MIL-DTL-83723, Series III, Pyle

Transcription

1 TALE OF CONTENTS Table of Contents Design Features, Customer Options, Manufacturer s Specifications. 38, 39 Quick Reference of Choices - Threaded Styles Quick Reference of Choices - ayonet Styles Quick Reference of Choices - Hermetic Receptacles, Threaded.. 44, 45 Insert Availability, Alternate Keying Positions Insert Arrangement Drawings , 48 How to Order - Military or Commercial How to Order - Pyle Commercial Designed to Meet GE Specifications.. 50 How to Order - oeing (ACC63CM/CN) or Pyle Comm. Equivalent... 5 How to Order - ASD Designation How to Order - Pyle Commercial Equivalents to ASD Designations/ European Standards How to Order - ESC0/ for SAC and Rolls Royce Standards How to Order - Pyle Commercial Equivalent to ESC/ European Specifications - Scoop-Proof only How to Order - Hermetic, Military or Commercial Threaded Styles: Square Flange Receptacle Jam Nut (D-Hole Mount) Receptacle Straight Plug & Non-Decoupling Plug ayonet Styles: Square Flange Receptacle Jam Nut (D-Hole Mount) Receptacle Straight Plug Hermetic Styles: Square Flange Receptacle Jam Nut (D-Hole Mount) Receptacle Solder Mount/Weld Mount Receptacle , Sealing Plugs, Tools MIL-DTL Series III, Pyle Typical Markets: Military & Commercial Aviation - High Temperature Applications Military Vehicles for more information at

2 Threaded or ayonet, High Temp. Stainless Steel Options High Speed EMI Filter Printed III Transient Circuit oard Pyle Crimp Rear Release Matrix Matrix Pyle Matrix 2 SJT I II III offers the Pyle Product line of MIL-DTL-83723*, Series III Connectors. Accessory Orientation Teeth (Optional 360 also available) Full Mating Indicator Threaded Coupling Static Dynamic O Ring Seal Closed Entry Socket RFI Grounding Spring (Optional) /Pyle Series III high temperature styles are capable of operation at 260 C/500 F. A 00% scoop-proof version of the high temperature connector is also available under specification ESC/Pyle HTK Series. In addition, this connector series incorporates a unique sealing grommet that is capable of sealing on standard diameter wire as well as Kapton wire of reduced diameter. The Pyle family provides connectors in environmental, firewall and hermetic classes that exceed the most stringent specification requirements. THREADED STYLE CONNECTORS Stainless steel shells** provide corrosion resistance Metal to metal bottoming Unique sealing grommet accepts a wide range of wire diameters Patented non-decoupling device in plugs - a self-locking clutch plate that provides greater resistance to decoupling than coupling during vibration AYONET STYLE CONNECTORS Same quality features of the threaded style, but with 3 point bayonet coupling - quick turn to lock, visual confirmation of complete coupling HIGH TEMPERATURE STYLE CONNECTORS High temperature connector materials and contacts provide operation to 200 C and Firewall capability to 260 C Improved metal to metal bottoming design Unique sealing grommet accepts a wide range of wire diameters Improved 360 accessory orientation teeth provide greater performance under vibration Patented non-decoupling device (torque differential) Improved shell to shell conductivity with optional RFI grounding fingers Styles available that meet several European specifications, General Electric and Rolls Royce specifications HERMETIC STYLE CONNECTORS Knurled Coupling Nut Grip Aid lue Rear Release Indicator Design Features (Threaded Style Shown) SERVICE RATINGS Service Rating MIL-DTL-83723, Series III Connectors are Available in a Wide Variety of Styles: Recommended Operating AC Voltage at Sea Level Hermetic styles are available in threaded receptacles with solderwell or flat eyelet termination Designed for environmental moisture sealing with fused compression glass sealed inserts High temperature hermetics 200 C and 260 C Firewall The MIL-DTL Series III family of connectors includes styles from Pyle National. These have proven technology for severe environments and are widely used in commercial and military aerospace markets. /Pyle connectors incorporate many advantageous features, such as a unique threaded coupling mechanism that provides greater resistance to decoupling. This coupling mechanism eliminates the need for safety wiring and tends to couple during vibration - thus offering the user added assurance and a margin of safety. Test Voltage AC (RMS), 60 cps Sea Level 50,000 ft. 70,000 ft. 0,000 ft. I 600, Please note that the electrical data given is not an establishment of electrical safety factors. This is left entirely in the designer s hands as he can best determine which peak voltage, switching surges, transients, etc. can be expected in a partic ular circuit. * MIL-DTL supercedes MIL-C ** The Pyle family is offered in stainless steel shell classes. See the Matrix family for aluminum shell classes, in the preceding section of this catalog. 38 for more information at

