97 series crimp type plugs with solid shells
|
|
|
- Bryce Pearson
- 5 years ago
- Views:
Transcription
1 97 series crimp type plugs with solid shells A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/ / / / S 1-7/ / / S 1-15/ / / / S 1-15/ / / / / / / / / / / / / / / / / / / / / / * 2-3/ / / / * 2-3/ / / A straight plug Sturdy, simple to assemble. Coupling ring machined from solid aluminum bar stock for high tensile strength. Mates with all types of MS receptacles. Front shell includes polarizing keyway. Back shell is threaded for standard MS/AN fittings A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/ / / / S 1-7/ / / S 1-15/ / / / S 1-15/ / / / / / / / / / / / / / / / / / / / / / / / / * 2-3/ / / / * 2-3/ / / A quick-disconnect plug For fast connect/disconnect applications. Front shell has polarizing keyway. Mates with all types of MS receptacles. Back shell is threaded for standard MS/AN fittings A L Ref. Q Max. U Ref. V Y Ref. Inch mm Inch mm Inch mm Fitting Threads Inch mm 10SL 1-5/ / / / S 1-3/ / / S 1-3/ / / / S 1-1/ / / / / / / / / / / / / / / / / / / / / / / / / / / * Available for A only A angle plug For use where space in front of panel or wall is at a premium. Swivel ring and plate combination allow cable take off at any angle relative to front shell polarizing key. Back shell is threaded for standard MS/AN fittings. 25
2 97 series special purpose connectors Box Type Plugs ( construction) Mounts directly on box or housing. For direct connection of two pieces of equipment without interconnecting wires. Available in all sizes; male or female inserts. To order, complete part number ( ) by adding proper insert number. Example: S. To prevent connector from rotating: Order deviation 205 (single stake, with swivel ring pinned) or 206 (double staking, with both swivel plate and swivel ring pinned). Example: S (205) or S (206). K L Q R S Z Mounting Inch mm Inch mm Inch mm Inch mm Inch mm Threads 8S 1/ / / / / S 1/ / / / / S 5/ / / / / / / / S 5/ / / / / / / / / / S 5/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Small Flange Receptacle Small flange, (115) construction, receptacles are available in sizes 12S and 14S with pin or socket inserts and in size 10SL with pin contacts only. To order, complete part number ( ) by adding proper insert and construction numbers; A12S-4S (115). A K Ref. L Max. M Ref. N Ref. R Ref. S Ref. Coupling Threads Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm 10SL 5/8-24 5/ / / / / S 3/4-20 3/ / / / / S 7/8-20 3/ / / / /
3 97 series special purpose connectors ECG s Special purpose connectors used for process control and medical instrumentation applications A14S-6S (639) with insert rotated 30 off normal position between contacts A and F SQ..906 SQ A14S-6P (639) with insert rotated 30 off normal position between contacts A and F /4-20 UNEF-2A Thread Convenience Outlets Rated for duty at 15 amps. Provide 1000 VRMS dielectric withstanding voltage and 100 megohms insulation resistance. Will withstand 1000 cycles of use Convenience plug Convenience outlet Convenience outlet with metal cap and chain SQ SQ
4 97 series solder type how to order Example of part number for solder type connectors is given below A S Y (847) (639) Series Number 97 - Like MS but Amphenol Shell Type 3100 Wall Receptacle 3101 Cable Receptacle 3102 Box Receptacle 3106 Straight Plug 3107 Quick Disconnect Plug 3108 Angle Plug Shell Construction A - Solid Backshell B - Split Backshell Shell 8S, 10SL, 12S, 14S, 14, 16S, 16 18, 20, 22, 24, 28, 32, 36 Insert Configuration Number See insert availability listing - pages 4 & 5, and see insert arrangement illustrations - pages Shell Finish Omit for standard O.D. cadmium finish (604) Gray anodized (608) Black anodized (621) Black zinc alloy (624) Green zinc alloy (639) Clear cadmium (640) Conductive black zinc alloy (689) Electroless nickel Deviation from standard A&B construction Omit this suffix if standard construction is desired (115) Small flange receptacle (426) Gold over silver plating on contacts (438) Construction for potting (see page 30 for additional deviations) (936) plug with safety wire holes in coupling nut Consult Amphenol, Sidney, NY for other deviations. Alternate Insert Positions Omit for standard position W, X, Y or Z for alternate positions, depending on insert (see page 12 for positions available) Contact Type P = Pin S = Socket Note: Accessories for 97 Series s should be ordered with matching connector plating. See accessory pages
