Cable Clamp art number ize tainless steel Alu. nickel Alu. cadmium Alu. black anodized A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Models K--KE-E KV-V-KF-F Used for connectors R-R W-W A AGE 31
32 ECTION 3.2 Open Backshells for K6 and Quadrax Arrangements (18-02, 20-04, 28-06) Accessories with straight cable clamp 43 max. AWG cable 0 without sleeve / (stainless steel) (aluminum) (stainless steel) (aluminum) (stainless steel) (aluminum) ECTION 3.3 Closed Backshells for K6 and Quadrax Arrangements (18-02, 20-04, 28-06) EMI shielding backshell 43 max. (AB 1452) (stainless steel) (stainless steel) (stainless steel) (aluminum) (aluminum) (aluminum) AGE 32
33 ECTION 4 rotective Covers AGE 33
34 ROTECTIVE COVER For Receptacle 20 max. art Number 3.20 ± 0.10 A tainless steel Alu. nickel Alu. cadmium 983-3KE R W- Used for connectors Models K--KE-E KV-V-KF-F R-R W-W max. Note: same protective cover whatever the connector keying position L1 C : With chain and small eyelet D : With cord and small eyelet N : Without chain or cord and with holes for locking wire : hell size For lug max art Number tainless steel Alu. nickel Alu. cadmium 983-4KE R W ± 0.10 A1 Models K--KE-E KV-V-KF-F Used for connectors R-R W-W Note: same protective cover whatever the connector keying position C : With chain and small eyelet D : With cord and small eyelet N : Without chain or cord and with holes for locking wire : hell size L1 ize A A1 L1 ±6.25mm Dimensions in mm Overal dimensions and characteristics are given for indication guidance only. TE Connectivity reserves the right to modify them for production improvement reasons (roprietary products only). AGE 34
35 ECTION 5 Dummy Receptacles AEROACE, AEROACE, DEFENE DEFENE & MARINE MARINE /// /// DEUTCH DEUTCH ERIE ERIE CONNECTOR CONNECTOR AGE 35
36 Dummy Receptacles 1.80 max ± 0.15 B C ize B C ±0.05 F F 4 holes 3.20 ±0.10 sizes 08 to 22 4 holes 3.80 ±0.10 sizes 24 and 28 C B Dimensions in mm DEUTCH ART NUMBERING YTEM Example of order: 983-0KE-R KE- R 10 Connector type hell type 0 ealed square flange receptacle Connector model A-R-W-K-KE R Dummy receptacle hell size Overal dimensions and characteristics are given for indication guidance only. TE Connectivity reserves the right to modify them for production improvement reasons (roprietary products only). AGE 36
37 ECTION 6 anel eals AGE 37
38 ANEL EAL Only for quare Flange Receptacle Connectors do not include panel seals. lease order panel seals separately. For part numbers and dimensions, please contact TE Technical upport. Front Flange Mounting Rear Flange Mounting anel seals are available in: - Nylon tissue impregnated with chloroprene - Aramid tissue impregnated with fluoroelastomer - Fluoro-silicon - ilicon elastomer reinforced with glass tissue AGE 38
39 DEUTCH 983 eries Connectors ECTION 7 Mated & Unmated Dimensions AEROACE, DEFENE DEFENE & & MARINE MARINE /// /// DEUTCH DEUTCH ERIE ERIE CONNECTOR CONNECTOR AEROACE, AGE AGE 39 39
40 ECTION 7.1 For ealed Connectorst. quare Flange max max max. TYE 6 TYE 0 Note: dimension given with panel seal. Jam-Nut Mounting 3.20 max max max max max. TYE 6 TYE max max. Overal dimensions and characteristics are given for indication guidance only. TE Connectivity reserves the right to modify them for production improvement reasons (roprietary products only). AGE 40
41 ECTION 7.2 For ealed Connectors with Integral Accessory quare Flange 49 max max max. TYE 7 TYE 2 Jam-Nut Mounting 3.20 max. 26 max. 60 max. 62 max. 49 max max. TYE 7 TYE 3 Overal dimensions and characteristics are given for indication guidance only. TE Connectivity reserves the right to modify them for production improvement reasons (roprietary products only). lugs and receptacles mating possibilities 26 max. 62 max. Temperature class 175 C 200 C 200 C 260 C Cyclic hells material Aluminum Aluminum tainless steel tainless steel lugs W / W or A R or R K or E/KE, KF/F, KV/V Receptacles W or A R Y or YE E F V All other plug / receptacle combinations are under user s responsibility. AGE 41
42 ECTION 7.3 For Hermetic Receptacles. quare Flange max max max. TYE 6 TYE 0 older Hole Mounting 3.20 max max max max max. TYE 6 TYE 1 Jam-Nut Mounting max max max. TYE 6 TYE 7 Overal dimensions and characteristics are given for indication guidance only. TE Connectivity reserves the right to modify them for production improvement reasons (roprietary products only) max. AGE 42
43 ECTION 8 Contacts & Tooling AGE 43