3 Manufacturer s Specifications The /Pyle Product line of MIL-DTL-83723*, Series III Connectors was developed for the higher operating temperatures inherent in today s high performance aircraft and aircraft engines. These connectors meet the performance requirements of the following manufacturer s specifications: oeing ACC63CM/CN* Firewall European: ASD EN2997 General Electric: M50TF3564 Rolls Royce/SAC: ESC0 and ESC Operating Temperature Data Altitude Voltage reakdown Rating Rating Retention Strength Connector Durability MIL-DTL-83723, SERIES III CONNECTOR PERFORMANCE CHARACTERISTICS Std: 85 F ( 65 C) to 392 F (200 C) Class K types meet fireproof test per MIL-DTL F (093 C) High Temperature Series: Operates at 500 F (260 C) Sea Level to 0,000 feet Service Rating I Sea Level...,500 50,000 ft ,000 ft ,000 ft contacts amperes max. 6 contacts amperes max. 2 contacts amperes max. Exceeds MIL-DTL requirements 500 cycles per MIL-DTL for threaded coupling; 500 cycles per General Electric M50TF232 for non-decoupling styles To 98% relative humidity, including condensation Freezing rain Humidity Exposure Non-Decoupling Exceeds requirements of MIL-DTL-83723/95 and 96. Vibration Thermal Shock Physical Shock (Mated) Moisture Resistance (Mated) Insulation Resistance, High Temp. (Mated) Corrosion (Unmated) Temperature Life Air Leakage (Unmated) Altitude Immersion (Mated) High Potential Voltage Altitude (Unmated) ESC Engine Connector Meets MIL-DTL of 4.7G s for 6 hours.; oeing ACC63CM/CN for 36 hours General Electric vibration spec. M50TF232 and M50TF2238 for 36 hours, which includes: Temp. Extremes G Level Time Length Room Temp G s... 2 hrs. (4 hrs. each axis) 65 F ±5 F G s... 2 hrs. (4 hrs. each axis) 350 F ±5 F G s...2 hrs. (4 hrs. each axis) HERMETIC CONNECTOR PERFORMANCE CHARACTERISTICS No damage detrimental to the operation of the connector occurs when subjected to 0 cycles of thermal shock from 0 C to 90 C and back to 0 C. 300 G s 500 Megohms 500 Megohms Complies with MIL-DTL Req. Fully functional for 000 hours at 200 C (392 F) ambient. Internal temperature 238 C (460 F). Less than.0 micron per cubic feet per hour on application of 5 PDS pressure differential across the connector. After 3 cycles immersed in salt water with pressure reduced to in. Hg (75,000 ft. altitude) for 30 minutes and returned to atmosphere pressure. While connectors submerged insulation resistance should remain 000 megohms minimum and support 500 volts RMS applied without flash-over or breakdown. When tested in accordance with MIL-STD-202, Method 30, no flash-over or breakdown under simulated altitude conditions as shown: Altitude/Service Rating I 50, AC-RMS 70, AC-RMS 0, AC-RMS III II I SJT III 505 Matrix 2 Matrix Pyle Crimp Rear Release Matrix Pyle Printed Circuit oard EMI Filter Transient High Speed Options * ACC63CM supersedes ACC63R and ACC63CN supersedes ACC63T. ASD supersedes AECMA for more information at

4 Sq. Flange Receptacle, Threaded - Quick Reference Options High Speed EMI Filter Printed III Transient Circuit oard Pyle Crimp Rear Release Matrix Matrix Pyle Matrix 2 SJT I II III MIL-DTL-83723, SERIES III SQUARE FLANGE RECEPTACLE, THREADED COUPLING M83723/82 with Sockets, Classes G, K M83723/83 with Pins, Classes G, K Commercial: T( )-7 With O ring seal, Classes G, K Comm. Special for General Electric: J-7 With Static Dynamic Seal, Stainless Steel, but not avail. in Firewall J8-7 Same as J-7 except with Scoop-proof recessed pins N-7 Same as J-7 except Electro-deposited Nickel ase N8-7 Same as N-7 except with Scoop-proof recessed pins NK-7 Same as N except Stainless Steel Firewall Special with oeing Designation: ACC63CN** With O ring seal, Stainless Steel Firewall, with oeing approved contacts, modifications with 360 teeth per MS355 Comm. Special per oeing Co. Spec.: SK-7 Stainless Steel Firewall with O ring seal, qualified to oeing, Y26 Variation - with oeing approved contacts Commercial ASD Designation: EN2997 ( )0 Meets ASD specifications 200 C temp. (Classes K, S, Y), 260 C high temp. (Classes KE, SE, YE) Comm.- Meet Several European Stds: T( )-7 With O ring seal, Classes G, K Variations for Euro market specifications J( )-7 With Static Dynamic Seal, Classes G, K Variations for Euro market specifications ** ACC63CN supersedes ACC63T. See how to order pages for complete part numbers. ayonet style square flange receptacles are shown on page 60. Square Flange Receptacle Threaded SERVICE CLASSES* MILITARY AND COMMERCIAL G Stainless steel, 200 C Stainless steel, 200 C Firewall K capability Stainless steel, 200 C Firewall capability, Grounding Spring S Stainless steel, 200 C, Hermetic with P Eyelet contacts Stainless Steel, 200 C, Hermetic with Y Solderwell contacts Stainless Steel, High Temp. (260 C) KE Firewall capability Stainless steel, High Temp. (260 C) SE Firewall capability, Grounding Spring Stainless Steel, High Temp. (260 C) YE Firewall capability, Hermetic with solderwell contacts * For Classes A, R and W (aluminum shell types) - supplies these in their Matrix family. See the preceding section of this catalog, III Matrix. Commercial - Meet Society of ritish Co./Rolls Royce Standards: ESC0 ( )0 260 C Firewall (Classes KE, SE, YE), 360 accessory teeth per MS355 ESC ( )0 260 C Firewall (Classes KE, SE, YE), Scoop-proof recessed pins, 360 accessory teeth per MS355 ESC with Scoop-Proof (Recessed pins): Square Flange Receptacle, Threaded, per European Stds. (Green Insert - High Temp 260 C; lue insert C) ESC0 & ESC also available in Hermetic square flange receptacles - See Hermetic quick ref. page XX. HTK-7 Standard ESC, Class K Firewall, Scoop-proof, Variations for Euro market specifications HNK-7 Nickel finish, Class K Firewall Mating recept. has O ring seal, Scoop-proof, Variations for Euro market specs HSK-7 Same as HTK, except this is a special designator for oeing Co. 40 for more information at

5 Jam Nut Receptacle, Threaded - Quick Reference MIL-DTL-83723, SERIES III JAM NUT (D-HOLE MOUNT) RECEPTACLE, THREADED COUPLING M83723/84 with Sockets, Classes G, K M83723/85 with Pins, Classes G, K Commercial: T( )-9 With O ring seal, Classes G, K Comm. Special for General Electric: J-9 With Static Dynamic Seal, Stainless Steel, but not avail. in Firewall J8-9 Same as J-7 except with Scoop-proof recessed pins N-9 Same as J-7 except Electro-deposited Nickel ase N8-9 Same as N-7 except with Scoop-proof recessed pins NK-9 Same as N except Stainless Steel Firewall Commercial ASD Designation: EN2997 ( )7 Meets ASD specifications 200 C temp. (Classes K, S, Y), 260 C high temp. (Classes KE, SE, YE) NFL 5443 ( )7 Comm.- Meet Several European Stds: T( )-9 With O ring seal, Classes G, K Variations for Euro market specifications J( )-9 With Static Dynamic Seal, Classes G, K Variations for Euro market specifications Commercial - Meet Society of ritish Co./Rolls Royce Standards: ESC0 & ESC jam nut receptacles are available in Hermetic only - See Hermetic quick ref. page 45 Jam Nut (D-Hole Mount) Receptacle, Threaded SERVICE CLASSES* MILITARY AND COMMERCIAL G Stainless steel, 200 C Stainless steel, 200 C Firewall K capability Stainless steel, 200 C Firewall capability, Grounding Spring S Stainless steel, 200 C, Hermetic with P Eyelet contacts Stainless Steel, 200 C, Hermetic with Y Solderwell contacts Stainless Steel, High Temp. (260 C) KE Firewall capability Stainless steel, High Temp. (260 C) SE Firewall capability, Grounding Spring Stainless Steel, High Temp. (260 C) YE Firewall capability, Hermetic with solderwell contacts * For Classes A, R and W (aluminum shell types) - supplies these in their Matrix family. See the preceding section of this catalog, III Matrix III II I SJT III 505 Matrix 2 Matrix Pyle Crimp Rear Release Matrix Pyle Printed Circuit oard EMI Filter Transient High Speed Options No oeing Designated Jam nut receptacle. See how to order pages for complete part numbers. ayonet style jam nut receptacles are shown on page 6. for more information at

