VG95234 Qualified Bayonet-Lock Connectors

Size: px
Start display at page:

Download "VG95234 Qualified Bayonet-Lock Connectors"

Transcription

1 Qualified Bayonet-Lock Crimp-Contact MIL-DTL-5015 Type Electrical for Ruggedized Power and Signal Applications United States United Kingdom Germany France Nordic Italy Spain Japan

2 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage electrical power distribution is a critical component of the 100% electric Tesla Roadster. The reliable distribution of electrical energy from the car s lithium-ion energy storage system to the vehicle s motor, electronic control module, HVAC system, transmission and regenerative braking unit depends on a high-performance wiring system made up of high-temperature shielded conduit and ruggedized reverse-bayonet power connectors all made by Glenair. Glenair is on the forefront of innovative efforts to advance the reliability and performance of electric vehicles. Glenair power connectors, cables and conduit are deployed in high-voltage power management and distribution applications for systems as demanding as military vehicles and as fast as the Tesla Roadster. EU Sales: Glenair Italia, S.r.L. Tel: sales-italia@glenair.com North American Sales: Glenair Connecticut, Tel: sales@glenair.com Factory Support: Commital S.p.a. (Italy) Tel: commital@commital.com

3 Bayonet-Lock Assemblies Product Line Overview Introduction Qualified Power and Signal, for Military Vehicles. Harsh Application Environments Glenair s VG 9534 Reverse Bayonet Power and Signal Connector is ideally suited for all inter-car, under-car, trainline and other rugged transportation applications. The connector family is also popularly applied to industrial and military applications such as ground vehicles and electric cars. Qualifi ed to VG 9534, the reverse bayonet coupling provides easier and faster coupling, especially when the connector is situated in an awkward or hard to reach location. The connector s high resistance to vibration and shock provides reliable mating in even the most rigorous application environments. Environmental protection to IP67 levels provides additional reliability. Rugged Materials Glenair s VG 9534 connector series is fabricated in aluminum alloy with surface plating IAW QQP- 416 Type II Class 3. Easy-to-terminate crimp contacts are made from silver plated copper alloy. The standard insert material is synthetic rubber which provides durable performance in temperature ranges from -55 to +15 C.. Intermateability Glenair s VG 9534 Reverse Bayonet Power and Signal Connector is a reverse bayonet coupling version of the familiar threaded coupling MIL-DTL Insert arrangements mimic the 5015 family of confi gurations, including a modicum of supported contact sizes, connector types and arrangements. Glenair s VG 9534 Connector is interchangeable and intermateable with the wide range of industrystandard reverse bayonet connectors designed around MIL-DTL-5015 and/or qualifi ed to VG Fast, Easy Bayonet Coupling: 1/4 Turn Environmental and Non-Environmental Versions All Shell Styles: Plug, Square Flange, Jam-Nut, etc. High Shock and Vibration Resistance Contact Sizes from #16 to #0 in more than 63 Insert Arrangements Audible and Visual Coupling Indicators Keyed Polarization Crimp Contacts Intermateable with Glenair ITS Series 1

4 Introduction Bayonet-Lock Assemblies Applications Glenair s qualifi ed reverse bayonet-lock connector series is based on the MIL-DTL-5015 standard, and shares many of the same insert arrangements, shell dimensions, supported contacts and electrical performance ratings as MIL-DTL-5015 and Glenair s commercial equivalent product line, the Series ITS. The 3-point bayonet coupling mechanism provides easy mating and positive locking resistance to vibration, shock, and other connector decoupling forces in general duty and environmental interconnect systems such as railway cars, locomotives, industrial controls, factory robotics, military vehicles and other general electronic applications. Component Materials connectors are available in aluminum alloy and are supplied standard with an olive green cadmium fi nish IAW QQ-P-416. Supplied crimp contacts are silver plated copper alloy. Insulators are high insulation synthetic rubber: -55 C to +15 C. EMI and Environmental Applications Series connectors are perfectly suited for use in rugged applications where EEC compliance directives for electromagnetic compatibility is required. A complete range of EMI shield termination accessories are available for both overall as well as individual wire shields. Equipped with the appropriate backshells and environmental sealing, the connectors are submersible for 48 hours up to a depth of two meters coupled. Connector Accessories Many of the connectors come already paired with selected backshell accessories for most application requirements. See the accessory descriptions on the opposite page for more information. A full range of additional connector accessories including dust caps and EMI gaskets are also available. Please contact the factory for additional information or any of our worldwide sales and engineering facilities. Glenair s website, also has complete information on these products, as well as other ruggedized power and signal connectors.

5 Bayonet-Lock Assemblies Available Components Introduction offers a simplifi ed ordering and part number format that combines the fi ve standard connector shell styles with the most popular backshells and connector accessories. Available connector shell styles, backshell types and accessories include: Connector Shell Styles Front Panel Mount Square Flange Receptacle with Accessory Threads Rear Box Mount Square Flange Receptacle with No Accessory Threads Rear Box Mount Square Flange Through Bulkhead Receptacle Straight and 90 Plug Connector with Accessory Threads In-Line Receptacle Integrated Backshell Types Type D, E, F, J1 and J: Basic backshell with cable clamp, bushing and wire sealing grommet. Types E1, K, H, and L: Backshell for the termination of fl exible wire protection conduit. Includes wire sealing grommet. Types G, T, U1 and U Simple Heat-Shrink Boot termination backshell. Includes wire sealing grommet. Types M, N1, N, R1, S1 and S EMI/RFI shield termination backshell with external lip for the attachment of for heat shrink boots. Includes wire sealing grommet. Accessories Plug and receptacle protective covers with various lanyard styles for panel attachment Plug and receptacle covers with various lanyard styles for cable attachment Conductive and non-conductive gaskets for panel mount connectors Dummy stowage receptacles Cable clamps and Neoprene bushing 3

6 Introduction Bayonet-Lock General Duty Crimp Contact Connector Cross Reference The Glenair reverse bayonet-lock connector series features a 3 point bayonet coupling mating interface with stainless steel coupling pins for advanced durability. Resilient closed entry inserts provide outstanding dielectric performance and environmental protection. Individual wire sealing grommets elevate the environmental protection rating to IP67. Conductive metal shells and plating provide a reliable ground plane for EMI applications when connectors are combined with appropriate shield termination backshells. Ground springs are also available in selected plug versions to further enhance EMC. Shells are keyed with three total alternate key positions. consists of: 15 styles of connectors/accessory assemblies 10 shell sizes 6 contact Sizes: #16, #1, #8, #4 and #0 in standard AWG. #10, #15, #5, #100-60, #160, and #500 in metric. 63 insert Arrangements with 1 to 61 contacts Connector Cross Reference Standard contacts: Crimp 5 Available alternate insert rotations Glenair Series ITS The Glenair Series ITS connector family is the company s commercial equivalent for the VG qualifi ed products presented in this catalog. Series ITS offers a much broader range of connector and backshell assemblies as well as additional plating options, fi re-resistant inserts, optional solder-cup contacts and other variations. Customers are advised to select versions of this reverse-bayonet connector series when qualifi cation to is a requirement. For non-vg applications, customers will appreciate the broader range of options available in the Series ITS. Accessory Cross Reference VG9534 Accessories Glenair Series ITS ITB 06T ITB 0T KB KR B 0D ITS 05 KK IT 3057 KT IT 340 DA-1 IT DA- IT S DH-1 IT DH- IT S A B1 B C1 C D E E1 K F G T H L J1 J M N1 N R1 S1 S U1 U ITB 410 A ITB 4103 A ITB 4103 AFP ITB 410 PP ITS 410 PPFP ITS 4106 FV ITS 4108 F ITS 4108 R ITS G 4108 R ITB 4101 FV ITS 4106 GR ITS G 4106 GR ITS 4106 R ITS G 4106 R ITB FV ITB FP FV ITS G 4106 SP ITB SP ITB SPFP N.A. N.A. N.A. ITB GR ITB GR FP 4

7 Bayonet-Lock Crimp Contact Connector Technical Data Introduction Metric AWG Contact Information Rated Current at 0 C. Contact Resistance MM Wire Size AWG A 1.0MΩ S S A 6.0MΩ A A 3.0MΩ A 1.0MΩ A 0.5MΩ A 0.MΩ 0 0 Service Rating Rated Current (Amp) Class Minimum Contact Spacing Test Voltage Vac RMS mm 1050 V 1.1 mm 1600 V 3.8 mm 500 V mm 3000 V Ambient Temperature C Insulation Resistance: 5 x 10 3 MΩ Shield Attenuation For Connector Styles K, L, M, R1 and T Attenuation (db) Frequency (MHz) 5

8 Introduction Bayonet-Lock General Duty Crimp Contact (MIL-C-5015 Type) Master How to Order Contact Arrangement 1 - Standard AWG Contacts (Omit for Metric) A 3-6 S 1 N Basic Part Number P - Pin contacts S - Socket contacts P/S - For Style C1 and C Bulkhead Feed-Thru Alternate Insert Positions N - X - Y Connector Style A - Front Panel Mount Square Flange Receptacle No Accessory Threads B1 - Rear Panel Mount Square Flange Receptacle Threaded Holes B - Rear Panel Mount Square Flange Receptacle Thru Holes CI - Bulkhead Feed-Thru Receptacle with Threaded Holes C - Bulkhead Feed-Thru Receptacle with Thru Holes D - Straight Plug with Cable Clamp and Bushing E - 90 Plug with Cable Clamp and Bushing E1-90 Plug without Clamp and Bushing K - 90 Plug with Grounding Fingers without Cable Clamp and Bushing F - In-Line Receptacle with Cable Clamp and Bushing G - Straight Plug with Shrink Boot Adapter T - Straight Plug with Shrink Boot Adapter and Grounding Fingers H - Straight Plug without Cable Clamp and Bushing L - Straight Plug with Grounding Fingers without Cable Clamp and Bushing J1 - Wall Mount Receptacle with Cable Clamp, Bushing and Threaded Holes J - Wall Mount Receptacle with Cable Clamp, Bushing and Thru Holes M - Straight Plug with EMI Shrink boot Backshell and Grounding Fingers N1 - Wall Mount Receptacle with EMI Shrink boot Backshell & Threaded Holes N - Wall Mount Receptacle with EMI Shrink boot Backshell & Thru Holes R1 - Straight Plug for use with VG9518 Wires EMI/Shrink boot Backshell S1 - Wall Mount Connector for VG9518 Wires EMI/Boot Backshell; Threaded S - Wall Mount Connector for VG9518 Wires EMI/Boot Backshell; Thru Holes U1 - Wall Mount Connector Shrink boot Backshell; Threaded Holes U - Wall Mount Connector Shrink boot Backshell; Thru Holes 6