44 CONTACT For R - R - K - - W - W MODEL For KE - E - KV - V - KF - F MODEL Color code 1 2 Color code 2 1 Color code 1 2 Color code 2 1 Inspection hole Male contact Inspection hole Female contact White dot Inspection hole Male contact Inspection hole Female contact White dot Models R - R - K - - W - Ws Models KE - E - KV - V - KF - F NRG band N Reference A A A A A A A A A A A A CONTACT Type ize Mark or Color 1 2 White Dot ection in mm 2 CABLE AWG Wire Finished Wire Dia. 22 Green to to to Red to to to Blue to to to Yellow to to to Brown Red to to to White Red to to to White Blue to to to Red Blue Yes 0.25 to to to White Blue to to to Green Yes 0.15 to to to Red Red Yes 0.25 to to to Green Red Yes Blue Blue Yes 0.60 to to to White Blue Yes 1.00 to to to Yellow Yes 2.00 to to to 4.00 Observations tandards contacts delivered with connector tandards contacts delivered with connector tandards contacts delivered with connector tandards contacts delivered with connector Contacts to be ordered separately Contacts to be ordered separately Contacts to be ordered separately Contacts to be ordered separately Contacts to be ordered separately tandards contacts delivered with connector tandards contacts delivered with connector Contacts to be ordered separately tandards contacts delivered with connector Contacts to be ordered separately tandards contacts delivered with connector Red Red Yes 0.25 to to to 2.10 NRG band contacts Blue Blue Yes 0.60 to to to 2.70 NRG band contacts Yellow Yellow Yes 2.00 to to to 4.00 NRG band contacts Closest American Wire Gauge Dimensions in mm AGE 44
45 CONTACT Current nominal rating (as per cables used - see table below) Contact Type tandard ize tandard cables Code Conductors sizes Fire resistant cables as per EN 2234 Code Maximum permissible current rating per contact (Amp.) Connector Contact Bucket AD AWG AD AWG ealed Hermetic pecific Closest American Wire Gauge Dimensions in mm CONTACT AND TOOL EALING LUG TOOL ize art number Color code Crimping tool ilot stop Tool insertion trip length in mm Black M22520/2-01 M22520/ to Red M to Blue M22520/1-01 or M22520/1-02 or M to Yellow M to 7.30 AGE 45
46 QUADRAX CONTACT For arrangements 18-02, and CONTACT KIT (CONTACT + LEEVE) TOOL Arrangements Com. part number Type ize For size 24 contacts For contact body Extraction tool M22520/ M22520/ K M22520/5-45B M22520/ M22520/ K M22520/5-45B M22520/ M22520/ K M22520/5-45B OWER CONTACT K6 For arrangements 18-02, and only -200 C : KIT CONTACT (contacts + sleeve) Commercial N Type A A A Wire size 6 8 DECOMOITION OF THE KIT COLOR CODE TOOL EALING LUG Contact N leeve 1 2 Crimping tool ositioner Extraction tool K A A Green Green M22520/23-01 M22520/ A Green Red M22520/23-01 M22520/ A A Green Brown M22520/23-01 For AWG12: T1498 For AWG10: WA A OWER CONTACT K6 For arrangements 18-02, and only -260 C : KIT CONTACT (contacts + sleeve) Commercial N Type Wire size 6 8 DECOMOITION OF THE KIT COLOR CODE TOOL EALING LUG Contact N leeve 1 2 Crimping tool ositioner Extraction tool K Green Green M22520/23-01 M22520/ A Green Red M22520/23-01 M22520/ A Green Brown M22520/23-01 For AWG12: T1498 For AWG10: WA A AGE 46
47 THERMOCOULE CONTACT Commercial N Type ize CONTACT Color code White Dot ind. Observation 20 Red Red - Yes Yellow Ch 20 Red Red - Yes Black Al 20 urple Red - - Black Al 20 urple Red - - Yellow Ch 16 Blue Blue - - Yellow Ch 16 Blue Blue - - Black Al Enlarged barrel CABLE EALING LUG CRIMING TOOL INERTION AND EXTRACTION TOOL ize ection Min.- AWG art number Color art number ilot stop mm 2 Insertion Wired contacts Extraction Red M 22520/1-01 M 22520/1-02 M M Enlarged Red M 22520/1-01 M 22520/1-02 M M Blue M 22520/1-01 M 22520/1-02 M M Closest American Wire Gauge AGE 47
48 LET CONNECT We make it easy to connect with our experts and are ready to provide all the support you need. Just call your local support number or visit to chat with a roduct Information pecialist. Technical upport te.com/support-center North America North America (Toll) EMEA/outh Africa EMEA (Toll) India (Toll-Free) Asia acific Japan Australia New Zealand +64 (0) te.com/deutsch983 DEUTCH, AM, AGATAT, CII, HARTMAN, KILOVAC, LL Rowe, MICRODOT, NANONIC, OLAMCO, Raychem, EACON, TE, TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity s obligations shall only be as set forth in TE Connectivity s tandard Terms and Conditions of ale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application TE Connectivity Ltd. family of companies All Rights Reserved /16
49 Mouser Electronics Authorized Distributor Click to View ricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: 983-1YE N 983-0YE N 983-0Y N 983-0Y N 983-0Y N 983-0YE N 983-1Y N 983-1Y N 983-1YE N