6 Plugs, Threaded - Quick Reference Options High Speed EMI Filter Printed III Transient Circuit oard Pyle Crimp Rear Release Matrix Matrix Pyle Matrix 2 SJT I II III MIL-DTL-83723, SERIES III STANDARD STRAIGHT PLUG, THREADED COUPLING M83723/86 with Sockets, Classes G, K M83723/87 with Pins, Classes G, K Commercial: T( ) Mating recept. has O ring seal, Classes G, K Comm. Special for General Electric: J- With Static Dynamic Seal, Stainless Steel, but not avail. in Firewall J8- Same as J-7 except with Scoop-proof recessed pins N- Same as J-7 except Electro-deposited Nickel ase N8- Same as N-7 except with Scoop-proof recessed pins NK- Same as N except Stainless Steel Firewall No oeing straight plug designations. No ASD or other European/ESC0 or ESC straight plug designations. See page 62 for ayonet style straight plug style. Standard Straight Plug, Threaded MIL-DTL-83723, SERIES III NON-DECOUPLING PLUG (UNIQUE SELF-LOCKING CLUTCH PLATE), THREADED COUPLING M83723/95 with Sockets, Classes G, K M83723/96 with Pins, Classes G, K M83723/97 with EMI Grounding spring, with Pins M83723/97 with EMI Grounding spring, with Sockets Commercial: T( )2 Mating recept. has O ring seal, Classes G, K Comm. Special for General Electric: J-2 With Static Dynamic Seal, Stainless Steel, but not avail. in Firewall J8-2 Same as J-7 except with Scoop-proof recessed pins N-2 Same as J-7 except Electro-deposited Nickel ase N8-2 Same as N-7 except with Scoop-proof recessed pins NK-2 Same as N except Stainless Steel Firewall Special with oeing Designation: ACC63CM** Mating recept. has O ring seal, Stainless Steel Firewall, with oeing approved contacts, modifications with 360 teeth per MS355 Comm. Special per oeing Co. Spec.: SK-2 Stainless Steel Firewall qual. to oeing, Y26 Variation - with oeing approved contacts ** ACC63CM supersedes ACC63R. See how to order pages for complete part numbers. No ayonet style Non-Decoupling plug available. SERVICE CLASSES* MILITARY AND COMMERCIAL G Stainless steel, 200 C Stainless steel, 200 C Firewall K capability Stainless steel, 200 C Firewall capability, Grounding Spring S Stainless Steel, High Temp. (260 C) KE Firewall capability Stainless steel, High Temp. (260 C) SE Firewall capability, Grounding Spring * For Classes A, R and W (aluminum shell types) - supplies these in their Matrix family. See the preceding section of this catalog, III Matrix. Non-Decoupling Plug, Threaded Left - Green Insert - High Temp 260 C and 360 Accessory Teeth; Right - lue insert C and 3 Accessory Teeth Commercial ASD Designation: EN2997 ( )6 Meets ASD specifications 200 C temp. (Classes K, S), 260 C high temp. (Classes KE, SE) Comm.- Meet Several European Stds: T( )-2 Mating recept. has O ring seal, Classes G, K Variations for Euro market specifications J( )-2 With Static Dynamic Seal, Classes G, K Variations for Euro market specifications Commercial - Meet Society of ritish Co./Rolls Royce Standards: ESC0 ( )6 260 C Firewall (Classes KE, SE), 360 accessory teeth per MS355 ESC ( )6 260 C Firewall (Classes KE, SE), Scoop-proof, 360 accessory teeth per MS355 ESC with Scoop-Proof (Recessed pins): HTK-2 Standard ESC, Class K Firewall, Scoop-proof, Variations for Euro market specs HNK-2 Nickel finish, Class K Firewall Mating recept. has Static Dynamic seal, Scoop-proof, Variations for Euro market specs HSK-2 Same as HTK, except this is a special designator for oeing Co. 42 for more information at

7 ayonet Plugs & Receptacles - Quick Reference MIL-DTL-83723, SERIES III SQUARE FLANGE RECEPTACLE, AYONET COUPLING M83723/7 with Sockets, Classes G, K M83723/72 with Pins, Classes G, K Commercial: Y( )7 With O ring seal, Classes G, K MIL-DTL-83723, SERIES III JAM NUT (D-HOLE MOUNT) RECEPTACLE, AYONET COUPLING M83723/73 with Sockets, Classes G, K M83723/74 with Pins, Classes G, K Commercial: Y( )9 With O ring seal, Classes G, K MIL-DTL-83723, SERIES III STRAIGHT PLUG, AYONET COUPLING M83723/75 with Sockets, Classes G, K M83723/76 with Pins, Classes G, K Commercial: Y( )0 With O ring seal, Classes G, K ayonet coupling connectors are offered in Military and Commercial equivalent designations. See how to order page 49. They are not included in oeing, GE, ASD and other European specified connectors. size 28 is not available in ayonet coupling connectors. Square Flange Receptacle with ayonet Coupling Jam Nut (D-Hole Mount) Receptacle with ayonet Coupling Straight Plug with ayonet Coupling SERVICE CLASSES* MILITARY AND COMMERCIAL G Stainless steel, 200 C Stainless steel, 200 C Firewall K capability * For Classes A, R and W (aluminum shell types) - supplies these in their Matrix family. See the preceding section of this catalog, III Matrix III II I SJT III 505 Matrix 2 Matrix Pyle Crimp Rear Release Matrix Pyle Printed Circuit oard EMI Filter Transient High Speed Options for more information at