9 Glenair Series ITS Commercial Equivalent Product Line Introduction Connector/Backshell Class A - Non-Environmental GR, SP - Environmental (Includes Wire Sealing Grommet) FV, F, R, RS - Environmental (Includes Wire Sealing Grommet and Compression Ring) Shell Size and Insert Arrangement Accessory Description Code Reverse Bayonet Coupling Connector ITB for the Receptacle Contact Gender P - Pin S - Socket Mod Code Option ITS G A FK 0-7 P Y N0 CRA XXX Plug Grounding Fingers Omit for Standard Contact Type 41 - Crimp Material Option FK - Stainless Steel Passivate MB - Marine Bronze Omit - For Standard Aluminum Alternate Insert Rotation Omit for Normal CRA - AWG Contact CRM - Metric Contacts Connector Shell Styles 00 - Front Panel Mount Square Flange Receptacle with Accessory Threads 01 - In-Line Cylindrical Receptacle with Accessory Threads 0 - Front Panel Mount Square Flange Receptacle No Accessory Threads 03 - Rear Panel Mount Square Flange Receptacle No Accessory Threads Rear Panel Mount Square Flange Receptacle with Accessory Threads Rear Panel Mount Square Flange Receptacle with 90 Backshell 05 - Dummy Receptacle 06 - Straight Cylindrical Plug Connector with Accessory Threads 07 - Rear Panel Mount Jam Nut Receptacle No Accessory Threads Rear Panel Mount Jam Nut Receptacle with Accessory Threads Rear Panel Mount Jam Nut Receptacle with 90 Backshell 08 - Cylindrical Plug Connector with 90 Backshell 6 - Square Flange Panel Mount Plug TB - Solid Contact Bulkhead Feed Through 7

10 Introduction Pin Contact Arrangements Contact Arrangements Service Rating PIN CONTACTS Contact Size Metric Type AWG Type A 15S S-16 10SL SL - 4 1SA S S S S S S - 4* * A * * A A B * Consult factory VG Qualified 8

11 Contact Arrangements and Sealing Plugs Introduction Contact Arrangements Service Rating PIN CONTACTS Contact Size Metric Type AWG Type A 15S S A A A * Consult factory VG Qualified SEALING PLUGS Part Number SEALING PLUG DIMENSIONS Contact Size Metric AWG ±0.1 ±0. ±0.1 ±0.3 Color B Red B16 15S Blue B1 5A Yellow B White B Green B Black 9

12 Introduction Contact Arrangements Front View of Pin Insert 1 CONTACT ARRANGEMENT : CONTACT SIZE : Metric AWG SERVICE RATING : D3 CONTACTS ARRANGEMENT : 10SL-4 16S-4 16-A CONTACT SIZE : Metric 15S 16S-4 15S pin 5A / socket 5 AWG 16 4 SERVICE RATING : D D CONTACTS ARRANGEMENT : CONTACT SIZE : CONTACTS SERVICE RATING : ARRANGEMENT : CONTACT SIZE : SERVICE RATING : Metric AWG D A CONTACTS ARRANGEMENT : 10SL S CONTACT SIZE : Metric 15S 15S / 15, 1 / AWG 0 8 SERVICE RATING : A D 3 3 CONTACTS ARRANGEMENT : CONTACT SIZE : ARRANGEMENT : CONTACT SERVICESIZE RATING : : Metric AWG SERVICE RATING : / ; /15 1/8, ; /16 /16 A C B A Contact Size Metric Type AWG Type A 15S S-16 10

13 Contact Arrangements Front View of Pin Insert Introduction A 4 CONTACTS D B C 16-9 ARRANGEMENT : 16-9 / , /16 - -B 36-5 CONTACT SIZE : Metric /5 A3 / ; 5 /15, 1 / SERVICE RATING : AWG * 1/8, 18-13* 3/1 A 1/60 ; 3/5 1/8 ; 3/1 4 CONTACTS ARRANGEMENT : CONTACT SIZE : D C A B ARRANGEMENT SERVICE RATING : : CONTACT SIZE : Metric AWG SERVICE RATING : D D S S I 1 1SA-10 15S 1 5 CONTACTS 14S-5 ARRANGEMENT : CONTACT SIZE : Metric 5 3 / 15, / / 5, / 500 AWG 3 / 1, / 4 3 / 1, / 0 SERVICE RATING : 3 A = 4 ; Balance=3 - E = 3 16 I14S-5 15S 1 Contact Size Metric Type AWG Type A 15S S-16 11

14 Introduction Contact Arrangements Front View of Pin Insert 6 CONTACTS ARRANGEMENT : 14S * 5/5 ; 1/15 AWG 3 / 16, 3 SERVICE RATING : 1 1 3D=4 ; Balance= 6 CONTACTS ARRANGEMENT : 36-6 CONTACT SIZE : Metric AWG 4 / 4, / 0 SERVICE RATING : 0-3/60 ; 3/ /500 ; 3/5 3/0 ; 3/ /160 ; 3/15 3/4 ; 3/ CONTACTS ARRANGEMENT : 16S CONTACT SIZE : Metric 15S /1 /5 5 /; 5/15, 5/16, / AWG I SERVICE RATING : A 89 CONTACTS ARRANGEMENT : CONTACT SIZE : SERVICE RATING : Metric AWG -3 5 H=4 ; Balance= Contact Size Metric Type AWG Type A 15S S-16 1

15 Contact Arrangements Front View of Pin Insert Introduction 9 CONTACTS ARRANGEMENT : 0-A CONTACT SIZE : Metric 5 8 / 15, 1 / 60 6 / 5, 3 / 100 AWG 6 / 1, 3 / 8 4 / 16, / 1, / 4, 1 / 0 SERVICE RATING : AJ=3 - H ; Balance=1 = 1 ; J = 3 AJ=3 - H ; Balance= = ; J = CONTACTS ARRANGEMENT : CONTACT SIZE : SERVICE RATING : Metric AWG 0-16 /5 ; 7/ /5 ; 6/ /160 ; 5/15 4/4 ; 5/16 10 CONTACTS 11 CONTACTS ARRANGEMENT : 18-1 CONTACT SIZE : Metric 15 AWG SERVICE RATING : A, D, E, H, I, J = 1 ; B, C, F, G = ARRANGEMENT : CONTACT SIZE : SERVICE RATING : Metric AWG 4-0 /5 ; 9/ CONTACTS 17 CONTACTS ARRANGEMENT : CONTACT SIZE : SERVICE RATING : Metric AWG / 15, 10 / ARRANGEMENT : CONTACT SIZE : SERVICE RATING : Metric AWG Contact Size Metric Type AWG Type A 15S S-16 13

16 Introduction Contact Arrangements Front View of Pin Insert 19 CONTACTS ARRANGEMENT : 0-A48-14 CONTACT SIZE : Metric AWG SERVICE RATING : 1 CONTACTS 3 CONTACTS ARRANGEMENT : CONTACT SIZE : Metric 18 / 15, 4 / 5 16 / 15, / 5, 3 / 60, / 160 SERVICE RATING : AWG 16 / 16, / 1, 3 / 8, / 4 4 CONTACTS 6 CONTACTS ARRANGEMENT : 4-8 CONTACT SIZE : Metric 4 / 15 AWG SERVICE RATING : 1 ARRANGEMENT : CONTACT SIZE : SERVICE RATING : Metric AWG CONTACTS 8-A63 19 / 15, 9 / 5 E= E = ; Balance=1 ; Bal. = 1 Contact Size Metric Type AWG Type A 15S S-16 14

17 Introduction Contact Arrangements Front View of Pin Insert 35 CONTACTS ARRANGEMENT : CONTACT SIZE : 37 CONTACTS Metric AWG SERVICE RATING : / 15, 7 / A, A,B, B,H, H J=1, J =;1Balance= ; Bal. = 48 CONTACTS ARRANGEMENT : CONTACT SIZE : 61 55CONTACTS CONTACTS Metric AWG SERVICE RATING : ARRANGEMENT : CONTACT SIZE : SERVICE RATING : Metric AWG 3-A55 3-A / 10, 0 / CONTACTS 3-A69 41 / 10, 0 / 15 1 Not for connectors style C1 and C Glenair, Inc. 160 Contact Size Metric Type A 15S U.S. CAGE Code AWG Type S-16 15

18 Introduction Pin Contacts Pin Contact L3 D3 D4 D5 D6 L4 VG Part Number Part Number Color Code PIN CONTACTS Contact Size Metric AWG D D D D ±0. ±0.15 P P P P-001 Blue P15S SP 1.75 P15S SP-001 Blue 15S 16S P15S SP-00 Red 1.0 P P 1.75 P P-001 Blue P P-00 Red 1.0 P P P P-001 Black P5A AP P P Yellow P P-001 Green P P P P P P P P-001 Brown P P P P P P-001 White P P-00 Grey 9.10 P P L3 ±0.1 L4 Min. 16

19 Socket Contacts Introduction Socket Contact L3 D3 D4 D5 D6 L4 VG Part Number Part Number Color Code SOCKET CONTACTS Contact Size Metric AWG D D D D ±0. ±0.15 S S S S-001 Blue S15S SS 1.75 S15S SS-001 Blue 15S 16S S15S SS-00 Red 1.0 S S 1.75 S S-001 Blue S S-00 Red 1.0 S S S S-001 Black S S Yellow S S-001 Green S S S S S S S S-001 Brown S S S S S S-001 White S S-00 Grey 9.10 S S L3 ±0.1 L4 Min. 17

20 Introduction Contact Arrangements and Alternate Key Position Contact Arrangements Table Contact Degrees Contact Degrees Tolerance Arrangments W X Y Z Arrangments W X Y Z Tolerance 10SL ± 10SL ± 1SA ± 1 30' 14S ± ± 14S ± ± 14S ± -B ± 1 30' 14S ± ± 1 30' 16S ± ± 1 30' 16S - 4 * ± ± 1 30' 16-7 * ± ± 1 30' ± ± 1 30' ± ± 16 - A ± ± ± 1 30' ± ± ± ± 1 30' ± ± 18-9 * ± ± 1 30' ± ± 1 30' * ± ± 1 30' A ± 1 30' ± ± ± ± ± ± ± ± ± ± ± ± 3 - A ± ± 3 - A ± 1 30' 0 - A ± ± 1 30' 0 - A ± ± 1 30' ± 1 30' ± 1 30' ± 1 30' ± 1 30' ± * Consult the Factory Normal position Alternate position Alternate position with socket contacts with pin contacts 18

21 Bayonet Lock Assemblies imum Panel Thickness and Panel Cut-Out Mounting Data imum Panel Thickness Panel Thickness thickness for for Type type A 00, 0 connectors (Used used for Rear for Mounting) rear mounting Guscio 16S 14S Shell size 10SL A 3,70 3,70 3,70 3,70 3,70 3,70 5,5 5,5 6,10 6,10 6,00 Spessore pannello per connettori tipo 0PP, 03, 030, e 038 (con fori filettati) Panel Thickness thickness for for Type type B, 0PP, C, J, N, 03, S, 030 U and 038 connectors (Used for Rear (with Mounting) threaded holes) Guscio 16S 14S Shell size 10SL A 7,0 7,0 7,0 7,50 7,50 7,50 7,50 7,50 7,50 7,50 7,50 qr OC = OT = Dimensioni di foratura per connettori tipo 00, 0 e 6 (montaggio fronte pannello) Panel Cut-Out cutout for for type Type 00, A 0, 6 connectors (Front Panel (front Mounting) panel mounting) Guscio 16S 14S Shell size 10SL ØC 17,0 0,0 3,0 6,5 30,0 33,0 36,0 4,0 48,5 55,0 61,0 R ±0,1 18, 3,0 4,6 7,0 9,4 31,8 34,9 39,7 44,5 49, 55,5 ØT 3,4 3,4 3,4 3,4 3,4 3,4 3,9 3,9 4,5 4,5 4,5 Dimensioni di foratura per connettori tipo 0 PP, 03 e 030 (montaggio retro pannello) Panel Cut-Out cutout for for type Type 0PP, B, C, J, 03, N, 030 S, U connectors (rear (Rear panel Panel mounting) Mounting) Guscio 16S 14S Shell size 10SL ØC 19,1 5,5 8,3 31,7 35,0 38,3 41,8 47,6 54,3 60,5 66,4 R ±0,1 18, 3,0 4,6 7,0 9,4 31,8 34,9 39,7 44,5 49, 55,5 ØT 4,5 4,5 4,5 4,5 4,5 4,5 4,5 5,5 5,5 5,5 5,5 19