ACT AND DTS SERIES CONNECTORS EN3645 SPECIFICATION QUALIFIED
DEUTSCH ACT AND DTS SERIES CONNECTORS EN3645 SPECIFICATION QUALIFIED Reliable and Versatile Range of Connectors for Harsh Environment Aerospace and Military Applications CONTENTS Introduction 03 Technical
More informationBRANCHE CONNECTEURS AEROMILITAIRES. AFD series Norme MIL-C G. Series 2
RN ONNTUR ROMIITIR series Norme MI- 26482 eries 2 ummary Introduction 1 dvantage 2 Technical characteristics 3 art-numbering system 4 tandard equivalence 5 ynoptic 6 rrangements 8 Receptacles 10 lugs 14
More informationPOLAMCO HIGH POWER CONNECTORS STYLE
POLAMCO HIGH POWER CONNECTORS 38999 STYLE Robust & reliable connectors designed for harsh environments Contents Part Description System... 4 Materials... 4 Plating Options... 5 SECTION ONE: Plugs 1.1 Shielded
More informationElectrical Dielectric withstanding Altitude Service At ground 1500 Vrms m 600 Vrms m 400 Vrms m 200 Vrms
Applications Engine area/sensors in harsh environments, railways (brake system), for all purposes in severe climatical environment and high temperature. Standards NFL 54143 - EN 2997 Description Screw
More informationWILDCAT CONNECTORS
UTSCH WILCAT 38999 CONNCTORS Higher contact densities in a familiar MIL-TL-38999 form factor AROSPAC, FNS & MARIN /// UTSCH WILCAT 38999 CONNCTORS 60 0 80 36 65 88 5 5 8 0 90 70 UTSCH WILCAT 38999 CONNCTORS
More informationElectrical Test voltage (Vrms) Service sea level at m M I II
8LT eries Applications High density connectors for all military and aeronautical purposes. tandards MIL-C 38999 eries I - QPL approved NC 93422 HE 308 DTAT-C 5935 X 0005 (HE 308 standard) GAM/T1 list Description
More informationMIL-DTL SERIES III CONNECTORS RUGGED, HARSH ENVIRONMENT SUBMINIATURE CONNECTORS
QUICK REFERENCE GUIDE Wide Range Mil spec, commercial, and composite Full line of finishes, including black zinc nickel and PTFE nickel High Performance Environmentally sealed DEUTSCH MIL-DTL-38999 SERIES
More informationMIL-DTL Series IV Connectors
DEPENDABLE Secure breech lock coupling 100% scoop-proof Pin-to-pin mating protection helps prevent failures RUGGED Mated connectors help withstand high-impact shock Rear accessory threads help provide
More informationContact resistance : environmental class hermetic class size 20 1 mω 7 mω size mω 3.8 mω size mω 2.4 mω
8525 eries pplications or all general purposes in civil aeronautical applications tandards N 934 H 32 NL 5413 N 3646 M T1 list LN 2954 escription Light weight version of MIL 26482 eries II Intermateable
More informationD X X - XX - XX - X X
CONSTRUCTION MATERIAL FINISH Shell Alluminium Alloy Cadmium Olive Drab over Electroless Nickle Electroless Nickle Insert Engineering Plastic Natural O-ring Silicone Rubber Natural Contact Retainer Beryllium
More informationContact resistance : environmental class hermetic class
525 eries pplications or all general purposes in civil aeronautical applications tandards N 93422 32 NL 5413 N 1599 M T1 list LN 2954 escription Light weight version of MIL 2642 eries II Intermateable
More informationMIL-DTL Series III Connectors
RELIABLE Self-locking threaded coupling 100% scoop proof Contact retention system provides excellent contact retention under severe vibration EMI PROTECTED Grounding fingers for excellent EMI protection
More informationIntegrated Backshell Fire Proof Connector
8535/8536 Series Integrated Backshell Connectors Integrated Backshell Fire Proof Connector Stainless steel screw coupling connector designed for use in aviation harsh environments. Perfect for engines
More information38999 Series III Composite Connectors
8D Series Composite 38999 Series III Composite Connectors The RoHS connector with the best performance in weight saving and corrosion resistance for MilAero applications. MIL-DTL-38999 Standard Versatility
More informationHIGH DENSITY INTERCONNECTS HD38999
HIGH DENITY INTERCONNECT HD38999 PD-229-2 PD-208-26 A CONNECTOR THAT TART AT 9 GOE TO 87 CONTACT The HD38999 family of connectors has 30% more contact density than the highest density il pec 38999 connectors
More informationCheminax RF Coaxial Cables and RF Connectors
Cheminax RF Coaxial Cables and RF Connectors QUICK REFERENCE GUIDE Convenient Lightweight, small diameter Extended temperature range High Performance High flexibility Low capacitance Low attenuation HIGHER
More informationTHREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS
MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL
More information38999 All In One! Series III Integrated Backshell
38999 Series III Integrated Backshell 38999 All In One! Plug with integrated backshell: all the features and the benefits of 38999 Series III connectors now ready to use. Embedded backshell EMI backshell
More information891/2 Series. Description. Applications. Standards MIL-C 5015 G, class K NFL 54140
Applications Aircraft engines High temperature applications tandards IC 5015 G, class NF 54140 Description crew coupling High temperature connector for severe environment Fire resistant and fire wall High
More informationEN3716 SAE AS81659 ARINC
6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical
More informationECONOMY POWER 2.5 CONNECTORS
ECONOMY POWER 2.5 CONNECTORS The Economy Power 2.5 (EP 2.5) connector is a single row or dual row crimp connector system. Based on a 2.5mm (0.098 ) centerline pitch, it is a very compact solution. EP 2.5
More informationAmphenol. Amphenol /Matrix MIL-C-83723, Series III Connectors. Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments
Amphenol /Matrix MIL-C-, Series III Connectors -0- Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments Amphenol This catalog covers the Amphenol /Matrix MIL-C-, Series
More informationSRC SERIES. Signal Connectors with bayonet locking system. Derived from VG95234 & in accordance with the NF F standard
SERIES Signal Connectors with bayonet locking system Derived from VG9523 & in accordance with the NF F 61-030 standard SERIES /// SIGNAL CONNECTORS Contents Main Characteristics... 2 Synoptic...3- Synoptic:
More informationTABLE OF CONTENTS. Amphenol Aerospace is a Certified ISO 9001 Manufacturer.
This catalog covers the Amphenol /Matrix MIL-C- 83723, Series III Connectors. These connectors incorporate crimp rear release contacts. There is great diversity within this cylindrical family, with the
More information8D Series D38999 Aluminum Series
onnector part numbers Basic Series 8D 0-11 W 35 P N L style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI shielding Also available:. Square flange receptacle
More informationCompact Low Profile Connectors with High Hermeticity Performance
EN2997 Hermetic Connectors Compact Low Profile Connectors with High Hermeticity Performance Adapted to sensor applications under high aeronautical constraints, such as engine & landing gear environments.
More informationFeatures and Application
MIL-DTL-38999 Features and Application Series II Features and Application MIL-DTL-38999 Series II connectors feature a bayonet coupling mechanism with lower profile design and rear-removable crimp contact
More informationAmphenol 348 Series High Density Connectors
348 Series High Density Connectors 12-093-6 348 Series I, II Table of Contents 348 Series Page No. High Density Connectors........................................................................ 1 Specifications.................................................................................
More informationHigh Density Interconnects
Contents ection Description Pages Insert rrangement 40 How To Order HD38999 4 Contact and Technical Data 42 Receptacles Wall ount Receptacle 43 Wall ount Double Flange Receptacle 43 Line Receptacle 44
More informationMIL-C Series 4 PART NUMBER CONSTRUCTION
MIL-C-38999 - eries 4 PART NUMBR CONTRUCTION D38999 / 40 W F 35 P N Alternative Orientation Contact Type Insert Configuration Class tyle Military Prefix COD HLL TYL COD HLL IZ / 40 Wall Mount Receptacle
More information9316 series Underwater applications Explosion proof Hermetically sealed
Branche Connecteurs Offshore 9316 series Underwater applications Explosion proof Hermetically sealed Summary 9316 1 Introduction 2 Presentation 3 Technical characteristics 4 Synopsis 5 Part-numbering system
More information97 series crimp type plugs with solid shells
97 series crimp type plugs with solid shells 97-4106A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/8 34.93 3/4 19.057/8 22.23 5/8-24 12S 1-7/16 36.50 25/32 19.84 1 25.40 5/8-24
More informationTE Connectivity DEUTSCH Single Module EN4165 connectors
Applications Cabin and avionic systems High-performance military aircraft Commercial airlines Communications equipment Missiles Military Railway TE Connectivity DEUTSCH Single Module EN4165 Connectors
More informationEthernet 100 Mbps Quadrax
Ethernet 100 Mbps Quadrax Quadrax Contact Today s technology for Airbone and Military equipment is more and more complex, requiring the management of an increasing flow of information at greater speeds.