8 Hermetic Receptacles - Quick Reference Options High Speed EMI Filter Printed III Transient Circuit oard Pyle Crimp Rear Release Matrix Matrix Pyle Matrix 2 SJT I II III MIL-DTL-83723, SERIES III HERMETIC SQUARE FLANGE RECEPTACLE, THREADED COUPLING Commercial: M83723/88Y Stainless Steel, Class Y, Solderwell contacts M83723/88P Stainless Steel, Class P, Eyelet contacts TY-7 Stainless Steel, O ring Seal, Solderwell or Eyelet contacts, 200 C or 260 C FY-7 Stainless Steel, Static Dynamic Seal, Solderwell or Eyelet contacts, 200 C or 260 C NY-7 Stainless Steel, Static Dynamic Seal, Electro-deposited Nickel, Solderwell or Eyelet contacts, 200 C or 260 C Commercial ASD Designation: EN2997Y0 / YE0 Meets ASD Specifications, Stainless Steel, Class Y (200 C) / Class YE (260 C), Solderwell contacts Commercial - Meet Society of ritish Co./Rolls Royce Standards: ESC0YE2 260 C Firewall, Stainless Steel, Class YE, Solderwell contacts ESCYE2 260 C Firewall, Stainless Steel, Class YE, Solderwell contacts, Scoop-proof Recessed pins MIL-DTL-83723, SERIES III HERMETIC JAM NUT RECEPTACLE, THREADED COUPLING Commercial: Hermetic Square Flange Receptacle, Threaded M83723/89Y Stainless Steel, Class Y, Solderwell contacts M83723/89P Stainless Steel, Class Y, Eyelet contacts TY-9 Stainless Steel, O ring Seal, Solderwell or Eyelet contacts, 200 C or 260 C FY-9 Stainless Steel, Static Dynamic Seal, Solderwell or Eyelet contacts, 200 C or 260 C NY-9 Stainless Steel, Static Dynamic Seal, Electro-deposited Nickel, Solderwell or Eyelet contacts, 200 C or 260 C Commercial ASD Designation: EN2997Y7 / YE7 Meets ASD Specifications, Stainless Steel, Class Y (200 C) / Class YE (260 C), Solderwell contacts Commercial - Meet Society of ritish Co./Rolls Royce Standards: ESC0YE3 260 C Firewall, Stainless Steel, Class YE, Solderwell contacts ESCYE3 260 C Firewall, Stainless Steel, Class YE, Solderwell contacts, Scoop-proof Recessed pins Y P YE SERVICE CLASSES HERMETIC MILITARY AND COMMERCIAL Stainless Steel, 200 C, Hermetic with solderwell contacts Stainless steel, 200 C, Hermetic with eyelet contacts Stainless Steel, High Temp. (260 C) Firewall capability, Hermetic with solderwell contacts Hermetic Jam Nut Receptacle, Threaded Commercial TY, FY and NY meet European specifications and General Electric spec. GEM50TF3564, Classes A &. sizes 20, 24 and 28, consult for availability. Hermetic style receptacles are not included in oeing designations. 44 for more information at

9 Hermetic Receptacles, cont. - Quick Reference MIL-DTL-83723, SERIES III HERMETIC SOLDER MOUNT/WELD MOUNT RECEPTACLE, THREADED COUPLING Commercial: M83723/90Y Stainless Steel, Class Y, Solderwell contacts M83723/90P Stainless Steel, Class P, Eyelet contacts TY-4 Stainless Steel, O ring Seal, Solderwell or Eyelet contacts, 200 C or 260 C FY-4 Stainless Steel, Static Dynamic Seal, Solderwell or Eyelet contacts, 200 C or 260 C NY-4 Stainless Steel, Static Dynamic Seal, Electro-deposited Nickel, Solderwell or Eyelet contacts, 200 C or 260 C Hermetic Solder Mount/Weld Mount Receptacle, Threaded Commercial ASD Designation: EN2997Y / YE Meets ASD Specifications, Stainless Steel, Class Y (200 C) / Class YE (260 C), Solderwell contacts Commercial - Meet Society of ritish Co./Rolls Royce Standards: ESC0YE 260 C Firewall, Stainless Steel, Class YE, Solderwell contacts ESCYE 260 C Firewall, Stainless Steel, Class YE, Solderwell contacts, Scoop-proof Recessed pins Y P YE SERVICE CLASSES HERMETIC MILITARY AND COMMERCIAL Stainless Steel, 200 C, Hermetic with solderwell contacts Stainless steel, 200 C, Hermetic with eyelet contacts Stainless Steel, High Temp. (260 C) Firewall capability, Hermetic with solderwell contacts Commercial TY, FY and NY meet European specifications and General Electric spec. GEM50TF3564, Classes A &. sizes 20, 24 and 28, consult for availability. Hermetic style receptacles are not included in oeing designations III II I SJT III 505 Matrix 2 Matrix Pyle Crimp Rear Release Matrix Pyle Printed Circuit oard EMI Filter Transient High Speed Options for more information at