5 97 series crimp type how to order Example of part number for crimp type connectors is given below A S Y (621) Series Number 97 - designates AMPHENOL 97 Series Shell Type 4100 Wall Receptacle 4101 Cable Receptacle 4102 Box Receptacle 4106 Straight Plug 4107 Quick Disconnect Plug 4108 Angle Plug Note: 4 in part number designates crimp contact rear release connector Shell Construction A - Solid Backshell B - Split Backshell Shell 10SL, 12S, 14S, 16S, 18, 20, 22, 24, 28, 32, 36 Shell Finish Omit for standard (639) bright cadmium finish (604) Gray anodized (608) Black anodized (621) Black zinc alloy (624) Green zinc alloy (640) Conductive black zinc alloy (662) Olive drab cadmium (689) Electroless nickel Alternate Insert Positions Omit for standard position W, X, Y or Z for alternate positions, depending on insert (see page 21 for positions available) Contact Type* P = Pin S = Socket Insert Configuration Number See insert availability listing - page 21, and see insert arrangement illustrations - pages 22 and 23. * Contacts are not supplied with connectors, and must be ordered separately. See following pages for contact information. Note: Accessories for 97 Series s should be ordered with matching connector plating. See accessory pages
Amphenol 97 Series MIL-DTL-5015
Amphenol 97 Series MIL-DTL-5015 MATES WITH ALL THREADED MIL-DTL-5015 CONNECTORS The 97 series is a durable, cost-effective MIL-DTL-5015 available in a variety of shell styles, sizes, contacts, and layouts.
8D Series D38999 Aluminum Series
onnector part numbers Basic Series 8D 0-11 W 35 P N L style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI shielding Also available:. Square flange receptacle
Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard
Tri-Start Threaded Coupling General Information Page Guide Order... C29 Weight... C30 Plugs... C31 In-Line... C32 Square Flange... C33 Jam Nut... C34 PCB Sq Flange... C35 PCBJam Nut... C36 PCB Double Flange.
MIL-DTL-38999Series III Composite Series
MIL-DTL-38999Series III Composite Series 25 Connector part numbers Basic Series 8D 0-11 J 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 5: Plug with RFI shielding. Type: -: Connectors
Amphenol 67 and 165 Series Miniaturized Standard Connectors
Amphenol 67 and 165 Series Miniaturized Standard Connectors 12-023-6 Amphenol Table of Contents Page No. Amphenol 67 Series Minni E General Information, Design Characteristics, Customer Options.........................
8D Series D38999 Composite Series
Connector part numbers Basic Series 8D 0-11 J 35 P N L Shell style: 0: Square flange receptacle 5: Plug with RFI shielding Type: - : Connectors with standard crimp contacts. L: Receptacle with long PC
SCE. Snatch Connector Electrical Series
SCE Snatch Connector Electrical Series SCE is a miniature product with a silent push to mate and pull to release design across two styles of cable receptacles. All inserts and contacts are moulded in place,
Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle
Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle 801-009 and 801-010 - Ordering Information In-Line Style 01 Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02 How To Order
PART NUMBER BREAKDOWN CP A 70 1 W D H - 10
SERIES 70 EMI/RFI Shielding Backshell Non-Environmental Outer Shield Termination Series 70 Backshells provide EMI/RFI protection using ferrules to secure a cable s outer shield. They do not offer environmental
8D Series D38999 Composite Series
Connector part numbers Basic Series 8D 0-11 J 35 P N L Shell style: 0: Square flange receptacle 5: Plug with RFI shielding Type: -: Connectors with standard crimp contacts. L: Receptacle with long PC tail
MIL-DTL 38999Series III Aluminium Series
MIL-DTL 38999Series III Aluminium Series 13 Connector part numbers Basic Series 8D 0-11 W 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI
THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS
MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL
Features and Application
MIL-DTL-38999 Features and Application Series II Features and Application MIL-DTL-38999 Series II connectors feature a bayonet coupling mechanism with lower profile design and rear-removable crimp contact
Amphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors
Amphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors 12-026-2 Crimped Rear Release Qualified for Environmental and Firewall Applications Amphenol This catalog covers the Amphenol /Matrix MIL-C-
Series 801 Mighty Mouse Double-Start ACME Thread Receptacle
ouble-start ACME Thread Receptacle 801-009 and 801-010 Ordering Information Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02/12/22 In-Line Style 01 How To Order Sample Part Number 801-010
TABLE OF CONTENTS. Amphenol Aerospace is a Certified ISO 9001 Manufacturer.