More informationMIL-DTL 38999Series III Aluminium Series
MIL-DTL 38999Series III Aluminium Series 13 Connector part numbers Basic Series 8D 0-11 W 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI
More information8STA/8TA Series. Compact Circular Connectors Derived from MIL-DTL & JN1003. Connection Technologies
8STA/8TA Series Compact Circular Connectors Derived from MIL-DTL-38999 & JN1003 Connection Technologies 8STA/8TA Series Contents Overview Presentation... 06 Applications... 06 Features & benefits... 07
More informationAmphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003
Amphenol eries SJT Series SJT VG 96912, Series 1 PAN 6433-2 JN 1003 Ordering information Ordering example: SJT G 06 RT 14-35 P A 014 Series (p. 9, 15, 18) SJT Scoop proof (100% scoop-proof) Junior (Miniature
More informationCMC/CPP/CMB SERIES. Power & signal connectors with screw locking system. Human photo. Can be environmental/ documentaty style or portrait of engineer.
Human photo. Can be environmental/ documentaty style or portrait of engineer. CMC/CPP/CMB SERIES Power & signal connectors with screw locking system CMC/CPP/CMB SERIES /// POWER & SIGNAL CONNECTORS Contents
More informationMIL-C (Series 1, 2, 3 & 4) Updated February 2013 (Rev )
MIL-C-3 (Series, 2, 3 & 4) Updated February 23 (Rev 23-2) ABN: 6 2 6 24 The D3 Series of connectors were designed for both performance and mechanical robustness to meet many demanding applications in:
More informationDEUTSCH HDJ Series Filter Connectors MIL-DTL SERIES I.5
DEUTSCH HDJ Series connectors are subminiature environment-class connectors with high and medium-density insert arrangements. They are based on MIL-DTL-38999 Series I coupling interface lengths and Series
More informationAmphenol s 2M Micro38999 Connector Series The New Aerospace Standard
Tri-Start Threaded Coupling General Information Page Guide Order... C29 Weight... C30 Plugs... C31 In-Line... C32 Square Flange... C33 Jam Nut... C34 PCB Sq Flange... C35 PCBJam Nut... C36 PCB Double Flange.
More informationAllen Electric Connector Sales, Inc. (AECS, Inc.)
Allen Electric Connector Sales, Inc. (AECS, Inc.) A Woman owned small business since 1996, AECS, Inc. offers military circular electric connectors, connector accessories, custom design connectors, custom
More information8N45S NC Series Non-safety classified connectors for EPR reactors
Description Quick-connect ¼ turn bayonet coupling mechanism Straight backshell with sealing gland and cable clamp Integrated 60 ground termination mechanism compliant with EPR reactors wiring specifications
More informationDEUTSCH 9316 SERIES FOR MARINE AND OFFSHORE APPLICATIONS
DUTH 936 I FO MIN ND OFFHO ITION Harsh nvironment, Flameproof onnectors for ugged eliability and afety MIN OI ND G /// 936 I ONTNT Introduction/pecifications 3 ynopsis / ing ystem 4-5 ontact rrangements
More informationMIL-C 26482G Series II
pplications or all general purposes in military applications Standards MIL 2642 Series II QPL approved escription Standard version luminium alloy : olive green, nickel or, black, anodized plating ayonet
More informationPEGASUS SERIES. Amphenol Pcd. Amphenol Pcd
PEGASUS SERIES Amphenol Pcd Amphenol Pcd is one of the world s leading suppliers of interconnect products for Military, Commercial Aerospace and Industrial applications. Located north of Boston in Beverly,
More informationSeries 80 Mighty Mouse Technical Reference Complete Product Specification
Summary Performance Specifications Current Rating (Maximum): Size #23 Contact: 5 A., Size #20 contact: 7.5 A., Size #16 contact: 13 A., Size #12 contact: 23 A. Test Voltage (Dielectric Withstanding Voltage)
More informationFeatures and Application
ML-DTL-83723 Series Features and Application Bayonet and Threaded Coupling Features and Application ML-DTL-83723 Series family offers connectors with bayonet and threaded coupling including lanyard-release
More informationFeatures and Application
ML-DTL- Features and Application MS2426*/AE66* Features and Application ML-DTL- family offers connectors with bayonet coupling as well as threaded coupling. These connectors are intermateable with correspondingly
More informationHBB CONNECTOR SERIES. Engineering Superior Solutions. September 2015 Smiths Connectors. smithsconnectors.com
HBB CONNECTOR SERIES Engineering Superior Solutions September 2015 Smiths Connectors HBB CONNECTOR SERIES High Power, Quick Release Connectors 2 Table of Contents 4 PRODUCT OVERVIEW 9 COMPETITIVE ADVANTAGES
More informationITT Cannon KJL Series MIL-DTL Series I Connectors