22 A Front Panel Wall Mount Receptacle Basic Part Number Contact Arrangement 1 - Standard AWG Contacts (Omit for Metric) A 3-6 S 1 N A - Front Panel Mount Receptacle P - Pin contacts S - Socket contacts Alternate Insert Positions N - X - Y L3 E ØA L4 APPLICATION NOTES 1. Front panel mount square fl ange receptacle no accessory threads. Through mounting holes.. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IAW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 C to +15 C) IAW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. All dimensions are metric unless otherwise noted. 0

23 A Front Panel Wall Mount Receptacle Shell Size ØA H13 DIMENSIONS E ±0.1 ± L3 ±0. L4 ±0.3 Weight gr. 10 SL S S SHELLS Aluminum Alloy IAW QQ-A-591 Shells MATERIALS INSERTS (Temperature Range) High Insulation Synthetic Rubber -55 C/+15 C CRIMP CONTACTS Copper Alloy with Silver Plating Over Nickel STANDARD FINISH (For QQ-A-591 Aluminum Shells) Cadmium with Olive Requirements Drab Passivation IAW QQ-P-416 Thermal Shock -55 C + 15 C Salt Spray After Thermal Shock 500 hour Electrical Conductivity Very Good Abrasion Resistance Very Good 1

24 B1 and B Rear Panel Wall Mount Receptacle with Threaded (B1) and Thru-Holes (B) Basic Part Number Contact Arrangement 1 - Standard AWG Contacts (Omit for Metric) B1 3-6 S 1 N Rear Panel Mount Receptacle with... B1 - Threaded Holes B - Thru Holes P - Pin contacts S - Socket contacts Alternate Insert Positions N - X - Y L3 E ØA L4 B APPLICATION NOTES 1. Rear panel mount square fl ange receptacle no accessory threads. Threaded or through mounting holes.. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IAW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 C to +15 C) IAW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. All dimensions are metric unless otherwise noted.

25 B1 and B Rear Panel Wall Mount Receptacle with Threaded (B1) and Thru-Holes (B) Shell Size ØA B1 DIMENSIONS B H13 E ±0.1 ± L3 ±0. L4 ±0.3 Weight gr. 10 SL M S M S M M M M M M M M M SHELLS Aluminum Alloy IAW QQ-A-591 Shells MATERIALS INSERTS (Temperature Range) High Insulation Synthetic Rubber -55 C/+15 C CRIMP CONTACTS Copper Alloy with Silver Plating Over Nickel STANDARD FINISH (For QQ-A-591 Aluminum Shells) Cadmium with Olive Requirements Drab Passivation IAW QQ-P-416 Thermal Shock -55 C + 15 C Salt Spray After Thermal Shock 500 hour Electrical Conductivity Very Good Abrasion Resistance Very Good 3

26 C1 and C Bulkhead Feed-Thru Receptacle with Threaded (C1) and Thru-Holes (C) Basic Part Number Contact Arrangement 1 - Standard AWG Contacts (Omit for Metric) C1 3-6 P/S 1 N Bulkhead Feed-Thru with... C1 - Threaded Holes C - Thru Holes P/S - Pin/Socket Solid Contacts Alternate Insert Positions N - X - Y L3 E O-ring ØA L4 C APPLICATION NOTES 1. Bulkhead feed-thru receptacle with threaded or through mounting holes.. Solid contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IAW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 C to +15 C) IAW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. All dimensions are metric unless otherwise noted. 4

27 C1 and C Bulkhead Feed-Thru Receptacle with Threaded (C1) and Thru-Holes (C) Shell Size ØA B1 B H13 DIMENSIONS E ±0.1 ± L3 ±0. L4 ±0.3 Weight gr. 10 SL 18. M S 4.6 M S 7.4 M M M M M M M M M SHELLS Aluminum Alloy IAW QQ-A-591 Shells MATERIALS INSERTS (Temperature Range) High Insulation Synthetic Rubber -55 C/+15 C CRIMP CONTACTS Copper Alloy with Silver Plating Over Nickel STANDARD FINISH (For QQ-A-591 Aluminum Shells) Cadmium with Olive Requirements Drab Passivation IAW QQ-P-416 Thermal Shock -55 C + 15 C Salt Spray After Thermal Shock 500 hour Electrical Conductivity Very Good Abrasion Resistance Very Good 5

28 D Straight Plug with Cable Clamp, Bushing and Wire Sealing Grommet Basic Part Number Contact Arrangement 1 - Standard AWG Contacts (Omit for Metric) D 3-6 P 1 N D - Straight Plug with Cable Clamp and Bushing P - Pin contacts S - Socket contacts Alternate Insert Positions N - X - Y L3 APPLICATION NOTES 1. Straight plug connector complete with wire sealing grommet, cable clamp and bushing.. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IAW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 C to +15 C) IAW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. All dimensions are metric unless otherwise noted. 6

29 D Straight Plug with Cable Clamp, Bushing and Wire Sealing Grommet Shell Size DIMENSIONS L3 Weight gr. 10 SL S S SHELLS Aluminum Alloy IAW QQ-A-591 Shells Stainless Steel Coupling Pins Stainless Steel Spring MATERIALS INSERTS (Temperature Range) High Insulation Synthetic Rubber -55 C/+15 C CRIMP CONTACTS Copper Alloy with Silver Plating Over Nickel STANDARD FINISH (For QQ-A-591 Aluminum Shells) Cadmium with Olive Requirements Drab Passivation IAW QQ-P-416 Thermal Shock -55 C + 15 C Salt Spray After Thermal Shock 500 hour Electrical Conductivity Very Good Abrasion Resistance Very Good 7

30 E 90 Plug with Cable Clamp, Bushing and Wire Sealing Grommet Basic Part Number Contact Arrangement 1 - Standard AWG Contacts (Omit for Metric) E 3-6 P 1 N E - 90 Plug with Cable Clamp and Bushing P - Pin contacts S - Socket contacts Alternate Insert Positions N - X - Y L3 L4 APPLICATION NOTES Plug connector with wire sealing grommet, cable clamp and bushing.. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IAW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 C to +15 C) IAW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. All dimensions are metric unless otherwise noted. 8

31 E 90 Plug with Cable Clamp, Bushing and Wire Sealing Grommet Shell Size DIMENSIONS L3 L4 Weight gr. 10 SL S S SHELLS Aluminum Alloy IAW QQ-A-591 Shells Stainless Steel Coupling Pins Stainless Steel Spring MATERIALS INSERTS (Temperature Range) High Insulation Synthetic Rubber -55 C/+15 C CRIMP CONTACTS Copper Alloy with Silver Plating Over Nickel STANDARD FINISH (For QQ-A-591 Aluminum Shells) Cadmium with Olive Requirements Drab Passivation IAW QQ-P-416 Thermal Shock -55 C + 15 C Salt Spray After Thermal Shock 500 hour Electrical Conductivity Very Good Abrasion Resistance Very Good 9

32 E1 and K 90 Plug with Conduit Adapter (E1) and Grounding Fingers (K) Basic Part Number Contact Arrangement 1 - Standard AWG Contacts (Omit for Metric) E1 3-6 P 1 N E1-90 Plug without Grounding Fingers, Cable Clamp and Bushing. K - 90 Plug with Grounding Fingers without Cable Clamp and Bushing. P - Pin contacts S - Socket contacts Alternate Insert Positions N - X - Y L5 D3 APPLICATION NOTES Plug connector without cable clamp and bushing.. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IAW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 C to +15 C) IAW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. All dimensions are metric unless otherwise noted. 30

33 E1 and K 90 Plug with Conduit Adapter (E1) and Grounding Fingers (K) Shell Size D3 DIMENSIONS L5 Min Weight gr. 10 SL UNEF S UNEF S UNEF UNEF UNEF NEF NEF NEF NEF NS NS SHELLS Aluminum Alloy IAW QQ-A-591 Shells Stainless Steel Coupling Pins Stainless Steel Spring Copper Alloy Grounding Finger MATERIALS INSERTS (Temperature Range) High Insulation Synthetic Rubber -55 C/+15 C CRIMP CONTACTS Copper Alloy with Silver Plating Over Nickel STANDARD FINISH (For QQ-A-591 Aluminum Shells) Cadmium with Olive Requirements Drab Passivation IAW QQ-P-416 Thermal Shock -55 C + 15 C Salt Spray After Thermal Shock 500 hour Electrical Conductivity Very Good Abrasion Resistance Very Good 31

34 F In Line Receptacle with Cable Clamp, Bushing and Wire Sealing Grommet Basic Part Number Contact Arrangement 1 - Standard AWG Contacts (Omit for Metric) F 3-6 S 1 N F - In-Line Receptacle with Cable Clamp and Bushing P - Pin contacts S - Socket contacts Alternate Insert Positions N - X - Y L3 ØA L7 L5 L4 APPLICATION NOTES Plug connector without cable clamp and bushing.. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IAW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 C to +15 C) IAW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. All dimensions are metric unless otherwise noted. 3

35 F In Line Receptacle with Cable Clamp, Bushing and Wire Sealing Grommet Shell Size ØA DIMENSIONS ±0.4-0 L3 ±0. L4 L5 ±0. L7 Weight gr. 10 SL S S SHELLS Aluminum Alloy IAW QQ-A-591 Shells Stainless Steel Coupling Pins Stainless Steel Spring MATERIALS INSERTS (Temperature Range) High Insulation Synthetic Rubber -55 C/+15 C CRIMP CONTACTS Copper Alloy with Silver Plating Over Nickel STANDARD FINISH (For QQ-A-591 Aluminum Shells) Cadmium with Olive Requirements Drab Passivation IAW QQ-P-416 Thermal Shock -55 C + 15 C Salt Spray After Thermal Shock 500 hour Electrical Conductivity Very Good Abrasion Resistance Very Good 33

36 G and T Straight Plug with Heat Shrink Boot Adapter (G), Grounding Fingers (T), and Wire Sealing Grommet Basic Part Number Contact Arrangement 1 - Standard AWG Contacts (Omit for Metric) G 3-6 P 1 N G - Straight Plug with Heat Shrink Boot Adapter T - Add Grounding Fingers P - Pin contacts S - Socket contacts Alternate Insert Positions N - X - Y L5 D6 D5 D4 D3 K 3.5 ±0. APPLICATION NOTES 1. Straight plug connector with wire sealing grommet and shrink boot adapter.. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IAW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 C to +15 C) IAW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. All dimensions are metric unless otherwise noted. 34