This catalog covers the Amphenol /Matrix MIL-C- 83723, Series III Connectors. These connectors incorporate crimp rear release contacts. There is great diversity within this cylindrical family, with the
MIL-DTL Series 1 Solder Type PT
MIL-DTL-26482 Series 1 Solder Type PT The Amphenol Miniature Cylindrical Connector Series offers high density contact arrangements in a miniature, circular metal shell. This connector is environmentally
D X X - XX - XX - X X
CONSTRUCTION MATERIAL FINISH Shell Alluminium Alloy Cadmium Olive Drab over Electroless Nickle Electroless Nickle Insert Engineering Plastic Natural O-ring Silicone Rubber Natural Contact Retainer Beryllium
Amphenol. Amphenol /Matrix MIL-C-83723, Series III Connectors. Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments
Amphenol /Matrix MIL-C-, Series III Connectors -0- Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments Amphenol This catalog covers the Amphenol /Matrix MIL-C-, Series
2M805 Tri-Start Threaded Coupling
2M805 Tri-Start Threaded Coupling General Information 2M Specs 2M801 2M803 2M804 2M805 Series Micro Miniature Connectors: s 2M805 Series of connectors offers the best EMI and Vibration performance among
MG RANGE CONTENTS. General Specification Shell Styles... 4, 5, 6. Ordering Information Connectors... 7
CONTENTS General Specification........ 3 Shell Styles..... 4, 5, 6 Ordering Information Connectors... 7 Ordering Information Protective Caps... 8 Ordering Information Square Gaskets... 8 Insert Configurations.
HT STRAIGHT ADAPTER, WRENCH FLATS ( )
HT7006 - STRAIGHT ADAPTER, WRENCH FLATS (12387118) MIL-DTL-38999 SERIES III; MIL-DTL-38999 SERIES IV HT7 0 06-11 - 6-8 SERIES ADAPTER ANGLE STRAIGHT - 0 CONNECTOR SERIES (INTERFACE) FINISH 8 - ELECTROLESS
06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING
06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING LENGTH STYLE Y SPECIFICATION: WHEN THE DESIRED ADAPTER S C DIAMETER IS
38999 Series III Composite Connectors
8D Series Composite 38999 Series III Composite Connectors The RoHS connector with the best performance in weight saving and corrosion resistance for MilAero applications. MIL-DTL-38999 Standard Versatility
MIL-C Fiber Optic Connectors
Developed and produced by Packard-Hughes Interconnect (PHI), the MIL-C-28876 Fiber Optic Connector features low optical insertion loss, repeatability, exceptional strain relief, and reliability in harsh
Electrical Dielectric withstanding Altitude Service At ground 1500 Vrms m 600 Vrms m 400 Vrms m 200 Vrms
Applications Engine area/sensors in harsh environments, railways (brake system), for all purposes in severe climatical environment and high temperature. Standards NFL 54143 - EN 2997 Description Screw
HyperGrip - Push/Pull Plastic Circular Connectors
A B C D E F G H J K HG2 HG3 HG4 Ø1.014 [25.76] 1.220 [30.98] Ø0.866 [22.00] 0.272 [6.91] 1.637 [41.59] 3.265 [82.93] Ø0.502 [12.75] Ø0.656 [16.66] 2.700 [68.56] 3.724 [94.60] Ø1.172 [29.77] 1.137 [28.87]
LMJ RANGE CONTENTS. Description and characteristics Shell Styles Ordering Information - Connectors... 7
CONTENTS Description and characteristics..... 3-4 Shell Styles... 5-6 Ordering Information - Connectors.... 7 Ordering Information - Crimp Tooling.... 8 Ordering Information Square Gaskets..... 8 Ordering
Miniature Break Away Release Connector