APPLICATIONS FEATURES ITT Cannon KJL Series MIL-DTL-38999 Series I Connectors High performance military aircraft Commercial airlines Communications equipment Armored personnel carriers & tanks QUICK-MATING
More informationMIL-DTL-38999Series III Composite Series
MIL-DTL-38999Series III Composite Series 25 Connector part numbers Basic Series 8D 0-11 J 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 5: Plug with RFI shielding. Type: -: Connectors
More informationHERMETIC. Hermetic Connectors. High Performance Sealing Solutions
HERMETIC Hermetic Connectors High Performance Sealing Solutions Hermetic Connectors 38999 QPL Qualified Presentation Based on glass to metal seal technology, SOURIAU offers hermetic connectors to cover
More informationLuminus Series Amphenol Pcd
Luminus Series Amphenol Pcd Amphenol Pcd Pcd is is one one of of the the world s leading suppliers of of interconnect products for for Military, Commercial Aerospace and and Industrial applications. Located
More informationfor Quadrax and ELIO 8
1 - CHARACTERISTICS Mechanical Current ratings, continuous: Endurance: 500 matings Insertion and extraction forces, max: - shell size 1: 120 N (27 Ibs) - shell size 2: 267 N (60 Ibs) - shell size 3: 467
More informationMIL-C Circular Connectors
MIL-C-28840 Circular Connectors A high density, harsh environment connector designed to meet the most demanding environmental conditions and RFI/EMI shielding requirements. Delphi Connection Systems delivers
More informationπ network filter insertion loss - attenuation (db)
MI/RFI Applications All electronics equipments Standards oncerned equipments : F, V, MIL-ST 461, GAMG 13 Typical performance capacitive filter π network filter escription Filter connectors have been developed
More information45 YEARS OF EXPERIENCE
ENGINE CONNECTORS 45 YEARS OF EXPERIENCE High Performance Connectors for Critical Environment Temperature Up to 350ºC / 662ºF Vibrations Fire Corrosion 45 YEARS OF EXPERIENCE OLD PRODUCTS DBA 3x NEW GENERATION
More information8T Series. MIL-DTL Series II
Contents Overview 8T Series - Presentation... 06 8T Series - Applications... 06 A universal product platform... 07 Space saving... 08 ox solutions... 08 Shell types... 08 Features by shell types... 09
More informationSJT Series. Amphenol. Aerospace. Amphenol
eries TABE OF CONTENT - coop-proof Design of JT eries & tandard Mounting Dimensions of JT eries - Meet European pecification Applications Features, pecifications................... 98 How to Order, Rotations...............
More informationAmphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments
Amphenol GT eries Reverse Bayonet Coupling Connectors 12-024-7 Ruggedized Connector eries for Rail/ass Transit and other Harsh Environments Amphenol Table of Contents age o. Amphenol GT eries Reversed
More informationVG95234 Qualified Bayonet-Lock Connectors
Qualified Bayonet-Lock Crimp-Contact MIL-DTL-5015 Type Electrical for Ruggedized Power and Signal Applications United States United Kingdom Germany France Nordic Italy Spain Japan High Voltage Electrical
More informationSCE. Snatch Connector Electrical Series
SCE Snatch Connector Electrical Series SCE is a miniature product with a silent push to mate and pull to release design across two styles of cable receptacles. All inserts and contacts are moulded in place,
More informationWHEN YOU NEED THE BEST IN 5015 CONNECTORS
WHEN YOU NEED THE BET IN 5015 CONNECTO 702-802-2555 www.crownconnector.com TBE OF CONTENT 5015 Connectors...................................... 2 everse Bayonet Connectors.......................... 12
More information- - Introduction. Specifications
14 SERIES Introduction Amphenol 14 series connectors are water resistant, polarised, five and six contact electrical connectors for use in low voltage audio frequency circuits and applications. They employ
More informationAmphenol SCE2/Terrapin Series
APPLICATIONS TECHNICAL SPECIFICATIONS Amphenol SCE2/Terrapin Series Radios Headsets MATERIALS AND FINISHES Shell Material Shell Plating Contact Material Contact Plating MINIATURE PUSH-PULL CONNECTOR FOR
More informationDEUTSCH CTJ Series Common Termination System
DEUTSCH CTJ Series Common Termination System AS81714 Series II Qualified Products Offer Robust and Highly Reliable Wire Termination in Demanding Environments AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ
More informationMiniature Break Away Release Connector
8 Series reak way Miniature reak way Release onnector Space saving with scoop proof connector for harsh and EMI applications. compact solution iameter up to 45% smaller than 38999 9. Integrated backshell:
More informationAmphenol. ACA-B and GT Series Reverse Bayonet Coupling Connectors.