37 G and T Straight Plug with Heat Shrink Boot Adapter (G), Grounding Fingers (T), and Wire Sealing Grommet Shell Size D3 ±0. D4 ±0. DIMENSIONS D5 D6 Min K Key L5 ±0.5 Weight gr. 10 SL S S , SHELLS Aluminum Alloy IAW QQ-A-591 Shells Stainless Steel Coupling Pins Stainless Steel Spring MATERIALS INSERTS (Temperature Range) High Insulation Synthetic Rubber -55 C/+15 C CRIMP CONTACTS Copper Alloy with Silver Plating Over Nickel STANDARD FINISH (For QQ-A-591 Aluminum Shells) Cadmium with Olive Requirements Drab Passivation IAW QQ-P-416 Thermal Shock -55 C + 15 C Salt Spray After Thermal Shock 500 hour Electrical Conductivity Very Good Abrasion Resistance Very Good 35

38 H and L Straight Plug with Conduit Adapter (H) and Grounding Fingers (L) Basic Part Number Contact Arrangement 1 - Standard AWG Contacts (Omit for Metric) H 3-6 P 1 N H - Includes Wire Sealing Grommet; without Grounding Fingers L - With Grounding Fingers and Wire Sealing Grommet P - Pin contacts S - Socket contacts Alternate Insert Positions N - X - Y D3 APPLICATION NOTES 1. Straight Plug connector.. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IAW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 C to +15 C) IAW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. All dimensions are metric unless otherwise noted. 36

39 H and L Straight Plug with Conduit Adapter (H) and Grounding Fingers (L) Shell Size Min DIMENSIONS D3 Min Weight gr. 10 SL UNEF S UNEF S UNEF UNEF UNEF NEF NEF NEF NEF NS NS SHELLS Aluminum Alloy IAW QQ-A-591 Shells Stainless Steel Coupling Pins Stainless Steel Spring MATERIALS INSERTS (Temperature Range) High Insulation Synthetic Rubber -55 C/+15 C CRIMP CONTACTS Copper Alloy with Silver Plating Over Nickel STANDARD FINISH (For QQ-A-591 Aluminum Shells) Cadmium with Olive Requirements Drab Passivation IAW QQ-P-416 Thermal Shock -55 C + 15 C Salt Spray After Thermal Shock 500 hour Electrical Conductivity Very Good Abrasion Resistance Very Good 37

40 J1 and J Wall Mount Receptacle with Cable Clamp, Bushing and Wire Sealing Grommet With Threaded (J1) and Thru-Holes (J) Basic Part Number Contact Arrangement 1 - Standard AWG Contacts (Omit for Metric) J1 3-6 S 1 N Wall Mount Receptacle with Cable Clamp and Bushing and... J1 - Threaded Holes J - Thru-Holes P - Pin contacts S - Socket contacts Alternate Insert Positions N - X - Y L3 E ØA D3 L6 L4 L5 J APPLICATION NOTES 1. Rear mount receptacle with wire sealing grommet, cable clamp and bushing.. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IAW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 C to +15 C) IAW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. All dimensions are metric unless otherwise noted. 38

41 J1 and J Wall Mount Receptacle with Cable Clamp, Bushing and Wire Sealing Grommet With Threaded (J1) and Thru-Holes (J) Shell Size ØA J1 J H13 D3 DIMENSIONS E ±0.1 ± L3 ±0. L4 ±0.3 L5 L6 10 SL 18. M S 4.6 M S 7.4 M M M M M M M M M Weight gr. SHELLS Aluminum Alloy IAW QQ-A-591 Shells MATERIALS INSERTS (Temperature Range) High Insulation Synthetic Rubber -55 C/+15 C CRIMP CONTACTS Copper Alloy with Silver Plating Over Nickel STANDARD FINISH (For QQ-A-591 Aluminum Shells) Cadmium with Olive Requirements Drab Passivation IAW QQ-P-416 Thermal Shock -55 C + 15 C Salt Spray After Thermal Shock 500 hour Electrical Conductivity Very Good Abrasion Resistance Very Good 39

42 M Straight Plug with EMI/RFI Backshell, Grounding Fingers, Wire Sealing Grommet and Heat Shrink Boot Lip Basic Part Number Contact Arrangement 1 - Standard AWG Contacts (Omit for Metric) M 3-6 P 1 N M - Straight Plug with EMI Backshell/Shrink Boot Adapter and Grounding Fingers P - Pin contacts S - Socket contacts Alternate Insert Positions N - X - Y 1 L6 L5 D4 D6 D5 D7 D3 K 3.5 ±0. L7 APPLICATION NOTES 1. Straight plug connector with EMI backshell and boot adapter.. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IAW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 C to +15 C) IAW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. All dimensions are metric unless otherwise noted. 40

43 M Straight Plug with Grounding Fingers, EMI/RFI Backshell, Wire Sealing Grommet and Heat Shrink Boot Lip Shell Size D3 D4 Min D5 D6 DIMENSIONS D7 ±0.5 K Key L5 Min L L7 +1 Weight gr. 10 SL M S M S M M M M M M , M M M SHELLS Aluminum Alloy IAW QQ-A-591 Shells Stainless Steel Coupling Pins Stainless Steel Spring MATERIALS INSERTS (Temperature Range) High Insulation Synthetic Rubber -55 C/+15 C CRIMP CONTACTS Copper Alloy with Silver Plating Over Nickel STANDARD FINISH (For QQ-A-591 Aluminum Shells) Cadmium with Olive Requirements Drab Passivation IAW QQ-P-416 Thermal Shock -55 C + 15 C Salt Spray After Thermal Shock 500 hour Electrical Conductivity Very Good Abrasion Resistance Very Good 41

44 N1 and N Wall Mount Receptacle with EMI/RFI Backshell and Heat Shrink Boot Lip, Sealing Grommet and Grounding Fingers Basic Part Number Contact Arrangement 1 - Standard AWG Contacts (Omit for Metric) N1 3-6 S 1 N Rear Mount Receptacle with EMI Backshell/Shrink Boot Adapter and... N1 - Threaded Holes N - Thru-Holes P - Pin contacts S - Socket contacts Alternate Insert Positions N - X - Y L3 1 L5 L6 E ØA D4 D6 D5 D7 D3 K 3.5 ±0. L7 L4 N APPLICATION NOTES 1. Rear wall mount receptacle with EMI backshell and shrink boot adapter.. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IAW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 C to +15 C) IAW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. All dimensions are metric unless otherwise noted. 4

45 N1 and N Wall Mount Receptacle with EMI/RFI Backshell and Heat Shrink Boot Lip, Sealing Grommet and Grounding Fingers Shell Size ØA N1 N H13 DIMENSIONS E ± L3 ±0. L4 ±0.3 Weight gr. 10 SL 18. M S 4.6 M S 7.4 M M M M M M M M M Please refer to M for dimensions D3, D4, D5, D6, D7, K, L5, L6 and L7. SHELLS Aluminum Alloy IAW QQ-A-591 Shells MATERIALS INSERTS (Temperature Range) High Insulation Synthetic Rubber -55 C/+15 C CRIMP CONTACTS Copper Alloy with Silver Plating Over Nickel STANDARD FINISH (For QQ-A-591 Aluminum Shells) Cadmium with Olive Requirements Drab Passivation IAW QQ-P-416 Thermal Shock -55 C + 15 C Salt Spray After Thermal Shock 500 hour Electrical Conductivity Very Good Abrasion Resistance Very Good 43

46 R1 Straight Plug with Grounding Fingers, EMI / RFI Backshell and Shrink Boot Adapter Basic Part Number Contact Arrangement 1 - Standard AWG Contacts (Omit for Metric) R1 3-6 P 1 N R1 - Straight Plug with EMI Backshell/ Shrink Boot Adapter and Grounding Fingers P - Pin contacts S - Socket contacts L6 Alternate Insert Positions N - X - Y L5 3.5 ±0. 1 ±0. D3 D4 D6 D5 D7 K 18 max APPLICATION NOTES 1. Straight plug connector with grounding fi nger EMI/RFI backshell and wire sealing grommet.. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IAW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 C to +15 C) IAW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. All dimensions are metric unless otherwise noted. 44

47 R1 Straight Plug with Grounding Fingers, EMI / RFI Backshell and Shrink Boot Adapter Shell Size Useable Inserts D D DIMENSIONS D5 D6 ±0.3 D7 ±0.3 K Key L5 L S 14S M0x S 16S M0x Mx A M7x M35x A M35x Weight gr. SHELLS Aluminum Alloy IAW QQ-A-591 Shells Stainless Steel Coupling Pins Stainless Steel Spring MATERIALS INSERTS (Temperature Range) High Insulation Synthetic Rubber -55 C/+15 C CRIMP CONTACTS Copper Alloy with Silver Plating Over Nickel STANDARD FINISH (For QQ-A-591 Aluminum Shells) Cadmium with Olive Requirements Drab Passivation IAW QQ-P-416 Thermal Shock -55 C + 15 C Salt Spray After Thermal Shock 500 hour Electrical Conductivity Very Good Abrasion Resistance Very Good 45

48 S1 and S Rear Wall Mount Receptacle with EMI / RFI Backshell, Dual-Lip Heat Shrink Boot Adapter Basic Part Number Contact Arrangement 1 - Standard AWG Contacts (Omit for Metric) S1 3-6 S 1 N Rear Wall Mount Receptacle with EMI Backshell/Shrink Boot Adapter S1 - Threaded Holes S - Thru-Holes P - Pin contacts S - Socket contacts L6 Alternate Insert Positions N - X - Y L3 L5 3.5 ±0. 1 ±0. E ØA D3 D4 D6 D5 D7 K 18 max L4 S APPLICATION NOTES 1. Rear wall mount receptacle with EMI backshell.. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IAW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 C to +15 C) IAW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. All dimensions are metric unless otherwise noted. 46

49 S1 and S Rear Wall Mount Receptacle with EMI / RFI Backshell, Dual-Lip Heat Shrink Boot Adapter Shell Size Useable Inserts ØA S1 DIMENSIONS S H13 E ± L3 ±0. L4 ±0.3 Weight gr. 14 S 14S M S 16S M M A M M A M Please refer to R1 for dimensions D3, D4, D5, D6, D7, K, l5, and l6. SHELLS Aluminum Alloy IAW QQ-A-591 Shells MATERIALS INSERTS (Temperature Range) High Insulation Synthetic Rubber -55 C/+15 C CRIMP CONTACTS Copper Alloy with Silver Plating Over Nickel STANDARD FINISH (For QQ-A-591 Aluminum Shells) Cadmium with Olive Requirements Drab Passivation IAW QQ-P-416 Thermal Shock -55 C + 15 C Salt Spray After Thermal Shock 500 hour Electrical Conductivity Very Good Abrasion Resistance Very Good 47

50 U1 and U Rear Wall Mount Receptacle with Heat Shrink Boot Adapter and Sealing Grommet Basic Part Number Contact Arrangement 1 - Standard AWG Contacts (Omit for Metric) U1 3-6 S 1 N Rear Wall Mount Receptacle with Heat Shrink Boot Adapter U1 - Threaded Holes U - Thru-Holes P - Pin contacts S - Socket contacts Alternate Insert Positions N - X - Y L3 L5 E ØA D6 D5 D4 D3 K 3.5 ±0. L4 U APPLICATION NOTES 1. Rear wall mount receptacle with heat shrink boot adapter.. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IAW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 C to +15 C) IAW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. All dimensions are metric unless otherwise noted. 48