10 Options High Speed EMI Filter Printed III Transient Circuit oard Pyle Crimp Rear Release Matrix Matrix Pyle Matrix 2 SJT I II III / Insert Arrangement INSERT ARRANGEMENTS Service Rating Total Insert Availability and Identification, Alternate Keying Positions I I ** I I I I *** I I *** I *** I I I *** I I I *** I I *** I I ** I I I ** I *** I I ** I ** I I F I *** I ** I FF I 46 2 Twinax I I I *** I * I 9 9 Not an MS layout. * Special - consult for availability. To avoid cross-plugging problems in applications requiring the use of more than one connector of the same size and arrange ment, alternate keying positions are available as indicated in the chart below. The diagram shows the engaging view of a receptacle shell with keyways. The insert is rotated counter-clockwise relative to the center-line. Plug shells would be the opposite of this diagram. In the Normal insert position (position N), the insert center line coincides with the center-line of the master key/ keyway of the shell. In the alternate keying positions (positions 6, 7, 8, 9 and Y), the minor keys/keyways are positioned with reference to mas ter key/keyway as indicated in the keying position table. ALTERNATE KEYING POSITIONS OF SHELL Polarizing Position Key/Keyway Positions A C D 8 thru 24 N & 0 ALTERNATE KEYING POSITIONS (Rotation of key/keyway of shell) only Y , 4, 6, , 20, 22, and Y thru 24 ** Special Pyle with Matrix insert (ESC0 type, EN2997 Spec); consult for availability. *** oeing Qualified Arrangements (See oeing How to Order page 5) F 24-9 is a special ground plane insert with purchased size 2 Coax contacts; consult for information. FF is a special insert that accommodates size 8 twinax contacts with ground spring. 8 and 2 cavities can accommodate Twinax or Coax contacts; consult for information. s 20, 24 and 28 Hermetic; consult for availability. 28 not available in ayonet style. A Keying Positions C Master Polarizing Keyway Shown is Engaging Face View of Receptacle with Keyways (Plug Keys would be Opposite) ESC (HTK SERIES) ONLY Polarizing Key/Keyway Positions Position A C D N Position Y supersedes inactive positions 0 and Z designations. Ref. MIL-STD-554. For ordering information on accessories, such as protection caps and backshell hardware, contact, Sidney, NY. D 46 for more information at

11 Insert Arrangements front face of pin insert or rear face of socket insert illustrated Insert Arrangement ** *** 2-2 Service Rating I I I I I I I I Number of Insert Arrangement 4-04*** 4-07*** *** 6-24 Service Rating I I I I I I Number of III II I SJT III 505 Matrix 2 Matrix Pyle Crimp Rear Release Matrix Pyle Insert Arrangement *** *** Service Rating I I I I I Number of Printed Circuit oard EMI Filter Transient 39 Insert Arrangement 20-28** ** 22-9*** Service Rating I I I I I Number of High Speed Not an MS layout. * Special - consult for availability. ** Special Pyle with Matrix insert (ESC0 type, EN2997 Spec); consult for availability. *** oeing Qualified Arrangements (See oeing How to Order page 5) 8 and 2 cavities can accommodate Twinax or Coax contacts; consult for information. s 20, 24 and 28 Hermetic; consult for availability. 28 not available in ayonet style. CONTACT LEGEND Options for more information at

12 Insert Arrangements Options High Speed EMI Filter Printed III Transient Circuit oard Pyle Crimp Rear Release Matrix Matrix Pyle Matrix 2 SJT I II III front face of pin insert or rear face of socket insert illustrated Insert Arrangement ** 22-39** F Service Rating I I I I I Number of Insert Arrangement *** 24-43** FF Service Rating I I I I I Number of Twinax Insert Arrangement *** 28-9 * Service Rating I I I Number of Not an MS layout. * Special - consult for availability. ** Special Pyle with Matrix insert (ESC0 type, EN2997 Spec); consult for availability. *** oeing Qualified Arrangements (See oeing How to Order page 5) F 24-9 is a special ground plane insert with purchased size 2 Coax contacts; consult for information. FF is a special insert that accommodates size 8 twinax contacts with ground spring. 8 and 2 cavities can accommodate Twinax or Coax contacts; consult for information. s 20, 24 and 28 Hermetic; consult for availability. 28 not available in ayonet style. CONTACT LEGEND for more information at

13 How to Order Military or Commercial Designation Connector Style and Type (Crimp) MIL-DTL-83723, Connector Service Series III Type Class MILITARY M83723 /82 G M83723 Step. Military Connector Type MIL-DTL Series III Connectors Step 2. Select a Connector Style /7 ayonet, Square Flange Receptacle, with sockets /72 ayonet, Square Flange Receptacle, with pins /73 ayonet, Jam Nut (D-Hole Mount) Recept., with sockets /74 ayonet, Jam Nut (D-Hole Mount) Recept., with pins /75 ayonet, Straight Plug, with sockets /76 ayonet, Straight Plug, with pins /82 Threaded, Square Flange Receptacle, with sockets /83 Threaded, Square Flange Receptacle, with pins /84 Threaded, Jam Nut (D-Hole Mount) Recept., with sockets /85 Threaded, Jam Nut (D-Hole Mount) Recept., with pins /86 Threaded, Straight Plug, with sockets /87 Threaded, Straight Plug, with pins /95 Threaded, Non-Decoupling Plug, with sockets /96 Threaded, Non-Decoupling Plug, with pins /97 /98 Threaded, Non-Decoupling Plug, with EMI Grounding spring, with sockets Threaded, Non-Decoupling Plug, with EMI Grounding spring, with pins Step 3. Select a Service Class G Stainless Steel K Stainless Steel Firewall Note: See Matrix styles for aluminum classes A, R and W. Step 4. Select a & Insert Arrangement from chart on pg. 46. (except size 28 is not available in ayonet Style) & Insert Arrangements are on page 46. First number represents, second number is the Insert Arrangement Step 5. Select an Alternate Keying Position - Rotation of master key/keyway of shell. Use N for normal. Use 6, 7, 8, 9 or Y for alternate keying positions. See page 46 for descriptions. / Insert Arrangement Alternate Keying Position of Pyle MIL-DTL-83723, Series III Connector Style Service Class Style / Insert Arrangement Type Alternate Finish or Without Alternate Keying Position of Variations COMMERCIAL T G S D 06 XXX (Refer to military specification slash sheet number). (How to Order Hermetic Styles is provided on page 56). Step. Select a Commercial Connector Style Designed to be Equivalent to M83723, Series III T Y Threaded with O ring seal in receptacle ayonet with O ring seal in receptacle (How to Order Hermetic Styles is provided on page 56). Step 2. Select a Service Class G K Step 4. Select a & Insert Arrangement from chart on pg. 46. (except size 28 is not available in ayonet Style) & Insert Arrangements are on page 46. First number represents, second number is the Insert Arrangement. Step 5. Select a Type (Crimp) P S Stainless steel Stainless steel Firewall Note: See Matrix styles for aluminum classes A, R and W. Step 3. Select a Style -0 Straight Plug, ayonet coupling only - Straight Plug, Threaded coupling only -2 Non-Decoupling Plug, Threaded coupling only -7 Square Flange Receptacle -9 Jam Nut (D-Hole Mount) Receptacle Pin Socket Step 6. Alternate Finish or without D E Gold per SAE AS39029* Without contacts Step 7. Select an Alternate Keying Position - Rotation of master key/keyway of shell. Use N for normal. Use 06, 07, 08, 09 or Y for alternate keying positions. See page 46 for descriptions. Step 8. Variations Consult, Sidney, NY for information. *supersedes MIL-C for more information at III II I SJT III 505 Matrix 2 Matrix Pyle Crimp Rear Release Matrix Pyle Printed Circuit oard EMI Filter Transient High Speed Options 49