8 Series reak way Miniature reak way Release onnector Space saving with scoop proof connector for harsh and EMI applications. compact solution iameter up to 45% smaller than 38999 9. Integrated backshell:
Amphenol. Bombardier Transportation Design Guide for Amphenol GT Series Reverse Bayonet Coupling Connectors
Bombardier Transportation Design Guide for Amphenol GT Series Reverse Bayonet Coupling Connectors -2123 Date: 10-01-2004 FOR USE BY BOMBARDIER & BOMBARDIER S SUBCONTRACTORS Amphenol Table of Contents Page
Connection Systems. Bulls-Eye Subminiature Circular Connectors
Connection Systems Bulls-Eye Subminiature Circular Connectors Connection Systems Bulls-Eye Subminiature Circular Connectors Hit the target every time with our high density connectors that provide high
AMPHENOL PCD SHENZHEN ASGTC. Ruggedized Connector Series for Rail & Mass Transit and Other Harsh Environmental Applications.
AMPHENOL PCD SHENZHEN ASGTC Ruggedized Connector Series for Rail & Mass Transit and Other Harsh Environmental Applications 1 www.amphenolpcd.com.cn CONTENT CONTENT ASGTC Series Connector structure.........
MMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
Amphenol 348 Series High Density Connectors
348 Series High Density Connectors 12-093-6 348 Series I, II Table of Contents 348 Series Page No. High Density Connectors........................................................................ 1 Specifications.................................................................................
HV HV Series Connector and cable assembly
Amphenol Amphenol PCD Shenzhen HV HV Series Connector and cable assembly www.amphenolpcd.com.cn CONTENT HV Series connector and cable assembly PRODUCT INTRODUCTION............ 2 HOW TO ORDER: RECEPTACLE.........
Series 80 Mighty Mouse Technical Reference Complete Product Specification
Summary Performance Specifications Current Rating (Maximum): Size #23 Contact: 5 A., Size #20 contact: 7.5 A., Size #16 contact: 13 A., Size #12 contact: 23 A. Test Voltage (Dielectric Withstanding Voltage)
2M805 Tri-Start Threaded Coupling
2M805 Tri-Start Threaded Coupling Ordering Guide for 2M805 Plug & Receptacle 2M805 Series Connector - Alternate Series Style Service Class Insert Arrg. Contact Type Position 2M805-00X -16 C 15-37 S A SERIES
2M Accessories, Contacts, and Tools. 2M Accessories, Contacts, and tools. Page Guide. Accessories. Micro Contacts Tools
2M, Contacts, and Tools Page Guide Contact Tools... 98 Assembly... 99-100 Plugs Tools... 101, 102 2M Python... 103 Strain Relief Clamp.. 104, 105 Micro Band Adapter... 106-109 Enviromental Backshells...
Proven Quality, Reliability & Expertise
CA Threaded Catalog Proven Quality, Reliability & Expertise ITT Cannon is a leading global manufacturer of connector products serving international customers in the aerospace and defense, medical, energy,
MIL-DTL Series IV Connectors
DEPENDABLE Secure breech lock coupling 100% scoop-proof Pin-to-pin mating protection helps prevent failures RUGGED Mated connectors help withstand high-impact shock Rear accessory threads help provide
Amphenol Amphenol PCD Shenzhen HVBI High Voltage with Inter-Lock
Amphenol Amphenol PCD Shenzhen HVBI High Voltage with Inter-Lock www.amphenolpcd.com.cn CONTENT HVBI PRODUCT INTRODUCTION............ 2 HOW TO ORDER: RECEPTACLE...... 3 alternate KEYING positions............