51 U1 and U Rear Wall Mount Receptacle with Heat Shrink Boot Adapter and Sealing Grommet Shell Size ØA DIMENSIONS E B1 B ±0.1 H L3 ±0. L4 ±0.3 Weight gr. 10 SL 18. M S 4.6 M S 7.4 M M M M M M M M M Please refer to G for dimensions D3, D4, D5, D6, D7, K and L5. SHELLS Aluminum Alloy IAW QQ-A-591 Shells MATERIALS INSERTS (Temperature Range) High Insulation Synthetic Rubber -55 C/+15 C CRIMP CONTACTS Copper Alloy with Silver Plating Over Nickel STANDARD FINISH (For QQ-A-591 Aluminum Shells) Cadmium with Olive Requirements Drab Passivation IAW QQ-P-416 Thermal Shock -55 C + 15 C Salt Spray After Thermal Shock 500 hour Electrical Conductivity Very Good Abrasion Resistance Very Good 49

52 Accessories KB Plug Protective Cover With Stainless Steel Chain Shell size KB - 14 S Basic Part Number Bayonet Compatible Plug Cover with Stainless Steel Chain DIMENSIONS Connector Size Min Weight gr. 10 SL S S APPLICATION NOTES 1.. Metal protective cover for bayonet plug connectors with stainless steel chain. Standard materials confi guration consists of aluminum alloy with cadmium olive drab passivation IAW QQ-P Other types of front and rear connector accessories are available. See our website and/or contact the factory for complete information. 50

53 KC Plug Protective Cover With Polyamide Black Rope Accessories Shell size KC - 14 S Basic Part Number Rope Lanyard End Termination for Plug Cover Ø4 Connector Size DIMENSIONS Min Weight gr. = 5.5 ± SL S S APPLICATION NOTES 1.. Metal protective cover for bayonet plug connectors with polyamide black rope. Standard materials confi guration consists of aluminum alloy with cadmium olive drab passivation IAW QQ-P Other types of front and rear connector accessories are available. See our website and/or contact the factory for complete information. 51

54 Accessories KR Receptacle Protective Cover With Stainless Steel Chain Shell size KR - 14 S Basic Part Number Bayonet Compatible Receptacle Cover with Stainless Steel Chain DIMENSIONS Connector Size Min Weight gr. 10 SL S S APPLICATION NOTES 1.. Metal protective cover for bayonet receptacle connectors with stainless steel chain. Standard materials confi guration consists of aluminum alloy with cadmium olive drab passivation IAW QQ-P Other types of front and rear connector accessories are available. See our website and/or contact the factory for complete information. 5

55 KA Receptacle Protective Cover With Polyamide Black Rope Shell size KA - 14 S Basic Part Number Rope Lanyard End Termination for Receptacle Cover Ø4 DIMENSIONS Connector Size Min Weight gr ± SL S S APPLICATION NOTES 1.. Metal protective cover for bayonet receptacle connectors with polyamide black rope. Standard materials confi guration consists of aluminum alloy with cadmium olive drab passivation IAW QQ-P Other types of front and rear connector accessories are available. See our website and/or contact the factory for complete information. 53

56 Accessories B0D Dummy Plug Stowage Receptacle with Open Back for Front Panel Mount Shell size B0D - 14 S Basic Part Number Dummy Plug Stowage Receptacle with Open back for Front Panel Mount DUMMY STOWAGE RECEPTACLE L3 APPLICATION NOTES 1.. Dummy receptacle stowage fi tting protects the plug connector when not in use. Standard materials confi guration consists of aluminum alloy with cadmium olive drab passivation IAW QQ-P Other types of front and rear connector accessories are available. See our website and/or contact the factory for complete information. 54

57 B0D Dummy Plug Stowage Receptacle with Open Back for Front Panel Mount Accessories Shell Size H13 DIMENSIONS ±0.3 ±0.1 L3 Weight gr. 10 SL S S

58 Accessories KK General Duty Class A Cable Clamp Shell size KK - 6 A Basic Part Number MIL-DTL-5015 Compatible General Duty Cable Clamp GENERAL DUTY CLASS A CABLE CLAMP L3 D3 APPLICATION NOTES 1.. General duty Class A cable clamp suitable for jacketed or multipolar cable or wires protected by tubing. Standard materials confi guration consists of aluminum alloy with cadmium olive drab passivation IAW QQ-P Other types of front and rear connector accessories are available. See our website and/or contact the factory for complete information. 56

59 KK General Duty Class A Cable Clamp Accessories DIMENSIONS Part Number Connector Size Sleeve ±0.8 D3 ±0.8 ±0.8 L3 Weight gr. KK - 4A 10SL KT 10SL UNEF KK - 6A 14S KT 14S UNEF KK - 8A 16-16S IT UNEF KK - 10A 18 IT UNEF KK - 1A 0 - IT NEF KK- 16A 4-8 KT NEF KK - 0A 3 KT UNS KK - 4A 36 IT UNS

60 Accessories KT Neoprene Bushing for Cable Used with General Duty Class A Cable Clamps Shell size KK - 6 A Basic Part Number MIL-DTL-5015 Compatible General Duty Cable Clamp NEOPRENE BUSHING L D3 APPLICATION NOTES 1. Neoprene bushing for protection and reduction, used with Class A cable clamps.. Other types of front and rear connector accessories are available. See our website and/or contact the factory for complete information. 58

61 KT Neoprene Bushing for Cable Used with General Duty Class A Cable Clamps Accessories DIMENSIONS Connector Size Part Number ±0.1 ±0.1 D3 ±0.1 L ±0.1 Weight gr. 10SL KT 10SL S KT 14S S IT IT IT KT KT IT

62 Accessories DA1 and DA Front Panel Mount Receptacle Gasket Non-Conductive (DA... 1) and Conductive (DA... ) Shell size DA 18-1 Basic Part Number Mounting Gaskets for Front-Mounted Square Flange Receptacles DA = Non-Conductive DA... - = Conductive FRONT PANEL MOUNT RECEPTACLE GASKET DA1 Non-Conductive DA Conductive S E S E L L APPLICATION NOTES 1. Conductive and non-conductive gaskets for front-mount square fl ange receptacles.. Other types of front and rear connector accessories are available. See our website and/or contact the factory for complete information. 60

63 DA1 and DA Front Panel Mount Receptacle Gasket Non-Conductive (DA... 1) and Conductive (DA... ) Accessories Part Number Shell Size DIMENSIONS E ±0. L ±0.5 S 1 ±0.4 ±0. Weight gr. DA 10SL 10SL DA 14S 14S DA 16 16S DA DA ,0 0.5 DA DA DA DA

64 Accessories DH1 and DH Rear Panel Mount Receptacle Gasket Non-Conductive (DH... 1) and Conductive (DH... ) Shell size DH 18-1 Basic Part Number Mounting Gaskets for Front-Mounted Square Flange Receptacles DH = Non-Conductive DH... - = Conductive REAR PANEL MOUNT RECEPTACLE GASKET DH1 Non-Conductive DH Conductive S E S E L L APPLICATION NOTES 1. Conductive and non-conductive gaskets for rear panel-mount square fl ange receptacles.. Other types of front and rear connector accessories are available. See our website and/or contact the factory for complete information. 6

65 DH1 and DH Rear Panel Mount Receptacle Gasket Non-Conductive (DH... 1) and Conductive (DH... ) Accessories Part Number Shell Size DIMENSIONS E ±0. L ±0.5 1 ±0.4 S ±0. DH 10SL 10SL DH 14S 14S DH 16 16S DH DH ,0 0.5 DH DH DH DH DH g 63

66 Index Bayonet-Lock Index Product Line Overview...1 Applications... Available Components...3 Crimp Contact Connector Cross Reference...4 Crimp Contact Connector Technical Data...5 Master How to Order...6 Commercial Equivalent Product Line...7 Pin Contact Arrangements...8 Contact Arrangements and Alternate Keyway Positions...9 Contact Arrangements Front View...10 Pin Contacts...14 Socket Contacts...15 A Front Panel Wall Mount Receptacle...16 B1 and B Rear Panel Wall Mount Receptacle...18 C1 and C Bulkhead Feed-Thru Receptacle...0 D Straight Plug with Cable Clamp, Bushing and Wire Sealing Grommet... E 90 Plug with Cable Clamp, Bushing and Wire Sealing Grommet...4 E1 and K 90 Plug with Conduit Adapter (E1) and Grounding Fingers (K)...6 F In-Line Receptacle with Cable Clamp, Bushing and Wire Sealing Grommet...8 VG9434 G and T Straight Plug with Heat Shrink Boot Adapter (G), Grounding Fingers (T), and Wire Sealing Grommet...30 H and L Straight Plug with Conduit Adapter (H) and Grounding Fingers (L)...3 J1 and J Wall Mount Receptacle with Cable Clamp, Bushing & Wire Sealing Grommet, Threaded (J1) and Thru-Holes (J)...34 M Straight Plug with EMI/RFI Backshell, Grounding Fingers, Wire Sealing Grommet and Heat Shrink Boot Lip...36 N1 and N Wall Mount Receptacle with EMI/RFI Backshell and Heat Shrink Boot Lip, Sealing Grommet & Grounding Fingers...38 R1 Straight Plug w/ EMI/RFI Backshell, Grounding Fingers, Wire Sealing Grommet and Dual-Lip Shrink Boot Adapter...40 S1 and S Wall Mount Receptacle with EMI/RFI Backshell, Dual-Lip Heat Shrink Boot Adapter, Sealing Grommet and Grounding Fingers...4 U1 and U Wall Mount Receptacle with Heat Shrink Boot Adapter and Sealing Grommet...44 KB Protective Plug Cover with Stainless Steel Chain...46 KC Rope Lanyard End Termination for KB PLug Cover...47 KR Protective Receptacle Cover with Stainless Steel Chain...48 KA Rope Lanyard End Termination for KR Receptacle Cover...49 B0D Dummy Plug Stowage Receptacle with Open Back for Front Panel Mount...50 KK General Duty Class A Cable Clamp...5 KT Neoprene Bushing for Cable used with General Duty Class A Cable Clamps...54 DA1 and DAFront Panel Mount Receptacle Gasket, Non-Conductive (DA1), Conductive (DA)...56 DH1 and DH Rear Panel Mount Receptacle Gasket, Non-Conductive (DH1), Conductive (DH)

67 More Options Than Ever Before! Glenair Commercial Series ITS Reverse Bayonet Ruggedized Environmental Power and Signal Over 00 MIL-C-5015 Insert Arrangements Improved Reverse Bayonet Coupling Now VG 9534 Qualifi ed! United States United Kingdom Germany France Nordic Italy Spain Japan EU Sales: Glenair Italia, S.r.L. Tel: North American Sales: Glenair Connecticut, Tel: Factory Support: Commital S.p.a. (Italy) Tel: A World of Interconnect Solutions

68 A World of Interconnect Solutions Glenair, Inc. 111 Air Way Glendale, California Telephone: Fax: Glenair Industrial Power and Signal Connector Group 5 Village Lane Wallingford, CT 0649 Telephone: Facsimile: sales@glenair.com Glenair UK Ltd 40 Lower Oakham Way Oakham Business Park P.O. Box 37, Mansfi eld Notts, NG18 5BY England Telephone: Facsimile: sales@glenair.co.uk Glenair Microway Systems 7000 North Lawndale Avenue Lincolnwood, IL 6071 Telephone: Facsimile: Glenair Nordic AB Gustav III : S Boulevard 46 S Solna Sweden Telephone: Facsimile: sales@glenair.se Glenair Electric GmbH Siemensstrasse 9 D Steinbach Germany Telephone: Facsimile: germany@glenair.com Glenair Iberica C/ La Vega, Velada Spain Telephone: Facsimile: sales@glenair.es Glenair Italia S.R.L. Via Santi, Paderno Dugnano Milano, Italy Telephone: Facsimile: sales-italia@glenair.it Glenair France SARL 7, Avenue Parmentier Immeuble Central Parc # 3100 Toulouse France Telephone: Facsimile: sales@glenair.fr 008 Glenair, Inc.

QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS

QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS QULIFIED YONET-LOK ONNETORS RIMP-ONTT MIL-DTL-5015 TYPE ELETRIL ONNETORS FOR RUGGEDIZED POWER ND SIGNL PPLITIONS JUNE 2017 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage

More information

NFF QualiFied CoNNeCtors ith series Easy-to-assEmbly, Rigid insert PowER and signal REliablE REvERsE bayonet CouPling ConnECtoRs June 2013

NFF QualiFied CoNNeCtors ith series Easy-to-assEmbly, Rigid insert PowER and signal REliablE REvERsE bayonet CouPling ConnECtoRs June 2013 NF F 61030 Qualified C onn ec to r s ith series Easy-to-AssemblY, Power and Signal Reliable Reverse Bayonet Coupling June 2013 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High

More information

QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS

QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS QULIFIED YONET-LOK ONNETORS RIMP-ONTT MIL-DTL-5015 TYPE ELETRIL ONNETORS FOR RUGGEDIZED POWER ND SIGNL PPLITIONS JUNE 2017 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage

More information

SEACROW CONNECTORS MARINE BRONZE CONNECTORS FOR HARSH ENVIRONMENTAL APPLICATIONS

SEACROW CONNECTORS MARINE BRONZE CONNECTORS FOR HARSH ENVIRONMENTAL APPLICATIONS SEACROW CONNECTORS MARINE BRONZE CONNECTORS FOR HARSH ENVIRONMENTAL APPLICATIONS JUNE 2014 SEACROW CONNECTORS Marine Bronze Connectors for Harsh Environmental Applications Shipboard Application Glenair

More information

Features and Application

Features and Application MIL-DTL-38999 Features and Application Series II Features and Application MIL-DTL-38999 Series II connectors feature a bayonet coupling mechanism with lower profile design and rear-removable crimp contact

More information

THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS

THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL

More information

Amphenol 97 Series MIL-DTL-5015

Amphenol 97 Series MIL-DTL-5015 Amphenol 97 Series MIL-DTL-5015 MATES WITH ALL THREADED MIL-DTL-5015 CONNECTORS The 97 series is a durable, cost-effective MIL-DTL-5015 available in a variety of shell styles, sizes, contacts, and layouts.

More information

Cannon VG/CA-Bayonet. How to order VG Order reference. How to order Cannon Order reference. Explanation

Cannon VG/CA-Bayonet. How to order VG Order reference. How to order Cannon Order reference. Explanation How to order VG Order reference Series Shell style Dash Shell size Contact arrangement Contact type Contact termination Insulator position Explanation Series Shell style VG95234 A 32 6 S 1 N VG95234 J1,

More information

PART NUMBER BREAKDOWN CP A 70 1 W D H - 10

PART NUMBER BREAKDOWN CP A 70 1 W D H - 10 SERIES 70 EMI/RFI Shielding Backshell Non-Environmental Outer Shield Termination Series 70 Backshells provide EMI/RFI protection using ferrules to secure a cable s outer shield. They do not offer environmental

More information

Topside / Shipboard Environmental Connectors

Topside / Shipboard Environmental Connectors Seacrow Marine Bronze IPT-MB marine bronze connectors ipt-mb mil-c-26482 bayonet type / V95328 Compliant Marine Bronze Series IPT-MB connectors are the choice for reliability when 20-16 AW signal cables

More information

Amphenol 348 Series High Density Connectors

Amphenol 348 Series High Density Connectors 348 Series High Density Connectors 12-093-6 348 Series I, II Table of Contents 348 Series Page No. High Density Connectors........................................................................ 1 Specifications.................................................................................

More information

Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard

Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard Tri-Start Threaded Coupling General Information Page Guide Order... C29 Weight... C30 Plugs... C31 In-Line... C32 Square Flange... C33 Jam Nut... C34 PCB Sq Flange... C35 PCBJam Nut... C36 PCB Double Flange.

More information

Topside / Shipboard Environmental Connectors

Topside / Shipboard Environmental Connectors eacrow arine Bronze opside / hipboard I-B with solder cup or crimp contacts its-mb reverse-bayonet mil-c-5015 type / VG95234 EQUIVAEN arine Bronze eries I-B connectors are compliant with VG95234, using

More information

MIL-DTL 38999Series III Aluminium Series

MIL-DTL 38999Series III Aluminium Series MIL-DTL 38999Series III Aluminium Series 13 Connector part numbers Basic Series 8D 0-11 W 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI

More information

TABLE OF CONTENTS. Amphenol Aerospace is a Certified ISO 9001 Manufacturer.

TABLE OF CONTENTS. Amphenol Aerospace is a Certified ISO 9001 Manufacturer. This catalog covers the Amphenol /Matrix MIL-C- 83723, Series III Connectors. These connectors incorporate crimp rear release contacts. There is great diversity within this cylindrical family, with the

More information

38999 Series III Composite Connectors

38999 Series III Composite Connectors 8D Series Composite 38999 Series III Composite Connectors The RoHS connector with the best performance in weight saving and corrosion resistance for MilAero applications. MIL-DTL-38999 Standard Versatility

More information

KVBS Reverse bayonet connectors for railway applications

KVBS Reverse bayonet connectors for railway applications Reverse bayonet connectors for railway applications KVBS connector series derives from the RF CVBS one and it is based on Mil-DTL-5015 and VG95234 specs. The most important advantages are the simpler and

More information

VG95328 Qualified Bayonet-Lock Connectors

VG95328 Qualified Bayonet-Lock Connectors Qualified ayonet-lock onnectors igh-ensity MIL--26482 Type onnectors Qualified for Rugged Military and Industrial pplications United States United Kingdom Germany rance Nordic Italy Spain Japan Now rriving

More information

Amphenol. Amphenol /Matrix MIL-C-83723, Series III Connectors. Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments

Amphenol. Amphenol /Matrix MIL-C-83723, Series III Connectors. Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments Amphenol /Matrix MIL-C-, Series III Connectors -0- Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments Amphenol This catalog covers the Amphenol /Matrix MIL-C-, Series

More information

REVERSE BAYONET SINGLE-POLE CONNECTORS VG96929 HIGH-CURRENT, LOW-VOLTAGE POWER CONNECTORS FOR RUGGEDIZED MILITARY AND INDUSTRIAL APPLICATIONS

REVERSE BAYONET SINGLE-POLE CONNECTORS VG96929 HIGH-CURRENT, LOW-VOLTAGE POWER CONNECTORS FOR RUGGEDIZED MILITARY AND INDUSTRIAL APPLICATIONS RVRS YONT SINGL-POL ONNTORS HIGH-URRNT, LOW-VOLTG POWR ONNTORS OR RUGGIZ MILITRY N INUSTRIL PPLITIONS RURY 2019 High Voltage lectrical Power istribution rom 0 to 60 in 3.9 Seconds High voltage electrical

More information

MIL-DTL Series III Connectors

MIL-DTL Series III Connectors RELIABLE Self-locking threaded coupling 100% scoop proof Contact retention system provides excellent contact retention under severe vibration EMI PROTECTED Grounding fingers for excellent EMI protection

More information

38999 All In One! Series III Integrated Backshell

38999 All In One! Series III Integrated Backshell 38999 Series III Integrated Backshell 38999 All In One! Plug with integrated backshell: all the features and the benefits of 38999 Series III connectors now ready to use. Embedded backshell EMI backshell

More information

MIL-DTL-38999Series III Composite Series

MIL-DTL-38999Series III Composite Series MIL-DTL-38999Series III Composite Series 25 Connector part numbers Basic Series 8D 0-11 J 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 5: Plug with RFI shielding. Type: -: Connectors

More information

Amphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors

Amphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors Amphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors 12-026-2 Crimped Rear Release Qualified for Environmental and Firewall Applications Amphenol This catalog covers the Amphenol /Matrix MIL-C-

More information

MIL-C (Series 1, 2, 3 & 4) Updated February 2013 (Rev )

MIL-C (Series 1, 2, 3 & 4) Updated February 2013 (Rev ) MIL-C-3 (Series, 2, 3 & 4) Updated February 23 (Rev 23-2) ABN: 6 2 6 24 The D3 Series of connectors were designed for both performance and mechanical robustness to meet many demanding applications in:

More information

MIL-DTL SERIES III CONNECTORS RUGGED, HARSH ENVIRONMENT SUBMINIATURE CONNECTORS

MIL-DTL SERIES III CONNECTORS RUGGED, HARSH ENVIRONMENT SUBMINIATURE CONNECTORS QUICK REFERENCE GUIDE Wide Range Mil spec, commercial, and composite Full line of finishes, including black zinc nickel and PTFE nickel High Performance Environmentally sealed DEUTSCH MIL-DTL-38999 SERIES

More information

ITT Cannon KJL Series MIL-DTL Series I Connectors

ITT Cannon KJL Series MIL-DTL Series I Connectors APPLICATIONS FEATURES ITT Cannon KJL Series MIL-DTL-38999 Series I Connectors High performance military aircraft Commercial airlines Communications equipment Armored personnel carriers & tanks QUICK-MATING

More information

SUPERSEAL MIL-DTL-5015 TYPE REVERSE-BAYONET CONNECTORS: NOW WITH SUPERIOR SEALING, SHIELDING AND CRIMP CONTACT TERMINATION

SUPERSEAL MIL-DTL-5015 TYPE REVERSE-BAYONET CONNECTORS: NOW WITH SUPERIOR SEALING, SHIELDING AND CRIMP CONTACT TERMINATION RJ45 ETHERNET SUPERSEAL MIL-DTL-5015 TYPE REVERSE-BAYONET CONNECTORS: NOW WITH SUPERIOR SEALING, SHIELDING AND CRIMP CONTACT TERMINATION FIELD-READY RJ45 ETHERNET MIL-DTL-5015 TYPE REVERSE-BAYONET SUPERSEAL

More information

EN3716 SAE AS81659 ARINC

EN3716 SAE AS81659 ARINC 6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical

More information

MIL-DTL Series IV Connectors

MIL-DTL Series IV Connectors DEPENDABLE Secure breech lock coupling 100% scoop-proof Pin-to-pin mating protection helps prevent failures RUGGED Mated connectors help withstand high-impact shock Rear accessory threads help provide

More information

8D Series D38999 Aluminum Series

8D Series D38999 Aluminum Series onnector part numbers Basic Series 8D 0-11 W 35 P N L style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI shielding Also available:. Square flange receptacle

More information

D X X - XX - XX - X X

D X X - XX - XX - X X CONSTRUCTION MATERIAL FINISH Shell Alluminium Alloy Cadmium Olive Drab over Electroless Nickle Electroless Nickle Insert Engineering Plastic Natural O-ring Silicone Rubber Natural Contact Retainer Beryllium

More information

CA-COM Industrial Connectors

CA-COM Industrial Connectors CA-COM Industrial Connectors ITT Corporation ITT is a diversified leading manufacturer of highly engineered critical components and customized technology solutions for the energy, transportation and industrial