14 Options High Speed EMI Filter Printed III Transient Circuit oard Pyle Crimp Rear Release Matrix Matrix Pyle Matrix 2 SJT I II III Pyle MIL-DTL-83723, Series III PYLE COMMERCIAL DESIGNED TO MEET G. E. SPECIFICATIONS J J8 N N8 NK Step. Select a Commercial Connector Type Designed to Meet General Electric Specifications Threaded, Stainless Steel, Static/Dynamic Seal in receptacle Same as J except with Scoop-Proof Recessed pins Same as J except Electro-deposited Nickel Plated Same as N except with Scoop-Proof Recessed pins Same as N except Stainless Steel Firewall Step 4. Select a & Insert Arrangement from chart on pg. 46. & Insert Arrangements are on page 46. First number represents, second number is the Insert Arrangement. How to Order Pyle Commercial - Designed to Meet General Electric Specifications Connector Type Step 2. Select a Style -0 ayonet Plug - Threaded Straight Plug -2 Threaded Non-Decoupling Plug -7 Square Flange Receptacle Style -9 Jam Nut (D-Hole Mount) Receptacle Step 3. Select a Modification E F G Modification (Accessory Teeth) / Insert Arrangement Step 5. Select a Type (Crimp) P K S L Type Alternate Finish or Without Pin #20 Pins with #8 crimpwell Socket #20 Sockets with #8 crimpwell Alternate Keying Position of Step 7. Select an Alternate Keying Position - Rotation of master key/keyway of shell. Use N for normal. Use 06, 07, 08, 09 or Y for alternate keying positions. See page 46 for descriptions. Step 8. Variations (Primarily Designed for General Electric) Variations J -7 E 6-24 S D 06 XXXX 360 Accessory Teeth per MS355 Plug and Receptacle 360 Accessory Teeth per MS355, EMI Grounding Spring on Plug only 3 Accessory Teeth, EMI Grounding Spring on Plug only Step 6. Alternate Finish or without D E Y76 Y85 Y86 Y88 Gold per SAE AS39029* Without contacts 260 C per G.E. M50TF3564, Class, No Accessory Teeth Older style with 200 C Capability - European market (Superseded by Y63) 260 C Capability per G. E. M50TF3564 Class ** 200 C Capability per G. E. M50TF3564 Class A** Another variation available with molding groove for potting - consult for ordering information. * supersedes MIL-C ** Also see Hermetic styles that meet G.E. specification M50TF3564, Classes A & on page for more information at

15 How to Order oeing Designation (ACC63CM/CN*) or Pyle Commercial Equivalent MIL-DTL-83723, Series III OEING CO. DESIGNATION Connector Type Style oeing Spec. Qualified Step. oeing Co. Designation Modification (Accessory Teeth) oeing Spec. Qualified Insert Arrangement Style Alternate Keying Position of With Option ACC63 CM 8 4 P 8 A ACC63 MIL-DTL Series III oeing Designation ACC63CM/CN** Firewall SK Threaded with O ring seal in receptacle Connectors (Refer to military specification slash sheet number.) Step 2. Select a Style ** ACC63CM/CN supersedes ACC63R/T -2 Threaded, Non-Decoupling Plug Stainless Steel Firewall Step 2. Select a Connector Type Threaded, Square Flange Receptacle, Stainless Steel -7 Firewall CM Threaded, Non-Decoupling Plug Stainless Steel Firewall Step 3. Select a Modification CN Pyle MIL-DTL-83723, Series III PYLE COMMERCIAL EQUIV. TO OEING ACC63CM/CN Connector Type Threaded, Square Flange Receptacle, Stainless Steel Firewall Step 5. Select a oeing Specification Qualified Insert Arrangement 2-03, 4-04, 4-07, 6-0, 8-4, 20-6, 22-9, 24-30, (these incorporate oeing approved contacts) Step 6. Select a Type (Crimp) Step 7. Select an Alternate Keying Position - Rotation of master key/keyway of shell. Use N for normal. Use 6, 7, 8, 9 or Y for alternate keying positions. See page 46 for descriptions Style Modification (Accessory Teeth) Step 3. Select a oeing Specification Qualified 2, 4, 6, 8, 20, 22, 24, 28 Step 4. Select a Modification / Insert Arrangement Step. Commercial Connector Type Designed to be Equivalent to oeing ACC63 Step 4. Select a & Insert Arrangement from chart on pg. 46. s 2, 4, 8, 20, 24, 28 are available. Insert Arrangements for these size shells are given on page 46. size and insert arrangement are written together. First number represents, second number is the Insert Arrangement. Step 5. Select a Type (Crimp) P S Type Pin Socket Alternate Finish or Without Alternate Keying Position of Step 7. Select an Alternate Keying Position - Rotation of master key/keyway of shell. Omit for N for normal. Use 06, 07, 08, 09 or Y for alternate keying positions. See page 46 for descriptions. Step 8. Variation for more information at Variation SK -2 E 8-4 P D 08 XXX Accessory Teeth per MIL-DTL-83723, Series III (normally 3 teeth) 360 Accessory Teeth per MS355 Plug and Receptacle D P S 360 Accessory Teeth per MS355,EMI Grounding Spring on Plug only Pin, Gold plate per SAE AS39029* Socket, Gold plate per SAE AS39029* Step 8. With Option A With and Sealing Plugs (Letter A to be used on purchase orders only, and will not appear on connector as part of connector part number.) Leave blank without contacts and sealing plugs *supersedes MIL-C No designation needed for shells with accessory teeth per MIL-DTL-83723, Series III (normally 3 teeth). E F 360 Accessory Teeth per MS355 Plug and Receptacle 360 Accessory Teeth per MS355, EMI Grounding Spring on Plug only Step 6. Alternate Finish or without D E Gold per SAE AS39029* Without contacts and sealing plugs Y26 Marking per MIL-DTL-83723/33 & /34 (Required with ACC63CM/CN Series) No variation suffix - connector will incorporate Mil-Spec AS39020 contacts III II I SJT III 505 Matrix 2 Matrix Pyle Crimp Rear Release Matrix Pyle Printed Circuit oard EMI Filter Transient High Speed Options 5