RECTANGULAR CONNECTORS PER ARINC 404 RM-RME SERIES
Rev. C, March, 2016 RECTANGULAR CONNECTORS PER ARINC 404 RM-RME SERIES Connectors with wide range of shell configurations/modifications, contact arrangements and contacts to meet ARINC 404 Specification
MIL-C (Series 1, 2, 3 & 4) Updated February 2013 (Rev )
MIL-C-3 (Series, 2, 3 & 4) Updated February 23 (Rev 23-2) ABN: 6 2 6 24 The D3 Series of connectors were designed for both performance and mechanical robustness to meet many demanding applications in:
ITT Cannon KJL Series MIL-DTL Series I Connectors
APPLICATIONS FEATURES ITT Cannon KJL Series MIL-DTL-38999 Series I Connectors High performance military aircraft Commercial airlines Communications equipment Armored personnel carriers & tanks QUICK-MATING
- - Introduction. Specifications
14 SERIES Introduction Amphenol 14 series connectors are water resistant, polarised, five and six contact electrical connectors for use in low voltage audio frequency circuits and applications. They employ
HIGH DENSITY INTERCONNECTS HD38999
HIGH DENITY INTERCONNECT HD38999 PD-229-2 PD-208-26 A CONNECTOR THAT TART AT 9 GOE TO 87 CONTACT The HD38999 family of connectors has 30% more contact density than the highest density il pec 38999 connectors
Amphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003
Amphenol eries SJT Series SJT VG 96912, Series 1 PAN 6433-2 JN 1003 Ordering information Ordering example: SJT G 06 RT 14-35 P A 014 Series (p. 9, 15, 18) SJT Scoop proof (100% scoop-proof) Junior (Miniature
POLAMCO HIGH POWER CONNECTORS STYLE
POLAMCO HIGH POWER CONNECTORS 38999 STYLE Robust & reliable connectors designed for harsh environments Contents Part Description System... 4 Materials... 4 Plating Options... 5 SECTION ONE: Plugs 1.1 Shielded
P Straight PCB Panel Mount Receptacle
How To Order PCB Panel Mount Receptacle HOW TO ORDER Sample Part Number J-25P2 M P A Part Number PIN CONTACTS WITH STRAIGHT PCB TERMINATION connectors are designed for rear-panel mounting and are supplied
MIL-C Circular Connectors
MIL-C-28840 Circular Connectors A high density, harsh environment connector designed to meet the most demanding environmental conditions and RFI/EMI shielding requirements. Delphi Connection Systems delivers
AC Series. Threaded Coupling Connectors MIL-C-5015 Commercial & QPL d. cinch.com
AC Series Threaded Coupling Connectors MIL-C-5015 Commercial & QPL d cinch.com PRODUCT INDEX AC Series Threaded Coupling Connectors MIL-C-5015 Commercial & QPL d Contents Nomenclature Guide 4 Product Data
Electrical Test voltage (Vrms) Service sea level at m M I II
8LT eries Applications High density connectors for all military and aeronautical purposes. tandards MIL-C 38999 eries I - QPL approved NC 93422 HE 308 DTAT-C 5935 X 0005 (HE 308 standard) GAM/T1 list Description
AMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
CA-COM Industrial Connectors
CA-COM Industrial Connectors ITT Corporation ITT is a diversified leading manufacturer of highly engineered critical components and customized technology solutions for the energy, transportation and industrial
MIL-C 26482G Series II
pplications or all general purposes in military applications Standards MIL 2642 Series II QPL approved escription Standard version luminium alloy : olive green, nickel or, black, anodized plating ayonet
SMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43
Description The name derives from SubMiniature B (the second subminiature design). The was developed in the 1960 s. is a smaller version of the SMA with snap-on coupling. Amphenol s connectors conform
Circular Connectors. Contents. Introduction Specifications Cable Connectors Panel Connectors Accessories
ircular onnectors ontents Introduction Specifications able onnectors Panel onnectors ccessories ircular onnectors These connectors are designed for use in harsh environments. The high specification connectors
SJT Series. Amphenol. Aerospace. Amphenol
eries TABE OF CONTENT - coop-proof Design of JT eries & tandard Mounting Dimensions of JT eries - Meet European pecification Applications Features, pecifications................... 98 How to Order, Rotations...............