mphenol - and eries everse ayonet oupling onnectors www.amphenol-industrial.com mphenol 97 eries onnectors are U recognized and recognized. or further information on your individual application requirements,
More informationK2 Qualified Connectors for EPR Reactor
Reactor Class 1E connector with quick connect 1/4 turn bayonet coupling and shielding continuity designed to operate during normal & seismic conditions. K2 Qualified / RCC-E 2005 Compliant with EPR wiring
More informationMMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
More information8D Series D38999 Composite Series
Connector part numbers Basic Series 8D 0-11 J 35 P N L Shell style: 0: Square flange receptacle 5: Plug with RFI shielding Type: - : Connectors with standard crimp contacts. L: Receptacle with long PC
More information8LT SERIES. Aerospace & Military Bayonet Connectors. MIL-DTL Series I
8LT SERIES Aerospace & Military Bayonet Connectors Contents Overview 8LT Series Presentation... 06 8LT Series Applications... 06 A universal product platform... 07 Contact layouts... 08 Contact layouts
More informationFISCHER ULTIMATE TM SERIES RUGGED COMPACT LIGHTWEIGHT KEY FEATURES
H CHAPTER PAGES FISCHER TM SERIES RUGGED COMPACT LIGHTWEIGHT KEY FEATURES IP68 to -0m / IP69 / Hermetic 60 EMC shielding High corrosion resistance 0,000 mating cycles H - FISCHER TM SERIES Table of contents
More informationTopside / Shipboard Environmental Connectors
eacrow arine Bronze opside / hipboard I-B with solder cup or crimp contacts its-mb reverse-bayonet mil-c-5015 type / VG95234 EQUIVAEN arine Bronze eries I-B connectors are compliant with VG95234, using
More informationARINC 600 SERIES. Rack & Panel Rectangular Connectors. Selector Guide
ARIN 600 ERIE Rack & Panel Rectangular onnectors elector Guide ARIN 600 eries Overview Typical applications ockpit Display Units Mario Beauregard / Fotolia ourtesy of NORD-MIRO Picture All Rights Reserved
More informationAmphenol /Pyle MIL-C Connectors
Amphenol /Pyle MIL-C-26500 Connectors MS-101-2 Miniature Cylindrical Connectors for Military and Aerospace Applications Amphenol Table of Contents Amphenol /Pyle MIL-C-26500 Miniature Cylindrical Connectors
More informationMS4515 SPECIFICATIONS FEATURES APPLICATIONS
. SPECIFICATIONS PCB Mounted Pressure Transducers Pressure Ranges from 2 to 30 inches H 2O Amplified Ratiometric Analog Output Differential & Gage Temperature Compensated 3.3V or 5.0 V DC Supply Voltage
More informationAmphenol 97 Series MIL-DTL-5015
Amphenol 97 Series MIL-DTL-5015 MATES WITH ALL THREADED MIL-DTL-5015 CONNECTORS The 97 series is a durable, cost-effective MIL-DTL-5015 available in a variety of shell styles, sizes, contacts, and layouts.