16 How to Order ASD Designation Options High Speed EMI Filter Printed III Transient Circuit oard Pyle Crimp Rear Release Matrix Matrix Pyle Matrix 2 SJT I II III MIL-DTL-83723, Series III Connector Type Service Class Style /Insert Arrangement Step. Select an ASD Designated/European Standards Connector Type Style Alternate Keying Position of ASD DESIGNATION EN2997 KE F 6 EN2997 ASD Designation Note: ASD supersedes AECMA Designation Step 2. Select a Service Class Standard Temperature Class K Threaded, Stainless Steel, 200 C S Threaded, Stainless Steel, EMI Grounding Spring on Plug, 200 C Y Stainless Steel Hermetic with Solderwell, 200 C High Temperature Class KE Threaded, Stainless Steel Firewall, 260 C SE Threaded, Stainless Steel, EMI Grounding Spring on Plug, 260 C YE Stainless Steel Hermetic with Solderwell, 260 C Step 3. Select a Style 0 Threaded, Square Flange Receptacle Threaded, Solder Mount Receptacle, Hermetic only 6 Threaded Non-Decoupling Plug 7 Threaded Jam Nut (D-Hole Mount) Receptacle Step 4. Select a & Insert Arrangement from chart on pg. 46. & Insert Arrangements are on page 46. First number represents, second number is the Insert Arrangement. Step 5. Select a Type (Crimp) M C A F D Standard Pin #20 Pins with #8 crimpwell Pin Insert less Standard Socket #20 Sockets with #8 crimpwell Socket Insert less Step 6. Select an Alternate Keying Position - Rotation of master key/keyway of shell. Use N for normal. Use 6, 7, 8, 9 or Y for alternate keying positions. See page 46 for descriptions. 52 for more information at

17 How to Order Pyle Commercial Equivalents to ASD Designation/European Standards Pyle MIL-DTL-83723, Series III PYLE COMMERCIAL DESIGNED TO MEET ASD & EUROPEAN STDS. T J Connector Type Service Class Style Modification (Accessory Teeth) / Insert Arrangement Type Alternate Finish or Without Alternate Keying Pos. of T G -2 E 8-4 P D 08 XXX Step. Select a Commercial Connector Type Designed to Meet ASD/European Standards Threaded with O ring seal in receptacle Threaded, Stainless Steel, Static/Dynamic Seal in receptacle Step 2. Select a Service Class G K Stainless steel Stainless steel Firewall Step 3. Select a Style -2 Threaded, Non-Decoupling Plug -7 Threaded, Square Flange Receptacle -9 Threaded, Jam Nut (D-Hole Mount) Receptacle Step 4. Select a Modification No designation needed for shells with accessory teeth per MIL-DTL-83723, Series III (normally 3 teeth). E F 360 Accessory Teeth per MS355 Plug and Receptacle 360 Accessory Teeth per MS355, EMI Grounding Spring on Plug only Step 5. Select a & Insert Arrangement from chart on pg. 46. Variations & Insert Arrangements are on page 46. First number represents, second number is the Insert Arrangement. Step 6. Select a Type (Crimp) P S Pin Socket Step 7. Alt. Finish or without D E Step 8. Select an Alternate Keying Position - Rotation of master key/keyway of shell. Use N for normal. Use 06, 07, 08, 09 or Y for alternate keying positions. See page 46 for descriptions. Step 9. Variations (Designed for Meeting European Specifications) Y44 Y63 Y75 Gold per SAE AS39029* Without contacts 260 C Capability (Euro Market) 200 C Capability (Euro Market) Older designation superseded by Y III II I SJT III 505 Matrix 2 Matrix Pyle Crimp Rear Release Matrix Pyle Printed Circuit oard EMI Filter Transient High Speed Options *supersedes MIL-C for more information at

18 Options High Speed EMI Filter Printed III Transient Circuit oard Pyle Crimp Rear Release Matrix Matrix Pyle Matrix 2 SJT I II III MIL-DTL-83723, Series III MEETS SOCIETY OF RITISH AEROSPACE CO./ ROLLS ROYCE STANDARDS ESC0 ESC How to Order ESC0/ for SAC and Rolls Royce Standards Step. Select a Connector Type that Meets European Specifications for Society of ritish Co./Rolls Royce Standards Threaded, asic High Temperature Connector, 260 C Firewall Threaded, High Temperature Connector (260 C Firewall) with 00% Scoop-Proof Recessed Pins Step 2. Select a Service Class Step 4. Select a & Insert Arrangement from chart on pg. 46. & Insert Arrangements are on page 46. First number represents, second number is the Insert Arrangement Connector Type Service Class Style Threaded, Square Flange Receptacle with 360 Accessory 0 Teeth per MS355 Threaded, Hermetic Solder Mount Receptacle 2 Threaded, Hermetic Square Flange Receptacle 3 Threaded, Hermetic Jam Nut (D-Hole Mount) Receptacle 6 High Temperature Class KE Threaded, Stainless Steel Firewall, 260 C SE Threaded, Stainless Steel, EMI Grounding Spring on Plug, 260 C YE Step 3. Select a Style / Insert Arrangement Type Step 5. Select a Type (Crimp) P Pin S Socket All connectors are supplied without contacts except Styles, 2 and 3 Step 7. Select an Alternate Keying Position - Rotation of master key/keyway of shell. Use N for normal. Use 6, 7, 8, 9 or Y for alternate keying positions. See page 46 for descriptions. Step 8. Variations Alternate Keying Position of Variations ESC0 KE S 6 X Threaded, Stainless Steel Hermetic with Solderwell, 260 C Threaded, Non-Decoupling Plug with 360 Accessory Teeth per MS355 O (Alpha) A asic Connector, no Variations Lockwire Holes on Plug 54 for more information at