WILDCAT CONNECTORS
UTSCH WILCAT 38999 CONNCTORS Higher contact densities in a familiar MIL-TL-38999 form factor AROSPAC, FNS & MARIN /// UTSCH WILCAT 38999 CONNCTORS 60 0 80 36 65 88 5 5 8 0 90 70 UTSCH WILCAT 38999 CONNCTORS
38999 All In One! Series III Integrated Backshell
38999 Series III Integrated Backshell 38999 All In One! Plug with integrated backshell: all the features and the benefits of 38999 Series III connectors now ready to use. Embedded backshell EMI backshell
MIL-DTL-83723, Series III, Pyle
TALE OF CONTENTS Table of Contents....................... 37 Design Features, Customer Options, Manufacturer s Specifications. 38, 39 Quick Reference of Choices - Threaded Styles......... 40-42 Quick Reference
DEUTSCH HDJ Series Filter Connectors MIL-DTL SERIES I.5
DEUTSCH HDJ Series connectors are subminiature environment-class connectors with high and medium-density insert arrangements. They are based on MIL-DTL-38999 Series I coupling interface lengths and Series
Amphenol /Pyle MIL-C Connectors
Amphenol /Pyle MIL-C-26500 Connectors MS-101-2 Miniature Cylindrical Connectors for Military and Aerospace Applications Amphenol Table of Contents Amphenol /Pyle MIL-C-26500 Miniature Cylindrical Connectors
Amphenol 62GB solder connectors
This catalogue to be used in conjunction with Catalogues: CE-2Pa 62GB Series Receptacles CE-2Aa 62GB Series Accessories Amphenol 62GB solder connectors This miniature bayonet lock connector series offers
PART NUMBER BREAKDOWN
SERIES 34 O-Ring Sealed Shorting Cap Series 34 Shorting Caps are for use at the rear of shorting plugs, special test connectors, fiber optic loopbacks and other applications. variety of lanyard options
MCX Amphenol. Description MCX. 50 Ohm Coaxial Connectors Specifications 18 Straight & Right Angle Crimp 19 Straight Solder & PCB 20-21
Description connectors conform to the European CECC 22220 Spec and was introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the outer diameter of the plug
Waterproof Circular Connectors Conforming to European Safety Standards
Waterproof Circular Connectors Conforming to European Safety Standards CE05 Series Conforming Standard MIL-DTL-5015 Wa t e r p r o o f IP 67 OUTLINE The industrial machinery including the machine tools
2M804 Push-Pull Receptacles Protection Caps Ordering Guide for 2M
Push-Pull Receptacles Protection aps Ordering Guide for 2M667-202 Push-Pull Protective aps are available in plug and receptacle versions. Protective caps keep the connector interface dry and clean while
µcom-10gb + Harsh Environment 10Gb Ethernet Micro Connectors
Harsh Environment 10Gb Ethernet Micro onnectors 15mm Description µom-series is a new range of connectors designed to address the latest trends of the industry : miniaturization and high speed, with the
FR ITS RJ45-1 W PHM F6
CODE SCALE SERIES SHEET WEIGHT CODE SCALE SERIES DESCRIPTION SHEET.2x45 R.2 Max. Max. specific indicationweight DATE File:RECEPTACLE_FEMM--PCB_3 - Copia DESCRIPTION.2x45 R.2 Max. Max. DATE File:RECEPTACLE_FEMM--PCB_3
Features and Application
ML-DTL-83723 Series Features and Application Bayonet and Threaded Coupling Features and Application ML-DTL-83723 Series family offers connectors with bayonet and threaded coupling including lanyard-release
PT/451. Subminiature cylindrical connectors PT/451
PT/451 Subminiature cylindrical connectors 3 grooves 3 rivets 5 differents keys MAIN CHARACTERISTICS E120/C Main features of each series PT/451 Series solder version (Military, aeronautics and industrial
Excel Mate Mono High Voltage with Inter-Lock
Amphenol Amphenol PCD Shenzhen Excel Mate Mono High Voltage with Inter-Lock AMPHENOL PCD SHENZHEN www.amphenolpcd.com.cn CONTENT ExcelMate Mono (HVBI) PRODUCT INTRODUCTION............ 2 HOW TO ORDER: RECEPTACLE......