More information

POLAMCO HIGH POWER CONNECTORS STYLE

POLAMCO HIGH POWER CONNECTORS STYLE POLAMCO HIGH POWER CONNECTORS 38999 STYLE Robust & reliable connectors designed for harsh environments Contents Part Description System... 4 Materials... 4 Plating Options... 5 SECTION ONE: Plugs 1.1 Shielded

More information

Proven Quality, Reliability & Expertise

Proven Quality, Reliability & Expertise CA Threaded Catalog Proven Quality, Reliability & Expertise ITT Cannon is a leading global manufacturer of connector products serving international customers in the aerospace and defense, medical, energy,

More information

SCE. Snatch Connector Electrical Series

SCE. Snatch Connector Electrical Series SCE Snatch Connector Electrical Series SCE is a miniature product with a silent push to mate and pull to release design across two styles of cable receptacles. All inserts and contacts are moulded in place,

More information

97 series crimp type plugs with solid shells

97 series crimp type plugs with solid shells 97 series crimp type plugs with solid shells 97-4106A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/8 34.93 3/4 19.057/8 22.23 5/8-24 12S 1-7/16 36.50 25/32 19.84 1 25.40 5/8-24

More information

MIL-C Fiber Optic Connectors

MIL-C Fiber Optic Connectors Developed and produced by Packard-Hughes Interconnect (PHI), the MIL-C-28876 Fiber Optic Connector features low optical insertion loss, repeatability, exceptional strain relief, and reliability in harsh

More information

8D Series D38999 Composite Series

8D Series D38999 Composite Series Connector part numbers Basic Series 8D 0-11 J 35 P N L Shell style: 0: Square flange receptacle 5: Plug with RFI shielding Type: - : Connectors with standard crimp contacts. L: Receptacle with long PC

More information

HT STRAIGHT ADAPTER, WRENCH FLATS ( )

HT STRAIGHT ADAPTER, WRENCH FLATS ( ) HT7006 - STRAIGHT ADAPTER, WRENCH FLATS (12387118) MIL-DTL-38999 SERIES III; MIL-DTL-38999 SERIES IV HT7 0 06-11 - 6-8 SERIES ADAPTER ANGLE STRAIGHT - 0 CONNECTOR SERIES (INTERFACE) FINISH 8 - ELECTROLESS

More information

Integrated Backshell Fire Proof Connector

Integrated Backshell Fire Proof Connector 8535/8536 Series Integrated Backshell Connectors Integrated Backshell Fire Proof Connector Stainless steel screw coupling connector designed for use in aviation harsh environments. Perfect for engines

More information

CL-3/1297 CGL INDUSTRIAL POWER INPUT CONNECTORS UP TO 700 V

CL-3/1297 CGL INDUSTRIAL POWER INPUT CONNECTORS UP TO 700 V CL-3/1297 INDUSTRIAL POWER INPUT CONNECTORS UP TO 700 V Contents Introduction... 2 Features... 3 How to Order... 4 Part Number Explanation... 5 Technical Data... 6 250 / 500 Volt Contact Arrangements...

More information

MIL-DTL Series 1 Solder Type PT

MIL-DTL Series 1 Solder Type PT MIL-DTL-26482 Series 1 Solder Type PT The Amphenol Miniature Cylindrical Connector Series offers high density contact arrangements in a miniature, circular metal shell. This connector is environmentally

More information

06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING

06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING LENGTH STYLE Y SPECIFICATION: WHEN THE DESIRED ADAPTER S C DIAMETER IS

More information

8STA/8TA Series. Compact Circular Connectors Derived from MIL-DTL & JN1003. Connection Technologies

8STA/8TA Series. Compact Circular Connectors Derived from MIL-DTL & JN1003. Connection Technologies 8STA/8TA Series Compact Circular Connectors Derived from MIL-DTL-38999 & JN1003 Connection Technologies 8STA/8TA Series Contents Overview Presentation... 06 Applications... 06 Features & benefits... 07

More information

ABCIRH. Connectors. Halogen Free Bayonet Lock Connector Series

ABCIRH. Connectors. Halogen Free Bayonet Lock Connector Series Connectors Halogen Free Bayonet Lock Connector Series Company Profile TT Electronics brand AB Connectors specialises in the design, test and manufacture of high performance electronic connectors and interconnect

More information

Electrical Dielectric withstanding Altitude Service At ground 1500 Vrms m 600 Vrms m 400 Vrms m 200 Vrms

Electrical Dielectric withstanding Altitude Service At ground 1500 Vrms m 600 Vrms m 400 Vrms m 200 Vrms Applications Engine area/sensors in harsh environments, railways (brake system), for all purposes in severe climatical environment and high temperature. Standards NFL 54143 - EN 2997 Description Screw

More information

8D Series D38999 Composite Series

8D Series D38999 Composite Series Connector part numbers Basic Series 8D 0-11 J 35 P N L Shell style: 0: Square flange receptacle 5: Plug with RFI shielding Type: -: Connectors with standard crimp contacts. L: Receptacle with long PC tail

More information

SRC SERIES. Signal Connectors with bayonet locking system. Derived from VG95234 & in accordance with the NF F standard

SRC SERIES. Signal Connectors with bayonet locking system. Derived from VG95234 & in accordance with the NF F standard SERIES Signal Connectors with bayonet locking system Derived from VG9523 & in accordance with the NF F 61-030 standard SERIES /// SIGNAL CONNECTORS Contents Main Characteristics... 2 Synoptic...3- Synoptic:

More information

WILDCAT CONNECTORS

WILDCAT CONNECTORS UTSCH WILCAT 38999 CONNCTORS Higher contact densities in a familiar MIL-TL-38999 form factor AROSPAC, FNS & MARIN /// UTSCH WILCAT 38999 CONNCTORS 60 0 80 36 65 88 5 5 8 0 90 70 UTSCH WILCAT 38999 CONNCTORS

More information

AMPHENOL PCD SHENZHEN ASGTC. Ruggedized Connector Series for Rail & Mass Transit and Other Harsh Environmental Applications.

AMPHENOL PCD SHENZHEN ASGTC. Ruggedized Connector Series for Rail & Mass Transit and Other Harsh Environmental Applications. AMPHENOL PCD SHENZHEN ASGTC Ruggedized Connector Series for Rail & Mass Transit and Other Harsh Environmental Applications 1 www.amphenolpcd.com.cn CONTENT CONTENT ASGTC Series Connector structure.........

More information

RJF TV. Amphenol ROHS. Ethernet Connection System for Harsh Environment. Part Number Code RJF TV

RJF TV. Amphenol ROHS. Ethernet Connection System for Harsh Environment. Part Number Code RJF TV RJF TV Ethernet Connection System for Harsh Environment ROHS compliant N & BZ RJFTV allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks in harsh environments.

More information

Series 80 Mighty Mouse Technical Reference Complete Product Specification

Series 80 Mighty Mouse Technical Reference Complete Product Specification Summary Performance Specifications Current Rating (Maximum): Size #23 Contact: 5 A., Size #20 contact: 7.5 A., Size #16 contact: 13 A., Size #12 contact: 23 A. Test Voltage (Dielectric Withstanding Voltage)

More information

MIL-C Circular Connectors

MIL-C Circular Connectors MIL-C-28840 Circular Connectors A high density, harsh environment connector designed to meet the most demanding environmental conditions and RFI/EMI shielding requirements. Delphi Connection Systems delivers

More information

HBB CONNECTOR SERIES. Engineering Superior Solutions. September 2015 Smiths Connectors. smithsconnectors.com

HBB CONNECTOR SERIES. Engineering Superior Solutions. September 2015 Smiths Connectors. smithsconnectors.com HBB CONNECTOR SERIES Engineering Superior Solutions September 2015 Smiths Connectors HBB CONNECTOR SERIES High Power, Quick Release Connectors 2 Table of Contents 4 PRODUCT OVERVIEW 9 COMPETITIVE ADVANTAGES

More information

Features and Application

Features and Application ML-DTL-83723 Series Features and Application Bayonet and Threaded Coupling Features and Application ML-DTL-83723 Series family offers connectors with bayonet and threaded coupling including lanyard-release

More information

MG RANGE CONTENTS. General Specification Shell Styles... 4, 5, 6. Ordering Information Connectors... 7

MG RANGE CONTENTS. General Specification Shell Styles... 4, 5, 6. Ordering Information Connectors... 7 CONTENTS General Specification........ 3 Shell Styles..... 4, 5, 6 Ordering Information Connectors... 7 Ordering Information Protective Caps... 8 Ordering Information Square Gaskets... 8 Insert Configurations.

More information

Amphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003

Amphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003 Amphenol eries SJT Series SJT VG 96912, Series 1 PAN 6433-2 JN 1003 Ordering information Ordering example: SJT G 06 RT 14-35 P A 014 Series (p. 9, 15, 18) SJT Scoop proof (100% scoop-proof) Junior (Miniature

More information

Circular. Cannon VG/CA-Bayonet

Circular. Cannon VG/CA-Bayonet Cannon VG/C-Bayonet Introduction Cannon C-Bayonet series was designed in accordance with the VG95234 specification. This versatile and highly reliable connector series is an improvement on the well established

More information

CA Bayonet / VG95234 Connectors

CA Bayonet / VG95234 Connectors CA Bayonet / VG953 Connectors Proven Quality, Reliability & Expertise ITT s Cannon brand is a leading global manufacturer of connector products serving international customers in the aerospace and defense,

More information

Circular Connectors. Contents. Introduction Specifications Cable Connectors Panel Connectors Accessories

Circular Connectors. Contents. Introduction Specifications Cable Connectors Panel Connectors Accessories ircular onnectors ontents Introduction Specifications able onnectors Panel onnectors ccessories ircular onnectors These connectors are designed for use in harsh environments. The high specification connectors

More information

Allen Electric Connector Sales, Inc. (AECS, Inc.)

Allen Electric Connector Sales, Inc. (AECS, Inc.) Allen Electric Connector Sales, Inc. (AECS, Inc.) A Woman owned small business since 1996, AECS, Inc. offers military circular electric connectors, connector accessories, custom design connectors, custom

More information

Features and Application

Features and Application ML-DTL- Features and Application MS2426*/AE66* Features and Application ML-DTL- family offers connectors with bayonet coupling as well as threaded coupling. These connectors are intermateable with correspondingly

More information

2M805 Tri-Start Threaded Coupling

2M805 Tri-Start Threaded Coupling 2M805 Tri-Start Threaded Coupling General Information 2M Specs 2M801 2M803 2M804 2M805 Series Micro Miniature Connectors: s 2M805 Series of connectors offers the best EMI and Vibration performance among

More information

Cannon Mil-DTL Class G Space Grade Connectors. Interconnect Solutions

Cannon Mil-DTL Class G Space Grade Connectors. Interconnect Solutions Cannon Mil-DTL 38999 Class G Space Grade Connectors Interconnect Solutions The Challenge Our traditional and longest served Space System customers approached ITT ICS regarding the deployment of Mil-DTL

More information

Amphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments

Amphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments Amphenol GT eries Reverse Bayonet Coupling Connectors 12-024-7 Ruggedized Connector eries for Rail/ass Transit and other Harsh Environments Amphenol Table of Contents age o. Amphenol GT eries Reversed

More information

Electrical Test voltage (Vrms) Service sea level at m M I II

Electrical Test voltage (Vrms) Service sea level at m M I II 8LT eries Applications High density connectors for all military and aeronautical purposes. tandards MIL-C 38999 eries I - QPL approved NC 93422 HE 308 DTAT-C 5935 X 0005 (HE 308 standard) GAM/T1 list Description

More information

MILITARY MOTORSPORT INDUSTRIAL PRODUCT RANGE

MILITARY MOTORSPORT INDUSTRIAL PRODUCT RANGE MILITARY MOTORSPORT INDUSTRIAL PRODUCT RANGE ABOUT US VGL Impex Pty Ltd, trading as Allied Connectors, is an Australian based distributor of industrial electrical components and complementary products.