More information8D Series D38999 Composite Series
Connector part numbers Basic Series 8D 0-11 J 35 P N L Shell style: 0: Square flange receptacle 5: Plug with RFI shielding Type: -: Connectors with standard crimp contacts. L: Receptacle with long PC tail
More informationNow Available in Black Zinc Nickel
847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances
More informationAmphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors
Amphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors 12-026-2 Crimped Rear Release Qualified for Environmental and Firewall Applications Amphenol This catalog covers the Amphenol /Matrix MIL-C-
More informationTable of Contents Introduction... 2 Amphenol MIL-DTL-5015 and MIL-5015 Type Standard Cylindrical Connectors General Information, Class
able of ontents age Introduction...................................... 2 mphenol I--5015 and I-5015 ype tandard ylindrical onnectors eneral Information, lass esignations............................. 3
More informationCTJ SERIES COMMON TERMINATION SYSTEM
DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM AS81714 Series II Qualified Products Offer Robust and Highly Reliable Wire Termination in Demanding Environments AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ
More information2M805 Tri-Start Threaded Coupling
2M805 Tri-Start Threaded Coupling General Information 2M Specs 2M801 2M803 2M804 2M805 Series Micro Miniature Connectors: s 2M805 Series of connectors offers the best EMI and Vibration performance among
More informationTermination Procedures for Triaxial Connectors D , D , and D
Page: 1 of 7 Termination Procedures for Triaxial Connectors D-621-0001, D-621-0002, and D-621-0003 1. Scope This standard covers the procedures for terminating triaxial and twinaxial cables to the triaxial
More informationAmphenol Amphenol PCD Shenzhen HVBI High Voltage with Inter-Lock
Amphenol Amphenol PCD Shenzhen HVBI High Voltage with Inter-Lock www.amphenolpcd.com.cn CONTENT HVBI PRODUCT INTRODUCTION............ 2 HOW TO ORDER: RECEPTACLE...... 3 alternate KEYING positions............
More informationAmphenol MIL-DTL-83723, Series III, Pyle
Amphenol MIL-DTL-83723, Series III, Pyle TALE OF CONTENTS MIL-DTL-83723, Series III, Pyle : Design Features, Customer Options, Manufacturer s Specifications. 363, 364 Quick Reference of Choices - Threaded
More informationMIL-DTL-83723, Series III, Pyle
TALE OF CONTENTS Table of Contents....................... 37 Design Features, Customer Options, Manufacturer s Specifications. 38, 39 Quick Reference of Choices - Threaded Styles......... 40-42 Quick Reference
More informationMS4525 SPECIFICATIONS
SPECIFICATIONS PCB Mounted Pressure Transducers Amplified Ratiometric Analog Output Differential, Gage, Absolute, Compound, & Vacuum Temperature Compensated 3.3 or 5.0 Vdc Supply Voltage The MS4525 is
More informationOur Most Important Connection is with You. SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229
SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229 Contents SMPM Introduction... 2-4 Interface... 2-5 Characteristics... 2-6 Plugs and Jacks... 2-7 Receptacles and panel shrouds... 2-8
More informationAmphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments
mphenol eries everse ayonet oupling onnectors 12-024-8 uggedized onnector eries for ail/ass ransit and other arsh nvironments mphenol able of ontents age o. mphenol eries eversed ayonet oupling onnectors
More informationDelphi Harsh Environment Series (HES) Connection Systems
The Delphi Harsh Environment Series (HES) include circular connectors, terminals, and a J1939 diagnostic circular connector. The 24 shell size industry standard connector includes six terminal configurations
More informationHow to Order CONTACT TYPE FLANGE TYPE MOUNTING CONTACT TERMINATION
hermetically sealed connectors are designed to meet environmental conditions of extreme pressure differential. These connectors are part of the ITT Cannon D Subminiature series and are qualified to MIL-C-24308
More informationModular Bayonet connectors: a flexible solution for data and signals transmission in railways harsh environment.
GM Modular Bayonet connectors: a flexible solution for data and signals transmission in railways harsh environment. Passenger control Networking and lighting control Diagnostic support for brakes, motors
More informationMIL-DTL Series 1 Solder Type PT
MIL-DTL-26482 Series 1 Solder Type PT The Amphenol Miniature Cylindrical Connector Series offers high density contact arrangements in a miniature, circular metal shell. This connector is environmentally
More informationRJF TV. Amphenol ROHS. Ethernet Connection System for Harsh Environment. Part Number Code RJF TV
RJF TV Ethernet Connection System for Harsh Environment ROHS compliant N & BZ RJFTV allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks in harsh environments.
More informationPT8420 Cable Actuated Sensor Industrial ma 0..20mA
PT8 Cable ctuated Sensor Industrial.. m..m bsolute Linear Position to 6 inches (5 mm) luminum or Stainless Steel Enclosure Options VLS Option to Prevent Free-Release Damage IP68 / NEM 6 Hazardous rea Certification
More informationSUPPLEMENTAL INFORMATION SHEET QPL SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST
ULEMENTAL INFORMATION HEET QL 81703 QUALIFICATION HAVE BEEN VALIDATED (Frequency: 3 Years) BY VERIFICATION TETING QL-81703-5 16 June 2015 ULEMENTAL INFORMATION HEET FOR QUALIFIED RODUCT LIT OF RODUCT QUALIFIED
More information8D Series D38999 Stainless Steel Series
Connector part numbers Basic Series 8D 0-11 K 35 P N L Locking type: None: Receptacle or plug with standard locking V: Plug with reinforced locking Shell style: 0: Square flange receptacle 7: Jam nut receptacle
More information