Now Available in Black Zinc Nickel
847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances
EN3716 SAE AS81659 ARINC
6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical
MIL-DTL-83723, Series III, Pyle
MIL-DTL-83723, Series III, TALE OF CONTENTS FOR SECTION Design Features, Customer Options, Specifications.... 8, 9 Quick Reference of Choices - Threaded Styles.... 20-22 Quick Reference of Choices - ayonet
Amphenol MIL-DTL-83723, Series III, Pyle
Amphenol MIL-DTL-83723, Series III, Pyle TALE OF CONTENTS MIL-DTL-83723, Series III, Pyle : Design Features, Customer Options, Manufacturer s Specifications. 363, 364 Quick Reference of Choices - Threaded
Waterproof Series Waterproof
Waterproof Series Waterproof Technical Data Panel connector Panel connector, cable connector and coupler connector circular housing Locking screw connection Protection IP 65 with flat-gasket for panel
VG95234 Qualified Bayonet-Lock Connectors
Qualified Bayonet-Lock Crimp-Contact MIL-DTL-5015 Type Electrical for Ruggedized Power and Signal Applications United States United Kingdom Germany France Nordic Italy Spain Japan High Voltage Electrical
Integrated Backshell Fire Proof Connector
8535/8536 Series Integrated Backshell Connectors Integrated Backshell Fire Proof Connector Stainless steel screw coupling connector designed for use in aviation harsh environments. Perfect for engines
8T Series. MIL-DTL Series II
Contents Overview 8T Series - Presentation... 06 8T Series - Applications... 06 A universal product platform... 07 Space saving... 08 ox solutions... 08 Shell types... 08 Features by shell types... 09
S Straight PCB Panel Mount Plugs
Sample Part umber K-43 M E P B Part umber PCB Panel Mount Plugs socket contacts with STRAIGHT PCB TERMIATIO Lightweight, rugged vertical mount headers feature gold-plated PC tail contacts for thru-hole
CONNECTORS & RECEPTACLES
60 HEX NUT Used in mounting rear or front of panel receptacles LOCK WASHER Prevents rear or front of panel receptacle from working loose when installed TYPICAL SL172F REAR MOUNT RECEPTACLE THREADED BUSHING
Amphenol Industrial Threaded AIT
mphenol Industrial Threaded IT IT Series is a low cost, MILDTL5015 threaded type connector for use in harsh environmental conditions. This popular, cylindrical connector is particularly well suited to
Amphenol Amphenol PCD Shenzhen. Xcel Power Mate TM.
Amphenol Amphenol PCD Shenzhen Xcel Power Mate TM www.amphenolpcd.com.cn PRODUCT PROFILE Xcel Power Mate TM Auto-latch mating mechanism provides fast and reliable connection with audible and tactile feedback
Amphenol-Tuchel Electronics 44 Series
44 Series Amphenol-Tuchel Electronics 44 Series Cost-effective environmental sealing Amphenol Tuchel 44 series connectors offer cost-effective performance for applications requiring environmental sealing.
BRANCHE CONNECTEURS AEROMILITAIRES. AFD series Norme MIL-C G. Series 2
RN ONNTUR ROMIITIR series Norme MI- 26482 eries 2 ummary Introduction 1 dvantage 2 Technical characteristics 3 art-numbering system 4 tandard equivalence 5 ynoptic 6 rrangements 8 Receptacles 10 lugs 14
Amphenol GB- Series Plugs Miniature Bayonet Lock Connectors Complies with MIL-C CE-2Pa
62 GB- Series Plugs Miniature Bayonet Lock Connectors Complies with MIL-C-26482 CE-2Pa This miniature bayonet lock connector series offers designers important features not found in any other range of connectors.