19 How to Order Pyle Commercial Equivalent to ESC European Specifications Scoop-Proof only MIL-DTL-83723, Series III Connector Type Style / Insert Arrangement Type Finish Alternate Keying Position of Variations COMMERCIAL HTK S D 06 XXXX III II I SJT HTK HNK HSK Step. Select a Commercial Connector Type Equivalent to ESC European Specifications Threaded, asic ESC-, Class K (Choice of temperature rating 260 or 200 is in the Variations for this part number). Same as HTK except Electroless Nickel Plated Same as HTK, except this is a special designator for oeing Company Step 2. Select a Style -2-7 Threaded Non-Decoupling Plug with 00% Scoop-Proof Recessed Pins Square Flange Receptacle with 00% Scoop-Proof Recessed Pins Step 3. Select a & Insert Arrangement. s 2, 4, 8, 20, 24, 28 are available. Insert Arrangements for these size shells are given on page 46. size and insert arrangement are written together. First number represents, second number is the Insert Arrangement. Step 4. Select a Type (Crimp) P S Pin Socket Step 5. Select a Finish or without D Gold per AS39029* E Socket Special High Temperature are another option - consult for ordering information. Step 6. Select an Alternate Keying Position - Rotation of master key/keyway of shell. Use N for normal. Use 06, 07, 08, 09 or Y for alternate keying positions. See page 46 for descriptions. Step 7. Variations Y C Y C *supersedes MIL-C III 505 Matrix 2 Matrix Pyle Crimp Rear Release Matrix Pyle Printed Circuit oard EMI Filter Transient High Speed Options for more information at

20 Options High Speed EMI Filter Printed III Transient Circuit oard Pyle Crimp Rear Release Matrix Matrix Pyle Matrix 2 SJT I II III Step. Military Connector Type How to Order Hermetic, Military or Pyle Commercial Connector Style and Type (Crimp) / Insert Arrangement MIL-DTL-83723, Connector Service Series III Type Class MILITARY HERMETIC M83723 /88 y M83723 MIL-DTL Series III Connectors Step 2. Select a Military Hermetic Connector Style Alternate Keying Position of Pyle Connector / Insert Alternate Alternate Keying Varia- MIL-DTL-83723, Series III Style Style Arrangement Type Style Finish Position of tions COMMERCIAL HERMETIC TY S D 06 XXXX (Refer to military specification slash sheet number.) /88 Hermetic, Threaded Square Flange Receptacle /89 Hermetic, Threaded Jam Nut (D-Hole Mount) Receptacle /90 Hermetic, Threaded Solder Mounted Receptacle Step 3. Select a Service Class Y P Hermetic, Stainless Steel, 200 C, with Solderwell Hermetic, Stainless Steel, 200 C, with Eyelet For availability of a Plated Steel, consult. Step 4. Select a & Insert Arrangement from chart on pg. 46. (except sizes 24 and 28 are not available in Hermetic Styles.) & Insert Arrangements are on page 46. First number represents, second number is the Insert Arrangement Step 5. Select an Alternate Keying Position - Rotation of master key/keyway of shell. Use N for normal. Use 6, 7, 8, 9 or Y for alternate keying positions. See page 46 for descriptions. Step. Select a Commercial Hermetic Connector Style TY FY NY Hermetic, Threaded, Stainless Steel, with O ring seal Hermetic, Threaded, Stainless Steel, with Static/Dynamic Seal Hermetic, Threaded, Stainless Steel, Electro-deposited Nickel plated, with Static/Dynamic Seal Step 2. Select a Style -7 Square Flange Receptacle -9 Jam Nut (D-Hole Mount) Receptacle -4 Solder Mounted Receptacle Step 3. Select a & Insert Arrangement from chart on pg. 46. (except sizes 24 and 28 are not available in Hermetic Styles). & Insert Arrangements are on page 46. First number represents, second number is the Insert Arrangement Step 4. Select a Type (Crimp) P Pin Step 5. Select a Style Solderwell (Mil-Spec Type) 4 Eyelet Step 6. Alternate Finish D V (per MIL-DTL-83723, III) Gold Gold Step 7. Select an Alternate Keying Position - Rotation of master key/keyway of shell. Omit for normal. Use 06, 07, 08, 09 or Y for alternate keying positions. See page 46 for descriptions. Step 8. Variations Y44 Y63 Y86 Y C Capability (Euro Market) 200 C Capability (Euro Market) 260 C Capability per G.E. M50TF3564, Class 200 C Capability per G.E. M50TF3564, Class A 56 for more information at

21 Square Flange Receptacle, Threaded Coupling A A ±.005 ±.005 D Dia. F Dia. Rear H Accessory Thread Class 2A sizes 8 and 0 are not available in oeing ACC63 styles and commercial ESC styles. ayonet style square flange receptacles are shown on page 60. Hermetic threaded style square flange receptacles are shown on page 63. All dimensions for reference only. J Coupling Thread Class 2A M83723/82 / M83723/83 T( )-7 J/J8/N/N8/NK-7 ACC63CN SK-7 EN2997( )0 T( )/J( )-7 ESC0( )0 ESC( )0 HTK/HNK/HSK-7 See Quick Reference page 40 for the variety of ordering options for square flange receptacles with threaded coupling. The How to Order pages (49-56) give complete part number breakdowns. P Dia. Front PART # UNF UNF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF A 4 Mounting Holes s 8 to 22.25/.6 3.7/2.94 s 24 & 28.54/ /3.68 A ±.005 ±.005 Fully Mated X Dia. P Dia. Front J Coupling Thread D Dia When fully mated with plug this band will be covered. ( is red on military types; can be red or blue on commercial types) F Dia. Rear H Accessory Thread P Dia. Front Millimeters X Dia lue Indicates Rear Release System 3 Teeth Equally Spaced 20 Apart F Dia. Rear D Dia. Optional 360 Accessory Teeth Inches X Dia III II I SJT III 505 Matrix 2 Matrix Pyle Crimp Rear Release Matrix Pyle Printed Circuit oard EMI Filter Transient High Speed Options for more information at