More information

High Performance, Microminiature Circular Connectors

High Performance, Microminiature Circular Connectors High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type

More information

8N45S NC Series Non-safety classified connectors for EPR reactors

8N45S NC Series Non-safety classified connectors for EPR reactors Description Quick-connect ¼ turn bayonet coupling mechanism Straight backshell with sealing gland and cable clamp Integrated 60 ground termination mechanism compliant with EPR reactors wiring specifications

More information

ACT AND DTS SERIES CONNECTORS EN3645 SPECIFICATION QUALIFIED

ACT AND DTS SERIES CONNECTORS EN3645 SPECIFICATION QUALIFIED DEUTSCH ACT AND DTS SERIES CONNECTORS EN3645 SPECIFICATION QUALIFIED Reliable and Versatile Range of Connectors for Harsh Environment Aerospace and Military Applications CONTENTS Introduction 03 Technical

More information

DEUTSCH HDJ Series Filter Connectors MIL-DTL SERIES I.5

DEUTSCH HDJ Series Filter Connectors MIL-DTL SERIES I.5 DEUTSCH HDJ Series connectors are subminiature environment-class connectors with high and medium-density insert arrangements. They are based on MIL-DTL-38999 Series I coupling interface lengths and Series

More information

Type N connectors DIVIDER PAGE

Type N connectors DIVIDER PAGE Type N connectors DIVIDER PAGE 179 N interface dimensions E D REF. PLANE REF. PLANE C D ØF ØB ØA ØA ØB ØE SEALING GASKET.625-24UNEF-2B G C H MIN. FULL H J F G MIN. FULL "N", MALE, Mil-Std-348A Fig. 304.1.140.110

More information

High Performance, Microminiature Circular Connectors

High Performance, Microminiature Circular Connectors High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,

More information

PEGASUS SERIES. Amphenol Pcd. Amphenol Pcd

PEGASUS SERIES. Amphenol Pcd. Amphenol Pcd PEGASUS SERIES Amphenol Pcd Amphenol Pcd is one of the world s leading suppliers of interconnect products for Military, Commercial Aerospace and Industrial applications. Located north of Boston in Beverly,

More information

MINIATURE MIL-DTL TYPE AUDIO FREQUENCY CONNECTORS

MINIATURE MIL-DTL TYPE AUDIO FREQUENCY CONNECTORS SERIES 151 MINIATURE MIL-DTL-55116 TYPE AUDIO FREQUENCY CONNECTORS FEBRUARY 2012 SERIES 151 MINIATURE MIL-DTL-55116 TYPE AUDIO FREQUENCY CONNECTORS HIGH RELIABILITY PERFORMANCE FOR MISSION-CRITICAL COMMUNICATION

More information

KJL. KJL MIL-DTL Series I. MIL-DTL Series I. Applications. Features

KJL. KJL MIL-DTL Series I. MIL-DTL Series I. Applications. Features Applications Features High Performance ilitary Aircraft Commercial Airlines Communications Equipment Armored Personnel Carriers & Tanks Quick ating A three point bayonet coupling system that not only makes

More information

HERMETIC. Hermetic Connectors. High Performance Sealing Solutions

HERMETIC. Hermetic Connectors. High Performance Sealing Solutions HERMETIC Hermetic Connectors High Performance Sealing Solutions Hermetic Connectors 38999 QPL Qualified Presentation Based on glass to metal seal technology, SOURIAU offers hermetic connectors to cover

More information

AC Series. Threaded Coupling Connectors MIL-C-5015 Commercial & QPL d. cinch.com

AC Series. Threaded Coupling Connectors MIL-C-5015 Commercial & QPL d. cinch.com AC Series Threaded Coupling Connectors MIL-C-5015 Commercial & QPL d cinch.com PRODUCT INDEX AC Series Threaded Coupling Connectors MIL-C-5015 Commercial & QPL d Contents Nomenclature Guide 4 Product Data

More information

Amphenol. Bombardier Transportation Design Guide for Amphenol GT Series Reverse Bayonet Coupling Connectors

Amphenol. Bombardier Transportation Design Guide for Amphenol GT Series Reverse Bayonet Coupling Connectors Bombardier Transportation Design Guide for Amphenol GT Series Reverse Bayonet Coupling Connectors -2123 Date: 10-01-2004 FOR USE BY BOMBARDIER & BOMBARDIER S SUBCONTRACTORS Amphenol Table of Contents Page

More information

Cannon Trident Connectors

Cannon Trident Connectors Neptune is a range of circular connectors specifically designed for harsh environment applications. They come with membrane wire seals that meet the requirements for IP67 and do not require blanking plugs

More information

PART NUMBER BREAKDOWN

PART NUMBER BREAKDOWN SERIES 34 O-Ring Sealed Shorting Cap Series 34 Shorting Caps are for use at the rear of shorting plugs, special test connectors, fiber optic loopbacks and other applications. variety of lanyard options

More information

Modular Bayonet connectors: a flexible solution for data and signals transmission in railways harsh environment.

Modular Bayonet connectors: a flexible solution for data and signals transmission in railways harsh environment. GM Modular Bayonet connectors: a flexible solution for data and signals transmission in railways harsh environment. Passenger control Networking and lighting control Diagnostic support for brakes, motors

More information

DATA-CON-X : SEALED USB TYPE A & B CONNECTORS

DATA-CON-X : SEALED USB TYPE A & B CONNECTORS FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when mated) Feed-thru termination on the panel for easy field installation Field installable design is easy to assemble Quick connect bayonet or

More information

Cannon Trident Connector System

Cannon Trident Connector System is a range of circular connectors specifically designed for harsh environment applications. They come with membrane wire seals that meet the requirements for IP67 and do not require blanking plugs for

More information

D-subminiature Backshells - Two-Piece D*H Series

D-subminiature Backshells - Two-Piece D*H Series Backshells - Two-Piece D*H Series Standard two-piece construction available in plastic, metallized plastic, or diecast zinc versions with 180 straight cable entry. Fits standard metal shell D-subminiature

More information

Cover headline Cover headline CGE / VG96929 High Power Connectors

Cover headline Cover headline CGE / VG96929 High Power Connectors Cover headline Cover headline CGE / VG96929 High Power Connectors We Connect When it matters most For more than a century, ITT Cannon has developed innovative interconnect solutions for the world s harshest

More information

Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle

Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle 801-009 and 801-010 - Ordering Information In-Line Style 01 Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02 How To Order

More information

Amphenol Amphenol PCD Shenzhen HVBI High Voltage with Inter-Lock

Amphenol Amphenol PCD Shenzhen HVBI High Voltage with Inter-Lock Amphenol Amphenol PCD Shenzhen HVBI High Voltage with Inter-Lock www.amphenolpcd.com.cn CONTENT HVBI PRODUCT INTRODUCTION............ 2 HOW TO ORDER: RECEPTACLE...... 3 alternate KEYING positions............

More information

A Complete Miniature Range Threaded, Break Away, Bayonet

A Complete Miniature Range Threaded, Break Away, Bayonet omplete Miniature Range Threaded, reak way, ayonet onnection Technologies Presentation The micro38999 ranges are made to meet a new generation of applications where space and weight are limited (Tactical

More information

Connection Systems. Bulls-Eye Subminiature Circular Connectors

Connection Systems. Bulls-Eye Subminiature Circular Connectors Connection Systems Bulls-Eye Subminiature Circular Connectors Connection Systems Bulls-Eye Subminiature Circular Connectors Hit the target every time with our high density connectors that provide high

More information

Luminus Series Amphenol Pcd

Luminus Series Amphenol Pcd Luminus Series Amphenol Pcd Amphenol Pcd Pcd is is one one of of the the world s leading suppliers of of interconnect products for for Military, Commercial Aerospace and and Industrial applications. Located

More information

K2 Qualified Connectors for EPR Reactor

K2 Qualified Connectors for EPR Reactor Reactor Class 1E connector with quick connect 1/4 turn bayonet coupling and shielding continuity designed to operate during normal & seismic conditions. K2 Qualified / RCC-E 2005 Compliant with EPR wiring

More information

TE Connectivity DEUTSCH Single Module EN4165 connectors

TE Connectivity DEUTSCH Single Module EN4165 connectors Applications Cabin and avionic systems High-performance military aircraft Commercial airlines Communications equipment Missiles Military Railway TE Connectivity DEUTSCH Single Module EN4165 Connectors

More information

D-Subminiature EMI/RFI Shielding Interconnection Systems

D-Subminiature EMI/RFI Shielding Interconnection Systems Amphenol Amphenol PCD Shenzhen D-Subminiature EMI/RFI Shielding Interconnection Systems www.amphenolpcd.com.cn Product profile RR-HR D-Sub connectors - stamped and formed contacts REAR RELEASE CRIMP CONNECTORS

More information

Underwater /Subsea Connectors and Cables. Deep Water Topside Downhole Shallow Water

Underwater /Subsea Connectors and Cables. Deep Water Topside Downhole Shallow Water Underwater /Subsea Connectors and Cables Deep Water Topside Downhole Shallow Water Glenair Marine / Subsea Connectors and Cables High pressure, harsh environment underwater / topside Subsea Deep Water

More information

FR ITS RJ45-1 W PHM F6

FR ITS RJ45-1 W PHM F6 CODE SCALE SERIES SHEET WEIGHT CODE SCALE SERIES DESCRIPTION SHEET.2x45 R.2 Max. Max. specific indicationweight DATE File:RECEPTACLE_FEMM--PCB_3 - Copia DESCRIPTION.2x45 R.2 Max. Max. DATE File:RECEPTACLE_FEMM--PCB_3

More information

HBB power connector. Product description

HBB power connector. Product description HBB power connector Product description Contact technology guarantees high reliability Push lock to mate connector Quick release latch to unmate Ruggedised metal and plastic versions available Cable and

More information

45 YEARS OF EXPERIENCE

45 YEARS OF EXPERIENCE ENGINE CONNECTORS 45 YEARS OF EXPERIENCE High Performance Connectors for Critical Environment Temperature Up to 350ºC / 662ºF Vibrations Fire Corrosion 45 YEARS OF EXPERIENCE OLD PRODUCTS DBA 3x NEW GENERATION

More information

개요 (Overview) 절연체 (Insulator)

개요 (Overview) 절연체 (Insulator) 개요 (Overview) VG924 규격과일치하는, YH-Bayonet 시리즈커넥터입니다. 이커넥터는 MIL-TL-01의나사식결합방식을 bayonet 방식으로개량하여결합 / 분리가쉽도록제작된커넥터입니다. 진동에의한유체침투로부터보호를목적으로하는곳에사용하는데적합하도록설계된제품이며, 결합 / 분리가쉽도록설계되었습니다. 항공기및군용차량, 전차, 배등의장비및정보통신장비등에사용되고있습니다.

More information