Amphenol Industrial Reverse Bayonet AIB
AI Coercial and Military Applications Amphenol Industrial Reverse ayonet AI AI Series is basically a MILDTL5015 (MILC5015) connector, but with an improved coupling system. AI Series replaces the threaded
KVBS Reverse bayonet connectors for railway applications
Reverse bayonet connectors for railway applications KVBS connector series derives from the RF CVBS one and it is based on Mil-DTL-5015 and VG95234 specs. The most important advantages are the simpler and
P Panel Mount Receptacles PIN CONTACTS WITH CRIMP TERMINATION
Crimp Terminated Receptacles, How To Order HOW TO ORDR Sample Part Number L-6P6 MT G Part Number Receptacles PIN CONTACTS WITH CRIMP TRMINATION connectors are designed for rear-panel mounting and are supplied
NFF QualiFied CoNNeCtors ith series Easy-to-assEmbly, Rigid insert PowER and signal REliablE REvERsE bayonet CouPling ConnECtoRs June 2013
NF F 61030 Qualified C onn ec to r s ith series Easy-to-AssemblY, Power and Signal Reliable Reverse Bayonet Coupling June 2013 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High
MIL-DTL Series III Connectors
RELIABLE Self-locking threaded coupling 100% scoop proof Contact retention system provides excellent contact retention under severe vibration EMI PROTECTED Grounding fingers for excellent EMI protection
The CL Series of heavy duty connectors is ideal. CL Series. Ruggedized High-Power Connectors. CL Series At a Glance. milnec.com
Series t a lance Series Ruggedized High-Power Connectors The Series of heavy duty connectors is ideal for rugged industrial or military applications that demand high-power delivery. Standardized parts
R49 SERIES TABLE OF CONTENTS
PRODUCT GUIDE R49 SERIES TABLE OF CONTENTS 3 Product Overview 4 Features Spotlight 5 Code Logic 6 Panel Mount Receptacle Female 7 Panel Mount Receptacle Male 8 Cable Mount Receptacle 9 Bulkhead Mount Receptacle
Cannon VG/CA-Bayonet. How to order VG Order reference. How to order Cannon Order reference. Explanation
How to order VG Order reference Series Shell style Dash Shell size Contact arrangement Contact type Contact termination Insulator position Explanation Series Shell style VG95234 A 32 6 S 1 N VG95234 J1,
R49 & R24 PRODUCT GUIDE
PRODUCT GUIDE Amphenol EEC, Inc. 4050 N Rockwell St Chicago IL 60618 USA P 773.463.8343 F 773.463.8344 W eecchicago.com 2 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Product Overview Features Spotlight
MDM MDM MIL-DTL STYLE MIL-DTL STYLE. Applications. Features
MDM Applications Features MIL-DTL-83513 STYLE As the result of the miniaturization of today s sophisticated electronics where more and more electronics are being packed into smaller and lighter electronic
SUPERSEAL MIL-DTL-5015 TYPE REVERSE-BAYONET CONNECTORS: NOW WITH SUPERIOR SEALING, SHIELDING AND CRIMP CONTACT TERMINATION
RJ45 ETHERNET SUPERSEAL MIL-DTL-5015 TYPE REVERSE-BAYONET CONNECTORS: NOW WITH SUPERIOR SEALING, SHIELDING AND CRIMP CONTACT TERMINATION FIELD-READY RJ45 ETHERNET MIL-DTL-5015 TYPE REVERSE-BAYONET SUPERSEAL
Rail Product Selection Guide. Proven rail expertise. Global capabilities.
Rail Product Selection Guide Proven rail expertise. Global capabilities. We Connect When it matters most. UNDER CAR TRAIN CONTROL ITT Veam and Cannon connectors support today s advanced train control systems,